Product Range ijoint Compression Fittings

Transcription

1 Prouct Range 2011 ijoint Compression Fittings

2 Benefits ijoint, the new generation of polypropylene compression fittings, combines the best in jointing technology for both push-fit an compression. ijoint is the result of GF Piping Systems unrelenting commitment to continuous improvement an a culture base on innovation an ingenuity. The innovative esign provies essential benefits like fast, forgiving an effort-free installation methos in challenging trench an weather situations, ensuring maximum lifetime for top performance in water applications. The ijoint range contains straight an reucing joiners, tees, elbows, threae connectors an en caps, ranging from 20 to 110 mm. Fast an easy installation The clamp ring mae of polyacetal oes not come into contact with the pipe uring insertion or removal of the pipe an there is no nee in any situation to isassemble the ijoint fitting before installation. This combine with a efine stop position for the nut an that the nut can be fixe with less than one turn makes installation extremely easy. No special tools or equipment are necessary for installation. High resistance an no corrosion The special coate NBR gasket which is approve for potable water in combination with the unique boy esign ensure high performance in terms of pressure an pull-out resistance, vacuum as well as suction. The boy mae of polypropylene is completely corrosion-free an guarantees top performance as well as high resistance to stress in long lifetimes. The fittings are suitable for applications uner an above groun thanks to very high resistance to UV rays. Safe esign The special esign allows perfect resistance to water hammer an pull-out forces without having a negative impact on the connection lifetime. The en-stop for the nut works as a very helpful inicator of a proper nut closing position an the nut oes not loosen by itself ue to an anti-rotation stop. The clamp ring an all other components are containe in the boy so that they cannot be lost even when isassembling the fitting or uring transportation. High traceability is thus ensure. 2

3 Applications The comprehensive ijoint system is ieal for new installations as well as renovations or extensions of existing water lines. ijoint is esigne for use in house connections an service lines. This wie-ranging system lens itself to new installations as well as to renovation or extension work on existing water lines. ijoint can be use for iverse applications an its esign benefits a vast number of inustries. In aition, ijoint is the perfect solution for bypass systems, where temporarily lai lines nee to be isassemble in a quick an easy way, leaving the coupler intact by simply unscrewing an sliing the joint back from the pipe. 3 1 Water Distribution ines House Connections an Service ines Pressure Sewage 4 2 Inustrial Applications Mining Inustry eisure Parks Golf Courses Camping Grouns 4 Farming Greenhouses High-en Irrigation Distribution line House connection High-en irrigation 3

4 Features The ijoint focuses on safety an ergonomic hanling real benefits for our customers. The new line of compression fittings from GF Piping Systems has been evelope for use in water systems, assuring you of a quicker an easier installation compare to a traitional compression fitting. The coate sealing system makes this prouct both unique an long-lasting. Superb quality an innovative features preestine ijoint for the rinking water market worlwie. ijoint comprises all the benefits of plastics: no rust an no incrustation, lightweight construction, no leakage, excellent pressure resistance just to name a few. To sum it up: ijoint provies an excellent cost-benefit ratio with a life cycle of at least 50 years. Nut Tightene with one turn Gasket Coate sealing system for more safety Clamp ring No interference uring pipe insertion an removal Stop ring Defines sealing-locking position for the nut Nut locking Two protrusions prevent acciental unscrewing of the nut over time Transport fixation Avois acciental isassembling of the fitting before installation 4

