ijoint Compression Fittings

Size: px

Start display at page:

Download "ijoint Compression Fittings"

Drusilla Sims
5 years ago
Views:

1 GF Piping Systems Prouct Range 2014 ijoint Compression Fittings

The ijoint focuses on safety an ergonomic hanling real benefits for our customers The new line of compression fittings from GF Piping Systems has been specially evelope for use in water systems,

2 The ijoint focuses on safety an ergonomic hanling real benefits for our customers The new line of compression fittings from GF Piping Systems has been specially evelope for use in water systems, assuring a quicker an easier installation compare to a traitional compression fitting. The lip sealing system makes this prouct both unique an long-lasting. Superb quality an innovative features preestine ijoint for the rinking water market worlwie. ijoint comprises all the benefits of plastics: no rust an no incrustation, lightweight construction, no leakage, excellent pressure resistance just to name a few. To sum it up: ijoint provies an excellent cost-benefit ratio with a life cycle of at least 50 years. Features Nut Ergonomic esign for easy hanling ip gasket Special esign for increase performance Clamp ring No interference uring pipe insertion an maximun pull out resistance ocke thrust ring Compresses the profile gasket Stop ring efines locking position for the nut 2

ijoint the next generation of polypropylene compression fittings Benefits ijoint is the result of GF Piping Systems unrelenting commitment to continuous improvement an a culture base on innovation an

The innovative esign provies essential benefits like fast, forgiving an effortfree installation methos in challenging trench an weather situations, ensuring maximum lifetime an high flow capacity for

Fast an easy installation ijoint comes reay for installation, no isassembling of the fitting is require.

3 ijoint the next generation of polypropylene compression fittings Benefits ijoint is the result of GF Piping Systems unrelenting commitment to continuous improvement an a culture base on innovation an ingenuity. The innovative esign provies essential benefits like fast, forgiving an effortfree installation methos in challenging trench an weather situations, ensuring maximum lifetime an high flow capacity for top performance in water applications. The ijoint range contains straight an reucing joiners, tees, elbows, threae connectors, en caps an metal transition aaptors ranging from 20 to 110 mm. Fast an easy installation ijoint comes reay for installation, no isassembling of the fitting is require. Easy pipe insertion even for bigger imensions ue to the fact, that there is no contact between the clamp ring an the pipe uring insertion. No special tools or equipment are require for the installation. ip gasket The special lubricate NBR lip gasket allows a smooth pipe insertion even without pre-lubrication of the pipe. The special lip profile provies outstaning hyraulic performance even in case of ovalize, scratche or unersize pipes. Safe esign an long life time The special esign in combination with the use of top quality raw materials enables high pressure an pull-out resistance throughout the complete range, also in case of water hammer. The en-stop for the nut works as a very helpful inicator of the proper nut closing position. An antirotation stop prevents the nut from working itself loose. All components are fixe in the boy so that they cannot be lost even in the unluckily event of isassembly. 3

Conformity to all important stanars an availability in a wie range of iameters makes ijoint your first choice ijoint compression fittings are suitable for use with all types of polyethylene pipes PE

The pipe can be inserte irectly without loosening the nut or isassembling the fitting.

4 Conformity to all important stanars an availability in a wie range of iameters makes ijoint your first choice ijoint compression fittings are suitable for use with all types of polyethylene pipes PE 80, PE 100, PEX an PVC-U with special transition kit. The fitting is reay to be installe out of the box without any preparation. The pipe can be inserte irectly without loosening the nut or isassembling the fitting. There is a 16 bar resistance throughout the complete range of ijoint fittings, with approvals accoring to the most stringent regulations worlwie. The special lip gasket grants a perfect performance even with ovalise, scratche an unersize pipes. Technical specifications From ø 20 to 63 Pressure range MOP of 16 bar for the complete range of ijoint fittings from 20 to 110 mm (complete range VGW approve 16) Temperature range -10 C to +45 C Materials Boy an thrust ring UV stabilize polypropylene impact Copolymer with high long term aging stability complying with ISO Nut UV stabilize blue polypropylene Impact Copolymer Clamp ring Polyacetal (POM) ubricate lip gasket Foo-safe NBR rubber suitable for potable water. Reinforcement ring (for female threa) Stainless steel AISI 430 Regulation for rinking water Approvals Stanars Test stanars ijoint compression fittings comply with the strictest worlwie regulations, e.g.: W270 an KTW (Germany) ATA (Netherlans) M /04/2004 (Italy) Global Mark (Australia) ACS (France) VGW (Germany) IIP (Italy) SVGW (Switzerlan) KIWA (Netherlans) ACS (France) Global Mark (Australia) For PE pipes: IN EN 12201; ISO ; IN 8074; EN /2; AS/NZS 4130; BS 6572; BS 6730; ISO 4427; UNI 7990; ISO Threas IN EN (ISO 7-1); BS 21; AS Flanges IN EN1092-1; IN ISO 14236; IN ; AS/NZS 4129; BR K534/03 UNI; ISO 3501; ISO 3503; ISO 3458; ISO 3459; VP609 From ø 75 to 110 4

