Tools for A, B, BV in-line pumps

Transcription

1 MarbedBook20 Tools for A, B, BV in-line pumps Tools for A, B, BV in-line pumps Pumps equipment

2 Tools for A, B, BV in-line pumps Pumps equipment TOOLS FOR A, B, BV IN LINE PUMPS Pump service brackets Comparator Bearing Boxes Delivery start tools Wrenches for feeding hand primer Pumps A tools Pumps B tools Other tools for BOSCH A, B, BV pumps Tools for tappets on A, B, BV pumps Measuring tools for A, B, BV pumps Tools for regulators RQV-RSV

3 K Bracket kit and vice for BOSCH P pumps Bracket kit and vice for BOSCH P pumps consisting of: 9356-K Strengthened base 9260 BH Swivel Tilting The pump can be positioned comfortably by the base mm extended rod with Ø 28 and 0 mm guide 9452-A BH Couple of brackets 9267-U BH Replaces 960 Replaces 9266 Replaces KDEP U is designed to accommodate various types of pumps which may differ in form and attacks. 2.R0-3

4 9356-K - BRACKET KIT AND VICE FOR BOSCH P PUMPS - OPTIONAL Optional 80 mm extended rod with Ø 28 and 0 mm guide 9452-B A Swivel vice flange with rotary movement for PES...A, VA-VE, CAV, M pumps equipped with 9600 (A) - Plate with square seat for bench vice 9402 Swivel vice flange for EP/VA...VE 9205 Swivel vice for B - BV pumps 9356 KDEP 299 BH Swivel vice cradle for operative flange (all the applicable flanges are listed in AB - test bench equipment section) 960 KDEP 2963 BH R0-4

5 988-K 988-K - COMPARATOR SUPPORT BOX FOR IN LINE PUMPS Box complete with universal comparator support to take dimension of rod stroke on pumps in line BOSCH P, P700, 8500, A, B, BV, MW, M, RSF and so on 988-K B 988-A Pieces Equalizer comparator bearing Comparator bearing A, B, BV pumps Decimal comparator Magnet Comparator bearing BOSCH P pumps Comparator bearing BOSCH M-RSF pumps 2.R0-5

6 988-K - COMPARATOR SUPPORT BOX FOR IN LINE PUMPS 20 x,5 24 x,5 8 x,5 Equalizer universal comparator bearing with return spring for rod share BOSCH P, P700, 8500 pumps reductions: 8 x,5 (B, BV pumps) 24 x,5 20 x,5 (A pumps) 24 x,5 24 x,5 (P pumps) 24 x,5 (8500 pumps) 20 x, x,5 8 x,5 Comparator bearing to survey the rod stroke for A, B, BV pumps 9446 Not included in 988-K box 9500 Decimal comparator for rack rod stroke 30 mm stroke BH Magnet 9502-B A A 9502 Comparator bearing for rod stroke BH for BOSCH P outside thread 24 x,5 clamp with rods (our art 9502-A) included B 9502-C Reduction for 9502 for BOSCH 8500 pump threaded 24 x,5 inside B C C 9483-K9 Reduction for 9502 for BOSCH MW pump thread 26 x,5 outside D D Rod (Not available separately) Comparator bearing to survey the rod share BOSCH M, RSF, 4 and 5 cyl. (MERCEDES, FORD TRANSIT) 988-A 2.R0-6

7 COMPARATOR BEARING BOX BOSCH PUMPS Dial gauge bearing tool box to survey the delivery start on rotary and in line BOSCH pumps R0-7

8 Comparator Bearing Box A A 986-B D3 2-E2 3-E2 4-C 5-D Pieces Comparator Comparator Reduction Magnet Comparator bearing Comparator bearing Comparator bearing Comparator bearing Comparator bearing Comparator bearing Probe Probe Probe Probe Probe 2.R0-8

