WPP 15 T - Hydraulic table shop press with manual pump and mobile piston for professional use

Size: px
Start display at page:

Download "WPP 15 T - Hydraulic table shop press with manual pump and mobile piston for professional use"

Transcription

1 Presses

2 Hydraulic shop presses WPP 15 T - Hydraulic table shop press with manual pump and mobile piston for professional use For all repair and assembly works, e.g.: Straightening of axes, carriers, shafts, etc.; pressing and pressing in of bearings, bolts and bushings; pressing and squeezing works; load tests and welding tests and more Solid welding construction Robust frame with perforation to adjust the stamping machine table Reliable particularly precise hydraulic made in Pressure generation manual by actuating the pump lever With automatic return of the piston With chrome-plated cylinder piston Pressure power readable on the manometer With overload protection valve Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperativela use optional perforated plates WPP 15 T! To machine flats, to press in bearings, bolts or similar materials imperatively use the optional perforated plate for WPP 15 T, Type WPP 15 T : 1115 plus VAT Power Max. load prism jaw Weight 15 t 3.5 t 105 kg 6-piece pressure mandrel kit with perforated plate, Ø 29, 24, 18, 14, 10, 5 mm Dimensions Accessories 6-piece pressure mandrel kit with perforated plate for WPP 15 T Perforated plate for WPP 15 T plus VAT Built according to CE directives

3 Presses WPP - Hydraulic column shop presses with with mobile piston and manual pump for professional use For all repair and assembly works, e.g.: Straightening of axes, carriers, shafts, etc.; pressing and pressing in of bearings, bolts and bushings; pressing and squeezing works; load tests and welding tests and more Solid welding construction Robust frame with perforation to adjust the stamping machine table Reliable particularly precise hydraulic made in With firm chrome-plated cylinder piston Pressure power readable on the manometer With automatic return of the piston With overload protection valve Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates WPP 30 additionally equipped with hoist to lift and lower the workbench Accessories retrofitting kit foot pedal for pump WPP 15 Fig. with optional foot pedal WPP 30 Equipped with a winch to lift and lower the workbench! To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates. Type WPP 15 WPP 20 WPP 30 : plus VAT ' Power 15 t 20 t 30 t Max. load prism jaw 3,5 t 5 t 7,5 t Weight 120 kg 140 kg 230 kg Transportation packaging flat rate* TPFR 1=19.00 TPFR 1=19.00 TPFR 1=19.00 *For any explanation of the transport surcharge please refer to the rear side, Price TVP plus VAT. Dimensions in mm WPP 15 WPP 20 WPP 30 Accessories piece pressure mandrel kit with perforated plate, Ø 29, 24, 18, 14, 10, 5 mm 6-piece pressure mandrel kit with perforated plate for WPP for WPP for WPP Perforated plate for WPP 15 and WPP Perforated plate for WPP Retrofitting kit foot pedal for pump without assembly for WPP 15 and WPP plus VAT Built according to CE directives 141

4 Hydraulic shop presses WPP BK - Medium-weight hydraulic column shop presses with mobile piston, with manual and foot pump for professional use For all repair and assembly works, e.g.: straightening of axes, carriers, shafts, etc.; pressing and pressing in of bearings, bolts and bushings; pressing and squeezing works; load tests and welding tests and more Solid welding construction Robust frame with perforation to adjust the table Reliable particularly precise hydraulic made in Pressure build-up by actuating the pump lever manually or by foot Due to foot-controlled hydraulic pump both hands are free in order to fix the workpiece With mobile chrome-plated cylinder piston Pressure power readable on the manometer With automatic return of the piston With overload protection valve Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates WPP 20 BK! To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates. WPP 50 BK Equipped with a winch to lift and lower the workbench Type WPP 20 BK WPP 30 BK WPP 50 BK : plus VAT 1' ' ' Power 20 t 30 t 50 t Max. load prism jaw 5 t 7.5 t 12,5 t Weight 210 kg 280 kg 360 kg Transportation packaging flat rate* TPFR 2=39.00 TPFR 2=39.00 TPFR 2=39.00 *For any explanation of the transport surcharge please refer to the rear side, Price TVP plus VAT. Dimensions WPP 20 BK WPP 30 BK WPP 50 BK ' 142 Accessories 6-piece pressure mandrel kit with perforated plate for WPP 20 BK for WPP 30 BK for WPP 50 BK Perforated plate for WPP 20 BK Perforated plate for WPP 30 BK Perforated plate for WPP 50 BK piece pressure mandrel kit with perforated plate, Ø 29, 24, 18, 14, 10, 5 mm plus VAT Built according to CE directives