The comprehensive ijoint system is ieal for new installations as well as renovations or extensions of

This wie-ranging system lens itself to new installations as well as to renovation or extension work on

ijoint can be use for iverse applications an its esign benefits a vast number of inustries.

5 The comprehensive ijoint system is ieal for new installations as well as renovations or extensions of existing water lines Applications ijoint is esigne for use in house connections an service lines. This wie-ranging system lens itself to new installations as well as to renovation or extension work on existing water lines. ijoint can be use for iverse applications an its esign benefits a vast number of inustries. In aition, ijoint is the perfect solution for bypass systems, where temporarily lai lines nee to be isassemble in a quick an easy way. Water istribution ines House Connections High-en Irrigation Water istribution ines House Connections an Service ines Pressure Sewage Inustrial Applications Mining Inustry eisure Parks Golf Courses Camping Grouns Farming Greenhouses High-en Irrigation 5

6 ijoint Installation manual Observe installation manual The installation manual is part of the prouct an an important moule of the safety concept. Rea an observe installation manual. Installation manual must be available for the prouct. Pass installation manual to following users of the prouct. Intene use The ijoint fittings are intene exclusively for conveying meia in the allowable pressure an temperature range in piping systems into which they have been installe. Application: Water Regaring to this ocument The ocument escribes all important information to install the prouct. Relate ocuments to this installation manual Georg Fischer Planning Funamentals This ocument may be obtaine from your GF Piping Systems sales company or via Requirements for user an operator responsibility For safety use an to guarantee the operation please note: The ijoint fittings must only be use accoring to the specifications Assembly an Installation must be carrie out by qualifie personnel Piping system must be installe by professionals. Users an operators must be instructe on a regular basis in all aspects of work safety an environmental protection especially those pertaining to pressurebearing piping system Users an operators must be familiar with the operating instructions an must ahere to the information containe therein. Transport an storage The ijoint fittings shoul be transporte an store in its original packaging The ijoint fittings must be protecte from harmful influences such as irt an especiheat an UV raiation The technical ata are not bining. They neither constitute expressly warrante characteristics nor guarantee properties nor a guarantee Installation manual Ø 20-63mm Before proceeing with the assembly, check the presence of all components (clamp ring, thrust ring an lip gasket). Cut the pipe square an eburr it. Mark the insert epth on the pipe (see table: insert epth). Push the pipe into the fitting until the first stop, meaning you have reache the gasket. Push the pipe through the gasket until you reach the pipe stop of the fitting. Check the mark of the insert epth on the pipe for correct assembly. Insert epth Fittings Ø mm Tighten the nut as tightly as possible by han up to 32 mm an use the Georg Fischer tool or a wrench for fittings from 40 mm. For maximum pull out resistance tighten the nut until the stop ring. Flange Fittings Ø mm

Ø 75-110mm Before proceeing with the assembly,check the presence of all components (clamp ring, thrust ring an gasket). 1. 2.

Tighten the nut as tightly as possible using the Georg Fischer tool or a wrench for fittings. For maximum pull out resistance tighten the nut until the stop ring.

Cut the pipe close to the amage. The maximum pipe gap (Z) is marke on the fitting boy an correspons to the fitting iameter (see also table for pipe gap).

20 5 20 25 5 25 32 5 32 40 5 40 50 5 50 63 5 63 75 20 75 90 20 90 110 20 110 Insert the fitting on one sie of the pipe.

