Manufacturer since 1873
|
|
- Gavin Howard
- 6 years ago
- Views:
Transcription
1 Manufacturer since
2 Contact Company Development Mail: Petrotest Instruments GmbH & Co. KG Ludwig-Erhard-Ring Dahlewitz Germany From Berthold Pensky... In 1873, Mr. Berthold Pensky, an engineer at the "Kaiser-Wilhelm-Institute" in Berlin-Dahlem, today known as the "Bundesanstalt für Materialprüfung" (German Federal lnstitution for Materials Testing), founded his own company and produced Pensky-Martens flash-point testers, Abel-Pensky flash-point testers, as well as viscometers, grain testers and other machinery. Website: w w w.petrotest.com... through Sommer & Runge , upon his appointment to the official position of a "Royal Prussian Planning Officer" Mr. Pensky sold his company to two of his employees, Mr. Wilhelm Sommer and Mr. Max Runge. By then, the above products were marketed in Germany, the Netherlands, Russia and Romania already. During the bombing of Berlin the factory was partially destroyed and had to move to other quarters. In 1948 a manufacturing line of mineral oil test instruments for the German speaking market was started Fax: +49 (0) / Phone: +49 (0) / Direct line to: Experts: -350 Service: -442 Sales: -521 Shipping: -521 Marketing: -348 Purchase: -336 Accounting: -344 Management: -314 ISO 9001 certified... to Petrotest Instruments Following the reunification of Germany, Sommer & Runge (SuR) reformed and renamed under Petrotest Instruments GmbH & Co KG. Due to the need for expansion Petrotest relocated in a brand new building on the outskirts of Berlin in the Dahlewitz Industrial Park. Approximately 60 employees are engaged in the production of mechanical and electronic laboratory instruments such as flash-point testers, Fraass breaking point testers, penetrometers etc. Further improvement and development of more automatic petroleum testing equipment can be expected. Petrotest Philosophy since 1996 In order to be a highly flexible and reliable partner to our customers, we decided to locate the entire range of branches needed in our company. Application Customer Care Centre Electronical & Mechanical Design Software Development Production incl. CNC-machinery Assembling Quality Control according ISO 9001 Marketing Order & Shipping Stockage This gives us the potentiality to provide even customized solutions. Therefore do not hesitate to ask. 2
3 Chapters (A) Sampling Devices... 4 (B) Density & Gravity Testing (C) Viscosity Testing Page (D) Distillation Units ADU (E) Flash-Point & Auto-Ignition Testing (F) LPG Testing (G) Fuel Testing (H) Constituent Analyzer (S / Cl / Salt etc.) (K) Oil Testing (K) Field Tests - Quick Checks PMA (L) Friction & Wear Testing (M) Grease & Wax Testing (N) Bitumen Testing (P) Thermometers (Q) Calibration Fluids (R) Metal Specimen (T) Penetration & Texture Testing BPA (V) Various Equipment Tables of Contents by Title by Order Numbers by Standards PNR We reserve the right to make changes to all following information without prior notice. 3
4 Sampling Devices Sampling Devices ASTM D ASTM D ASTM D DIN EN 58 - FTM ISO ISO JIS C JIS K2254 (ASTM D 270, DIN obs.) 19-.pdf Sampling Tubes - open (Grease) ASTM D 4057 (ASTM D 270 obs.) - DIN EN 58 (DIN , IP 51 obs.) (Auger) (ASTM) (DIN) Sampling Tubes - open DIN EN 58 - ISO Sampling Tubes - closed DIN EN 58 - ISO Tank Sampling Bottles ASTM D ASTM D 4057 (ASTM D 270 obs.) - DIN EN 58 - ISO (DIN obs.) - JIS C JIS K2254 Tank Sampling by Scoop-Thermometer scoop Ø 35 mm, length 100 mm with thermometer range C with thermometer range C (BACON) (Can) (Glas) 19-.pdf Lowering Equipment Wheel with Wire Cord ( ) Brass Chain ( to ) Hemp Rope ( ) Perlon Cord ( ) 4
5 Density & Gravity Testing Tempering Bath for Density, API & Specific Gravity ASTM D 70 - ASTM D 71 - ASTM D ASTM D ASTM D ASTM D ASTM E DIN DIN (DIN 1995 obs.) - IP IP IP ISO ISO JIS K JIS K JIS K2265 (BS BS 4699 obs.) - 4-place full-view acryl bath - for determination of Density, Specific & API Gravity - up to +60 C max pdf (230V) (115V) Tempering Bath for Density, API & Specific Gravity ASTM D 70 - ASTM D 71 - ASTM D ASTM D ASTM D ASTM D ASTM E DIN DIN (DIN 1995 obs.) - IP IP IP ISO ISO JIS K JIS K JIS K2265 (BS BS 4699 obs.) - 4-place full-view borosilicate bath - for determination of Density, Specific & API Gravity - up to +150 C max pdf (230V) (115V) Hydrometer, DIN Series M 100 DIN Ref. temp.: +20 C, max. length: 250 mm, scale division: g/cm 3 Hydrometer, API Specific Gravity - ASTM E 100 ASTM D ASTM D ASTM E IP ISO JIS K2249 Ref. temp.: +60 F, max. length: 330 mm, scale division: 0.1 API Hydrometer, ASTM Specific Gravity - ASTM E 100 ASTM D ASTM E IP JIS K2249 Ref. temp.: +60 F, max. length: 330 mm, scale division: g/cm 3 Hydrometer, Density - Series M 50 SP ASTM D IP JIS K2249 Ref. temp.: +15 C, max. length: 270 mm, scale division: g/cm 3 Hydrometer, Density - Series L 50 SP ASTM D IP JIS K2249 Ref. temp.: +15 C, max. length: 335 mm, scale division: g/cm 3 Hydrometer, Density - Series L 50 SP ASTM D IP JIS K2249 Ref. temp.: +20 C, max. length: 335 mm, scale division: g/cm etc.pdf to etc.pdf to etc.pdf to etc.pdf to etc.pdf to etc.pdf to
6 Density & Gravity Testing Hydrometer, Specific Gravity - Series M 50 SP ASTM D IP JIS K2249 Ref. temp.: +60 F, max. length: 270 mm, scale division: g/cm 3 Hydrometer, Specific Gravity - Series L 50 SP ASTM D IP JIS K2249 Ref. temp.: +60 F, max. length: 335 mm, scale division: g/cm etc.pdf to etc.pdf to Hydrometer (Thermo-), Specific Gravity - ASTM 101H ASTM D etc.pdf ( F) ( C) Pycnometer - LIPKIN ASTM D IP ISO 3838 (DIS 3658 obs.) - JIS K2249 (BS 4699 obs.) etc.pdf Pycnometer - GAY-LUSSAC IP 190 (BS 4699 obs.) - ISO 3838 (DIS 3658 obs.) - JIS K etc.pdf Pycnometer - HUBBARD ASTM D 70 - ISO 3838 (DIS 3658 obs.) - JIS K2249 ASTM D 70 - DIN (DIN 1995 obs.) - ISO 3838 (DIS 3658 obs.) - IP 190 (BS 4699 obs.) - JIS K etc.pdf (IP) (ISO) 14 Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer see: LPG 14 Density or Relative Density of Gases by SCHILLING Effusiometer see: LPG Density Balance (digital) ASTM D 71 - DIN (IP 59-A+B obs.) - conversion of measured balance to density - build-in RS 232 C interface - platform with solid stand pdf (115/230V) 6
7 Viscosity Testing Tempering Baths for Viscosity - Kinematic Capillary Methods ASTM D ASTM D ASTM D (DIN , DIN obs) - EN FTM IP IP ISO 3104 (NF T obs.) - ISO JIS K JIS K2283 Tempering Bath for Viscositytubes - Ambient Temperature - 4-place full-view acryl bath - max. temperature up to +60 C - for Ubbelohde-, Cannon-Fenske- or BS/IP-U-Tube-viscometers Tempering Bath for Viscositytubes - High Temperature - 7-place bath - temperature up to +150 C max. - for Ubbelohde-, Cannon-Fenske- or BS/IP-U-Tube-viscometers pdf (230V) (115V) pdf (230V) (115V) Viscosity by UBBELOHDE Capillary - AKV (automatic) ASTM D ASTM D IP JIS K pdf (230V) (115V) Viscosity by UBBELOHDE ASTM/DIN Capillary - ViscoClock (semi-automatic) ASTM D ASTM D DIN IP IP ISO 3104 (NF T obs.) - ISO JIS K fits almost every customer's tempering bath - for bath temperature ranges of -40 to +150 C - interface for PC or printer pdf (230V) (115V) Viscometer, UBBELOHDE ASTM-Type - UAV (Suspended Level) ASTM D ASTM D FTM IP ISO 3104 (NF T obs.) - ISO JIS K pdf (manual) (automatic) Viscometer, UBBELOHDE DIN-Type - UDV (Suspended Level) ASTM D ASTM D DIN DIN ISO 3104 (NF T obs.) - ISO JIS K pdf (manual) (automatic) Viscometer, UBBELOHDE Micro Viscometers - UMV (Suspended Level) ASTM D ASTM D DIN JIS K pdf (manual) (automatic) Viscometer, CANNON-UBBELOHDE Semi-Micro - CUSMV (Suspended Level) ASTM D ASTM D IP ISO 3104 (NF T obs.) - ISO JIS K pdf (manual) 7
8 Viscosity Testing Viscometer, CANNON-FENSKE Routine - CFRV (Ostwald) ASTM D ASTM D ASTM D FTM IP IP ISO 3104 (NF T obs.) - ISO JIS K pdf (manual) Viscometer, CANNON-FENSKE Opaque - CFOV (Reverse Flow) ASTM D ASTM D ASTM D DIN (DIN obs., DIN obs.) - DIN EN FTM IP IP ISO 3104 (NF T obs.) - ISO JIS K JIS K pdf (manual) Viscometer, BS/IP U-Tube - BS/IP/RF (Reverse Flow) ASTM D ASTM D ASTM D DIN (DIN obs., DIN obs.) - DIN EN FTM IP IP ISO 3104 (NF T obs.) - ISO JIS K JIS K pdf (manual) Viscometer, BS/IP - BS/IP/SL(S)(Suspended Level) ASTM D ASTM D FTM IP ISO 3104 (NF T obs.) - ISO JIS K pdf (manual) Viscometer, Micro-OSTWALD - MOV (Ostwald) ASTM D ASTM D FTM IP ISO 3104 (NF T obs.) - ISO JIS K pdf (manual) (automatic) 38 Viscometer, ZEITFUCHS Cross-Arm - ZCAV (Reverse Flow) ASTM D ASTM D ASTM D EN FTM IP IP ISO 3104 (NF T obs.) - ISO JIS K JIS K2283 Viscosity, Oil Standards ASTM D ASTM D ISO 9001 (DIN obs.) Viscometer, Vacuum - CMVV, AIVV, MKVV ASTM D EN IP Cannon-Manning - CMVV Viscometer, Asphalt Institute - AIVV Viscometer, Modified Koppers - MKVV Viscosity, Specific by ENGLER pdf (manual) pdf (Primary) (Secondary) pdf see: Bitumen 8
9 Viscosity Testing Viscosity by REDWOOD (manual) IP 70 (obs.) with oil cup n with oil cup n pdf (230V) (230V) Viscosity by SAYBOLT (manual) ASTM D 88 - ASTM E AASHTO T72 - FTM JIS K viscosity tubes, gold plated - stainless steel housing - thermostatically controlled test bath with electric stirrer pdf (230V) (115V) Viscosity by Falling Ball - HÖPPLER (manual) DIN pdf Viscosity by Falling Ball - JUNG Check see: Oil 30 Viscosity by Comparator - Viscosity Check see: Oil 30 Viscosity by Flow Cup - FORD (manual) DIN ASTM D 1200 (NF T obs.) pdf (DIN) (ASTM) Viscosity by Flow Cup - ISO (manual) ASTM D DIN ISO 2431 (EN 535 obs.) pdf (ISO) 9
10 Distillation Units Distillation at Atmospheric Pressure - ADU 4 (automatic) ASTM D 86 - IP ISO JIS K2254 ASTM D ASTM D IP 195 ADU 4 : basic unit ADU 4F : basic unit with built-in fire-extinguisher - low price - high value - software included - ultra-high heating power - safety-heater-rods reduce burn-risk Distillation at Atmospheric Pressure - ADU 4-DryPoint (automatic) ASTM D 86 - IP ISO JIS K2254 ASTM D ASTM D IP 195 ADU 4D : basic unit with built-in dry-point ADU 4FD : basic unit with built-in fire-extinguisher & dry-point - low price - high value - software included - ultra-high heating power - safety-heater-rods reduce burn-risk Distillation at Atmospheric Pressure - DU 4-Economy (manual) ASTM D 86 - IP ISO JIS K2254 ASTM D ASTM D IP 195 DU 4-Eco basic unit with: - 800W heater - external bath-tempering - for distillation groups 0-3 & 4 (up to +300 C) DU 4-EcoPlus basic unit with: W heater (safety-heater-rods reduce burn-risk) - external bath-tempering - for distillation groups 0-4 DU 4-EcoThermo basic unit with: - 800W heater - with built-in bath-heater but external cooling - for distillation groups 0-3 & 4 (up to +300 C) DU 4-EcoThermoPlus basic unit with: W heater (safety-heater-rods reduce burn-risk) - with built-in bath-heater but external cooling - for distillation groups pdf (230V) (115V) - ADU (230V) (115V) - ADU 4F pdf (230V) (115V) - ADU 4D (230V) (115V) - ADU 4FD pdf (230V) (115V) - Eco (230V) (115V) - EcoPlus (230V) (115V) - EcoThermo (230V) (115V) - EcoThermoPlus Distillation at Atmospheric Pressure - DU 4-Professional (manual) ASTM D 86 - IP ISO JIS K2254 ASTM D ASTM D IP 195 DU 4-Pro : basic unit with built-in fire-extinguisher DU 4-ProThermo:.. with built-in fire-extinguisher & bath heating - low price - high value - available for distillation groups 0-3 or ultra-high 1200 W heater (safety-heater-rods reduce burn-risk) pdf (230V) (115V) - Pro (230V) (115V) - ProThermo Distillation of Pitch ASTM D pdf (230V) 10
