Working pressure. 350 bar. Style B Series FHD 051. Series FHD 325/332 D.I. D.I. D.I. A A

Transcription

1 98 FD

2 SRIS FD Working pressure 350 bar Style S Style Series FD 05 Style Series FD 35/33 D.I. D.I. D.I. 99

3 Technical data body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) ypass valve: Steel Pressure Maximum operating pressure: 350 bar (35 MPa) Test pressure: 55 bar (5.5 MPa) urst pressure: 50 bar (5 MPa) Pulsed pressure fatigue test,000,000 cycles with pressure from 0 to 350 bar (35 MPa) Temperature From -5 C to + C ypass valve Opening pressure 6 bar ±% Other opening pressures on request. lement rea element in stainless steel mesh Length Type P00 P050 P30 3, Values expressed in cm Pressure drops Δp ousing The curves are plotted using mineral oil with density of 0.86 kg/dm 3 to ISO Δp varies proportional with density. ousing FD 00 lements type Δp lements in microfibre series R: 0 bar,00 lements in microfibre series S-: bar lements in stainless steel mesh series N: 0 bar Oil flow from exterior to interior. Δp bar,00 Seals Standard Nitrile (NR) series Optional FPM series V Weights without filter elements (kg) Length FD FD ,00 3, ousing FD 050 FD FD internal volumes (dm 3 ) Length FD FD Δp bar,00,00 FD FD Connections In-line Inlet/Outlet 90 Compatibility odies compatible with: Mineral oils to ISO aqueous emulsions synthetic fluids, water/glycol. elements compatible with: Mineral oils to ISO aqueous emulsions synthetic fluids, water/glycol. Nitrile (NR) seals series, compatible with: Mineral oils to ISO aqueous emulsions synthetic fluids, water/glycol. Δp bar 0,00 3,00,00, ousing FD 35 V series FPM seals, compatible with: Synthetic fluids type S-FDR-FDS-FDU To ISO 943 0,

4 ousing FD 33 3,00,00 Δp bar,00 0, Valves ypass valve pressure drop FD Δp bar FD Δp bar

5 FD Recommended maximum flow rate - Pressure drop of complete filter equal to Δp.5 bar. - Oil kinematic viscosity 30 mm /s (cst). - Density 0.86 kg/dm element type Series Series R Series S Series R Series S Series R Series S Length M5* M5* M M M M * SRIS N

6 Dimensions FD Ø 5 Ch. 7 Oil drain plug G /8-0 Vent Indicator connection Plug T Ch ,4 6 9 ir breather Threaded Connections Depth 7 mm Length mm G / / NPT M6 /4 UNC S 8 (3/4-6 UNF) /4 UNC 3

7 FD 05 * 5 * alancing valve View x Ø 68 Ch. 30 Oil drain plug G /4 - Ch. 6 0 View x Indicator connection Plug T Ch. 30 Vent 56 4,5 4 ir breather 9 alancing valve Ch LNCG 30 98,5 Threaded Connections Depth 7 mm * * Length mm G / M6 With by-pass 8,5 5,5 53 G 3/4 M6 Non by-pass / NPT /4 UNC /4 NPT /4 UNC S 8 (3/4-6 UNF) /4 UNC S ( /6 - UN) /4 UNC 4

8 FD , ,5 85,5 96 alancing valve Ø Ch Oil drain plug G 3/8 - Ch. 8 Indicator connection Plug T - Ch. 30 oles for eyebolt mounting 8 36 Vent M 65 97,5 Ch. Vent 9,5 Threaded Connections D Depth mm Length mm G /4 /4 NPT S 0 ( 5/8 - UN) M 3/8 UNC 3/8 UNC M 3/8 UNC 3/8 UNC

9 FD alancing valve Ø 50 Ch. 30 Oil drain plug G 3/8 - Ch. 8 Only for FD 33 length ,75 oles for eyebolt mounting Indicator connection Plug T - Ch. 30 M 6 / S 6000 PSI Vent 68 Ø 8 Ch. 3 Ch. 3 P0 50 mm ir breather Ch. P0 550 mm Oil drain plug G 3/8 - Ch. 8 Ch Style P0 standard maintenance from head. Style P0 maintenance option from housing base. Flanged connection D Depth mm Length mm / S 6000 PSI/M / S 6000 PSI/UNC M6 5/8 UNC M 3/8 UNC

