Version COPYRIGHT MARBED Srl 2007 all rights reserved ARBED CATALOG BOSCH IN LINE PUMPS

Transcription

1 C2 catalog BOSCH in line pumps Version COPYRIGHT MARBED Srl 2007 all rights reserved ARBED CATALOG BOSCH IN LINE PUMPS

2 PROFESSIONAL DIESEL VICE SERTOOLS MARBED Srl - Piazza Novelli, Milano - Italy Tel Fax info@marbed.com

3 K Bracket kit and vice for BOSCH P pumps Bracket kit and vice for BOSCH P pumps 26 kilos consisting of: 9356-K Strenghtened base mm extended rod with Ø 28 and 0 mm guide 9452-A Strenghtened bracket couple for BOSCH PES...P pumps 9266 Strenghtened bracket couple for BOSCH PES...P e P7800 pumps 9267 KDEP 2985 BH Swivel vice cradle for operative flange (all the applicable flanges are listed in AB - test bench equipment section) Flange Ø 95 for BOSCH PES...P pumps 960 KDEP 2963 BH C BH Flange Ø 07 for BOSCH PES...P pumps 9478-D BH C2..en -

4 9356-K - BRACKET KIT AND VICE FOR BOSCH P PUMPS - OPTIONAL Optional 80 mm extended rod with Ø 28 and 0 mm guide 9452-B A Swivel vice flange with rotary movement for PES...A, VA-VE, CAV, M pumps completo di ns art 9600 (A) - Piastra con sede quadra per morsa girevole 9402 Swivel vice flange for EP/VA...VE 9205 Swivel vice for B - BV pumps 9356 KDEP 299 BH C2..en - 2

5 954-B 954-B - TOOL BOX FOR LDA APPARATUS Fixture set in elegant tool box very useful for the BOSCH EP/VE rotary pump and P type repair with the addition of LDA supercharged 954-B C2..en - 3

6 954-B LDA APPARATUS The LDA apparatus, which is present on the cover of the injection pumps, allows to the pump by a diaphragm settled inside, to increase or decrease the inlet of the naphta, regarding the supercharging pressure coming from the Turbo wich operates on the diaphragm own A 960-A Pieces Comparator bearing Comparator bearing Teflon clamp Alignment slide Gauged elastic checkings Centesimal comparator Rod Gauged spacer Reduction Puller Screwdriver Bush extractor Torx bush Screwdriver torx Adjusting wrench Adjusting wrench Adjusting wrench Bush extractor and washers Percussion puller Disassembly wrench membrane C2..en - 4

7 954-B - TOOL BOX FOR LDA APPARATUS Comparator bearing 954- KDEP 088 BH Comparator bearing Teflon clamp for the clamping of helical pin membrane KDEP 02 BH Alignment slide for bush holes KDEP 03 BH Gauged elastic checkings KDEP 05 BH Centesimal comparator 0 mm stroke 9087 BH Rod for comparator KDEP 089 Gauged spacer KDEP 089 Reduction with 3 mm male thread for BOSCH comparator and 2,5 mm female for rods comparator Puller for governing pin KDEP 096 BH C2..en - 5

8 954-B - TOOL BOX FOR LDA APPARATUS Screwdriver Bush extractor KDEP 090 BH KDEP 04 BH Board clutch bush for dynamometric of screw register TORX A Screwdriver for the adjusting of screw TORX 27 sink 960-A 4 mm and 0 mm hexagonal adjusting wrench for FIAT KDEP 047 BH mm hexagonal adjusting wrench and 3 mm allen wrench 970 KDEP 048 BH mm hexagonal adjusting wrench and 4 mm allen wrench 97 Bush extractors and washers for LDA Ø 6,4 mm and Ø 6,9 mm push rod and equipped with shaped trust bearing fo "A" type (correspond to the modified) 9850 Percussion puller connector for LDA bushings 9848 Disassembly wrench for twuo teeth membrane and screwdriver 9847 KDEP 542 BH C2..en - 6

9 954-A 954-A - TOOL BOX FOR LDA APPARATUS Fixture set in elegant tool box very useful for the BOSCH EP/VE rotary pump and P type repair with the addition of LDA supercharged 954-A C2..en - 7

10 954-A LDA APPARATUS The LDA apparatus, which is present on the cover of the injection pumps, allows to the pump by a diaphragm settled inside, to increase or decrease the inlet of the naphta, regarding the supercharging pressure coming from the Turbo wich operates on the diaphragm own A 960-A Pieces Comparator bearing Comparator bearing Teflon clamp Alignment slide Gauged elastic checkings Centesimal comparator Rod Gauged spacer Reduction Puller Screwdriver Bush extractor Torx bush Screwdriver torx Adjusting wrench Adjusting wrench Adjusting wrench C2..en - 8