7 Ø mm Before proceeing with the assembly,check the presence of all components (clamp ring, thrust ring an gasket) Cut the pipe square an eburr it without chamfer. Push the pipe into the fitting until you have reache the pipe stop. 3. Tighten the nut as tightly as possible using the Georg Fischer tool or a wrench for fittings. For maximum pull out resistance tighten the nut until the stop ring. ijoint Repair coupling Installation manual Before proceeing with the assembly, check the presence of all components (clamp ring, thrust ring an lip gasket). Cut the pipe close to the amage. The maximum pipe gap (Z) is marke on the fitting boy an correspons to the fitting iameter (see also table for pipe gap). Chamfer the pipes. ubrication of the gasket will facilitate insertion. Mark the pipe as inicate above. Pipe gap Ø Z (mm) (mm) min. max Insert the fitting on one sie of the pipe. If necessary, lubricate the gasket with a lubricant approve for potable water. Align the two pipes an slie the fitting till the marks on the pipes. Tighten the nuts as tightly as possible using the GF Piping Systems tool for the ijoint or a wrench for fittings. For an maximum pull out resistance tighten the nut until the stop ring. 7

ijoint COMPRESSION FITTINGS Male aaptor installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water male threa: ISO 7 (conical) R [inch] coe SP GP weight 20

050 53 79 59 21 14 25 3 4 16 158 400 127 1 180 0.056 53 80 59 21 15 25 1 16 158 400 128 1 170 0.057 53 83 59 21 17 32 3 4 16 158 400 129 1 120 0.088 64 88 66 23 15 32 1 16 158 400 130 1 120 0.

8 ijoint COMPRESSION FITTINGS Male aaptor installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water male threa: ISO 7 (conical) R [inch] coe SP GP weight Female aaptor with stainless steel reinforcement ring (AISI430) installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water female threa: ISO 7 (parallel) Rp [inch] coe SP GP weight table continue next page 8

Rp [inch] coe SP GP weight 40 1 1 2 16 158 400 098 70 0.175 75 108 76 26 22 50 1 16 158 400 099 40 0.280 97 117 88 30 20 50 1 1 4 16 158 400 100 40 0.287 97 119 88 30 22 50 1 1 2 16 158 400 101 40 0.

9 Rp [inch] coe SP GP weight Reucing coupling installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water - coe SP GP weight l

Coupling installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water coe SP GP weight 20 16 158 400 001 1 150 0.066 45 112 54 19 25 16 158 400 002 1 100 0.

727 114 213 104 35 75 16 158 400 007 12 1.347 135 273 133 41 90 16 158 400 008 4 2.164 161 306 150 44 110 16 158 400 009 3 3.

140 0.071 45 129 21 25 16 158 400 169 1 100 0.107 53 144 25 32 16 158 400 170 1 50 0.171 63 165 33 40 16 158 400 171 35 0.275 75 193 41 50 16 158 400 172 24 0.542 97 225 50 63 16 158 400 173 14 0.

10 Coupling installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water coe SP GP weight Repairing coupling (without pipe stop) installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water coe SP GP weight Tee installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water coe SP GP weight H

90 Reucing-Increasing Tee installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water -- table continue next page coe SP GP weight 20 25 20 16 158 400 200 1

11 90 Reucing-Increasing Tee installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water -- table continue next page coe SP GP weight l4 H Tee with threae male off take installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water male threa: ISO 7 (conical) R [inch] coe SP GP weight H

R [inch] coe SP GP weight H 63 2 16 158 400 217 8 0.880 114 288 104 35 24 85 63 2 1 2 16 158 400 218 8 0.926 114 288 104 35 28 89 75 2 1 2 16 158 400 219 7 1.

022 185 484 175 53 36 138 90 Tee with threae female off take with stainless steel reinforcement ring (AISI430) installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for

12 R [inch] coe SP GP weight H Tee with threae female off take with stainless steel reinforcement ring (AISI430) installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water female threa: ISO 7 (parallel) Rp [inch] coe SP GP weight H

90 Elbow installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water coe SP GP weight 20 16 158 400 070 1 150 0.066 45 67 54 19 25 16 158 400 071 1 100 0.