10 Spare parts FD 4 3h 3d 3e 3a 3b 3g 3c 3f 3g Pos. Description Qty. FD Series FILTR Complete filter See order table element See order table 3 Seal kits NR FPM NR FPM NR FPM NR FPM a 3b element O-Ring O-Ring for housing OR OR 3093 OR 44 Ø 5,88 x,6 Ø 3,67 x,6 Ø 39,69 x 3,53 OR 36 OR 35 4 pz. OR 3350 Ø 40,95 x,6 Ø 56,8 x,6 Ø 88,57 x,6 3c nti-extrusion ring Parbak 30 Parbak 39 4 pz. Parbak 53 Ø 4,73 x,8 Ø 56,03 x,8 Ø 89,36 x,8 3d Gasket (NR) (FPM) (NR) (FPM) (NR) (FPM) (NR) (FPM) 3e O-Ring OR 050 Ø,4 x,78 3f Protective seal g Oil drain plug G /8 with bonded seal G /4 with bonded seal G 3/8 with bonded seal 3h ir vent Indicator plug T TV T TV T TV T TV - Indicators See order table 8

11 Spare parts FD 5c 5b 5a 5g 5f 5e 5d 5h 5m Pos. Description Qty. FD Series FILTR Seal kits NR FPM NR FPM NR FPM NR FPM a O-Ring for spacer OR 08 OR 3 OR 55 OR 00 Ø 0,35 x,78 Ø 33,05 x,78 Ø 39,45 x,78 Ø 50,5 x,78 5b O-Ring for spacer OR 093 OR 50 OR 36 OR 300 Ø 3,5 x,78 Ø 37,8 x,78 Ø 40,95 x,6 Ø 50,47 x,6 5c nti-extrusion ring for spacer Parbak 0 Parbak 09 Parbak 30 Parbak 36 Ø 4,6 x,4 Ø 38,56 x,4 Ø 4,73 x,8 Ø 5,6 x,8 5d O-Ring for balancing valve - OR 03 OR 037 Ø 7,65 X,78 Ø 9,5 X,78 5e nti-extrusion ring balancing valve f onded seal for balancing valve - - onded Seal Ø 5,83 - FPM 5g Seal kit for spacer (DN) (DN0) (DN5) (DN3) 5h 5m O-Ring p nti-extrusion ring p - - OR 093 Ø 3,5 x,78 Parbak 0 Ø 4,6 x,

12 Ordering information FD assembly a FD00/05 xample: FD S G S P0 element P xample: P S P0 8b - Size element 5 - Connections FD 00 FD length FD 00 FD 05 0 X - X - - X 3 - X 4 - X 5 - X 3 - ypass valve G G / G 3/4 G - 3/4 NPT G3 / NPT G / G4 S 8 / NPT G5 - S 8 G6 - S F - - F element 03 Inorganic microfibre 3 µ 06 Inorganic microfibre 6 µ Inorganic microfibre µ ßx (c) 00 see page 6 Inorganic microfibre 6 µ S Without bypass 5 Inorganic microfibre 5 µ With bypass (only for FD 05) M5 Stainless steel mesh 5 µ (style N only) 4 - Seals 7 - elements differential pressure V NR FPM R 0 bar only FD 05 N S bar only FD 05 0 bar (only for element M5) bar only FD Options a) b) element P0 MP Filtri standard P0 MP Filtri standard P0 Pxx MP with replacement of the filter element from the cap (only for length 4) Customer request Pxx Customer request DIFFRNTIL DICTORS (see page 5) MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved The data in this publication is marketing information. MP Filtri reserves the right to make changes to the product described herein at any time it deems fit in relation to technical or commercial requirements. The colors of the products shown on the cover are for illustration purposes only. Copyright. ll rights reserved.

13 Ordering information FD assembly a FD 35/33 xample: FD S G S P0 element P xample: P30 4 S P0 - Size 5 - Connections 8b length FD 35 FD 33 X - X X 3 X X 4 - X 3 - ypass valve 6 - element FD 35 FD 33 G G /4 - G - - G3 /4 NPT - G4 S 0 - G5 - - G6 - - F - / S 6000 PSI/M F - / S 6000 PSI/UNC 03 Inorganic microfibre 3 µ S Without bypass 06 Inorganic microfibre 6 µ 4 - Seals With bypass NR V FPM Inorganic microfibre µ ßx (c) 00 see page 6 Inorganic microfibre 6 µ 5 Inorganic microfibre 5 µ M5 Stainless steel mesh 5 µ (style N only) 7 - elements differential pressure R 0 bar N S bar 0 bar (only for element M5) 8 - Options a) b) element P0 MP Filtri standard P0 MP Filtri standard P0 Pxx MP with replacement of the filter element from the cap (only for length 4) Customer request Pxx Customer request DIFFRNTIL DICTORS (see page 5) MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved The data in this publication is marketing information. MP Filtri reserves the right to make changes to the product described herein at any time it deems fit in relation to technical or commercial requirements. The colors of the products shown on the cover are for illustration purposes only. Copyright. ll rights reserved.