In-Line Filters. Section Index. High FPK
|
|
|
- Grace Morton
- 5 years ago
- Views:
Transcription
1 Hydraulic In-Line Filters Section Index NEW Medium Pressure Filters FMK-FM FCK-LC HMK04 Duramax HMK05 Duramax High Pressure Filters FPK 02 & 04 - AP FPK 02 - AP FPK 03 & 04 - AP FCK-LC MEDIUM PRESSURE Donaldson Distributors can request a quote for a seperate head, housing and element up to the specific customer requirements via their Donaldson sales contact. They must identify in a proper manner the necessary components. Hydraulic Filters & Accessories for Mobile Engine Applications 118
2 FPK 02 & 04 - AP220 Technical Data Filter head casting in spheroidal cast iron. Extruded steel bowl. Operating pressure up to 42 Mpa (420 bar) for FPK / AP and up to 30 Mpa ( bar) for FPK / AP Filter Elements Synteq synthetic media ( micron), reinforced with wire mesh Collapse resistance 2 MPa (20 bar) per ISO (They can also be supplied at 21 MPa (210 bar) on customer's request). Static pressure testing up to 63 MPa (630 bar) for FPK / AP and up to 45 Mpa (4 bar) for FPK / AP Fatigue pressure of cycles at 0-30 MPa (0 - bar) per NFPA T R2:2000 By-pass valve setting 3 kpa (3,5 bar) for FPK / AP and 600 kpa (6 bar) for FPK / AP Operating temperature C. Compatibility hydraulic fluids per ISO Flow rate and pressure drop per ISO3968 with oil kinematic viscosity 30 cst at 40 C and density 0,875 kg/dm ³. Ports threaded per ISO 228/1. Donaldson Distributors can request a quote for a seperate head, housing and element up to the specific customer requirements via their Donaldson sales contact. They must identify in a proper manner the necessary components. Hydraulic Filters & Accessories for Mobile Engine Applications 132
3 FPK 02 & 04 - AP220 Specifications INDICATOR P INCLUDED IN BOX INDICATOR P INSTALLED RMF* = Recommanded Maximum Flow in l/min. Service Indicators ONLY APPLICABLE FOR AP 221 & AP 222 ELECTRICAL DIFFERENTIAL PRESSURE INDICATOR P N.O. contacts P N.C. contacts Settings: 270 kpa (2,7 bar) Max. values: 30 DCV - 0,2 A VISUAL DIFFERENTIAL PRESSURE INDICATOR P Settings: kpa (3 bar) ELECTRICAL DIFFERENTIAL PRESSURE INDICATOR 2 WIRES, CANON CONNECTOR P N.O. contacts P N.C. contacts Settings: 270 kpa (2,7 bar) Max. values: 30 DCV - 0,2 A res. ELECTRICAL DIFFERENTIAL PRESSURE P Settings: kpa (3 bar) Max. values: 2 ACV 30 DCV - 5 A res. and ind. Protection class: IP 65 Cable clamp: PG Hydraulic Filters & Accessories for Mobile Engine Applications
4 FPK 02 & 04 - AP220 DIMENSIONS ELEMENT (mm) O P Q AP 221 AP 222 AP 223 AP 224 AP 225 Q Hydraulic Filters & Accessories for Mobile Engine Applications 134
5 FPK 02 & 04 - AP220 Performance Curves ONLY APPLICABLE FOR AP AP 222 ONLY APPLICABLE FOR AP AP224 - AP225 SIZE SIZE 1 SIZE /01 Dp (kpa) /02 /03 25 housing Q (L/min) AP223S.grf SIZE SIZE 3 SIZE / /02 Dp (kpa) housing / Q (L/min) AP223M.grf SIZE 4 SIZE housing 1 /01 Dp (kpa) /02 / Q (L/min) AP223L.grf 135 Hydraulic Filters & Accessories for Mobile Engine Applications
6 FPK 02 - AP2 Technical Data Filter head casting in spheroidal cast iron. Extruded steel bowl. Operating pressure up to 42 MPa (420 bar) Static pressure testing up to 63 MPa (630 bar). Filter Elements Synteq synthetic media ( micron), reinforced with wire mesh. Collapse resistance 2 MPa (20 bar) per ISO (They can also be supplied at 21 MPa (210 bar) on customer's request). Fatigue pressure of cycles at 0-30 MPa (0 - bar) per NFPA T By-pass valve setting 600 kpa (6 bar) per ISO3968. Operating temperature C. Compatibility hydraulic fluids per ISO Flow rate and pressure drop per ISO3968 with oil kinematic viscosity 30 cst at 40 C and density 0,875 kg/dm ³. Ports threaded per ISO 228/1. Donaldson Distributors can request a quote for a seperate head, housing and element up to the specific customer requirements via their Donaldson sales contact. They must identify in a proper manner the necessary components. Hydraulic Filters & Accessories for Mobile Engine Applications 136