821 114 144 104 35 75 16 158 400 076 8 1.479 135 180 133 41 90 16 158 400 077 3 2.435 161 207 150 44 110 16 158 400 078 2 3.

13 90 Elbow installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water coe SP GP weight Elbow with threae male off take installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water male threa: ISO 7 (conical) R [inch] coe SP GP weight H

90 Elbow with threae female off take with stainless steel reinforcement ring (AISI430) gasket: NBR quality for rinkable water installation without isassembling suitable for PE an PEX pipes female

060 53 75 59 21 15 40 25 3 4 16 158 400 025 1 150 0.060 53 75 59 21 16 44 25 1 16 158 400 026 1 125 0.078 53 75 59 21 16 44 32 1 2 16 158 400 027 1 110 0.

14 90 Elbow with threae female off take with stainless steel reinforcement ring (AISI430) gasket: NBR quality for rinkable water installation without isassembling suitable for PE an PEX pipes female threa: ISO 7 (parallel) Rp [inch] coe SP GP weight H Elbow installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water coe SP GP weight

45 Elbow with threae male off take installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water male threa: ISO 7 (conical) R [inch] coe SP GP weight H 20 1 2

157 75 96 76 26 20 41 50 1 1 2 16 158 400 014 35 0.269 97 113 88 30 20 44 63 2 16 158 400 015 20 0.

3 50 40 1 1 2 16 158 400 114 16 1.131 97 110 150 118 88 30 50 50 2 16 158 400 115 16 1.680 97 125 160 119 88 30 63 50 2 16 158 400 116 12 1.277 114 125 160 13 104 35 63 65 2 1 2 16 158 400 117 12 1.

561 161 160 205 192 150 44 90 100 4 16 158 400 121 5 2.892 161 180 220 195 150 44 110 100 4 16 158 400 122 4 3.

15 45 Elbow with threae male off take installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water male threa: ISO 7 (conical) R [inch] coe SP GP weight H Flange joint with metal flange installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water flange: steel N N [inch] coe GP weight En cap installation without isassembling suitable for PE an PEX pipes gasket: NBR quality for rinkable water coe SP GP weight

Metal tightening wrench for ijoint fittings - coe GP weight 1 20 75 158 500 998 2 0.626 540 115 63 110 158 500 999 2 1.

with hexagon starting from R 1 1 /4 R [inch] coe GP weight 20 1 2 158 400 281 25 0.121 45 100.6 14.7 54 19 25 3 4 158 400 282 15 0.210 53 108.9 15.0 59 21 32 3 4 158 400 283 12 0.241 64 117.2 15.0 66 23 32 1 158 400 284 12 0.

16 Metal tightening wrench for ijoint fittings - coe GP weight Metal transition coupling male installation without isassembling suitable for PE an PEX pipes / brass gasket: NBR quality for rinkable water male threa: ISO 7 (conical) brass Metal insert with hexagon starting from R 1 1 /4 R [inch] coe GP weight Metal transition coupling female installation without isassembling suitable for PE an PEX pipes / brass gasket: NBR quality for rinkable water female threa: ISO 7 (parallel) brass Metal insert with hexagon starting from Rp 1 1 /4 Rp [inch] coe weight

Reuction KIT gasket: NBR quality for rinkable water non-compliance with ijoint repairing coupling - coe SP GP weight 25-20 158 400 304 1 10 0.021 32-20 158 400 305 1 10 0.040 32-25 158 400 306 1 10 0.

17 Reuction KIT gasket: NBR quality for rinkable water non-compliance with ijoint repairing coupling - coe SP GP weight PVC KIT suitable for PVC-U an ABS pipes with PVC-U pipe: maximum operating pressure 16 with ABS pipe: maximum operating pressure 16 an stainless steel AISI304 non-compliance with ijoint repairing coupling coe SP GP weight

ijoint SPARE PARTS Nut coe GP weight 20 158 400 266 96 0.015 25 158 400 267 45 0.

095 63 158 400 271 8 0.169 75 158 400 272 36 0.310 90 158 400 273 16 0.

