The revolution for efficient cooling

Size: px

Start display at page:

Download "The revolution for efficient cooling"

Joshua Long
6 years ago
Views:

1 GF Piping Systems COO-FIT 2.0 The revolution for efficient cooling

transfer rate at the air cooler an the efficiency of the chille water piping system.

2 COO-FIT 2.0 Your solution for chille water The efficiency of a cooling plant is efine by the system s Coefficient of Performance (COP), the heat transfer rate at the air cooler an the efficiency of the chille water piping system. As a contribution to the worlwie initiative to reuce CO 2 emissions an their environmental impact, GF Piping Systems brings a revolution to efficient cooling. Angle marking Sealing lip Insulation Weling inicators GF HE insulation EGEF electrofusion fitting integrate Robust jacket Insulation plug PE100 carrier pipe 2

3 The COO-FIT 2.0 PE100 pipes an fittings are insulate with 22 mm of high energy efficient (HE) foam an protecte with a robust jacket. COO-FIT 2.0 is the corrosion an conensation free solution for the transport of chille water insie resiential an commercial builings as well as ata centers an for process cooling. The smooth inner surface of the PE100 pipe provies a minimum pressure loss while the low thermal conuctivity of the insulation ensures reuce energy loss an running costs for a life time. The 3-in-1 construction keeps installation time to a minimum. 50% faster installation 30% better energy efficiency 100% corrosion free Take avantage of these benefits Builing owners General contractors an installers Minimize energy loss Top quality insulation thickness an ensity throughout the entire system. ight weight Ieal for retrofitting of prestigious builings 30% less weight than traitional metal systems. Har external jacket Vapour an moisture tight construction, mechanically loaable. ow CO 2 footprint CFC free an recyclable. Zero ODP. Buil more in less time 3-in-1: pipe, insulation an jacket in one step. Reliable easy jointing No hot works for the electrofusion jointing process. Simple installation The har external jacket allows for simple, easy assembly with stanar brackets. ight weight an easy to hanle Up to 110 mm no nee for lifts or special evices to hanle on-site. Off-site pre-fabrication Reuce on-site labor time. Planners an consultants Easy an accurate planning Planning funamentals, CAD library, BIM compatible. Complete compatible system clearly efine interfaces Insulate pipes, fittings, valves, clearly efine interfaces, flexible hoses one system, one team, one proucer. A system for life Corrosion an conensation free, moisture an vapour tight, low pressure loss an energy efficient. State-of-the-art jointing technology Machine controlle quality. 3

Application areas 1 2 10 3 Cooling system within the water cycle Moern cities are constantly growing an changing. This increases the expectations of efficiency an performance of all types of evices.

4 Application areas Cooling system within the water cycle Moern cities are constantly growing an changing. This increases the expectations of efficiency an performance of all types of evices. Their use raises enormous amounts of heat increasing the nee for air conitioning. Air conitioning also plays an important role in everyay life, as the ambient temperature affects people s well-being an prouctivity - whether at work or uring leisure time, at home or traveling. GF Piping Systems offers its unique an extensive COO-FIT range for all types of cooling requirements. The COO-FIT ABS Plus an COO-FIT PE Plus portfolio for inustrial cooling is now complemente with the new COO-FIT 2.0 for col water applications. 4

8 4 5 6 7 9 1) Airport 2) Office builing 3) Data center 4) Hospital 5) Hotel 6) Apartment 7)

5 ) Airport 2) Office builing 3) Data center 4) Hospital 5) Hotel 6) Apartment 7) Shopping center 8) Sports center / leisure center 9) University 10) Bank / public institutions 5

6 Air conitioning Comfort cooling Apartments an office builings, hotels, universities an schools, banks, shopping centers, airports, cinemas an theaters, sports an event facilities. Air conitioning improves the quality of life both at work, at home an at leisure venues. The reay-to-install COO-FIT 2.0 is a revolution for efficient cooling

1 2 Connection to fan coils Pre-fabricate insulate hoses

Risers Post-insulation in vertical service channels is

Insulate valves Pre-insulate hoses Pre-insulate

Reuce branches Pre-insulate reuce tees Pre-insulate

systems Fire wall penetrations Safe pipe wall penetrations

Prove an certifie solution for COO-FIT 2.