11 Flash-Point & Auto-Ignition Flash-Point Testing with Closed Cup acc. ABEL - ABA 4 (automatic) IP ISO NF T ISO ISO 3680 DIN NF M ISO ISO EN IP IP 492 ABA 4 - Air : air cooled version ( ) ABA 4 - Water : water cooled, low temperature version ( ) pdf (115/230V) - air cooled (115/230V) - water cooled - 1-twist handling - ABAcon PC-software included - RAPID-flash set and milli-cup available Flash-Point Testing with Closed Cup acc. TAG - TAG 4 (automatic) ASTM D 56 - FTM JIS K2265 ASTM D ASTM D EN 924 ISO ISO 3680 ASTM D ASTM D EN IP IP ISO ISO 1523 TAG 4 - Air : air cooled version ( ) TAG 4 - Water : water cooled, low temperature version ( ) pdf (115/230V) - air cooled (115/230V) - water cooled - 1-twist handling - TAGcon PC-software included - milli-cup & RAPID accessories available Flash-Point Testing with Closed Cup acc. PENSKY-MARTENS - PMA 4 (automatic) ASTM D 93-A+B - JIS K AASHTO T73 - AASHTO T172 - FTM FTM IP 34-A+B - ISO 2719-A+B (EN obs.) ASTM D 6751 ISO BS twist handling - PMAcon PC-software included - fire-extinguisher option Flash-Point Testing - Sample Changer with PMA 4 (automatic) PMA 4 S: standard version ( or ) PMA 4 FS: fire-extinguishing version ( or ) PMA 4 S C: chilled sampler set version ( or ) PMA 4 FSC: fire-extinguishing & chilled sampler set version - up to 12 test-places - software included - milli-cup option ( or ) pdf (115/230V) (115/230V) - with fire-extinguisher pdf (with EU-plug) (with US-plug) (with EU-plug) (with US-plug) (with EU-plug) (with US-plug) (with EU-plug) (with US-plug) Flash- & Fire-Point Testing with Open Cup acc. CLEVELAND Open Cup - CLA 4 (automatic) ASTM D 92 - FTM IP 36 - ISO JIS K AASHTO T48 Superpave - barometric pressure correction - skimmer available - bitumen test option - PC-software included pdf (115/230V) 11
12 Flash-Point & Auto-Ignition Auto-Ignition Temperature - ZPA 3 (automatic) EN DIN CEI NF T NF T /831/EWG - autosampler available with or without heated sample-feeder - fully automatic test cycle - special solid heating program pdf (230V) (115V) Flash-Point Testing with Closed Cup acc. ABEL (semi-automatic) IP ISO NF T EN IP IP ISO ISO 1523 Note! Abel-Pensky Model available upon request pdf (230 V) Flash-Point Testing with Closed Cup acc. TAG (semi-automatic) ASTM D 56 - FTM JIS K pdf (230V) (110V) Flash-Point Testing with Open Cup acc. TAG (semi-automatic) ASTM D ASTM D pdf (230V) Flash-Point Testing with Closed/Open Cup acc. RAPID Tester "Series 3" (automatic) IP ASTM D 3828-B - ISO JIS K2265 ASTM D 3278-B - UN Class 3 N - ASTM E 502 IP ASTM D 3828-A - ISO 3680 ASTM D 3278-A ASTM D ISO BS 3900-A11 - UN Class 3 L.3 - CFR pdf (115/230V) - closed cup (115/230V) - open cup (115/230V) - special Flash-Point Testing with Closed/Open Cup acc. RAPID Tester "Series 7 & 7+" (automatic) IP ASTM D 3828-B - ISO JIS K2265 ASTM D 3278-B - UN Class 3 N - ASTM E 502 IP ASTM D 3828-A - ISO 3680 ASTM D 3278-A pdf (115/230V) - high temperature (115/230V) - low temperature Flash-Point Testing with Closed Cup acc. PENSKY-MARTENS - PMP 4 (semi-automatic) ASTM D 93-A+B - JIS K FTM FTM AASHTO T73 - AASHTO T172 - IP 34-A+B - ISO 2719-A+B (EN obs.) ASTM D 6751 ISO BS twist handling - barometric pressure correction - automatically controlled heating rate pdf (115/230V) 12
13 Flash-Point & Auto-Ignition Flash-Point Testing with Closed Cup acc. PENSKY-MARTENS - PM 4 (semi-automatic) ASTM D 93-A+B - JIS K FTM FTM AASHTO T73 - AASHTO T172 - IP 34-A+B - ISO 2719-A+B (EN obs.) ASTM D 6751 ISO BS twist handling - gas & electric igniter - manual adjusted heating rate pdf (230V) Flash-Point Testing with Closed Cup acc. PENSKY-MARTENS - PM (manual) ASTM D 93-A - JIS K AASHTO T73-A - AASHTO T172-A - FTM FTM IP 34-A - ISO 2719-A (EN obs.) ASTM D 6751 ISO BS Optional IP 35 - adjustable gas burner (for all gas-types) - hand operated stirrer - open cup-option (IP 35) pdf (Gas) Flash-Point Testing with Closed Cup acc. PENSKY-MARTENS - Army Check (manual) (Field Test) similar to international Pensky-Martens methods Flash- & Fire-Point Testing with Open Cup acc. CLEVELAND - CL (semi-automatic) ASTM D 92 - JIS K AASHTO T48 -FTM IP 36 - ISO 2592 Superpave - 3 interchangeable test flame jets - electric heating - gas ignition Flash- & Fire-Point Testing with Open Cup acc. CLEVELAND (manual) ASTM D 92 - JIS K AASHTO T48 -FTM IP 36 - ISO 2592 Superpave - 3 interchangeable test flame jets - adjustable gas burner (for all gas-types) - gas ignition pdf (230V) (115V) pdf (115/230V) pdf (Gas) Auto-Ignition Temperature (semi-automatic) ASTM E pdf (230V) Auto-Ignition Temperature of Solids acc. Grewer (semi-automatic) VDI 2263 (in analogy to 79/831/EWG) pdf (230V) 13
14 Liquified Petroleum Gas Testing Water Vapor Content by Dew-Point (manual) ASTM D pdf to Dryness by Freeze Valve (manual) ASTM D IP ISO pdf Vapor Pressure (manual) ASTM D IP IP ISO JIS K JIS K digital Manometer PA-REID available pdf Corrosion by Copper Strip (manual) ASTM D ISO ISO IP JIS K pdf (230V) Volatility & Residue by Propane Residue (Mercury Freeze Method) (manual) ASTM D NF M ASTM D IP pdf Density or Relative Density by SCHILLING Effusiometer (manual) IP 59-C (obs.) pdf Density or Relative Density by Pressure Hydrometer (manual) ASTM D IP ISO 3993 (NF M obs.) - DIN DIN pdf (230V) Hydrogen Sulfide in Liquefied Petroleum (manual) ASTM D ISO 8819 (NF M obs.) pdf (230V) (115V) 14
15 Fuel Testing Density Balance see: Density 6 Flash-Point by TAG & Auto-Ignition see: Flash-Point 12 GUM by Jet Evaporation (manual) ASTM D DIN FTM ISO IP IP JIS K2261 (BS 4348, EN obs.) - highest level of user safety - all necessary auxiliary devices are available - complete re-calibration set is available pdf (230V) (115V) Aniline Point by Method A (Test Tube) (manual) ASTM D 611-A - lp 2-A - JIS K NF M ISO 2977-A - (DIN , DIN obs.) - available with ASTM or DIN test tube pdf (ASTM) (DIN) Aniline Point by Method B (Thin Film) (manual) ASTM D 611-B - lp 2-B - JIS K NF M ISO 2977-B (DIN , DIN obs.) pdf (230V) (115V) Aniline Point by Method D (U-Tube) (manual) ASTM D 611-D - lp 2-D - JIS K NF M ISO 2977-D (DIN , DIN obs.) pdf (230V) (115V) Aniline Point by Method E (automatic) ASTM D 611-E - FTM IP 2-E - JIS K NF M ISO 2977-E (DIN DIN obs.) (Method E is the automatic procedure of methods A and B) pdf (230V) Fluorescent Indicator Adsorption - FIA (manual) ASTM D FTM IP ISO JIS K NF M (EN 10 obs.) - 4-place - standard column test kit - precision bore column test kit pdf (230V) (115V) Depentanization by PONA (manual) ASTM D pdf (230V) (115V) Vapor Pressure by REID (manual) ASTM D 323-A+B+D - ASTM D 4953-A - IP 69-A+B+D - ISO 3007-A+B+D - JIS K2258 ASTM D 323-C - IP 69-C - ISO 3007-C - JIS K digital manometer PA-Reid & baths available - liquid chamber (1 opening) for less than 180 kpa - liquid chamber (2 openings) for above than 180 kpa pdf ( 180 bar) ( 180 bar) 15
16 Fuel Testing Vapor Pressure Analyzer - PetroVap II (automatic) ASTM D EN IP IP 481 Correlates with: ASTM D JIS K ASTM D ASTM D ASTM D ISO IP pdf (115/230V) Vapor Pressure Analyzer (automatic) ASTM D EN IP IP 409 Correlates with: ASTM D JIS K ASTM D ASTM D ASTM D ASTM D ASTM D ISO IP 69 Lead & Salt by Hot-Extraction - TEL Lead in Gasoline - Iodine Monochloride Method Freezing Point (manual) ASTM D IP 16 - ISO JIS K2276 (DIN obs.) Freezing Point of Antifreeze Solutions (manual) ASTM D NF T pdf ( V) see: Constituents see: Constituents pdf (230V) pdf (230V) Cold Filter Plugging Point - CFPP (manual) ASTM D EN IP JIS K2288 (DIN , SIS obs.) CFPP - Dry-Ice Test Arrangement pdf Cold Filter Plugging Point - CFPP (manual) ASTM D EN IP JIS K2288 (DIN , SIS obs.) CFPP I - Cryostat with 1 Test-Chamber pdf (230V) Cold Filter Plugging Point - CFPP (manual) ASTM D EN IP JIS K2288 (DIN , SIS obs.) CFPP V - Cryostat with 5 Test-Chambers pdf (230V) 42 Refractive Index & Dispersion by Universal ABBE Refractometer see: Various 42 Refractive Index & Dispersion by Modified ABBE Refractometer see: Various Refractive Index by High Performance Refractometer - ABBEMAT Refractive Index by Hand Refractometer - Eclipse Refractive Index by Refractometer - RFM 340 see: Various see: Various see: Various 16
17 Fuel Testing Conductivity by Field Method - DCM (manual) (Field Test) ASTM D DIN ISO IP JIS K pdf (Battery) Conductivity by Field Method - MLA (manual) (Field Test) ASTM D DIN ISO IP JIS K pdf (Battery) Conductivity by Lab Method - Precision (automatic) ASTM D 4308 Water Separation Characteristics by Micro-Separometer (semi-automatic) (Field Test) ASTM D ASTM D ASTM D ASTM D DIN JIS K2276 (battery rechargeable by 110V or 220V) pdf (Battery) pdf (Battery) (110/230V) Water Reaction by Mixing Cylinder (manual) ASTM D pdf Color by SAYBOLT-Scale Chromometer see: Oil 23 Lubricity by the High-Frequency Reciprocating Rig - HFRR see: Friction & Wear 31 Oxidation Stability of FAME - PetroOXY (automatic) ASTM D IP 40 - ISO 7536 EN pdf Oxidation Stability - OBA (semi-automatic) ASTM D FTM IP 40 - ISO JIS K2287 (BS 4347, DIN obs.) ASTM D FTM IP JIS K2276 (BS 4456, DIN obs.) - 4-place Liquid or Dry-Heat baths with vessel-holding option - safety approved oxidation vessels available - digital Manometer Oxidation Stability by Liquid Bath Test Arrangement - OBA 1 Oxidation Stability by Dry-Heat Bath Test Arrangement - OBA 1/T pdf (230V) (115V) (230V) (115V) 17