5 Technical specifications Conformity to all important stanars an availability in a wie range of iameters makes ijoint your first choice. ijoint compression fittings are suitable with all types of polyethylene pipes PE 80, PE 100 an PEX-a. The fitting is reay to be installe out of the box without any preparation. The pipe can be inserte irectly without loosening the nut or isassembling the fitting. There is a 16 bar resistance throughout the complete range of ijoint fittings, with approvals accoring to the most stringent regulations worlwie. Thanks to the complete prouct selection of valves, fittings, pipes an measurement an control systems, GF Piping Systems is your one-stop solution provier, incluing worlwie training an supply chain management. Pressure range MOP of 16 bar for the complete range of ijoint fittings from 20 to 110 mm (complete range DVGW approve PN16) Temperature range -10 C to +45 C Materials Boy (an thrust ring from 75 to 110 mm) UV stabilize polypropylene (PP) Nut UV stabilize blue polypropylene (PP) Clamp ring Polyacetal (POM) Gasket Foo-safe coate NBR rubber suitable for potable water. Reinforcement ring (for female threa) Stainless steel AISI 430 Regulation for rinking water ijoint compression fittings comply with the strictest regulations in existence worlwie, e.g.: W270 an KTW (Germany) ATA (Netherlans) DM /04/2004 (Italy) Global Mark (Australia) ACS (France) Approvals* Stanars DVGW (Germany) IIP (Italy) SVGW (Switzerlan) KIWA (Netherlans) ACS (France) Global Mark (Australia) For PE pipes: DIN EN 12201; ISO ; DIN 8074; EN /2; AS/NZS 4130; BS 6572; BS 6730; ISO 4427; UNI 7990; ISO Threas DIN EN (ISO 7-1); BS 21; AS Flanges DIN EN1092-1; DIN Test stanars ISO 14236; DIN ; AS/NZS 4129; BR K534/03 UNI; ISO 3501; ISO 3503; ISO 3458; ISO 3459; VP609 * see etails at 5

6 ijoint Installation Manual Save your time, o not open ijoint! Instructions Ø 20-63mm Before proceeing with the assembly, check the presence of all components (clamp ring, gasket) Cut the pipe square an eburr it. Mark the insert epth on the pipe Push the pipe into the fitting through the clamp ring until Push the pipe through the gasket until you reach the pipe stop of the Tighten the nut until the stop ring using the Georg Fischer tool or a (see table: insert epth). the first stop, meaning you have fitting (lubrication an chamfering wrench for fittings. reache the gasket. of the pipe en will facilitate insertion). Check the mark of the insert epth on the pipe for correct assembly. Ø mm Before proceeing with the assembly, check the presence of all components (clamp ring, thrust ring, gasket) Cut the pipe square an eburr it without chamfering. Push the pipe into the fitting until you have reache the pipe stop. Tighten the nut until the stop ring using the Georg Fischer tool or a wrench for fittings. Insert Depth Fittings Flange Fittings Ø mm Ø mm

7 ijoint COMPRESSION FITTINGS Male aaptor installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water male threa: ISO 7 (conical) R [inch] PN Coe SP GP kg D Female aaptor with stainless steel reinforcement ring (AISI430) installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water female threa: ISO 7 (parallel) Rp [inch] PN Coe SP GP kg D table continue next page

8 Rp [inch] PN Coe SP GP kg D Coupling installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water PN Coe SP GP kg D Reucing coupling installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water - PN Coe SP GP kg table continue next page

9 - 1 D D1 l Repairing coupling (without pipe stop) installation without isassembling suitable for PE an PEX-a pipes gasket: NBR quality for rinkable water PN Coe SP GP kg D Tee installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water PN Coe SP GP kg D H

10 90 Reucing Tee installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water -- PN Coe SP GP kg D D1 2 l4 H Tee with threae male off take installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water male threa: ISO 7 (conical) R [inch] PN Coe SP GP kg D H table continue next page

11 R [inch] PN Coe SP GP kg D H Tee with threae female off take with stainless steel reinforcement ring (AISI430) installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water female threa: ISO 7 (parallel) Rp [inch] PN Coe SP GP kg D H

12 90 Elbow installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water PN Coe SP GP kg D Elbow with threae male off take installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water male threa: ISO 7 (conical) R [inch] PN Coe SP GP kg D H

13 90 Elbow with threae female off take with stainless steel reinforcement ring (AISI430) installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water female threa: ISO 7 (parallel) Rp [inch] PN Coe SP GP kg D H Elbow installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water PN Coe SP GP kg D