7 1 2 Connection to fan coils Pre-fabricate insulate hoses to the transition union prevent corrosion. Risers Post-insulation in vertical service channels is timeconsuming an ifficult. Insulate valves Pre-insulate hoses Pre-insulate transitions Pre-insulate pipes in large imensions 3 4 Reuce branches Pre-insulate reuce tees Pre-insulate transition fittings: ecofit, ifit an traitional metal systems Fire wall penetrations Safe pipe wall penetrations with trie an teste existing proucts. Prove an certifie solution for COO-FIT Emergency exits Shoul the pipe system enter an emergency exit, pipe with A2 class insulation is available as stanar. Certifie mineral wool solutions Certifie brackets 7

0 is the safe piping solution for an effective an efficient esign, supply, installation an management of

8 Data centers Safe cooling On average, 70% of ata center power is converte into heat, as announce at the annual Green Data Center Conference*. COO-FIT 2.0 is the safe piping solution for an effective an efficient esign, supply, installation an management of the cooling systems of a ata center. The reay-to-install COO-FIT 2.0 is a revolution for efficient cooling * Statement at the Green Data Center Conference,

1 2 Connection to cooling towers Many types of transitions

Pre-insulate transitions to metal threae systems an stanar

panels Pre-insulate valves for iniviual circuit control

traceability 4 Highly frequente areas When a lower burning

Electrofusion Helps to avoi installer errors. COO-FIT 2.

9 1 2 Connection to cooling towers Many types of transitions enable the connection to ajoining systems. Pre-insulate transitions to metal threae systems an stanar flanges 3 Rack cooling Simple pre-insulate connection to all computer racks. Pre-insulate hoses provie simple connection to cooling back panels Pre-insulate valves for iniviual circuit control Pre-insulate transitions Machine guie weling process with traceability 4 Highly frequente areas When a lower burning loa or metallic finishing is require. Electrofusion Helps to avoi installer errors. COO-FIT 2.0 M with metal jacket provies increase fire classification Certifie brackets Metal jacket for aesthetics Machine controlle fusion process with traceability 9

10 System overview More than a system All COO-FIT 2.0 items are pre-insulate. Proucts which nee to be maintaine, such as valves, are elivere with removable insulation. COO-FIT mm 32 mm 40 mm 50 mm 63 mm 75 mm 90 mm 110 mm 140 mm Pipes PN16 Couplers Elbows 90 / 45 T-90 equal T-90 reuce Reucers Flexible hoses Ball valves Butterfly valves Transition fittings Fixe points COO-FIT 2.0 M Pipes Couplers Elbows 90 T90 equal Tools Tools Fusion machine Compatible systems ecofit PE100 ifit 10

11 Material properties Materials* Meia pipe PE100 Insulation Outer jacket GF HE foam, CFC free, close cell Pipe: HDPE, fitting: GF HE Foam Dimensions Jointing technology Pressure rating (DN25 - DN125) Electrofusion weling 16 bar, SDR11 Insulation Thermal conuctivity λ at 20 C W/mK Density 55 kg/m 3 Foam cell size Thickness (Nominal) max. ø 0.5 mm 22 mm Temperature Meium 0 C to +60 C Weight Pipe kg/m (without liqui) Pipe kg/m Environment Resistance Water an vapour-tight Stanars Ozone epleting potential EN ISO ISO 7 EN ISO 16135, EN ISO Zero Plastic piping systems for inustrial applications - Metric series Threae joints Inustrial valves * All three materials are permanently jointe to each other. Pressure / temperature Meium: water Minimum esign life-span 25 years P (bar) T ( F) C=1.6 COO-FIT T ( C) P Meium pressure (bar, psi) T Meium temperature ( C, F) C Safety factor P (psi) P (bar) T ( F) C=1.6 COO-FIT T ( C) P (psi) 11

It oes not have a material expansion-/contraction factor as for stanar pipes. Assumption Ambient temperature: 25 C constant Internal temp.

12 Planning funamentals COO-FIT 2.0 Definition of flexible sections COO-FIT 2.0 Expansion / contraction The expansion an contraction of pipes is epenent on the cooling flui temperature, the ambient temperature an the change of both temperatures in an application. It oes not have a material expansion-/contraction factor as for stanar pipes. Assumption Ambient temperature: 25 C constant Internal temp. of pipe at installation: 25 C Assembly situation: Inoor ength changes Δ in [mm] at 20 C liqui temp. [m] mm mm mm mm mm mm mm mm Use the COO-FIT Calculation Tool to etermine etaile, application specific values. ength changes Δ in [mm] at 15 C liqui temp. [m] mm mm mm mm mm mm mm mm ength changes Δ in [mm] at 10 C liqui temp. [m] mm mm mm mm mm mm mm mm ength changes Δ in [mm] at 5 C liqui temp. [m] mm mm mm mm mm mm mm mm Flexible sections B in [cm] Δ [mm]

Pipe bracket istances bracket istance 32 40 50 63 75 90 110 140 Bracket istance (m) COO-FIT 2.0 1.6 1.7 1.7 1.85 1.95 2.0 2.1 2.35 Values are vali inepenent of the ambient temperature.

