Foaming of Lubricating Oils (manual)
|
|
- Margaret Chase
- 6 years ago
- Views:
Transcription
1 Foaming of Lubricating Oils (manual) ASTM D 892, ASTM D 6082 sequence IV, ISO 6247, DIN 51566, IP 146, JIS K2518, BS 5092 (obs.) Product group(s): User group(s): Scope: Lubricant Testing Automotive, Engine Oil, Gear Oil, Jet Lube, Lube Oil, Lubricating Oil, Motor Vehicles, Power Plant, Transmission Fluid, Turbine Oil The tendency of oils to foam can be a serious problem in systems such as high-speed gearing, high-volume pumping, and splash lubrication. Inadequate lubrication, cavitation, and overflow loss of lubricant can lead to mechanical failure. Tests at 150 C are determined according ASTM D For temperatures below 150 C according ASTM D 892. Foaming Characteristic Test Equipment to be composed of: - Foam-Tester (Twin-Bath or Single-Bath Arrangement) - Test Cylinder - Taper-Stopper - Thermometer (ASTM 12C/IP 64C) - ROTA-Flow Meter ( l/h) - Diffuser Set(cylindrical-shaped or ball-shaped diffuser) Required accessories: - Air Drying Tower - Vacuum-Pump with Mini-Compressor & Accessories Main Unit / Foam-Tester - Twin Bath Arrangement ASTM D 892 (sequence I, II, III) - IP ISO JIS K ASTM D 6082 (sequence IV) Four test places in each of the two baths. 2 full-view tempering baths 4 graduated test cylinders, 1000 ml 2 PTFE-tapered stoppers ( ) with nipple for not-included quick-coupling 2 diffuser sets with cylindrical diffuser 2 flow meters, single unit, l/h 2 thermometers ASTM 12C ( ) Note! Each bath to be maintained individually at 24, 49, 93.5 and 150 C or other temperatures within this range / Foam-Tester - Twin Bath Arrangement Like but: Page: 1
2 / Foam Tester - Single Bath Arrangement ASTM D 892 (sequence I, II, III) - IP ISO JIS K ASTM D 6082 (sequence IV) 1 borosilicate jar 20 l, bath insert with lids for the openings in the cover plate which will accommodate up to 4 test cylinders and the cooling probe of an external coolant circulator; clamping springs and guides for the test cylinders, hose guides and holder for a thermometer. Thermostatic bath: a high-performance, digitally-indicating circulation-thermostat module, cooling coil, temperature probe and self-optimizing electronic heating control. Supplied with: 4 lids 1 leakage protection vessel 1 temperature insulation Note! Each bath to be maintained individually at 24, 49, 93.5 and 150 C or other temperatures within this range / Foam Tester - Single Bath Arrangement Like but: / Test Cylinder, 1000 ml, graduated / Stopper, PTFE (45/40) / Thermometer ASTM 12C / IP 64C Range: -20 to +102 : 0.2 C Length: 420 mm, Immersion: total, Ø 7 mm / Flow Meter Unit, l/h 1-place bench, needle valve, special tripod base with adjusting screws and level indicator, includes 1 meter of connection hose, 1 T-tube and 2 angle bends / Diffuser Set (cylindrical-shape) air-inlet tube, quick coupling, 10 PTFE-gaskets, 2 m silicon hose and cylindrical-shaped diffuser / Diffuser Set (ball-shape) air-inlet tube, quick coupling, 10 PTFE-gaskets, 2 m silicon hose and ball-shaped diffuser Options & Accessories / Centering-Disk for Diffuser / Air Drying Tower (Ø 45 mm x 315 mm high) needs to be filled with desiccant, indicating desiccant and cotton layers / Thermometer Holder Page: 2
3 / Vacuum-Pump with Mini-Compressor & Accessories 1 oil-free diaphragm pump with filter, 1 hose (Ø 6 mm x 1 m, silicon, clear), 1 T-piece connection (Ø 7.5 mm) 1 Hoffmann-Clip Technical Data: Max. capacity: 11.5 l/min End vacuum: 240 mbar Operating pressure: 2 bar (overpressure) Dimensions / Weight: 9 x 20 x 13 cm (WxDxH), 2.2 kg Power supply: 220/230 V, 50 Hz, EU-plug / Vacuum-Pump with Mini-Compressor & Accessories Like but: Power supply: 110/115 V, 60 Hz, US-plug / Fine Control Valve with hose nipples / Luminous Background Large field lamp (25 x 25 cm) for convenient glare-free observation in a transparent thermostatic bath. Dimensions: (WxHxD) 250 x 350 x 140 mm, 3.5 kg Power supply: 220/250 V, 50/60 Hz, 22 W / Luminous Background Like but: / Digital Stop Watch 7-digit LC display, max. 10 hours countdown with 1/100 sec. precision, Lithium battery quartz-controlled water resistant memory function calendar / Cylinder Stand with drip tray for 8 test cylinders / ASTM D 6082 Sequence-IV Test Set for foaming test up to 150 C 3 thermometers ASTM 41C 2 thermometer holders 2 flow meters, l/h / Diffuser Stone Test Set ASTM D ASTM D ADTM D IP 146 to check the max. pore diameter & permeability gas-volume meter, l/h U-tube manometer, needle valve receiver, 250 ml vacuum flask, 500 ml with bored stopper hose of 1 m and 2 m length T-connector, 1 each Page: 3