5 Presses WPP 50 M - Hydraulic column shop presses with electrical pump and double-acting cylinder for professional use For all repair and assembly works, e.g.: straightening of axes, carriers, shafts, etc.; pressing and pressing in of bearings, bolts and bushings; pressing and squeezing works; load tests and welding tests and more Solid welding construction Robust frame with perforation to adjust the pressing table Pressure power readable on the manometer With automatic switch-over of increased no-load operation speed to little working speed of the piston With double-acting cylinder Reliable particularly precise hydraulic made in With overload protection valve With a winch to lift and lower the workbench Pressure power readable on the manometer Equipped with doubleacting cylinder Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates WPP 50 M Type WPP 50 M : 3050 plus VAT 3' Power 50 t Max. load prism jaw 12.5 t Slow feed 1.7 mm/sec. Rapid feed 20 mm/sec. Motor power 1.5 kw Power connection 50 Hz V Weight 420 kg Transportation packaging flat rate* TPFR 2=39.00 *For any explanation of the transport surcharge please refer to the rear side, Price TVP plus VAT. Optional 6-piece pressure mandrel kit Ø 29, 24, 18, 14, 10, 5 mm Accessories plus VAT 6-piece pressure mandrel kit with perforated plate for WPP 50 M Perforated plate for WPP 50 M Dimensions F - Height passage min. I - Width of the pump WPP 50 M Built according to CE directives 143

6 Hydraulic shop presses WPP MVZ - Heavy-type, hydraulic professional shop presses equipped with mobile piston and two piston feed rate Perfect for technical shops, repair shops and technical training facilities with two piston feed speeds and pressure regulation: the piston first rapidly moves towards the workpiece and then switches over to press speed The hydraulic system is working quite precisely in the electrical mode as well as in the manual mode The height of the heavy working table can be easily adjusted without effort by means of the hydraulic cylinder Appropriate for assembly and straightening works as well as for workpiece inspections or to press in or press out bearings and other components with motor-driven piston return Very robustly built - the stable frame is welded from best profile steel with utmost carefulness Chromed, tempered piston with bottom which can be unscrewed Including pressure manometer WPP 100 MVZ WPP 60 MVZ Type WPP 60 MVZ WPP 100 MVZ WPP 100 MVZ D 0 WPP MVZ WPP MVZ D 0 : plus VAT 5' ' ' ' ' Power 60 t 100 t 100 t t t Feed speed 9.2 mm/s 9.2 mm/s 9.2 mm/s 8.9 mm/s 8.9 mm/s Motor power 1.5 kw 2.2 kw 2.2 kw 3.0 kw 3.0 kw Power connection 50 Hz V V V V V Weight 685 kg 955 kg 1240 kg 1575 kg 2045 kg Transportation packaging flat rate* TPFR 4=79.00 TPFR 6= TPFR 6= TPFR 6= TPFR 6= *For any explanation of the transport surcharge please refer to the rear side, Price TVP plus VAT. 144 Built according to CE directives

7 Presses WPP MVZ Accessories plus VAT Prism block kit* for WPP60MVZ Prism block kit* for WPP 100MVZ Prism block kit* for WPP MVZ * Kit including 2 prism blocks WPP 60MVZ loadable with 30 tons per block WPP 100MVZ loadable with 50 tons per block WPP MVZ loadable with 80 tons per block F - Height passage min. I - Width working table WPP 60 MVZ WPP 100 MVZ WPP 100 MVZ D ' WPP MVZ WPP MVZ D Built according to CE directives 145

8 Thermdrill THERMDRILL - The threaded bushing which really holds firm The THERMDRILL process Convincing arguments: quality, efficiency and price: Tripling the material thickness Shaping without chips by frictional heat + Thread forming = Safe connection Up to three times quicker than with rivet nuts Only a fraction of the material cost Safe grip of steel sheets, round and hollow profiles, in lots of materials Highest loading capacity (e-g. 27 kn at M8 in 2 mm steel sheets) Applicable on common column or bench drills as well as in machining centers 2 mm 6 mm By means of the THERMDRILL procedure a stable threaded bushing is formed without chips from the existing material with only two working steps. Type "form" Forming a bead from the material flowing upward and thus having 1-2 threads more. Type "cut" The material flowing upward is cut off form-locking and makes a neat surface. Recommended max material thickness [mm] (short type) M 4 M 5 M 6 M 8 M 10 M 12 Type "form" Type "cut" Select the "long" version for thicker material. Our modular system 1. Tool kit 2. Collet chucks ER Basic kit Other thread sizes as well as other accessories are available upon request. The basic equipment includes all you need when working with THERMDRILL. Tool kits = Thermdrill + thread former Collet chuck 1 ER 32 Basic kit Type "form" Type "cut" Size. for Holder M } MT M MT Content: 1 collet chuck holder with air ring ER 32 1 hook wrench 1 open-end wrench 1 system box 100 ml threading oil 100 g THERMDRILL paste 1 operating instructions The individual components Thermdrill Thermdrill Thread shaper Lubricant Type "form" Type "cut" Size M Paste for Thermdrilling M (1 kg) M M M Thread forming oil ( litre) 1 Standard collet chucks are only required, if they are not yet available in the tool shop 146 M Please find further information under www. optimum-maschinen.de or in the Optimum catalogue!

