QF PERFORMANCE CATALOG
|
|
- Myrtle Turner
- 5 years ago
- Views:
Transcription
1 QF PERFORMANCE CATALOG
2 QualFast Table Of Contents Component (Prefix) Page Street Performance Valves (53-)... 1 Racing Valves (12-)... 3 Sport Compact High Performance Valves (51-)... 3 Black Lightning Racing Valves (77-)... 4 Performance Cylinder Heads (15-)... 6 Performance Cylinder Head Kits(15-*-K)... 7 Manganese Bronze and Hardened Cast Iron Guides (30- & 31-)... 8 High Performance Springs (52-) High Performance Keepers (34-) High Performance Spring Kits (52-*-SK) High Performance Retainers (55-) High Performance Spring Inserts, Cups, and Locators (33-) Performance Lifters and Lifter Guides(36-) High Performance Valve Stem Seals (38-) Performance Rocker Arms (40-) and Roller Rocker Sets (45-) Performance Rocker Kits (41-) and Rocker Studs (42-) Push Rods (74-) Push Rod Measuring Tools (74-) Guide Plates (75-) Warranty / Disclaimer The purchaser is solely responsible for determining the suitability of any and all products obtained from QualCast, LLC, for any given application or purpose. Purchaser understands that all parts listed in catalog offered by QualCast are subject to varied conditions beyond the control of QualCast. The decision to use any product or service for any application or situation rests entirely upon said purchaser. The purchaser further agrees that anything received from QualCast carries no warranty, fitness of purpose, or guarantee of merchantability. This applies to all things expressed or implied, oral or written to purchaser and/or end All manufacturers names, numbers and descriptions are used for reference purposes only and do not imply that any part listed is the product of those manufacturers.
3 QUALFAST STREET PERFORMANCE VALVES Our "53-" Street Performance valves are made of a high grade stainless (21-2N) steel, for street and mild racing applications, manufactured to the same precision as our other series including swirl polished underheads and undercut stems. Packaged in matched sets of 8 per box. * Swirl Polished Underheads * Chrome-Plated Stems * Wafer-Welded Tips * Undercut Stems Part No Head Diameter Length Stem Diameter I/E Tip No. Gr Note Small Block Chevrolet Exh Exh Exh Exh Exh Int Exh Exh Int Int Int Int Int Int Int Int Int Int Int Int Int Chevrolet LS Exh LS Exh LS Exh LS7, 21-4N Matl Int LS Int LS Int LS7, 21-4N Matl. Page 1
4 Part No Head Diameter Length Stem Diameter I/E Tip No. Gr Note Olds / Pontiac V Exh Exh Exh Exh Int Deg., Not SS, Int. Matl Int Deg Int Deg Big Block Chevrolet Exh Exh Exh Exh Exh Int Int Int Int Int Int Small Block Ford Exh Exh Exh Exh Int Int Int Ford Big Block Exh Exh Exh Exh Exh Int Int Int Deg Int Int Int Int Int Not SS, Int. Matl. Chrysler Small Block Exh Int Chrysler Big Block Exh Int Page 2
5 QUALFAST RACING VALVES Our 12- Racing Valve Series with 21-4N material and racing design specifications is being replaced by the 77-Black Lightning Series. The 77- Series adds Black Plasma Nitriding for the same value. Here are approximate interchange part numbers for your convenience. Please note exact dimensions may be slightly different. 12- # 77-# 12- # 77-# QUALFAST SPORT COMPACT H.P. VALVES * Premium One-Piece Stainless Steel * Straight and Undercut Valve Stems * Swirl Polished Underheads * Wafer-Welded Tips * Chrome-Plated Stems Our 51- Sport Compact line combines 21-4N Stainless Steel material with both swirl-polished straight stems, and swirlpolished undercut stems for maximum flow and efficiency. Acura/Honda B16A-3, B17A, B18C1-5 VTEC Part No Head Diameter Length Stem Diameter I/E Tip Note mm mm 5.5 mm Exh 2.5 mm Nitrided mm mm 5.5 mm Exh 2.5 mm mm mm 5.5 mm Int 2.5 mm Undercut, Nitrided mm mm 5.5 mm Int 2.5 mm Undercut Page 3
6
7 QUALFAST BLACK LIGHTNING RACING VALVES Our "Black Lightning" Racing valves are manufactured using the highest quality Stainless Steel, plus they are plasma nitrided on the stem and top of valve for exceptional wear resistance, strength, and ductility. The underheads are swirl polished stainless and the heads are designed with thinner margins to reduce weight and inertia. Part No Head Diameter Length Stem Diameter I/E Tip Note Small Block Chevrolet Exh Exh Exh Exh Exh Int Int Int Int Int Int Chevrolet LS Exh LS Exh LS Exh LS Exh LS Int LS Int LS Int LS Int LS7 Big Block Chevrolet Exh Exh Exh Exh Int Int Int Int Int Int Int Small Block Ford Exh Int Ford Big Block Exh Int Page 5
8 QUALFAST PERFORMANCE CYLINDER HEADS New Performance Cylinder Heads are Individually Cast using the latest techniques. All machined surfaces performed by CNC, including bolt holes, to achieve extreme accuracy in finishing. OEM bolt pattern for compatibility. * Meets and Exceed OEM Specifications * Chambers Designed For Improved Flow *Custom Designed Heads * Aluminum is T6, Heat Treated. Photo Part No Intake Runner CC Chamber CC Intake Shape Decription Exhaust Runner CC Plugs Exhaust Shape Note Rectangle SBC Aluminum 68.5 Straight Rectangle Cathedral LS1 Aluminum 76 Angle Irregular Rectangle LS3 Aluminum 82 Angle Irregular Rectangle LS7 Aluminum 85 Angle Irregular Oval BBC Oval Aluminum Angle Rectangle Rectangle BBC Aluminum Angle Irregular SBF Aluminum Rectangle Angle Rectangle 289, 302 Requires 1/2"-7/16" Stepped Head Bolt BBF Aluminum Oval Angle Irregular Wider Push Rod Bores Page 6