9 COMPARATOR BEARING BOX FOR BOSCH PUMPS Centesimal comparator 5mm 9733 Centesimal comparator 0mm 9087 BH mm. 2,5 mm. 3 Comparator reduction from 3 mm to 2,5 mm 976-A5 Magnet for comparator thread 2, x Comparator bearing BOSCH EP/VA...B pumps thread 2x with probe 25 mm Ø 2 thread 2,5 (our ref.5-d4) 986 KDEP 2940 BH ,5 x 2 Comparator bearing BOSCH EP/VA...B pumps thread 3,5x2 986-A 2,5 x Comparator bearing BOSCH EP/VA...B pumps thread 2,5x 986-B KDEP 002 BH x Comparator bearing BOSCH EP/VE pumps with probes: 40 mm Ø 4 thread 2,5 (our ref.3-e) 58 mm Ø 4 thread 2,5 (our ref.2-e) KDEP R0-9

10 COMPARATOR BEARING BOX FOR BOSCH PUMPS 8 x Comparator bearing for BOSCH EP/VE pumps with probe 94 mm Ø 4 thread 2,5 (our ref.5-d2) x,5 2 x,5 Dial gauge bearing with a spill point pipe and an extended rod with returning action right for A, B, BV and in-line BH pumps 2 x,5-4 x, probe 52 mm Ø 2 thread 2,5 5-D3 probe 40 mm Ø 4 thread 3 2-E2 probe 58 mm Ø 4 thread 3 3-E2 Combination of two probes: our ref.4-c - 9 mm Ø 4 thread 2,5 our ref.4-c2-9 mm Ø 4 thread 3 4-C Couple of probes 94 mm Ø 2 thread 2,5 5-D 2.R0-0

11 970-K 970-K - COMPARATOR SUPPORT BOX FOR BOSCH P PUMPS Universal comparator supports box for delivery start on test bench and check for BOSCH P injection pumps setting on engine 970-K MW 9445-A 974-K 9682 Pieces Centesimal comparator Reduction for 974-K on BOSCH MW pumps Tool to take the delivery start with overflow Comparator support BOSCH P700 e P8500 pumps Universal on line pumps comparator support 2.R0 -

12 970-K - COMPARATOR SUPPORT BOX FOR BOSCH P PUMPS Centesimal comparator 0 mm stroke 9087 BH Comparator support to take the delivery start on all BOSCH P, P700, P8500 type R pumps and to set injection pumps on the engine. Universal tool, quick and precise, for timing pumps on trucks such as IVECO, MERCEDES, MAN, VOLVO, SCANIA and so on 974-K Reduction to be mounted on 974-K for taking the delivery start dimension on BOSCH MW pumps for IVECO EUROTEC, MERCEDES 250 TD and so on 974-MW Tool equipped with capillary hole-drilled glass to take delivery start with overflow thread 2 x,5-4 x,5 Trucks IVECO, MERCEDES etc A 2 x,5 4 x,,5 Universal comparator support to take the delivery start dimension on pumps in line: A, B, BV, SIMMS, PES...M, PES...RSF, BOSCH. thread 2 x,5-4 x,5 For its use both the needle and the spring of the valve must be removed. Then the pressure connector must be removed R0-2

13 Delivery start tools X,5 2 X,5 Tool equipped with capillary hole-drilled glass to take the delivery start dimension with exhaust valve. It enables clearly to see the overflow. Thread 2 x,5-4 x,5 2 X, X,5 Reduction union 4/2 4 X, X,5 Reduction union 2/4 for test bench 4 X, A 4 X,5 Union 4/4 for test bench A 948-A B bar manometer with quick connection 2x,5-4x,5 C A B C 948-H B Manometer BAR Ø00 mm Gas Pitch /2" Manometer reduction gas pitch /2'' - 4x,5 mm Quick connection 2 x,5-4 x,5 Manometer pipe with reduction X,5 Fixture to survey delivery start. Equipped with glass pipe with capillary hole. Thread 8 x, R0-3 Nylon dial gauge bearing to survey the end stroke of the engine FIAT IVECO trucks 955