18 Fuel Testing pdf Oxidation Stability by Liquid Bath Safety Test Arrangement - OBA 2 Oxidation Stability by Dry-Heat Bath Safety Test Arrangement - OBA 2/T (230V) (115V) (230V) (115V) Smoke Point by Lamp Method (manual) ASTM D FTM IP 57 - ISO JIS K NF M (DIN obs.) pdf Burning Quality by Lamp Method (manual) ASTM D IP 10 - FTM pdf Corrosion by Copper Strip Tarnish Test (manual) ASTM D ASTM D DIN FTM IP IP ISO JIS K JIS K2513 (BS 4351, DIN obs.) pdf (230V) (115V) Corrosion by Silver Strip Test (manual) IP 227 (obs.) pdf (230V) Corrosion by Copper Strip Test (manual) ASTM D with 1 test-place with 4 test-places Coking Tendency by CONRADSON Carbon Residue (manual) ASTM D DIN FTM IP 13 - ISO JIS K2270 (BS 4380, NF T obs.) for MUNICIPAL gas supply for BUTANE/PROPANE gas supply for NATURAL gas supply pdf (230V) (115V) (230V) (115V) pdf (Gas) (Gas) (Gas) Coking Tendency by Micro Carbon Residue - MCR-210 (manual) ASTM D IP ISO JIS K pdf (230V) Coking Tendency by RAMSBOTTOM Carbon Residue - RCRT (manual) ASTM D FTM IP 14 - ISO NF T (BS 4451 obs.) pdf (230V) (115V) 18
19 Fuel Testing Particulates & Filter Membrane Color Ratings by Aviation Fuel Contamination Sampler - AFCON see: Constituents 21 Particulates & Free Water see: Constituents 21 Particulate Contamination in Aviation Fuel by Laboratory Filtration ASTM D IP pdf Heat of Combustion by Calorimeter - C 2000 (automatic) ASTM D ASTM D ASTM D DIN ISO JIS K2279 (ASTM D 1989 obs.) pdf (230V) Water & Sediment by Centrifuge see: Constituents 22 Sediment by Extraction see: Constituents 22 Total Sediment see: Constituents 22 Salts by Conductivity (electrometric) - Salinometer see: Constituents 21 Asphaltenes by Extraction see: Constituents 21 Mercaptan by Doctor-Test see: Constituents 21 Stability - Thermal for Jet Fuel (manual) ASTM D FTM IP ISO 6249 (ASTM D 1661 obs.) pdf Sulfur & Chlorine by WICKBOLD Combustion see: Constituents 20 19
20 Constituent Analyzers Sulfur & Chlorine by WICKBOLD Combustion (manual) ASTM D ASTM D DIN EN FD M IP ISO JIS K JIS K pdf (230V) (115V) Sulfur & Chlorine by Pressure Vessel (manual) ASTM D ASTM D FTM IP 61 - JIS K (BS 4454 obs.) - Sulfur ASTM D 808 (DIN obs.) - Chlorine pdf (230V) (115V) Sulfur & Chlorine by GROTE-KREKELER (manual) DIN JIS K pdf (230V) Sulfur & Chlorine by High Temperature (manual) ASTM D DIN DIN pdf (230V) (115V) Sulfur by SCHÖNIGER (Thorin-Titration) (manual) DIN (similar IP 242) pdf Sulfur by Raney-Nickel (manual) DIN (obs.) pdf (230V) Sulfur (Active) (manual) ASTM D pdf (230V) (115V) Sulfonation Number by Shaking Machine (manual) FTM pdf (230V) Unsulfonated Residue of Plant-Spray-Oil by Combined Shaking Machine (manual) ASTM D pdf (230V) 20
21 Constituent Analyzers Mercaptan Sulfur by ph-meter (manual) ASTM D IP ISO JIS K2276 (NF M obs.) pdf (230V) Mercaptan by Doctor-Test (manual) ASTM D DIN IP 30 - ISO JIS K pdf Asphaltenes by Extraction (manual) ASTM D DIN IP pdf (230V) (115V) Fluorescent Indicator Adsorption - FIA see: Fuel 15 Depentanization by PONA see: Fuel 15 Salts by Conductivity (electrometric) - Salinometer SCO 1 (manual) ASTM D IP JIS K laboratory bench model pdf (230V) Salts by Conductivity (electrometric) - Salinometer Portable (manual) (Field Test) ASTM D IP JIS K pdf (230V) (115V) Lead & Salt by Hot-Extraction - TEL (manual) IP 77 - DIN FTM IP 182 (ASTM D 526, ASTM D 2547, DIN , IP 96, IP 248, ISO 2083 obs.) pdf (220V) Lead in Gasoline - Iodine Monochloride Method (manual) ASTM D pdf Particulates & Filter Membrane Color Ratings by Aviation Fuel Contamination Sampler - AFCON (manual) ASTM D IP FTM JIS K pdf Particulates & Free Water (manual) ASTM D pdf
22 Constituent Analyzers Contamination by Diaphragm Filtration (manual) EN IP pdf Sediment, Total (manual) ASTM D IP IP 390-A - ISO pdf (230V) (115V) Sediment by Extraction (manual) ASTM D FTM IP 53 - ISO 3735 (BS 4382 obs.) pdf Water & Sediment by Centrifuge - PetroCEN (semi-automatic) Lubricating Oil Tests: ASTM D 91 - ASTM D JIS K _ASTM D 91.pdf _ASTM D 2273.pdf (230V) (115V) Water & Sediment by Centrifuge - PetroCEN (semi-automatic) Lubricating Oil Tests: ASTM D 893 Amount of Water and Sediment: API AASHTO T55 - JIS K2601 (ASTM D 96, BS 4385 obs.) ASTM D 4007 (IP 359 obs.) ASTM D API 2548 (DIN IP 75 obs.) ASTM D 2709 ISO _ASTM D 96.pdf _ASTM D 893.pdf _ASTM D 1796.pdf _ASTM D 2709.pdf _ASTM D 2711.pdf _ASTM D 4077.pdf _ISO 3734.pdf _ISO 9030.pdf (230V) - heatable < +70 C 22
23 Oil Testing Demulsification Number (manual) IP 19 (ASTM D 1935 obs.) pdf (230V) (115V) Demulsibility Characteristics (manual) ASTM D pdf (230V) Demulsibility Characteristics by HERSCHEL Stirring Method (semi-automatic) ASTM D IP ISO JIS K JIS K2520 (DIN , FTM obs.) - 7 place full-view bath - variable stirrer speed with digital display - automatic timer stop and audible alarm pdf (230V) (115V) Color by SAYBOLT-Scale Chromometer (manual) ASTM D DIN FTM JIS K NF M with scales for: Saybolt Color pdf (230V) (115V) Color by ASTM-Scale Comparator (manual) ASTM D IP ISO JIS K2580 (DIN , FTM , NF T obs.) with scales for: ASTM Color pdf (115/230V) Color by Colorimeter - PFX 195/2 (automatic) with scales for: Saybolt Color, ASTM Color, CIE Values, Spectral Data, Pt-Co / Hazen / APHA ASTM D 6045 ASTM D DIN JIS K NF M ASTM D IP ISO JIS K2580 (DIN , FTM , NF T obs.) ASTM D ASTM D 6166 (ASTM E 308 obs.) optional scales for: Gardner ASTM D pdf (115/230V) Color by Colorimeter - PFX 880/P (automatic) with scales for: Tristimulus Method (Automatic Saybolt Color & ASTM Color Scale), CIE Values, Spectral Data ASTM D 6045 ASTM D DIN JIS K NF M ASTM D IP ISO JIS K2580 (DIN , FTM , NF T obs.) (ASTM E 308 obs.) optional scales for: Pt-Co / Hazen / APHA, Gardner ASTM D ASTM D 6166 ASTM D Colorimeter PFX 880/P Colorimeter PFX 880/P-H with heated sample chamber pdf (115/230V) (115/230V) 23
24 Oil Testing Color by Colorimeter - PFX 995/P (automatic) with scales for: Tristimulus Method (Automatic Saybolt Color & ASTM Color Scale), CIE Values, Spectral Data, Pt-Co / Hazen / APHA, Gardner, Lovibond RYBN, IP Units ASTM D 6045 ASTM D DIN JIS K NF M ASTM D IP ISO 2049 (DIN , FTM , NF T obs.) ASTM D ASTM D 6166 ASTM D 1544 IP 17-A+B (ASTM E 308 obs.) Colorimeter PFX 995/P Colorimeter PFX 995/P-H with heated sample chamber pdf (115/230V) (115/230V) Tensiometer - Processor (automatic) ASTM D ASTM D ASTM D EN ISO ISO ISO JIS K2241 (ASTM D 1590, DIN obs.) Lecomte du Noüy Ring & Wilhelmy Plate Method pdf (115/230V) Tensiometer - Digital (semi-automatic) ASTM D ASTM D ASTM D EN ISO ISO ISO JIS K2241 (ASTM D 1590, DIN obs.) Lecomte du Noüy Ring & Wilhelmy Plate Method pdf (115/230V) Tensiometer - Scale (manual) ASTM D EN JIS K2241 (DIN obs.) Lecomte du Noüy Ring Method pdf Total Dirt by Refrigerated Centrifuge (semi-automatic) DIN pdf (230V) Fluidity by U-Tube Method (manual) DIN Flock Point (manual) DIN Resistance by Philipp Test (manual) DIN (obs.) pdf (230V) (115V) pdf (230V) (115V) pdf (230V) (115V) Solidity & Turbidity Point (manual) DIN (obs.) pdf
25 Oil Testing Cloud and Pour Point - CAPP (manual) ASTM D 97 - ASTM D ASTM D EN FTM IP 15 - IP IP ISO ISO NF T JIS K JIS K (BS 4458, DIN obs.) - 1-place type ( ) - 4-place type ( & ) - both types with circulation coil for external cooling pdf (230V) (115V) Cloud and Pour Point - CAPP I (semi-automatic) ASTM D 97 - ASTM D ASTM D EN FTM IP 15 - IP IP ISO ISO NF T JIS K JIS K (BS 4458, DIN obs.) 1 chamber with 4 test-positions & metal-block cryostat pdf (230V) (115V) Cloud and Pour Point - CAPP V (semi-automatic) ASTM D 97 - ASTM D ASTM D EN FTM IP 15 - IP IP ISO ISO NF T JIS K JIS K (BS 4458, DIN obs.) 5 chambers with 4 test-positions each & metal-block cryostat pdf (230V) (115V) Shear Stability by Diesel Injector Rig (manual) ASTM D ASTM D ASTM D CEC L-14-A-95 - DIN IP pdf (380V) (3x 220V) Shear Stability of Polymer-Containing Oils and Hydraulic Fluids - Sonic (semi-automatic) ASTM D ASTM D pdf (230V) Viscosity, High Temperature & High Shear Rate by Tapered-Plug Viscometer - HTHS (semi-automatic) ASTM D CEC L-36-A pdf (230V) Viscosity by Brookfield (semi-automatic) ASTM D 2983 DIN IP 267-B pdf (230V) Oil Content of Water Mixed Cooling Lubricants by Acidification & Saponification (manual) DIN DIN DIN IP pdf (230V) (230V) Stability by Oil / Layer Separation (manual) DIN IP 263 (similar) with emulsion stirring unit with magnetic stirrer unit pdf (230V) (230V) 25
26 Oil Testing Corrosion Preventing Characteristics by HERBERT Corrosion Test (manual) DIN IP pdf (230V) (115V) Corrosion Preventing Characteristics by Chip & Filterpaper Test (manual) DIN pdf (230V) (115V) 22 Insoluble Matters & Total Contamination by Diaphragm Filtration see: Constituents 20 Sulfur (Active) see: Constituents ph-value by ph-meter (manual) DIN (partially for ASTM D 1121, ASTM D 1287) pdf Ash by Muffle Furnace (manual) ASTM D ASTM D ASTM D ASTM D DIN DIN FTM FTM IP 4 - IP ISO ISO JIS K pdf (230V) Aging Stability by Baader (manual) DIN pdf (230V) (115V) Gasoline Diluent of Engine Oil by Distillation (manual) ASTM D IP flask heating on elctric heater flask heating with heating mantle pdf (230V) (230V) Oxidation Characteristics by TOST/TOO Dry-Heat - ASTM (manual) 4-place dry-heat bath: for tests up to 230 C ASTM D ISO ISO JIS K2514 (BS 4388 obs.) Oxidation Characteristics by TOST/TOO Dry-Heat - DIN (manual) 4-place dry-heat bath: for DIN-tests up to 230 C DIN FTM _ASTM D 943.pdf _ASTM D 4310.pdf _DIN pdf _ISO pdf (230V) (115V) pdf (230V) (115V) 26
27 Oil Testing Oxidation Characteristics by TOST/TOO Liquid - ASTM D 943 (manual) 4-place liquid bath: for tests up to 175 C ASTM D ASTM D ASTM D IP IP ISO DIN DIN FTM JIS C JIS K2514 (BS 4388 obs.) 8-place liquid bath: for tests up to 175 C ASTM D ASTM D ASTM D IP IP ISO DIN DIN FTM JIS C JIS K2514 (BS 4388 obs.) Oxidation Characteristics by TOST/TOO Liquid - ASTM D 2893 (manual) 4-place liquid bath: for tests up to 175 C ASTM D _ASTM D 943.pdf _ASTM D 4310.pdf _DIN pdf _ISO pdf pdf pdf (230V) (115V) (230V) (115V) pdf (230V) (115V) Oxidation Stability & Corrosiveness (manual) ASTM D aluminum block heater pdf (230V) Oxidation Stability by BAM 200 Liquid (manual) BAM 200 Liquid: flowmeter range l/h ASTM D DIN DIN EN A,B,C - IP IP IP IP ISO JIS C place liquid bath with low level and temperature excess protection Oxidation Stability by BAM 250 Liquid (manual) BAM 250 Liquid: flowmeter range l/h DIN IP 48 - ISO place liquid bath with low level and temperature excess protection _ASTM D 2440.pdf _DIN pdf _DIN pdf _EN pdf _IP 280.pdf _IP 306.pdf (230V) (115V) _DIN pdf _DIN pdf _IP 48.pdf (230V) (115V) 27