4 / Air Volume Test Set ASTM D ASTM D IP 146 to check the total air-flow rate air volume meter, 1-60 l/h air cooling coil hose length with fork clamp / Gas Volume Test Set "Economy" ASTM D stand flask 1 gas measure glass, 1 liter 1 connecting tubing with coupling 1 cooling coil 1 clamp and adapter / Quick Coupling easy mains of air-volume meter hose with tapered stopper / Upgrading Outfit to use all 8 test places of the Quadruple Twin Foam-Tester 4 graduated test cylinders, 1000 ml 2 bored stoppers 2 diffuser sets, cylindrical type / Circulation Cooler (+5/+40) For cooling of instruments without circulation pump (external tempering). Economical solution for cooling without tap water. Cooler with tank and integrated pump. Note: Insulated hose-set ( ) is recommended Technical Data: Working range: +5 to +40 C (at +5 to +40 C ambient temp.) Display / Resolution: LED / 0.1 C Cooling capacity: 250 W at +20 C Pump-Pressure capacity: 15 l/min, 0.35 bar (5.1 psi) Volume: l Sockets for: hose (Ø 8 / 10 mm) Dimensions / Weight: 24 x 40 x 52 cm (WxDxH), 27 kg Power supply: 230 V, 50 Hz, 2 A, EU-plug / Circulation Cooler (+5/+40) Like but: Power supply: 115 V, 60 Hz / Cooling Coil / Pre-Tempering Bath 20l bath, 2 test cylinders, 1 thermometer ASTM 12C / Pre-Tempering Bath Like but: Spare Parts / Thermometer ASTM 12C / IP 64C Range: -20 to +102 : 0.2 C Page: 4
5 Length: 420 mm, Immersion: total, Ø 7 mm / Test Cylinder, 1000 ml, graduated / Stopper, PTFE (45/40) / Quick Coupling for air-inlet tube / Gaskets for the diffuser, pack of / Gas Diffuser, cylindrical shape BSF 3/16"-thread, with works-certificate and laser-engraved identification-number, sintered metal / Gas Diffuser, ball shape BSF 3/16"-thread, with works-certificate and laser-engraved identification-number, alundum stone, spherical 1" Order Guideline Minimum equipment: 1x or 1x , 1x , 1x Spares (approx. 1 year): , Diffuser Stone, Thermometer Additional requirements: Page: 5
Instruments for the Analysis of Petroleum Products. Oxidation Stability
Instruments for the Analysis of Petroleum Products Oxidation Stability What is Oxidation Stability? Oxidation stability describes the resistance of a material towards oxygen. This is a basic requirement
More informationA SURVEY OF OUR KNOW-HOW : PETROLEUM GLASSWARE VISCOMETER TUBES
N O R M A L A B A N A L I S A SURVEY OF OUR KNOW-HOW : PETROLEUM GLASSWARE VISCOMETER TUBES NORMALAB ANALIS FRANCE S.A. 14, rue des Lilas 76210 LINTOT - FRANCE Tel : (33) 02 35 38 59 59 Fax : (33) 02 35
More informationLUBRICATING OILS. Test Methods
LUBRICATING OILS s Page Foaming Characteristics of Lubricating Oils ASTM D892, D6082; IP 146; DIN 51566; FTM 791-3211, 791-3213...108-110 Water Separability of Petroleum Oils and Synthetic Fluids ASTM
More informationU tube viscometer. Kinematic viscosity bath RASAYAN
Viscosity The viscosity of a fluid is a measure of its resistance to gradual deformation by shear stress or tensile stress. For liquids, it corresponds to the informal notion of "thickness". For example,
More informationLubricating Oils. Test Methods
Lubricating Oils s Page Foaming Characteristics of Lubricating Oils ASTM D892, D6082; IP 146; DIN 51566; FTM 791-3211, 791-3213...108-110 Water Separability of Petroleum Oils and Synthetic Fluids ASTM
More informationVessels and Distillation Equipment
Vessels and Distillation Equipment 147 A suitable solution for practically every application in well-known BOLA-quality and optimally adapted to your needs. PRODUCT TIPS BOLA Scrubber Columns Pressure:
More informationThe Safest Heating Method!