WPP 15 T - Hydraulic table shop press with manual pump and mobile cylinder for professional use

WPP 15 T - Hydraulic table shop press with manual pump and mobile cylinder for professional use Hydraulic shop presses WPP 15 T - Hydraulic table shop press with manual pump and mobile cylinder for professional use For all repair and assembly works, e.g.: Straightening Robust frame with perforation

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28

More information

Hydraulic Jacks & Tools Test rig

Hydraulic Jacks & Tools Test rig ydraulic Jacks & Tools Test rig ydraulic test rig for hoisting equipment model RPYS-1215 Capacity max. 12 t or testing pul-lifts, lever hoists, chain blocks, wire rope pullers as well as other lifting

More information

HYDRAULIC JACKS & TOOLS

HYDRAULIC JACKS & TOOLS HYDRAULIC JACKS & TOOLS 323 Hydraulic jacks & tools Table of contents Page A characteristic of this force-oriented hydraulic Hydraulic cylinders, single-acting program is the operating pressure which can

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608

More information

RBM Manual, asymmetric 3-roller plate rolling machines

RBM Manual, asymmetric 3-roller plate rolling machines RBM Manual, asymmetric 3-roller plate rolling machines XXHeavy-duty and rugged cast iron design XXAsymmetric 3-roller system for convenient pre-bending XXTop roller swivels out XXRoller driven via crank

More information

Series SSG - Compressing & stretching device for the Use in the workshop and construction zone

Series SSG - Compressing & stretching device for the Use in the workshop and construction zone Compressing and stretching devices Series SSG - Compressing & stretching device for the Use in the workshop and construction zone To manufacture wheel arches, window frames, rain profiles or door edges

More information

.com More than a machine. Power your life

.com More than a machine. Power your life Mechanical Clamp, Precise working Solid Radial Drilling Machines ideal for Versatile use in the Single Part and Series Production This kind of MM-R40V is the Mechanical Clamp 40mm Solid Radial Drilling

More information

PNP 90 Rivet Tool PNP 90 XT2 Rivet Tool

PNP 90 Rivet Tool PNP 90 XT2 Rivet Tool PNP 90 Rivet Tool PNP 90 XT2 Rivet Tool Sub-Component and Mandrel Listing PNP 90, 6 Ton Capacity Blind Rivet Gun PNP 90 XT2, 10 Ton Capacity (48509, rev 0) 017-03 Car-O-Liner Group AB PNP 90 and PNP 90

More information

:45 Pagina 5 Clamping

:45 Pagina 5 Clamping Clamping Clamping Wrenches The Original Heavy-Duty Pipe Wrench Ridge Tool, the world s leading manufacturer of pipe working tools, produces today millions of pipe wrenches with types and sizes to fit every

More information

GTO Precise, universal stationary chuck for collets

GTO Precise, universal stationary chuck for collets Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest

More information

Transmission. Transmission (449) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 7.E1

Transmission. Transmission (449) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 7.E1 Transmission Transmission Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 7.E1 (449) 8-01 KL-0140-2 Meter for Coefficient of Friction PM KL-0140-2 For accurate adjustment of bearing pre-load when repairing

More information

Flexible Couplings 44

Flexible Couplings 44 Flexible Couplings 44 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg MTY (81) 83 54 10 18 Why RINGSPANN Flexible Couplings? No connection of shafts without clutches It is a well-known fact

More information

Conventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 20 D. Universal lathes with toolmaking precision for industrial applications

Conventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 20 D. Universal lathes with toolmaking precision for industrial applications Conventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 2 D Universal lathes with toolmaking precision for industrial applications EMCOMAT 14 S/14 D EMCOMAT 17S/17D/2D The Technology The EMCOMAT 14 S/14

More information

ALFRA PRESS - overview

ALFRA PRESS - overview 70 ALFRA PRESS 71 ALFRA PRESS - overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 74 Page 78 Control cabinet housing, Control cabinet doors, Mounting panels Control cabinet housing, Control cabinet doors,

More information

Workshop. Equipment. People. Passion. Performance.

Workshop. Equipment. People. Passion. Performance. Workshop Equipment People. Passion. Performance. 1901 1904 1910 1911 1912 1912 1925 1925 1939 Our History Decades of innovation First single-valve pneumatic hammer First electric tools and railway speed

More information

POWER CHUCKS CYLINDERS / STEADY RESTS

POWER CHUCKS CYLINDERS / STEADY RESTS POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive

More information

SIOUX TOOLS FORCE PRODUCT CATALOG DRILLS

SIOUX TOOLS FORCE PRODUCT CATALOG DRILLS SIOUX TOOLS FORCE PRODUCT CATALOG DRILLS Drills Index Pistol Grip................................... 9 Inline................................... 9-10 Right Angle................................ 10 Drill

More information

PERFORMANCE AND SPECIFICATION. BORING DIAMETER RANGE 1.5 to 24 BORING BAR STROKE 305, 610 or 915mm 12, 24, or 36

PERFORMANCE AND SPECIFICATION. BORING DIAMETER RANGE 1.5 to 24 BORING BAR STROKE 305, 610 or 915mm 12, 24, or 36 MLB610 Line Boring Machine Rev 1.0 Page 1 of 9 DESCRIPTION A versatile and modular line boring machine offering a choice of electric, hydraulic and pneumatic boring bar drive motors, with a mechanical

More information

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B ) Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.

