American Society for Testing and Materials

Transcription

1 SUANDARDS 8UMMARV A summary of relevant Standards published by the British Standards Institution (including those which relate to International Standards), and by the American Society for Testing and Materials. The standards are selected for their reference to lubrication, lubricants and tribology and to the development, testing and use of functional fluids, whether or not they specifically concern synthetics. Inquiries relating to the full standards should be referred to: (British) BSI, 2 Park Street, London W1A 2BS, EngIand. (American) in the USA - ASTM, 1916 Race Street, Philadelphia PA 19103, USA; in Europe - American Technical Publishers Ltd, 68a Wilbury Way, Hitchin, Hertfordshire SG4 OTP, England. American Society for Testing and Materials The standards are grouped alphanumerically within the main subject headings established in the Index to the Annual Book of ASTM Standards, and a brief description of each new standard is included. All documents listed have either been recently published in the Book of Standards or will appear in the next edition (see volume number and year of publication under each subheading). REVISED STANDARDS Volume 05.01, 1986 D Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation D a Specification for Operating Instructions for Glass Capillary Kinematic Viscometers D Test Method for Innsolubles in Used Lubricating Oils Volume 05.02,1986 D Test Metbod for Tbemal Stability of Hydraulic Fluids D Test Method for Continuity of Steam-Turbine Oil Oxidation Stability by Rotating Bomb JSL (3) $5.00+ $2.00

2 JSL 3-2 Standards 145 D Test Method for Detecting Glycol-Base Antifreeze in Used Lubricating 0 ils D Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-m Method Volume 05.03, 1986 D Method for Removing Volatile Contaminants from Used Engine Oils by Stripping The ASTM has published its 1986 Petroleum Publications Catalog describing the five volumes of the Annual Book of ASTM Standards containing over 500 standards on petroleum products, lubricants, and fossil fuels, and listing related Special Technical Publications and the Petroleum Measurement Tables. The catalogue is available free from Jacqueline Nolden, ASTM Marketing & Promotion Services, Race Street, Philadelphia, Pennsylvania 19103, USA, tel In Europe, American Technical Publishers, distributors of ASTM publications, now represent the Instrument Society of America (ISA), and the National Association of Corrosion Engineers, as well as the American National Standards Institute (ANSI) and the Society of Automotive Engineers (SAE). PETROLEUM PRODUCTS AND LUBRICANTS * Approved for use by agencies of the Department of Defense and, if indicated on the standard, replaces corresponding Federal or Military document. Volume D *D87-77 (1982) "D "D92-85 *D93-85 * D94-85 *D95-83 *D96-73 (1984) 'D97-85 'D (1982) "D ' (1978) Test method for flash point by tag closed tester Method for distillation of petroleum products Test method for melting point of petroleum wax (cooling curve) Test method for precipitation number of lubricating oils Test method for flash and fire points by Cleveland open cup Test method for flash point by Pensky-Martens closed tester Test method for saponification number by colour-indicator titration Test method for water in petroleum products and bituminous materials by distillation Test methods for water and sediment in crude oils Test method for pour point of petroleum oils Test method for drop melting point of petroleum wax, including petrolatum Methods of analysis of lubricating grease Test method for sulfur in petroleum products (general bomb