13 Pipe bracket istances bracket istance Bracket istance (m) COO-FIT Values are vali inepenent of the ambient temperature. COO-FIT Calculation Tool The GF Piping Systems Cooling Calculation Tool is use to support in the imensioning an esign of cooling systems. The Cooling Calculation Tool hanles: Expansion, contraction Flexible section esign Energy savings Pipe exterior temperature Pipe imensioning Pressure loss Dew point/ insulation thickness Pipe bracket spacing Freezing time Weight comparison CO₂ footprint 13

14 Planning funamentals COO-FIT 2.0 Fire classes COO-FIT 2.0 COO-FIT 2.0 M COO-FIT 2.0/Mineral Wool 2) EN E B s1 0 A2 VKF RF3 cr RF2 RF1 BS 5422:2009 1) National Class 3 National Class 0 National Class 0 1) Test metho accoring to BS an BS ) Type: Rockwool 800 Firewall penetrations Chemical resistance to cooling agents COO-FIT 2.0 can be use with various types of cooling agents, such as: Water Organic salt solutions Inorganic salt solutions Water-Glycol mixtures up to 50% Ice slurry COO-FIT 2.0 pipes are teste an certifie with ROKU System AWM II of ROF KUHN GmbH. They withstan the impact of fire, minimum at 120 minutes accoring to the DIN EN testing proceure. Refer to the GF Planning Funamentals for more etaile information. 14

Jointing technology The easy connection The state-of-the-art electrofusion technology is perfect for on-site jointing.

The installer only nees to connect the leas to the fitting, scan the bar coe an leave the fusion process to the machine.

Depening on the ambient temperature, the fusion time is automatically ajuste for the correct supply of energy.

In case of anomalies, like inaequate input current or fitting wires fault, the machine stops immeiately an informs the operator with a specific error message.

Risks to the surrounings cause by open flames simply o not exist.

15 Jointing technology The easy connection The state-of-the-art electrofusion technology is perfect for on-site jointing. Electrofusion with GF Piping Systems Electrofusion is a safe an reliable way to joint plastic piping systems. The installer only nees to connect the leas to the fitting, scan the bar coe an leave the fusion process to the machine. The electrofusion fittings are equippe with integrate resistance wires, which are supplie with electricity uring the fusion process. Depening on the ambient temperature, the fusion time is automatically ajuste for the correct supply of energy. A soft start is applie to minimise the loa on the power generator an fusion is carrie out to completion. In case of anomalies, like inaequate input current or fitting wires fault, the machine stops immeiately an informs the operator with a specific error message. MSA electro fusion evice The MSA fusion evices can wel COO-FIT 2.0 electrofusion fittings up to three times faster than wele steel joints. Risks to the surrounings cause by open flames simply o not exist. Fittings recognition through bar coe scanning ensures the quality of the joint an ue to recore fusion parameters a high level of quality assurance is provie. Its low weight of less than 12 kg allows simple hanling. Foam removal tool COO-FIT 2.0 pipes are supplie with free ens (noninsulate), reay for assembling an fusion with fittings. If a pipe nees to be cut to the esire length, the foam removal tool helps to remove the foam an outer jacket ust-free an in less than two minutes. At the same time it peels the surface of the meia pipe in orer to prepare it perfectly for the subsequent fusion process. Pipe installation clamps During the fusion process forces occur, causing the pipe to move out of the fitting. GF recommens to fix the assembly with COO-FIT 2.0 installation clamps. They restrain the movement of the pipes an keep their alignment. Their reuce weights (less than 6kg) as well as their compact esign allow easy overhea assemblies, even in narrow conitions. 15

0 pipes fittings an valves is very easy.

Piping Systems MSA fusion evices ensure the

1 2 The GF foam removal tool helps to remove the

Clean pipe an fitting, then simply push pipe an

3 4 Use the pipe installation clamps in orer to

16 Installation Insert Clamp Wel Done! The jointing of COO-FIT 2.0 pipes fittings an valves is very easy. The proceure takes just a few minutes an the GF Piping Systems MSA fusion evices ensure the quality of the joints. 1 2 The GF foam removal tool helps to remove the foam an peel the pipe efficiently. Clean pipe an fitting, then simply push pipe an fitting together. 3 4 Use the pipe installation clamps in orer to avoi tensions uring installation. MSA weling evices ensure high quality jointings. 5 6 Check the system with a pressure test. Seal the weling connectors with the attache insulation plugs - one! 16

17 Sustainability Environmental efficiency The use of COO-FIT 2.0 has significant avantages compare to traitional post-insulate metal systems, particularly when it comes to CO₂ emissions or energy loss. CO₂ emissions [kg] A three story builing with e.g. 123 offices woul nee a piping system of nearly 3000 metres for chille water for the air conitioning. The use of copper for the piping system equates to 17,5 tons of CO 2 equivalent, which woul be reuce to nearly 5 tons by using COO-FIT 2.0. This saving is equivalent to a km journey with an average car COO-FIT 2.0 Copper Carbon Steel Stainless Steel 12,5 tons CO 2 save Total energy loss [kw] Analyzing the energy loss on this same installation, COO-FIT 2.0 is on average 35% more efficient compare to metal piping systems post-insulate with rubber base foam COO-FIT 2.0 Copper Carbon Steel Stainless Steel Post-insulate with rubber base foam 1 1 ife Cycle Analysis, conucte by the company ESU-services GmbH, Uster/ Switzerlan ( on behalf of Georg Fischer Piping Systems in Report available on (Pioneering Green Solutions, GF Piping Systems) 17

The best choice for you Corrosion an chemical resistant system solutions Georg Fischer Georg Fischer focuses on three core businesses: GF Piping Systems, GF Automotive an GF Machining Solutions.