More information

2. Crane standing on firm, horizontal ground.

2. Crane standing on firm, horizontal ground. The operating weight includes the basic machine with HD undercarriage, 2 main winches 200 kn including wire ropes (90 m) and 11 m main boom, consisting of A frame, pulley block, boom foot (5.5 m) and boom

More information

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT 128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel

More information

Complete systems for efficient diamond drilling

Complete systems for efficient diamond drilling Complete systems for efficient diamond drilling Power and intelligence in perfect When you measure efficiency in terms of number of holes per hour or day, it s just as much about useability and ergonomics

More information

Force Limiters 49. RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg

Force Limiters 49. RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Force Limiters 49 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Why RINGSPANN Force Limiters? Why RINGSPANN Force Limiters? There are many ways of transmitting forces and torques in machines,

More information

ROSBACK PRINTERS AND BOOKBINDER S MACHINERY Quality Bindery Equipment Since 1881

ROSBACK PRINTERS AND BOOKBINDER S MACHINERY Quality Bindery Equipment Since 1881 PRINTERS AND BOOKBINDER S MACHINERY Quality Bindery Equipment Since 1881 FIELD CONVERSION VACUUM KIT Part No. 220-A-121 (60Hz) Part No. 220-A-121-1 (50Hz) For TRUE-LINE 20" & 26" PERFORATORS MODELS 220A

More information

Pipe cutting machine. REMS Cento REMS Cento RF. for Professionals

Pipe cutting machine. REMS Cento REMS Cento RF. for Professionals Pipe cutting machine REMS Cento REMS Cento RF for Professionals 5 Patent EP 1 782 904 Super fast. Right angled. Chip-free. No outer burr. Dry cutting. 1 German Quality Product 12 3 6 4 9 13 2 14 1 11 10

More information

WESCO INDUSTRIAL PRODUCTS, INC. Folding Handle Scissors Lift Table. Part Number: &

WESCO INDUSTRIAL PRODUCTS, INC. Folding Handle Scissors Lift Table. Part Number: & WESCO INDUSTRIAL PRODUCTS, INC Part Number: 260207 & 260208 Note: Operator MUST read and understand these operating instructions before using this. TABLE OF CONTENTS General Information... 2. Description...

More information

Technical data Hydraulic crawler crane HS 835 HD

Technical data Hydraulic crawler crane HS 835 HD Technical data Hydraulic crawler crane HS 835 HD Dimensions Basic machine with undercarriage 2860 7360 3000 1700 1120 3260 990 1200 2360 4710 5650 1220 700 4300 310 R 4050 11250 Operating weight The operating

More information

[ means: Made in the Heart of Europe at a great price. Vertical turning machines VT 400, VT 250, VT 160 with integrated automation

[ means: Made in the Heart of Europe at a great price. Vertical turning machines VT 400, VT 250, VT 160 with integrated automation [ E[M]CONOMY] means: Made in the Heart of Europe at a great price. Vertical turning machines VT 4, VT 25, VT 16 with integrated automation EMCO VERTICAL VT 4 The new VT 4 for chuck parts up to 4 mm completes

More information

Flexi Press H-Model, Standard

Flexi Press H-Model, Standard Flexi Press H-Model, Standard The modern workshop press FlexiPress is our strong and reliable workshop press for all requests. All models are delivered with a generous workspace and a double-acting cylinder.

More information

PRODUCT GUIDE BROBO GROUP. brobo.com.au. All Brobo Machines & Parts include a 2 year Warranty. Certified System. Quality ISO 9001 AND OWNED

PRODUCT GUIDE BROBO GROUP. brobo.com.au. All Brobo Machines & Parts include a 2 year Warranty. Certified System. Quality ISO 9001 AND OWNED A L I F E T I M E O F R E L I A B I L I T Y PRODUCT GUIDE BROBO GROUP AND OWNED Certified System Quality ISO 91 TM All Brobo Machines & Parts include a 2 year Warranty S315D, S35D & S4B FERROUS METAL CUTTING

More information

1989 Jeep Cherokee. STEERING COLUMN' '1989 STEERING Jeep Steering Columns STEERING COLUMN STEERING Jeep Steering Columns

1989 Jeep Cherokee. STEERING COLUMN' '1989 STEERING Jeep Steering Columns STEERING COLUMN STEERING Jeep Steering Columns STEERING COLUMN 1989 STEERING Jeep Steering Columns DESCRIPTION All models use collapsible steering columns. All columns have integral ignition switch and locking device. Optional tilt wheel is available

More information

Automatic Drilling and Tapping Units

Automatic Drilling and Tapping Units Automatic Drilling and Tapping Units Contents Page Automatic drilling and tapping units... 25 Dimension sketches... 23 Introduction More mechanization in your drilling operations Simple and cost effective,

