AUDI UK - Mandatory Special Tools List - From January 1st 2012
|
|
- Kathlyn Casey
- 5 years ago
- Views:
Transcription
1 AUDI UK - Mandatory Special Tools List - From January 1st 2012 Changes are shown in Bold Commercial Option (CO) Equipment must be able to perform the repair as per Elsa Pro Part Number: Description: Category: CO: Comments: Guide Price: Mandatory Counter-hold tool M Extractor M Fitting tool M Fitting tool M A Pliers M Extractor hook M A Engine support bracket M A /10 Hook M A /12 Shackle M A /13 Adapter M A /17 Spacer M A /20 Special hook M A /27 HEX NUT M To support the engine when removing and 4.93 installing the engine 1.6 CRD Assembly mandrel M Installing tool M Gearbox support M Punch M A Thrust ring M Thrust piece M Sleeve M Support bridge M A Wrench M A Lifting tackle M R8 Tool Mandatory Drift M Sleeve M Valve assembly tool M Tube M Thrust piece M Drift M Locking pin M A Setting bar M Dial gauge adapter M Hold down tool for bucket tappet M A Fitting sleeves M Oil seal extractor M /2 ADAPTER M Extractor hook M Drift sleeve M Thrust plate M Sleeve M Mandrel M Thrust piece M Thrust piece M Hooks M Page 1 of 14 Date Printed: 09/09/2011
2 3005 Thrust plate M Punch M Puller M Open ring spanner M Counter-hold tool M Fitting tool M A Puller M Thrust pad M Counter-hold tool M Guide pin M Centering Cylinder head removing and refitting A Q Thrust pad M Oil seal fitting tool M Hose clamps, up to Ø 40 mm M Hose clamps, up to Ø 25 mm M Camber adjusting lever M Counter-hold tool for toothed belt M Puller M Tube M Door hinge alignment tool M Assembly clip M Drift M B Spark plug socket and extension M Support M A Tensioning wedges M Drift sleeve M Sleeve M Gearbox support M Socket, 14 mm M Drift sleeve M Distance gauge M Retainer M Centring disk M Retainer M T-bar and socket, 10 mm M A Centring mandrel M Aligning gauge M Fitting sleeve M Oil seal extractor M Spindle M Pin wench M Union nut tool M U/J extension and socket, 10 mm M Gearbox support M Engine support M Thrust piece M Fitting sleeves M Allen key, long reach, 8 mm M Support M Installing Charge air cooler 1.4 TFSI Assembly tool M Counter-hold tool M Socket, 27 mm M Page 2 of 14 Date Printed: 09/09/2011
3 3264 Drift M Fitting sleeve M Fitting sleeves M Gearbox support M /1 Adjustment plates M /10 Adjustment plates M /12 Adjustment plates M /18 Adjustment plates M /19 Adjustment plates M /2 Adjustment plates M /25 Adjustment plates M /27 Adjustment plates M /28 Adjustment plates M /29 Pin M /3 Adjustment plates M /30 Adjustment plates M /31 Adjustment plates M /32 Adjustment plates M /33 Adjustment plates M /36 Adjustment plates M /38 Adjustment plates M /39 Adjustment plates M Adjusting the gearbox support stand removing 5spd manual 3282 /42 A Adjustment plates M /43 Adjustment plates M /48 Adjustment plates M /49 Adjustment plates M /5 Adjustment plates M /50 Pin M /52 Adjustment plates M /59 Adjustment plates M /8 Adjustment plates M Press tool M Selector lever gauge M A Ball joint puller M Assembly tool M Assembly tool M Tensioning lever M Ribbed belt lever M A Engine support device M Fuel pump tool M Setting tool M Socket 24 mm M Open-end spanner M Adapter M Pliers M Detaching Glowplug connectors 1.6 TDI Radio release tool M Assembly clip M Thrust piece M Door alignment tool M Thrust piece M Gearbox lifting tackle M Page 3 of 14 Date Printed: 09/09/2011
4 3337 Lambda probe open ring spanner M Pliers M Handbrake adjustment tool M Wheel bearing tube M Assembly tool M Assembly tool M A Lock cable setting gauge M Roller M Pressing on door sound absorbing sheet Multi-point bit XZN 12 M B Windscreen wiper setting tool M Diesel injection pump locking pin M Valve spring tool M Valve stem seal puller M Valve stem seal fitting tool M Chain tensioner retainer M Eye-head bolt M Front-end service sleeves M Front-end hook M Setting gauge M Thrust piece M Counter-hold tool M Pin wrench M Camshaft clamp M Locating pins M Engine bracket M Assembly tool M Adapter M Thrust piece M Removing wedge M Socket XZN 10 M Guide pins M Counter-hold tool M /2 Adaptor M To counter hold belt pully when loosening and 5.12 tightening centre bolt 3417 Oil filter tool M Camshaft bar M Assembly tool M Selector lever gauge M Selector lever gauge M Spreader M Hook M Guide pin M Camshaft clamp M Support M Pressing bearing in rear wishbone A5 Q Thrust plate M Press tool M A Clamp M Removal lever M T10001 Shock absorber set M with T10001/ T10005 Pliers M T10006 A Release tool M Page 4 of 14 Date Printed: 09/09/2011
5 T10007 A Refractometer M For checking frost protection coolant, windscreen washer fluid, battery electrolyte and Ad Blue concentration T10008 Locking plate M 3.66 T10009 Assembly tool M 8.05 T10010 Hexagon socket screwdriver 3 m M 5.82 T10011 Multi-point socket screwdriver XZ M T10012 Engine bracket M T10014 Retainer M T10015 Fitting tool M 7.43 T10016 Camshaft locking tool M T10017 Assembly tool M Installing the crankshaft oil seal 1.4 TFSI T10018 Oil seal extractor M T10019 Thrust piece M 5.92 T10020 Pin wrench M 8.46 T10022 Assembly tool M T10023 Insert tool M T10027 A Locking pin M 3.27 T10029 Assembly tool M T10030 Assembly tool M T10034 Assembly tool M T10035 Socket insert XZN 14 M T10036 Support M T10037 Puller M T10038 Tensioning strap M T10039 Release lever M T10042 Thrust piece M 8.51 T10049 Thrust piece M 5.80 T10050 Crankshaft stop M T10051 Counter-hold tool M T10052 Puller M T10053 Press sleeve M T10054 Special wrench, long reach XZN M 7.45 T10055 Puller M T10056 Assembly sleeve M 6.59 T10057 Radio release tool M 7.01 T10058 Allen key, long reach 5 mm M T10059 Shackle M T10060 A Locking pin M 3.44 T10061 Socket, multi-point bit XZN 14 M 9.29 T10063 Centring tool M T10065 Assembly tool M T10065 /5 + /6 M A5 A5 Q5 Pressing triple roller on and off drive shaft T10066 Angled ring spanner 46 mm M T10068 A Camshaft bar M T10070 Polydrive bit and socket M T10071 Assembly tool M T10072 Socket wrench TORX T20 M 5.81 T10073 Locking plate M T10074 Locking pin M T10082 Thrust piece M 6.37 T10086 Centring drift M 8.93 Page 5 of 14 Date Printed: 09/09/2011