11 954-A - TOOL BOX FOR LDA APPARATUS Comparator bearing 954- KDEP 088 BH Comparator bearing Teflon clamp for the clamping of helical pin membrane KDEP 02 BH Alignment slide for bush holes KDEP 03 BH Gauged elastic checkings KDEP 05 BH Centesimal comparator 0 mm stroke 9087 BH Rod for comparator KDEP 089 Gauged spacer KDEP 089 C2..en - 9

12 954-A - TOOL BOX FOR LDA APPARATUS Reduction with 3 mm male thread for BOSCH comparator and 2,5 mm female for rods comparator 954- Puller for governing pin KDEP 096 BH Screwdriver KDEP 090 BH Bush extractor KDEP 04 BH Board clutch bush for dynamometric of screw register TORX A Screwdriver for the adjusting of screw TORX 27 sink 960-A 4 mm and 0 mm hexagonal adjusting wrench for FIAT KDEP 047 BH mm hexagonal adjusting wrench and 3 mm allen wrench 970 KDEP 048 BH mm hexagonal adjusting wrench and 4 mm allen wrench 97 C2..en - 0

13 COMPARATOR BEARING BOX BOSCH PUMPS Dial gauge bearing tool box to survey the delivery start on rotary and in line BOSCH pumps 9732 C2..en -

14 Comparator Bearing Box A 976-A A 986-B D3 2-E2 3-E 3-B 4-C 5-D Pieces Comparator Comparator Reduction Magnet Comparator bearing Comparator bearing Comparator bearing Comparator bearing Comparator bearing Comparator bearing Probe Probe Probe Probe Probe Probe C2..en - 2

15 COMPARATOR BEARING BOX FOR BOSCH PUMPS Centesimal comparator 5mm 9733 Centesimal comparator 0mm 9087-A BH Comparator reduction from 3 mm to 2,5 mm 976-A5 Magnet for comparator thread 2,5 950 Comparator bearing BOSCH EP/VA...B pumps thread 2x with probe 25 mm Ø 2 thread 2,5 (our ref.5-d4) 986 KDEP 2940 BH Comparator bearing BOSCH EP/VA...B pumps thread 3,5x2 986-A Comparator bearing BOSCH EP/VA...B pumps thread 2,5x 986-B KDEP 002 BH Comparator bearing BOSCH EP/VE pumps with probes: 40 mm Ø 4 thread 2,5 (our ref.3-e) 58 mm Ø 4 thread 2,5 (our ref.2-e) KDEP C2..en - 3

16 COMPARATOR BEARING BOX FOR BOSCH PUMPS Comparator bearing for BOSCH EP/VE pumps with probe 94 mm Ø 4 thread 2,5 (our ref.5-d2) 9580 Comparator bearing with probe 94 mm Ø 2 thread 2,5 (our ref.5-d) 9682 probe 52 mm Ø 2 thread 2,5 5-D3 probe 40 mm Ø 4 thread 3 2-E2 probe 58 mm Ø 4 thread 2,5 3-E two probe (our ref.3-e2) 58 mm Ø 2 thread 3 3-B Combination of two probes: our ref.4-c - 6 mm Ø 4 thread 2,5 our ref.4-c2-6 mm Ø 4 thread 3 4-C probe 94 mm Ø 2 thread 2,5 5-D C2..en - 4

17 988-K 988-K - COMPARATOR SUPPORT BOX FOR ON LINE PUMPS Box complete with universal comparator support to take dimension of rod stroke on pumps on line BOSCH P, P700, 8500, A, B, BV, MW, M, RSF and so on 988-K C 9483-K9 988-A Pieces Equalizer comparator bearing Comparator bearing A, B, BV pumps Decimal comparator Magnet Comparator bearing BOSCH P pumps Reduction for BOSCH 8500 Reduction for BOSCH MW Comparator bearing BOSCH M-RSF pumps C2..en - 5

18 988-K - COMPARATOR SUPPORT BOX FOR ON LINE PUMPS Equalizer universal comparator bearing with return spring for rod share BOSCH P, P700, 8500 pumps reductions: 8 x,5 (B, BV pumps) 20 x,5 (A pumps) 24 x,5 (P pumps) 24 x,5 (8500 pumps) Comparator bearing to survey the rod stroke for A, B, BV pumps Decimal comparator for rack rod stroke 30 mm stroke 9500 BH Magnet 950 Comparator bearing for rod stroke for BOSCH P outside thread 24 x,5 clamp with rods (our art 9502-A) included 9502 Reduction for 9502 for BOSCH 8500 pump threaded 24 x,5 inside 9502-C Reduction for 9502 for BOSCH MW pump thread 26 x,5 outside 9483-K9 Comparator bearing to survey the rod share BOSCH M, RSF (MERCEDES, FORD TRANSIT) 988-A C2..en - 6

19 970-K 970-K - COMPARATOR SUPPORT BOX FOR BOSCH P PUMPS Universal comparator supports box for delivery start on test bench and check for BOSCH P injection pumps setting on engine 970-K MW 9445-A 974-K 9682 Pieces Centesimal comparator Reduction for 974-K on BOSCH MW pumps Tool to take the delivery start with overflow Comparator support BOSCH P700 e P8500 pumps Universal on line pumps comparator support C2..en - 7