28 Oil Testing _DIN pdf Oxidation Stability by BAM 200 Dry-Heat (manual) BAM-200 Dry: flowmeter range l/h (Tube Ø 28) DIN BAM-200 Dry: flowmeter range l/h (Tube Ø 26) DIN place dry-heat bath with aluminum block heater - Option: available with 12-test places Oxidation Stability by BAM 250 Dry-Heat (manual) BAM-250 Dry: flowmeter range l/h (Tube Ø 28) DIN IP 48 - ISO BAM-250 Dry: flowmeter range l/h (Tube Ø 26) DIN IP 48 - ISO place dry-heat bath with aluminum block heater - Option: available with 12-test places (230V) (115V) _ASTM D 2440.pdf _DIN pdf _EN pdf _IP 280.pdf _IP 306.pdf (230V) (115V) _DIN pdf _DIN pdf (230V) (115V) _IP 48.pdf (230V) (115V) Oxidation Stability by Rotating Bomb - RBOT (automatic) ASTM D ASTM D IP JIS K ASTM D pdf (230V) Oxidation Stability by Rotating Bomb - RBOT (semi-automatic) ASTM D ASTM D IP JIS K ASTM D place bath - digital manometers PA4-RBOT - pressure indication in psi, kpa, bar, mwc pdf (230V) (115V) Rust Preventing Characteristics - TOR (semi-automatic) ASTM D BS FTM IP ISO JIS K NAC TM ASTM D ASTM D FTM pdf (230V) (115V) Rust Preventing by Chip & Filter (manual) DIN DIN IP IP pdf Rust Protection by Humidity Cabinet (manual) ASTM D JIS K pdf (230V) 28
29 Oil Testing Compatibility of Elastomer or Rubber with Lubricating Fluids & Greases ASTM D 4289 Air Release Value by Impinger (semi-automatic) ASTM D IP ISO 9120 Foaming Characteristics - Quadruple (manual) ASTM D 892 (sequence I-III)- IP ISO JIS K NF M Optional: ASTM D 6082 (sequence IV) Twin Foam-Tester - 4-places in each bath - full-view baths with digital-thermostats - each bath to be maintained individually at 24, 49, 93.5 or 150 C Single Foam-Tester - 4-place - full-view bath with digital-thermostat - to be maintained at 24, 49, 93.5 or 150 C pdf (230V) pdf (230V) (115V) pdf (230V) (115V) (230V) (115V) Foaming Tendencies of Engine Coolants (manual) ASTM D pdf (230V) (115V) Corrosion of Engine Coolants (manual) ASTM D JIS K pdf (230V) Evaporation Loss by NOACK - VP 4000 (automatic) Not yet approved by Standards Organisations but in analogy to: ASTM D 5800-B - CEC L-40-A-93 - IP 421-B wood metal free! pdf (230V) (115V) Evaporation Loss of Lubricants (manual) ASTM D ASTM D FTM IP JIS K pdf (230V) (115V) Hydrolytic Stability by Beverage Bottle (manual) ASTM D DIN pdf (230V) 29
30 Oil Testing & Field Tests Neutralization Number by Color-lndicator Titration (Acid & Base No.) - TAN & TBN (manual) ASTM D DIN FTM IP JIS C JIS K2501 (BS 2634 obs.) pdf Neutralization Number by Potentiometric Titration (Acid & Total Base No.) - TAN & TBN (manual) ASTM D ASTM D 4739 (alternative) - FTM IP JIS K2501 (BS 4457, DIN obs.) ASTM D IP ISO JIS K pdf (230V) (115V) 42 Refractive Index by Refractometer see: Fuel Coking Tendency by Panel Coking (manual) FTM pdf (220/240V) 18 Coking Tendency by Carbon Residue see: Fuel 41 Water Content see: Various Lube Oil - VARIO Check (Field Test) testing engine fluids on: Viscosity, Water in Oil, Base No, Salt Water Contamination, Insolubles pdf Viscosity by Comparator - Viscosity Check (Field Test) Viscosity by Falling Ball - JUNG Check (Field Test) Water in Oil - WIO Check (Field Test) PCB-Content - PCB Check (Field Test) USEPA SW (CLOR-N-OIL) pdf pdf pdf pdf
31 Friction & Wear Testing Friction & Wear by REICHERT M2 (manual) pdf (230V) Lubrication & Load Capability by BRUGGER (manual) DIN pdf (380V) (440/480V) Wear Characteristics (Extreme Pressure & Wear Properties, Shear Stability) by SHELL - Four-Ball Machine (manual) ASTM D FTM ASTM D 2596 ASTM D JIS K2519 ASTM D 4172 ASTM D 5183 IP 239 DIN FTM CEC L-45-T-99 ISO pdf (380V) With additional equipment: ASTM D ASTM D ASTM D CEC L-45-T-99 - DIN PV PV PV 1444 Wear Characteristics (Extreme Pressure & Wear Properties, Load Carrying Capacity) by FALEX Pin & Vee Block (manual) ASTM D 2625 ASTM D 2670 ASTM D pdf (230V) Wear Characteristics (Extreme Pressure Properties, Load-Carrying Capacity) by TIMKEN-Test (manual) ASTM D IP JIS K2220 ASTM D IP JIS K pdf (230V) (115V) Wear Characteristics (Scuffing Load Capacity & Shear Stability) by FZG Gear Oil Rig (manual) ASTM D ASTM D DIN CEC L-07-A pdf (380/415V) 31
32 Grease & Wax Testing Congealing Point by Rotating Thermometer (manual) ASTM D IP 76 - ISO 2207 (BS 5088 obs.) pdf (230V) (115V) Melting Point - Cooling Curve (manual) ASTM D 87 - BS FTM IP 55 - ISO JIS K pdf (230V) (115V) Melting Point - Drop (manual) ASTM D FTM IP JIS K pdf (230V) (115V) Saponification Number (manual) ASTM D 94-A - DIN FTM IP ISO JIS K pdf (230V) (115V) Neutralization Number by Color-Indicator Titration (manual) ASTM D IP 37 - JIS K2220 (DIN obs.) pdf (230V) (115V) Dropping Point (manual) ASTM D BS DIN FTM IP ISO JIS K pdf (230V) (115V) Dropping Point by Wide Temperature Range (manual) ASTM D DIN ISO JIS K place aluminum block oven pdf (230V) (115V) Oil Separation During Storage - ASTM (manual) ASTM D FTM JIS K pdf (230V) (115V) 32
33 Grease & Wax Testing Oil Separation During Storage - DIN/IP (manual) DIN IP pdf Oil Separation by Conical Sieve (manual) ASTM D FTM pdf Oxidation Stability - OFA (manual) ASTM D DIN FTM VV-L-791e IP JIS K screw-cap oxidation vessel OFA-2 with test glasses - digital manometer PA4-OFA - 4-place bath (liquid "OFA" or dry-heat "OBA/OFA") pdf (230V) Flow Pressure by KESTERNICH (manual) DIN for test temperature of -20 C for test temperature of -35 C pdf (230V) (230V) Low-Temperature Torque (automatic) ASTM D 1478 (obs.) pdf (230V) Evaporation Loss by Wide-Temperature Range (manual) ASTM D JIS K pdf (230V) Deleterious Particle Content by Estimation (manual) ASTM D pdf Leakage Tendencies by High Temperature (manual) ASTM D ASTM D ASTM D pdf (115/230V) 33
34 Grease & Wax Testing Leakage Tendencies - LNF-2 (automatic) ASTM D FTM JIS K temperature controlled test cabinet - control unit with four test programs pdf (230V) (115V) Corrosion Preventive Properties by Run-In Stand (manual) ASTM D ASTM D pdf (230V) Corrosion Preventive Properties by EMCOR (manual) ASTM D DIN IP ISO pdf (230V) Water Washout Characteristics - Dynamic Test (manual) ASTM D DIN FTM IP JIS K pdf (230V) Water Washout Characteristics - Static Test (manual) DIN place constant temperature bath pdf (230V) Resistance to Water Spray ASTM D pdf (230V) Mineral Oil & Soap Content by Dialysis (manual) DIN pdf (230V) Oil Content (manual) ASTM D ASTM D IP FTM JIS K2235 (DIN , ISO 2908 obs.) - glass accessories, electric stirrer & vacuum pump - 3-place bath for dry-ice with cooling coil ( ) - 3-place bath for dry-ice with cooling coil and cryostat ( ) pdf (230V) (230V) 34
35 Grease & Wax Testing Grease Penetration by Cone - PNR 12 (digital) ASTM D ASTM D ASTM D ASTM D DAB 10-V DIN DIN IP 50 - IP IP IP ISO JIS K JIS K NF T SHELL SMS 658 (DIN obs.) - cones (Standard, Quarter-Scale, Half-Scale, Micro-cones) - disk penetrator - needle penetrator _Grease.pdf pdf ( V) Grease Working by Machine (automatic) ASTM D FTM IP 50 - ISO JIS K NF T two-place model - worker with 51-hole or 270-hole worker plate - worker with screw or bayonet-coupling pdf (230V) Grease Working by Grease Worker Slave (manual) ASTM D IP 50 - ISO JIS K NF T pdf Grease Working by Micro-Grease Worker Quarter-Cone (manual) ASTM D IP ISO JIS K NF T pdf Grease Working by Micro-Grease Worker SHELL-Cone (manual) ASTM D IP ISO JIS K NF T pdf Roll-Stability of Lubricating Grease (semi-automatic) ASTM D MIL-G pdf (230V) 35
36 Bitumen Testing Breaking Point by FRAASS - BPA 5 (automatic) IP 80 - EN (DIN , NF T obs.) - JIS K programs for permanent bending, rapid test, etc. - build-in pelitier cooler - PC-software BPAcon available Breaking Point by FRAASS (manual) IP 80 - EN (DIN , NF T obs.) - JIS K2207 Tensile Properties - Force-Ductilometer Method - DDA 3 (automatic) Elongation: ASTM D AASHTO T 51 - JIS K2207 Recovery: ASTM D ASTM D AASHTO T EN IP 516 Force: EN EN AASHTO T300 - IP IP bath length of 100 cm or 150 cm available - 3 programs (semi-automatic for forces < 20 mn; automatic for forces > 20 mn up to 300 N; elastic recovery) - PC-software DDAcon available Tensile Properties - Ductilometer Method - DD 3 (semi-automatic) Elongation: ASTM D AASHTO T 51 - JIS K2207 Recovery: ASTM D ASTM D AASHTO T EN IP bath length of 100 cm or 150 cm available - 3 simultanious test runs possible - printer & 3 molds included pdf (230V) (115V) pdf pdf cm (230V) (115V) cm (230V) (115V) pdf cm (230V) (115V) cm (230V) (115V) Softening Point by Ring & Ball - RKA 5 (automatic) ASTM D 36 - AASHTO T53 - EN 1427 (DIN 52011, NF T obs.) - IP 58 - JIS K2207 EN 1871-F EN ISO BS ASTM E 28 EN optional: IP 58 and Wilhelmi-Method DIN 1996 pt.15 accessories - available with electromagnetic ball dispenser and automatic ball application Softening Point by Ring & Ball (manual) ASTM D 36 - EN IP 58 - JIS K2207 (DIN , NF T obs.) EN Softening Point by WILHELMI (manual) DIN EN 1871-F Softening Point by KRAEMER-SARNOW (manual) DIN (DIN 1995 obs.) pdf (230V) (115V) pdf (230V) (115V) pdf (230V) pdf (230V) (115V) 36
37 Bitumen Testing Effect of Heat and Air - Rolling Thin Film Oven Test Method - RTFOT (semi-automatic) ASTM D Superpave EN pdf (230V) Effect of Heat & Air by Rotating Flask - RFT (manual) EN IP pdf (230V) Effect of Heat & Air by Thin-Film Oven - TFOT & Loss on Heating (manual) ASTM D EN (NF T obs.) - IP JIS K2207 ASTM D 6 (AASHTO T47 obs.) - EN (IP 45, NF T obs.) - IP JIS K _LOH.pdf _TFOT.pdf (230V) (115V) Paraffin Content by Distillation (manual) EN (DIN obs.) - IP pdf (230V) Distillation of Pitch see: Distillation 10 Distillation of Cut-Back Bitumen - ASTM Type (manual) ASTM D 402 (AASHTO T79 obs.) - EN (NF T obs.) - IP pdf (Gas) Distillation of Cut-Back Bitumen - DIN Type (manual) DIN pdf (Gas) Distillation of Road Tar / Bitumen - ASTM Type (manual) ASTM D 20 - (ASTM D 246 obs.) pdf (Gas) Distillation of Road Tar / Bitumen - DIN Type (manual) DIN pdf (Gas) Water Content by Asphalt Distillation - ASTM (manual) ASTM D AASHTO T 59 - IP 291 (BS 434 obs.) - available with flask heating mantle ( ) pdf (230V) (115V) (230V) (115V) 37
38 Bitumen Testing 9 Water Content by Bitumen Distillation - DIN (manual) DIN available with flask heating mantle ( ) Viscosity by Flow Cups pdf (230V) (115V) (230V) (115V) see: Viscosity Viscosity, Specific by ENGLER (semi-automatic) ASTM D JIS K2208 IP 212 (DIN obs.) pdf (230V) Viscosity, Apparent by Road & Tar Viscometer (manual) EN single-unit - electrically heated - test cups with different orifices Viscosity by Rotational Viscometer - RV ASTM D AASHTO TP 48 - SHRP Superpave EN Viscosity by Dynamic Shear Rheometer - DSR SHRP B AASHTO TP 5 - ASTM P SHRP Superpave EN (NF T obs.) Aging by Pressure Aging Vessel - PAV (automatic) ASTM D AASHTO MP1 - AASHTO PP 1 - SHRP Superpave (ASTM PS 36 obs.) AASHTO R28 - AASHTO MP 1 - AASHTO PP 1 Stiffness by Bending Beam Rheometer - BBR (automatic) SHRP B AASHTO TP 1 - ASTM P SHRP Superpave ASTM D EN NF T pdf (230V) (115V) pdf (230V) pdf (230V) pdf (230V) (115V) pdf (230V) (115V) 12 Flash-Point by TAG Open Cup see: Flash-Point Penetration - PNR 12(digital) ASTM D 5 - EN IP 49 - JIS K standard needles (precision made, factory or officially certified) - ball shaped penetrator - optional cone pdf ( V) 40 Texture by Rheotex Analyzer - PNR 21 see: Penetration 38