7 FPK 02 - AP2 Specifications SIZE RMF* RMF* RMF* RMF* = Recommanded Maximum Flow in l/min. Service Indicators VISUAL DIFFERENTIAL PRESSURE INDICATOR P (6.06) Setting: 0 kpa (5 bar) VISUAL ELECTRICAL DIFFERENTIAL PRESSURE INDICATOR P (7.03) P (7.06) with thermostat at min. temperature at 30 C Setting: 0 kpa (5 bar) Max. values: 2 ACV - 30 DCV - 5 A res.and ind. Protection class: IP 65 Cable clamp: PG 11 ELECTRICAL DIFFERENTIAL PRESSURE INDICATOR P Setting: 0 kpa (5 bar) Max. values: 2 ACV - 30 DCV - 5 A res.and ind. Protection class: IP 65 Cable clamp: PG Hydraulic Filters & Accessories for Mobile Engine Applications
8 FPK 02 - AP2 Hydraulic Filters & Accessories for Mobile Engine Applications 138
9 FPK 02 - AP2 Performance Curves SIZE 358 SIZE 359 SIZE 360 BY-PASS SIZE Hydraulic Filters & Accessories for Mobile Engine Applications
10 FPK 03 & 04 - AP420 Technical Data Filter head casting in spheroidal cast iron. Extruded steel bowl. Operating pressure up to 42 MPa (420 bar) Static pressure testing up to 63 MPa (630 bar). Fatigue pressure of cycles at 0-30 MPa (0 - bar) per NFPA T By-pass valve setting 600 kpa (6 bar) per ISO Filter Elements Synteq synthetic media ( micron), reinforced with wire mesh. Collapse resistance 2 MPa (20 bar) per ISO They can also be supplied at 21 MPa (210 bar) on customer's request with High Collapse Element AP 5xx.5x (Ex. AP ). Reverse flow valve which allows fluid to pass s through the element in one direction but to by-pass the element when the flow is reversed. ed. Operating temperature C. Compatibility hydraulic fluids per ISO Flow rate and pressure drop per ISO3968 with oil kinematic viscosity 30 cst at 40 C and density 0,875 kg/dm ³. Ports threaded per ISO 228/1 or flanged per SAE J PSI. Drilled holes foreseen for indicator. Donaldson Distributors can request a quote for a seperate head, housing and element up to the specific customer requirements via their Donaldson sales contact. They must identify in a proper manner the necessary components. Hydraulic Filters & Accessories for Mobile Engine Applications 140
11 FPK 03 & 04 - AP420 Specifications /03 23(c) RMF* SIZE 361 =1000 RMF* TYPE ELEMENT K AP P AP K AP P AP P AP EX.: AP V = ERSE FLOW REVERSE ADDITIO NS K AP P AP P AP P AP P AP P AP K AP P AP K AP P AP P AP K AP P AP K AP K AP ADDITIO NS RMF** = Recommanded Maximum Flow in l/min K AP K AP K AP P AP P AP P AP P AP P AP K AP K0307 AP V P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP K AP K0306 AP V K AP K AP K AP K AP V K AP K AP V ELEMENT /01 TYPE EX.: AP = H COLLAPSE ELEMENT HIGH RMF* /02 SYNTHETIC MEDIA 11(c)=1000 K AP K0 AP V K AP K AP V K AP K AP K AP (c) TYPE ELEMENT 40 K AP P AP K AP P AP P AP Q K AP K AP K AP V K AP K AP V K0406 AP K AP K AP VISUAL DIFFERENTIAL PRESSURE INDICATOR P (6.06) Setting: 0 kpa (5 bar) 141 Hydraulic Filters & Accessories for Mobile Engine Applications K AP K AP Service Indicators VISUAL ELECTRICAL DIFFERENTIAL PRESSURE INDICATOR P (7.03) P (7.06) with thermostat at min. temperature at 30 C Setting: 0 kpa (5 bar) Max. values: 2 ACV - 30 DCV - 5 A res.and ind. Protection class: IP 65 Cable clamp: PG 11 =1000 RMF* ELECTRICAL DIFFERENTIAL PRESSURE INDICATOR P Setting: 0 kpa (5 bar) Max. values: 2 ACV - 30 DCV - 5 A res.and ind. Protection class: IP 65 Cable clamp: PG 11 K AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP P AP
12 FPK 03 & 04 - AP420 DIMENSIONS ASSY (mm) DIMENSIONS ELEMENT (mm) A B C D E F G H I L M N O P Kg. Q R S G 1/ , M10 Hex30 6, G 1/ , M10 Hex30 6, G 1/ , M10 Hex30 6, G 3/ , M10 Hex30 6, G 3/ , M10 Hex30 6, G 3/ , M10 Hex30 6,7 3/4 SAE , M10 Hex30,8 23,8 M10 6,8 G , M10 Hex30 8,2 G , M10 Hex30 8,2 1 SAE SAE , M10 Hex30 57,15 27,76 M12 8, , M10 Hex30 57,15 27,76 M12 8,4 G 1 1/ M12 Hex , G 1 1/ M12 Hex , G 1 1/ M12 Hex ,8 1 1/4 SAE /4 SAE M12 Hex ,68 31,75 M14 15, M12 Hex ,68 31,75 M14 15,1 G 1 1/ M12 Hex , G 1 1/ M12 Hex , G 1 1/ M12 Hex ,2 1 1/2 SAE M12 Hex ,38 36,5 M16 17,2 G 1 1/ M12 Hex , G 1 1/ M12 Hex ,1 1 1/2 SAE M12 Hex ,38 36,5 M16 20, Q SAE 6000 S Indicator position plugged Thread G1/2 R Hydraulic Filters & Accessories for Mobile Engine Applications 142