More information

Clamping Tools

Clamping Tools Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves

More information

Pneumatic spindles Pneumatic built-in motors

Pneumatic spindles Pneumatic built-in motors Pneumatic spindles Pneumatic built-in motors MANNESMANN DEMAG Always one step ahead Intelligent solutions to save time and costs As an insider you know that being at the cutting edge of automation is crucial

More information

BEST OF 2014 January December

BEST OF 2014 January December Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front

More information

Technical Information TI-B10 Safety Brakes type KSP. 2 Function. Contents

Technical Information TI-B10 Safety Brakes type KSP. 2 Function. Contents Technical Information SITEMA - Safety Brakes English translation of German original TI-B0-EN-0/0 Technical Information TI-B0 Safety Brakes type KSP High holding force by self-intensifying clamping Secure

More information

HSWH Series Hydraulic bottle jacks with 3 t or 5 t load-bearing capacity. HSWH-Pro series Hydraulic bottle jacks for professional deployment

HSWH Series Hydraulic bottle jacks with 3 t or 5 t load-bearing capacity. HSWH-Pro series Hydraulic bottle jacks for professional deployment Vehicle jacks Hydraulic lifts/trestles HSWH Series Hydraulic bottle jacks with 3 t or 5 t load-bearing capacity Jack with grooved lifting pad and screw extension Extremely durable cylinder Very low insertion

More information

Ground bearing pressure 1.1 kg/cm 2 2 HS 855 HD

Ground bearing pressure 1.1 kg/cm 2 2 HS 855 HD The operating weight includes the basic machine with HD undercarriage, 2 main winches 250 kn including wire ropes (90 m) and 18 m main boom, 2x hose reels (1 m), each with 120 m of hydraulic hose, consisting

More information

PULLERS GD_PG_$KT-K10-$KP-ABZI-$PG-UMABZ :31:24

PULLERS GD_PG_$KT-K10-$KP-ABZI-$PG-UMABZ :31:24 PULLERS INTERNAL EXTRACTORS Precision internal extractor Slide hammer Suitable for small ball bearings Ideal for limited access areas Centering shaft For the accurate fitting of bearings and bushes 660.0501

More information

General catalogue ALUCA accessories for your van racking systems

General catalogue ALUCA accessories for your van racking systems General catalogue ALUCA accessories for your van racking systems www.aluca.de Welcome to ALUCA ALUCA manufactures light-weight, strong and safe systems for those who are on the road each day. We offer

More information

SHOP MAINTENANCE. Open Throat ALL SHOP PRESSES AVAILABLE IN CE

SHOP MAINTENANCE. Open Throat ALL SHOP PRESSES AVAILABLE IN CE SHOP MAINTENAN 1 2 9 3 4 5 Open Throat 10 11 12 6 8 ALL SHOP PRESSES AVAILABLE IN THE UNIQUE BENEFITS OF THE POWER TEAM PRESS 1 2 TO 1 SAFETY FACTOR on hydraulic cylinders and they meet ASME B30.1 standards.

More information

CL2-B INSTRUCTION BOOKLET CONTENTS

CL2-B INSTRUCTION BOOKLET CONTENTS CONTENTS PAGE SUBJECT 1 Contents 2 Health & Safety Notice 3 Operating instructions 3 Extracting Old Rivets & Hints of Extracting 4 5 Clinching New Rivets & tooling selection 6 Anvil Height Adjustment 7

More information

KFE. Power-operated compensating chuck. Techincal features

KFE. Power-operated compensating chuck. Techincal features Power-operated compensating chuck Techincal features Toggle joint lever system Compensation for eccentricities is accomplished by means of a universal ball joint. Large through-hole Made of steel All moving

More information

Taladro automático por coordenadas Automatic coordinate drilling machine TECHNICAL CHARACTERISTICS

Taladro automático por coordenadas Automatic coordinate drilling machine TECHNICAL CHARACTERISTICS RAPID DRILL TRD SERIES FIXED BED-TYPE Equipment: automatic X- Y and Z -axis, driven by servo-motors (programmable) Spindle turning driven also by asynchrony motor of 8,9 kw or servomotor 4,4 kw. Column

More information

AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER

AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258

More information

OKLADKA ROZDZIALU 2405-K

OKLADKA ROZDZIALU 2405-K OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our

More information

Spring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec

Spring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet

More information

Die changing technique

Die changing technique Die changing Die changing 8 Contents Product group 8 Roller bar, hydraulically lifted for heavy loads (400 bar), lifting of the complete roller bar for medium loads (120 bar), lifting of individual rollers

More information

BSS Plate shears for sheet metals, paper and other material with collapsible substructure. Circular shears / Sheet metal shears

BSS Plate shears for sheet metals, paper and other material with collapsible substructure. Circular shears / Sheet metal shears Cutting Circular shears / Sheet metal shears New KS 1 - Manual circular shear to cut arcs of a circle in steel up to 1.0 mm KS 2 - Motor-driven circular shear to cut arcs of a circle in steel up to 2.0