39 Thermometer Calibration Fluid - Metal Specimen Thermometers Thermometers ASTM / IP - precision made - officially certified - with or without collar pdf (ASTM) pdf (IP) Calibration Fluids Calibration Fluids & Reference Liquids are available for the following methods: - Boiling Characteristics - Coking Tendency by MCRT - Cloud & Pour Point - CFPP - Freezing Point - Cold Cranking Simulator - Density - Distillation Determination - Effect of Liquids on Rubber - Flash-Point Determination - Fuel Testing - FZG - Gear Test - Multi-Test Verification Material (MTVM) for Bitumen, Gas Oil, Kerosine, Motor Gasoline - Noack Evaporation Test - Physical Properties - Predicting the Borderline Pumping Temperature of Engine Oil - Salts in Crude Oil - Shear Stability - Viscosity - Viscosity at Low Temperature by BROOKFIELD Viscometer pdf (Density) pdf (Distillation) pdf (Flash-Point) pdf (Friction Wear) pdf (Fuel) pdf (Miscellaneous) pdf (MTVM, STVM) pdf (Oil) pdf (Viscosity) Metal Test Specimens Metal Test Specimens Group Rust Preventives Group Fuels and Fuel Additives Group Solid Film Lubricants Group Antifreeze and Soluble Oils Group Lubricating Oils and Hydraulic Fluids Group Specimens for Special Testing pdf (Antifreeze) pdf (Fuel) pdf (Lubricating) pdf (Rust) pdf (Solid) pdf (Special) 39
40 Penetration & Texture Testing Texture by Rheotex Analyzer - PNR 21 (digital) ASTM, IP, ISO, EN, DIN etc. depending on accessories - control and programming software PNRcon - Force & Tensile measurement - additional test-accessories on user's choice pdf (230V) (115V) Penetration by Penetrometer - PNR 12 (digital) ASTM, IP, ISO, EN, DIN etc. depending on accessories - multi-purpose use - test-accessories on user's choice - microprocessor controlled with LCD pdf ( V) Penetration by Penetrometer (analog) ASTM D 5 - ASTM D ASTM D ASTM D ASTM D AASHTO T49 - DIN EN IP 49 - IP 50 - IP IP IP ISO JIS K DAB 10-V SHELL SMS pdf Penetration Accessories - Test Combinations sets according standard requirements incl. needle/cone, plunger, weight, sample container etc. Penetration Accessories - Plunger & Weight Penetration Accessories - Needles Penetration Accessories - Cones & Discs Penetration Accessories - Rods & Rams Penetration Accessories - Sample Jars Penetration Accessories - Sample Tempering Units Penetration Accessories - Test Kits pdf pdf pdf pdf pdf pdf pdf 35 Penetration Accessories - Grease Worker pdf pdf Penetration by Pocket Penetrometer (Field Test) pdf
41 Various Equipment Bending & Breaking Stress - BBS 5 (automatic) BBS 5 - Standard Temperature Model Temperature Range: max. approx. -46 to +60 C pdf (230V) (115V) BBS 5H - High Temperature Model Temperature Range: max. approx. -46 to +100 C pdf (230V) (115V) BBS 5C - Climatic Cabinet Model Temperature Range: depending on climatic cabinet pdf (230V) (115V) Water Content by KARL-FISCHER Titration (automatic) ASTM D ASTM D ASTM D ASTM D EN EN IP IP ISO ISO pdf (90-264V) Water Content by Distillation - DEAN & STARK (manual) ASTM D 95 - AASHTO T55 - EN IP 74 - JIS K available with flask heating mantle ( ) Water Content by Distillation - DEAN & STARK (extended) ISO 3733 (also ASTM D 95 - AASHTO T55 - EN IP 74 - JIS K2275 ) - available with flask heating mantle ( ) Water Content by Distillation - ASTM (manual) ASTM D IP ISO JIS K available with flask heating mantle ( ) Water Content by Distillation - ASTM (manual) ASTM D AASHTO T59 - IP available with flask heating mantle ( ) Water Content by Distillation - DIN (manual) DIN available with flask heating mantle ( ) pdf (230V) (115V) (230V) (115V) pdf (230V) (115V) (230V) (115V) pdf (230V) (115V) (230V) (115V) pdf (230V) (115V) (230V) (115V) pdf (230V) (115V) (230V) (115V) 41
42 Various Equipment Water Content by Distillation - DIN (manual) DIN available with flask heating mantle ( ) Solidification-Point-Apparatus (manual) ASTM D pdf (230V) (115V) (230V) (115V) pdf Refractive Index & Dispersion by Universal ABBE Refractometer (manual) DIN pdf (230V) (115V) Refractive Index & Dispersion by Modified ABBE Refractometer (manual) ASTM D ASTM D DIN ISO JIS C2101 (ASTM D 2159 obs.) pdf (230V) (115V) Refractive Index by High Performance Refractometer - ABBEMAT (automatic) HP for substances with a low refractive index WR for substances with a high refractive index Refractive Index by Hand Refractometer - Eclipse (manual) (Field Test) ASTM D JIS C2101 for BATTERY ( ), FUEL ( ) & AVIATION ( ) samples Refractive Index by Refractometer - RFM 340 (automatic) ASTM D JIS C pdf (100/240V) (100/240V) pdf pdf
43 Tables of Contents Title Order Numbers Standards
44 Title A Aging by Pressure Aging Vessel - PAV (automatic) Aging Stability by Baader (manual) Air Release Value by Impinger (semi-automatic) Aniline Point - Method A (Test Tube) (manual) Method B (Thin Film) (manual) Method D (U-Tube) (manual) Method E (automatic) Ash by Muffle Furnace (manual) Asphaltenes by Extraction... 19, 21 Auto-Ignition Temperature (semi-automatic)... 13, 15 Auto-Ignition Temperature - ZPA 3 (automatic)... 12, 15 Auto-Ignition Temperature of Solids acc. Grewer (semi-automatic)... 13, 15 B Bending & Breaking Stress - BBS 5 (automatic) Breaking Point by FRAASS (manual) Breaking Point by FRAASS - BPA 5 (automatic) Burning Quality by Lamp Method (manual) C Calibration Fluids & Reference Liquids Centrifuge... 22, 24 Cloud and Pour Point - CAPP (manual) CAPP I (semi-automatic) CAPP V (semi-automatic) Coking Tendency - Carbon Residue CONRADSON Carbon Residue (manual) Micro Carbon Residue - MCR-210 (manual) Panel Coking (manual) RAMSBOTTOM Carbon Residue - RCRT (manual) Cold Filter Plugging Point - CFPP (manual) Color - ASTM-Scale Comparator (manual) Colorimeter - PFX 195/2 (automatic) Colorimeter - PFX 880/P (automatic) Colorimeter - PFX 995/P (automatic) SAYBOLT-Scale Chromometer SAYBOLT-Scale Chromometer (manual) Compatibility of Elastomer or Rubber with Lubricating Fluids & Greases Conductivity - Field Method - DCM (manual) (Field Test) Field Method - MLA (manual) (Field Test) Lab Method - Precision (automatic) Congealing Point by Rotating Thermometer (manual) Contamination by Diaphragm Filtration (manual) C Corrosion - Copper Strip (manual) Copper Strip Tarnish Test (manual) Copper Strip Test (manual) Silver Strip Test (manual) of Engine Coolants (manual) Corrosion Preventing Characteristics - Chip & Filterpaper Test (manual) HERBERT Corrosion Test (manual) Corrosion Preventive Properties - EMCOR (manual) D - Run-In Stand (manual) Deleterious Particle Content by Estimation (manual) Demulsibility Characteristics (manual) Demulsibility Characteristics by HERSCHEL Stirring Method (semi-automatic) Demulsification Number (manual) Density Balance... 6, 15 Density or Relative Density - Pressure Hydrometer (manual) SCHILLING Effusiometer (manual) Gases by SCHILLING Effusiometer Light Hydrocarbons by Pressure Hydrometer... 6 Depentanization by PONA... 15, 21 Distillation at Atmospheric Pressure - ADU 4-DryPoint (automatic) ADU 4 (automatic) DU 4-Economy (manual) DU 4-Professional (manual) Distillation of Cut-Back Bitumen - ASTM Type (manual) DIN Type (manual) Pitch... 10, 37 - Road Tar / Bitumen - ASTM Type (manual) Road Tar / Bitumen - DIN Type (manual) Dropping Point (manual) Dropping Point by Wide Temperature Range (manual) Dryness by Freeze Valve (manual)
45 Title E Effect of Heat & Air - Rolling Thin Film Oven Test Method - RTFOT (semi-automatic) 37 - Rotating Flask - RFT (manual) Thin-Film Oven - TFOT & Loss on Heating (manual) Evaporation Loss - NOACK - VP 4000 (automatic) F - Wide-Temperature Range (manual) of Lubricants (manual) Flash-Point Testing - Sample Changer with PMA 4 (automatic) Closed/Open Cup acc. RAPID Tester Series 3 (automatic) Closed/Open Cup acc. RAPID Tester Series 7 & 7+ (autom.) Closed Cup acc.pensky-martens - PM (manual) Closed Cup acc. ABEL (semi-automatic) Closed Cup acc. ABEL - ABA 4 (automatic) Closed Cup acc. PENSKY-MARTENS - Army Check (manual) Closed Cup acc. PENSKY-MARTENS - PMA 4 (automatic) Closed Cup acc. PENSKY-MARTENS - PMP 4 (semi-autom.) Closed Cup acc. PENSKY-MARTENS - PM 4 (semi-automatic) Closed Cup acc. TAG (semi-automatic)... 12, 15 - Closed Cup acc. TAG - TAG 4 (automatic)... 11, 15 - Open Cup acc. TAG (semi-automatic)... 12, 15, 38 Flash- & Fire-Point Testing - Open Cup acc.cleveland (manual) Open Cup acc. CLEVELAND - CL (semi-automatic) Open Cup acc. CLEVELAND Open Cup - CLA 4 (automatic) Flock Point (manual) Flow Pressure by KESTERNICH (manual) Fluidity by U-Tube Method (manual) Fluorescent Indicator Adsorption - FIA... 15, 21 Foaming Characteristics - Quadruple (manual) Foaming Tendencies of Engine Coolants (manual) Freezing Point (manual) Freezing Point of Antifreeze Solutions (manual) Friction & Wear by REICHERT M2 (manual) G Gasoline Diluent of Engine Oil by Distillation (manual) Grease Penetration by Cone - PNR 10 (digital) Grease Penetration by Cone - PNR 12 (digital) Grease Working - Grease Worker Slave (manual) Machine (automatic) Micro-Grease Worker Quarter-Cone (manual) Micro-Grease Worker SHELL-Cone (manual) GUM by Jet Evaporation (manual) H Heat of Combustion by Calorimeter - C 2000 (automatic) Hydrogen Sulfide in Liquefied Petroleum (manual) Hydrolytic Stability by Beverage Bottle (manual) Hydrometer - API Specific Gravity - ASTM E I - ASTM Specific Gravity - ASTM E Density - Series L 50 SP Density - Series L 50 SP Density - Series M 50 SP DIN Series M Specific Gravity - Series L 50 SP Specific Gravity - Series M 50 SP (Thermo-), Specific Gravity - ASTM 101H... 6 Insoluble Matters & Total Contamination by Diaphragm Filtration L Lead & Salt by Hot-Extraction - TEL... 16, 21 Lead in Gasoline - Iodine Monochloride Method... 16, 21 Leakage Tendencies - LNF-2 (automatic) Leakage Tendencies by High Temperature (manual) Low-Temperature Torque (automatic) Lube Oil - VARIO Check (Field Test) Lubrication & Load Capability by BRUGGER (manual) Lubricity by the High-Frequency Reciprocating Rig - HFRR M Melting Point - Cooling Curve (manual) Melting Point - Drop (manual) Mercaptan by Doctor-Test... 19, 21 Mercaptan Sulfur by ph-meter (manual) Metal Test Specimens Mineral Oil & Soap Content by Dialysis (manual) N Neutralization Number - Color-Indicator Titration (manual) O - Color-lndicator Titration (Acid & Base No.) - TAN & TBN Potentiometric Titration (Acid & Total Base No.) - TAN & TBN Oil Content (manual) Oil Content of Water Mixed Cooling Lubricants by Acidification & Saponification (manual) Oil Separation by Conical Sieve (manual) Oil Separation During Storage - ASTM (manual) Oil Separation During Storage - DIN/IP (manual)