ACE Instatherm For Glass Vessels The Safest Heating Method! Borosilicate Glass Eliminate the need for heating tapes, immersion heaters and heating mantles. Instatherm is a safer, more precise heating method
More informationBioengineering RALF Autoclavable Laboratory Bioreactors / Fermentors with glass vessels. Bioengineering RALF Basic + Advanced
1 Data Sheet Bioengineering RALF Bioengineering RALF Autoclavable Laboratory Bioreactors / Fermentors with glass vessels. The glass vessels have both a round bottom and stainless steel lid. The system
More informationInstatherm ACE. The Safest Heating Method! Eliminate the need for heating tapes, immersion heaters and heating mantles.
ACE For Glass Vessels Borosilicate Glass Fused-to-Glass Conductive Heating Film Integral Outer Insulation Instatherm The Safest Heating Method! Eliminate the need for heating tapes, immersion heaters and
More informationInstatherm ACE. The Safest Heating Method! Eliminate the need for heating tapes, immersion heaters and heating mantles P.
ACE For Glass Vessels Borosilicate Glass Fused-to-Glass Conductive Heating Film Integral Outer Insulation Instatherm The Safest Heating Method! Eliminate the need for heating tapes, immersion heaters and
More informationNEW Reactor-Ready Duo Lab Reactor
1 NEW Reactor-Ready Duo Lab Reactor 1 2 Duo Core System RR121300 Reactor-Ready Duo Core System. Includes: 1 6,725.00 Duo stand with base, drip tray, support rods, bosses and all clamps 4 x Hose tidies
More informationSeries 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries DIN or
More informationCatalogue January 2013, R 2.0
Catalogue 2013-2014 January 2013, R 2.0 TV4000 with TVS and Manifold for ASTM D2171 See page 24 Content 1 ASTM Equipment...5 1.1 How to select the appropriate viscosity bath?... 6 1.2 ASTM D445 High Temperature
More informationInterface I-300 / I-300 Pro Technical data sheet
Interface I-300 / I-300 Pro Technical data sheet The Interface I-300 or I-300 Pro are the central control unit for all process parameters of a Rotavapor R-300 system: rotation speed, temperature (heating
More informationReactor Vessels & Accessories
Edition 11/2015 Reactor Vessels & Accessories Schmizo AG l Grünmattstrasse 4 l 4665 Oftringen/Switzerland l Phone +41 62 789 60 50 l Fax +41 62 789 60 51 l info@schmizo.ch l www.schmizo.ch Table of Contents
More informationSILOXA frame-mounted gas drying system, GK model, set up for outdoor installation
Technical Datasheet 1/5 Condensate trap Moulded piece, material No. 1.4571, for fl ange-mounting on gas cooler DN 150-400 Demister, material No. 1.4571 Condensate outlet via liquid shut-off valve Monitoring
More information2 ADAPTERS. Bushing / Connecting. Glass Bushing Adapters. Straight Connecting Adapters. PTFE Bushing Adapters. Offset Connecting Adapters
ADAPTERS Whether converting joint types, reducing or enlarging joints, or creating connections in a distillation apparatus, Kimble offers a comprehensive selection of adapters including bushing adapters,
More informationDOMESTIC LPG REGULATORS & ACCESSORIES MOVABLE TANKS TANK INSTALLATION CONNECTED WITH MANIFOLDS
MOVABLE TANKS Room volume < 10 m 3 Forbidden Room volume from 10 up to 20 m 3 Max 1 tank up to 15 Kg Room volume from 20 up to m 3 Max 2 tanks up to 20 Kg total Room volume from > 50 m 3 Max 2 tanks up
More information3 CONNECTING PIECES NORMAG - LABORATORY GLASSWARE. L 303 e.1
3 CONNECTING PIECES NORMAG - LABORATORY GLASSWARE L 303 e.1 CONICAL GROUND JOINTS Besides a numerous of other types of connectors, conical ground joints are mostly used for laboratory glassware. They are
More informationTFE 510 Core Thermometer with fast response time