20 970-K - COMPARATOR SUPPORT BOX FOR BOSCH P PUMPS Centesimal comparator 0 mm stroke 9087 BH Comparator support to take the delivery start on all BOSCH P, P700, P8500 type R pumps and to set injection pumps on the engine. Universal tool, quick and precis, for timing pumps on trucks such as IVECO, MERCEDES, MAN, VOLVO, SCANIA and so on 974-K Reduction to be mounted on 974-K for taking the delivery start dimension on BOSCH MW pumps for IVECO EUROTEC, MERCEDES 250 TD and so on 974-MW Tool equipped with capillary hole-drilled glass to take delivery start with overflow thread 2 x,5-4 x,5 Trucks IVECO, MERCEDES ecc A Universal comparator support to take the delivery start dimension on pumps on line: A, B, BV, NN, SIMMS, PES...M, PES...RSF, BOSCH. thread 2 x,5-4 x, s use both the needle and the spring of the valve must moved. Then the pressure connector must bne removed C2..en - 8

21 004-A 004-A - TOOL PANEL FOR BOSCH A PUMPS 004-A A 6 Pieces Two wrenches Tappet lifter Pumping plier Fork Governor wrench Governor wrench Puller Comparator bearing Wrench C2..en - 9

22 004-A - TOOL PANEL FOR BOSCH A PUMPS Two wrenches (flat and shaped) to adjust the tappet nuts size A 4 mm Strenghtened tappet lift fork size A (6 pieces in panel) 9068 KDEP BH BH Plier size A for pumping elements 943 KDEP 295 BH Aluminium fork for BOSCH A pumps 9358 KDEP 294 BH EPRSV governor wrench 9707 KDEP 2998 BH EP/RSUV governor wrench 9709 KDEP 2968 BH Mass holder puller for RQV...A... adjustment 20 x, KDEP 2886 BH Comparator bearing to survey the rod stroke for A, B, BV pumps 9446 Torque convertor fixing wrench for BOSCH B/BV and P 0 and 2 mm slide 9327-A KDEP 2906 BH C2..en - 20

23 004-B 004-B - TOOL PANEL FOR BOSCH B PUMPS 004-B A 6 Two wrenches Tappet lifter Pumping plier Fork Governor wrench Governor wrench Toothed wrench Spring press 9327 Wrench 909 Pieces Puller C2..en - 2

24 004-B - TOOL PANEL FOR BOSCH B PUMPS Two wrenches (flat and curve) to adjust the tappet nuts size B 7 mm Tappet lift fork size B strenghtened (6 pieces in panel) 9067 KDEP 2922 BH Pumping plier size B 942 KDEP 2943 BH Aluminium fork for BOSCH B pumps 9357 RQV...B... governor wrench 9705 KDEP 2969 BH Diesel oil adjusting wrench hexagon plus screwdriver 995 Two teeth wrench to adjust the governor springs 958 Governor spring press 957-A KDEP 2894 BH Torque convertor fixing wrench for FIAT Mass holder puller for RQV...B... adjustment 24 x,5 909 KDEP 2872 BH C2..en - 22

25 004-QS 004-QS - TOOL PANEL FOR BOSCH RQV-RSV REGULATORS Complete tool panel for RQV-RSV regulators consisting of 25 arts 004-QS C2..en - 23

26 004-QS Tools for RQV-RSV regualtors K A Pieces Puller Puller Puller Reduction Adjusting wrench Bush Adjusting wrench Adjusting wrench Adjusting wrench Adjusting wrench Screwdriver Pressing tool Adjusting wrench Adjusting wrench LDA adjusting tool Adjusting wrench Adjusting wrench Adjusting wrench Wrench Adjusting wrench Adjusting wrench Stroke stop Spring press Adjusting wrench Puller C2..en - 24

27 004-QS - TOOL PANEL FOR BOSCH RQV-RSV REGULATORS Mass holder puller for RQV...A... adjustment 20 x, KDEP 2886 Mass holder puller for RQV...B... adjustment 24 x,5 909 KDEP 2872 Puller 3 threads: M 36 x,5 - M 26 x,5 - M 20 x,5 Dynamometric wrench reduction /2'' double square 929 KDEP 298 BH KDEP 292 BH EP/RSUV governor wrench 9709 Bush for tappet cap - size A 9065 KDEP 2973 BH EPSD governor wrench RQV..A governor wrench 9708 KDEP 2979 BH KDEP 2988 BH EPRSV governor wrench 9707 KDEP 2998 BH Adjusting wrench - FIAT 90 hex KDEP 047 BH Adjusting wrench hex. 0 + allen wrench KDEP 048 BH Tool to press plastic seal on lock nuts 838 KDEP 88 BH Adjusting wrench hex K KDEP 54 BH C2..en - 25

