Type 142 Electrically Actuated Butterfly Valve

Size: px

Start display at page:

Download "Type 142 Electrically Actuated Butterfly Valve"

Marian Lee
6 years ago
Views:

Type 142 Electrically Actuated Butterfly Valve Standard Features Size 2"-8" Volatge 24 AC or DC 100-230 AC Emergency Manual Override Body Ductile iron epoxy powder coated ANSI 150 bold pattern Wetted

1 Type 142 Electrically Actuated Butterfly Valve Standard Features Size 2"-8" Volatge 24 AC or DC AC Emergency Manual Override Body Ductile iron epoxy powder coated ANSI 150 bold pattern Wetted Materials PVC, CPVC, PVDF, or PROGEF Standard Polypropylene Disc PVC, CPVC, PVDF, or PROGEF Standard Polypropylene Stem 304 Stainless Steel Seal EPDM or FPM Duty Cycle 2"-6" 50% 8" 35% Optional Features Limit switches Positioner (voltage or current) Position feedback Fail safe return Back up battery pack Heating element RS 232 Configuration tool Smart modules Cycle monitoring, cycle counter, cycle exension, motor current monitoring General The Type 142 electrically actuated butterfly valve from GF Piping Systems is adaptable to a variety of conditions and applications. It is available in PVC, CPVC, Polypropylene, and PVDF materials. WIth the optional positioner, it goes from being a simple on/off valve to a precise flow control device integrated into systems controlled by PLCs and other computerized instrumentation.

2 Product data for butterfly valves type Pressure-temperature diagram Beta-PP, PVDF (useful life 25 years; medium water) Beta-PP 1 Pressure loss DN50 DN80 DN125 DN200 DN65 DN100 DN PVDF 0.1 permissible pressure in psi temperature in F pressure loss p (bar) flow rate (l/min) medium water 20 C Pressure-temperature diagram ABS, PVC, CPVC (useful life 25 years; medium water) ABS CPVC PVC torque (Nm) Moving torques in relation to the line pressure 10 bar 5 bar nominal diameter DN (mm) permissible pressure in psi For non-gf actuators, breakaway torques 2.5 to 4 times the value of the moving torque must be taken into consideration, depending on the application conditions (e.g. control time, medium, temperature, etc.) temperature in F 2

The system overview GF Piping Systems presents the butterfly valve 568 type series for a multitude of interesting combination possibilities.

The system follows a modular design principle, enabling you to exchange individual system components quickly, easily and effortlessly.

3 The system overview GF Piping Systems presents the butterfly valve 568 type series for a multitude of interesting combination possibilities. The product range includes manual valves with hand lever or reduction gear as well as pneumatically or electrically actuated valves from DN50 to DN200. The system follows a modular design principle, enabling you to exchange individual system components quickly, easily and effortlessly. You also have a choice of materials: PVC-U, PVC- C, ABS or -PP-H and PVDF. The standard sealing materials are EPDM and FPM, but other materials are also available on request. All the customary installation pipe standards are supplied: metric: DIN, EN, ISO inch: ASTM Standard lug-type butterfly valve/end installation Type 568 Standard Wafer-type butterfly valve Type 567 with fine adjustment With this wide range of products to choose from, you can always rely on having the best possible solution for your application. The butterfly valve type 568 from GF Piping Systems conforms to the following international standards: EN ISO Industrial valves thermoplastic butterfly valves ISO 9393 Thermoplastic valves pressure test methods and requirements Face-to-face length according to ISO 5752 (average) Approvals: GL, LR, BV, RINA, ABS, DNV, CCS, RMRS Approvals pending: DIBt, NSF61 with reduction gear with pneumatic actuator single acting with pneumatic actuator double acting; optional manual override with electric actuator: optional manual override 3

4 Technical Specifications EA 31 EA 42 Size Nominal torque Mdn 60 Nm/530 in-lbs 100 Nm/885 in-lbs Peak torque 120 Nm/1060 in-lbs 200 Nm1770 in-lbs Control time 15 s/90 at Nominal Torque 25 s/ 90 at Nominal Torque Actuating angle max. 180 set to 90 max. 180 set to 90 L/W/H (dimensions in mm) 150/122/ /122/208 Cycles at 68 and Nominal Torque 100,000 75,000 Flange Pattern F07 F07 Housing Materials PP fiberglass reinforced, flame retardent, captive stainless steel screws externally PP fiberglass reinforced, flame retardent, captive stainless steel screws externally Position indicator optical, integrated optical, integrated Emergency manual override integrated integrated Rated voltage V, 50/60 Hz 24V = /24V, 50/60Hz V, 50/60 Hz 24V = /24V, 50/60 Hz Rated voltage tolerance +/- 10% +/- 10% Rated output 32 Watts 42 Watts Direct impedance 230V, 100k 24V, 4K7 230V, 100k 24V, 4k7 Duty cycle 50% 35% Protection class Overload protection IP 65 per EN (3): CSA for interior use UL pending current/time dependent (resting) (1), temperature dependent IP 65 per EN (3): CSA for interior use UL pending current/time dependent (resting) (1), temperature dependent Overvoltage category (5) II II Electrical connections connector plug 3 P+E per DIN EN (formerly DIN 43650), screw cable gland 20x1.5per ISO 724 connector plug 3 P+ E per DIN EN (formerly DIN 43650), screw cable gland M20x1.5 per ISO 724 Pollution grade (5) 2 2 Height over NN (UL/CSA) <200m <200m Ambient temperature 14 to +122 F 14 to +122 F Allowable humidity max. 90% relative humidity, non-condensing max. 90% relative humidity, non-condensing [1] Overload protection of the motor is dimensioned so that the motor and the power supply board are protected. As soon as the load is in the torque range, the actuator runs again [2] At temperatures below 14 F and if there is condensation, the heating element No should be built in [3] Protection class IP67 for use of cable glands and vertical installation [4] Linear decrease up to 50% relative humidity at 104 F [5] According to DIN EN