6 T10087 Thrust piece M 4.41 T10088 Thrust piece M 4.41 T10090 Thrust piece M 3.89 T10091 Adjusting tool M T10092 Tensioning bolt M 4.11 T10093 Guide pins M T10094 A Puller M T10094 can be adapted to A T10096 Locating pins M T10097 Centring drift M 9.55 T10098 A Camshaft bar M ort T10099 Bits XZN 12 M T10100 Crankshaft stop M Crankshaft stop T10101 Adapter set for tamper-proof whe M T10103 Remover M T10103 /2 Screws M 3.55 T10105 Thrust piece M 6.54 T10109 Bracket M T10110 Locking flange M T10111 Assembly clip M T10112 A Engine Bracket M To disconnect and reconnect spark plug connectors or T10112 T10115 Locking pin M 2.58 T10117 Assembly tool M T10118 Assembly tool M All models 9.50 T10122 Fitting tool M T10122 /4 THRST PCE M Audi A8 12cy; Fitting PTFE crank shaft oil seal T10124 Fitting tool M 5.73 T10125 Socket AF 36 mm M T10128 Socket M 6.24 T10133 Tool set for FSI engines M T10133 /10 Adapter M 4.83 T10133 /11-15 Supplementary Set M 9.91 T10133 /16 Removing tool M 8.22 T10133 /17 Calibration Sleeve M Installing the support ring 1.4 TFSI 3.96 T10134 Assembly tool M T10135 Thrust piece M 3.52 T10136 Fitting tool M T10138 Thrust piece M 8.18 T10139 Thrust piece M 9.69 T10145 Piston resetting appliance M T10146 Assembly tool M T10148 Thrust piece M 6.16 T10149 Support M T10152 Socket tool M T10157 Adapter M 7.12 T10157 /1 Adapter M 5.67 T10158 /1 Socket M Q7 Tool t10159 Release Tool M T10160 Thrust piece M 5.24 T10161 Wedge M T10162 Bit XZN 18 M T10163 Puller M Page 6 of 14 Date Printed: 09/09/2011
7 T10164 Assembly sleeve M 7.73 T10165 Piston compressing tool M T10167 Adjusting tool M T10170 A Dial Gauge Adaptor M Measuring TDC 1.4 TFSI T10171 A Camshaft clamp M Locking the Camshafts for checking and adjusting timing 1.4 TFSI T10172 Counter-hold tool M A5 Q5 A4 with T10172 / T10172 /5-9 ADAPTOR M A T10173 Setting gauge M 8.44 T10174 Thrust piece M 3.22 T10175 Thrust piece M 7.63 T10176 Thrust piece M 5.72 T10177 Thrust piece M 5.32 T10178 Assembly tool M 8.57 T10179 Insert tool 18 mm M T10180 Thrust piece M 5.59 T10181 Thrust piece M 6.08 T10182 Thrust piece M 5.49 T10183 Thrust piece M 5.39 T10186 Protection sleeve M 6.12 T10187 Ball joint puller M T10188 Insert tool M T10189 Release tool M 7.92 T10198 Bit XZN 16 M 7.02 T10202 Wrench M T10203 Thrust piece M Dismanting and assembling the selector unit at 4.95 the gearbox T10205 Assembly tool M T10230 Assembly tool M T10230 /14-16 SUPPLMNTRY M T10246 Fitting tool M T10249 Sealing tool M Sealing open end clutch pipes during repair to 6.96 prevent brake fluid escaping T10252 Camshaft clamp M T10262 Frame M T10264 Angle screwdriver M A4 A5 Q5 CRD 2.58 T10265 Locking tool M A4 A5 Q5 CRD 3.64 T10268 Centring disk M 4.42 T10298 Thrust piece M 5.96 T10300 Locating pins M T10302 Guide sleeve M 4.92 T10303 Retaining bar M 9.88 T10308 Guide sleeve M 6.86 T10310 Special wrench M 8.84 T10312 Puller M 9.25 T10320 Puller M T10332 Setting tool M T10337 Gearbox support M T10338 Bracket M T10340 Locking pin M 8.88 T10352 Assembly tool M with T10352 / T10353 Thrust piece M 4.18 T10354 Thrust piece M 5.00 Page 7 of 14 Date Printed: 09/09/2011
8 T10355 Counter-hold tool M T10358 Bracket M Supporting Enging during installing and removing 5.68 cylinder head 3 and 4 Cyl diesel T10359 Engine support M T10360 Insert tool M T10361 Socket 24 mm M T10363 Adjusting tool M 8.20 T10364 Socket M T10368 Thrust piece M 0AM Gearbox 4.04 T10369 Puller M T10370 Socket 4mm M For removing and installing engine speed sender 7.61 G turbo T10373 Puller M 0AM Gearbox T10374 Calliper M 0AM Gearbox T10376 Thrust piece M 0AM Gearbox T10377 Guide sleeve M CRD 4.15 T10382 Puller M Removing Drive Shafts T10383 Wedges M Removing Door Trim T10385 Socket XZN 10 M Removing the EGR recirculation pipe 6.96 T10387 Thrust Piece M Gbox For removing front final drive shaft seal 5.82 T10388 Ring spanner 16 mm M Q7 Removing upper bolt on starter on 3.0 v6 CRD T10392 Puller M New A4 CRD Removal of Crankshaft Spur Gear T10393 Insert tool 14 mm M CRD Installing securing bolt requires T T10394 Puller M Audi A5 & A41.8 & 2.0 Removal of balancer shaft requires T10133/3 T10395 Tool set 17mm M Removing and installing DPF sensors T10395 /6 + 7 DPF Fitting tools M A3 Cab 1.6 TDI CRD Removal and installation of sensors T10395 /6 + 7 DPF Fitting tools M A3 Cab 1.6 TDI CRD Removal and installation of sensors T10402 Puller M For removal of injectors 1.6 CRD T10405 Socket T30 M Removing and installing the intake manifold TDI T10406 Guide Bolt M 3.78 T10407 Assembley Lever M T10411 Assembley Sleeve M A3 1.6 CRD - assembly of o-rings unit injectors 3.17 T10413 Support Plate M Pressing the engine away when removing and installing the 5 spd manual gearbox T10414 Camshaft Clamp M Camshaft locking Pin T10415 Puller CRD M For removal of magnetic injectors 2.0 CRD T10416 Engine support 1.2 M Removal and Installation of engine using VAG1383A T10417 Assembly Tool PTFE crank shaft M Installing crankshaft PTFE seal, 4 cyl 1.2 direct 5.59 injection T10420 Oil seal extractor M To remove shaft seal of inner input shaft 0AM T10421 Thrust Piece M To remove shaft seal of inner input shaft 0AM 6.06 T10422 Socket 10mm M For replacement of actuator with position sender for charge pressure actuator 2.0 CRD T10423 Ring Spanner 10x 12 M For replacement of actuator with postion 8.57 sender for charge position sensor 2.0 CRD T10430 Assembly Tool M Q7 Replacement of shaft seal input shaft T10431 Assembly tool M Q7 Replacement of shaft seal input shaft rear final drive T10432 Puller M Q7 - Replacement of shaft seal on rear of input shaft HAG210 T10433 Thrust Piece M Q7 - Replacement of right flange shaft oil seal final drive HAG Page 8 of 14 Date Printed: 09/09/2011
9 T10434 Thrust Piece M Q7 - Replacement of left flange shaft oil seal 6.71 final drive HAG195 T10436 Thrust Piece M Q7 - Replacement of right flange shaft oil seal 6.74 on front final drive T10444 Ball Joint Puller M Q7 - Pressing Ball pin out of suspension link T10445 Multipint xzn M Removal and installtion of 4/2 way valve with thermostat T10448 Thrust Piece M Renewal of input shaft oil seal T10449 Thrust Piece M Renewal of flange shaft oil seal 8.09 T10450 Thrust Piece M Renewal of flange shaft oil seal 8.37 T10454 Socket 10mm sloted M Replacement of actuator with position sender for charge pressure actuator T mm M T10465 REL TOOL M Releasing connector of gearbox input speed sender G182 T20097 Assembley Sleeve M 1.6 CRD Installation of sealing flange on Gearbox 5.63 side T20143 Extractor hook M T40001 Two arm puller M T40004 Adapter set for tamper-proof whe M T40005 Camshaft clamp M T40007 Thrust piece M 4.86 T40008 Thrust piece M 4.39 T40009 Tensioner wrench M 4.47 T40010 A Ball joint puller M or T40010 with T40010 / T40011 Locking pin M Block the timing Chain Tension Piston 3.11 T40012 Adapter M T40013 Lifting aid M T40015 Thrust piece M 6.11 T40016 Transportation Shackle M T40017 Lever M T40019 Oil seal extractor M T40020 Release tool M T40021 Adjusting tool M T40022 Adjusting tool M T40025 Assembly clip M 6.88 T40026 Locking pin M 6.49 T40027 Socket 8 mm M 9.39 T40028 Socket M T40029 Locking pin M T40031 Socket and key 5 mm M 8.92 T40035 Fixing M T40036 Insert tool, 18 mm M T40037 Insert tool, 14 mm M T40038 /1 Template M 2.24 T40038 /10 TEMPLATE M New A8 - Adjsuting front door 3.81 T40038 /11 TEMPLATE M New A8 - Adjusting front door 3.81 T40038 /12 TEMPLATE M New A1 Adjusting front doors 3.34 T40038 /13 TEMPLATE M Adjusting Rear Doors A8 Long 6.95 T40038 /14 TEMPLATE M Adjusting front and rear doors Audi A T40038 /15 TEMPLATE M Adjusting Rear door A6 Avant 3.47 T40038 /2 Template M 1.82 T40038 /3 Template M 1.90 T40038 /4 Template M 1.74 Page 9 of 14 Date Printed: 09/09/2011