9 QUALFAST PERFORMANCE CYLINDER HEAD KITS Head Kits are for one engine and can be customized with your requested components. The below kits are examples with common components. Add, remove, or change- call to design your custom Performance Head Kit. Kit # Description Notes Cyl. Head-2 Exh Valve-8 Int Valve-8 Springs-16 Keepers-32 Retainers- 16 SpringShim- Stem Seal Guide Plate- 8 Rocker Stud K01 SBC Std., K06 SBC Std., K11 SBC +100, K16 SBC +100, K01 LS1 53 Con L K02 LS1 53 Dua L K06 LS1 77 Dua L K07 LS1 77 Con L December 1, 2017 Rev. 2 Replaces Page 7 of QualFast 1 of 2
10 QUALFAST PERFORMANCE CYLINDER HEAD KITS Head Kits are for one engine and can be customized with your requested components. The below kits are examples with common components. Add, remove, or change- call to design your custom Performance Head Kit. Kit # Description Notes Cyl. Head-2 Exh Valve-8 Int Valve-8 Springs-16 Keepers-32 Retainers K01 LS3 53 Con SpringShim -16 Stem Seal L K02 LS3 53 Dua L Guide Plate -8 Rocker Stud-16 LS3 53 Dua TiRet K03 Machined Keeper, Titanium Retainer MacKee L K06 LS3 77 Con L K07 LS3 77 Dua L K01 LS7 53 Con L K02 LS7 53 Dua L K06 LS7 77 Con L K07 LS7 77 Dua L K21 BBC Oval +, 53- Head Req. Intake Valve To Be.150" Longer; Chg. GP N/A Yet * K26 BBC Oval +, 77- Head Req. Intake Valve To Be.150" Longer; Chg. GP N/A Yet * K21 BBC Rect. +, 53- Head Req. Intake Valve To Be.150" Longer; Chg. GP N/A Yet * K26 BBC Rect. +, 77- Head Req. Intake Valve To Be.150" Longer; Chg. GP N/A Yet * K01 SBF 53- Chg. Valves to SBC +100; Chg. Spr Cup K02 SBF 53- ChSp Chg. Valves to SBC +100; Chg. Spr Cup; Chg Spring K06 SBF K01 BBF 53- Chg. Exh. Valve; Chg. Guide Plate K06 BBF 77- Chg. Guide Plate *BBC Req. Bending - Avail. w/o Guide Plate Until Avail. Jan December 1, 2017 Rev. 2 Replaces Page 7 of QualFast 2 of 2
11 MANGANESE BRONZE AND HARDENED CAST IRON GUIDES Manganese Bronze guides are precision machined from the highest quality, specially formulated material. This material offers improved thermal conductivity, lower friction, higher strength, and superior corrosion resistance. Our Hardened Cast Iron Guides are manufactured from a special premium cast iron alloy, then heat treated to 25 Rockwell C Part No I.D. O.D. Length SealOD FlangeOD Part No I.D. O.D. Length SealOD FlangeOD Material: MANGANESE BRONZE Chevrolet LS Ford 4.6L 7mm Valve Stem Universal Universal We Build Custom Valve Train Kits! Choose your Performance Valves, Springs, Retainers, Keepers, VSIs, Stem Seals, and add any other components you want to create your custom Kit Page 8
12 Part No I.D. O.D. Length SealOD FlangeOD Part No I.D. O.D. Length SealOD FlangeOD Universal Acura/Honda B16A-3, B17A, B18C1-5 VTEC Honda Prelude H22A Ford Focus 2.0L DOHC ZETEC Volkswagen 1.9, 2.8L 7mm Volkswagen V, 2.7, 2.8, 3.0L 30V 6mm Material: CAST IRON Universal H H H H H H H H We Build Custom Valve Train Kits! Choose your Performance Valves, Springs, Retainers, Keepers, VSIs, Stem Seals, and add any other components you want to create your custom Kit Page 9
13 QUALFAST HIGH PERFORMANCE SPRINGS Manufactured by the industry-leading high performance valve spring factory, QualFast high performance springs employ the latest materials and manufacturing processes. All QualFast springs are wound using super-clean chrome silicon or new Alpha1 or 3 alloy wires. Our springs are engineered for high performance, giving optimum lift and preventing valve float. Type: SGL = Single, SWD = Single with Damper, CON = Conical, DUA = Dual, DWD = Dual with Damper Part No Max Lift O.D. I.D. Closed Load Open Load Type Coil Bind Retainers Note Domestic Performance SGL SWD Dual Inner GM L6, V SWD SWD , SWD SWD SWD SWD SWD SWD T CON Ford 4.6L 2V Ovate T CON , DUA , SWD , SWD , DUA DUA SWD DUA DWD SWD , Chev. LS Page 10
14 Part No Max Lift O.D. I.D. Closed Load Open Load Type Coil Bind Retainers Note DWD , , DUA , DUA , DWD , DUA , DWD , Diesel Performance Chev. LS SGL SGL SGL SGL FOR 6.0L, 6.4L Diesel CUM 5.9L, 6.7L 24V GM 6.6L Duramax Cummins 12V Acura/Honda B16A-3, B17A, B18C1-5 VTEC mm 15.5m DUA 19mm QUALFAST HIGH PERFORMANCE KEEPERS QualFast High Performance Keepers are all heat treated and are designed to fit with our High Performance retainers and valves. Sold and priced by the piece (each, 2 per valve). 7 Degree unless noted. Part No Stem No. Beads Type Application Round FOR, HON 5.5mm Round CHC, Mit. 6mm Round Mit, Hon 6.5mm Round FDI, FOR, LAN, MAZ Round GM LS, TOY 8mm Round GM LS1 Machined M Square TOY 22R Machined Square HP 10 Deg -50, Lower Spring Inst. Height L Square 10 Deg. For Lash Cap Square Universal 11/ Square HP +50 Taller Spring Inst. Height Square HP -30 Lower Spring Inst. Height Square HP -60 Lower Spring Inst. Height Square Universal 3/ Round CHI, CHM, CHC, IHC, IHN Page 11