46 Title O Oxidation Characteristics - TOST/TOO Dry-Heat - ASTM (manual) TOST/TOO Dry-Heat - DIN (manual) TOST/TOO Liquid- ASTM D 2893 (manual) TOST/TOO Liquid - ASTM D 943 (manual) Oxidation Stability & Corrosiveness (manual) Oxidation Stability - BAM 200, BAM , 28 P - BAM Dry-Heat (manual) BAM Liquid (manual) Dry-Heat Bath Safety Test Arrangement - OBA 2/T Dry-Heat Bath Test Arrangement - OBA 1/T Liquid Bath Safety Test Arrangement - OBA Liquid Bath Test Arrangement - OBA OBA (semi-automatic) OFA (manual) of FAME - PetroOXY (automatic) Rotating Bomb - RBOT (automatic) Rotating Bomb - RBOT (semi-automatic) Paraffin Content by Distillation (manual) Particulates & Filter Membrane Color Ratings by Aviation Fuel Contamination Sampler - AFCON... 19, 21 Particulates & Free Water... 19, 20 Particulate Contamination in Aviation Fuel by Laboratory Filtration PCB-Content - PCB Check (Field Test) Penetration - PNR 12(digital) Penetration Accessories - Cones & Discs Grease Worker Needles Plunger & Weight Rods & Rams Sample Jars Sample Tempering Units Test Combinations Test Kits Penetration by Penetrometer - analog PNR 12 (digital) PNR 21 (Rheotex) Pocket Penetrometer (Field Test) ph-value by ph-meter (manual) Pycnometer - GAY-LUSSAC HUBBARD LIPKIN... 6 R Refractive Index & Dispersion by - Modified ABBE Refractometer... 16, 42 - Universal ABBE Refractometer... 16, 42 Refractive Index Hand Refractometer - Eclipse... 16, 42 High Performance Refractometer - ABBEMAT... 16, 42 Refractometer... 30, 42 Refractometer - RFM 340 (automatic)... 16, 42 Resistance by Philipp Test (manual) Resistance to Water Spray Roll-Stability of Lubricating Grease (semi-automatic) Rust Preventing by Chip & Filter (manual) Rust Preventing Characteristics - TOR (semi-automatic) Rust Protection by Humidity Cabinet (manual) S Salts by Conductivity (electrometric) - Salinometer Portable (manual)... 19, 21 Salts by Conductivity (electrometric) - Salinometer SCO 1 (manual)... 19, 21 Sampling - Devices Tubes - closed Tubes - open Tubes - open (Grease)... 4 Saponification Number (manual) Sediment, Total (manual) Sediment by Extraction... 19, 22 Shear Stability by Diesel Injector Rig (manual) Shear Stability of Polymer-Containing Oils and Hydraulic Fluids - Sonic (semi-automatic) Smoke Point by Lamp Method (manual) Softening Point - KRAEMER-SARNOW (manual) Ring & Ball (manual) Ring & Ball - RKA 5 (automatic) WILHELMI (manual) Solidification-Point-Apparatus (manual) Solidity & Turbidity Point (manual) Stability - Oil / Layer Separation (manual) Thermal for Jet Fuel (manual) Stiffness by Bending Beam Rheometer - BBR (automatic) Sulfonation Number by Shaking Machine (manual)
47 Title S Sulfur & Chlorine - Active... 20, 26 T - GROTE-KREKELER (manual) High Temperature (manual) Pressure Vessel (manual) WICKBOLD Combustion... 19, 20 - Raney-Nickel (manual) SCHÖNIGER (Thorin-Titration) (manual) Tank Sampling Bottles... 4 Tank Sampling by Scoop-Thermometer... 4 Tempering Baths - Density, API & Specific Gravity Viscosity - Kinematic Capillary Methods Viscositytubes - Ambient Temperature Viscositytubes - High Temperature... 7 Tensile Properties - Force-Ductilometer Method - DDA 3 (automatic) Tensiometer - Digital (semi-automatic) Processor (automatic) Scale (manual) Texture by Rheotex Analyzer - PNR , 40 Thermometers Total Dirt by Refrigerated Centrifuge (semi-automatic) Total Sediment Tensile Properties - Ductilometer Method - DD 3 (semi-autom.) U Unsulfonated Residue of Plant-Spray-Oil by Combined Shaking Machine (manual) V Vapor Pressure (manual) Vapor Pressure Analyzer (automatic) Vapor Pressure Analyzer - PetroVap II (automatic) Vapor Pressure by REID (manual) Viscometer - BS/IP - BS/IP/SL(S) (Suspended Level) BS/IP U-Tube - BS/IP/RF (Reverse Flow) CANNON-FENSKE Opaque - CFOV (Reverse Flow) CANNON-FENSKE Routine - CFRV (Ostwald) CANNON-UBBELOHDE Semi-Micro - CUSMV (Suspended Level) Micro-OSTWALD - MOV (Ostwald) UBBELOHDE ASTM-Type - UAV (Suspended Level) UBBELOHDE DIN-Type - UDV (Suspended Level) UBBELOHDE Micro Viscometers - UMV (Suspended Level) Vacuum - CMVV, AIVV, MKVV... 8 V Viscometer - ZEITFUCHS Cross-Arm - ZCAV (Reverse Flow) Apparent by Road & Tar Viscometer (manual) High Temperature & High Shear Rate by Tapered-Plug Viscometer - HTHS (semi-automatic) Oil Standards Specific by ENGLER Specific by ENGLER (semi-automatic) Brookfield (semi-automatic) Comparator - Viscosity Check Comparator - Viscosity Check (Field Test) Dynamic Shear Rheometer - DSR Falling Ball - HÖPPLER (manual) Falling Ball - JUNG Check Falling Ball - JUNG Check (Field Test) Flow Cups Flow Cup - FORD (manual) Flow Cup - ISO (manual) REDWOOD (manual) Rotational Viscometer - RV SAYBOLT (manual) UBBELOHDE ASTM/DIN Capillary - ViscoClock (semi-autom.) UBBELOHDE Capillary - AKV (automatic)... 7 Volatility & Residue by Propane Residue (Mercury Freeze Method) (manual) W Water & Sediment by Centrifuge (semi-automatic)... 19, 22 Water Content - Asphalt Distillation - ASTM (manual)... 30, 37 - Bitumen Distillation - DIN (manual)... 30, 38 - Distillation - ASTM (manual)... 30, 41 - Distillation - ASTM (manual)... 30, 41 - Distillation - DEAN & STARK (extended)... 30, 41 - Distillation - DEAN & STARK (manual)... 30, 41 - Distillation - DIN (manual)... 30, 41 - Distillation - DIN (manual)... 30, 42 - KARL-FISCHER Titration (automatic)... 30, 41 Water in Oil - WIO Check (Field Test) Water Reaction by Mixing Cylinder (manual) Water Separation Characteristics by Micro-Separometer (semi-automatic) (Field Test) Water Vapor Content by Dew-Point (manual) Water Washout Characteristics - Dynamic Test (manual) Water Washout Characteristics - Static Test (manual) Wear Characteristics - FALEX Pin & Vee Block (manual) SHELL - Four-Ball Machine (manual) TIMKEN-Test (manual) FZG Gear Oil Rig (manual)
48 Order Numbers (230V) (230V) (115V) (230V) (230V) (115V) (Gas) (230V) (Gas) (230V) (Gas) (Gas) (230V) (115V) (230V) (115V) (230V) (115V) cm (230V) (115V) cm (230V) (115V) cm (230V) (115V) cm (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (230V) (230V) (115V) (115/230V) (230V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (115/230V) (115/230V) (115/230V) (115/230V) (115/230V) (Gas) (Gas) (115/230V) (230V) (115V) (115/230V) (115/230V) (115/230V) (115/230V) (115/230V) (230 V) (230V) (110V) (230V) (230V) (115/230V) (115/230V) (230V) (115V) (230V) (with EU-plug) (with US-plug) (with EU-plug) (with US-plug) (with EU-plug) (with US-plug) (with EU-plug) (with US-plug) (230V) (230V) (115V) (DIN) (ASTM) (230V) (115V) (230V) (115V) (115V) (230V) (Battery) ( 180 bar) ( 180 bar) (230V) (115V) (220V) (110/230V) (Battery) (230V) (230V) (230V) (115V) (115V) (230V) (230V) (230V) (Gas) (Gas) (Gas) (230V) (115V) (230V) (115V) (230V) (230V) (115V) (230V) (230V) (115V) (230V) (115V) (230V) (115V) (Battery) (230V) (230V) (115V) (230V) (115V) (230V) (100/240V) (100/240V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (230V) (115V) (230V) (230V) (115V) (230V) (230V) (230V) ( V) (115/230V) (230V) (Battery) (230V) (230V) ( F) ( C) (230V) (115V) (230V) (380V) (440/480V) (380/415V) (230V) (230V) (115V) (380V) (230V) (230V) (230V) (230V) (230V) (230V) (115V) (230V) (115V) (115V) (230V) (115/230V) (230V) (115V) (230V) (115V) (230V) (115V) (380V) (115V) (230V) (230V) (115V) (115V) (230V) (230V) (115V) (230V) (115V) (230V) (230V) (115V) (115V) (230V) (230V) (115V) (230V) (230V)... 37, (230V)... 38, (230V) (230V)
49 Order Numbers (230V) (230V) (230V) (230V) (115V) (230V) (230V) (3x 220V) (230V) (115V) (230V) (115V) (230V) (115V) (115V) (115V)... 37, (115V)... 38, (115V) (115V) (115V) (115V)... 37, (115V)... 38, (115V) (115V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115/230V) (115/230V) (230V) (230V)... 37, (230V)... 38, (230V) (230V) (230V) (115V) (230V) (90-264V) (230V) (230V) (115V) (230V) (115V) (230V) (115V) (115/230V) (115/230V) (115/230V) (115/230V) (115/230V) (230V) (115V) (115V) (230V) (230V) (115V) (230V) (230V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (230V) (230V) (230V) (115V) (230V) (230V) (230V) (230V) (230V) (230V) (230V) (115V) (230V) (115V) (230V) (115V) (230V) (230V) (230V) (230V) (230V) (230V) ( V)... 35, 38, (230V) (115V) (BACON) (Can) (Glas) (Auger) (ASTM) (DIN) (230V) (115V) (230V) (115V) (230V) (230V) (230V) (230V) (115V) (DIN) (ASTM) (ISO) (manual) (manual) (manual) (manual) (230V) (115V) (manual) (manual) (automatic) (automatic) (manual) (manual) (automatic) (manual) (automatic) (manual) (230V) (115V) (Secondary) (Primary) (230V) (230V) (115V) (230V) (115V) (115/230V) (IP) (ISO) (115/230V) (230V) (220/240V) (230V)
50 Standards American Standards AASHTO AASHTO MP AASHTO PP AASHTO R AASHTO T47 (obs.) AASHTO T , 13 AASHTO T AASHTO T AASHTO T AASHTO T , 41 AASHTO T , 41 AASHTO T AASHTO T AASHTO T79 (obs.) AASHTO T AASHTO T AASHTO T AASHTO TP AASHTO TP ASTM ASTM D , 40 ASTM D ASTM D ASTM D ASTM D , 12 ASTM D , 6 ASTM D , 6 ASTM D ASTM D ASTM D ASTM D ASTM D , 13 ASTM D 93-A+B... 11, 12, 13 ASTM D 94-A ASTM D ASTM D 96 (obs.) ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D , 24 ASTM D ASTM D ASTM D , 40 ASTM D ASTM D , 41 ASTM D 246 (obs.) ASTM D 270 (obs.)... 4 ASTM D ASTM D ASTM D ASTM D 323-A-B-D ASTM D ASTM D ASTM D , 8 ASTM D , 8 ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D 526 (obs.) ASTM ASTM D ASTM D 611-A+B+D+E ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D 892 (seq. I-III) ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D , 40 ASTM D ASTM D ASTM D ASTM D ASTM D , 40 ASTM D ASTM D ASTM D 1478 (obs.) ASTM D ASTM D , 24 ASTM D ASTM D ASTM D ASTM D 1590 (obs.) ASTM D , 14 ASTM D 1661 (obs.) ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D 1935 (obs.) ASTM D 1989 (obs.) ASTM ASTM D ASTM D ASTM D ASTM D ASTM D 2159 (obs.) ASTM D ASTM D , 8 ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D 2547 (obs.) ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D 3278-A+B ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D 3828-A+B ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM ASTM D ASTM D ASTM D ASTM D ASTM D 4739 (alternative).. 30 ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D , 34 ASTM D ASTM D , 16 ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D 5800-B ASTM D ASTM D ASTM D , 24 ASTM D 6082 (seq. IV) ASTM D ASTM D ASTM D , 24 ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D , 12, 13 ASTM D ASTM D ASTM E ASTM E ASTM E ASTM E 308 (obs.)... 23, 24 ASTM E ASTM E ASTM P ASTM P ASTM PS 36 (obs.)