28 004-QS - TOOL PANEL FOR BOSCH RQV-RSV REGULATORS Disassembly wrench for two teeth membrane + screwdriver 9847 KDEP 542 BH Tool for the LDA (last type) central pin positioning (ex MERCEDES 9.44) To be used with our art KDEP 544 BH Adjusting wrench hex. 0 + allen wrench 3 97 RQV...B... governor wrench 9705 KDEP 2969 BH KDEP 2989 BH Adjusting wrench for trucks MERCEDES P700 pumps hex 27-2 teeth Ø 6-2 teeth Ø 2 - allen wrench 4 mm KDEP 578 BH teeth wrench for regular spring plate, K type KDEP 634 BH LDA adjusting wrench on CAV DPS Turbo PES...RSF stroke stop (MERCEDES 90 D-250 D) KDEP 077 BH Governor spring press 957-A KDEP 2894 BH Balancing wrenches of rotary group initial thread - 8 x, Motoring hub puller SCANIA 42 - mm 42 x,5 KDEP 2926 BH C2..en - 26

29 Other tools for BOSCH A, B, BV pumps Tappet caps striker size A e B (it includes our arts and 9543) 9407 Spare for striker size A 9542 Spare for striker size B 9543 Spare for striker for socket cap size B Spare for striker for socket cap size A Wrench for tappet cap size A Wrench for tappet cap size B Bush for tappet cap size A Bush for tappet cap size B 9064 KDEP 2949 BH KDEP 2973 BH Pumping base miller size B - Ø 7x4 Pumping base miller size A - Ø 8x4 Pumping base miller size BV - Ø 22x8 927 KDEP 2953 BH KDEP 2955 BH KDEP 2957 C2..en - 27

30 OTHER TOOLS FOR BOSCH A, B, BV PUMPS Internal ring puller for spheric bearings A, B pumps 92 Bearing puller, internal rings, couplings etc... right opening 60 mm 9048 A B Ø 36 Bare pliers size B - Ø 28 2 Universal pullers with flask and expander for bearing external ring A, B, BV pumps etc.. 90 B External rings puller A pumps pliers Ø 29 External rings puller B, BV pumps A A B Bare pliers size A - Ø 36 Bare pliers size B - Ø 28 Cradle puller for conical roller bearings for P pumps with Ø 30 shaft 907-A Cradle puller for conical roller bearings for B pumps with Ø 20 shaft 906 Cradle puller for conical roller bearings for A pumps with Ø 7 shaft 905 Rack rod stop clamp for A, B pumps 944 C2..en - 28

31 OTHER TOOLS FOR BOSCH A, B, BV PUMPS Goniometer 80, is used to check the angle shot of the control lever of the governor RQV-K 95-A BH Standard tappet press with head for nylon roller BOSCH PE...B and P pumps 9440 Aluminium fork with strenghtened springs for BV and P pumps 9638 Lever fork for tappet lifter size A Lever fork for tappet lifter size B 965 KDEP 292 BH KDEP 2896 BH Toothed wrench for inspection cap (between adj. and casing) for A pumps Toothed wrench for inspection cap (between adj. and casing) for B pumps Delivery start comparator bearing for A, B, BV pumps to apply to the tappet cap flange 968 BH Comparator bearing with a spill point pipe and extended rod with returning action for A, B, BV pumps 9682 Comparator bearing for BV pumps 26x,5 with 2 rods: our art 3-E - 58 mm, Ø 4, thread 2,5 our art 5-D3-52 mm, Ø 2, thread 2, C2..en - 29

32 OTHER TOOLS FOR BOSCH A, B, BV PUMPS Comparator bearing for BV pumps 24x,5 with 2 rods: our art 3-E - 58 mm, Ø 4, thread 2,5 our art 5-D3-52 mm, Ø 2, thread 2,5 Comparator bearing for BV pumps 2x,5-4x,5 with 2 rods: our art 3-E - 58 mm, Ø 4, thread 2,5 our art 5-D3-52 mm, Ø 2, thread 2,5 RQV...B...A standard wrench for mass holder nut RQV...B...A guided wrench for mass holder nut RQV...B...A governor wrench for mass holder nut A Guided wrench to adjust the governor spring 996 Spring press The sliding takes place on bearings thanks to a pressure without stress 957 Wrench for mass holder nut size A, B, BV eith pressure guide for autocentering RQV...B...A... governor Diesel oil adjusting extended wrench hexagon plus screwdriver Diesel oil adjusting extended wrench hexagon plus screwdriver 994 C2..en - 30

33 OTHER TOOLS FOR BOSCH A, B, BV PUMPS Diesel oil adjusting extended wrench hexagon 4 plus hexagon 7 Diesel oil adjusting extended wrench hexagon 3 plus hexagon A 993 Diesel oil adjusting extended wrench two teeth plus screwdriver 99 C2..en - 3