13 FPK 03 & 04 - AP420 Performance Curves SIZE 361 SIZE 362 SIZE 363 SIZE 364 SIZE 365 SIZE 366 BY-PASS SIZE BY-PASS SIZE Hydraulic Filters & Accessories for Mobile Engine Applications
14 FCK - LC Last Chance Technical Data Steel head. Steel bowl. Operating pressure up to 42 MPa (420 bar) Static pressure testing up to 63 MPa (630 bar). Filter Elements Synteq synthetic media ( micron), reinforced with wire mesh Wire mesh 60 micron. Collapse resistance 20 MPa (200 bar) per ISO Fatigue pressure of cycles at 0-30 MPa (0 - bar) per NFPA T Operating temperature C. Compatibility hydraulic fluids per ISO Flow rate and pressure drop per ISO3968 with oil kinematic viscosity 30 cst at 40 C and density 0,875 kg/dm. Ports threaded per ISO 228/1. Donaldson Distributors can request a quote for a seperate head, housing and element up to the specific customer requirements via their Donaldson sales contact. They must identify in a proper manner the necessary components. Hydraulic Filters & Accessories for Mobile Engine Applications 144
15 FCK-LC Last Chance Specifications SIZE RMF* RMF* = Recommanded Maximum Flow in l/min. Performance Curves 145 Hydraulic Filters & Accessories for Mobile Engine Applications
16 FCK-LC Last Chance Hydraulic Filters & Accessories for Mobile Engine Applications 146
FPK 02 AP280. Pressure Line High Pressure Filters In-Line up to 420 bar. Mix&Match to Get What You Need
FPK 02 AP280 Pressure Line High Pressure Filters In-Line up to 420 bar Mix&Match to Get What You Need Donaldson's Mix&Match system provides the great performance and functional advantages of custom-engineered
Return Line Filters. Section Index
Hydraulic Return Line Filters Section Index NEW UNIQUE DESIGN CONCEPT Return & Suction Filters In Tank Combo 120 Series.................... 64 Combo 200 Series.................... 74 ADDITIONS FIK-FIO..............................
FBK-FRCA. Return Line Filters Low Pressure Filters In-Line up to 10 bar. Mix&Match to Get What You Need
Return Line Filters Low Pressure Filters In-Line up to 10 bar Mix&Match to Get What You Need Donaldson's Mix&Match system provides the great performance and functional advantages of custom-engineered filters
SRK-COMBO. Return & Suction Filters Low Pressure Filter In-Tank up to 10 bar. Filter Elements Emergency Suction
Return & Suction Filters Low Pressure Filter In-Tank up to 10 bar Technical Data Filter Elements Main Operating pressure up to 1000 kpa (10 bar). Static pressure testing up to 1500 kpa (15 bar). Back pressure
Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T ) Burst 840 bar (12200 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T 3.10.5.1) Burst 840 bar (12200 psi) (acc. to NFPA T 3.10.5.1) Housing
Filtrec elements are tested according to ISO 2941, ISO 2942 and ISO 23181
Common HYDRAULIC FILTRATION Side wall mounting suction filters Technical Information Connection Ports: 1-1 1/4-1 1/2 BSP (other thread options on request) 1 1/2 SAE J518-3000/M12 Housing Materials: Cover:
D e s c r i p t i o n
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
Pressure: Max working F280 D12x port size 1/2 & 3/4 : 420 bar (6000 psi) Burst F280 D12x port size 1/2 & 3/4 : 1260 bar (18000 psi)
HYDRAULIC FILTRATION F8-D1 series In line medium pressure filters Technical Information Housing Pressure: Max working F8 D1x port size 1/ & 3/4 : 4 bar (6 psi) F8 D1x port size 1 : 3 bar (4 psi) F8 D14x:
HMK05/25 DURAMAX Spin-Ons
100 gpm, 378 lpm /5 DURAMAX Spin-Ons Working Pressures to: Rated Static Burst to: 350 psi 413 kpa 4.1 bar 800 psi 550 kpa 55. bar Flow Range to: 50 gpm 100 gpm 189 lpm 378 lpm Features (single) and (double)
A complete line of pressure differential visual and electrical indicators are available with this series of filters.