15 QUALFAST HIGH PERFORMANCE SPRING KITS Our Performance Spring Kits Include 16 Springs, 16 Retainers and 32 Keepers Designed to Function Together to Give You Maximum Performance. Part No Max Lift \ Kit Contents Spring O.D. \ Description Loads \ Specifications SK Single w/ Damper Deg Retainer 11/32 x Deg Keeper 11/ SK Single w/ Damper Deg Retainer 11/32 x Deg Keeper 11/ SK Single w/ Damper Deg Retainer 3/8 x Deg Keeper 3/ SK Single Conical Deg Retainer 8mm x Deg Keeper 8mm SK Single Conical Deg Retainer 8mm x Titanium Deg Keeper 8mm SK Single Conical Deg Retainer 7mm x Deg Keeper 7mm SK @ Dual Deg Retainer 11/32 x Deg Keeper 11/ SK Single w/ Damper Deg Retainer 11/32 x Deg Keeper 11/ SK Dual w/ Damper Deg Retainer 11/32 x Deg Keeper 11/ SK Dual w/ Damper Deg Retainer 3/8 x Deg Keeper 3/8 Page 12
16 Part No Max Lift \ Kit Contents Spring O.D. \ Description Loads \ Specifications SK Single w/ Damper Deg Retainer 11/32 x L 10 Deg Keeper 11/ SK Dual Deg Retainer 11/32 x Deg Keeper 11/ SK Single w/ Damper Deg Retainer 11/32 x Deg Keeper 11/ SK Single w/ Damper Deg Retainer 11/32 x Deg Keeper 11/ SK Dual Deg Retainer 11/32 x Deg Keeper 11/ SK Dual w/ Damper Deg Retainer 11/32 x L 10 Deg Keeper 11/ SK Dual w/ Damper Deg Retainer 11/32 x Titanium L 10 Deg Keeper 11/ SK Dual Deg Retainer 3/8 x Deg Keeper 3/ SK Dual Deg Retainer 11/32 x L 10 Deg Keeper 11/ SK Dual w/ Damper Deg Retainer 11/32 x L 10 Deg Keeper 11/ SK Dual w/ Damper Deg Retainer 11/32 x L 10 Deg Keeper 11/ SK Dual w/ Damper Deg Retainer 11/32 x Titanium L 10 Deg Keeper 11/32 Page 13
17 QUALFAST HIGH PERFORMANCE RETAINERS Precision Machined From Chrome Moly or Titanium, our High Performance Retainers are specially designed to work with our High Performance Springs. Part No Stem Dia O.D. Step 1 Dia. Step 2 Dia. Deg. Matl. Note Domestic Performance / Chrome Moly / ChromeMoly / ChromeMoly / ChromeMoly / ChromeMoly / Titanium / ChromeMoly / ChromeMoly / ChromeMoly / ChromeMoly / Chrome Moly / ChromeMoly / ChromeMoly / Titanium / ChromeMoly / ChromeMoly / ChromeMoly / ChromeMoly / ChromeMoly / ChromeMoly / ChromeMoly / ChromeMoly mm ChromeMoly mm ChromeMoly mm ChromeMoly mm Titanium mm ChromeMoly mm ChromeMoly mm Titanium mm ChromeMoly mm Titanium mm ChromeMoly mm Titanium Diesel Performance Chrome Moly Chrome Moly Import Performance mm 28mm 21.7mm 15.4mm 7 Titanium mm ChromeMoly Page 14 Use w/ Conical Spring GM Vortec 86-Up GM GM Std. SBC Std. SBC Buick 231 Ford 2.3L Ford L6 300 Ford Buick 455 Chry. 318 GM Chry. 360 Ford 4.6L Late GM 2.2L Ford 4.6L Early GM LS1 GM LS1 GM 3.1L GM LS1 LS1 GM LS1 GM LS1 GM LS1 FOR 6.0, 6.4L GM 6.6 Duramax Acura/Honda B16A-3, B17A, B18C1-5 VTEC Toyota 22R
18 QUALFAST HIGH PERFORMACE SPRING INSERTS, CUPS, AND LOCATORS QualFast HP Spring I.D. Locators, part numbers 33-****-L, are manufactured from chrome moly with black oxide finish. The inside edge on these inserts keeps the spring centered. Outside Cups, also in chrome moly with black oxide, 33-5***, control spring walk with an outside lip. Flat HP Valve Spring Inserts have heat-retarding serrations with a blue tint indicating heat treatment. Part No Thickness O.D I.D. Spring I.D. / O.D Part No Thickness O.D I.D. Spring I.D. / O.D I.D. Locator Valve Spring Insert L L L L L L L Outside Cup Page 15
19 QUALFAST HIGH PERFORMANCE LIFTERS QualFast hydraulic retro-fit roller lifters and , are designed to upgrade early or late model blocks to allow for a hydraulic roller camshaft with more aggressive cam profile. They feature cold-formed, carbon nitrided, tempered bodies with hardened and tempered steel alloy roller wheels, and stainless, heattreated cross bars. QC # Type Length O.D. Application CCI Hydraulic GM Flat Chilled Cast Iron CCI Hydraulic FOR Flat Chilled Cast Iron Mechanical GM Early Hydraulic GM SBC Retro-fit Pair with Bar Hydraulic GM BBC Retro-fit Pair with Bar CCI Hydraulic CHC Chilled Cast Iron Hydraulic GM Vortec Roller G Guide GM Vortec Dogbone Guide Hyraulic GM BBC Roller G Guide GM BB Dogbone Guide QualFast hydraulic "flat" lifter CCI is a 2-piece steel body with Chilled Cast Iron wafer bottom. Parts CCI, and CCI, with one-piece bodies, feature chilled cast iron material, which works better with cam lobe material in all applications where lobe to crown friction is a concern CCI CCI Page G
20 QUALFAST HIGH PERFORMANCE VALVE STEM SEALS HP TE H.P. Polymer All Teflon Part No Nom. Nom. Stem Guide Dia. O.D. A B C D Part No Nom. Nom. Stem Guide Dia. O.D. A B C D / / / MC Metal Clad / / / / / TH Top Hat Part No Nom. Nom. Stem Guide Dia. O.D. A B C D Part No Nom. Nom. Stem Guide Dia. O.D. A B C D Material Denoted by Suffix: -45, 55 Viton/Metal -75 All Teflon Page High Performance Polymer Please Refer To Our QualCast Catalog for over 200 additional stem seals in various materials.