84 Temperature Thermometers TFE 510 Core Thermometer with fast response time Measurement range -50 C... 300 C (-58 F... 572 F) Accuracy ±0.5 C (0.9 F) Resolution 0.1 C (0.2 F) Measurement probe Thermocouple,
More informationwww.labtron.com info@labtron.com Distillation Tester LDT-A10 Labtron LDT-A10 is automated and can withstand a very high temperature. It is designed according to Test Methods for Distillation Characteristics
More informationground cones Ground Sockets screw thread tubes spehrical joints stoppers tubing connectors universal connectors interchangeable GLASSWARE
ground cones Ground Sockets screw thread tubes spehrical joints stoppers tubing connectors universal connectors interchangeable GLASSWARE 2 Cones 1001 Acc. to DIN 12249 form B and in addition to standard,
More informationwww.cmadishmachines.com Table of Contents CMA-66 1. PARTS MANUAL... 4 1.1. Initial Parts Kit (P/N 13996.81)... 4 1.2. Initial Parts Kit (P/N 13996.80)... 5 1.3. Exploded View Drawings... 6 1.3.1. Cabinet
More informationwww.cmadishmachines.com Table of Contents CMA-44 1. PARTS MANUAL... 4 1.1. Initial Parts Kit (P/N 13996.81)... 4 1.2. Initial Parts Kit (P/N 13996.80)... 5 1.3. Exploded View Drawings... 6 1.3.1. Cabinet
More informationDIN EN ISO 9001 GENERAL CATALOG. ST-Components BEST BUY. english
DIN EN ISO 9001 GENERAL CATALOG -Components BE BUY english -components -cones, acc. to DIN 12249. PRECISO. O. D. Length Wall thick. Standard Skirted mm mm mm form B form G 5/13 4 120 0.8 0.100.005 7/16
More informationELADOS EMP III Diaphragm Pump type electronically controlled
electronically controlled Mechanical stroke adjustment Stroke frequency regulation Pulse control Pulse multiplication and division Pulse memory Standard signal control Empty signal and low level warning
More informationELADOS EMP III Diaphragm Pump type
ELADOS EMP III Diaphragm Pump type 00160-00540 Mechanical stroke adjustment Stroke frequency regulation Pulse control Pulse multiplication and division Pulse memory Standard signal control Empty signal
More informationBOHLENDER GmbH Phone: +49(0)9346 / Fax: +49(0)9346 / Internet:
Internet: www.bola.de E-Mail: info@bola.de BOLA-Flat Flange Distillation Apparatuses made of Fluoroplastic () with SAFE LAB-System 5 9 Suitable for the distillation of strong alkaline or acid products
More informationPenetration. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
More informationInstruments for Chemical and Petroleum Products. Flash Point
Instruments for Chemical and Petroleum Products Flash Point A Tradition of Competence 140 years of technological advances lie between the first flash point tester and today s Anton Paar product line of
More informationCyclic Corrosion Chamber C.C.T AUTO Series
Cyclic Corrosion Chamber C.C.T AUTO Series CCT 5000 AUTO image merely illustrative Cooling system image merely illustrative Specifications/ Models CCT 1300 AUTO CCT 3000 AUTO CCT 5000 AUTO Allows 7 different
More informationFluoro plastic products
Volumetric flasks, PFA, class A 472 High transparency, individually calibrated ring-mark. Tolerances class A according to DIN EN ISO 1042. With lasered lot.number. Supplied with PFA screw-caps. Screw-caps
More informationOverview Spare Parts Manual Update: 3/11/04
Overview Spare Parts Manual Update: 3/11/04 1.1 Outside View Verismo 701 1.2 Outside View Ambiente PS 2.1 Steam Boiler Boiler View 2.1.1 Steam Boiler Boiler Upgrade 2.2 Steam Boiler Steam Valve 2.3 Steam
More informationCoolant Pump, Remove and Install (Z 22 SE)
Page 1 of 10 Coolant Pump, Remove and Install (Z 22 SE) Remove 1. Open the bonnet. 2. Disconnect the battery. 3. Open the rear engine cover (1). 4. Detach the rear engine cover. 6 bolts (2) and (3) 5.