001 A 25 158 400 255 0.002 A 32 158 400 256 0.004 A 40 158 400 257 0.

020 B 90 158 400 261 0.020 B 110 158 400 262 0.

18 ijoint SPARE PARTS Nut coe GP weight Gasket coe weight A A A A A A B B B Repairing coupling gasket coe weight

Split ring coe weight A 20 158 400 244 0.003 A 25 158 400 245 0.003 A 32 158 400 246 0.004 A 40 158 400 247 0.

098 Thrust ring coe weight A 20 158 400 323 0.004 A 25 158 400 324 0.006 A 32 158 400 325 0.008 A 40 158 400 326 0.

19 Split ring coe weight A A A A A A B B B Thrust ring coe weight A A A A A A B B B

20 Inex Coe Page Coe Page Coe Page

21 Inex Coe Page Coe Page

22 Notes: 22

23 General Conitions of Supply 1. General 1.1 These general conitions shall apply to all goos supplie by Georg Fischer TPA srl to the Purchaser. They shall also apply to all future business even when no express reference is mae to them. 1.2 Any eviating or supplementary conitions, especially Purchaser s general conitions of purchase, an verbal agreements shall only be applicable if accepte in writing by Georg Fischer TPA srl. 2. Teners Teners shall only be bining if they contain a specifically state perio for accep tance. 3. Scope of elivery 3.1 Georg Fischer TPA srl s prouct range is subject to change. 3.2 The confirmation of orer shall govern the scope an execution of the contract. 4. ata an ocuments 4.1 Technical ocuments such as rawings, escriptions, illustrations an ata on imen sions, performance an weight as well as the reference to stanars are for information purposes only. They are not warrante characteristics an are subject to change. 4.2 All technical ocuments shall remain the exclusive property of Georg Fischer TPA srl an may only be use for the agree purposes or as Georg Fischer TPA srl may consent. 4.3 In the context of the contractual relation with the Purchaser personal ata may be processe. The Purchaser agrees to the isclosure of sai ata to thir parties, such as foreign subcontractors an suppliers etc. 5. ocal aws an Regulations The Purchaser shall bring to the attention of Georg Fischer TPA srl all local laws an regulations at the place of estination which bear connection with the execution of the contract an the aherence to relevant safety regulations an approval proceures. 6. Prices 6.1 Unless agree otherwise, the prices shall be eeme quote net, ex works, incluing stanar packing. All supplementary costs, such as the cost of carriage, insurance, export an import licences, etc. shall be borne by the Purchaser. The Purchaser shall also bear the costs of all taxes, fees, uties, etc. connecte with the contract. 6.2 If the costs of packing, carriage, insurance, fees an other supplementary costs are in clue in the tener price or contract price or are referre to specifically in the tener or confirmation of orer, Georg Fischer TPA srl reserve the right to revise their prices accoringly shoul any change occur in the relevant tariffs. 7. Payment 7.1 The Purchaser shall make payment in the manner agree by the parties to the George Fischer works conucting the account without any euctions such as iscounts, costs, taxes or ues. 7.2 The Purchaser may only withhol or off-set payments ue against counterclaims which are either expressly acknowlege by Georg Fischer TPA srl or finally aware to the Purchaser. In particular, payment shall still be mae when unessential items are still outstaning provie, however, that the goos alreay elivere are not renere unusable as a result. 8. Retention of Title 8.1 The goos shall remain the property of Georg Fischer TPA srl until the Purchaser shall have settle all claims, present an future, which Georg Fischer TPA srl may have against him. 8.2 Shoul the Purchaser sell goos to which title is reserve he shall then be eeme to have tacitly assigne to Georg Fischer TPA srl the procees eriving from their sale together with all collateral rights, securities an reservations of title until all claims hel by Georg Fischer TPA srl shall have been settle. 8.3 To the extent the value of the goos to which title is reserve together with collateral securities shoul excee Georg Fischer TPA srl s claims against the Purchaser by more than 20%, Georg Fischer TPA srl shall reassign the above procees to Purchaser at his request. 