34 C2..en - 32

35 TOOL BOX FOR PES...M AND PES...RSF BOSCH PUMPS Tool box for disassembly and reassembly of PES...M and PES...RSF BOSCH pumps equipped with 20 pieces D 988-A A 9760 Pieces Toothed wrench Dial gauge Tappet lifter Dial gauge Bed pumping reamer Checking bell for oil seal Open box wrench Open box wrench Stroke stop C2..en - 33

36 TOOL BOX FOR PES...M AND PES...RSF BOSCH PUMPS Toothed wrench PES...RSF...M (Mercedes 90D - 250D) 9529 KDEP 044 BH PES...M dial gauge bearing of delivery start (Mercedes 220D - Ford Transit) 9454 BH Tappet lifter for PES...M...RSF - 4 cyl. and 5 cyl. (Mercedes 220D - 90D D - Ford Transit) 7 pieces unit 9238-D KDEP 563 BH SROd stroke dial gauge bearing for PES...M...RSF - 4 cyl. and 5 cyl. 6 pieces unit 988-A BH Bed pumping reamer PES...M (Mercedes - Ford Transit) Ø 2x6 mm 9333 KDEP 2956 BH Check bell for oil seal for PES...M pumps with compressed air inlet 9587 KDEP 045 BH Open box wrench for pipe nuts 7 mm 9554 Open box wrench for pipe nuts 7 mm 9554-A PES...RSF stroke stop (Mercedes 90D - 250D) 9760 KDEP 077 BH C2..en - 34

37 KW 9483-KW - TOOL BOX FOR BOSCH MW PUMPS Complete tool box for MW BOSCH pump consisting of 26 pieces 9483-KW C2..en - 35

38 9483-KW Tools for BOSCH MW pumps 9483-K K K4A 9483-K4B 9483-K K5A 9483-K5B 9483-K K K K K K K K K K K 9502-K Pieces Clamp Comparator bearing Double pipe Triple pipe Seal guide Seal Guide Timing fixture Cam tappet lifter Cam tappet lifter Spacer Extractor for brass Shaft blow puller Bearing inserter Bearing inserter Wrench Wrench Wrench Adjusting wrench Device for the survey of delivery start Comparator bearing Universal tappet presser C2..en - 36

39 9483-KW - TOOL BOX FOR BOSCH MW PUMPS Clamp for pumping group device 9483-K2 KDEP 066 BH Comparator bearing for the survey of the sleeve adjusting level, provided with gauge block (3 piece unit) 9483-K3 KDEP 06 BH Double pipe for seal test of pumping group 9483-K4A KDEP 052 BH Double pipe for seal test of pumping group Two pieces in box 9483-K4B KDEP 053 BH Seal guide for cam shaft Ø 7 mm Seal guide for cam shaft Ø 20 mm Stroke upkeeping spring device for MW pumps on MERCEDES and FIAT 9483-K5 KDEP 054 BH K5A KDEP 055 BH K5B Cam tappet lifter. It works simultaneously on two tappets, for MW pumps ex. on MERCEDES 5 cyl. Cam tappet lifter for PE (S)...MW...S000 pumps (mounted on FIAT) 9483-K6 KDEP 05 BH K7 KDEP 068 BH Spacer for pumping elements in couple 9483-K8 KDEP 057 BH Extractor for brass bushes on MW pumps (three pieces unit) 9483-K0 KDEP 056 KDEP 058 BH BH C2..en - 37

40 9483-KW - TOOL BOX FOR BOSCH MW PUMPS Shaft blow puller 9483-K3 KDEP 059 BH Couple of round nuts for camshaft and bearing inserter on MW pumps ex. on MERCEDES 5 cyl K4 KDEP 060 BH Couple of round nuts for camshaft and bearing inserter on MW pumps on FIAT Toothed wrench for adjusting MW counterweight governor 9483-K5 KDEP 069 BH K6 KDEP 55 BH Bush adjusting wrench for RPM 9483-K7 KDEP 554 BH Wrench for the governor bush adjusting 9483-K8 KDEP 558 BH Wrench to adjust the rod of accelerator level on MW pump (on MERCEDES 340) 972 KDEP 559 BH Device for the survey of delivery start of MW threaded pump, mounted on ex.fiat thread 8 x,5mm It includes the body (our art. 853-N) and reduction (our art. 953-KA) Comparator bearing for BOSCH MW pumps ex. on MERCEDES 5 cyl. threaded rod stroke 26 x,5 mm 953-K BH BH BH K BH Universal tappet presser for A/B/BV/M/MW/P pumps 980 KDEP 505 BH C2..en - 38

41 K 9483-K - TOOL BOX FOR BOSCH MW PUMPS Tool box for MW BOSCH pump consisting of 8 pieces 9483-K C2..en - 39

42 9483-K Tools for BOSCH MW pumps 9483-K K K4A 9483-K4B 9483-K K5A 9483-K K K K K K K K Pieces Clamp Comparator bearing Double pipe Triple pipe Seal guide Seal Guide Cam tappet lifter Spacer Extractor for brass Shaft blow puller Bearing inserter Wrench Wrench Wrench Universal tappet presser C2..en - 40

