Main material GFRPP IWAKI MAGNETIC DRIVE PUMPS

Transcription

1 Main material IWAKI MAGNETIC DRIVE PUMPS

2 A worldwide best-seller, our high-quality compact magnetic drive pumps Our series leak-free compact magnetic pumps are a worldwide best-seller and are used in medical equipment, analyzers, constant-temperature baths and surface treatment equipment for chemical feeding in more than thirty countries worldwide. Leak free Magnetic drive seal-less pumps are free from leakage problems and the need for seal replacement. This feature and their compact nature make them ideal for built-in applications. Large selection The series comprises 50 models. The high-head type(-z), the high flow type(-x) and threaded connection type(-m) are available as well as a standard type. The series offers the largest selection in the world. -K -K -15R -0R -30R - 50/ Max Discharge capacity 5.5/.0-11/1 L/min Max Discharge head / /.7 m / Max Discharge capacity /11-75/85 L/min Max Discharge head 1.8/ /13.5 m 1

3 IWAKI MAGNETIC DRIVE PUMPS Operating Principle The centrifugal pump is driven by a pair of magnets which are incorporated in the impeller and motor shaft. The sealless pump structure eliminates shaft seals such as conventional mechanical seals because the pump chamber is shielded by the casings and the impeller is operated by the magnets. The combined coupling torque of the drive magnet and impeller magnet gives sufficient driving power against the motor torque. Driven magnet Drive magnet High corrosion-resistance (Grass fiber reinforced polypropylene) wet ends of the series handle a wide range of chemicals. Easy maintenance The pump unit is comprised of a small number of integrated parts, so maintenance is greatly simplified. -R -55R -70R -0R / Max Discharge capacity Max Discharge head /43-135/135 L/min 5./ /0.3 m

4 Wide variation Easy maintenance The series has wet ends. Hose connections, threaded connections and flange connections (only 70 0 size) are available. A large selection of models offer a wide flow range of L/min. Outline of the series Main Material Models Max. discharge capacity (L/min) Max. discharge head (m) Limit of specific gravity -K -ZK High head type -K -15R -0R RX Large capacity type -0RZ High head type -30R RX Large capacity type -30RZ High head type -R -RX Large capacity type -RZ High head type RZ-5 only R R-5 only R -70RZ High head type -0R R-5 only

5 IWAKI MAGNETIC DRIVE PUMPS Standard type High-head type Large capacity type Construction Motor Drive magnet O ring The - or 8-pole high power ferrite magnet drives the impeller through the rear casing. Rear casing Spindle single-piece rear casing has the bearing mounted at the bottom to support the spindle. Note: -K, ZK and K models do not have the bearing. Front casing Hose or threaded connections can be selected according to application. Also union joints can be installed on threaded connection models. Note: -K, ZK and K models do not have thread connection type. Impeller The ferrite magnet is encapsulated into the impeller. For rotating spindle models, an alumina ceramic spindle is integrally molded with the impeller. Open, closed or semi-open type impellers can be selected according to performance requirements. Note: -K, ZK and K models use a fixed spindle design. Hose connection type Thread connection type High-head type RZ Large-capacity type RX 4

6 - K ZK K 50/ Hz Max Discharge capacity Max Discharge head 5.5/.0-11/1 L/min / /.7 m -K -K Specifications (50/) Hose connection Max. Capacity Max.Head S.G. Output Input Power source Mass Model Inlet (mm) Outlet (mm) L/min m W W kg -K 8.0 / 9.0 / / 1 0V -ZK /.0.1 /.7 5 / 5 13 / Single phase -K 11 / /.1 13 / 15 Temperature range: 0-80 C (Contact us for applications below zero.) Limit of viscosity: 30 mpa s (at 1 S.G.) Ambient temperature: 0 - C Motor type: Capacitor-run induction motor -K, ZK and K do not have thread connection type. Construction and materials Illustlation shows model -K Impeller Front casing O ring FKM or EPDM(Special order) Spindle Pump identification Pump size, - ZK - E N Type K: ZK: High head type Type No mark: FKM E: EPDM(Special order) Thrust ring High density polyethylene FKM EPDM Glass fiber reinforced polypropylene Fluorine rubber Ethylene propylene rubber Dimensions (mm) -K -ZK -K (8) (8) (8) (73) 30 (19) 74 (73) (73) [5.5 9] [5.5 9] [5.5 9] (19) (19) 5

7 ZK IWAKI MAGNETIC DRIVE PUMPS Performance curves 3 3 Head (m) ZK Head (m) K 1 K 1 K K Capacity (L/min) Capacity (L/min) - -Z Specifications (50/) Hose connection Max. Capacity Max.Head S.G. Output Input Model Inlet (mm) Outlet (mm) L/min m W W / 9.0 / / 3 -Z /.0.1 /.7 3 / / /.1 / Power source / 0V Single phase Temperature range: 0-80 C (Contact us for applications below zero.) Limit of viscosity: 30 mpa s (at 1 S.G.) Ambient temperature: 0 - C Motor type: Shaded pole motor -, Z and do not have thread connection type. Mass Kg 0.9 Pump identification Dimensions (mm) - Z - -Z - Pump size, Type No mark: Z: High head type (9) 45 (9) 45 (9) ø5.4 ø5.4 ø (4) (4) (4)