More informationIntegrated temperature test and calibration bench Model CBS-SC4000
Calibration technology Integrated temperature test and calibration bench Model CBS-SC4000 WIKA data sheet CT 92.33 Applications Testing and calibration of temperature measuring instruments such as: - Mercury
More informationELADOS EMP III Diaphragm Pump type
ELADOS EMP III Diaphragm Pump type 00800-01200 Mechanical stroke adjustment Stroke frequency regulation Pulse control Pulse multiplication and division Pulse memory Standard signal control Empty signal
More informationRALF At a glance. Bioengineering RALF essentials. General
0845-12b RALF 6 1/16 RALF At a glance Bioengineering RALF essentials General Autoclavable small benchtop glass reactor Versatile reactor system for numerous different applications Single as well as multiple
More informationCirculating Chillers / Immersion Coolers
Circulating / Immersion Coolers Many applications depend on a reliable source of cooling. Circulating chillers in the Unichiller range offer an ideal solution for environmentally friendly and economical
More informationELADOS EMP IV E00 Diaphragm Pump type
ELADOS EMP IV E00 Diaphragm Pump type 01400 02100 Single phase motor with winding protection, standard Plastic external housing, metal internal housing High delivery capacity at low number of strokes Safety
More information: ENLARGING ADAPTER - joints. Used to connect dissimilar taper joint sizes. Code # Top Outer Bottom Inner Code # Top Outer Bottom Inner
01-1000: REDUCING ADAPTER - Joints. Used to connect dissimilar taper joint sizes. Code # Top Outer Bottom Inner Code # Top Outer Bottom Inner 01 10/30 19/38 19 19/38 45/50 02 10/30 24/40 20 19/38 55/50
More informationtubing, faucets and fittings
small Bore teflon ptfe tubing Order by the Foot* Superior Chemical Resistance High degree of flexibility allows multiple twists and turns in tight spaces Non-stick surface will not collect particulates
More informationT EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm
T 8048-2 EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries according to DIN or ANSI standards with USP-VI
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
More informationWater Baths & Shaking Water Baths. Quality Technology for Routine Applications
Water Baths & Shaking Water Baths Quality Technology for Routine Applications 94 Water Baths and Shaking Water Baths The TW and SW Water Bath Series are microprocessor-controlled, durable, and long-lasting
More informationProduct Catalog TTB Tauchertechnik Brandenburg GmbH
Product Catalog TTB Tauchertechnik Brandenburg GmbH Production and distribution of state-of-the-art hydrostatic test stations and systems for steel and composite compressed-air cylinders Table of contents
More informationRev.2.06A www.cmadishmachines.com Table of Contents EST-44 1. PARTS MANUAL... 3 1.1. Initial Parts Kit... 3 1.2. Exploded View Drawings... 4 1.2.1. Cabinet Assembly... 4 1.2.2. Control Box Assembly (3
More informationSafety drying ovens. Advantages: Areas of application: FDL series 115
FDL series 115 Safety drying ovens Safety drying ovens The BINDER FDL with silicone and dust-free inner chamber, as well as symmetric airflow dries specimens containing solvents perfectly and thus meets
More informationProcedure for Koehler Digital Constant Temperature Viscosity Bath
Procedure for Koehler Digital Constant Temperature Viscosity Bath Intro: This unit is designed to perform kinematic viscosity tests using glass capillary viscometers, for this lab you will be using Cannon-Fenske
More informationRev.2.05 www.cmadishmachines.com Table of Contents EST-44 1. PARTS MANUAL... 3 1.1. Initial Parts Kit... 3 1.2. Exploded View Drawings... 4 1.2.1. Cabinet Assembly... 4 1.2.2. Control Box Assembly... 5
More informationLevel instruments. Point level measurement - Vibrating switches SITRANS LVL100. 5/78 Siemens FI Horizontal mounting.