14 45 Elbow with threae male off take installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water male threa: ISO 7 (conical) R [inch] PN Coe SP GP kg D H Flange joint with metal flange installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water flange: steel DN [inch] DN PN Coe SP GP kg D En cap installation without isassembling suitable for PE an PEX-a pipes gasket: NBR (PTFE coate) quality for rinkable water PN Coe SP GP kg D

15 Metal tightening wrench for ijoint fittings - Coe SP GP kg PF

16 Notes:

17 Notes:

18 Notes:

19 General Conitions of Supply 1. General 1.1 These general conitions shall apply to all goos supplie by Georg Fischer TPA srl to the Purchaser. They shall also apply to all future business even when no express reference is mae to them. 1.2 Any eviating or supplementary conitions, especially Purchaser s general conitions of purchase, an verbal agreements shall only be applicable if accepte in writing by Georg Fischer TPA srl. 2. Teners Teners shall only be bining if they contain a specifically state perio for accep tance. 3. Scope of Delivery 3.1 Georg Fischer TPA srl s prouct range is subject to change. 3.2 The confirmation of orer shall govern the scope an execution of the contract. 4. Data an Documents 4.1 Technical ocuments such as rawings, escriptions, illustrations an ata on imen sions, performance an weight as well as the reference to stanars are for information purposes only. They are not warrante characteristics an are subject to change. 4.2 All technical ocuments shall remain the exclusive property of Georg Fischer TPA srl an may only be use for the agree purposes or as Georg Fischer TPA srl may consent. 4.3 In the context of the contractual relation with the Purchaser personal ata may be processe. The Purchaser agrees to the isclosure of sai ata to thir parties, such as foreign subcontractors an suppliers etc. 5. ocal aws an Regulations The Purchaser shall bring to the attention of Georg Fischer TPA srl all local laws an regulations at the place of estination which bear connection with the execution of the contract an the aherence to relevant safety regulations an approval proceures. 6. Prices 6.1 Unless agree otherwise, the prices shall be eeme quote net, ex works, incluing stanar packing. All supplementary costs, such as the cost of carriage, insurance, export an import licences, etc. shall be borne by the Purchaser. The Purchaser shall also bear the costs of all taxes, fees, uties, etc. connecte with the contract. 6.2 If the costs of packing, carriage, insurance, fees an other supplementary costs are in clue in the tener price or contract price or are referre to specifically in the tener or confirmation of orer, Georg Fischer TPA srl reserve the right to revise their prices accoringly shoul any change occur in the relevant tariffs. 7. Payment 7.1 The Purchaser shall make payment in the manner agree by the parties to the George Fischer works conucting the account without any euctions such as iscounts, costs, taxes or ues. 7.2 The Purchaser may only withhol or off-set payments ue against counterclaims which are either expressly acknowlege by Georg Fischer TPA srl or finally aware to the Purchaser. In particular, payment shall still be mae when unessential items are still outstaning provie, however, that the goos alreay elivere are not renere unusable as a result. 8. Retention of Title 8.1 The goos shall remain the property of Georg Fischer TPA srl until the Purchaser shall have settle all claims, present an future, which Georg Fischer TPA srl may have against him. 8.2 Shoul the Purchaser sell goos to which title is reserve he shall then be eeme to have tacitly assigne to Georg Fischer TPA srl the procees eriving from their sale together with all collateral rights, securities an reservations of title until all claims hel by Georg Fischer TPA srl shall have been settle. 8.3 To the extent the value of the goos to which title is reserve together with collateral securities shoul excee Georg Fischer TPA srl s claims against the Purchaser by more than 20%, Georg Fischer TPA srl shall reassign the above procees to Purchaser at his request. 