3 146 Standards JSL 3-2 D D * D * D *D (1982) * D D * D 'D (1980) D (1978) *D D (1978) * D D *D (1982) 'D D a * D * D446-85a D *D D "D (1978) *D (1976) * D *D ' (1979) * D * D "D " * D D ' ) 1983) 1982) *D * D * *D (1978) * D877-84a *D (1981) 'D (1984) * D Method for detection of copper corrosion from petroleum products by the copper strip tarnish test Test method for Saybolt color of petroleum products (Saybolt chromometer Test method for burning quality of kerosine Test method for Conradson carbon residue of petroleum products Method for distillation of natural gasoline Test method for cone penetration of lubricating grease Specification for mineral spirits (petroleum spirits) hydrocarbon dry cleaning solvent Test method for heat of combustion of liquid hydrocarbon fuels by bomb calorimeter Method of sampling petroleum and petroleum products (discontinued 1984t replaced by practice D4057 and method D4177) Method for distillation of crude petroleum (intent to withdraw) Test method for API gravity of crude petroleum and petroleum products (hydrometer Definitions of terms relating to petroleum (discontinued 1981 t) Test method for gasoline diluent in used gasolineengineoils by distillation Test method for vapor pressure of petroleum products (Reid Standard viscosity-temperature charts for liquid petroleum products Test method for existent gum in fuels by jet evaporation Specification for fuel oils Specification for automotive gasoline Test method for kinematic viscosity of transparent and opaque liquids (and the calculation of dynamic viscosity) Specification and operating instructions for glass capillary kinematic viscometers (formerly designated 02515) Method for distillation of plant spray oils Test method for sediment in crude oils and fuel oils by extraction method Test method for ash from petroleum products Test method for unsulfonated residue of petroleum plant spray oils Specification for hydrocarbon drycleaning solvents (discontinued 1984t replaced by D235) Test method for Ramsbottom carbon residue of petroleum products Test method for oxidation stability of gasoline (induction period Test method for carbonizable substances in white mineral oil (liquid petrolatum) Test method for dropping point of lubricating grease Test method for aniline point and mixed aniline point of petroleum products and hydrocarbon solvents Test method for carbonizable substances in paraffin wax Test method for neutralization number by potentiometric titration Test method for rust-preventing characteristics of inhibited mineral oil in the presence of water Test method for oil content of petroleum waxes Test method for chlorine in new and used petroleum products (bomb Methods of chemical analysis for metals in new and used lubricating oils Test method for oxidation stability of aviation fuels (potential residue Test method for sulfated ash from lubricating oils and additives Method for calculation of olefins and aromatics in petroleum distillates from bromine number and acid absorption (discontinued 1985t) Test method for dielectric breakdown voltage of insulating liquids using disk electrodes Test method for inorganic chlorides and sulfates in insulating oils Test method for foaming characteristics of lubricating oils Test method for insolubles in used lubricating oils Specification for aviation gasolines t Although this standard has been officially withdrawn from Society approval, a brief description is included for information only.

4 -. JSL 3-2 Standards 147 * D "D (1982) D ( D * D (1 984) D ~- ~ * D "D (1981) " D D D D *D ) D ) D (1976) D D (1976) D D 'D (1984) D (1982) D (1978) D (1978) * D *D (1981) D Dl D (1978) D * D D D D D D (1984) 'D (1984) "D (1977) D Test method for aromatic hydrocarbons in olefin-free gasolines by silica gel adsorption Test method for cone penetration of petrolatum Test method for congealing point of petroleum waxes, including petrolatum Test method for density and relative density (specific gravity) of liquids by Lipkin bicapillary pycnometer Test method for oxidation stability of lubricating greases by the oxygen bomb method Test method for oxidation characteristics of inhibited mineral oils Test method for interfacial tension of oil against water by the ring method Test method for evaporation loss of lubricating greases and oils Test method for neutralization number by color-indicator titration Specification for diesel fuel oils Methods for calculated cetane index of distillate fuels Test method for freezing points of highpurity hydrocarbons Test method for purity of hydrocarbons from freezing points Test method for hydrogen in petroleum fractions Test method for olefinic plus aromatic hydrocarbons in petroleum distillates (discontinued 1985t) Test method for alpha acetylenes in butadiene, butadiene concentrates, and butane-butene mixtures (silver nitrate (discontinued 1983t) Test method for oxygen in light hydrocarbon vapors (discontinued 1982t3 Test method for peroxide content of light hydrocarbons (discontinued 1984t) Test method for separation of residue from butadiene (discontinued 1984t) Test method for nonvolatile residue of polymerization grade butadiene Test method for sodium in lubricating oils and additives (gravimetric Method of gaging petroleum and petroleum products$ Method of measuring the temperature of petroleum and petroleum products$ Test method for boiling point range of polymerization-grade butadiene (discontinued 1985t) Test method for carbonyl content of butadiene (discontinued 1985t - replaced by D4423) Test methods for phosphorus in lubricating oils and additives Test method for apparent viscosity of lubricating greases Test method for acidity of distillation residues or hydrocarbon liquids Test method for water reaction of aviation fuels Test method for 1,3-butadiene in C and lighter hydrocarbon mixtures by ultraviolet spectrophotometry Idiscontinued 1985t) Test method for total inhibitor (TBC) content of light hydrocarbons Test method for bromine number of petroleum distillates and commercial aliphatic olefins by electrometric titration Method for distillation of petroleum products at reduced pressures Methods of testing hydrocarbon waxes used for electrical insulation Test method for density and relative density (specific gravity) of liquids by Bingham pycnometer Test method for refractive index and refractive dispersion of hydrocarbon liquids Methods for measurement and calibration of upright cylindrical tanks$ Standard petroleum measurement tables Test method for effect of grease on copper (discontinued 1984t) Test method for lead in new and used greases $ Due to the special nature of this method it is of interest to a limited number of users of this book; it is, therefore, not included in this book. It will not be published by the American Society for Testing and Materials but will be published by the American Petroleum Institute. Separate copies will be available from ASTM.