43 9483-K - TOOL BOX FOR BOSCH MW PUMPS Clamp for pumping group device 9483-K2 KDEP 066 BH Comparator bearing for the survey of the sleeve adjusting level, provided with gauge block (3 piece unit) 9483-K3 KDEP 06 BH Double pipe for seal test of pumping group 9483-K4A KDEP 052 BH Double pipe for seal test of pumping group Two pieces in box 9483-K4B KDEP 053 BH Seal guide for cam shaft Ø 7 mm 9483-K5 KDEP 054 BH Seal guide for cam shaft Ø 20 mm 9483-K5A KDEP 055 BH Cam tappet lifter. It works simultaneously on two tappets, for MW pumps ex. on MERCEDES 5 cyl K6 KDEP 05 BH Spacer for pumping elements in couple 9483-K8 KDEP 057 BH C2..en - 4

44 9483-K - TOOL BOX FOR BOSCH MW PUMPS Extractor for brass bushes on MW pumps (three pieces unit) 9483-K0 KDEP 056 KDEP 058 BH BH Shaft blow puller 9483-K3 KDEP 059 BH Couple of round nuts for camshaft and bearing inserter on MW pumps ex. on MERCEDES 5 cyl K4 KDEP 060 BH Toothed wrench for adjusting MW counterweight governor 9483-K6 KDEP 55 BH Bush adjusting wrench for RPM 9483-K7 KDEP 554 BH Wrench for the governor bush adjusting 9483-K8 KDEP 558 BH Universal tappet presser for A/B/BV/M/MW/P pumps 980 KDEP 505 BH C2..en - 42

45 Other tools for BOSCH M, MW pumps Comparator beariong for MW pumps mounted on FIAT 9502-KA BH Device for the survey of delivery start of MW pumps thread 8 x,5 pump mounted on MERCEDES 5 cil 953-KB Modification for delivery start on MW PE (S)... S000 ex. on FIAT - 8x,5mm 953-KA BH BH C2..en - 43

46 C2..en - 44

47 944-A 944-A - TOOL BOX FOR "P" BOSCH PUMPS Tool box for "P" BOSCH pumps equipped with 28 pieces 944-A A Pieces Toothed wrench Open toothed wrench Pumping group puller Dial gauge bearing for rod stroke Pumping group disassembly clamp Runner tappet lifte Ecentric tappet lifter Eccentric tappet lifter Reduction Dial gauge bearing to survey the delivery start level Centesimal comparator C2..en - 45

48 944-A - TOOL BOX FOR "P" BOSCH PUMPS Toothed wrench with /2'' square Open toothed wrench for pressure unions, for delivery adjustment 966 KDEP 2986 BH KDEP 2997 BH Pumping group puller with 25,5 mm high reductions 968 KDEP Dial gauge bearing for rod stroke thread 24x,5 protrusion 8 mm for pe...p pumps (clamp included - our art A) 9502 BH Pumping group disassembly clamp 973 KDEP 2962 BH Runner tappet lifter with casing guide threaded body Ecentric tappet lifter Eccentric tappet lifter with casing guide threaded body Reduction with /2'' double square 9525 KDEP 04 BH KDEP 290 BH A 9553 KDEP 292 BH PE...PS 80 pumps dial gauge bearing to survey the delivery start level connection mm 24x,5 equipped with stiffering washer (ref ) for the application on p 7800 pump Centesimal comparator - 0mm stroke 974 BH BH C2..en - 46

49 004-P 004-P - TOOL BOX FOR BOSCH P700 - P7800 PUMPS Tool box equipped with 39 pieces for the assembly and dismounting of BOSCH P700 and P7800 pumps mounted on IVECO TURBOSTAR, MERCEDES...MACK, JOHN DEERE 004-P C2..en - 47

50 004-P Tools for BOSCH P700 and P7800 pumps Pieces Tappet lifter Clamping pin Tappet pliers Coupling extractor Converter wrench Reduction Cover Tappet extractor Reduction for 9807 Tappet presser Fitting for 980 Bush Ø 30 Bush Ø 35 Spacers Drive slide Bearing inserter Pump cover inserter Oil seal inserter Ø 30 Oil seal inserter Ø 35 Bearing inserter Bearing extractor C2..en - 48