8.4 In case of efault on the part of the Purchaser, in particular in case of arrears, George Fischer shall be entitle to repossession of the goos after having given notice to thiseffect, an the Purchaser shall be obligate to surrener the goos. 9. Delivery 9.1 The term of elivery shall commence as soon as the contract has been entere into, all official formalities such as import an payment permits have been obtaine an all essential technical points have been settle. The term of elivery shall be eeme uly observe when, upon its expiry, the goos are reay for espatch. 9.2 Delivery is subject to the following conitions, i. e. the term of elivery shall be reasonably extene: a) if Georg Fischer TPA srl are not supplie in time with the information necessary for the execution of the contract or if subsequent changes causing elays are mae by the Purchaser. b) if Georg Fischer TPA srl are prevente from performing the contract by force majeure. Force majeure shall equally be eeme to be any unforseeable event beyon Georg Fischer TPA srl s control which reners Georg Fischer TPA srl s performance commercially unpractible or impossible, such as elaye or efective supplies from subcontractors, labour isputes, governmental orers or regulations, shortages in materials or energy, serious isturbances in Georg Fischer TPA srl s works, such as the total or partial estruction of plant an equipment or the breakown of essential facili-ties, serious isruptions in transport facilities, e.g. impassable roas. Shoul the effect of force majeure excee a perio of six months, either party may cancel the contract forthwith. Georg Fischer TPA srl shall not be liable for any amage or loss of any kin whatsoever resulting therefrom, any suspension or cancellation being without prejuice to Georg Fischer TPA srl s right to recover all sums ue in respect of consignments elivere an costs incurre to ate. c) if the Purchaser fails to fulfil or elays in fulfilling his obligations uner the contract, in particular if he oes not ahere to the agree conitions of payment. 9.3 If for reasons attributable to Georg Fischer TPA srl a reasonable term of elivery is exceee, Georg Fischer TPA srl shall not be eeme in efault until the Purchaser has grante to Georg Fischer TPA srl in writing a reasonable extension thereof of not less than one month which equally is not met.the Purchaser shall then be entitle to cancel the contract. 9.4 If the Purchaser fails to take elivery within a reasonable time of goos notifie as reay for espatch, Georg Fischer TPA srl shall be entitle to store the goos at the Purchaser s expense an risk an to invoice them as elivere. 9.5 Partial shipments shall be allowe an Georg Fischer TPA srl shall be entitle to invoice for such eliveries. 9.6 If Georg Fischer TPA srl o not insist on the performance of a contract cancelle by the Purchaser, a penalty of 10% of the contract price shall become ue unless Georg Fischer TPA srl can prove greater amages. 10. Packing If the goos are provie with aitional packing over an above the stanar packing, such packing shall be invoice separately an be non-returnable. 11. Passing of Risk 11.1 The risk in the goos shall pass to the Purchaser as soon as they have left Georg Fischer TPA srl s works, even if elivery is mae carriage-pai, uner similar clauses or in cluing installation or when carriage is organize an manage by Georg Fischer TPA srl If elivery is elaye for reasons beyon Georg Fischer TPA srl s control, the risk shall pass to the Purchaser when he is notifie that the goos are reay for espatch. 12. Carriage an Insurance 12.1 Unless agree otherwise, the Purchaser shall bear the cost of carriage The Purchaser shall be responsible for insurance against amage of whatever kin. Even when such insurance is arrange by Georg Fischer TPA srl it shall be eeme taken out by the orer of an for the account of the Purchaser an at his risk Special requests regaring carriage an insurance shall be communicate to Georg Fischer TPA srl in ue time. Otherwise carriage shall be arrange by Georg Fischer TPA srl attheir iscretion, but without responsibility, by the quickest an cheapest methopossible. In case of carriage-pai elivery transport arrangements shall be mae by George Fischer TPA srl. If the Purchaser specifies particular requirements, any extra costs involve shall be