10 T40038 /5 Template M 1.68 T40038 /6 Template M 2.13 T40038 /7 Template M TT Tool 2.59 T40038 /8 Template M New A4 Adjusting Front and rear doors 2.48 T40038 /9 Template M Audi Q5 Template awaiting price from Matra /11/08 T40039 Puller M T40040 Screw plug M 7.32 T40041 Tensioning device M T40044 Thrust piece M 7.72 T40045 Wing compensation plate M 8.07 T40047 Setting gauge M T40048 Assembly tool M T40048 /7 THRST PCE M Renewal of crankshaft oil seal at belt pulley end T40049 Adapter M T40051 Thrust piece M 3.30 T40052 Thrust piece M 3.30 T40053 Counter-hold tool M T40055 Socket M A4 A5 Q T40056 A Screwdriver T8 M 5.17 T40057 Oil outlet adapter M T40060 Adjusting pin M T40063 Counter-hold tool M T40064 Puller M CRD with T40064/ T40065 Interchangeable head 18 mm M 9.90 T40066 Interchangeable head 18 mm M 9.90 T40067 Pliers M T40068 A Union nut key M A5 Tool T40069 Locking pin M 7.04 T40070 Camshaft clamp M T40071 Locking pin M 8.86 T40072 Release tool M 9.10 T40073 Adapter set for wheel bolts M T40074 Engine support M T40075 ENGBRACKE M T40076 Engine support M T40077 Guide sleeve M 4.90 T40078 Socket 10 mm M 6.12 T40079 Special wrench M T40083 Ratchet wrench 5.5 mm M T40084 Assembly tool M T40085 Drift M 8.42 T40086 Extraction plate M T40087 Torx socket T 60 M 6.68 T40089 Thrust pieces M T40091 Engine support basic set M T40098 Locking tool M 2.63 T40104 Assembly tool M T40105 Thrust piece M 4.38 T40106 Thrust piece M 4.16 T40108 Thrust pieces M 4.22 T40109 Thrust pieces M 8.65 Page 10 of 14 Date Printed: 09/09/2011
11 T40109 /1 SLEEVE M For installtion of oil seal on propshaft slange 4.31 T40110 Thrust pieces M 4.95 T40111 Thrust pieces M 4.91 T40112 Thrust pieces M 5.20 T40113 Thrust pieces M 7.47 T40114 Thrust pieces M 5.61 T40115 Thrust pieces M 5.54 T40116 Fixing pin M T40123 A LIFT DVICE M Removal and installtion of Dual Clutch 7Spd DSG or T40123 with T40123a/1 T40133 Camshaft clamp M CAMSHAFT CLAMP T40134 Thrust piece M 6.28 T40135 Locking tool M A5 Tool - Fixing High pressure pump sproket when changing toothed belt CRD T40136 REL TOOL M Seperating Brake Servo Push Rod from Brake Pedal T40138 Release tool M A5 Tool T40139 Measuring pin M A5 Tool T40141 Thrust piece M 7.89 T40147 Pliers M A5 Tool T40148 Puller M A5 Tool For removing 12 volt socket T40154 Bit XZN M12 M A5 Tool T40159 Bit XZN 8 M T40162 A Plug M Replaces T40162 must be disposed of 7.00 T40168 A Release tool M New A5 A4 Removal of Brake light sensor T40168 can be adapted to A T40169 Assembly aid M A5 Tool 2.96 T40170 Transportation lock M A5 Tool 3.12 T40171 Centring drift M A5 Tool 7.00 T40173 Gearbox support M A5 Tool T40174 Thrust piece M A5 Tool 7.40 T40175 Hinged lever 24 mm M T40176 Puller M A5 Tool T40178 Tester M A5 Tool T40179 Gauge M New A4 A5 Adjusting Micro switch under seat 6.37 T40180 Sleeve M New A4 A5 Adjusting Micro switch under seat 2.91 T40181 Gauge M New A4 A5 Adjusting Micro switch under seat 6.16 T40183 Interchangeable Head M New A4 Tightening track rod screw fittings on subframe to prescribed torgue T40184 ASSY TOOL M To replace the bonded rubber bush with the wheel bearing housing. A5 A4 Q5 T40185 ASSY TOOL M Replace the bonded rubber bush and the hydro-bush subframe. A5 A4 Q5 T40186 ASSY TOOL M Replace front bonded rubber bush for rear final drive. A5 A4 Q5 T40187 Adjusting Tool M Setting jets of wind screen washer system T40189 THRST PCE M New A4 Gbox Renewal of rear flange shaft oil seal 6.00 T40190 THRST PCE M New A4 Gbox Renewal of right flange shaft oil seal 6.00 T40191 SPACER M Q5 & A4 For location of sliding pieces on 5.47 camshaft 4-cyl petrol direct injection T40196 Drift M Audi Q5 For sliding Sliding pieces on camshaft turbo 4v petrol T40197 HOOK/SUPP M Audi Q5 & A4 For fitting Gbox onto support clamp VW313 or enginge support VAS 6095 using support plate VW309 OB5 7psd DSG T40198 ASSY TOOL M Renewing oil seal for input shaft 7 Spd DSG Page 11 of 14 Date Printed: 09/09/2011
12 T40199 GUIDE PIN M For removal and installation of oil sump 7.44 T40204 Plug crd M Checking open injector units A4 A5 Q5 TT A T40206 Gearbox support M To mount G box and supercharger to VW 313 and VAS A4 A5 R8 T40207 HOOK M New A8 - to remove analogue clock 6.24 T40213 Puller for ATF Supply M A4, A5, A5 Cab, Q5 0B2 Gearbox assembly and dismantle T40214 SUPPORT M A4, A5, A5 Cab Q5-0B2 assembly and dismantling T40215 C/HOLD TL M A4. A5, A5 Cab, Q5 0B2 Gearbox Lossening of output shaft T40216 GUIDE PIN M A4, A5, A5 Cab, Q5-0B2 Gearbox Installation 4.51 of selector shaft T40217 C/HOLD TL M A4, A5, A5 Cab, Q5-0B2 Gearbox Loosening of side shaft T40219 DISMBLY TL M A4, A5, A5 Cab, Q5 - Removal and installtion of 8.58 window seals T40220 Jointed wrench M For removal and installtion of catalytic converter T40225 REMVL_TL M New A8 - Disconecting breather line on fuel tank 9.15 T40227 LOCK PIN M New A8 - to lock crankshaft via belt pully T40231 RMVL TOOL M Removal of Side windows T40232 REMV TOOL M New A8 - Separate Air Con refrigerent lines T40236 ASSY TOOL M New A8 - Remove and install peened triple roller joints AAR3700i, used with VW771 T40237 Locking Pin CRD M New A8 - to lock camshaft via sump 4.2 CRD 6.05 T40238 ASSY TOOL M New A T40239 ASSY TOOL M New A8-0BL renew shaft seal on output shaft 8.99 T40240 THRST PCE M New A8-0BL renew shaft seal on torque converter 7.86 T40241 INSERT M New A8 - Removal and installation of impact element T40242 LCKING PIN M New A8 - Locking subframe T40245 TOOL M Audi Q7 Locking chain sprocket on high pressure 3.15 pump T40246 MNTNG BRKT M To Secure chain tensioner 3.0 4v GenII T40247 ASSY TOOL M T40248 TOOL M Counter hold shaft on high pressure pump Gen Tdi T40249 EXTRACTOR M A8 12 cyl - removal of crankshaft oil seal belt pully T40250 THRST PCE M A8 12 cyl - installtion of cyclinder head cover seal 9.35 T40251 ASSY TOOL M A8 12cyl - installation of crankshaft oil seal, belt pully end T40252 WRENCH M A5 Coupe - removal of front silencer T40253 ASSY TOOL M A7 - lowering rear axel subframe to remove and install bonded-rubber mounting T40256 FUNNEL M ALL diesel EU6 and BIN 5 - opening incorrect 5.43 fuel protection device T40260 THRST PCE M Replacing oil seal for clutch housing 8.81 T50001 Socket 8mm M 4.32 T MM BIT M Removal and installtion of Brake pads on double 8.61 piston calipers VW 191 Crankshaft seal installing tool M VW 207 C Drift M 6.41 VW 210 V and toothed belt tester M VW 222 A Drift M VW 228 B Puller M VW 244 B Fitting sleeve M VW 295 Drift M Page 12 of 14 Date Printed: 09/09/2011