51 Standards British Standards FTM FTM , 12, 13 FTM FTM (obs.)... 23, 24 FTM FTM FTM , 8 FTM FTM FTM FTM FTM (obs.) FTM FTM , 12 FTM , 12, 13 FTM , 13 FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM FTM BS BS BS 434 (obs.) BS , 12, 13 BS 2634 (obs.) BS BS 3900-A BS 4347 (obs.) BS 4348 (obs.) BS 4351 (obs.) BS 4380 (obs.) BS 4382 (obs.) BS 4385 (obs.) BS 4388 (obs.) BS 4451 (obs.) BS 4454 (obs.) BS 4456 (obs.) BS 4457 (obs.) BS 4458 (obs.) BS BS 4699 (obs.)... 5, 6 BS 4714 (obs.)... 5 BS 5088 (obs.) BS BS IP IP 2-A+B+D+E IP IP IP IP IP IP IP 17-A+B IP IP IP IP IP 34-A+B... 11, 12, 13 IP 35 (optional) IP , 13 IP IP IP 45 (obs.) IP , 28 IP , 40 IP , 40 IP 51 (obs.)... 4 IP IP IP IP IP 59-A+B (obs.)... 6 IP 59-C (obs.) IP IP IP 69-A-B-D IP 70 (obs.)... 9 IP , 8 IP IP 75 (obs.) IP IP IP IP 96 (obs.) IP IP IP IP , 28 IP IP IP IP IP IP IP IP IP IP IP IP IP IP IP IP , 6 IP IP IP , 12 IP IP , 40 IP IP IP IP , 6 IP IP IP , 24 IP IP IP IP IP IP IP 227 (obs.) IP IP IP IP IP IP IP 248 (obs.) IP 263 (similar) IP IP 267-B IP IP IP IP IP IP IP IP IP IP IP , 40 IP IP IP , 8 IP IP IP IP IP IP IP 359 (obs.) IP IP , 40 IP IP IP 390-A IP IP IP IP IP IP IP IP IP IP IP IP IP IP IP , 12 IP , 12 IP IP IP IP IP IP IP
52 Standards German Standards French Standards European Standards DIN DIN 1995 (obs.)... 5, 6, 36 DIN , 41 DIN DIN DIN DIN DIN DIN DIN DIN DIN , 28 DIN DIN DIN , 28 DIN DIN DIN DIN DIN DIN (obs.)... 8 DIN , 28 DIN DIN DIN DIN DIN DIN (obs.) DIN DIN (obs.) DIN DIN , 24 DIN DIN (obs.) DIN DIN (obs.) DIN DIN DIN (obs.)... 8 DIN DIN DIN DIN DIN (obs.) DIN (obs.)... 7 DIN DIN DIN (obs)... 7 DIN (obs.) DIN DIN DIN (obs.) DIN (obs.)... 23, 24 DIN , 40 DIN DIN (obs.) DIN DIN (obs.) DIN DIN (obs.) DIN (obs.) DIN DIN DIN DIN DIN DIN DIN DIN (obs.) DIN DIN (obs.) DIN (obs.) DIN (obs.) DIN DIN (obs.) DIN (obs.) DIN DIN (obs.) DIN DIN DIN (obs.) DIN DIN DIN DIN (obs.) DIN (obs.) DIN DIN DIN DIN DIN DIN , 6 DIN , 8 DIN (obs.) DIN (obs.) DIN (obs.) DIN DIN DIN DIN DIN DIN DIN (obs.)... 4 DIN (obs.) NF FD M NF M , 24 NF M NF M (obs.) NF M NF M NF M NF M NF M (obs.) NF M (obs.) NF M NF T NF T NF T (obs.)... 9 NF T (obs.)... 7, 8 NF T (obs.)... 23, 24 NF T NF T (obs.) NF T NF T NF T (obs.) NF T (obs.) NF T (obs.) NF T , 12 NF T (obs.) NF T (obs.) NF T (obs.) NF T NF T EN EN 10 (obs.) EN EN EN 535 (obs.)... 9 EN , 12 EN EN EN EN EN 1871-F EN EN EN , 8 EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN (obs.)... 11, 12, 13 EN EN EN (obs.) EN EN EN EN A-B-C
53 Standards International Standards Japanese Standards International Standards ISO ISO ISO , 12 ISO , 12 ISO ISO , 24 ISO 2083 (obs.) ISO , 40 ISO , 18 ISO ISO ISO ISO , 13 ISO 2719-A+B... 11, 12, 13 ISO 2908 (obs.) ISO 2977-A+B+D+E ISO ISO 3007-A-B-D ISO ISO ISO ISO ISO ISO , 8 ISO , 8 ISO ISO ISO ISO , 12 ISO , 12 ISO ISO ISO ISO ISO ISO , 6 ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO , 28 ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO , 12 ISO ISO , 12, 13 ISO ISO JIS JIS C , 26, 27, 30, 42 JIS K , 7-9, 23, 36-38, 40 JIS K JIS K , 29, JIS K JIS K , 34, 35 JIS K , 20 JIS K JIS K JIS K , 6 JIS K , 10 JIS K JIS K JIS K JIS K , JIS K JIS K JIS K JIS K JIS K , 17, 21 JIS K JIS K , 8 JIS K JIS K JIS K JIS K , 32 JIS K JIS K JIS K , 28 JIS K JIS K JIS K JIS K JIS K JIS K JIS K JIS K JIS K , 24 JIS K , 22, 25 Abbreviations API API CEC L-07-A CEC L-14-A CEC L-36-A CEC L-40-A CEC L-45-T CEI CFR DAB 10-V , 40 DIS 3658 (obs.)... 6 MIL-G NAC TM PV PV PV SHELL SMS , 40 SHRP SHRP SHRP SHRP B SHRP B SIS (obs.) Superpave... 11, 13, 37, 38 UN Class 3 L UN Class 3 N USEPA SW VDI VV-L-791e /831/EWG 12, 13 AASHTO.. American Association of State Highway & Transportation Officials API... American Petroleum Institute ASTM... American Society for Testing & Materials BS... British Standards Institution CEC... Coordinating European Council (for Transportation Fluids Performance) DIN... Deutsches Institut für Normung EN... Comité Européen de Normalisation FTM... Federal Test Method (US) IEC... International Electrotechnical Commission IP... Institute of Petroleum Standards ISO... International Standardization Organisation JIS... Japanese Industrial Standards Committee MIL... Military Standards (US) NF... Institut Française de Normalisation SAE... Society of Automotive Engineers (US) SHRP... Strategic Highway Research Program (US) 53
54 54
55 You need more details? The complete product range will be found on our HOMEPAGE where it will be updated immediately. Search - Functions: Search by Title, Standard, Order Number, or Product- & User Group. Leaflets: Available leaflets as PDF-download files. Occasions: Are you looking for a bargain? You may find a previous model or a demo-unit here. A complete set of the detailed datasheets is available on CD, as a PDF-catalog. Our catalog includes a comfortable searchfunction and PDF-files of our leaflets. 55
56 Manufacturer of Petroleum Test Equipment since 1873 Petrotest Building Development ISO 9001 certified processes......consolidated at Petrotest! Production Quality Control Storage Training Presented by: We reserve the right of changes without prior notice /02 Ludwig-Erhard-Ring Dahlewitz - Germany Tel.: +49 (0) / Fax: +49 (0) / info@petrotest.com Website:
Manufacturer since 1873
Manufacturer since 1873 www.petrotest.com Contact Company Development Mail: Petrotest Instruments GmbH & Co KG Ludwig-Erhard-Ring 13 15827 Dahlewitz Germany From Berthold Pensky... In 1873, Mr. Berthold
More informationManufacturer since 1873
Manufacturer since 1873 www.petrotest.com Contact Company Development Mail: Petrotest Instruments GmbH & Co. KG Ludwig-Erhard-Ring 13 15827 Dahlewitz Germany From Berthold Pensky... In 1873, Mr. Berthold
More informationPetroleum Test Instruments Product Range
Petroleum Test Instruments Product Range Fall 2012 www.petrotest.com Company Information From Berthold Pensky... In 1873, Mr. Berthold Pensky, an engineer at the Kaiser-Wilhelm- Institut in Berlin-Dahlem,
More informationSoftening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer
Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer Distillation of petroleum Melting point of petroleum wax Precipitation number of lubricating oils Saponification
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
More informationSCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION InnoTech Alberta Inc.
More informationInstruments for the Analysis of Petroleum Products. Oxidation Stability
Instruments for the Analysis of Petroleum Products Oxidation Stability What is Oxidation Stability? Oxidation stability describes the resistance of a material towards oxygen. This is a basic requirement
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Prenton Way Contact: Dr J Roberts North Cheshire Trading Estate Tel: +44 (0)151 649 9955 Prenton Fax: +44 (0)151 649 9977 Wirral E-Mail:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
More informationCoefficient of Friction of Lubricants D 5707 p. 69 Coking Value D 4715 p. 70 Cold Cranking Simulator Manual Method D 2602 p. 71 Automatic Method--see
Introduction p. 1 Explanation of Terms p. 2 Test Method Equivalence p. 3 Alphanumeric Index of Standards p. 5 Acid Number Colorimetric Titration--see also Base Number, p. 43 D 974 p. 11 Potentiometric
More informationStandard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
More informationSavant Labs Laboratory Testing Services. Tests by Method
ASTM D86 Distillation 400 ml ASTM D92 Fire Point, Cleveland Open Cup 250 ml ASTM D92 Flash Point and Fire Point, Cleveland Open Cup 250 ml ASTM D92 Flash Point, Cleveland Open Cup 250 ml ASTM D93 Flash
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
More informationAnnex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
More informationInstruments for Chemical and Petroleum Products. Flash Point
Instruments for Chemical and Petroleum Products Flash Point A Tradition of Competence 140 years of technological advances lie between the first flash point tester and today s Anton Paar product line of
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
More informationA SURVEY OF OUR KNOW-HOW : PETROLEUM GLASSWARE VISCOMETER TUBES
N O R M A L A B A N A L I S A SURVEY OF OUR KNOW-HOW : PETROLEUM GLASSWARE VISCOMETER TUBES NORMALAB ANALIS FRANCE S.A. 14, rue des Lilas 76210 LINTOT - FRANCE Tel : (33) 02 35 38 59 59 Fax : (33) 02 35
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18436-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 22.01.2018 to 28.10.2019 Holder of certificate: ISP
More informationPMA 5. Pensky-Martens Flash Point Tester. ::: Volatility... Flammability
PMA 5 Pensky-Martens Flash Point Tester ::: Volatility... Flammability A Tradition of Competence 140 years of developing, producing and supporting excellent flammability instruments. 140 years of technology
More informationScientific glass blowing
Scientific glass blowing Normalab France S.A.S. is specialized in the scientific glass blowing since the beginning of the company in 1963. Thanks to this experience of more than fifty years and a team
More informationASTM D4. Bitumen Content Qty. Model Description. Related Standards: ASTM D370, E177
ASTM D4 Related Standards: ASTM D370, E77 Bitumen Content H-550 Bitumen soluble in organic solvents set H-550. Gooch crucible H-550.2 Crucible holder H-550.3 Buchner funnel H-550.8 Glass fiber filter H-255
More informationASTM D4. Bitumen Content Qty. Model Description. Related Standards: ASTM D370, E177
ASTM D4 Related Standards: ASTM D370, E77 Bitumen Content H-550 Bitumen soluble in organic solvents set H-550. Gooch crucible H-550.2 Crucible holder H-550.3 Buchner funnel H-550.8 Glass fiber filter H-255
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More information10.6 Scope of Accreditation
Testing Laboratory Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration
More informationLABORATORY Viscometers
LABORATORY Viscometers www.irmeco.de Cannon-Fenske Routine Cannon-Fenske Routine Viscometer according to ASTM D445-446, ASTM D2515, ISO 3104-3105 used for quick and easy measurement of the viscosities
More informationALL TESTS. Density Oscillating U-tube method * IP 365. Distillation characteristics of petroleum products - Micro distillation method IP 596
Tests marked * are ISO17025 accredited ALL TESTS TEST NAME Density Oscillating U-tube * IP 365 Distillation characteristics of petroleum products - Micro distillation IP 596 Mercaptans, hydrogen sulphide,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical
More informationPRICE LIST 2017/2018
PRECISION PETROLEUM LABS, INC. 5915 STAR LANE HOUSTON, TX 77057 PRICE LIST 2017/2018 PH: 713-680-9425 Fax: 713-680-9564* WEBSITE: PRECISIONLABS.ORG FUEL TESTING Acidity as Acetic Acid D-1613 $65.00 Alcohol
More informationPrecision Thermometers for Material Testing
Precision Thermometers for Material Testing Precision thermometers acc. to ASTM, IP, BS, DIN, ISO, ANSI, AFNOR, S.T.P.T.C. For standardized material testing procedures such as mineral oil testing Catalogue
More informationParagon Scientific Ltd Proficiency Testing Scheme Schedule
Paragon Scientific Ltd Proficiency Testing Scheme Schedule Proficiency Testing Scheme Schedule Page 1 of 16 Issue : 29/01/2015 Print : 25/06/2018 Viscosity ASTM D445 - Standard Test Method for Kinematic
More informationFuel Related Definitions
Fuel Related Definitions ASH The solid residue left when combustible material is thoroughly burned or is oxidized by chemical means. The ash content of a fuel is the non combustible residue found in the
More informationTest Methods & Procedures Spec Numbers Description
METHODS & PROCEDURES Test Methods & Procedures Test Methods & Procedures Spec Numbers Description Air Release Value Minutes to 0.2% air @ 50 Aniline Point Anti-Wear Vane Pump Test 250 hours, 140 bar @
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 031 Issue date: 21 ugust 2018 ccredited to Unit 7 Prince William Drive
More informationSupply of Services for Detailed OEB Crude Assay Analysis
Tender Number [9900009229] Supply of Services for Detailed OEB Crude Assay Analysis SCOPE OF WORK SCOPE OF WORK 1. Introduction Orpic is the brand name for Oman Oil Refineries and Petroleum Industries
More informationREBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST 51858-2002 Characteristics Units Result Test Method Density (Specific Gravity) @ 20 C g /sm 3 0.870 ASTM D5002 Sulphur Content wt.% 1.8 ASTM D4294
More informationFoaming of Lubricating Oils (manual)
Foaming of Lubricating Oils (manual) ASTM D 892, ASTM D 6082 sequence IV, ISO 6247, DIN 51566, IP 146, JIS K2518, BS 5092 (obs.) Product group(s): User group(s): Scope: Lubricant Testing Automotive, Engine
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Nordic Camp Supply Kabul (HKIA) Fuel Testing
More informationInternational Quality Assurance Exchange Program Schedule. Fuel Month Number Type Dispatch Date Closing Date
Fuel 2018 Month Number Type Dispatch Date Closing Date January February March April May June July August September October November December M902 Motor Gasoline, Premium A372 Aviation Gasoline, 100LL D295
More informationL U B R I C A N T S & MATERIALS
PRODUCT GUIDE L U B R I C A N T S & MATERIALS TRUSTED BRANDS ERACHECK CFC-Free Oil-in-Water Testing by QCL-IR Technology Ultimate high-speed, precision solution for low, and sub- ppm concentrations of
More informationAlcor Petrolab Company Test List March 14, 2018 Item Description Sample Volume-ML Sample Volume-G
A-A-59173A-00 A-A-59173A 3.8 (Solidification @ -55 C / -67 F) 100 A-A-59173A-01 A-A-59173A 3.1 (Visual Inspection) 100 AAR-M914-00 AAR M-914 2.3.2 (Freezing Point) 100 AAR-M914-01 AAR M-914 2.3.3 (Spreadability)
More information10.6 Schedule of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
More informationLinetronic Technologies Laboratory and Process Analyzers Catalogue 2018
Linetronic Technologies Laboratory and Process Analyzers Catalogue 2018 Table of contents Automatic Analysers Manual and Semi-automatic Analysers NewLab Aniline NewLab 100 Cloud Point NewLab 200 CFPP
More informationTests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL. SINCE 1985 Quality Controlled Through Analysis