borne by him In the event of amage or loss of the goos uring carriage the Purchaser shall mark the elivery ocuments accoringly an immeiately have the amage ascertaine by the carrier. Not reaily ascertainable amages sustaine uring carriage shall be notifie to the carrier within six ays after receipt of the goos. 13. Inspection an Acceptance 13.1 The goos will be subject to normal inspection by Georg Fischer TPA srl uring manufacture. Aitional tests require by the Purchaser shall be agree upon in writing an shall be charge to the Purchaser It shall be a conition of Georg Fischer TPA srl s obligation uner the warranties state here-inafter that Georg Fischer TPA srl be notifie in writing by the Purchaser of any purporte efect immeiately upon iscovery. Notice concerning weight, numbers or apparent efects is to be given latest within 30 ays from receipt of the goos, notice of other efects latest within the agree warranty perio. 14. Warranty 14.1 At the written request of the Purchaser, Georg Fischer TPA srl unertake to repair or replace, at their iscretion, as quickly as possible an free of charge all goos supplie which emonstrably suffer from faulty esign, materials or workmanship or from faulty oper ating or installation instructions. Replace parts shall become property of Georg Fischer TPA srl The Purchaser shall be entitle to cancel the contract or to eman a reuction in the contract price if: - repair or replacement is impossible, or - Georg Fischer TPA srl are unable or refuse to remey the efect or replace the efectivegoos within a reasonable perio of time or are unuly elaying such remey or replacement For goos which are manufacture to specifications, rawings or patterns supplie by the Purchaser, Georg Fischer TPA srl s warranty shall be restricte to proper materials an workmanship This warranty shall not apply to amage resulting from normal wear, improper storage an maintenance, failure to observe the operating instructions, overstressing or overloaing, unsuitable operating meia, improper repairs or alterations by the Purchaser or thir parties, the use of non-genuine parts an other reasons beyon Georg Fischer TPA srl s control For goos or essential components manufacture by a thir party an supplie by Georg Fischer TPA srl uner this contract, Georg Fischer TPA srl s warranty is limite to the warranty provie by sai thir party No action or claim may be brought by the Purchaser on account of any allege breach of warranty or any other obligation of Georg Fischer TPA srl after the expiration of twelve (12) months from receipt of the goos by the en user or at the latest within eighteen (18) months of the goos being espatche by Georg Fischer TPA srl. 15. imitation of iability The warranties set forth above are expressly in lieu of any express warranty of any kin an in lieu of any implie warranty, incluing any warranty of merchantability or fitness for a particular purpose. Georg Fischer TPA srl shall not be liable for any inciental special or consequential amages, such as loss of profits, loss of prouction, loss of use or loss of contract, arising for any reason, incluing amages resulting from elaye elivery, efective esign, materials or workmanship or from faulty instructions an whether such amages are claime to arise from breach of con-tract, in tort, the theory of prouct liability or otherwise; reservation is solely being mae for Georg Fischer TPA srl s statutory liability ue to material breach of an essential contractual obligation, express representations, wrongful intent, gross negligence or prouct liability acts. 16. Place of Performance an Jurisiction 16.1 Place of performance for the goos shall be the Georg Fischer TPA srl works from which the goos are espatche Any civil action base upon any allege breach of this contract shall be file an prosecute exclusively in the courts having jurisiction over the Georg Fischer TPA srl works invoicing the goos. Georg Fischer TPA srl however reserves the right to file actions in any court having juristiction over controversies arising out of or in connection with the present contract The contract shall be governe by the law applicable at the place of business of the Georg Fischer TPA srl works invoicing the goos in question.