13 VW 309 Retaining plate M VW 353 Gearbox support M VW 387 Universal dial gauge bracket M VW 388 Adjustable measuring lever M VW 391 Drive flange installing tool M VW 407 Press tool M VW 409 Press tool M VW 411 Press tool M VW 412 Press tool M VW 415 A Tube M VW 416 B Tube M VW 418 A Tube M VW 420 Tube M VW 421 Tube M VW 422 Tube M VW 423 Tube M VW 426 Tube M 7.78 VW 431 Thrust piece M VW 432 Thrust piece M VW 433 Thrust piece M VW 434 Thrust piece M VW 436 A Guide pin, conical M VW 439 Guide pin, shouldered M VW 441 Support M VW 442 Thrust piece M VW 447 H Thrust plate M VW 447 I Thrust plate M VW 454 Thrust piece M VW 455 Installing sleeve M VW 459 Removing and installing tool M VW 511 Thrust pad M VW 519 Tube M VW 522 Support sleeve M VW 540 Engine and gearbox support M VW 541 /1 A Valve lever M VW 541 /5 Thrust piece M VW 541 /6 Thrust piece M VW 558 Clutch counter-hold tool M VW 653 /3 Pressure hose M VW 785 /1 B Retaining tool M R8 Centres A /7 Adapter R8 R8 Tool Mandatory Lifting tackle R8 R8 Tool Mandatory T10238 Release tool R8 R8 Tool Mandatory 4.86 T10240 Release tool R8 R8 Tool Mandatory 5.43 T40137 Support R8 R8 Tool Mandatory T40140 Ball joint puller R8 New R8 Removal of upper suspension link T40142 Brake resetting appliance R8 R8 Tool Mandatory T40143 Support R8 R8 Tool Mandatory T40146 Turning over tool R8 R8 Tool Mandatory T40150 Gearbox support R8 R8 Tool Mandatory T40151 Centring drift R8 R8 Tool Mandatory Page 13 of 14 Date Printed: 09/09/2011
14 T40152 Thrust pieces R8 R8 Tool Mandatory T40153 Thrust pieces R8 R8 Tool Mandatory T40155 Retaining band R8 R8 Tool Mandatory T40156 Open end spanner insert, AF 27 R8 R8 Tool Mandatory T40161 Release tool R8 New R8 Renewal of unions on selector for R Tronic T40172 Pliers R8 R8 Tool Mandatory T40177 Tensioning device R8 R8 Tool Mandatory T40208 SOCKET 38 R8 hex nut for sync hub and gear wheel for reverse gear. R8 T40209 WRENCH R8 Dismantling grooved nuts input shaft. R T40210 WRENCH R8 Dismantling and mounting grooved nuts pinion shaft. R8 T40211 SUPPORT R8 Lift output shaft from the housing and attach to VAS 6095 or VW313. R8 T40234 ADAPTOR R8 R8 Spyder - Removal and installtion of convertible hard top module, use with 3033 T40235 LOCK R8 R8 spyder - Removal and installtion of convertible hardtop module Hire Scheme T40182 Tester for checking elongation of UKHP New A8 Checking of elongation of chain links - tool for loan Total price: 20, Page 14 of 14 Date Printed: 09/09/2011
AUDI NDK KIT Details Sr. No. Part No. Part Description Quantity
AUDI NDK KIT Details Sr. No. Part No. Part Description Quantity 1 1561/25 SAWBLADE,63MM 1 2 1274/10 PIPE 1 3 1397 A TURBOCHARGER TESTER 1 4 1402 POWERSTEERINGTESTAPPLIANCE 1 5 1274/B COOLING SYSTEM TESTER
More informationAUDI UK - Mandatory Workshop Equipment List - From March 31st 2012
From arch 31st 2012 : Diagnostic machines -1 per 3 techs (excluding apprentices), VAS 5051B or VAS 5052A / VAS 6150 plus a VAS 6356 Test Box Wing Front Protectors, Steering Wheel Seat Covers - 1 per 1
More informationNew Product Guide. See the new Sykes-Pickavant catalogue for further details! Service & Diagnostics. Engine CAT054
Product Catalogue See the new Sykes-Pickavant catalogue for further details! CAT054 New Product Guide Engine 314050 Petrol Compression Tester Set - for Deep Seated Plug Ports Page 11 314270 Page 13 314295
More informationCooling system components, removing and installing
19-1 Cooling system components, removing and installing Note: When the engine is warm the cooling system is under pressure. If necessary release pressure before starting repair work. Hoses are secured
More informationMicrofichesExcel. Tavola Posizione Codice Quant Ing
Tavola Posizione Codice Quant Ing 1 1 T1P52MI-A-011200 1 LH Crankcase 1 2 T1P52MI-A-011300 1 RH Crankcase 1 3 T11119 1 Crankcase gasket 1 4 TOR00037 4 Screw M5 6 1 5 T1P52MI-011400 2 Bush 1 6 T11118 2
More informationEngine, disassembling and
Page 1 of 38 13-1 Engine, disassembling and assembling Lock carrier, moving into service position Special tools and equipment 3369 support tool 1 - Bolts 2 - Bolts 3 - Bolts 4 - Bolts 5 - Bore 45 Nm (33
More informationVolkswagen Audi Group FSi/TFSi. Engine timing tools K
Engine timing tools Volkswagen Audi Group 1.4 1.6 2.0 2.4 3.2 FSi/TFSi K 10535 www.kamasatools.com I Plan Layout A N L K E C Q G O P J F R M D S B H Ref Oem Ref. Description A MM 23044 04Z B MM 23161 93
More informationClutch Repairs (465) Copyright GEDORE Automotive GmbH, Germany. formerly
Copyright GEDORE Automotive GmbH, Germany (465) -01 KL-0500-45 KA Clutch Tool Set (SAC), in a Plastic Storage Case (Pat.) Suitable for Self-Adjusting Clutches (with 6 and 8 bolt holes); e.g. on VW-Audi,
More informationEngine Dismantle and Assemble ( )
Engine Dismantle and Assemble ( 34 8) Special Tools 5 053 Slide hammer 47 Vibration damper remover 47 5053 00 Splined head socket, cylinder head bolts 87 Mounting stand with geared drive 00 059C Installer
More informationRemoving and installing cylinder head
31 30 29 28 27 26 25 24 23 22 1 2 3 11 12 10 4 9 5 6 7 8 Removing and installing cylinder head Checking compression pressure page 15-24. Notes: When installing a replacement cylinder head with a mounted
More informationS/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly
1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/
More informationPull out clutch E snap ring and withdraw complete clutch pack of clutch E. 6 HP 26 ZF Getriebe GmbH Saarbrücken CD
Press down cup spring in the mandrel press with assembly bracket 5x46 002 566 and remove snap ring with suitable pliers. Take out planet carrier and cup spring. Take the O-ring seal off the planet carrier.