More information

Technical data Hydraulic crawler crane HS 885 HD

Technical data Hydraulic crawler crane HS 885 HD Technical data Hydraulic crawler crane HS 885 HD Dimensions Basic machine with undercarriage R 6910 2850 8300 3500 2210 1420 4120 1400 1400 2725 5490 6750 2100 1000 4920 590 R 5520 15200 Operating weight

More information

PNEUMATIC TOOLS FOR PROFESSIONALS: GRINDING SPINDLES AND ROBOT TOOLS

PNEUMATIC TOOLS FOR PROFESSIONALS: GRINDING SPINDLES AND ROBOT TOOLS PNEUMATIC TOOLS FOR PROFESSIONALS: GRINDING SPINDLES AND ROBOT TOOLS Tough Consistent Proven MADE IN GERMANY www.westeccorp.com Table of contents Page 4 Pneumatic grinding spindles with vane motor Pneumatic

More information

Zero Point Clamping System classic 3

Zero Point Clamping System classic 3 Zero Point Clamping System classic 3 Set your manufacturing to Nullpunkt Spannsystem GO! Maximum productivity - even with large parts Using the zero point clamping system SPEEDY classic you will increase

More information

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings

More information

Technical data Hydraulic crawler crane HS 875 HD

Technical data Hydraulic crawler crane HS 875 HD Technical data Hydraulic crawler crane HS 875 HD Dimensions Basic machine with undercarriage R 5710 2580 8300 3500 2110 1300 1240 4020 1400 5330 2600 1000 530 6480 2240 4900 R 5520 14100 Operating weight

More information

Pneumatic Axial Die Grinder also for Underwater Use Type , 0050

Pneumatic Axial Die Grinder also for Underwater Use Type , 0050 M a s c h i n e n f a b r i k G m b H Pneumatic Axial Die Grinder also for Underwater Use Type 1 5077 0010 0020, 0050 Illustration can differ from the original Repair Manual and Compiled: 18.07.11 150770010_0020_0050_Inst_en_Version_00

More information

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center

More information

Swellex Pumps and MAI Grout Pumps

Swellex Pumps and MAI Grout Pumps Swellex Pumps and MAI Grout Pumps and Accessories from Atlas Copco Solutions from Materials Technology Swellex pumps from Atlas Copco The installation system for Swellex rock bolts consists of a high pressure

More information

UNIVERTOR A. Pick-up-turning centre. The systems supplier for manufacturing technology from one source

UNIVERTOR A. Pick-up-turning centre. The systems supplier for manufacturing technology from one source The systems supplier for manufacturing technology from one source A flexible pick-up turning system for small, medium and large-volume production UNIVERTOR A Pick-up-turning centre Pick-up-turning procedure

More information

Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity

Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting

More information

1. Manual clamps Standard range Horizontal and vertical clamps made from galvanised steel plate for ligth to medium clamping application

1. Manual clamps Standard range Horizontal and vertical clamps made from galvanised steel plate for ligth to medium clamping application 1. Manual clamps Standard range Horizontal and vertical clamps made from galvanised steel plate for ligth to medium clamping application Clamping tools for professionals Ergonomic plastic handle, mounted

More information

BEST OF 2015 January December

BEST OF 2015 January December BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January

More information

Ground bearing pressure 0.98 kg/cm 2. Main boom (No xx) max. length Fixed jib (No xx)

Ground bearing pressure 0.98 kg/cm 2. Main boom (No xx) max. length Fixed jib (No xx) The operating weight includes the basic machine with HD under carriage, 2 main winches 250 kn including wire ropes (90 m) and 11 m main boom, consisting of A frame, boom foot (5.5 m) and boom head (5.5

More information

Pneumatic spindles Pneumatic built-in motors

Pneumatic spindles Pneumatic built-in motors Pneumatic spindles Pneumatic built-in motors MANNESMANN DEMAG Always one step ahead Intelligent solutions to save time and costs As an insider you know that being at the cutting edge of automation is crucial

More information

CAPTIS. The modular and flexible system for internal and external clamping

CAPTIS. The modular and flexible system for internal and external clamping NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high

More information

5500 lb. Capacity Hand Pallet Truck

5500 lb. Capacity Hand Pallet Truck 5500 lb. Hand Pallet Truck Powder coated hydraulic pump, robust and durable, with fine control of lowering speed and overload bypass valve. Polyurethane wheels: great for delicate floors with hard wearing

More information

GARAGE EQUIPMENT NATIONWIDE SALES SERVICE INSTALLATION AUTOQUIP. Garage & Tyre Equipment CORK. Phone: Website:

GARAGE EQUIPMENT NATIONWIDE SALES SERVICE INSTALLATION AUTOQUIP. Garage & Tyre Equipment CORK. Phone: Website: GARAGE EQUIPMENT NATIONWIDE SALES SERVICE INSTALLATION AUTOQUIP Garage & Tyre Equipment CORK Two-Post Lifts PA-6140A Manual Lock Release PA-6140D Electric Lock Release P Our lifts are fitted with a low

More information

METAL. Faster core drilling. In metal, in any situation. FEIN core drills KBU and KBH powerful and universal tools for efficient metal drilling.