18 The best choice for you Corrosion an chemical resistant system solutions Georg Fischer Georg Fischer focuses on three core businesses: GF Piping Systems, GF Automotive an GF Machining Solutions. The inustrial corporation, foune in 1802, heaquarters in Switzerlan an operates approximately 120 companies with more than employees in 32 countries. GF Piping Systems is a leaing supplier of plastic an metal piping systems with global market presence. We offer corresponing pipes, fittings, valves, automation proucts an jointing technology for the treatment of water an chemicals, as well as for the safe istribution of liquis an gases. Our market segments Being a strong implementation partner, GF Piping Systems supports its customers in every phase of the project. No matter which processes an applications are planne in the following market segments: Automation Builing Technology Chemical Process Inustry Energy Foo an Beverage / Cooling Microelectronics Marine Water an Gas Utilities Water Treatment Global presence Our global presence ensures customer proximity worlwie. Sales companies in 26 countries an representatives in another 80 countries provie customer service aroun the clock. With 32 prouction sites in Europe, Asia an the USA we are close to our customers an comply with local stanars. A moern logistics concept with local istribution centers ensures highest prouct availability an short elivery times. GF Piping Systems specialists are always close by. Complete solutions provier Our extensive prouct range represents a unique form of prouct an competence bunling. With over proucts, allie with a broa range of services, we offer iniviual an comprehensive system solutions for a variety of inustrial applications. Having the profitability of the projects of our customers in focus, we optimize processes an applications that are integrate into the whole system. Continually setting stanars in the market, we irectly provie our customers with technological avantages. Due to our worlwie network customers benefit irectly from our 50 years+ experience in plastics. From start to finish, we support our customers as a competent, reliable an experience partner. 18

19 GF Piping Systems COO-FIT 2.0 Prouct range 19

20 Prouct range COO-FIT 2.0 COO-FIT 2.0 Pipes COO-FIT 2.0 Pipe Pre-insulate PE100 SDR11, metric Insulation mae from GF HE foam Impact resistant. Color: black With free en for electrofusion /D DN PN (bar) (kg m) i 1 closest inch 32/ / / / / / / /

21 Prouct range COO-FIT 2.0 Fittings COO-FIT 2.0 Coupler Pre-insulate PE100 SDR11, metric Insulation mae from GF HE foam Impact resistant. Color: black Integrate sealing lip, for a moisture-proof an vapour tight sealing /D PN (bar) 1 z closest inch 32/ / / / / / / / COO-FIT 2.0 Elbow 90 Pre-insulate PE100 SDR11, metric Insulation mae from GF HE foam Impact resistant. Color: black A: Electrofusion Fitting with integrate sealing lip, for a moisture-proof an vapour tight sealing B: Spigot Fitting with free en (separate electrofusion fitting neee for joining) /D PN (bar) 1 z closest inch Type 32/ A 40/ A 50/ A 63/ A 75/ A 90/ A 110/ A 140/ B 21

22 Prouct range COO-FIT 2.0 Elbow 45 Pre-insulate PE100 SDR11, metric Insulation mae from GF HE foam Impact resistant. Color: black A: Electrofusion Fitting with integrate sealing lip, for a moisture-proof an vapour tight sealing B: Spigot Fitting with free en (separate electrofusion fitting neee for joining) /D PN (bar) 1 z closest inch Type 32/ A 40/ A 50/ A 63/ A 75/ A 90/ A 110/ A 140/ B 22

23 Prouct range COO-FIT 2.0 Tee 90 equal Pre-insulate PE100 SDR11, metric Insulation mae from GF HE foam Impact resistant. Color: black A: Electrofusion Fitting with integrate sealing lip, for a moisture-proof an vapour tight sealing B: Spigot Fitting with free en (separate electrofusion fitting neee for joining) /D PN (bar) 1 z z1 closest inch Type 32/ A 40/ A 50/ A 63/ A 75/ A 90/ A 110/ A 140/ B 23

24 Prouct range COO-FIT 2.0 Tee 90 reuce Pre-insulate PE100 SDR11, metric Insulation mae from GF HE foam Impact resistant. Color: black A: Electrofusion Fitting with integrate sealing lip, for a moisture-proof an vapour tight sealing. Branch with free pipe en. B: Spigot Fitting with free en (separate electrofusion fitting neee for joining) /D 1/D1 PN (bar) 1 2 z z1 Closest inch 75/125 63/ A 90/140 63/ A 90/140 75/ A 110/160 63/ A 110/160 75/ A 110/160 90/ A 140/200 63/ B 140/200 75/ B 140/200 90/ B 140/ / B Type 24