More informationM162 ENGINE MECHANICAL
SECTION 1B1 M162 ENGINE MECHANICAL CAUTION: Disconnect the negative battery cable before removing or installing any electrical unit or when a tool or equipment could easily come in contact with exposed
More informationSMF / DSF / DTF SMF / DSF / DTF 200
2006 SMF / DSF / DTF 200 1 The drawings in this parts book have been scaled so that parts can be easily recognized. 1 CYLINDER ASSY 2 CYLINDER ASSY Ref # Part # Description 1 410 0001A CYLINDER HEAD COVER
More informationCylinder Head, Remove and Install (Z 22 SE)
Page 1 of 29 Cylinder Head, Remove and Install (Z 22 SE) Remove 1. Open the bonnet. 2. Disconnect the battery. 3. Open the engine cover (1). 4. Detach the engine cover. 6 bolts (2) and (3) 5. Release the
More informationTechnical data. Part Thread (mm) Nm ±10% Tolerance Sidestand
section 3 - Torque settings Frame torque settings Sidestand Stand sensor bolt 5 Pre-applied threadlocker Stand plate fixing screw M10x25 43 Pre-applied threadlocker Side stand fastening pin Side stand
More informationPage 1 of HP B&S Vanguard Engine
1405 Page 1 of 41 14 HP B&S Vanguard Engine 1405 Page 2 of 41 14 HP B&S Vanguard Engine Ref # Part Number Qty S/P/F Description BS-28Q777-0647-E1 1 14 HP B&S Vanguard Engine 1 BS-496412 1 Cylinder Assembly
More informationMAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
More informationS/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly
1170 S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 2 of 48 42" Cutting Deck Assembly 4 683-0254 1 S Deck Adjustment Bracket w/ Weld Nut 9 710-0528 1 /P Hex Cap
More informationPARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes a
PARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes 50 24 24 24 24 38 1a Perforated Strip 19 holes 12 6 6 6 6 16 1b Perforated
More informationTiming Chain - Renew ( )
«Scorpio '95 Table of Contents» «Section 21: Engine» «Subsection 21-05: 2,9 V6 24V Cosworth Engine» «REMOVAL AND INSTALLATION» Timing Chain - Renew (21 314 0) Special Tools 21-140-01Adaptor for 21-140
More information396 Series - General Parts
MTU - Product Code 31-48 - 51 396 Series - General Parts Item Description Product_ Code On Hand Qty 0000535858 VALVE STEM SEAL 31 105 0165314283 BAYONET COUPLING 31 2 0165313783 BAYONET COUPLING 31 4 0165310683
More informationE70PL4EEC 1999 : CAMSHAFT [1/23] Page 1 of 49
E70PL4EEC 1999 : CAMSHAFT [1/23] Page 1 of 49 E70PL4EEC 1999 : CAMSHAFT [1/23] 1 5030657 1 CAMSHAFT 2 5030658 1 PLATE, Camshaft thrust 3 5030549 1 SEAL, Camshaft 4 5030989 2 BOLT, Plate 5 5030663 8 ARM,
More informationDISASSEMBLY. Engine. CAUTION: Remove the cylinder heads before removing the crankshaft. Failure to do so can result in engine damage.
303-01A-1 DISASSEMBLY Engine Special Tool(s) Remover, Crankshaft Vibration Damper 303-101 (T74P-3616-A) Special Tool(s) Crankshaft Socket 303-674 303-01A-1 Remover, Crankshaft Vibration Damper 303-773
More informationVolkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 13 Engine-Crankshaft, Cylinder block (Page GR-13)
13 Engine-Crankshaft, Cylinder block (Page GR-13) Engine, disassembly and assembly 10-222 A/21 guide from 10-222 A support tool, modifying Ribbed belt, removing and installing Semi-automatic toothed belt
More informationMotorcycle parts compatibility on ebay.co.uk
Motorcycle parts compatibility on ebay.co.uk Review the full list of categories and subcategories in which you can list motorcycle and scooter parts. Last updated: 10 August 2016 Motorcycle Parts (10063)
More informationGear change & shift cables Gearchange balljoints and bushes. Globes 12 and 24 volt Grilles
A Accessories Air Bags Air compressor assembly and components Air conditioner idler pulleys and condensers Air dryer assemblies and repair kits Air filter elements Air master assembly and repair kits Air
More informationRemoving and installing cylinder head Removing, installing and tensioning toothed belt
Page 1 of 10 Removing and installing cylinder head Removing, installing and tensioning toothed belt Special tools, workshop equipment, test and measuring appliances and auxiliary items required 3359 Locking
More information650 H1 TRV EFT MODEL NUMBER A2008TBS4BETI (RED) MODEL NUMBER A2008TBS4BETM (GREEN) MODEL NUMBER A2008TBS4BETJ (CAT GREEN)
2008 650 H1 TRV EFT Illustrated Parts Manual MODEL NUMBER A2008TBS4BETI (RED) MODEL NUMBER A2008TBS4BETM (GREEN) MODEL NUMBER A2008TBS4BETJ (CAT GREEN) (VADA644AV80X05001 - VADA644AV80X05250) MORE TO GO
More informationNo. Description No. Descreption
1 Handle Bar 14 Hex. Bolt with Flanged Face M6x25 2 Throttle Body 15 Hex. Bolt with Flanged Face M6x20 3 Plastic Piece for Throttle Cable 16 Adjusting Screw 4 Upper Throttle Body Housing 17 Tightening
More informationSSR200 Zongshen 200cc Dirt Bike (VIN PREVIX LZSJ)
Page 1 of 19 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > SSR200 Zongshen 200cc Dirt Bike (VIN PREVIX LZSJ) SSR200 Zongshen 200cc Dirt Bike (VIN PREVIX LZSJ) SSR200 Zongshen
More informationPistons and Connecting Rods, Remove and Install
Page 1 of 46 Pistons and Connecting Rods, Remove and Install Remove 1. Open the bonnet. 2. Disconnect the battery. 3. Open the engine cover (1). 4. Detach the engine cover. 6 bolts (2) and (3) 5. Release
More informationE50PL4SSC 4-Stroke, Elec Start, TNT, 20 IN. shaft 2000 : CAMSHAFT & TIMING [1/21] Page 1 of 44
E50PL4SSC 4-Stroke, Elec Start, TNT, 20 IN. shaft 2000 : CAMSHAFT & TIMING [1/21] Page 1 of 44 E50PL4SSC 4-Stroke, Elec Start, TNT, 20 IN. shaft 2000 : CAMSHAFT & TIMING [1/21] 1 5031326 1 CAMSHAFT, Intake
More informationPart No. Part No. Part No. Part No. Part No. Description
Model T Tool List Part No. Part No. Part No. Part No. Part No. Description L4681 Lug nut speed wrench - Walden Worchester T1243 Headlight rim removal tool T1349 Hub cap wrench T1387 Adjustable wrench T1902