METAL. Faster core drilling. In metal, in any situation. FEIN core drills KBU and KBH powerful and universal tools for efficient metal drilling. METAL Faster core drilling. In metal, in any situation. FEIN core drills KBU and KBH powerful and universal tools for efficient metal drilling. NEW CORE DRILLING Get to the core of the matter faster. With

More information

Service Crimpers. Compact, mobile and powerful. Greaseless. Universal. Ecoline. Ergonomic

Service Crimpers. Compact, mobile and powerful. Greaseless. Universal. Ecoline. Ergonomic Service Crimpers Compact, mobile and powerful. Greaseless Slide bearings on the crimp tool improve efficiency up to 20%, reduce friction and help keep the tool free of contaminants. Universal For all types

More information

Technical data Hydraulic crawler crane HS 845 HD

Technical data Hydraulic crawler crane HS 845 HD Technical data Hydraulic crawler crane HS 845 HD Dimensions Basic machine with undercarriage 2870 8000 3000 1800 1330 3350 1100 1200 5000 5920 2500 1590 700 4500 330 R 4580 11860 Operating weight The operating

More information

Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity

Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting

More information

Technical data Hydraulic crawler crane HS 895 HD

Technical data Hydraulic crawler crane HS 895 HD Technical data Hydraulic crawler crane HS 895 HD Dimensions Basic machine with undercarriage R 9760 3650 10000 5480 3675 2445 1810 3950 1610 1700 7945 9360 3975 1720 R 6360 1100 6800 620 17380 Operating

More information

CONTENTS ONE YEAR LIMITED WARRANTY

CONTENTS ONE YEAR LIMITED WARRANTY CONTENTS SIDE PUMP BOTTLE JACKS 3 AIR ACTUATED BOTTLE JACKS 4 FAST LIFT SERVICE JACKS 5 SERVICE JACK 5 LOW PROFILE FAST LIFT SERVICE JACK 6 3 TON FAST LIFT SERVICE JACK AND 3 TON JACK STANDS 6 COMBO AIR

More information

To, Purchase Manager SUB. : LIST OF USED MACHINES WITH SPECIFICATION

To, Purchase Manager SUB. : LIST OF USED MACHINES WITH SPECIFICATION Page - 1 To, Purchase Manager SUB. : LIST OF USED MACHINES WITH SPECIFICATION Dear Sir, We are pleased to enclose our offer for the following machines :- Draw Bench Semi Duty Twin HP 30 RPM 1500 (60' X

More information

Case Material. Output to R.P.M. Steel or Aluminum 0.9 H.P. 675 W

Case Material. Output to R.P.M. Steel or Aluminum 0.9 H.P. 675 W HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual GOVERNED SPEED DIE GRINDER WITH ERICKSON COLLET FEATURING A SIDE EXHAUST Model Number Exhaust Direction Throttle Type 4721GL

More information

ATTACHMENTS FOR LOADER CRANES

ATTACHMENTS FOR LOADER CRANES ATTACHMENTS FOR LOADER CRANES 2012 Rotators page KM 03 S Rotator with shaft 11 KM 04 S Rotator with shaft 11 KM 04 F Rotator with flange 11 KM 06 F Rotator with flange 12 Brick Stack Grapples KM 332V-1100

More information

Reaction Torque Sensor

Reaction Torque Sensor Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.

More information

Model MC-21 Impact Press. Operation & Maintenance Instructions. Revised 9/20/07

Model MC-21 Impact Press. Operation & Maintenance Instructions. Revised 9/20/07 Model MC-21 Impact Press Operation & Maintenance Instructions Revised 9/20/07 1 WARNINGS 1. Safety glasses must always be worn by the machine operator, as well as any co-workers, or any other persons in

More information

PLM series Permanent load lifting magnets

PLM series Permanent load lifting magnets Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever

More information

Bridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since

Bridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since Bridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since 1948. 49 Rev. 2010-04-14 Economically priced Robust design

More information

Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses

Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses Mechanical equipment ST 1092 ST 1292 page 7.03 ST 9041 page 7.04 ST 9062 page 7.05 ST 9067 page 7.05 ST 9072 page 7.06 ST 9075 page

More information

5500 lb. Capacity Standard Hand Pallet Truck

5500 lb. Capacity Standard Hand Pallet Truck 5500 lb. Standard Hand Pallet Truck Powder coated hydraulic pump, robust and durable, with fine control of lowering speed and overload bypass valve. Polyurethane wheels: great for delicate floors with

More information

TRADEquip GARAGE EQUIPMENT

TRADEquip GARAGE EQUIPMENT Page 23 Industry Leaders Established 1977 For more information: Email: sales@lgtools.co.za Tel: +2731 717 6800 Fax: +2731 717 6868 Visit our website: www.lgtools.co.za 1 YEAR WARRANTY Bottle Jacks 2.0