25 Prouct range COO-FIT 2.0 Reucer Pre-insulate PE100 SDR11, metric Insulation mae from GF HE foam Impact resistant. Color: black A: Electrofusion Fitting with integrate sealing lip, for a moisture-proof an vapour tight sealing B: Spigot Fitting with free en (separate electrofusion fitting neee for joining) /D 1/D1 PN (bar) 1 2 z Closest inch Type 40/90 32/ A 50/90 32/ A 50/90 40/ A 63/110 32/ A 63/110 40/ A 63/110 50/ A 90/140 63/ A 110/160 90/ A 75/125 63/ B 90/140 63/ B 90/140 75/ B 110/160 63/ B 110/160 75/ B 110/160 90/ B 140/200 63/ B 140/200 75/ B 140/200 90/ B 140/ / B 25

Prouct range COO-FIT 2.0 Installation fitting type 313 Pre-insulate PE100 SDR11, metric Insulation mae from GF HE foam Impact resistant. Color: black With threae branch for sensors (i.

26 Prouct range COO-FIT 2.0 Installation fitting type 313 Pre-insulate PE100 SDR11, metric Insulation mae from GF HE foam Impact resistant. Color: black With threae branch for sensors (i.e temperature, pressure) A: Electrofusion Fitting with integrate sealing lip, for a moisture-proof an vapour tight sealing B: Spigot Fitting with free en (separate electrofusion fitting neee for joining) /D Rp PN (bar) 1 z H Closest inch Type 32/ A 40/ A 40/ A 50/ A 50/ A 63/ A 63/ A 75/ A 75/ A 90/ A 90/ A 110/ A 110/ A 140/ B 140/ B 26

27 Prouct range COO-FIT 2.0 Transition Fittings COO-FIT 2.0 Aaptor fitting PE/stainless steel with male threa R Spigot fitting PE100 SDR11, metric with free en Stainless steel / 316 with male threa R Gasket: O-ring EPDM Incluing Insulation mae from NBR foam R PN (bar) D 1 z COO-FIT 2.0 Aaptor fitting PE/stainless steel with female threa Rp Spigot fitting PE100 SDR11, metric with free en Stainless steel / 316 with femal threa Rp Gasket: O-ring EPDM Incluing Insulation mae from NBR foam Rp PN (bar) D 1 z

28 Prouct range COO-FIT 2.0 Aaptor fitting PE/stainless steel with loose union nut G Spigot fitting PE100 SDR11, metric with free en Stainless steel / 316 with female threa G Incluing flat seal EPDM Incluing Insulation mae from NBR foam G PN D 1 z COO-FIT 2.0 Aaptor fitting PE/Brass with male threa R Spigot fitting PE100 SDR11, metric with free en Brass CuZn40Pb2 with male threa R Gasket: O-ring EPDM Incluing Insulation mae from NBR foam R PN D 1 z

29 Prouct range COO-FIT 2.0 Aaptor fitting PE/Brass with female threa Rp Spigot fitting PE100 SDR11, metric with free en Brass CuZn40Pb2 with female trea Rp Gasket: O-ring EPDM Incluing Insulation mae from NBR foam Rp PN (bar) D 1 z COO-FIT 2.0 Aaptor fitting PE/Brass with loose union nut G Spigot fitting PE100 SDR11, metric with free en Brass CuZn40Pb2 with female threa G Incluing flat seal EPDM Incluing Insulation mae from NBR foam G PN D 1 z

Prouct range COO-FIT 2.0 Aaptor Union PE/Stainless steel with male threa R Union bush: Spigot fitting PE100 SDR11, metric with free en Union En: Stainless steel 1.

30 Prouct range COO-FIT 2.0 Aaptor Union PE/Stainless steel with male threa R Union bush: Spigot fitting PE100 SDR11, metric with free en Union En: Stainless steel / 316 with male threa R Gasket: O-ring EPDM No Union Nut: PEGF25 Incluing Insulation mae from NBR foam R PN D 1 z1 z COO-FIT 2.0 Aaptor Union PE/Stainless steel with female threa Rp Union bush: Spigot fitting PE100 SDR11, metric with free en Union En: Stainless steel / 316 with female threa Rp Gasket: O-ring EPDM No Union Nut: PEGF25 Incluing Insulation mae from NBR foam Rp PN D 1 2 z1 z

Prouct range COO-FIT 2.0 Union PE/PE Union bush: Spigot fitting PE100 SDR11, metric with free en Union En: Spigot fitting PE100 SDR11, metric with free en Gasket: O-ring EPDM No.

63 16 738 514 611 139 268 48 136 132 75 16 738 514 612 151 303 55 154 149 90 16 738 514 613 166 293 62 149 144 110 16 738 514 614 186 321 72 162 159 COO-FIT 2.