14 9883-A BH EFEP 435B DUAL PURPOSE DELIVERY START It is suitable determining the delivery start of pumps. Pressure is taken throught pumping, by connecting the pipe-added to the delivery valve of the pump without removing the pump PORTABLE INJECTOR TESTER It can be used as a portable pump for testing injectors. It is equipped with manometer 35 BAR. It has got pumping element and valve, connecting pipe, additional tank. All is packed in a case with handle 2.R0-4

15 Wrenches for feeding hand primer B A Wrenchfor feeding hand primer 9m 9075 A B Rod with /2'' square Wrench 9 mm To be used with our art 9322 /2'' square wrenches 7 mm mm mm mm mm mm 9325-A 2.R0-5

16 004-A 004-A - TOOL PANEL FOR BOSCH A PUMPS 004-A 9068-A A 6 Pieces Two wrenches Tappet lifter Pumping plier Fork Governor wrench Governor wrench Puller Comparator bearing Wrench 2.R0-6

17 004-A - TOOL PANEL FOR BOSCH A PUMPS 0 Two wrenches (flat and shaped) to adjust the tappet nuts size A & B 7-4 mm Strenghtened tappet lift fork size A (6 pieces in panel) 9068-A KDEP 2922 BH Plier size A for pumping elements 943 KDEP 295 BH Aluminium fork for BOSCH A pumps 9358 KDEP 294 BH Ø 8 4 EPRSV governor wrench 9707 KDEP 2998 BH Ø 6 22 EP/RSUV governor wrench 9709 KDEP 2968 BH Mass holder puller for RQV...A... adjustment 20 x, KDEP 2886 BH x,5 8 x,5 Comparator bearing to survey the rod stroke for A, B, BV pumps 9446 Torque convertor fixing wrench for BOSCH B/BV and P 0 and 2 mm slide 9327-A KDEP 2906 BH R0-7

18 004-B 004-B - TOOL PANEL FOR BOSCH B PUMPS 004-B 9068-A A 6 Two wrenches Tappet lifter Pumping plier Fork Governor wrench Governor wrench Toothed wrench Spring press 9327 Wrench 909 Pieces Puller 2.R0-8

19 004-B - TOOL PANEL FOR BOSCH B PUMPS Two wrenches (flat and shaped) to adjust the tappet nuts size B & A 4-7 mm Tappet lift fork size B strenghtened (6 pieces in panel) 9068-A KDEP 2922 BH Pumping plier size B 942 KDEP 2943 BH Aluminium fork for BOSCH B pumps Ø 22 6 RQV...B... governor wrench 9705 KDEP 2969 BH Ø 4 0 Diesel oil adjusting wrench hexagon plus screwdriver Two teeth wrench to adjust the governor springs Governor spring press 957-A KDEP 2894 BH Ø 2 6 Torque convertor fixing wrench for FIAT Mass holder puller for RQV...B... adjustment 24 x,5 909 KDEP 2872 BH R0-9

20 Other tools for BOSCH A, B, BV pumps Internal ring puller for spheric bearings A, B pumps 92 Ø 60 Puller bearings for internal rings, couplings etc... right opening 60 mm 9048 A Ø 36 B Ø 28 Ø 29 A B Expander size A - Ø 36 Expander size B - Ø 28 Universal puller with flask and 2 expander for bearing external ring A, B, BV pumps etc.. Bearing external rings puller A pumps pliers Ø A Ø 36 Bearing external rings puller B, BV pumps supplied with 2 expanders 909 B Ø 38 A B Expander size A - Ø 36 Expander size B - Ø 28 Cradle puller for conical roller bearings for P pumps with Ø 30 shaft 907-A Cradle puller for conical roller bearings for B pumps with Ø 20 shaft 906 Cradle puller for conical roller bearings for A pumps with Ø 7 shaft 905 Cradle puller for conical roller bearings for BV, P pumps with Ø 25 shaft R0-20

