WPP 15 T - Hydraulic table shop press with manual pump and mobile cylinder for professional use

Transcription

1 Hydraulic shop presses WPP 15 T - Hydraulic table shop press with manual pump and mobile cylinder for professional use For all repair and assembly works, e.g.: Straightening Robust frame with perforation to adjust the working table Reliable particularly precise hydraulic made in Pressure generation manual by actuating the pump lever With automatic return of the piston With chrome-plated cylinder piston With safety valve to protect the system the system against overload Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates WPP 15 T! To machine flats, to press in bearings, bolts or similar materials imperatively use the optional perforated plate for WPP 15 T, Type WPP 15 T Power Max. load prism jaw Weight 15 t 3.5 t 105 kg 6-piece pressure mandrel kit with perforated plate, Ø 29, 24, 18, 14, 10, 5 mm Dimensions piece pressure mandrel kit with perforated plate for WPP 15 T Perforated plate for WPP 15 T

2 WPP - Hydraulic shop presses with mobile cylinder and manual pump for professional use For all repair and assembly works, e.g.: straightening Robust frame with perforation to adjust the working table Reliable particularly precise hydraulic made in With chrome-plated cylinder piston With automatic return of the piston with safety valve to protect the system against overload Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates WPP 30 additionally equipped with hoist to lift and lower the working table Magnetic drilling Cutting Metal grinding Trimming retrofitting kit Foot pedal for pump Notching & Punching WPP 15 Fig. with optional foot pedal WPP 30 Equipped with a winch to lift and lower the workbench Bending! To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates. Presses Type WPP 15 WPP 20 WPP Power 15 t 20 t 30 t Max. load prism jaw 3,5 t 5 t 7,5 t Weight 120 kg 140 kg 230 kg 6-piece pressure mandrel kit with perforated plate, Ø 29, 24, 18, 14, 10, 5 mm Circular saws Dimensions in mm WPP 15 WPP 20 WPP piece pressure mandrel kit with perforated plate for WPP for WPP for WPP Perforated plate for WPP 15 and WPP Perforated plate for WPP Retrofitting kit foot pedal for pump without assembly for WPP 15 and WPP Roller conveyors Band saws

3 Hydraulic shop presses WPP BK - Medium-weight hydraulic shop presses with mobile cylinder, with manual and foot pump for professional use For all repair and assembly works, e.g.: straightening Robust frame with perforation to adjust the working table Reliable particularly precise hydraulic made in Pressure build-up by hand and foot control of the pump lever Due to manually operated foot pump, both hands are free to fix the workpiece With mobile cylinder piston With automatic return of the piston With safety valve to protect the system the system against overload Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates WPP 20 BK! To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates. WPP 50 BK Equipped with a winch to lift and lower the workbench Type WPP 20 BK WPP 30 BK WPP 50 BK Power 20 t 30 t 50 t Max. load prism jaw 5 t 7.5 t 12,5 t Weight 210 kg 280 kg 360 kg 6-piece pressure mandrel kit with perforated plate, Ø 29, 24, 18, 14, 10, 5 mm Dimensions WPP 20 BK WPP 30 BK WPP 50 BK piece pressure mandrel kit with perforated plate for WPP 20 BK for WPP 30 BK for WPP 50 BK Perforated plate for WPP 20 BK Perforated plate for WPP 30 BK Perforated plate for WPP 50 BK

4 WPP 50 M - Hydraulic shop presses with electrical pump and double-acting cylinder for professional use For all repair and assembly works, e.g.: straightening robust frame with punch hole for the height adjustment of the press table Automatic switch-over from accelerated idle speed to slow working speed of the cylinder Reliable particularly precise hydraulic made in With safety valve to protect the system the system against overload With a winch to lift and lower the workbench Pressure power readable on the manometer Magnetic drilling Trimming Equipped with doubleacting cylinder Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates Bending Metal grinding Cutting Notching & Punching WPP 50 M Presses Type WPP 50 M Power 50 t Max. load prism jaw 12.5 t Slow feed 1.7 mm/sec. Rapid feed 20 mm/sec. Motor power 1.5 kw Power connection 50 Hz Weight 420 kg 6-piece pressure mandrel kit with perforated plate for WPP 50 M Perforated plate for WPP 50 M Optional 6-piece pressure mandrel kit Ø 29, 24, 18, 14, 10, 5 mm Dimensions F - Height passage min. I - Width of the pump WPP 50 M Circular saws Roller conveyors 145 Band saws