51 004-P - TOOL BOX FOR P700 - P7800 BOSCH PUMPS Tappet lifter for P pump P700 and P7800 set Tappet clamping pin for pump tightness test of P pump P700 and P7800 set Extractor for mounting and dismounting of tappet on P pump P700 and P7800 set 9800 KDEP 553 BH KDEP 57 BH KDEP 575 BH Puller coupling for mounting hub for P pump P700 and P7800m on MERCEDES 9.44, IVECO and MACK engines. Thread puller 52x,5 M, tooth 6 mm Torque convertor fixing wrench for P pump P700 and P7800 set with 2mm and 6mm slide 9803 KDEP 557 BH KDEP 555 BH Reduction for item 968 extractor for P pump P700 and P7800 set 9805 KDEP 29/3 Extractor for dismounting tappet cover of injection pump in three pieces 9807 KDEP 056 BH Reduction for item 9807 extractor for P pump P700 and P7800 set 9808 KDEP 056/0/7 BH Universal tappet presser for A, B, BV, M, MW, P pumps 980 KDEP 505 BH Special fastening for item 980 for use with tappet op P pump P700 and P7800 set and reduction for P pumps on MACK engines 98 KDEP 556 BH C2..en - 49

52 004-P - TOOL BOX FOR P700 - P7800 BOSCH PUMPS Roller bearing holder for Ø 30 shaft 985 KDEP 548 BH Roller bearing holder for Ø 35 shaft 986 KDEP 549 BH Spacer sleeves for pumping elements 987 KDEP 550 BH Drive slide bearing for cam shaft inserting 989 KDEP 568 BH IInserter for installing roller with cam shaft Ø 30 e Ø35 (two diameters are available) 9820 KDEP 55 BH Pump cover inserter and extractor 982 KDEP 554 BH Oil seal inserter on conic shaft Ø KDEP 558 BH Oil seal inserter on conic shaft Ø KDEP 559 BH Inserter for installing roller bearing on cam shaft on drive side of pump chamber 9824 KDEP 552 BH Extractor for roller bearing and external ring both on conic shaft Ø 30 and Ø KDEP 569+ KDEP 572+ KDEP 570 BH BH BH C2..en - 50

53 TOOL PANEL FOR BOSCH P700 - P7800 PUMPS Tool panel equipped with 22 pieces for the assembly and dismounting of BOSCH P700 and P7800 pumps mounted on IVECO TURBOSTAR, MERCEDES...MACK, JOHN DEERE Pieces Tappet lifter Clamping pin Tappet pliers Coupling extractor Converter wrench Reduction Cover Tappet extractor Fitting for 980 Pumping group extractor C2..en - 5

54 004 - TOOL PANEL FOR P700 - P7800 BOSCH PUMPS Tappet lifter for P pump P700 and P7800 set Tappet clamping pin for pump tightness test of P pump P700 and P7800 set 9800 KDEP 553 BH KDEP 57 BH Extractor for mounting and dismounting of tappet on P pump P700 and P7800 set 9802 KDEP 575 BH Puller coupling for mounting hub for P pump P700 and P7800m on MERCEDES 9.44, IVECO and MACK engines. Thread puller 52x,5 M, tooth 6 mm 9803 KDEP 557 BH Torque convertor fixing wrench for P pump P700 and P7800 set with 2mm and 6mm slide 9804 KDEP 555 BH Reduction for item 968 extractor for P pump P700 and P7800 set 9805 KDEP 29/3 Extractor for dismounting tappet cover of injection pump in three pieces 9807 KDEP 056 BH Special fastening for item 980 for use with tappet op P pump P700 and P7800 set and reduction for P pumps on MACK engines 98 KDEP 556 BH Pumping group puller with reduction h 25,5 mm 968 KDEP C2..en - 52

55 006-P 006-P - TOOL BOX FOR BOSCH P 8500 PUMPS Tool box for BOSCH P 8500 pumps (VOLVO, MACK etc...) 006-P Pieces Socket wrench Puller Clip Assembly tool Guide tool Press in tool Tappet holter Centering tool C2..en - 53

56 006-P - TOOL BOX FOR BOSCH P 8500 PUMPS Socket wrench 9984 KDEP 884 BH Puller 9985 KDEP 890 Clip 9986 KDEP 74 BH Assembly tool 9987 KDEP 888 BH Guide tool 9988 KDEP 886 BH Press in tool 9989 KDEP 887 BH Tappet holder 9990 KDEP 88 BH Centering tool 999 KDEP 885 BH C2..en - 54

57 Cables for electronic regulators Adapter cable for P..RE24, P..RE30, R..RE3 pumps (IVECO, SCANIA, VOLVO) BH KDEP-P400/3 Adapter cable for H..RE33, P..RE30, H..RE36 pumps (MAN) BH KDEP-P400/6 Adapter cable for P..RE30 pumps (MACK) BH KDEP-P400/7 Adapter cable for M..RE22 pumps (MERCEDES) BH KDEP-P400/9 Adapter cable for P..RE24, P..RE30 pumps (JOHN DEERE) BH KDEP-P400/0 Adapter cable for BH P..RE30, H..RE33, H..RE36 pumps (SCANIA, MERCEDES) BH Adapter cable for BOSCH PES...M pumps with RE22 regulator (MERCEDES) BH Adapter cable for BOSCH H pumps with RE33 regulator (MAN) BH C2..en - 55