21 OTHER TOOLS FOR BOSCH A, B, BV PUMPS Extendable handle to carry B and P size pumps 9498 Rack rod stop clamp for A, B pumps 944 Pumping base miller size B - Ø 7x4 Pumping base miller size A - Ø 8x4 927 KDEP 2953 BH KDEP 2955 BH Pumping base miller size A - Ø 8x4 928-A KDEP 295 BH x,5 Ø 22 8 Pumping base miller size BV - Ø 22x8 Reduction for 929 Ø 26x,5 929 KDEP Pinion wrench for the rotation of the governor gear of DISA pump Teeth wrench for mass holder nut of DISA pump Ø 9 DISA rotary group puller 95 Teeth wrench for rod track for DISA pump 96 Ø 6 2.R0-2 3

22 Tools for tappet A, B, BV pumps Tappet caps striker size A e B (it includes our arts and 9543) 9407 Spare for striker size B 9542 Spare for striker size A 9543 Spare for striker for socket cap size B Spare for striker for socket cap size A Wrench for tappet cap size B Wrench for tappet cap size A Bush for tappet cap size A Bush for tappet cap size B 9064 KDEP 2949 BH KDEP 2973 BH Standard tappet press with head for nylon roller BOSCH PE...B and P pumps 9440 Aluminium fork with strenghtened springs for BV and P pumps R0-22

23 h.4 Lever fork for tappet lifter size A Lever fork for tappet lifter size B 965 KDEP 292 BH KDEP 2896 BH h.9 Toothed wrench for inspection cap (between adj. and casing) for A pumps Toothed wrench for inspection cap (between adj. and casing) for B pumps Diesel oil adjusting extended wrench hexagon plus screwdriver Diesel oil adjusting wrench hexagon plus screwdriver Diesel oil adjusting wrench hexagon 3 plus hexagon A 4 7 Diesel oil adjusting wrench hexagon 4 plus hexagon Ø Diesel oil adjusting wrench two teeth plus screwdriver 99 Ø Diesel oil adjusting wrench two teeth plus hexagon 9mm box wrench for feeding pump union pipes R0-23

24 Measuring tools for A, B, BV pumps 968 Delivery start comparator bearing for A, B, BV pumps to apply to the tappet cap flange BH x,5 4x5,5 4 x,5 26 x,5 Comparator bearing with a spill point pipe and extended rod with returning action for A, B, BV pumps x,5 24 x,5 Comparator bearing for BV pumps 26x,5 with 2 rods: our art 3-E - 58 mm, Ø 4, thread 2,5 our art 5-D3-52 mm, Ø 2, thread 2, x,5 4 x,5 Comparator bearing for BV pumps 24x,5 with 2 rods: our art 3-E - 58 mm, Ø 4, thread 2,5 our art 5-D3-52 mm, Ø 2, thread 2, Comparator bearing for A, B, BV pumps 2x,5-4x,5 with 2 rods: our art 3-E - 58 mm, Ø 4, thread 2,5 our art 5-D3-52 mm, Ø 2, thread 2, Jig to measure the bearings float on Ø 20 shaft BH KDEP Jig to measure the bearings float on Ø 25 and Ø 30 shaft BH KDEP 2967 KDEP Jig to measure the bearings float on Ø 35 shaft KDEP R0-24

25 004-QS 004-QS - TOOL PANEL FOR BOSCH RQV-RSV REGULATORS Complete tool panel for RQV-RSV regulators consisting of 25 arts 004-QS 2.R0-25

26 004-QS Tools for RQV-RSV regualtors K A Pieces Puller Puller Puller Reduction Adjusting wrench Bush Adjusting wrench Adjusting wrench Adjusting wrench Adjusting wrench Screwdriver Pressing tool Adjusting wrench Adjusting wrench LDA adjusting tool Adjusting wrench Adjusting wrench Adjusting wrench Wrench Adjusting wrench Adjusting wrench Stroke stop Spring press Adjusting wrench Puller 2.R0-26