D e s c r i p t i o n FHB series filters are designed for pressure line applications where manifold mounting is a specific requirement. The manifold type filters are designed to integrate onto manifold
In line high pressure filters. HF 735 series
In line high pressure filters HF 735 series THE IMPORTANCE OF AN EFFICIENT FILTRATION The main cause of anomalies in hydraulic systems has to be attributed to the presence of contaminants in the fluid.
By-pass: 1,7 bar (24.6 psi) setting N.B. Cartridge with integrated bypass valve and antidrainback membrane
HYDRAULIC FILTRATION Spin-on, tank top return filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFPA T 3.10.17) Burst 20 bar (290 psi) (acc. to NFPA T 3.10.17) Connection Ports:
Pressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T ) Buna-N (FKM on request)
HYDRAULIC FILTRATION Return filters, tank top mounting, inside-to-outside filtration Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.10.5.1) Burst 16 bar (232 psi) (acc. to
Connection Ports: 1/2 1 1/2 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1.5.1): F1-XD4/63/1: 1 bar (15 psi) F1-XD16/25/4: 8 bar (12 psi) Housing Burst (acc. to
FPK02 In-Line Cartridge Filters
HIGH PRESSURE FILTERS FPK2 Max Flow: gpm (9 lpm) FPK2 In-Line Cartridge Filters Working Pressures to: Rated Static Burst to: Flow Range to: 69 psi 42, kpa 42 bar 913 psi 63, kpa 63 bar gpm 9 lpm Features
Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T ) Burst 330 bar (4800 psi) (acc. to NFPA T ) Wire mesh µm
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T 3.10.5.1) Burst 330 bar (4800 psi) (acc. to NFPA T 3.10.5.1) Housing
Pressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION Tank top return filters Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.1..1) Burst 16 bar (232 psi) (acc. to NFPA T 3.1..1) Housing Connection Ports:
THE IMPORTANCE OF AN EFFICIENT FILTRATION
In line high pressure filters HF 745 / HF 748 series THE IMPORTANCE OF AN EFFICIENT FILTRATION The main cause of anomalies in hydraulic systems has to be attributed to the presence of contaminants in the
Pressure: Max working 420 bar (6000 psi) (acc. to NFPA T ) Burst 1260 bar (18300 psi) (acc. to NFPA T )
HYDRULIC FILTRTION In line high pressure filters Technical Information Pressure: Max working 420 bar (6000 psi) (acc. to NFP T 3.10.5.1) Burst 1260 bar (18300 psi) (acc. to NFP T 3.10.5.1) Housing Connection
22PD/32PD Series High Pressure Duplex Filters Max 260 l/min bar
/ Series Max 26 l/min - 21 bar A duplex design with a wide application capability Designed to offer continuous operation during element change The / Series utilizes a duplex design with integrated balancing
Connection Ports: 3/4 1 1/4 BSP (other thread options on request)
HYDRAULIC FILTRATION Medium pressure, in line spin-on filters Technical Information Pressure: Max working (acc. to NFPA T 3.10.17): FA-4-1x: 34,5 bar (500 psi) FA-4-21: 24 bar (348 psi) Burst (acc. to
FPK04 Max Flow: 100 gpm (379 lpm)
HIGH PRESSURE FILTERS In-Line Cartridge Filters Working Pressures to: 4350 psi 30,015 kpa 300 bar Rated Static Burst to: Flow Range To: 9135 psi 63,000 kpa 630 bar 100 gpm 379 lpm Features The T-type ported
Connection Ports: 3/4 1 1/4 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION F4-DMD series In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1..1): F4-DMD/8/11: 7 bar (11 psi) F4-DMD1/3/4: 4 bar (8 psi) Housing Burst
HD 790 HD 990 In-line mounting Operating pressure up to 630 bar / 9137 psi Nominal flow rate up to l/min / gpm
High Pressure Filters Worldline 4 HD 79 HD 99 In-line mounting Operating pressure up to bar / 97 psi Nominal flow rate up to. l/min / 4. gpm Description Application In the high pressure circuits of hydraulic
In line high pressure filters. HF 725 series
In line high pressure filters HF 725 series THE IMPORTANCE OF AN EFFICIENT FILTRATION The main cause of anomalies in hydraulic systems has to be attributed to the presence of contaminants in the fluid.