5 148 Standards JSL 3-2 "D (1981) * D (1 982) D * D D * D (1 98 * D D *D (198 D D * D D (1983) "D D D D Dl (1 984) D D *D (1982) D (1 984) D (1984) D (1 984) D (1984) D (1984) *D (1985) D (1985) D (1967) D D * D 'D D (1978) D (1 983) *D D Dl D a D D D (1975) Test method for leakage tendencies of automotive wheel bearing greases Test method for water washout characteristics of lubricating greases Method of sampling liquefied petroleum (LP) gases Test method for sulfur in petroleum products (lamp Test method for vapor pressure of liquefied petroleum (LP) gases (LPgas Test method for corrosive sulfur in electrical insulating oils Test method for relative density (specific gravity) or API gravity of crude petroleum and liquid petroleum products by hydrometer method Test method for flash point of liquids by tag opencup apparatus Test method for sludge formation in mineral transformer oil by highpressure oxidation bomb Test method for chlorine in new and used lubricants (sodium alcoholate Test method for sodium in residual fuel oil (flame photometric Test method for hydrocarbon types in liquid petroleum products by fluorescent indicator adsorption Test method for tensile strength of paraffin wax Test method for needle penetration of petroleum waxes Test method for smoke point of aviation turbine fuels Test method for lubricating qualities of graphites Test method for trace concentrations of lead in primary reference fuels Test method for emulsion characteristics of petroleum oils and synthetic fluids Test method for effect of copper on oxidation stability of lubricating greases by the oxygen bomb method (discontinued 1985t) Test method for cone penetration of lubricating grease using onequarter and one-half scale cone equipment Method for estimation of deleterious particles in lubricating grease Method for estimation of net heat of combustion of aviation fuels Methods for liquid calibration of tanks$ Methods for measurement and calibration of barge tanks$ Methods for measurement and calibration of spherical and spheroidal tanks$. Methods for measurement and calibration of tank car tanks$ Methods for measurement and calibration of stationary horizontal tanks$. Test method for blocking and picking points of petroleum wax Test method for low-temperature torque of ball bearing greases Test method for emulsion stability of soluble cutting oils Test method for density and relative density (specific gravity) of viscous materials by Bingham pycnometer Test method for density and relative density (specific gravity) of viscous materials by Lipkin bicapillary pycnometer Test method for ASTM color of petroleum products (ASTM color scale) Test method for vanadium in navy special fuel oil Test method for zinc in lubricating oils and additives (polarographic (discontinued 1985t) Standard ASTM butadiene measurement tables Test method for sulfur in petroleum products (high-temperature Methods for analysis of graphites used as lubricants Method for calculation of volume and weight of industrial aromatic hydrocarbons Specification for aviation turbine fuels Test method for density or relative density of light hydrocarbons by pressure hydrometer Test method for carbon number distribution of aromatic compounds in naphthas by mass spectrometry (discontinued 1985t) Test method for maximum fluidity temperature of residual fuel oil (discontinued 1985t)