21 QUALFAST ROCKER ARMS QualFast Rocker Arms Listed Here Are Stock Tip With Superior Heat Treatment. Self-Aligning Styles Add Guide Rails. All But (Early Ford) Are Stamped Steel For High Performance. New LS and have Caged Bearings and improved, smoother trunions Part No Ratio Slot Description Application Long Rocker Arm, Self-Aligning Stamped 3/8" Stud Small Block Chevrolet Long Rocker Arm, Stamped 3/8" Stud Small Block Chevrolet Stock Rocker Arm, Self-Aligning Stamped 3/8" Small Block Chevrolet Stock Rocker Arm, Stamped 3/8" Stud Small Block Chevrolet Long Rocker Arm, Self-Aligning Stamped 3/8" Stud Small Block Chevrolet Long Rocker Arm, Stamped 3/8" Stud Small Block Chevrolet Rocker Arm, w/ Pivot, Bolt LS, 3.5, 3.9L OE Chevrolet LS Rocker Arm, LS1 Straight HP Caged Bearings Chevrolet LS Rocker Arm, LS3 Offset HP Caged Bearings Chevrolet LS Long Rocker Arm, Stamped For >0.560 Lift Big Block Chevrolet Stock Rocker Arm, Stamped Big Block Chevrolet Stock Rocker Arm, Cast w/ Rails 289, 302, 351 Small Block Ford Stock Rocker Arm, Stamped 302 '78-98, 351 Small Block Ford Stock Rocker Arm, Stamped Ford Big Block QUALFAST HP ROLLER ROCKER SETS QualFast Roller Rockers have roller tips and are manufactured from Stainless Steel, which provides durability compared to aluminum, allowing less fatigue under higher loads. Sold in sets, each set contains 16 roller rockers, and 16 Poly Locks with black anodized finish. Part No Ratio Stud Description /8" Small Block Chevrolet /16" Big Block Chevrolet /8" Small Block Ford Page 18
22 These Kits Are Per Rocker Arm, and Require 16 per Engine for 16V Engines QUALFAST ROCKER KITS QC # Application Description GM SBC , /8 Nut, Grooved Ball GM SBC , Smooth Ball, /8 Nut GM SBC , Smooth Ball, /8 Nut GM SBC , /8 Nut, Grooved Ball GM SBC , /8 Nut, Grooved Ball GM SBC , Smooth Ball, /8 Nut GM SBC , /8 Nut, Grooved Ball GM BBC , /16 Nut, Grooved Ball GM BBC , /16 Nut, Grooved Ball FOR , Grooved Ball, /8 Nut, /16 Nut FOR , /16 Bolt, Pivot FOR , Bolt, Pivot QUALFAST ROCKER STUDS QualFast Rocker Studs Are Made of Steel With Black Oxide Finish for Increased Hardness. Threads Are Cold Rolled. Part No Stud Thread A Effect Stud Length B Base Thread C Overall Length D / /16-14 Hex / /16-14 Hex / /16-14 Hex / /16-14 Hex / /16-14 Hex / /16-14 Hex / /16-14 No Hex / /16-14 Hex Page 19
23 QUALFAST PUSH RODS QualFast Push Rods Are Heat Treated Chrome Moly Suitable For Use With Guide Plates with additional Black Oxide Finish. Type: P = Pressed S = Swedged W = Welded QC # Length O.D. Type Tip 1 Tip2 Application /16X.060 W O O GM 173, 189, /16X.060 W O O FOR /16X.060 W O O GM SB /16X.075 W O O LS /16X.060 W O O GM SB, AMC /16X.075 W O O GM BB Int /16X.075 W O O GM BB Exh /16X.075 W O O GM BB Exh /16X.060 W O O FOR 351M, /16X.060 W O O FOR 240, /8X.060 S O O GM BB Int /8X.060 S O O GM BB Exh QUALFAST PUSH ROD MEASURING TOOLS QualFast Push Rod Meauring Tools are designed to easily determine proper push rod length during any engine rebuild. These 5/16" thin wall rods are precision crafted with over 1" of travel, 5/16" balls, and black oxide finish. QC # Application Measuring Tool " Measuring Tool " Measuring Tool " Measuring Tool " Page 20
24 QUALFAST GUIDE PLATES QualFast Guide Plates are formed from steel, heat treated and coated with black oxide to ensure hardness and durability. Part No Dia. Type Application Photo /16 Flat SBC A 5/16" Adjustable SBC /8" Flat SBC /8 Stepped BBC /16 Flat SBF /16 Stepped FOR 351C /8 Stepped BBC Page 21
25 qualcast, LLC 1854 Air Lane Drive, Unit 10 Nashville, TN USA Telephone: Toll Free US and Canada: Fax: Web: qualcast.net Mobile App: ymme.biz
ALVE LOCKS. 7 vs SUPER 7 vs 10 VALV 7 STAMPED VALV 7 MACHINED VALV
1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY 08701 VALVE LOCKS 7 vs SUPER 7 vs 10 VALV ALVE LOCKS The original stamped 7 valve lock served the industry well until drag racers discovered the Vasco Jet valve
More informationMotorcycle cover images courtesy of Luke Leatherman
Motorcycle cover images courtesy of Luke Leatherman VALVE TRAIN COMPONENTS VALVES The standard of the industry since their inception, Manley valves are designed to outflow and outperform all others even
More informationSPORT T COMPACT CAT ALOG
2004 CAT ALOG For over 38 years Manley Performance has provided superior quality internal engine components for the most demanding and extreme applications in the domestic V-8 market. We are now focusing
More informationALVE LOCKS. 7 vs SUPER 7 vs 10 VALV 7 STAMPED VALV 7 MACHINED VALV
1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY 08701 VALVE LOCKS 7 vs SUPER 7 vs 10 VALV ALVE LOCKS The original stamped 7 valve lock served the industry well until drag racers discovered the Vasco Jet valve
More informationHeat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under 7500 rpm
PUSHRODS Small Block Chevrolet Swedged End Pushrods.080 Wall 1010 Steel Heat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under
More informationR-Series Cylinder Heads for Big Block Chevy
Overview Material TFS-41400004 A356-T6 Combustion Chamber Intake Port Exhaust Port Sizes 122cc 340cc 137cc 2.25 in. Intake, Springs 1.530 in. Dual Springs for Mechanical Flat Tappet and Hydraulic Locks
More informationManley Valve Locks... simply the best! Conventional vs. Bead Loc Valve Stem Grooves
VALVE LOCKS Manley Valve Locks... simply the best! Conventional vs. Bead Loc Valve Stem Grooves The groove in a valve stem, seemingly unimportant, in reality is vital to the success of a valve s performance.