8.4 In case of efault on the part of the Purchaser, in particular in case of arrears, George Fischer shall be entitle to repossession of the goos after having given notice to thiseffect, an the Purchaser shall be obligate to surrener the goos. 9. elivery 9.1 The term of elivery shall commence as soon as the contract has been entere into, all official formalities such as import an payment permits have been obtaine an all essential technical points have been settle. The term of elivery shall be eeme uly observe when, upon its expiry, the goos are reay for espatch. 9.2 elivery is subject to the following conitions, i. e. the term of elivery shall be reasonably extene: a) if Georg Fischer TPA srl are not supplie in time with the information necessary for the execution of the contract or if subsequent changes causing elays are mae by the Purchaser. b) if Georg Fischer TPA srl are prevente from performing the contract by force majeure. Force majeure shall equally be eeme to be any unforseeable event beyon Georg Fischer TPA srl s control which reners Georg Fischer TPA srl s performance commercially unpractible or impossible, such as elaye or efective supplies from subcontractors, labour isputes, governmental orers or regulations, shortages in materials or energy, serious isturbances in Georg Fischer TPA srl s works, such as the total or partial estruction of plant an equipment or the breakown of essential facili-ties, serious isruptions in transport facilities, e.g. impassable roas. Shoul the effect of force majeure excee a perio of six months, either party may cancel the contract forthwith. Georg Fischer TPA srl shall not be liable for any amage or loss of any kin whatsoever resulting therefrom, any suspension or cancellation being without prejuice to Georg Fischer TPA srl s right to recover all sums ue in respect of consignments elivere an costs incurre to ate. c) if the Purchaser fails to fulfil or elays in fulfilling his obligations uner the contract, in particular if he oes not ahere to the agree conitions of payment. 9.3 If for reasons attributable to Georg Fischer TPA srl a reasonable term of elivery is exceee, Georg Fischer TPA srl shall not be eeme in efault until the Purchaser has grante to Georg Fischer TPA srl in writing a reasonable extension thereof of not less than one month which equally is not met.the Purchaser shall then be entitle to cancel the contract. 9.4 If the Purchaser fails to take elivery within a reasonable time of goos notifie as reay for espatch, Georg Fischer TPA srl shall be entitle to store the goos at the Purchaser s expense an risk an to invoice them as elivere. 9.5 Partial shipments shall be allowe an Georg Fischer TPA srl shall be entitle to invoice for such eliveries. 9.6 If Georg Fischer TPA srl o not insist on the performance of a contract cancelle by the Purchaser, a penalty of 10% of the contract price shall become ue unless Georg Fischer TPA srl can prove greater amages. 10. Packing If the goos are provie with aitional packing over an above the stanar packing, such packing shall be invoice separately an be non-returnable. 11. Passing of Risk 11.1 The risk in the goos shall pass to the Purchaser as soon as they have left Georg Fischer TPA srl s works, even if elivery is mae carriage-pai, uner similar clauses or in cluing installation or when carriage is organize an manage by Georg Fischer TPA srl If elivery is elaye for reasons beyon Georg Fischer TPA srl s control, the risk shall pass to the Purchaser when he is notifie that the goos are reay for espatch. 12. Carriage an Insurance 12.1 Unless agree otherwise, the Purchaser shall bear the cost of carriage The Purchaser shall be responsible for insurance against amage of whatever kin. Even when such insurance is arrange by Georg Fischer TPA srl it shall be eeme taken out by the orer of an for the account of the Purchaser an at his risk Special requests regaring carriage an insurance shall be communicate to Georg Fischer TPA srl in ue time. Otherwise carriage shall be arrange by Georg Fischer TPA srl attheir iscretion, but without responsibility, by the quickest an cheapest methopossible. In case of carriage-pai elivery transport arrangements shall be mae by George Fischer TPA srl. If the Purchaser specifies particular requirements, any extra