7000 Series High Pressure Filters
7 Series High Pressure Filters Max 45 l/min - 42 bar FEATURING Global Filtration Technology 7 Series TYPICAL APPLICATIONS Forestry Equipment Industrial Power Units Pulp and Paper Port Handling Equipment
Medium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to psi (379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters Donaldson Duramax
RETURN FILTERS. MATERIALS Head: Aluminium alloy Cover & bowl: Polyammide Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass
COMPONENTS RB MATERIALS Head: Aluminium alloy Cover & bowl: Polyammide Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO 10771-1:2) Max working: 0 kpa
HD 790 HD 990 In-line mounting Operating pressure up to 630 bar Nominal flow rate up to l/min
High Pressure Filters Worldline HD 79 HD 99 In-line mounting Operating pressure up to bar Nominal flow rate up to. l/min Description Application In the high pressure circuits of hydraulic systems. Performance
Pressure: Max working F280 D12x port size 1/2 & 3/4 : 420 bar (6000 psi) Burst F280 D12x port size 1/2 & 3/4 : 1260 bar (18000 psi)
HYDRULIC FILTRTION In line medium pressure filters Technical Information Housing Pressure: Max working F8 D1x port size 1/ & 3/4 : 4 bar (6 psi) F8 D1x port size 1 : 3 bar (4 psi) F8 D14x: 3 bar (4 psi)
Medium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to 2 psi (1379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters MEDIUM PRESSURE
MPS/MST SERIES SPIN - ON FILTER SUCTION - RETURN. Maximum working pressure 12 bar. Flow rates to 300 l/min
MPS/MST SERIES SPIN - ON FILTER SUCTION - RETURN Maximum working pressure 12 bar Flow rates to 3 l/min D e s c r i p t i o n MPS/MST The spin-on filter series is a complete product range suitable, for
HPK04 Max Flow: 120 gpm (454 lpm)
HIGH PRESSURE FILTERS In-Line Cartridge Filters Working Pressures to: 6000 psi 41,380 kpa 413.8 bar Rated Static Burst to: Flow Range To: 17000 psi 117,300 kpa 1173 bar 120 gpm 454 lpm Features The high
(Ecological Pressure Filter)
EPF iprotect (Ecological Pressure Filter) High Pressure Filters Max 7 I/min - 45 bar A compact, cost effective pressure filter solution Designed with the iprotect patented filtration technology The Parker
OUT. The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
PRESSURE FILTERS. BYPASS VALVE Setting: 170 kpa (1,7 bar) ± 10% WORKING TEMPERATURE From -25 to +110 C
COMPONENTS MATERIALS Head: Aluminium alloy Spinon cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile (FKM on request fluoroelastomer) Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO
Flow rates to 500 l/min
FF 5 Filter housing in according to SE J066 for F filter elements Maximum pressure 50 bar Flow rates to 500 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing:
MEDIUM PRESSURE FILTERS MFX Series Inline Filters 725 psi up to 35 gpm Hydraulic Symbol
MFX Series Inline Filters 725 psi up to 35 gpm Hydraulic Symbol A B Features Eco-friendly, cost-effective alternative to spin-on filters Integrated retrofit protection Longer service life of the filter
FMM bar. Working pressure. Style T. Style D. Style S. Style B D.I. D.I. D.I. D.I.
30 FMM 050 SRIS FMM 050 Working pressure 0 bar Style S Style Style T Style D 3 3 Technical data Filter body (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel (chemical heat treatment)
Low Pressure Medium Pressure High Pressure Accessories Off-line Filtration
Front Donaldson Cover DeliversHeadline Should HYDRAULIC Be Centered SERVICE PARTS & In ACCESSORIES This Color Box GUIDE Low Pressure Medium Pressure High Pressure Accessories Off-line Filtration Donaldson
RETURN FILTERS. MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass
COMPONENTS RC MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO 10771-1:2002) Max working:
High Pressure Filters. 15P/30P Series. MAX 200 I/min bar. High pressure filters
P/3P Series MAX 2 I/min - 27 bar 9 High pressure filters P/3P Series Features & Benefits Features Compact aluminium housing Two head sizes and two bowl lengths Large ports and wide flow paths Microglass
FMP IN-LINE FILTER SERIES. Maximum working pressure 250 bar. Flow rate to 500 l/min
INLIN FILTR Maximum working pressure 0 bar Flow rate to 00 l/min R.F. Filter Symbol without bypass Filter Symbol with Reverse Flow R.F. Filter Symbol with bypass Filter Symbol with bypass & Reverse Flow
FPG-MDS PRESSURE FILTERS MATERIALS PRESSURE BYPASS VALVE WORKING TEMPERATURE COMPATIBILITY (ISO 2943) HYDRAULIC DIAGRAM.