5 Type 142 Electrically Actuated Butterfly Valve Without manual override Inch Cv-value [gal/min] psi Actuator unit type D D1 d2 H H EA-31 5/ ½ EA-31 5/ EA-31 5/ EA-31 5/ EA-31 3/ EA-31 3/ EA-42 3/ H2 H3 L L1 L2 Q1 Q With manual override Inch Cv-value [gal/min] psi Actuator unit type D D1 d2 H H EA-31 5/ ½ EA-31 5/ EA-31 5/ EA-31 5/ EA-31 3/ EA-31 3/ EA-42 3/ H2 H3 H4 L L1 L2 L3 L4 Q1 Q

GF Piping Systems > worldwide at home Our sales companies and representatives ensure local customer support in over 100 countries. www.piping.georgfischer.com The technical data is not binding.

6 GF Piping Systems > worldwide at home Our sales companies and representatives ensure local customer support in over 100 countries. The technical data is not binding. They neither constitute expressly warranted characteristics nor guaranteed properties nor a guaranteed durability. They are subject to modification. Our General Terms of Sale apply. Adding Quality to People s Lives Australia George Fischer Pty Ltd Riverwood NSW 2210 Australia Phone +61(0) australia.ps@georgfischer.com Denmark / Iceland A/S 2630 Taastrup Phone +45 (0) info.dk.ps@georgfischer.com Korea Piping Systems Guro-3 dong, Guro-gu, Seoul, Korea Phone +82(0) Fax +82(0) kor.ps@georgfischer.com Poland Sp. z o.o Warszawa Phone +48(0) poland.ps@georgfischer.com Sweden / Finland AB Älvsjö-Stockholm Phone +46(0) info.se.ps@georgfischer.com Austria Rohrleitungssysteme GmbH 3130 Herzogenburg Phone +43(0) austria.ps@georgfischer.com Belgium / Luxembourg NV/SA 1070 Bruxelles/Brüssel Phone +32(0) be.ps@georgfischer.com Brazil George Fischer Ltda São Paulo Phone +55(0) br.ps@georgfischer.com Canada Piping Systems Ltd Brampton, ON L6T 4E3 Phone +(905) ca.ps@georgfischer.com China Piping Systems Ltd Shanghai Pudong, Shanghai Phone +86(0) china.ps@georgfischer.com France SAS Roissy Charles de Gaulle Cedex Phone +33(0) fr.ps@georgfischer.com Germany GmbH Albershausen Phone +49(0) info.de.ps@georgfischer.com India Piping Systems Ltd Mumbai Phone in.ps@georgfischer.com Italy S.p.A Cernusco S/N (MI) Phone it.ps@georgfischer.com Japan Ltd Osaka, Phone +81(0) jp.ps@georgfischer.com Malaysia (M) Sdn. Bhd Shah Alam, Selangor Phone +60 (0) conne.kong@georgfischer.com Mexico S.A. de C.V. Apodaca, Nuevo Leon CP66636 Mexico Phone +52 (81) Fax +52 (81) Middle East George Fischer Piping Systems Dubai, United Arab Emirates Phone info.export@georgfischer.com Netherlands N.V PA Epe Phone +31(0) nl.ps@georgfischer.com Norway AS 1351 Rud Phone +47(0) no.ps@georgfischer.com Romania Piping Systems Ltd Bucharest - Sector 2 Phone +40(0) ro.ps@georgfischer.com Russia Piping Systems Moscow Tel ru.ps@georgfischer.com Singapore George Fischer Pte Ltd Singapore Phone +65(0) sgp.ps@georgfischer.com Spain / Portugal S.A Madrid Phone +34(0) es.ps@georgfischer.com Switzerland Rohrleitungssysteme (Schweiz) AG 8201 Schaffhausen Phone +41(0) ch.ps@georgfischer.com Taiwan Piping Systems San Chung City, Taipei Hsien Phone Fax United Kingdom / Ireland George Fischer Sales Limited Coventry, CV2 2ST Phone +44(0) uk.ps@georgfischer.com USA / Latin America / Caribbean LLC Tustin, CA Phone +1(714) Toll Free us.ps@georgfischer.com Item #M115 (3/09) LLC 2009 Printed in U.S.A.

Type 242 Pneumatically Actuated Butterfly Valve

Type 242 Pneumatically Actuated Butterfly Valve Standard Features Size 2"-8" Body Ductile Iron poxy powder coated ANSI 15 bold pattern Wetted Materials PVC, CPVC, PROGEF Standard Polypropylene, SYGEF PVDF