evel instruments Siemens AG 2009 Overview Configuration Horizontal mounting (recommended mounting position, particularly for adhesive applications) Vertical mounting with lower density is a compact vibrating
More informationResistance thermometer with digital indicator Model TR75, battery operation
Electrical temperature measurement Resistance thermometer with digital indicator Model TR75, battery operation WIKA data sheet TE 60.75 Applications DiwiTherm Machine building, plant and vessel construction
More informationCOMPONENTS FOR SOLAR THERMAL SYSTEMS
COMPONENTS FOR SOLAR THERMAL SYSTEMS The Caleffi Solar product range has been specially developed for use in solar thermal systems, where high temperatures can normally be reached and where, depending
More informationGiotto and Cellini Evoluzione machine range
Giotto and Cellini Evoluzione machine range A- GIOTTO EVOLUZIONE Bodywork Page 2 of 17 ed. 2011/04 A- GIOTTO EVOLUZIONE Bodywork Pos. Code Nr. Description 1 C000004248 Chassis 2 A019904282 Foot 40mm 3
More information4000 Series TRG3 Diesel Engine ElectropaK rpm
The Perkins 4000 Series family of 6, 8, 12 and 16 cylinder diesel engines was designed in advance of today s uncompromising demands within the power generation industry and includes superior performance
More informationCyclic Corrosion Test CORR Series
Cyclic Corrosion Test CORR Series CCT 1300 CORR image merely illustrative Specifications/Model CCT 1300 CORR CCT 3000 CORR CCT 5000 CORR - Mode: SALT SPRAY / SALT FOG - Mode: WATER CONDENSATION HUMIDITY
More informationLAUDA Integral. Process thermostats for professional external thermostating across a wide temperature range from -90 up to 320 C
LAUDA Integral Process thermostats for professional external thermostating across a wide temperature range from -9 up to C Application examples Process technology Process engineering Production Research
More information01. Standard Joints & Fittings Page Stirrers Page 03. Condensers Page 04. Flasks Page 05. Tissue Homogenisers Page 06.
01. Standard Joints & Fittings Page 2-11 02. Stirrers Page 12-14 03. Condensers Page 15 20 04. Flasks Page 21 30 05. Tissue Homogenisers Page 31 06. Funnels Page 32 37 07. Distillation Assemblies Page
More informationMODEL CMA-44 PARTS MANUAL Rev 2.13
MODEL CMA-44 PARTS MANUAL Rev 2.13 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com Table of Contents CMA-44 1. PARTS MANUAL... 4
More informationVACUUM FILTRATION
VACUUM FILTRATION Introduction Glass Microfiltration: Support Systems mm Glass Microanalysis Holders mm Glass Microanalysis Holders 7 mm Glass Microanalysis Holders 7 mm Glass: All-Teflon seal 7 mm Glass:
More informationTemperature multi-function calibrator Model CTM
Calibration Temperature multi-function calibrator Model CTM9100-150 WIKA data sheet CT 41.40 for further approvals see page 3 Applications Testing and calibration of all types of temperature measuring
More informationLevel indicators, screw plugs
Level indicators, screw plugs 885 Product overview Level indicators, screw plugs Oil level gauges K0443 Plastic plugs K0452 Oil level gauges K0444 Page 888 Aluminium plugs K0453 Page 894 Oil level sight
More informationSC1515 Radiator coolant replacement system WOLF S HEAD
SC1515 Radiator coolant replacement system Product Catalogue 2012.01 - Pneumatic design provides simple and easy extraction - Transparent twin cylinder, easy to monitor fluid separation process - Also
More informationLevel Measurement Point level measurement - Vibrating switches
Overview Configuration Horizontal mounting (recommended mounting position, particularly for adhesive applications) Vertical mounting is a compact vibrating level switch for material detection in liquid
More informationResistance thermometer with digital display Model TR75, battery operation
Electrical temperature measurement Resistance thermometer with digital display Model TR75, battery operation WIKA data sheet TE 60.75 Applications DiwiTherm Machine building, plant and vessel construction
More informationCal. AS32A SOLAR SERIES 10 1/ mm. Approx. 4 months. Ø 23.3mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. AS32A Movement Size 10 1/2 Casing Diameter Ø 23.3mm Height 4.61mm Running Time Approx. 4 months Date: 31/Oct./'16 Cal. AS32A Items Rev. Page Features
More informationInstitute for Design of Electrical Measuring Instruments, Swatantryaveer Tatya Tope Marg, Chunabhatti, Sion, Mumbai, Maharashtra
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1 Calipers $ Up to 600 mm 10.4 µm Using Caliper Checker by Up to 1000 mm 13.2 µm Using Long Slip Gauge by 2 Height Gauges $ Up to 600 mm 12.8 µm Using