More informationCylinder head, removing and
Page 1 of 35 15-2 Cylinder head, removing and installing Note: Replace cylinder head bolts. Always replace self-locking nuts, bolts as well as gaskets and O-rings. After installing a replacement cylinder
More informationVespa LX 50 4valvole. Refitting the valves. Inspecting the cam shaft. Characteristic. Engine
Refitting the valves - Lubricate the valve guides with graphite grease. - Place the lower caps of the valve spring on the head. - Use the punch to fit the 4 sealing rings one at a time. - Fit the valves,
More informationFRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES
FRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES 0747-506 1 2506-107 1 Rack, Front - Assembly (inc. 2) 2 0411-576 1 Decal, Warning - Load 3 0441-592 4 Bushing 4 8410-835 4 Screw, Cap 5 0423-669 4 Spacer
More informationTiming Chain Renew ( ) Renew. Section Title. Special Tools. Proprietary Tools Scraper Engine support bar
Timing Chain Renew ( 34 0) Special Tools 40 400 40 Engine support bar 40 0 Adaptor for -40 40 03 Adaptor for -40 Proprietary Tools Scraper Workshop Equipment Transmission jack Materials Cable ties Sealer
More informationValve gear, servicing
Page 1 of 62 15-1 Valve gear, servicing WARNING! Do not re-use any fasteners that are worn or deformed in normal use. Some fasteners are designed to be used only once, and are unreliable and may fail if
More informationTECHNICAL BULLETIN S /00. S-TYPE Essential Tools Specifications SERVICE DATE 2000 MY-ON S-TYPE MODEL VIN L00001-ON
SERVICE DATE 03/00 TECHNICAL BULLETIN S-TYPE Essential Tools Specifications MODEL VIN S100-01 2000 MY-ON S-TYPE L00001-ON Issue: The Service Tools required for the S-TYPE Sedan are listed below, which
More information71253, XL 440H Lawn Tractor, 2008 (SN ) : BLOWER HOUSING ASSEMBLY BRIGGS AND STRATTON MODEL 31P E1 [1/
71253, XL 440H Lawn Tractor, 2008 (SN 280000001-280999999) : BLOWER HOUSING ASSEMBLY BRIGGS AND STRATTON MODEL 31P777-0133-E1 [1/ Page 1 of 50 71253, XL 440H Lawn Tractor, 2008 (SN 280000001-280999999)
More information11/14/ U. Baja Motorsports Inc. P.O. Box Phoenix, AZ Toll Free: PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 53
250U Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 53 FIG. 1 PNEUMATIC MECHANISM 1-1 250U-100 883099019951 CAMSHAFT 1 1 1-2 250U-101 883099019968 KEY, WOODRUFF 1 1 1-3 250U-102 883099019975
More informationSCdefault. 900 Installation instructions
SCdefault 900 Installation instructions SITdefault Sports chassis MONTERINGSANVISNING INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG INSTRUCTIONS DE MONTAGE Accessories Part No. Group Date Instruction Part
More informationEngine Dismantle and Assemble ( )
Engine Dismantle and Assemble (2 34 8) Special Tools 2-036A Remover for pilot bearing 2-37 Oil seal installer/aligner 237 2036A 2-044A Installer/Aligner, Pilot Bearing/Clutch Plate 244 2-44 Inlet manifold
More informationSpare parts catalogue 695 U.S.A. DUCATIMONSTER
Spare parts catalogue 95 U.S.A. DUCATIMONSTER GENERAL INFORMATION The present spare parts order exactly the right spare parts When ordering specify: ) the part's code number followed by its description;
More informationCOUNTER SHAFT NUT LOCKING PLATE 1 $ HOIST DRUM CLUTCH EYE BOLTS 1 $ LEFT DRUM CLUTCH THREADED PIN 2 $ 138.
1 2184 PULLEY FOR RADIATOR FAN 1 $ 326.25 2 2184 PULLEY FOR RADIATOR FAN 1 $ 326.25 3 3331 REAR DRUM BRAKE RETURN SPRING 5 $ 51.31 5 10285 LEFT REAR DRUM BRAKE AIR CAN REACH ROD ( LONG ROD ) 1 $ 85.12
More informationRemoving and installing parts of the lubrication system Removing and installing parts of the lubrication system
Side 1 av 15 Removing and parts of the lubrication system Removing and parts of the lubrication system Notes: If large quantities of metal particles or other deposits (caused, for example, by partial seizure
More informationGroup 1: Gearbox housing
1 Five-Speed gearbox crown wheel 11 Nylon socket for speed- 21 Screw 31 Tube 2 Plug 12 Cup 22 Screw 32 Deflector 3 Gearbox and clutch housing 13 Pinion f. speedometer 23 Screw 33 s 4 Front cover 14 Stop
More information14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor
14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 2 of 28 Carburetor TC-640221 1 /P Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640216 1 Throttle Shaft & Lever Assembly
More informationDisassembling and assembling transmission
27-640 Disassembling and assembling transmission Preceding work: Removing and installing transmission with torque converter (27-600). Operation number of operation texts and operation values or standard
More informationIllustrated Parts List to
Illustrated Parts List Model Series 171400 to 171499 TYPE NUMBERS 0035 through 0131, 0235, 0249, 0270, 0300 through 0308, 0435 through 0470, 0500 through 0505, 0520 through 0535, 1035, 1049, 1070, 1100,
More informationD-1:CYLINDER HEAD. DESCRIPTION C 4 2 Cover, Cylinder Head 3 Gasket 4 Breather, Crankcase, Lower A
CROSSLAND 300 D-1:CYLINDER HEAD 1 Bolt 96000-060258-08C 4 2 Cover, Cylinder Head 1230950A-000 1 3 Gasket 1230350A-000 1 4 Breather, Crankcase, Lower 1230250A-000 1 5 Screw 93903-1040088-00K 4 6 Gasket,
More informationPARTS CATALOGUE EARTHLANDER REVISED 02/25/05
PARTS CATALOGUE EARTHLANDER 200 REVISED 02/25/05 INDEX ENGINE FRAME SECTION FIG # SECTION FIG # FAN COVER, SHROUD E01 FRAME F01 CYLINDER HEAD COVER E02 PLASTIC COVERS F02 CAMSHAFT,VALVE, CYLINDER HEA E03
More information2003 Volkswagen Passat GL
2001-03 AUTOMATIC TRANSMISSIONS Removal & Installation - 01V APPLICATION TRANSAXLE APPLICATION Application Transaxle Model Passat 1.8L (FWD) 01V 2.8L (FWD & 4WD) 01V 4.0L (AWD) 2002-03 01V REMOVAL & INSTALLATION
More information700 DIESEL EFT MODEL NUMBER A2008TBT4DETI (RED) MODEL NUMBER A2008TBT4DETM (GREEN) (VADA7D4AV80X VADA7D4AV80X10493) MORE TO GO ON.