costs involve shall be borne by him In the event of amage or loss of the goos uring carriage the Purchaser shall mark the elivery ocuments accoringly an immeiately have the amage ascertaine by the carrier. Not reaily ascertainable amages sustaine uring carriage shall be notifie to the carrier within six ays after receipt of the goos. 13. Inspection an Acceptance 13.1 The goos will be subject to normal inspection by Georg Fischer TPA srl uring manufacture. Aitional tests require by the Purchaser shall be agree upon in writing an shall be charge to the Purchaser It shall be a conition of Georg Fischer TPA srl s obligation uner the warranties state here-inafter that Georg Fischer TPA srl be notifie in writing by the Purchaser of any purporte efect immeiately upon iscovery. Notice concerning weight, numbers or apparent efects is to be given latest within 30 ays from receipt of the goos, notice of other efects latest within the agree warranty perio. 14. Warranty 14.1 At the written request of the Purchaser, Georg Fischer TPA srl unertake to repair or replace, at their iscretion, as quickly as possible an free of charge all goos supplie which emonstrably suffer from faulty esign, materials or workmanship or from faulty oper ating or installation instructions. Replace parts shall become property of Georg Fischer TPA srl The Purchaser shall be entitle to cancel the contract or to eman a reuction in the contract price if: - repair or replacement is impossible, or - Georg Fischer TPA srl are unable or refuse to remey the efect or replace the efectivegoos within a reasonable perio of time or are unuly elaying such remey or replacement For goos which are manufacture to specifications, rawings or patterns supplie by the Purchaser, Georg Fischer TPA srl s warranty shall be restricte to proper materials an workmanship This warranty shall not apply to amage resulting from normal wear, improper storage an maintenance, failure to observe the operating instructions, overstressing or overloaing, unsuitable operating meia, improper repairs or alterations by the Purchaser or thir parties, the use of non-genuine parts an other reasons beyon Georg Fischer TPA srl s control For goos or essential components manufacture by a thir party an supplie by Georg Fischer TPA srl uner this contract, Georg Fischer TPA srl s warranty is limite to the warranty provie by sai thir party No action or claim may be brought by the Purchaser on account of any allege breach of warranty or any other obligation of Georg Fischer TPA srl after the expiration of twelve (12) months from receipt of the goos by the en user or at the latest within eighteen (18) months of the goos being espatche by Georg Fischer TPA srl. 15. imitation of iability The warranties set forth above are expressly in lieu of any express warranty of any kin an in lieu of any implie warranty, incluing any warranty of merchantability or fitness for a particular purpose. Georg Fischer TPA srl shall not be liable for any inciental special or consequential amages, such as loss of profits, loss of prouction, loss of use or loss of contract, arising for any reason, incluing amages resulting from elaye elivery, efective esign, materials or workmanship or from faulty instructions an whether such amages are claime to arise from breach of con-tract, in tort, the theory of prouct liability or otherwise; reservation is solely being mae for Georg Fischer TPA srl s statutory liability ue to material breach of an essential contractual obligation, express representations, wrongful intent, gross negligence or prouct liability acts. 16. Place of Performance an Jurisiction 16.1 Place of performance for the goos shall be the Georg Fischer TPA srl works from which the goos are espatche Any civil action base upon any allege breach of this contract shall be file an prosecute exclusively in the courts having jurisiction over the Georg Fischer TPA srl works invoicing the goos. Georg Fischer TPA srl however reserves the right to file actions in any court having juristiction over controversies arising out of or in connection with the present contract The contract shall be governe by the law applicable at the place of business of the Georg Fischer TPA srl works invoicing the goos in question. 23