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL SINCE 1985 Client: Powertron LLC Requested By: Mr. Tony Sgarbi Sample: 10% PermaFrost + 90% Report
More information10.6 Scope of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
More informationISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa
ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18752-4 SANS 342:2006 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911
More informationCertificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,
More informationSpecifications Of Straight Run Naphtha for Exportation
Specifications Of Straight Run Naphtha for Exportation ASTM Specific Gravity @ 60/60 F 1298 160 0.690-0.730 Colour VISUAL Colourless R.V.P @ 100 F kg/cm2 max 323 69 0.07 Sulphur, Total %mass max 1266 107
More informationFREQUENTLY ASKED QUESTIONS (FAQs)
FREQUENTLY ASKED QUESTIONS (FAQs) What are the Petrochemicals? Any chemical derived from crude oil,crude products or natural gas. Where the petrochemicals are used? In the manufacture of Synthetic rubber,
More informationFaculty of Mechanical Engineering B.E. Automobile Engineering (R 2013) Semester III
. (R 03) Semester III AT63 AUTOMOTIVE COMPONENTS LABORATORY Multi Cylinder Petrol Engine. 3. 4. 5. 6. 7. 8. 9. 0. Multi Cylinder Diesel Engine Petrol and Diesel fuel systems each Heavy duty vehicle chassis
More informationExceeding Expectations
Technical Notes # 028 Linear vs. Non-Linear that is the question Exceeding Expectations When blending, it is important to understand whether the specification you are blending for is linear or non-linear
More informationPETROLEUM TESTING EQUIPMENT N-WISSEN 2016
` PETROLEUM TESTING EQUIPMENT N-WISSEN 2016 N-Wissen products range includes the following petroleum testing and measuring equipment: ASTM D 5 - D 217 Digital penetrometer for bitumens; ASTM D 5 - D 217
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ITS Testing Services (UK) Limited (Caleb Brett - Downstream) Caleb Brett House Unit A 734 London Road West Thurrock Grays Essex RM20 3NL Contact:
More informationPETROLEUM LABORATORY TESTING AND OPERATIONS
* FM 10-67-2 Field Manual No. 10-67-2 HEADQUARTERS DEPARTMENT OF THE ARMY Washington, DC, 2 April 1997 PETROLEUM LABORATORY TESTING AND OPERATIONS Table of Contents Page PREFACE CHAPTER 1 I CHAPTER 2 I
More informationRSSOT New Standards ASTM D 7525 ASTM D 7545 ASTM D 7525 ASTM D Manufacturer since
RSSOT New Standards ASTM D 7525 ASTM D 7545 EN RSSOT 16091 ASTM D 7525 ASTM D 7545 Manufacturer since 1873 WWW.PETROTEST.COM Oxidation Stability Rapid Small Scale Oxidation Test (RSSOT) A new Method for
More informationDEPARTMENT OF CHEMICAL ENGINEERING University of Engineering & Technology, Lahore. Energy Engineering Lab
DEPARTMENT OF CHEMICAL ENGINEERING University of Engineering & Technology, Lahore Energy Engineering Lab Introduction Energy is often defined as the capacity to do work. Several different forms of energy,
More informationLubricant Testing Solutions Laboratory Instruments for quality control, analysis and calibration
Laboratory Instruments for quality control, analysis and calibration Flash Point Flash point is a key property for lubricating oils and is included in many specifications. All petroleum products will ignite
More informationCONTENTS. Introduction 1 Explanation of Terms 2 Table I Test Method Equivalence 3 Table II Alphanumeric Index of Standards 6
vii CONTENTS Introduction 1 Explanation of Terms 2 Table I Test Method Equivalence 3 Table II Alphanumeric Index of Standards 6 Analysis Reference ASTM Standard ACID NUMBER by color indicator titration
More informationSmoke Point Significance and Use
Smoke Point The maximum height, in millimetres, of a smokeless flame of fuel burned in a wick-fed lamp of specified design. The sample is burned in an enclosed wick-fed lamp that is calibrated against
More informationSignificance of Each Test. 1. Color (Visual)
Significance of Each Test 1. Color (Visual) Determine the color of lubricant product by assessing the appearance of transmitted light appearance and intensity, as compare with a standard. Color alone is
More informationएमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY
एमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY PRODUCTS SPECIFICATIONS:2017 INDIAN STANDARD (IS) SPECIFICATIONS FOR DOMESTIC PRODUCTS: 2017 S.No Product Name Specification Number 1 Liquefied
More informationCrude Assay Report. Crude Oil sample marked. Barrow Crude Oil. On Behalf Of. Chevron Australia Pty Ltd. Laboratory Supervisor. Crude Assay Chemist
Crude Assay Report on Crude Oil sample marked Barrow Crude Oil On Behalf Of Chevron Australia Pty Ltd. Reported by: Approved by: Michelle Fernandez Laboratory Supervisor Jhonas Fernandez Crude Assay Chemist
More informationCrude Oil and E&P Testing Laboratory Instruments for quality control, analysis and calibration
Laboratory Instruments for quality control, analysis and calibration S Analyser with Vapour Phase Processor (VPP) TM (SA4000-3 & SA4015-0) ASTM D7621 Appendix X1; IP 570 Procedure A Measurement range from
More informationDraft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
More informationProviding Industry with turn key solutions - worldwide
Providing Industry with turn key solutions - worldwide SECTION 1 Introduction 2 Our Accreditation Flash Point Standards Cleveland Open Cup Flash Point Pensky-Martens Flash Point Viscosity Standards CCS
More informationU tube viscometer. Kinematic viscosity bath RASAYAN
Viscosity The viscosity of a fluid is a measure of its resistance to gradual deformation by shear stress or tensile stress. For liquids, it corresponds to the informal notion of "thickness". For example,
More informationPenetration. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
More informationMILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL
INCH-POUND MIL-DTL-83767C 24 September 2007 SUPERSEDING MIL-L-83767B 8 February 1980 MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL Reactivated after 24 September 2007 and may be used
More information1.1 Unless otherwise stated, the specification references and test methods are from the latest version in effect at the time of this contract.
(Page 1 of 6) LUBRICATING PRODUCTS MGS-92-12K 1.0 DESCRIPTION. This specification covers motor vehicle lubricating products for delivery in prepackaged containers such as drums, pails, etc., or for delivery
More informationRegional Laboratory, Indian Oil Corporation Limited, Korukkupet Terminal, Kathivakkam High Road, Chennai, Tamil Nadu
Regional, Indian Oil Corporation Limited, Korukkupet Last Amended on 07.01.2014 Page 1 of 5 Specific Method Specification against Range of ing / I. PETROLEUM PRODUCTS 1. JetA1, JP5 Acidity, Total P-113
More informationCatalogue January 2013, R 2.0
Catalogue 2013-2014 January 2013, R 2.0 TV4000 with TVS and Manifold for ASTM D2171 See page 24 Content 1 ASTM Equipment...5 1.1 How to select the appropriate viscosity bath?... 6 1.2 ASTM D445 High Temperature
More informationTEST FACILITIES AT SQAE(GS), KOLKATA LAB STORES DTE Name of Estt with address, Name of Srl.No Nodal officer and contact No
TEST FACILITIES AT, KOLKATA LAB STORES DTE Name of Estt with address, Name of Srl.No Testing Facilities Available Range of Test Eqpt. TEXTILE (MECHANICAL) 1 Yarn Strength Tester 5 Kg / 20 Kg 2 Vertical
More informationOrdinary lubricants are manufactured from paraffinic base oils that use low grade crudes and undergo a 3-step refining process.
Ordinary lubricants are manufactured from paraffinic base oils that use low grade crudes and undergo a 3-step refining process. NAPHTHENE PARAFFIN Oberon sets the standards in lubrication engineering with
More informationSHELLSOL D60. Shell Chemicals. Data Sheet. Lemont, IL Cotton Valley, LA. Product Name
Shell Chemicals Data Sheet Product Name SHELLSOL D60 This product is manufactured at more than one production site. The sales specifications of these products are the same, some typical data however may
More informationProcedure for Koehler Digital Constant Temperature Viscosity Bath
Procedure for Koehler Digital Constant Temperature Viscosity Bath Intro: This unit is designed to perform kinematic viscosity tests using glass capillary viscometers, for this lab you will be using Cannon-Fenske
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
More informationFor the fastest possible service, you can now reach Koehler via the Internet. On our website, you can:
For the fastest possible service, you can now reach Koehler via the Internet. On our website, you can: Locate the test instrument you need based on your desired ASTM method. Download product information.
More informationPURE SYNTHETIC COMPRESSOR OIL ISO 22 THROUGH ISO 220
PURE SYNTHETIC COMPRESSOR OIL #8 ISO 22 THROUGH ISO 2 Pure Synthetic Compressor Oil is a full synthetic, non-detergent, ashless, non-zinc containing anti-wear, rust and oxidation inhibited premium quality
More informationASTM Aviation (Turbine) Jet Fuel Sample ID: JF1211
ACID NUMBER D3242 Report result to the nearest 0.001 mg KOH/g Acidity BOCLE (LUBRICITY) D5001 Report result to nearest 0.01 mm Fully-automatic WEAR SCAR DIAMETER (WSD) Semi-automatic WEAR SCAN DIAMETER
More informationOIL PT. Scheme Description. Oils and Fuels Analysis Proficiency Testing Scheme
OIL PT Oils and Fuels Analysis Proficiency Testing Scheme Scheme Description LGC Standards Proficiency Testing 1 Chamberhall Business Park Chamberhall Green Bury, BL9 0AP UK. Telephone: +44 (0) 161 762
More informationएमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018. Page 1 of 17
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ २०१८ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018 Page 1 of 17 INDIAN STANDARD (IS) SPECIFICATION FOR DOMESTIC PRODUCTS: 2018 S. No Product Name Specification
More informationFuel oils Specification
TANZANIA STANDARD CDC15 (4029)P3 (Rev. of TZS 673:2014) Fuel oils Specification 0 Foreword This Tanzania Standard was prepared under the direction of Petroleum and Petroleum Products Technical committee,
More informationASTM D189 pg 3. ASTM D130 pg 2. ASTM D445 pg 4. ASTM D874 pg 7. ASTM D1160 pg 6. ASTM D1160 pg 8 ASTM D1796/D2709 pg 9 ASTM D2274 pg 10
www.hoskin.ca ASTM D93 pg 1 ASTM D130 pg 2 ASTM D189 pg 3 ASTM D445 pg 4 ASTM D874 pg 5 ASTM D1160 pg 6 ASTM D874 pg 7 ASTM D1160 pg 8 ASTM D1796/D2709 pg 9 ASTM D2274 pg 10 ASTM D2500 pg 11 ASTM D2622
More informationLubricants and Greases. Shibu G. Pillai
Lubricants and Greases Shibu G. Pillai Contents Introduction Functions of lubricants Mechanism of lubrication Classification of lubricants Properties of lubricants Selection of lubricants Classification
More informationSoldier's Manual and Trainer's Guide MOS 92L. Petroleum Laboratory Specialist. Skill Levels 1, 2, 3, and 4 MAY 2005
Soldier's Manual and Trainer's Guide MOS 92L Petroleum Laboratory Specialist Skill Levels 1, 2, 3, and 4 MAY 2005 DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited. HEADQUARTERS
More informationASTM THERMOMETERS, TEST SPECIMENS AND GLASSWARE
ASTM THERMOMETERS, TEST SPECIMENS AND GLASSWARE Test Methods Page ASTM Thermometers...184 Glass Apparatus for ASTM Test Methods...192 Standardized Metal Test Specimens...197 www.koehlerinstrument.com Koehler
More informationएमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019
एमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक MRPL QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019 Page 1 of 15 BUREAU OF INDIAN STANDARDS (BIS) SPECIFICATION
More informationProduct Profile. Laboratory instruments. for quality control, analysis and calibration. Fuels
Fuels Product Profile Biofuels Petroleum feedstock Crude oil Chemicals Lubricants Cosmetics Paints and varnishes Bitumens Recycled product Laboratory instruments for quality control, analysis and calibration
More informationFUELS. Test Methods
FUELS s Page Oxidation Stability of Gasoline (Induction Period Method) ASTM D525, D873, D5304; IP 40, 138; ISO 7536 DIN 51799, 51780; FTM 791-3352, 791-3354...80-84 Oxidation Stability of Aviation Fuels
More informationAmerican Society for Testing and Materials
SUANDARDS 8UMMARV A summary of relevant Standards published by the British Standards Institution (including those which relate to International Standards), and by the American Society for Testing and Materials.
More informationPetro Solutions. Analytical Instruments for the Petrochemical Industry
Petro Solutions Analytical Instruments for the Petrochemical Industry Analytical Excellence Petrochemical Analytical Instruments for Accurate and Compliant Analyses From crude to gasoline, diesel, liquid
More informationASTM-API Thermometers
ASTM Mercury Thermometers ASTM-API Thermometers CATALOG No. ASTM No. The ASTM - Mercury Thermometers listed are made in accordance with specifications of the American Society for Testing and Material.
More informationFuels. Test Methods
Fuels s Page Oxidation Stability of Gasoline (Induction Period Method) ASTM D525, D5304; IP 40; ISO 7536 DIN 51799, 51780; FTM 791-3352...80-84 Oxidation Stability of Aviation Fuels (Potential Residue
More informationQuality. Integrity. Confidence
Products & Services Quality. Integrity. Confidence Contents Paragon Scientific Background Information 4 Certified Reference Materials (CRMs) 8 Certified Reference Materials ISO Guide 34 Certified Reference
More informationPetroleum Testing Equipment
Petroleum Testing Equipment www.koehlerinstrument.com BOHEMIA, NEW YORK HOUSTON, TEXAS Worldwide Support Providing quality testing instrumentation and technical support services for research and testing
More informationStabinger Viscometer SVM 3001
Stabinger Viscometer SVM 3001 Expect More Welcome to New Viscometry Measuring the viscosity of oils and fuels is all about certainty and compliance. Two approaches get you there: the traditional glass
More informationOn-Line Process Analyzers: Potential Uses and Applications
On-Line Process Analyzers: Potential Uses and Applications INTRODUCTION The purpose of this report is to provide ideas for application of Precision Scientific process analyzers in petroleum refineries.
More information