5 Hydraulic shop presses WPP - Heavy-type, hydraulic professional shop presses equipped with mobile cylinder and two piston feed speeds Appropriate for assembly and straightening works as well as for workpiece inspections or to press in or press out bearings and other components Perfect for technical shops, repair shops and technical training facilities Heavy machine frame welded from steel profiles to absorb the incidental compressive force of the cylinder With two piston feed rates and pressure regulation The hydraulic system is working quite precisely in the electrical mode as well as in the manual mode Easy hight adjustment of the heavy working table without effort with the help of the hydraulic cylinder WPP 60 WPP 100 D 0 Type D 0 with a passage width of 0 mm WPP WPP WPP 100 D WPP WPP D WPP Piston stroke mm Power Press speed Feed speed Motor power Power connection 50 Hz Weight 60 t 2.1 mm/s 8.7 mm/s 1.5 kw 540 kg 100 t 2.5 mm/s 2.2 kw 970 kg 100 t 2.5 mm/s 2.2 kw 1145 kg 400 t 2.4 mm/s 3.0 kw 1195 kg 400 t 2.4 mm/s 3.0 kw 1430 kg t 1.8 mm/s 5.7 mm/s 3.0 kw 1690 kg 146

6 With motor-driven piston return Piston with unscrewable bottom Pressure manometer integrated into the frame D 0 series with large passage width of 0 mm Magnetic drilling Chain for table height adjustment fixed on the cylinder via stable flange Trimming Manometer integrated into the frame Metal grinding Cylinder adjustment by means of the handle Easy table height adjustment with the help of the hydraulic cylinder and mounting bolts. Cutting Comfortable and clearly arranged operation of the hydraulic unit WPP Presses Notching & Punching Bending Prism block kit* for WPP Prism block kit* for WPP Prism block kit* for WPP Dimensions WPP 60 mm 2120 mm mm 695 mm mm 260 F - Width with pump mm 1315 G - Distance between bolts mm H - Height passage min. mm 197 I - Height adjustment working table mm J- Width working table mm 805 WPP WPP 100 D * Kit including 2 prism blocks WPP 60 loadable with 30 tons per block WPP 100 loadable with 50 tons per block WPP loadable with 80 tons per block WPP WPP D WPP Stable frame structure with flat construction at the same time Circular saws Roller conveyors 147 Band saws

7 THREADED BUSHINGS with the process Threading bushings which are no longer loose! No more getting loose or turning Saves annoying drilling and avoids claims Easy assembly On almost any OPTIMUM drill press Only 2 working steps Germany 1 Flow drill 2 Thread shaper Safe connection You need 1 When flow drilling a twist-secured bushing is formed of the existing material without chips by friction heat and then this bushing is threaded. Flow drill 2 Thread shaper Basic kit Suitable for steel, stainless steel, aluminium and non-ferrous metal Made of hard metal with polygon cut Precise for threads with gauge For standard fixtures The basic equipment includes all you need in order to be able to immediately work with the THERMDRILL Type "form" Type "cut" Thread shaper Basic kit With collar Without collar With TiN coating and oil grooves 6HX, shape C for MT 2 and MT 3 Size M M M M M M x hook wrench and open-end wrench 4 x collets Ø 6/8/10/12 mm Reducing bush MT3-MT2 Lubricant Tool holder MT 3 Tool kits = Thermdrill + thread former Type "form" Type "cut" Size M M M M M M Recommended material thickness and speeds types Lubricant Paste for flow drilling (1 kg) including brush Thread moulder oil (1 litre) including brush Max. recommended material thickness [mm] for version "short" M 4 M 5 M 6 M 8 M 10 M 12 short long "form" "cut" For material which is thicker than indicated chose the Thermdrill version "long". For item No "S" replace by "L" 148 User video