27 004-QS - TOOL PANEL FOR BOSCH RQV-RSV REGULATORS Mass holder puller for RQV...A... adjustment 20 x, KDEP 2886 Mass holder puller for RQV...B... adjustment 24 x,5 909 KDEP 2872 Puller 3 threads: M 36 x,5 - M 26 x,5 - M 20 x,5 Dynamometric wrench reduction /2'' double square 929 KDEP 298 BH KDEP 292 BH Ø 6 22 EP/RSUV governor wrench 9709 KDEP Bush for tappet cap - size A 9065 KDEP 2973 BH EPSD governor wrench 9708 KDEP 2979 BH RQV..A governor wrench 9706 KDEP 2988 BH Ø EPRSV governor wrench 9707 KDEP 2998 BH Adjusting wrench - FIAT 90 hex KDEP 047 BH Adjusting wrench hex. 0 + allen wrench KDEP 048 BH Tool to press plastic seal on lock nuts 838 KDEP 88 BH Governor wrench hexagon plus hexagon 9875-K KDEP 54 BH R0-27

28 004-QS - TOOL PANEL FOR BOSCH RQV-RSV REGULATORS Disassembly wrench for two teeth membrane + screwdriver 9847 KDEP 542 BH Tool for the LDA (last type) central pin positioning (e.g. MERCEDES 9.44) To be used with our art KDEP 544 BH Adjusting wrench hex. 3 + allen wrench 4 97 RQV...B... governor wrench 9705 KDEP 2969 BH KDEP 2989 BH Adjusting wrench for trucks MERCEDES P700 pumps hex 27-2 teeth Ø 6,2 teeth Ø 2 - allen wrench 4 mm KDEP 578 BH teeth wrench for regular spring plate, K type KDEP 634 BH LDA adjusting wrench on CAV DPS Turbo CAV PES...RSF stroke stop (MERCEDES 90 D-250 D) KDEP 077 BH Governor spring press 957-A KDEP 2894 BH Balancing wrenches of rotary groups with regulator initial thread - 8 x, Motoring hub puller SCANIA 42 - mm 42 x,5 KDEP 2926 BH R0-28

29 Other tools for regulators Goniometer 80, is used to check the angle shot of the control lever of the governor RQV-K 95-A BH ex. BH EFEP 56 C Ø RQV...B...A standard wrench for mass holder nut 959 Ø 26 4 RQV...A guided wrench for mass holder nut 960 Ø 23 4 RQV...B governor wrench for mass holder nut 96-A Ø 26 2 Guided wrench to adjust the governor spring 996 Ø 4 Spring press The sliding takes place on bearings thanks to a pressure without stress Ø 23 Wrench for mass holder nut size A, B, BV with pressure guide for autocentering RQV...B...A... governor 948 Ø 23 4 Two teeth wrench for FRIEDMAN MAYER governor nut 9338 Ø 20 2.R0-29 6

30 OTHER TOOLS FOR REGULATORS Fixed checking gauge to survey the protrusion dimension of the elastic pins, RQV govenor 9624 BH Fixed checking gauge to survey the protrusion dimension of the elastic pins, RQV...K govenor 9624-A BH Puller for governor bell EP/RSV EPRSV governor wrench 997 Ø 7 Balancing wrench for rotary groups without regulator depth thread 8x, Balancing wrench for rotary groups with regulator initial thread 8x, Regulator spring-presser tool. It enables an easy massbalancing with our wrench A Conical reamer for governor shaft pin Ø 3mm 9887 Reamer for governor HUB mass holder 9888 Puller / connector kit for oil seal of the accelerator shaft RQ governor R0-30

31 MARBED BOOK MARBED S.r.l. - Italy This catalog is, to all intents, protected by copyright, so the reproduction in part or in full of photos, drawings, etc.. is prohibited. Original part numbers listed in this catalog are given for reference. The data and information, shown in this technical catalog, replace the previous edition that is now obsolete. All specifications, dimensions, weights in this catalog are subject to change without notice. The illustrations are not binding. MARBED Srl - Piazza Novelli, Milano - Italy Tel Fax info@marbed.com