More information

Pipe cutting machine. REMS Cento REMS Cento RF. for Professionals

Pipe cutting machine. REMS Cento REMS Cento RF. for Professionals Pipe cutting machine REMS Cento REMS Cento RF for Professionals 5 Patent EP 1 782 904 Super fast. Right angled. Chip-free. No outer burr. Dry cutting. German Quality Product 1 12 3 6 4 9 13 2 14 1 11 10

More information

Pipe cutting machine. REMS Cento REMS Cento RF. for Professionals

Pipe cutting machine. REMS Cento REMS Cento RF. for Professionals Pipe cutting machine REMS Cento REMS Cento RF for Professionals 5 Patent EP 1 782 904 Super fast. Right angled. Chip-free. No outer burr. Dry cutting. German Quality Product 1 12 3 6 4 9 13 2 14 1 11 10

More information

SPRINT linear Series. Highly productive automatic turning with linear Direct Drives

SPRINT linear Series.  Highly productive automatic turning with linear Direct Drives www.dmgmori.com SPRINT 20 8 linear SPRINT 42 8 linear SPRINT 42 10 linear SPRINT 32 / 42 linear CLASSIC Highly productive automatic turning with linear Direct Drives Series Applications and parts Machine

More information

M39075 ( IF- 1) Integra- Fuse Rivet Tool

M39075 ( IF- 1) Integra- Fuse Rivet Tool M39075 ( IF- 1) Integra- Fuse Rivet Tool Marson is making installation easier than ever with the new Marson Integra-Fuse (IF-1) It s the one-and-only tool needed for single-pull installations of open-end

More information

Removal and Installation of Fuel Injection Pumps

Removal and Installation of Fuel Injection Pumps Page 16 of 126 worn considerably. Fig. C shows how the flat end of a new plunger makes poor contact with a worn lifter, resulting in rapid wear to both parts. An injection pump can have a good fuel flow

More information

Machine elements. Pneumatic stamping unit. Toggle-lever presses

Machine elements. Pneumatic stamping unit. Toggle-lever presses Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07

More information

MICHIGAN PNEUMATIC TOOL

MICHIGAN PNEUMATIC TOOL MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders

More information

KFD-HE. Power chucks with through-hole

KFD-HE. Power chucks with through-hole K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.

More information

Servo/Hydraulic Press Brake With Automatic Tool Changer HD 1003 ATC

Servo/Hydraulic Press Brake With Automatic Tool Changer HD 1003 ATC Servo/Hydraulic Press Brake With Automatic Tool Changer HD 1003 ATC The HD NT Press Brake An ultra-high precision, down-acting system featuring advanced hydraulics that provide the ultimate in positioning

More information

P&N/SUTTON. A trusted name, serving Canadian industries since

P&N/SUTTON. A trusted name, serving Canadian industries since /SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)

More information

Heat treated cylinder wall and chromed piston

Heat treated cylinder wall and chromed piston JULY AUG SEPT 2015 AXLE OIL DRAIN PAN MODEL 8830 & 8831 Catches Oil from hubs after removing the cap Fits on the rims of buses, trailers and large trucks Prevents an oil mess during wheel repair Side opening

More information

Alpine geared cable winches. Profiable technology for the private forestry industry

Alpine geared cable winches. Profiable technology for the private forestry industry 16 Profiable technology for the private forestry industry 17 The series of three-point alpine winches has been designed for semi-professional and forestry workers. The demand for the technology is the

More information

PROVEN CHUCK WITH SPIRAL RING

PROVEN CHUCK WITH SPIRAL RING PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping

More information

JACKS & LIFTS JACKS & LIFTS BOTTLE JACKS JACK STANDS JACKS & LIFTS JACK PACKS JACKS & LIFTS UNDER HOIST STANDS. Bottle Jacks - Stands

JACKS & LIFTS JACKS & LIFTS BOTTLE JACKS JACK STANDS JACKS & LIFTS JACK PACKS JACKS & LIFTS UNDER HOIST STANDS. Bottle Jacks - Stands BOTTLE JACKS TEQ Correct Professional 12 Ton Short Professional Bottle Jack EQP 3113 JACK STANDS Low Height: 12 3/16" Raised Height: 18 7/8" TEQ Correct Professional 3 Ton Ratcheting Professional Series

More information

1 01 / 201 Edition ED. 01/2007

1 01 / 201 Edition ED. 01/2007 Edition 01 / 2011 ED. 01/2007 TABLE OF CONTENENTS 1 INTRODUCTION 2 GRIPPER EXAMPLES 2.1 EXAMPLE A: GRIPPER WITH TUBES AND ALUMINIUM PROFILES 2.2 EXAMPLE B: GRIPPER WITH STAINLESS STEEL TUBES 2.3 EXAMPLE

More information

Multi-Purpose Milling Machine

Multi-Purpose Milling Machine Multi-Purpose Milling Machine MF most widely used milling machine type world-wide! MF 1 speed change through v-belt change-over Multi-Purpose Milling Machine for workshops, single part production, design,

More information

ROTARY MODULES. Rotary modules

ROTARY MODULES. Rotary modules Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186

More information