2008 700 DIESEL EFT MODEL NUMBER A2008TBT4DETI (RED) MODEL NUMBER A2008TBT4DETM (GREEN) (VADA7D4AV80X10001 - VADA7D4AV80X10493) MORE TO GO ON. TM TABLE OF CONTENTS 2008 ATV 700 Diesel EFT Red (Model No.
More informationATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 1 of 56 AIR INTAKE ASSEMBLY
2011 ATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 1 of 56 AIR INTAKE ASSEMBLY 2011 ATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 2 of 56 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-705
More informationOriginal parts TRi / 280 / Factory R
Original parts TRi 0 / 0 / Factory R Contents: page: Cycle part: Part : Frame Part : Steering Part : Front wheel Part : Swing arm Part : Rear wheel 0 Part : Plastics Part : Admission Part : Cooler Part
More informationBMW HIGHLIGHTS BMW / / Repair set, crankcase breather /
BMW HIGHLIGHTS BMW Turbo chager Turbo chager M 47, N47 M57 08.14.054 / 11 65 7 794 144 E 46, 60, 61, 83, 87, 90, 91 08.14.055 / 11 65 2 248 906 E38, 39, 46 Repair set, crankcase breather Repair set, crankcase
More informationORIGINAL PARTS TRi 2014
ORIGINAL PARTS TRi 204 CONTENTS PAGE Cycle part: Part : Frame 2 Part 2: Steering 4 Part 3: Front wheel 6 Part 4: Swing arm 8 Part 5: Rear wheel 0 Part 6: Plastics 2 Part 7: Admission 4 Part 8: Cooler 6
More information2002 Explorer Sport/Sport Trac Workshop Manual
Page 1 of 17 SECTION 303-01: Engine 4.0L Single Overhead Camshaft (SOHC) IN-VEHICLE REPAIR Procedure revision date: 07/13/2005 Cylinder Head Special Tool(s) Spark Plug Wire Remover 303-106 (T74P-6666-A)
More informationATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY
2006 ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY 2006 ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 2 of 60 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-005
More informationOriginal parts TR280i 2013
Original parts TR0i 0 Contents: page: Cycle part: Part : Frame Part : Steering Part : Front wheel Part : Swing arm Part : Rear wheel 0 Part : Plastics Part : Admission Part : Cooler Part : Exhaust Motor
More informationEngine and A4LDE Automatic Transmission Remove and Install ( ) Remove
Engine and A4LDE Automatic Transmission Remove and Install ( 3 0) Special Tools 068A -068A Engine lifting bracket -540 Bolt tightening angle gauge Workshop Equipment Transmission jack Workshop crane Assembly
More informationWarranty Information. Summary of parts covered. The warranty experts
Warranty Information Summary of parts covered The warranty experts 2 Star Cover This cover applies to vehicles over 1,000. valves and decokes), cylinder head (excluding cracks and overheating damage),
More informationATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 1 of 60 AIR INTAKE ASSEMBLY
2008 ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 1 of 60 AIR INTAKE ASSEMBLY 2008 ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 2 of 60 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-005
More informationFigure 1. - Cylinder / Cylinder Head
Page 1 of 42 Figure 1. - Cylinder / Cylinder Head Figure 1. Cylinder / Cylinder Head 1 11111-STG-00 Cylinder comp 1 2 11121-STG-00 Head comp, cylinder 1 3 11127-CHP-00 Nut, cylinder head 1 4 11141-ROA-00
More informationIllustrated Parts Manual. Model Number A2011ICS4BUSG (Green) A2011ICS4BOSG (Green - International)
Illustrated Parts Manual 2 1 10 650 Model Number A2011ICS4BUSG (Green) A2011ICS4BOSG (Green - International) S H A R E O U R PAS S IO N. TM TABLE OF CONTENTS 2011 ATV 650 Green (Model No. A2011ICS4BUSG)
More informationDVX 90 MODEL NUMBER A2008KSB2BUSD (BLACK-RED) MODEL NUMBER A2008KSB2BUSE (BLACK-CAT GREEN) MORE TO GO ON. TM
2008 DVX 90 Illustrated Parts Manual MODEL NUMBER A2008KSB2BUSD (BLACK-RED) MODEL NUMBER A2008KSB2BUSE (BLACK-CAT GREEN) MORE TO GO ON. TM TABLE OF CONTENTS Black-Red (Model No. A2008KSB2BUSD) Black-Cat
More informationPARTS MANUAL. Time Saver Wide Cut Mower. I N E CUB G E N U
PARTS MANUAL Time Saver Wide Cut Mower G E N U FAC TORY I N E PARTS 1-800-965-4CUB www.cubcadet.com FORM NO. 69-03049 PRINTED IN U.S.A. CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 1/29/200
More informationIllustrated Parts List to
TYPE NUMBERS 0022 through 0035, 0040 through 0062, 0070, 0076,0100, 0102, 0120 through 0125, 0307, 0318,0320, 0326, 0340 through 0366, 0370 through 0378, 0382, 0385, 0390, 0391, 0394, 0398, 0402, Illustrated
More informationEngine timing tools. VAG TFSi FSi K 10548
Engine timing tools VAG TFSi FSi 2.0 K 10548 www.kamasatools.com Plan Layout A D B E F C Component Identification Ref Oem Ref. Description A T10020 Tension Wrench B T40011 Tensioner Pin C T10252 Camshaft
More informationProwler XTX SHARE OUR PASSION ṬM
SHARE OUR PASSION ṬM Prowler XTX Model Number U2009P3T4EUSV (Steel Blue) Model Number U2009P3T4EOSV (Steel Blue) International Model Number U2009P3T4EUSC (M4 Camo) Model Number U2009P3T4EUSQ (Black - LE)
More information400 4x4 Euro MODEL NUMBER A2008IDG4BEUR (RED) MODEL NUMBER A2008IDG4BEUG (GREEN) MODEL NUMBER A2008IDG4BEUZ (CAT GREEN) MORE TO GO ON.
2008 400 4x4 Euro Illustrated Parts Manual MODEL NUMBER A2008IDG4BEUR (RED) MODEL NUMBER A2008IDG4BEUG (GREEN) MODEL NUMBER A2008IDG4BEUZ (CAT GREEN) MORE TO GO ON. TM TABLE OF CONTENTS 2008 ATV 400 4x4
More informationGENTRY RESTORATIONS LTD Physical Stock Worksheet 20 June 2017
Gentry Restorations Parts Price List - 22/11/2018 Terms and Conditions - Please Read Carefully All part numbers, descriptions and pricing of products were believed to be correct at the time this document
More information1000 Mud Pro Model Number A2013MLW1PUSN Model Number A2013MLW1POSN - International SHARE OUR PASSION.
2013 1000 Mud Pro Model Number A2013MLW1PUSN Model Number A2013MLW1POSN - International TM SHARE OUR PASSION. TABLE OF CONTENTS 2013 ATV 1000 Mud Pro (Model No. A2013MLW1PUSN) (Model No. A2013MLW1POSN
More information550 TRV EFT Model Number A2013TBO4EETP SHARE OUR PASSION.