8 / Hz Max Discharge capacity Max Discharge head /11-75/85 L/min 1.8/ /13.5 m 15-15R 0-0R Specifications (50/) Model -15R -0R -0RX -0RZ -30R -30RX -30RZ -R -RX -RZ -RZ-5 Hose connection Thread connection (Note) R RZ RX R-M RZ-M RX-M Max. Capacity Max.Head S.G. Output Input Power source Mass Inlet (mm) Outlet (mm) (Note1) Inlet/Outlet Union (mm) (L/min) (m) (W) (W) (kg) G3/4 G3/ / 19 7 /.4 / / / / 1. G1 0 4 / / / 0 / G3/4 13 / / G3/4 1 3 / / / 80 G1 0 / 7.9 / / / 90.5 G3/ / 8.0 / G3/ / 5 4. /.5 90 / 130 G / / / 5 85 / / / / G3/ / /- 5 /- 3 /- 0V/00V Single phase 0V - V Single phase Temperature range: 0-80 C (Contact us for applications below zero.) Limit of viscosity: 30 mpa s (at 1 S.G.) Ambient temperature: 0 - C Motor type: Capacitor-run induction motor Note 1: The union field shows the nominal diameter of the applicable VP vinyl chloride hose. Heat resistance of the standard union is 0-55 C and that of the heat resistant union is 0-80 C. Note : Single phase of 00V model is special order. Please contact us for details Construction and materials Illustlation shows model -30R O ring FKM or EPDM Pump identification - 30 RZ -5 M - 0 E N Impeller Front casing Thrust ring CFRPPS PTFE FKM EPDM Glass fiber reinforced polypropylene Carbon fiber reinforced polyphenylene sulfide Polytetrafluoroethylene ( Teflon, etc.) Fluorine rubber Ethylene propylene rubber Spindle Bearing CFRPPS or PTFE Pump size 15, 0, 30, Type R: RZ: High head type RX: High capacity type Frequency No mark: common 50/ - 5: only (for RZ) Material of O ring No mark: FKM (Standard) E: EPDM (Special order) Motor No mark: 0V single phase 00: 00V single phase 0: 0V - V single phase Connection No mark: Hose type M: G thread connection 7

9 IWAKI MAGNETIC DRIVE PUMPS 30-30R -R Performance curves RZ-5 RZ 1 RZ 8 30RZ Head (m) 30RZ Head (m) 8 0RZ 0RZ 4 R 4 15R 0R 30R 0RX 30RX RX 15R 0R 30R 0RX R 30RX RX Capacity (L/min) Capacity (L/min) Dimensions (mm) -15R 0R 30R R Illustration shows -30R e f -0RZ 30RZ RZ Illustration shows -0RZ e f -0RX 30RX RX Illustration shows -RX e d d d H H H a b L g c W a c a c i b g i i W b g W L L Model -15R -30R -R W H L a b c d e f g i Model W H L a b c d e f g i 95-0R (114) (9) 5 (.3) Dimension of the ( ) inside are thread connection type (03) (33) 9 94 (88) ø5. 4 [ ] 4 ø9-0rz -30RZ -RZ -RZ-5-0RX -30RX -RX (1) 137 (1) 137 (1.5) Dimension of the ( ) inside are thread connection type. RZ type (Hose connection) and RZM type (Thread connection type) are the same dimensions [ ] 4 ø9 4 [ ] 4 ø9 8

10 / Hz Max Discharge capacity Max Discharge head /43-135/135 L/min 5./ /0.3 m R Specifications (50/) Model -55R -55R-5-70R -70RZ -0R -0R-5 Construction and materials Illustlation shows model -55R/70R Hose connection Thread connection (Note) R RZ R-M RZ-M Diameter of Power source Max. Capacity Max.Head S.G. Output Input Mass (Note1) flange Inlet (mm) Outlet (mm) Inlet/Outlet Union (mm) (L/min) (m) (W) (W) Single phase Three phase (kg) G / / / / /- 8. /- 90 / - 0 /- G1 0 0A 8 / 97.7 / / / G3/4 1 - / / / 1 75 / 395 G1 0 5A / / / 5 45 / / / - / - 35 / - Pump identification 0V/00V/ 0V - V - 0V/380V/ 0V/4V Temperature range: 0-80 C (Contact us for applications below zero.) Limit of viscosity: 30 mpa s (at 1 S.G.) Ambient temperature: 0 - C Motor type: Capacitor-run induction motor Note 1: The union field shows the nominal diameter of the applicable VP vinyl chloride hose. Heat resistance of the standard union is 0-55 C and that of the heat resistant union is 0-80 C. Note : Single phase of 00V model is special order. Please contact us for details. Impeller O ring FKM or EPDM (Special order) Spindle - 0 R -5 M Pump size 55, 70, Front casing Type R: RZ: High head type (Only 70RZ) Thrust ring Illustlation shows model -70RZ/0R Retainer ring SUS304 Impeller Front casing Bearing PTFE O ring FKM or EPDM (Special order) Spindle Frequency No mark: common 50/ - 5: only (Without model 70R) Connection No mark: Hose type M: G thread connection -55R-5M, -0R-5M M-FL: Flange connection (Without model 55R) (Note1) Specify the pump model and power specification at an inquiry phase. Note1: For the -0 of flange connection type, the model code is different from others. -0RM-5-FL CFRPPS PTFE FKM EPDM Glass fiber reinforced polypropylene Carbon fiber reinforced polyphenylene sulfide Polytetrafluoroethylene ( Teflon, etc.) Fluorine rubber Ethylene propylene rubber Thrust ring Bearing CFRPPS 9