More informationIKA Mixing Magnetic stirrers with heating
with heating RET basic safety control RET basic C safety control RET basic safety control IKAMAG, RET basic C safety control IKAMAG with new heating and stirring technology for fast, accurate temperature
More informationAvailable Q3/2014! BOECO GERMANY boro 3.3., amber, graduated, square, Retrace code. Resistant to steam sterilisation up to 140 C
Boeco Glassware BOECO GERMANY boro 3.3., graduated. Retrace code Complete with blue screw cap and pouring ring of PP. 50 ml 32 BOE 5080175 10 100 ml 45 BOE 5080245 10 250 ml 45 BOE 5080365 10 500 ml 45
More informationSIHI LPH-X - Liquid Ring Vacuum Pump Two Stage
- Liquid Ring Vacuum Pump Two Stage 45008, 45311, 45316 Pressure Range: Suction Volume: 33 to 1013 mbar 55 to 258 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but robust construction
More informationSuction Spares and Accessories 2009
MUL91600101 Black Rubber Feet for Machined Base Plates, (Pack of 5) MUL8150038 Black Rubber Feet for Machined Base Plates, (Pack of 4) b MUL94004000 Illuminated Green Rocker Switch (L30mm x W25mm x D30mm)
More informationSITRANS L Level instruments
Overview Configuration is a compact vibrating level switch for use in liquid applications such as overflow, high, low and demand applications, as well as pump protection. It is ideal for use in confined
More informationSalt Spray Test Chamber Model SSe CASS/AASS ASTM B 368 ISO 9227 JIZ 2371
Salt Spray Test Chamber Model SSe CASS/AASS ASTM B 368 ISO 9227 JIZ 2371 Specification/Model SS600e CASS/AASS SS1000e CASS/AASS SS1300e CASS/AASS SS3000e CASS/AASS Chamber Temperature Range Ambient + 9
More informationCOMPONENTS FOR SOLAR THERMAL SYSTEMS
COMPONENTS FOR SOLAR THERMAL SYSTEMS 2012 2 The CALEFFI SOLAR product range has been specially developed for use in solar thermal systems, where high temperatures can normally be reached and where, depending
More informationShriram Institute For Industrial Research, 14-15, Sadarmangala Industrial Area, Whitefield Road, Bangalore, Karnataka
Certificate Number CC-2083 (in lieu of C-0216, C-0304, C-1497) Page 1 of 7 ELECTRO-TECHNICAL CALIBRATION I. MEASURE 1. Time $ 5 sec to 9900 sec 0.12 sec to 5.8 sec Using Digital Time Totalizer (Digital
More informationSlide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines
Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines Centre flange mounted slide bearing type EM 9S The RENK EM 9S bearing is a fully self-contained, centre
More informationLet us be your partners in the viscosity measurement
Kinematic Viscosity To all our clients, Let us be your partners in the viscosity measurement Today s business world requests new challenges and further reaction to the market requirements. Fungilab s aim,
More informationTechnical Specification
Technical Specification including performance data Project 3 x 9CM25 rev 2. consisting of 3 Caterpillar Diesel Generator sets Type 9CM25 with site output of: 2475 bkw at each engine flywheel rated 750
More informationELADOS EMP II Diaphragm Pump Type V
ELADOS EMP II Diaphragm Pump Type V3014-00240 Mechanical stroke adjustment Stroke frequency regulation Pulse control Pulse multiplication and division Pulse storage Standard signal drive Empty signal report
More informationG SERIES - E TOUCH MIXER / TAP
PLUMBERS Installation and maintenance INSTRUCTIONS G SERIES - E TOUCH MIXER / TAP electronically operated MIXER / TAP G Series E Touch Basin Tap G Series E Touch Basin Mixer 1 IS1301C (03/15) INDEX 3 IMPORTANT
More informationPerformance Enhanced For stage IV MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. n Photo may include optional equipment
Performance Enhanced For stage IV MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES n Photo may include optional equipment Your satisfaction is our priority! Hyundai introduces a new line of 9-series diesel
More informationSpare parts suitable for: ITALCREM
ISuitable for Italcrem Spare parts suitable for: ITALCREM Spare parts suitable for coffee machines Furnizor Professionall Srl. TEL: 00-0 8 Email: contact@mag-pro.ro Str. Bucegi /, Cluj Napoca. Romania
More informationmono-mix Contents Complete Equipment with Scope of Supplies 3 Accessories 4-5 Spare Parts
mono-mix Contents Page Complete Equipment with Scope of Supplies 3 Accessories 4-5 Spare Parts mono-mix-fu 230V 1ph 6-9 Control panel FU 230V 1ph 10-13 Control panel FU 230V 1ph with water delay relay
More informationManual Kinematic Viscosity Bath Tamson TV12