More informationVisit our website at
EP 2012 NATIONWIDE DISTRIBUTION CENTERS PLUS 5 NEW Locations In Australia Alaska Anchorage 800-288-5573 Arizona Phoenix 888-272-0191 California Anaheim 800-634-0969 Los Angeles 800-995-0536 Oakland 800-234-1410
More informationMissouri Kansas City New Mexico Albuquerque Ohio Cincinnati Oklahoma Oklahoma City
EP 2018 NATIONWIDE DISTRIBUTION CENTERS PLUS 5 Locations In Australia Alaska Anchorage 800-288-5573 VT NH Arizona Phoenix 888-272-0191 California Anaheim 800-634-0969 Los Angeles 800-995-0536 DE MD NJ
More informationDania Beach, FL Kansas City, MO Minneapolis, MN Worceser, MA. STERLING ENGINE PARTS KITS (5487) -
STERLING ENGINE PARTS 888-765-KITS (5487) - www.sbi.qwik-order.com EP 2015 NATIONWIDE DISTRIBUTION CENTERS PLUS 5 Locations In Australia Alaska Anchorage 800-288-5573 Arizona Phoenix 888-272-0191 California
More informationPushrod Accessories & Rev Kits
Pushrod Accessories & Rev Kits PUSHROD GUIDE PLATES Crower s pushrod guide plates are specially hardened for added strength and durability. They are positioned on the rocker arm studs to guarantee proper
More informationPLATINUM SERIES PISTONS
1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY 08701 PLATINUM SERIES PISTONS ULTRA LITE SMALL BLOCK CHEVROLET FORMULA-WON DESIGN FLAT T TOP & 14.5cc DISH 4" BORE 23 HEAD Super lightweight design Lateral gas ports
More informationWe Support the National Automotive Technicians Education Foundation. Contact us to learn about the Educational Institution Advantage Program.
everal years ago an alliance was formed to find a cost-efficient method to produce high-quality, technically-advanced, yet affordably-priced performance engine parts. A small group of professionals, with
More informationROCKER ARMS. Cutting Edge. Strength. Endurance
Cutting Edge Strength Endurance ROCKER ARMS Now COMP Cams introduces the two newest collections of roller tip rocker arms: The Ultra- Gold Aluminum Rockers and the Ultra Pro Magnum Rockers. ROCKER TECH
More informationPerformance Engine Bearings (Continued)
Performance Engine Bearings (Continued) Moly/Graphite Coated Rod Bearings Engine P Series H Series HD Series HK Series HX Series HDK Series HXK Series HXDK Series Ford (continued) 70-74 351C, 351CJ Rod
More information-.600" Short Standard Length or OE Hydraulic Roller Lifter Standard Length. .080" 5/16" 7.200" " Short.080" 5/16" 7.
Hi-Tech Pushrods - Listed By Application Prior to extensive research at COMP Cams, it was thought that the pushrod only had to be strong enough not to fail, bend or burn up at the ends. But engineers have
More informationPLATINUM SERIES PISTONS
1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY 08701 PLATINUM SERIES PISTONS LATE MODEL STOCK CHEVROLET FORMULA - WON DESIGN 4" BORE FLAT T TOP 23 HEAD Super lightweight design Lateral gas ports included
More informationLifters - Mechanical Roller
Mechanical Roller Lifters Crane roller lifters are the standard by which all others are judged. From our first horizontal locking bar version, with patented roller shield body, to our latest Ultra Pro-
More informationWrist Pins. Stocking Wris Pins. NEW! New Stocking 4130 Piston Pins 4130 CHROME MOLY. Ph:
Wrist Pins 4130 CHROME MOLY 4130 G-Series Piston Pins (CONTINUED) Wall G-7872250155* 88 0.827 G-8272500155 104 G-8662500155 111 0.875 G-8752500155* 112 0.905 G-9052500155 117 0.906 G-9062500155 118 0.905
More informationPUSHRODS. Precision. Consistency. Geometry
Precision Consistency Geometry As cam profiles get more aggressive and valve spring pressures increase, the importance of selecting the right pushrods has never been more critical. COMP Cams carries a
More informationVisit our website at
NATIONWIDE DISTRIBUTION CENTERS Alaska Anchorage 800-288-5573 Arizona Phoenix 888-272-0191 California Anaheim 800-634-0969 Los Angeles 800-995-0536 Oakland 800-234-1410 San Diego 800-995-2060 VT NH NJ
More informationalways the case, especially with springs produced by the OE manufacturers for production vehicles.