11 IWAKI MAGNETIC DRIVE PUMPS 0-70R 0-0R Performance curves 14 70RZ RZ 1 0R Head (m) 8 55R-5 Head (m) 1 0R 0R R 70R 55R 4 55R Capacity (L/min) Capacity (L/min) Dimensions (mm) ( ): Thread connection type -55R 55R-5 Illustration shows -55R -70R -70RZ 1.5(.8) (15.8) 0 4 [7 11] 1 4 [7 11] RM-FL -0R 0R-5 Illustration shows -0R RM-FL 0RM-5-FL ø [7 11] [9 7] [9 7]

12 IWAKI MAGNETIC DRIVE PUMPS Special accessories Union joint Special-purpose union joints are available to cope with three types (13mm, 1mm and 0mm dia.) of piping. Tight sealing O-rings are used to prevent thread damage caused by over-tightening. Self-priming chamber Once fill up liquid, repriming is not required. It is very easy to use pump with self-priming chamber. Specifications Model 13A H13A 1A H1A 0A H0A Material PVC HT-PVC PVC HT-PVC PVC HT-PVC Range of temp C 0-80 C 0-55 C 0-80 C 0-55 C 0-80 C Material of O ring FKM or EPDM Specifications Model SC-4V SC-4E SC-7V SC-7E Material of O ring FKM EPDM FKM EPDM Connection G3/4 G1 Suction limit 0.8 m 1. m Range of tank 0.8 L 1.3 L Applicable pump -30RM-N, -RM-N -70RM Note: Self-priming height depends on liquid temperature and characteristics. - Kanda-Sudacho -chome Chiyoda-ku Tokyo Japan TEL : (81) FAX : IWAKI has global net work. Please find your distributor location at European office Germany Holland Italy Spain Belgium Denmark Finland France Norway Sweden U.K. : IWAKI Europe GmbH : IWAKI Europe GmbH : IWAKI Europe GmbH (Netherlands Branch) : IWAKI Europe GmbH (Italy Branch) : IWAKI Europe GmbH (Spain Branch) : IWAKI Belgium N.V. : IWAKI Nordic A/S : IWAKI Suomi Oy : IWAKI France S.A. : IWAKI Norge AS : IWAKI Sverige AB : IWAKI Pumps (UK) Ltd. TEL: (49) TEL: (49) TEL: () TEL: (39) TEL: (34) TEL: (3) TEL: (45) TEL: (358) TEL: (33) TEL: (47) TEL: (4) TEL: (44)43 33 FAX: FAX: FAX: (49) FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: ( )Country codes Caution for safety use: Before use of pump, read instruction manual carefully to use the product correctly. Legal attention related to export. U.S.A. Argentina Singapore Indonesia Malaysia Australia Hong Kong China Korea Taiwan Thailand Vietnam : IWAKI America Inc. : IWAKI America Inc. (Argentina Branch) : IWAKI Singapore Pte Ltd. : IWAKI Singapore (Indonesia Office) : IWAKIm Sdn. Bhd. : IWAKI Pumps Australia Pty Ltd. : IWAKI Pumps Co., Ltd. : GFTZ IWAKI Engineering & Trading Co., Ltd. : IWAKI Pumps (Shanghai) Co., Ltd. : IWAKI Korea Co.,Ltd. : IWAKI Pumps Taiwan Co., Ltd. : IWAKI (Thailand) Co.,Ltd. : IWAKI Pumps Vietnam Co., Ltd. TEL: (1) TEL: (54) TEL: (5) 08 TEL: ()1 90 TEL: () TEL: (1) TEL: (85)7 118 TEL: (8) TEL: (8) TEL: (8) TEL: (88) TEL: () TEL: (84) Actual pumps may differ from the photos. Specifications and dimensions are subject to change without prior notice. For further details please contact us. Our products and/or parts of products fall in the category of goods contained in control list of international regime for export control. Please be reminded that export license could be required when products are exported due to export control regulations of countries. FAX: FAX: FAX: FAX: FAX: FAX: 7 00 FAX: FAX: FAX: FAX: FAX: FAX: The posting and copying from this catalogue without permission is not accepted firmly. CAT-A PDF