Manual Kinematic Viscosity Bath Tamson Rev 1.05 1 Viscosity Business Today Testing kerosene Testing diesel Testing lubricants Testing fuel oils Testing residues Testing bituminous or asphalt samples Testing
More informationHeight Master Page 345. Check Master Page 349. Calibration Tools Page 354
Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More informationSafety drying ovens with expanded temperature range
MDL series 115 Safety drying ovens Safety drying ovens with expanded temperature range The BINDER MDL, with enhanced control function, works at temperatures up to 350 C (662 F). It is it perfectly suited
More informationMODELS CMA-180/180TALL Including 480V MACHINES PARTS MANUAL Rev 2.08A
MODELS CMA-180/180TALL Including 480V MACHINES PARTS MANUAL Rev 2.08A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
More informationProduct Catalog Evacuated tube collectors CPC OEM CPC w OEM
Product Catalog 2004 Evacuated tube collectors CPC OEM CPC w OEM Table of Contents Development/design Production Outgoing goods warehouse Table of Contents Page Evacuated tube collectors CPC 6 OEM, CPC
More informationWASTE OIL GRAVITY RECEIVERS L
WASTE OIL EQUIPMENT WASTE OIL GRAVITY RECEIVERS - 100L AND 70L 72 WASTE OIL SUCTION UNITS - 100L AND 70L 74 COMBINED WASTE OIL SUCTION AND GRAVITY UNITS - 100L AND 70L 76 WASTE OIL SUCTION UNIT - 24L 78
More informationLaboratory Equipment. Tel: +44 (0) u Fax: +44 (0) u
Laboratory Equipment 78 Load Measurement 78 Drying and Weighing 79 Test Sieves 80 Sieve Shakers 81 Laboratory Hardware 82 Glass and Plastic Ware 82 Temperature Measurement 82 General 85 Mobile Laboratories
More informationGuangzhou Junliye Import&Export Co., Ltd. CW-6H Injector Diagnostic & Cleaning System. Operation manual
CW-6H Injector Diagnostic & Cleaning System Operation manual OPERATING MANUAL INDEX 1. Technical Characteristics 2 2. Installation.3 3. Equipment Description..4 4. Control Board.6 5. Operation.9 I. MANUAL
More informationSafety drying oven with expended temperature range
MDL series 115 Safety drying ovens Safety drying oven with expended temperature range The BINDER MDL 115 with enhanced control function works at temperatures up to 350 C. This safety drying oven meets
More informationGeneral In-line four stroke diesel engine with direct injection. Rotation direction, counterclockwise viewed towards flywheel
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
More informationLaboratory Glassware, Instruments & Accessories
A Glass Apart Laboratory Glassware, Instruments & Accessories Mini Catalogue 08-0 DRIFTON A/S is pleased to introduce the MINI CATALOGUE of lab essentials from CO. The catalogue is carefully designed taking
More informationVolkswagen New Beetle 1.8 Liter 4-Cyl. 5V Turbo OBD II Engine Mechanical 19 Engine-Cooling system (Page GR-19)
19 Engine-Cooling system (Page GR-19) Cooling system components, removing and installing Continued coolant circulation pump (V51), checking Coolant hose connection diagram Coolant pump, removing and installing
More informationThermo-anemo-manometer MP 210
Thermo-anemo-manometer MP 210 KEY POINTS Mesure de la pression, de la 2 entrées pour température Pt100 vitesse et du débit Modules interchangeables Jusqu'à 6 mesures en simultané Grand écran graphique
More informationKARL SCHNELL GRINDER SPECIFICATION: KS Process Automat B 22 Type l
KARL SCHNELL GRINDER SPECIFICATION: KS Process Automat B 22 Type 250 300l Execution - total volume mixer bowl approx. 380 l, nominal volume approx. 300 l - stationary design, with four height adjustable
More informationdisplay on the wall or in a panel away from the inline sensor SE30 for easy meter reading.
Analogue Flow Rate Indicator, DN 15...; PN 1...16 Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a large
More informationSECTION 1D1 M162 ENGINE COOLING
SECTION 1D1 M162 ENGINE COOLING CAUTION: Disconnect the negative battery cable before removing or installing any electrical unit or when a tool or equipment could easily come in contact with exposed electrical
More informationFlow limiter SP/SMB13 for line installation in circulating-oil lubrication systems.
1-3004-EN Flow limiter SP/SMB13 for line installation in circulating-oil lubrication systems. Flow limiters are used in circulating-oil lubrication systems. The task of a flow limiter is to divide up the
More informationBENCHTOP SHAKING INCUBATOR
PRODUCT CATALOG SHAKING INCUBATOR www.biolabscientific.com SHAKING INCUBATOR Bench top shaking incubator has a compact design that saves your precious lab space. Stainless steel interiors with exceptional
More information