31 Prouct range COO-FIT 2.0 Union PE/PE Union bush: Spigot fitting PE100 SDR11, metric with free en Union En: Spigot fitting PE100 SDR11, metric with free en Gasket: O-ring EPDM No Union Nut: PEGF25 Incluing Insulation mae from NBR foam PN Coe D 1 z1 z COO-FIT 2.0 Aaptor Union PE/ABS Union bush: ABS Solvent cement socket Union En: Spigot fitting PE100 SDR11, metric with free en Gasket: O-ring EPDM No Union Nut: ABS Incluing Insulation mae from NBR foam PN D 1 2 z1 z

32 Prouct range 32

33 Prouct range COO-FIT 2.0 Flexible Hoses COO-FIT 2.0 Flexible hose, EPDM with stainless steel aaptors an male/female threas G Pre-insulate EPDM Insulation mae from NBR foam Outer jacket impact resistant an tearproof With loose union nut G on one en an male threa GA on the other DN G/GA PN (bar) Coe i D1 D2 1 2 z1 z2 r closest inch 20 3/4" " /4" /2"

34 Prouct range COO-FIT 2.0 Valves COO-FIT 2.0 Ball valve type 546 han-operate Material: PVC-U with spigot PE100 SDR11, metric Ball seals PTFE Integrate stainless steel mounting inserts Incluing insulation half shells PN kv-value (p=1bar) DN D D1 D H H1 H2 z z1 z M M M M M M8 M Closest inch

35 Prouct range COO-FIT 2.0 Butterfly valve kit type 567 han-operate Material: PVC-U with spigot PE100 SDR11, metric Incluing flange aaptors, backing flanges PP-Steel, bolts an insulation half shells DN PN kv-value (p=1bar) EPDM Coe Weight DN D D1 D z z1 z2 H H1 H2 H DN closest inch

36 Prouct range COO-FIT 2.0 Ball valve type 546 PVC-U bare shaft Material: PVC-U with spigot PE100 SDR11, metric Ball seals PTFE Integrate stainless steel mounting inserts Interface accoring to DIN/ISO 5211 Incluing insulation half shells DN PN kv-value (p=1bar) EPDM Coe Weight DN D D1 D2 1 H H1 H2 H3 z z1 z M M M M M M8 M DN Closest inch Hole pattern F05/F F05/F F05/F F05/F F F07 36

37 Prouct range COO-FIT 2.0 Butterfly valve kit type 567 bare shaft Material: PVC-U with spigot PE100 SDR11, metric Interface F07 accoring to DIN/ISO 5211 Incluing flange aaptors, backing flanges PP-Steel, bolts an insulation half shells DN PN EPDM Coe DN D D1 D2 1 3 z z1 z2 H1 H2 H3 closest inch

38 Prouct range COO-FIT 2.0 Accessories COO-FIT 2.0/4.0 Barrel nipple PE100, SDR11, metric For the shortest possible connection between fittings PN z closest inch COO-FIT 2.0 ahesive ring Double sie, for sealing connections of fittings with barrel nipple D , 40, , 50, , , , COO-FIT 2.0 Insulation for weling inicator Sales unit: Bag with 20 pieces

39 Prouct range COO-FIT 2.0 fixe point The prouct consists of two components namely a weling ban an a pipe bracket. Electro-fusion wele ban as permanent connection to transmit the forces that occur in the pipe to the fixe point. The elivere pipe brackets are neee to eliver weling pressure uring installtion an give stability uring operation. For weling, use an MSA2.x, MSA4.x, MSA 250, 300, 350, 400 or commercially available 220 V fusion machines. If you use an MSA fusion machine from GF Piping Systems, use the aapter or the y-cable set. Please take note of the maximum allowe forces for this version in the table below. Fixe point brackets an cross braces have to be calculate an obtaine by the installer. They are not inclue in the fixe point set from GF. D H max. Force (kn) closest inch / ¼ / 1 ½ / Aaptor MSA electrofusion aaptor for COO-FIT Fixe point COO-FIT Y cables kit The COO-FIT Y cables are use to spee up the installation of the Fixe Points Electro-Fusion Tapes. The Y cables allow the weling in parallel of 2 E-Tapes, halving the total uration of the fusion process. Compatible with all MSA Units Type 4 leas cable with 2mm plugs in output COO-FIT 2.0/4.0 Ahesive cement For the jointing of NBR foam insulations of flexible hoses an transition fittings

40 Prouct range COO-FIT 2.0/4.0 Ahesive tape For the jointing of NBR foam insulations of flexible hoses an transition fittings 20m on a roll Tangit KS Cleaner Special cleaner for plastic fusion connections in the material of PP, PE, PVDF an PB Suitable for Tangit Rapi. Must not be use for solvent cementing DVGW approve DW 5290 BR 0464 Size 1 liter

41 Prouct range COO-FIT 2.0M COO-FIT 2.0M Pipes COO-FIT 2.0M Pipe Pre-insulate PE100 SDR11, metric Insulation mae from PIR Outer jacket metal for increase fire classification /D DN PN (bar) (kg m) i closest inch 32/ / / / / / /