MATERIALS Head: Aluminium alloy Bowl: Steel Bypass valve: Steel Seals: NBR Nitrile (FKM - on request fluoroelastomer) Indicator housing: Brass PRESSURE Max working: 5 MPa ( bar) Collapse, differential
Pressure: Max working 160 bar (2300 psi) (acc. to NFPA T ) Burst 480 bar (6900 psi) (acc. to NFPA T )
HYDRULIC FILTRTION F16-XD series In line medium pressure filters Technical Information Pressure: Max working 16 bar (3 psi) (acc. to NFP T 3.1..1) Burst 48 bar (69 psi) (acc. to NFP T 3.1..1) Housing Connection
A complete line of pressure differential visual and electrical indicators are available with this series of filters.
D e s c r i p t i o n FHP series filters are designed for high pressure line applications and are suitable for in-line installation. Continued research and development on both the filter bodies and the
FHF325 series. Filter housing according to SAE J2066 for HF4 filter elements. High Pressure fi lters
High Pressure fi lters FHF5 series Maximum pressure up to 50 bar Flow rate up to 500 l/min housing according to SAE J066 for HF filter s 95 High Pressure fi lters FILTER SIZING The correct filter sizing
HIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Mounting Series DF...P Pressures to 45 psi Flows to 18 gpm HYDAC DF...P High Pressure Filters are designed to be mounted directly onto the manifold
High Pressure Filters Worldline 400 HD 790 HD 990. In-line mounting Operating pressure up to 9137 psi Nominal flow rate up to gpm. 40.
High Pressure Filters Worldline 4 HD 79 HD 99 In-line mounting Operating pressure up to 97 psi Nominal flow rate up to 64. gpm 4.9-us Description Application In the high pressure circuits of hydraulic
Filtrec elements are tested also according to ISO 2942, ISO and ISO 3968
HYDULIC FILTTION F-1 series Spin-on filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFP T 3.10.17) Burst 20 bar (290 psi) (acc. to NFP T 3.10.17) Connection Ports: 3/4 1 1/2
LDP & LDD series Filter element according to DIN Maximum working pressure up to 6 MPa (60 bar) - Flow rate up to 330 l/min
Low & Medium Pressure filters LDP & series Maximum working pressure up to 6 MPa (60 bar) Flow rate up to 0 l/min 7 Low & Medium Pressure filters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE
In line high pressure filters. HF HF 761 series
In line high pressure filters HF 76 - HF 761 series THE IMPORTANCE OF AN EFFICIENT FILTRATION The main cause of anomalies in hydraulic systems has to be attributed to the presence of contaminants in the
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Features MF Filters are manufactured with an aluminum head. MF, MFD, MFDS Series Spin-On Filters Choice of NPT, SAE straight thread O-ring boss, BSPP, and SAE 4-bolt flange porting to allow easy installation
Working pressure. 350 bar. Style B Series FHD 051. Series FHD 325/332 D.I. D.I. D.I. A A
98 FD SRIS FD Working pressure 350 bar Style S Style Series FD 05 Style Series FD 35/33 D.I. D.I. D.I. 99 Technical data body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical
DT-350 In-Line Hydraulic Filter
DT-35 In-Line Hydraulic Filter Features The DT-35 T-type ported series offers flows to 5 gpm with 3 bypass options and conforms to the HF3 automotive standard. Our standard bowl drain plug helps relieve
D e s c r i p t i o n
e s c r i p t i o n MPH and MPI series filters are designed for returnline applications and provide various installation applications. The filters are installed semiimmersed (MPH) or totally immersed into
Filtering elements differential collapsing pressure tested in compliance with ISO 2941:
DESCRIPTION Many years of in-field experience have shown the necessity of more and more efficient controls on the contamination level of hydraulic fluids and fuels. With this goal uppermost in its mind,
Fluid Cooling Industrial COLW Series
Fluid Cooling Industrial COLW Series 0916 COPPER & STEEL CONSTRUCTION Performance Notes Ideal for independent cooling and filtering of system oils Utilizes a high efficient EK series shell & tube (finned
Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX
Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX up to 2000 l/min, up to 420 bar DF/DFF...1.X/2.X 30 60 110 140 160 240 280 330 500 660 990 1320 1500 2000 3000 4000 DF...3.X DFFX...1.X/2.X
FILTERS. PUMP CARE - Suction filters TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS. PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW
FILTERS HYDRAULIC DIVISION - Suction filters SD TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW SPARE PARTS ORDERING INFORMATION DINSIONS OF
Duplex Pressure Filters
Duplex Pressure Filters Series DFDK Ball Valve Selector Pressures to 45 psi Flows to 9 gpm APPLICATIONS HYDAC DFDK Duplex Filters are ideal for use on hydraulic test equipment, robots, or other critical
SPIN-ON FILTERS & ELEMENTS
ABSOLUTE RATED (BETA SPIN ) & NOMINAL RATED SPIN-ON FILTERS & ELEMENTS Single and Twin Element Models Pressures to 20 psi Flows to 120 gpm APPLICATION HYDAC Spin-On Filters are for filtration of hydraulic
Low Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS
Low Pressure Filters Low pressure filters are the most common type of filter found in hydraulic circuits used most often in return line applications. Low Pressure Filters Donaldson low pressure filters
MPF filters within this range are suitable for flow rates up to 750 l/min.