6 JSL 3-2 Standards 149 *D D D Dl "D D *D * D l *D D D ) 1977) 1979) 1975) I98 I98 Volume D (1984) D D D D (1980) D D D D D (1981) D D D * D D D D Test method for thermal stability of aviation turbine fuels Test method for thermal stability of US Navy special fuel oil Test method for active sulfur in cutting fluids Method for analysis of commercial butane-butene mixtures and isobutylene by gas chromatography (discontinued 1985t - replaced by D4424) Test method for lurninometer numbers of aviation turbine fuels Test method for functional life of ball bearing greases Test method for oil separation from lubricating grease during storage Test method for corrosion preventive properties of lubricating greases Test method for water in liquid petroleum products by Karl Fischer reagent Test method for refractive index of viscous materials Test method for rust protection by metal preservatives in the humidity cabinet D (1977) Standard tables for positive displacement meter prover tanks (intent to withdraw) * D Test method for water and sediment in fuel oils by centrifuge method (laboratory procedure) * D Test method for roll stability of lubricating grease D (1982) Test method for peroxide number of petroleum wax " (19821 Test method for odor of petroleum wax *D (1985) Test method for 20deg specular gloss of waxed paper D Specification for liquified petroleum (LP) gases Specification for commercial hexanes D Test method for volatility of liquefied petroleum (LP) gases D Test method for copper strip corrosion by liquefied petroleum (LP) gases D Test method for amyl nitrate in diesel fuels * D Test method for naphthalene hydrocarbons in aviation turbine fuels by ultraviolet-spectrophotometry * D Test method for loadcarrying capacity of fluid gear lubricants Test method for separation of tetraethyllead and tetramethyllead in gasoline Test method for depentanization of gasoline and naphthas Method for isolation of representative saturates fraction from lowolefinic petroleum naphthas Method for isolation of representative saturates fraction from higholefinic petroleum naphthas Test method for modulus of rupture of petroleum wax (discontinued) Test method for sealing strength of petroleum wax (intent to withdraw) Test method for characteristic groups in rubber extender and processing oils by the clay-gel adsorption chromatographic method Test method for ultraviolet absorbance and absorptivity of petroleum products Test method for smoke density in flue gases from burning distillate fuels Test method for effect of air supply on smoke density in flue gases from burning distillate fuels Test method for residues in liquefied petroleum (LP) gases Test method for naphthenes in saturates fractions by refractivity intercept Test method for thermal stability of hydraulic fluids Method for conversion of kinematic viscosity to Saybolt universal viscosity or to Saybolt furol viscosity Method of basic calibration of master viscometers and viscosity oil standards Method for analysis of liquefied petroleum (LP) gases and propene concentrates by gas Chromatography Practice for description of types of petroleum extender oils

7 150 Standards JSL 3-2 D (1983) D (1 981 I D D D *D D I98 "D D (1980) * D D "D D D D D D D (1980) D (1985) D D D D D D "D D D D D D ) 1978) D (1981) D D D Test method for dropping point of lubricating grease over wide temperature range Test method for wear preventive characteristics of lubricating grease (four-ball Test method for aromatics in light naphthas and aviation gasolines by gas chromatography Method for analysis of highpurity n-heptane and isooctane by capillary gas chromatography Method for evaluation of white mineral oils by ultraviolet absorption Method for calculating viscosity index from kinematic viscosity at 40 and 100 C Practice for preliminary exmination of hydraulic fluids (wear test) Test method for continuity of steam-turbine oil oxidation stability by rotating bomb Test method for trace sediment in lubricating oils Test method for oxidation stability of distillate fuel oil (accelerated Test methods for particulate contaminant in aviation turbine fuels Test method for interfacial tension of electrical insulating oils of petroleum origin against water by the drop-weight method Test method for heat of combustion of hydrocarbon fuels by bomb calorimeter (high-precision Test methods for traces of volatile chlorides in butane-butene mixtures Test method for hydrogen sulfide and mercaptan sulfur in natural gas (cadmium sulfate-iodometric titration Test method for freezing point of aviation fuels Test method for color of dyed aviation gasolines Test method for hydrogen sulfide in liquefied petroleum (LP) gases (lead acetate Test method for interconversion of the analysis of C, and lighter hydrocarbons to gas-volume, liquid-volume, or weight basis Recommended practice for viscosity system for industrial fluid lubricants Test method for surface wax on waxed paper or paperboard Test method for hydrocarbon types in propylene polymer mass spectrom- etry (discontinued 1986t) Test method for hydrocarbon types in middle distillates by mass spectrometry Test method for butadiene dimer and styrene in butadiene concentrates by gas chromatography Method for determination of C, through C, hydrocarbons in gasolines by gas chromatography Test method for simulative recirculating system testing of aerospace hydraulic fluids Test method for isomer distribution of straightchain detergent alkylate by mass spectrometry (discontinued 1985t) Test method for cloud point of petroleum oils Method for calculation of viscosity-gravity constant (VGC) of petroleum oils Method for estimation of molecular weight of petroleum oils from viscosity measurements Test method for molecular weight of hydrocarbons by thermoelectric measurement of vapor pressure Test method for noncondensable gases in C, and lighter hydrocarbon products by gas chromatography Test method for ethylene, other hydrocarbons, and carbon dioxide in highpurity ethylene by gas chromatography Method for measurement of extreme pressure properties of lubricating grease (Timken Test method for adhesion of solid film lubricants Test method for thermal shock sensitivity of solid film lubricants Test method for viscosity and viscosity change after standing at low