58 C2..en - 56

59 TOOL PANEL FOR EDC GOVERNORS FOR BOSCH VE, MERCEDES, P, R, H PUMPS Tool panel for EDC electronic governors for BOSCH VE, MERCEDES, P, R, H pumps 007 C2..en - 57

60 007 Tools for BOSCH VE, MERCEDES,P,R,H pumps A 9992-B 9992-C 9992-D 9992-E 9992-F A 9993-B 9993-C Pieces Gauce Gauce Fixing dovice for pulse wheel Puller Puller Puller Comparator support and comparator Registering tool Checking device for EDC Checking device for EDC Checking device for EDC Checking device for EDC Checking device for EDC Registering gauce 9993 support Tool for regulation on drive lever C2..en - 58

61 007 - TOOL PANEL FOR EDC GOVERNORS FOR BOSCH VE, MERCEDES, P, R, H PUMPS Transducer ring positioning gauce Transducer registering gauce 9992 KDEP 703 BH A KDEP 70 BH Fixing device for pulse wheel 9992-B KDEP 702 BH Puller 22 x Bush puller from the governor box Governor bush puller 9992-C KDMZ 6999 BH D KDAW 9995/3+ KDAW 9995/4 BH BH E Patented comparator support complete with decimal comparator stroke 30 with double pointer for RE 30 and RE 36 governors, settable on sliding rail 9992-F WAYS OF USE Comparator zero setting Measurement dimension electromagnetic prod projection measurement dimension rack rod C2..en - 59

62 007 - TOOL PANEL FOR EDC GOVERNORS FOR BOSCH VE, MERCEDES, P, R, H PUMPS Registering tool for drive device of recycle valve of hexaust gases 9993 KDEP 79 BH Checking device for EDC regulator R pumps 8009 BH Checking device for EDC regulator R pumps 800 BH Checking device for EDC regulator R pumps to be used with 9992-B 80 BH Checking device for EDC regulator BOSCH on MERCEDES 807 BH Checking device for EDC regulator BOSCH on MERCEDES 808 BH Registering gauce for drive device of recycle valve of exhaust gases 9993-A KDEP 75 BH Support to be used with B KDEP 7 BH Tool for regualtion on drive lever 9993-C KDEP 77 BH C2..en - 60

63 TOOL PANEL FOR BOSCH H PUMPS Tool panel for H type BOSCH pumps on MERCEDES, SCANIA 008 C2..en - 6

64 008 Tools for BOSCH H type pumps H A C Pieces Tappet holder Socket wrench Assembly tool Clip Guide tool Centering tool Press in tool Puller Coupling Wrench Wrench Bearing for fuel inlet Comparator bearing Reduction Puller OR connector Wrench Fixing device couple Gange for lift settings Delivery start bearing C2..en - 62

65 008 - TOOL PANEL FOR BOSCH H PUMPS Tappet holder Socket wrench 9990 KDEP 88 BH KDEP 884 BH Assembly tool 9987 KDEP 888 BH Clip 9986 KDEP 74 BH Guide tool Centering tool 9988 KDEP 886 BH KDEP 885 BH Press in tool 9989 KDEP 887 BH Puller for 9809-H 9985 KDEP 890 BH Carda lamellar motoring joint for BOSCH H pumps cone Ø 40 suitable for the cone both short and long shaft 9809-H BH BH Wrench for tightening - 60 mm for joint 9809-H 8000 C2..en - 63

66 008 - TOOL PANEL FOR BOSCH H PUMPS Closed 2-point wrench - 36 mm for thightening 9809-H joint nut 8000-A Bearing for fuel inlet - EHAB adapter 8007 BH Comparator bearing to take the dimension of the rack rod on the governor magnet, equipped with our bearing BH Reduction unit 9502 for BOSCH 8500 pumps 24 x,5 Key puller 9502-C 8002 BH OR connector 8003 BH pin wrench 8004 BH Fixing device couple to pull out/push governor cover 802 BH Gange for lift settings 8006 BH Delivery start bearing BOSH H pumps it includes the body (our art. 853-N) and the BOSCH H reduction (our art. 8005) 8008 C2..en - 64

67 Gears Gear for the engine fly wheel rotation during the timing for IVECO Gear for the engine fly wheel rotation during the timing for IVECO A Gear for the engine fly wheel rotation during the timing for MERCEDES trucks 9499-B Gear for the engine fly wheel rotation during the timing for VOLVO trucks 9499-C Gear for the engine fly wheel rotation during the timing for IVECO 330 trucks 9499-E KDEP 50 C2..en - 65

68 GEARS Gear for the engine fly wheel rotation during the timing for RENAULT trucks 9499-F Gear for the engine fly wheel rotation during the timing for IVECO G Gear for the engine fly wheel rotation during the timing for MERCEDES-MAN trucks 9499-H Gear for the engine fly wheel rotation during the timing for IVECO EUROCARGO-EUROTEC I C2..en - 66