2013 550 TRV EFT Model Number A2013TBO4EETP TM SHARE OUR PASSION. TABLE OF CONTENTS 2013 550 TRV EFT (Model No. A2013TBO4EETP) FRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES... 1 REAR BODY PANEL, FOOTWELL,
More informationIllustrated Parts Manual
1 10 Illustrated Parts Manual 2 425 CR EFT Model Number A2011IRK4CETR (Red) S H A R E O U R PA S S IO N. TM TABLE OF CONTENTS 2011 ATV 425 CR EFT Red (A2011IRK4CETR) FRONT RACK, BODY PANEL, AND HEADLIGHT
More informationIllustrated Parts Manual
Illustrated Parts Manual 2 1 10 550 PS EFT Model Number A2011IBO1PETS (Metallic Gray) S H A R E O U R PAS S IO N. TM TABLE OF CONTENTS 2011 ATV 550 PS EFT Metallic Gray (A2011IBO1PETS) FRONT RACK, BODY
More informationTorque settings Torque settings. Frame torque settings. Note
3 - Torque settings Frame torque settings Part Thread (mm) Nm ±10% Tolerance Side stand Stand sensor screw M6x1 5 LOCK 2 Stand plate fixing screw M10x1.5 43 LOCK 2 Side stand fastening pin M8x1.25 Side
More informationJTC-1115 BMW BUSH REMOVER / INSTALLER
JTC-1011 CRANKSHAFT PULLY HOLDER JTC-1115 BMW BUSH REMOVER / INSTALLER JTC-1123 IGNITION LOCK REMOVER For removal and replacement of the crankshaft bolt, M112 and M113, as found on E320, E430, etc. Applicable:
More informationTorque Specifications for 2003 Hyundai Tiburon (GK) 2.7L DOHC
Torque Specifications for 2003 Hyundai Tiburon (GK) 2.7L DOHC Engine Mechanical System Camshaft sprocket bolt 90 ~ 110 900 ~ 1,100 65 ~ 80 Cylinder head cover bolt 8 ~ 10 80 ~ 100 5.8 ~ 7.2 Main bearing
More informationSpare parts catalogue SPORT 1000 SPORTCLASSIC
Spare parts catalogue SPORT 000 SPORTCLASSIC SPORT 000 M.Y. '07 Spare Parts Department P.N. 95252C Ottobre - October '06 Edizione - Edition 00 SPORT 000 M.Y. '07 Spare Parts Department P.N. 95252C Ottobre
More informationPULLERS GD_PG_$KT-K10-$KP-ABZI-$PG-UMABZ :31:24
PULLERS INTERNAL EXTRACTORS Precision internal extractor Slide hammer Suitable for small ball bearings Ideal for limited access areas Centering shaft For the accurate fitting of bearings and bushes 660.0501
More informationSealing flanges and flywheel/drive plate, removing and installing
Page 1 of 20 13-47 Sealing flanges and flywheel/drive plate, removing and installing Note: For repairs to the clutch: Repair Manual, 5 Spd. Manual Transmission 012/01W Front Wheel Drive, Repair Group 30
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 680GC Petrol Concrete Saw Serial numbers starting with 967 & 977 Effective January 1, 2011 TABLE OF CONTENTS 680GC Petrol Concrete Saw ITEM DESCRIPTION KEY PAGE
More informationSpare parts catalogue SPORT 1000 U.S.A. SPORTCLASSIC
Spare parts catalogue SPORT 000 U.S.A. SPORTCLASSIC GENERAL INFORMATION The present spare parts order exactly the right spare parts When ordering specify: ) the part's code number followed by its description;
More informationWORKSHOP MANUAL TECHNICAL NETWORK LEADERSHIP WORKSHOP MANUAL 125 CC/150 CC 4-STROKE ENGINE
WORKSHOP MANUAL TECHNICAL NETWORK LEADERSHIP WORKSHOP MANUAL - 5 CC/50 CC 4-STROKE ENGINE Workshop manual Technical network leadership TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS... CHARACTERISTICS...
More informationDVX 300 Euro. Model Number A2012KSF2BEUK SHARE OUR PASSION.
ATV 2012ATV Illustrated Parts Manual DVX 300 Euro Model Number A2012KSF2BEUK TM SHARE OUR PASSION. TABLE OF CONTENTS 2012 ATV DVX 300 Euro (Model No. A2012KSF2BEUK) BODY PANEL AND HEADLIGHT ASSEMBLY...
More informationHexhead Torque Values
Contents: 11: Engine 12: Engine Electrical 13: Fuel Preparation 16: Fuel Supply 17: Cooling 18: Exhaust 21: Clutch 23: Gearbox 31: Front Axle, Front Wheel Steering 32: Steering 33: Rear axle, rear-wheel
More informationFront suspension - Plus suspension, servicing. Volkswagen Passat B4 - Front suspension - Plus suspension, servicing
Volkswagen Passat B4 - Front suspension - Plus suspension, servicing Page 1 / 22 40-2 Front suspension - Plus suspension, servicing I - Subframe, anti-roll bar, control arm (Plus suspension), removing
More informationParts Description 2 1/2 Ton Multi-Fuel Part Number NSN
Parts Description 2 1/2 Ton Multi-Fuel Part Number NSN Filter, M49C Fuel Tanker 4330-00-983- CP20452-0 0998 Tube, M49C Fuel Tanker Pickup Element, Air cleaner 2940-00-804-10912373 7898 Cable, Engine Stop
More informationETON America PARTS CATALOG. Matrix R4-150
ETON America PARTS CATALOG w.getitparts.com Matrix R4-50 www.getitparts.com Parts and drawing are subject to change without notice. ETON America reserves the right to substitute parts that have engineering
More informationIllustrated Parts List to
Illustrated Parts List Model Series TYPE NUMBERS 0111 through 0199, 0200 through 0213, 0300 through 0353, 1345,1353, 2035 through 2073, 2135 through 2174, 4001 through 4090, 5001, 5005, 5006, 5035 through
More informationATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY
2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY 2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 2 of 58 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description
More information700 Diesel EFT Model Number A2013TBT4DETG SHARE OUR PASSION.
2013 700 Diesel EFT Model Number A2013TBT4DETG SHARE OUR PASSION. TM TABLE OF CONTENTS 2013 ATV 700 Diesel EFT Green (Model No. A2013TBT4DETG) FRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES... 1 REAR
More informationGenerator, removing and
Page 1 of 14 27-26 Generator, removing and installing CAUTION! Disconnect the battery Ground (GND) strap before working on the electrical system. Notes: Before disconnecting the battery, determine the
More informationGTS150. Dune Buggy MINIMUM RECOMMENDED OPERATOR AGE: FOR OFF-ROAD USE ONLY. 10th letter in VIN: D-G
0-06 GTS50 0th letter in VIN: D-G Dune Buggy MINIMUM RECOMMENDED OPERATOR AGE: 6 FOR OFF-ROAD USE ONLY This vehicle is designed and manufactured for off-road use only. USA only: It does not conform to
More information400 2x4/4x4 EFT SHARE OUR PASSION ṬM
SHARE OUR PASSION ṬM 400 2x4/4x4 EFT Model Number A2009IDG2BETR (Red - 2x4) Model Number A2009IDG2BETZ (Cat Green - 2x4) Model Number A2009IDG4BETR (Red - 4x4) Model Number A2009IDG4BETG (Green - 4x4)
More informationCYLINDER. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER 1 J38-11102-00-00 CYLINDER HEAD ASSEMBLY. 1 2 J38-11133-09-00. GUIDE, INTAKE VALVE..... 2 3 99510-12016-00 PIN, DOWEL.............. 2 4 95811-08070-00 BOLT, FLANGE............ 3 5 95811-08045-00
More informationPrinted from MediaCat
Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1117 020 2106 1 Crankcase 2-9 2 9022 341 1050 4 Spline screw IS-M5x25 3 0000 988 5211
More information