VALVE TRAIN About Valve Springs Valve Springs... Hardly An Open & Shut Subject! Valve springs are at least as important as any other major performance component in an engine; yet, they are probably the
More informationSee pg. 293 RPM POWER RANGE. Camshaft Series/ Grind Number LIFTERS *d
Pontiac V-8 55-81 265 (4.L)-287-01 (4.9L)-16-26-47-50- 70-89-400 (6.6L)-421-428-455 cu.in. Hydraulic Lifter Camshafts Brute low-end torque, smooth idle, daily usage, fuel economy, 1600-2200 cruise RPM,
More informationEngineering the Science of Geometry
Engineering the Science of Geometry Anatomy of a CROWER ROCKER Our 2024 aluminum bodies deliver maximum strength at operating temperature. Our lash adjusters are machined from aircraft quality Hi-temp
More informationMM HiFlo ST Engines. 4 Cylinder Engines - M10. 6 Cylinder Engines - M30. Baby Six Engines - M20
MM HiFlo ST Engines 4 Cylinder Engines - M10 2002, 320i, 318i 85-4 Cyl SOHC Engines 2200 Sport Engine... 155 HP... 6495 800 2200 Rally Engine... 160 HP... 6995 800 2300 Rally Engine... 165 HP... 7995 800
More informationintroduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide.
introduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide. In an effort to make servicing your V-Twin engine easier, the staff at Midwest Motorcycle Supply have put together what we believe
More informationBUILD YOUR OWN HIGH PERFORMANCE ENGINE
GUIDES AND KITS BUILD YOUR OWN HIGH PERFORMANCE ENGINE WHAT IS THE TOTAL POWER PACKAGE SYSTEM? To get great performance out of any engine, all of the components must work together. For over 30 years, the
More informationWORLD Products ~ 7301 Global Dr. ~ Louisville, KY ~ ~ worldproducts.net
World Products has been producing affordable high performance cast iron engine blocks and cylinder heads for twenty five years, beginning with a pioneering small block Chevrolet cylinder head and continually
More informationCOOLING SYSTEM & ACCESSORIES Aluminum Racing Radiators & Accessories Cooling System Accessories Electric Racing Water Pumps &
It may sound good in a catalog or brochure to use words like quality and affordability, but actually delivering on those promises is no easy task. In racing there is no hiding your products performance.
More informationQT-302FA FORD 302 MODIFIED 3.400" STROKE CHEVY RJ 5400CC* $ QT-302FB FORD 302 MODIFIED 3.250" STROKE 5400 $
ITEM NO. DESCRIPTION (PRICES ARE FREIGHT INCLUDED) ROD PRICE **Notice** All cast cranks are to be discontinued when sold out. NO RETURNS! Replace only for defective. CRANKSHAFT- NODULAR IRON 80-60-06 QT-526
More informationMM HiFlo ST Engines. M42 & M44 Engines. 4 Cylinder Engines - M10. 6 Cylinder Engines - M30. M50, M50tu, S50, M52 & S52 Engines. Baby Six Engines - M20
MM HiFlo ST Engines 4 Cylinder Engines - M10 2002, 320i, 318i 85-4 Cyl SOHC Engines 2200 Rally Engine... 160 HP... 7995 1000 2100 FI Engine... 12 lbs 275 HP... 8995 1000 2000-2200 Race Engines..210-240
More informationK-Motion Valve Springs are the choice of winning racers. K-Motion
K-Motion Valve Springs are the choice of winning racers. K-Motion Valve Springs deliver the highest quality along with the superior dependability that s needed to meet today s performance requirements.
More informationIGNITION ACCESSORIES COIL COVERS COIL BRACKET CHROME TOP HAT WIRE RETAINER CHROME PLATED VACUUM ADVANCE COVER SPARK PLUG BOOT INSULATORS 6012G
IGNITION ACCESSORIES COIL COVERS Chrome plated steel coil covers feature universal design to accept most stock coils. Includes chrome plated mounting bracket. Universal Coil Cover, horizontal mount...9777
More informationUNITED ENGINE & MACHINE CO. World Headquarters. Global Distribution Center COATING OPTIONS NOW AVAILABLE
800-648-7970 775-882-7790 Supplemental Piston Catalog 1 UNITED & MACHINE CO. Global Distribution Center United Engine & Machine Company 217 3rd Street Douglas, AZ 85607 Phone (520) 805-0051 Fax (520) 805-0572
More informationSTAINLESS VALVES HONDA / ACURA RACE MASTER VALVES MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Head Stem O / A Tip Underhea
Sport Compact Parts 2008 STAINLESS VALVES MITSUBISHI RACE FLO VALVES 3 XH-426 Stainless Exhaust Material 3 NK-842 Stainless Intake Material 3 Chrome Stems and Hard Tips 3 Swirl Polished and Fully Machined
More informationTABLE Of Contents. Welcome to Ferrea Page 3
TABLE Of Contents Welcome to Ferrea Page 3 Valve Tech Pages 6-9 Materials Page 6 Super FLO vs FLO Page 6 Valve Length Calculations Page 7 Production Page 8 General Guideline for Ferrea Valves Applications
More informationCylinder Head Comparison Sheet Big Block Mopar
Cylinder Head Comparison Sheet Big Block Mopar PowerPort Series Cylinder Heads for Big Block Mopar @.700" Valve Lift PowerPort 240 240cc Street 78cc -profiled 2.190" intake; 1.760" exhaust 334 cfm intake;
More information122 Fasola Road, Sequim Wa (360) Morgan +4 Engine Rebuild Brochure
122 Fasola Road, Sequim Wa 98382 (360) 582-9020 Morgan +4 Engine Rebuild Brochure This brochure is intended to show the extensiveness of the work performed on the TR engines that I rebuild. I treat each
More informationAcura K20 Roller Rocker. Valve Guides. Valve Locks
Competition Plus, 6000 Series and 5000 Series Valves In the Sport Compact market for more than 18 years Ferrea has been the leader in offering a specific valve for your specific application. The competition
More informationPERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS CATALOG #S
PERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS CATALOG #S 60619 60639 60659 60697 60715 60719 60735 60739 60759 60849 60859 60869 60879 60889
More informationModern Auto Tech Study Guide Chapters 13 & 14 Pages Engine Construction 52 Points
Modern Auto Tech Study Guide Chapters 13 & 14 Pages 182-216 Engine Construction 52 Points Automotive Service 1. The engine top end includes the cylinder, valve cover and intake & exhaust. Head, Manifolds
More informationTable of Contents. Sales Policies & Procedures We accept Visa or Master Card. Method of shipping is UPS and Fed-Ex.