20 GF Piping Systems > worlwie at home Our sales companies an representatives ensure local customer support in over 100 countries. The technical ata is not bining. They neither constitute expressly warrante characteristics nor guarantee properties nor a guarantee urability. They are subject to moification. Our General Terms of Sale apply. Aing Quality to People s ives Argentina / Southern South America Georg Fischer Central Plastics Suamérica S.R.. Buenos Aires, Argentina Phone gfcentral.ps.ar@georgfischer.com Australia George Fischer Pty t Riverwoo NSW 2210 Australia Phone +61(0) australia.ps@georgfischer.com Austria Georg Fischer Rohrleitungssysteme GmbH 3130 Herzogenburg Phone +43(0) austria.ps@georgfischer.com Georg Fischer Fittings GmbH 3160 Traisen Phone +43 (0) fittings.ps@georgfischer.com Belgium / uxembourg Georg Fischer NV/SA 1070 Bruxelles/Brüssel Phone +32(0) be.ps@georgfischer.com Brazil Georg Fischer ta São Paulo Phone +55(0) br.ps@georgfischer.com Canaa Georg Fischer Piping Systems t Brampton, ON 6T 4E3 Phone +1(905) Fax +1(905) ca.ps@georgfischer.com China Georg Fischer Piping Systems t Shanghai Puong, Shanghai Phone +86(0) china.ps@georgfischer.com Chinaust Plastics Corp. t. Songlinian, Zhuozhou city, Hebei province, China, Phone Fax chinaust@chinaust.com Denmark / Icelan Georg Fischer A/S 2630 Taastrup Phone +45 (0) info.k.ps@georgfischer.com Finlan Georg Fischer AB VANTAA Phone +358 (0) Fax +358 (0) info.fi.ps@georgfischer.com France Georg Fischer SAS Roissy Charles e Gaulle Ceex Phone +33(0) fr.ps@georgfischer.com Germany Georg Fischer GmbH Albershausen Phone +49(0) info.e.ps@georgfischer.com Inia Georg Fischer Piping Systems t Mumbai Phone in.ps@georgfischer.com Italy Georg Fischer S.p.A Cernusco S/N (MI) Phone it.ps@georgfischer.com Georg Fischer TPA S.r.l. IT Busalla (GE) Phone tpa.ps@georgfischer.com Japan Georg Fischer t Osaka, Phone +81(0) jp.ps@georgfischer.com Korea Georg Fischer Piping Systems Seohyeon-ong Bunang-gu Seongnam-si, Gyeonggi-o Seoul Phone Fax kor.ps@georgfischer.com Malaysia George Fischer (M) Sn. Bh Shah Alam, Selangor Darul Ehsan Phone +60 (0) my.ps@georgfischer.com Mexico / Northern atin America Georg Fischer S.A. e C.V. Apoaca, Nuevo eon CP66636 Mexico Phone +52 (81) Fax +52 (81) mx.ps@georgfischer.com Mile East George Fischer Piping Systems Dubai, Unite Arab Emirates Phone info.export@georgfischer.com Netherlans Georg Fischer N.V PA Epe Phone +31(0) nl.ps@georgfischer.com Georg Fischer Waga N.V. N-8160 AG Epe Phone +31 (0) waga.ps@georgfischer.com Norway Georg Fischer AS 1351 Ru Phone +47(0) no.ps@georgfischer.com Polan Georg Fischer Sp. z o.o Sekocin Nowy Phone +48(0) polan.ps@georgfischer.com Romania Georg Fischer Piping Systems t Bucharest - Sector 2 Phone +40(0) ro.ps@georgfischer.com Russia Georg Fischer Piping Systems Moscow Tel ru.ps@georgfischer.com Singapore George Fischer Pte t Singapore Phone +65(0) sgp.ps@georgfischer.com Spain / Portugal Georg Fischer S.A Mari Phone +34(0) es.ps@georgfischer.com Sween Georg Fischer AB Stockholm Phone +46(0) info.se.ps@georgfischer.com Switzerlan Georg Fischer Rohrleitungssysteme (Schweiz) AG 8201 Schaffhausen Phone +41(0) ch.ps@georgfischer.com Taiwan Georg Fischer Piping Systems San Chung City, Taipei Hsien Phone Fax Unite Kingom / Irelan George Fischer Sales imite Coventry, CV2 2ST Phone +44(0) uk.ps@georgfischer.com USA /Caribbean Georg Fischer C Tustin, CA Phone +1(714) Toll Free 800/ us.ps@georgfischer.com Georg Fischer Central Plastics C Shawnee, OK Phone +1(405) gfcentral.ps@georgfischer.com Vietnam George Fischer Pte t 136E Tran Vu, Ba Dinh District, Hanoi Phone Fax International Georg Fischer Piping Systems (Switzerlan) t Schaffhausen/Switzerlan Phone +41(0) Fax +41(0) info.export@georgfischer.com GFDO_6227_4 (04.11) Georg Fischer Piping Systems t Schaffhausen/Switzerlan, 2009 Printe in Germany