24 GF Piping Systems Worlwie at home Our sales companies an representatives ensure local customer support in over 100 countries Argentina / Southern South America Georg Fischer Central Plastics Suamérica S.R.. Buenos Aires, Argentina Phone gfcentral.ps.ar@georgfischer.com Australia George Fischer Pty t Riverwoo NSW 2210 Australia Phone +61 (0) australia.ps@georgfischer.com Austria Georg Fischer Rohrleitungssysteme GmbH 3130 Herzogenburg Phone +43 (0) austria.ps@georgfischer.com Georg Fischer Fittings GmbH 3160 Traisen Phone +43 (0) fittings.ps@georgfischer.com Belgium / uxembourg Georg Fischer NV/SA 1070 Bruxelles/Brüssel Phone +32 (0) be.ps@georgfischer.com Brazil Georg Fischer Sist. e Tub. ta São Paulo Phone +55 (0) br.ps@georgfischer.com Canaa Georg Fischer Piping Systems t Mississauga, ON 5T 2B2 Phone +1 (905) Fax +1 (905) ca.ps@georgfischer.com China Georg Fischer Piping Systems t Shanghai Phone china.ps@georgfischer.com Chinaust Plastics Corp. t. Songlinian, Zhuozhou city, Hebei province, China, Phone Fax chinaust@chinaust.com enmark / Icelan Georg Fischer A/S 2630 Taastrup Phone +45 (0) info.k.ps@georgfischer.com Finlan Georg Fischer AB VANTAA Phone +358 (0) Fax +358 (0) info.fi.ps@georgfischer.com France Georg Fischer SAS Roissy Charles e Gaulle Ceex Phone +33 (0) fr.ps@georgfischer.com Germany Georg Fischer GmbH Albershausen Phone +49 (0) info.e.ps@georgfischer.com Inia Georg Fischer Piping Systems t Mumbai Phone branchoffice@georgfischer.com Italy Georg Fischer S.p.A Cernusco S/N (MI) Phone it.ps@georgfischer.com Georg Fischer TPA S.r.l. IT Busalla (GE) Phone tpa.ps@georgfischer.com Japan Georg Fischer t Osaka, Phone +81 (0) jp.ps@georgfischer.com Korea Georg Fischer Piping Systems Seohyeon-ong Bunang-gu Seongnam-si, Gyeonggi-o Seoul Phone Fax kor.ps@georgfischer.com Malaysia George Fischer (M) Sn. Bh Shah Alam, Selangor arul Ehsan Phone +60 (0) my.ps@georgfischer.com Mexico / Northern atin America Georg Fischer S.A. e C.V. Apoaca, Nuevo eon CP66636 Mexico Phone +52 (81) Fax +52 (81) mx.ps@georgfischer.com Mile East Georg Fischer Piping Systems (Switzerlan) t ubai, Unite Arab Emirates Phone gss.ps@georgfischer.com Netherlans Georg Fischer N.V PA Epe Phone +31 (0) nl.ps@georgfischer.com Georg Fischer Waga N.V. N-8160 AG Epe Phone +31 (0) waga.ps@georgfischer.com New Zealan Georg Fischer t 13 Jupiter Grove, Upper Hutt 5018 PO Box 40399, Upper Hutt 5140 Phone +64 (0) nz.ps@georgfischer.com Norway Georg Fischer AS 1351 Ru Phone no.ps@georgfischer.com Polan Georg Fischer Sp. z o.o Sekocin Nowy Phone +48 (0) polan.ps@georgfischer.com Romania Georg Fischer Piping Systems (Switzerlan) t Bucharest - Sector 2 Phone +40 (0) ro.ps@georgfischer.com Russia Georg Fischer Piping Systems (Switzerlan) t Moscow Phone ru.ps@georgfischer.com Singapore George Fischer Pte t 11 Tampines Street 92, #04-01/ Singapore Phone sgp.ps@georgfischer.com Spain / Portugal Georg Fischer S.A Mari Phone +34 (0) es.ps@georgfischer.com Sween Georg Fischer AB Stockholm Phone +46 (0) info.se.ps@georgfischer.com Switzerlan Georg Fischer Rohrleitungssysteme (Schweiz) AG 8201 Schaffhausen Phone +41 (0) ch.ps@georgfischer.com Taiwan Georg Fischer Co., t San Chung ist., New Taipei City Phone Fax Unite Kingom / Irelan George Fischer Sales imite Coventry, CV2 2ST Phone +44 (0) uk.ps@georgfischer.com USA /Caribbean Georg Fischer C Tustin, CA Phone +1 (714) Toll Free 800/ us.ps@georgfischer.com Georg Fischer Central Plastics C Shawnee, OK Phone +1 (405) gfcentral.ps@georgfischer.com Vietnam George Fischer Pte t 136E Tran Vu, Ba inh istrict, Hanoi Phone Fax International Georg Fischer Piping Systems (Switzerlan) t 8201 Schaffhausen/Switzerlan Phone +41 (0) Fax +41 (0) info.export@georgfischer.com The technical ata are not bining. They neither constitute expressly warrante characteristics nor guarantee properties nor a guarantee urability. They are subject to moification. Our General Terms of Sale apply GFO_6227_4a (03.14) Georg Fischer Piping Systems t CH-8201 Schaffhausen/Switzerlan, 2013 Printe in Switzerlan

Relaxed under pressure

GF Piping Systems Relaxed under pressure Pressure Reducing Valve Type 582 Pressure Retaining Valve Type 586 Rethinking what a PRV can be Introducing our pressure regulating valves with a completely re-engineered