World Products has been producing affordable high performance cast iron engine blocks and cylinder heads for over twenty five years, beginning with a pioneering small block Chevrolet cylinder head and
More informationQT-360 CHRYSLER " MAIN 4.00"STROKE STOCK OE ROD 6123 $ QT-455O OLDSMOBILE " MAIN 4.25" STROKE STOCK OE ROD 6735 $ 330.
ITEM NO. DESCRIPTION ROD PRICE ** Notice** All cast cranks are to be discontinued when sold out. Replace only for defectives! No returns. CRANKSHAFT- NODULAR IRON 80-60-06 QT-442 GMC 350 STOCK 3.480" STROKE
More informationPERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS
PERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS 60619 60639 60659 60697 60715 60719 60735 60739 60759 60849 Catalog #s 60859 60869 60879 60887
More informationRULE BOOK DISCLAIMER
RULE BOOK DISCLAIMER The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable requirements for such events. These
More informationGOOD BETTER BEST. AMERICAN MOTORS CORPORATION (AMC) I (2.5) center distance = 5.045
DUTY BILLET DBL ROLLER.250 TRUE ROLLER CHAIN AMERICAN MOTORS CORPORATION (AMC) I-4 250 (2.5) I-6 199, 232, 2 V-8 290 thru 401 center distance = 4.965 BUICK V-6 198, 225, 231 w/out Integral Distributor
More information2013 Senoia Raceway Rulebook
2013 Senoia Raceway Rulebook E-mail tech questions to: johnnywalls31@yahoo.com BOMBER RULES BODY 1. All bodies must be stock steel bodies. No fiberglass or aluminum body panels allowed. Fenders and quarter
More information2018 Pure Stock Rules. The rules listed below are being enforced for all drivers of the Pure Stock class to abide
2018 Pure Stock Rules The rules listed below are being enforced for all drivers of the Pure Stock class to abide by. For questions contact the race track or technical director. Contact information is listed
More informationLavonia Speedway 2018 Racing Season
Lavonia Speedway 2018 Racing Season Stock 4 Cylinder- (Window Safety Net & Mufflers are Mandatory) (*note 2 engine combinations*) BODY - A. Stock auto only B. May have complete aluminum body C. Inner panel
More informationFORD 351C, 351M-400M 8 CYL
SHAFTS SHAFTS HIGH ENERGY APPLICATION / SHAFTS TING SHAFT LIFT LOBE W/1.73 SEP. ANGLE HYDRAULIC-Excellent torque and mileage. Hyd. Hyd. 800 to 4800 32-218-3 252H 252 252 206 206.468.468 110 OEM replacement.
More information2018 PURE STOCK RULES
2018 PURE STOCK RULES PROTEST: 1. Engine Top $300 bottom $300 2. 602 Crate Engine $350 Top $400 Bottom 3. $100 per shock Claim Rule top three only 4. Tire Protest $100 (one tire) top three only 5. CRATE
More informationAdvanced Auto Tech. ASE A 1 Test Preparation Engine Upper End Theory & Service
Advanced Auto Tech ASE A 1 Test Preparation Engine Upper End Theory & Service Torque to yield bolts stretch to their yield point when tightened and should not be reused. True or False The sealing lip &
More informationTABLE OF CONTENTS Revised 7/5/12
1 TABLE OF CONTENTS Revised 7/5/12 Page 3, 4 & 5...Reaper Camshafts and Camshaft Gear Kits Page 6....... Econo Beehive Valve Spring Kits Page 7....... Endurance Beehive Valve Spring Kits Page 8........High
More information10295 Standard volume, high pressure oil pump.
4.8-A,C,V (294) OHV - 1999-15 - 8 Cyl. - 3.78 Bore GEN III Vortec Melling Performance Oil Pumps 10295 Standard volume, high pressure oil pump. Performance upgrade of the M295. +10 psi higher pressure than
More informationEdelbrock Total Power Package
DYNO-MATCHED PARTS FOR PROVEN PERFORMANCE WITH NO GUESSWORK Edelbrock Total Power Package System PROVEN PERFORMANCE WITH NO GUESSWORK To get great performance out of any engine, the components must work
More informationintroduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide.
introduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide. In an effort to make servicing your V-Twin engine easier, the staff at Midwest Motorcycle Supply have put together what we believe
More informationLIMITED LATE MODEL. A. Standard Dirt Style body required. A stock appearing nose is required.
LIMITED LATE MODEL BODY: A. Standard Dirt Style body required. A stock appearing nose is required. B. Schaeffer Oil Southern nationals Body rules apply. C. See tech inspector if you have any questions.
More informationNew SOLID ROLLER LIFTERS SOLID ROLLER LIFTERS. Elite Race Solid Roller Lifters. Elite Race Solid Roller Lifter Oiling Path
New Elite Race Solid Roller Lifters If you re looking for the ultimate lifter to withstand even the most demanding racing conditions, look no further. The COMP Cams Elite Race Solid Roller Lifters feature
More informationPERFORMANCE CATALOG. Rocker Arms Fuel Rail Kits Valve Train Stabilizers Lubricants Apparel & More!! MADE IN AMERICA AND PROUD OF IT!
PERFORMANCE CATALOG Rocker Arms Fuel Rail Kits Valve Train Stabilizers Lubricants Apparel & More!! MADE IN AMERICA AND PROUD OF IT! SHAFT MOUNT ROCKER ARMS STUD MOUNT ROCKER ARMS NEW ADJUSTABLE PEDESTAL
More informationLS CHEVROLET CNC-PORTED HEADS FOR EXTRA POWER!
LS CHEVROLET WARHAWK 15 ALUMINUM CYLINDER HEADS Clearly the industry s most efficient replacement for the LS1 cylinder head, World s 15 Warhawk casting deliver more power than other aftermarket heads in
More informationSuzuki B-King 1340 DOHC 16v
.460/.415 270 /268 245 /243 785/45 Performance profile designed to increase mid and upper end. Valve Spring Kit, Shortened Valve Guides, and Larger Diameter 31 mm Intake Followers. Check ALL clearances!