42 Prouct range COO-FIT 2.0M Fittings COO-FIT 2.0M Coupler Pre-insulate PE100 SDR11, metric Insulation mae from GF HE foam Integrate sealing lip for a water an steam tight sealing Incluing metal half shells an clamps for increase fire classfication /D PN (bar) D1 1 z 2 H closest inch 32/ / / / / / /

43 Prouct range COO-FIT 2.0M Elbow 90 Pre-insulate PE100 SDR11, metric Insulation mae from GF HE foam Integrate sealing lip for a water an steam tight sealing Incluing metal half shells an clamps for increase fire classfication /D PN (bar) D1 1 2 z H closest inch 32/ / / / / / /

44 Prouct range COO-FIT 2.0M Tee 90 equal Pre-insulate PE100 SDR11, metric Insulation mae from GF HE foam Integrate sealing lip for a water an steam tight sealing Incluing metal half shells an clamps for increase fire classfication /D PN (bar) 32/ / / / / / / /D D1 1 3 z z1 2 H closest inch 32/ / / / / / /

Prouct range COO-FIT 2.0/2.0M Tools COO-FIT 2.0/4.0 Foam removal an peeling tool Tool for foam removal an peeling of COO-FIT 2.0 an 4.0 pipes 32-90 799 738 001 10.500 110-225 799 738 002 16.500 MSA 2.

45 Prouct range COO-FIT 2.0/2.0M Tools COO-FIT 2.0/4.0 Foam removal an peeling tool Tool for foam removal an peeling of COO-FIT 2.0 an 4.0 pipes MSA 2.1 Automatic Electrofusion Unit with protocols retrieval The MSA 2.1 automatic electro fusion unit combines light weight an high efficiency, thanks to its inverter technology an furthermore provies fusion ocumentation in PDF. The unit is extremely fast an simple, with three basic operations require to operator: connect, scan, start the fusion. It is robust, safe an ergonomic. All is meant to simplify the job: the barcoe scanner, for long istance reaing, the cooling system to joint in series, the icon system, to keep the interaction between user an machine intuitive. The entire weling process is controlle an regulate with energy output compensation epening on ambient temperature an the inication of cooling time. The unit has 1000 protocols permanently store in the internal memory. The user can copy the fusion reports in an USB stick to print them out in PDF format. Scope of elivery inclues: transport box, 1 pair of angle aapter clips 4.0 mm, 1 pair of angle aapter clips 4.7 mm, operating instructions, START/STOP bage an USB memory stick. The mini Weling Book is available as option. Technical Data: Operating temperature: -20 C to +50 C Fusion ata input moe: bar coe, manual Mains voltage: 230V (190V - 265V) Mains frequency: Hz Weling technique: Voltage controlle Fusion voltage: 8-42 V (48 V) Fusion current: 90 A (max) Suggeste power generators: 3.5 kva Internal memory capacity: 1000 protocols Fittings range: mm Protocols format: PDF an binary (compatible with mini Weling Book) USB Port: Type A Protection factor: Class 1 / IP 65 Mains cable: 4 m Fusion cable: 4 m Weight: ca kg Display: Graphical CD, ajustable contrast anguages support: all Type Barcoe scanner, transport case, mini Weling Book Barcoe scanner, transport case, mini Weling Book, Swiss plug Barcoe scanner, transport case, mini Weling Book, 8m weling cables

46 Prouct range Double clamp with universal link Recommene for the installation of fittings COO-FIT an EGEF Plus The clamping allows installation without tension an avois movement uring fusion an cooling time The centrally locate ajustable universal link allows installation of electrofusion couplers, elbows an reucers Works above, below an alongsie the joint Aaptor for use with Tee-pieces available (see accessories) Description Scope of elivery: 2 x V-block, 2 x Straight bar, 1 x Universal link, Transport bag (600x380x250) Scope of elivery: 2 x V-block, 2 x Straight bar, 1 x Universal link, Transport bag (780x780x580) B H Quaruple clamp with universal link Recommene for the installation of fittings COO-FIT an EGEF Plus The clamping allows installation without tension an avois movement uring fusion an cooling time The centrally locate ajustable universal link allows installation of electrofusion couplers, elbows an reucers Universal use; works above, below an alongsie the joint Aaptor for use with Tee-pieces available (see accessories) Description Scope of elivery: 4 x V-block, 2 x Straight bar, 1 x Universal link, Transport bag (600x380x250) Scope of elivery: 4 x V-block, 2 x Straight bar, 1 x Universal link, Transport bag (780x780x580) B H Tee aaptor Suitable for clamping tool ( ) 1 Description B H Tee aaptor Tee aaptor V-block Suitable for clamping tool ( ) 1 Description B H V-block complete V-block complete