8 JSL 3-2 Standards ~~~ ~~ (1983) D D D D D (1978) (19781 D (1985) D D D D D D D D D D * D D ) 1980) D (1982) D *D D a (1979) D D (1983) (1976) D D D D D temperature of aircraft turbine lubricants Test method for vapor-liquid ratio of gasoline Test method for coefficient of kinetic friction for wax coatings Test method for lead in gasoline, volumetric chromate method Method for separation of representative aromatics and nonaromatics fractions of high boiling oils by elution chromatography Test method for water separation characteristics of aviation turbine fuels Test method for vapor pressure of petroleum products (micro Test method fof molecular distribution analysis for monoalkylbenzenes by mass Spectrometry (discontinued 1985t) Test method for butadiene purity and hydrocarbon impurities by gas chromatography Test method for evaporation loss of lubricating greases over wide temperature range Method for measurement of extremepressure properties of lubricating grease (four-ball Method for analysis of natural gas-liquid mixtures by gas chromatography Method for calculation of certain physical properties of liquefied petroleum (LP) gases from compositional analysis Test method for lead in gasoline by X-ray spectrometry Test method for aromatic traces in light saturated hydrocarbons by gas chromatography Test method for hydrocarbon types in propylene tetramer by low ionizing voltage mass spectrometry (discontinued 1986 t ) Test method for apparent viscosity of engine oils at low temperature using the coldcranking simulator Test method for sonic shear stability of polymercontaining oils Test method for pressure blocking and picking points of petroleum wax (discontinued 1985t) Test method for hydrolytic stability of hydraulic fluids (beverage bottle Test method for sulfur in petroleum products (X-ray spectrographic Test method for electrical conductivity of aviation distillate fuels containing a static dissipator additive Test method for endurance (wear) life and loadcarrying capacity of solid film lubricants (Falex Test method for corrosion characteristics of solid film lubricants Test method for chemical composition of gases by mass spectrometry Test method for apparent viscosity of petroleum waxes compounded with additives (hot melts) Method for measuring wear properties of fluid lubricants (Falex pen and vee block Test method for water and sediment in distillate fuels by centrifuge Test method for bromine index of petroleum hydrocarbons by electrometric titration Test method for demulsibility characteristics of lubricating oils Test method for hydrocarbon traces in propylene concentrates by gas chromatography Test method for dryness of propane (valve freeze Method for calibration and operation of the alpha model LFW-1 friction and wear testing machine Test method for volatilization rates of lubricants in vacuum Test method for coefficient of friction and wear characteristics of solid film lubricants in vacuum and other controlled atmospheres (discontinued 1982t) Test method for thermal conductivity of liquids Test method for specific heat of liquids and solids Method for estimation of solubility of gases in petroleum liquids Test method for solubilitv of fixed qases in liauids Test method for compatibility of fuel oil blends by spot test