D e s c r i p t i o n MPF series filters are designed for return lines, and are installed semi-immersed in a reservoir. Continued Research & Development on both the filter bodies and the filter elements
Return fi lters. FRI series. Maximum pressure up to 20 bar - Flow rate up to 1500 l/min. Return fi lters
Return fi lters series Maximum pressure up to bar - Flow rate up to 15 l/min 193 Return fi lters GENERAL INFORMATION Technical data Return filter Maximum pressure up to bar - Flow rate up to 15 l/min Filter
Change-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 2500 l/min, up to 315 bar 30 60 110 140 160 240 280 330 500 660 1.x 660 2.x 990 2.x 1320 2.x 1320 3.x 2640 3.x 3960 3.x 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
LMP series
Low & Medium Pressure fi lters LMP 95-95-95 series Maximum working pressure up to.5 MPa (5 bar) - Flow rate up to 000 l/min 7 Low & Medium Pressure filters Introduction FILTER SIZG DEX CALCULATION CORRECTIVE
High Pressure Filters HD 044 HD 064. Flangeable Operating pressure up to 500 bar Nominal flow rate up to 105 l/min e
High Pressure Filters HD HD Flangeable Operating pressure up to bar Nominal flow rate up to l/min.3-e Description Application In the high pressure circuits of hydraulic systems. Performance features Protection
SPIN-ON FILTER - LOW PRESSURE LINE
SERIES MSH SPIN-ON FILTER - LOW PRESSURE LINE Maximum working pressure 5 psi Flow rate to 8 GPM D e s c r i p t i o n MSH working pressure of 5 psi, with a peak pressure This filter MSH series utilises
Low Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
High Pressure fi lters. FHP series. Maximum pressure up to 420 bar - Flow rate up to 750 l/min. High Pressure fi lters
igh Pressure fi lters FP series Maximum pressure up to bar Flow rate up to 7 l/min igh Pressure fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop depending
AGS/MPN Series. Medium Pressure Filters. Global Filtration Technology
Medium Pressure Filters Global Filtration Technology 63 Features/Applications for Medium Pressure Inline Filters AGS Series Rated Working Pressure 1000 PSI Rated Static Pressure 1500 PSI Flows to 25 GPM
HIGH PRESSURE FILTERS
HIGH PRESSURE FILTERS Series DF & LF Pressures to 6 PSI Flows to 18 GPM APPLICATION HYDAC DF & LF In-line High Pressure Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
Taking Hydraulic System Reliability To A Higher Level
Taking Hydraulic System Reliability To A Higher Level Hydraulic Filtration Product Line PureForce Product Line Provides Superior Protection With increased demands on today s hydraulic systems, maintaining
Bulk Liquid Filtration
Low Pressure, High Flow Filters Duramax Spin-On Filters Manifolds Breathers, Water Seperators Gauges, Valves, Test Points, more www.donaldson.com Brochure No. IH00501 Rev 4/05 Why install filtration on
HIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm
HIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm Hydraulic Symbol DFF FILTER REVERSE FLOW CIRCUIT Bypass Valve Filter Element Pop-up Indicator Features Available in T ported
Return Line Filter RF
HYDAC return line filters type RF are designed to be mounted directly on tank tops. Inline mounting is also possible. Return Line Filter RF Flow rates up to 5, l/min Pressure range up to 25 bar Material:
15/40/80CN Series Medium Pressure Filters Max. 600 I/min - 70 bar
1/4/8CN Series Max. 6 I/min - 7 bar Premium performance for medium pressure applications FEATURING An economical multipurpose filter solution The CN Series utilizes a cast aluminium head and spin-on bowl
SERIES SF2-250 SUCTION FILTER. Flow rate to 45 gpm
SERIES SF2-250 SUCTION FILTER Flow rate to 45 gpm D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows
HIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Mounting Series DF...P Pressures to 4 psi Flows to 18 gpm HYDAC DF...P High Pressure Filters are designed to be mounted directly onto the manifold block
SERIES SF2-500 SUCTION FILTER. Flow rates to 225 gpm
SERIES SF2-5 SUTION FILTER Flow rates to 225 gpm D e s c r i p t i o n 5 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 225 gpm and filtration from
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with an aluminum head. Choice
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with
HIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Side Mounting Series DF...QE Pressures to 4 psi Flows to 18 gpm HYDAC DF...QE High Pressure Filters are designed to be side mounted directly onto the
WITH P INDICATOR OPTION INDICATOR POSITION # INDICATOR POSITION # P3000G04=4.0" P3000G08=7.8"
D6 P3 SERIES WITH P OPTIO Flows Up To: Port Sizes: Max. Operating Pressure: Application: 3 GPM (114 L/MI) 1 1/16-12 U (SAE-12) 3, PSI (27 BAR) Inline Filtration, External Charge Pump Filtration, High Shock
LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 360 psi up to 400 gpm
LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 36 psi up to 4 gpm Hydraulic Symbol A D2 Features RF 3 filters are constructed of polyamide plastic. RF 6-33 filters are constructed of aluminum
DIN Filter element according to DIN Low & Medium Pressure filters. Maximum pressure up to 60 bar - Flow rate up to 330 l/min
Low & Medium Pressure filters & series Maximum pressure up to 60 bar Flow rate up to 0 l/min DIN 550 09 Low & Medium Pressure filters FILTER SIZING The correct filter sizing have to be based on the variable
FHA 051 Working pressure 6000 psi
6 SRIS Working pressure 6000 psi Style S Style Style T Style D Style V Style Z D.I. 7 8 Technical data Filter body (Materials) Head: Steel (chemical heat treatment) Housing: Steel (chemical heat treatment)
Return Line Filter HF4R up to 450 l/min, up to 10 bar
Return Line Filter HF4R up to 450 l/min, up to 10 bar 9" 18" 27" 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international regulations.
Inline Filters NF. Flow rates up to 3,500 l/min Pressure range 25 bar Material: Aluminium / Aluminium-Cast Iron
NF filters are designed for inline mounting and as tank-top mounted return line filters. These filters can also be used on filling, flushing and off-line units. Inline Filters NF Flow rates up to 3,500
Maxiflow Series Spin-on Filters Max. 360 I/min - 10 bar
Maxiflow Series Spin-on Filters Max. 36 I/min - 1 bar Designed for both suction and return application Spin-on filters The Maxiflow Series full flow filters for suction or return are designed to provide
HIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm
HIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm Hydraulic Symbol or DFFX FILTER REVERSE FLOW CIRCUIT P Indicator Reverse Flow Valve BY-PASS
LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 224 gpm
LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 4 gpm Technical Specifications Mounting Method 75/9/15/165/185 mounting holes - filter housing D5 Features The compact and lightweight
12CS Series. Coreless Spin-on Filter Max. 75 l/min - 35 bar. Environmentally friendly alternative for spin-in filtration.
12CS Series Coreless Spin-on Filter Max. 7 l/min - 3 bar Environmentally friendly alternative for spin-in filtration Lightweight, non-metallic element that can be incinerated The 12CS Series features a
Inline Filter MFM. Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS / steel E /01.04
Inline Filter MFM Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS 400-15 / steel 1. TECHNICAL SPECIFICATIONS 1.1. FILTER HOUSING Construction The inline filter consists of a filter
Pressure Filter DF...K P, DF...M P, Flange Mounted
Pressure Filter, DF...M P, Flange Mounted up to 550 l/min, up to 260 bar DF...M P 330...1.X 160 240 280 500...1.X 660...1.X 660...2.X 990...2.X 1320...2.X 660...3.X 990...3.X 1320...3.X 1. TECHNICAL SPECIFICATIONS
Pneumatic Valve 4V100 Series
tic Valves Pneumatic Valve 4V100 4V100 Low power consumption exhaust for the pilot and main valve, small size, large flow, good appearance, flexible, can be integrated installation, high wear resistant
Pressure Filters DF...M A / DF...Q E DF...MHA / DF...MHE Flow rates up to 500 l/min Pressure range up to 315 bar Material: SG Iron/ADI, Steel
Manifold Mounted, Rear Flanged Pressure Filters DF...M A / DF...Q E DF...MHA / DF...MHE Flow rates up to 5 l/min Pressure range up to 35 bar Material: SG Iron/ADI, Steel . DESCRIPTION.. FILTER HOUSING
Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
MEDIUM PRESSURE FILTERS
Medium Pressure Filters 61-2999 psi Low-cost aluminum construction inline filters, provide flexibility for use in both mobile and industrial applications. Durable and light weight, these filters are ideal