47 Prouct range Bar extension Suitable for clamping tool ( ) 1 Description B H Bar extension

48 GF Piping Systems Worlwie at home Our sales companies an representatives ensure local customer support in over 100 countries Argentina / Southern South America Georg Fischer Central Plastics Suamérica S.R.. Buenos Aires, Argentina Phone gfcentral.ps.ar@georgfischer.com Australia George Fischer Pty t Riverwoo NSW 2210 Australia Phone +61 (0) australia.ps@georgfischer.com Austria Georg Fischer Rohrleitungssysteme GmbH 3130 Herzogenburg Phone +43 (0) austria.ps@georgfischer.com Belgium / uxembourg Georg Fischer NV/SA 1600 Sint-Pieters-eeuw / Belgium Phone +32 (0) Fax +32 (0) be.ps@georgfischer.com Brazil Georg Fischer Sist. e Tub. ta São Paulo/SP Phone +55 (0) br.ps@georgfischer.com Canaa Georg Fischer Piping Systems t Mississauga, ON 5T 2B2 Phone +1 (905) Fax +1 (905) ca.ps@georgfischer.com China Georg Fischer Piping Systems t Shanghai Phone china.ps@georgfischer.com Denmark / Icelan Georg Fischer A/S 2630 Taastrup Phone +45 (0) info.k.ps@georgfischer.com Finlan Georg Fischer AB VANTAA Phone +358 (0) Fax +358 (0) info.fi.ps@georgfischer.com France Georg Fischer SAS Roissy Charles e Gaulle Ceex Phone +33 (0) fr.ps@georgfischer.com Germany Georg Fischer GmbH Albershausen Phone +49 (0) info.e.ps@georgfischer.com Inia Georg Fischer Piping Systems Pvt. t Mumbai Phone Fax branchoffice@georgfischer.com Inonesia George Fischer Pte t Jawa Barat Phone Fax inonesia.ps@georgfischer.com Italy Georg Fischer S.p.A Cernusco S/N (MI) Phone it.ps@georgfischer.com Japan Georg Fischer t Osaka Phone +81 (0) jp.ps@georgfischer.com Korea Georg Fischer Korea Co. t Unit 2501, U-Tower 120 HeungeokJungang-ro (Yeongeok-ong) Giheung-gu, Yongin-si, Gyeonggi-o Phone Fax kor.ps@georgfischer.com Malaysia George Fischer (M) Sn. Bh Shah Alam, Selangor Darul Ehsan Phone +60 (0) Fax +60 (0) my.ps@georgfischer.com Mexico / Northern atin America Georg Fischer S.A. e C.V. Apoaca, Nuevo eon CP66636 Mexico Phone +52 (81) Fax +52 (81) mx.ps@georgfischer.com Mile East Georg Fischer Piping Systems (Switzerlan) t Dubai, Unite Arab Emirates Phone gcc.ps@georgfischer.com Netherlans Georg Fischer N.V PA Epe Phone +31 (0) nl.ps@georgfischer.com Norway Georg Fischer AS 1351 Ru Phone no.ps@georgfischer.com Philippines George Fischer Pte t Representative Office Phone Fax sgp.ps@georgfischer.com Polan Georg Fischer Sp. z o.o Sekocin Nowy Phone +48 (0) polan.ps@georgfischer.com Romania Georg Fischer Piping Systems (Switzerlan) t Bucharest - Sector 2 Phone +40 (0) ro.ps@georgfischer.com Russia Georg Fischer Piping Systems (Switzerlan) t Moscow Phone ru.ps@georgfischer.com Singapore George Fischer Pte t 11 Tampines Street 92, #04-01/ Singapore Phone Fax sgp.ps@georgfischer.com Spain / Portugal Georg Fischer S.A Mari Phone +34 (0) es.ps@georgfischer.com Sween Georg Fischer AB Stockholm Phone +46 (0) info.se.ps@georgfischer.com Switzerlan Georg Fischer Rohrleitungssysteme (Schweiz) AG 8201 Schaffhausen Phone +41 (0) ch.ps@georgfischer.com Taiwan Georg Fischer Co. t San Chung Dist., New Taipei City Phone Fax Unite Kingom / Irelan George Fischer Sales imite Coventry, CV2 2ST Phone +44 (0) uk.ps@georgfischer.com USA / Caribbean Georg Fischer C 9271 Jeronimo Roa Irvine, CA Phone Fax us.ps@georgfischer.com International Georg Fischer Piping Systems (Switzerlan) t 8201 Schaffhausen/Switzerlan Phone +41 (0) Fax +41 (0) info.export@georgfischer.com The technical ata are not bining. They neither constitute expressly warrante characteristics nor guarantee properties nor a guarantee urability. They are subject to moification. Our General Terms of Sale apply GFDO_6221_4b (02.17) Georg Fischer Piping Systems t CH-8201 Schaffhausen/Switzerlan, 2017

Relaxed under pressure

GF Piping Systems Relaxed under pressure Pressure Reducing Valve Type 582 Pressure Retaining Valve Type 586 Rethinking what a PRV can be Introducing our pressure regulating valves with a completely re-engineered