9 152 Standards JSL (1982) D D D D (1977) D (1977) D D D287Y-83 D D (1983) D D D D D D D (1983) D D (1982) D * D D (19821 'D *D D D D D D Method for measurement of extreme-pressure properties of lubricating fluids (Timken Method for measurement of extreme-pressure properties of lubricating fluids (fourball Test method for sulfur in liquefied petroleum gases foxy-hydrogen burner or lamp) Test method for trace quantities of total sulfur (Wickbold and Beckman combustion apparatus) Method for hydrocarbon types analysis of gas-oil saturate fractions by high ionizing voltage mass spectrometry Test method for lead and vanadium in gas turbine fuels (discontinued 1984t) Test method for trace metals in gas turbine fuels (atomic absorption (discontinued 1985t) Test method for hydrocarbon types in low olefinic gasoline by mass spectrometry Method for estimating apparent vapor pressures and molecular weights of lubricating oils Test method for vapor pressure-temperature relationship and initial decomposition temperature of liquids by isoteniscope Specification for gas turbine fuel oils Classification for metal working fluids and related materials Method for indicating the wear characteristics of petroleum and nonpetroleum hydraulic fluid in a constant volume vane pump Test method for reaction threshold temperature of liquid and solid materials Test method for yield stress of heterogeneous propellants by the cone penetration method Test method for boiling range distribution of petroleum fractions by gas chromatography Method for analysis of liquefied petroleum gases ILPG) by process gas ch romatography (discontinued 1982.t) Method for calculation of true vapor pressures of petroleum distillate fuels Method for calculation of liquid heat capacity of petroleum distillate fuels Method for distillation of crude petroleum (15 theoretical plate column) Test method for oxidation characteristics of extreme pressure lubricating oils Test method for gloss retention of waxed paper and paperboard after storage at 40 C (104'F) Test method for total base number of petroleum products by potentio- metric perchloric acid titration Test method for wear life of solid film lubricants in oscillating motion Test method for detecting glycol-base antifreeze in used lubricating oils Test method for low-temperature viscosity of automotive fluid lubricants measured by Brookfield viscometer Test method for D-C electrical conductivity of hydrocarbon fuefs (discontinued 1985t - replaced by D4308) Test method for explosive reactivity of lubricants with aerospace alloys under high shear Test method for trace amounts of lead in gasoline Test method for wax appearance point of distillate fuels Test method for mist spray flammability of hydraulic fluids Test method for trace quantities of sulfur in light liquid petroleum hydrocarbons by oxidative microcoulometry Specification for 2-methoxyethanol Test method for merceptan sulfur in gasoline, kerosine, aviation turbine and distillate fuels (potentiometric Test method for total nitrogen in lubricating oils by modified Kjeldahl method

10 JSL 3-2 Standards 153 D D D D (1978) D (1983) D (1983) D (1983) (1984) D D D D a D ) (1983) D D D (1981) D ) D (1984) D D (1984) D D (1984) (1985) D D (19801 D ( D (1982) D (1981) D (1981) D (1981) D D D D (1982) Test method for low levels of lead in gasoline by X-ray spectrometry Test method for salts in crude oil (electrometric Test method for phosphorus in gasoline Method for measurement of consistency of lubricating greases at high temperatures Method for measurement of extreme pressure properties of fluid lubric- ants (Falex methods) Test method for abrasion resistance of petroleum wax coatings Test method for solvent extractables in petroleum waxes Test method for apparent viscosity ot hot melt adhesives and coating materials Test method for lead in gasoline by atomic absorption spectrometry Test method for calculation of carbon distribution and structural group analysis of petroleum oils by the nd-m method Method for aromatic types analysis of gas-oil aromatic fractions by high ionizing voltage mass spectrometry Test method for undissolved water in aviation turbine fuels Test method for thermal oxidation stability of aviation turbine fuels (J FTOT procedure) Test method for total acidity in aviation turbine fuel Test method for flash point of aviation turbine fuels by Setaflash closed tester (discontinued 1982t - replaced by 03828) Practice for utilization of test data to determine conformance with specifications Test method for pumpability of industrial fuel oils Test method for sulfur in petroleum gas by oxidative microcoulometry Test method for performance characteristics of lubricating greases in ball bearings at elevated temperatures Method for evaluation of greases in small bearings Method for estimation of heat of combustion of aviation fuels Test method for acid number of petroleum products by semi-micro color indicator titration Test method for lithium and sodium in lubricating greases by flame photometer Test method for lead in gasoline - iodine monochloride method Test method for dispersion stability of new (unused) rolling oil dispersions in water Method for estimation of hydrogen content of aviation fuels Test method for total wax content of corrugared paperboard Standard rapid field test for trace lead in unleaded gasoline (colorimetric Test method for gas bubble separation time of petroleum oils Test method for torque stability wear and brine sensitivity evaluation of ball joint greases Test method for solubility of fixed gases in low boiling liquids Test method for trace nitrogen in liquid petroleum hydrocarbons (microcoulometric Test method for foam in aqueous media (blender test) Test method for quenching time of heat treating fuels (magnetic quenchometer Test method for surface wax coating on corrugated board Test method for applied coating wax and impregnating wax in corrugated board facing Test method for spontaneous heating values of liquids and solids (differential Mackey test) Test method for diesel fuel diluent in used diesel engine oils by gas chromatography Test method for gasoline diluent in used gasoline engine oils by gas chromatograp hy Test method for life performance of automotive wheel bearing grease Test method for foam in aqueous media (bottle test)