More informationCATALOG - VOLUME XXII
CATALOG - VOLUME XXII VISIT THE NEW CHECK OUT OUR NEW WEBSITE We ve recently revamped our website to make it easier to navigate and access content. Additionally, we ve added video to the site. Our goal
More informationManley Performance Products, Inc. Manley WestW MANLEY PERFORMANCE PRODUCTS, INC.
Manley Performance Products, Inc. 1960 Swarthmore Ave Lakewood, NJ 08701 Phone ( 732 ) 905-3366 Fax ( 732 ) 905-3010 East Coast Manufacturing Plant 9:00 AM - 5:30 PM EST Manley Performance Products, Inc.
More information165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster
165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster Head Torque---------------------------------------------65-70 Ft. Lbs. with 7/16 stud Pedestal Torque--------------------------------------------------25-30
More informationLIFTERS. Engineering. Durability. Power
Engineering Durability Power LIFTERS For years COMP Cams lifters have set the standard for solid roller lifter technology, but today s engine s place an even greater demand on lifters. With today s aggressive
More informationGENERAL MOTORS CORPORATE SECTION BUICK C.I. EVEN FIRE 6 CYL
BLANK PAGE SHAFTS GENERAL MOTORS CORPORATE SECTION BUICK 181-252 C.I. EVEN FIRE 6 CYL. 1978-1988 TING SHAFT LIFT W/1.55 HYDRAULIC-Excellent torque. Good Hyd. Hyd. 800 to 4200 69-115-4 240H 240 248 192
More informationCurrent Price List Jan 2013
Crankshafts Current Price List Jan 2013 Pearson Flywheel Assembly standard ⅞ T/S Shaft 1⅛ D/S Shaft, Carrillo Con-Rod balanced to your Piston. 88 Stroke for Gold Star Crankcases. Direct replacement. 800.00
More informationX E D N I T X CK E N BA
INDEX ENGINE BLOCKS CYLINDER HEADS INTAKE MANIFOLDS ACCESORIES SMALL BLOCK CHEVROLET: SMALL BLOCK CHEVROLET: SMALL BLOCK CHEVROLET: VALVE COVERS Motown Aluminum S/R Iron Motown STUD GIRDLES Motown II Iron
More informationPro Iron Small Block - Technical Notes
DART Pro Iron Small Block - Technical Notes Deck Height... 9.025" Bore... 4.00" or 4.125" unfinished Main Bearing Size... 350 (2.45") & 400 (2.65") Weight... 175 lbs Largest Recommended Bore... 4.165"
More informationL 2.460" 320 L L 2.430" 485 L 2.460" 400. Damper. Damper 1 + Damper
PERFORMANCE VALVE SPRING APPLICATION Crow Cams valve springs are made from aircraft quality alloy steels to give the best performance and reliability at a reasonable price. They are specially designed
More informationSuperior Design. Advanced Manufacturing. Proven Performance.
Superior Design. Advanced Manufacturing. Proven Performance. Trick Flow Specialties reputation was earned by creating, engineering, and manufacturing budget-friendly cylinder heads that deliver phenomenal
More informationMazda Mercedez Benz Mclaren Mini Cooper Mitsubishi Mopar Nissan Oldsmobile Olds Quad 4 Peugeot Pontiac
Over 45YEARS Of Experience For the past 45 years, Ferrea has been manufacturing hard core racing components for various types of engines in a wide range of categories worldwide. Our company uses the latest
More informationGeneral Engine Rules Common to all Makes:
NEEDMORE SPEEDWAY 2017 CRATE LATE MODEL ENGINE RULES Engine in car must match manufacturer of body used. Example: Ford Thunderbird must run Ford Engine: Camaro must use Chevy Engine: Dodge Intrepid must
More information2019 SK Modified Open Engine Rules Supplement
2019 SK Modified Open Engine Rules Supplement 20E- 5 GENERAL ENGINE REQUIREMENTS Engine must be OEM cast iron V8 production block, or the Dart SHP Block. Cylinder heads must be OEM or Dart 10024266, and
More informationCOMPANY PROFILE PRODUCTS
COMPANY PROFILE PRODUCTS Company Profile CFR Performance is a major automotive supplier and distributor of car and truck accessories. We are part of a family owned and operated tradition of automotive
More information3 Hyd. Hyd. 800 to H Hyd. Hyd. 800 to H
CAMSHAFTS CAMSHAFTS amc/jeep/chrysler american motors 199-258 c.i. 4.0l 6 cyl. 1964-1998 HYDRAULIC Our best cam for gas mileage. Strong low end torque. Good stock replacement with very smooth idle. (NOT
More informationSingle-Bolt Single-Bolt. Hyd. Hyd to Single-Bolt. Hyd. Hyd to Single-Bolt
CAMSHAFTS CAMSHAFTS CHRYSLER 8-440 C.I. 8 CYL. 1959-1980 high energy HYDRAULIC Excellent torque and mileage for 8-400 2 or 4 BBL. Smooth idle. Light towing, 9:1 compression. Good OEM upgrade. HYDRAULIC
More informationIron Small Block - Technical Notes
DART Iron Small Block - Technical Notes Deck Height... 9.025" Bore... 4.00" or 4.125" unfinished Main Bearing Size... 350 (2.45") Weight... 175 lbs Largest Recommended Bore... 4.165" Camshaft Bearing Diameter...
More informationMazda Mercedez Benz Mclaren Mini Cooper Mitsubishi Mopar Nissan Oldsmobile Olds Quad 4 Peugeot Pontiac
Over 45YEARS Of Experience For the past 45 years, Ferrea has been manufacturing hard core racing components for various types of engines in a wide range of categories worldwide. Our company uses the latest
More informationNew! RSF-1 Forged 1-Piece
17x4.5 15x10 New! RSF-1 Forged 1-Piece Forged from 6061-T6 aircraft aluminum in one piece No welds to leak, no bolts to loosen Hi-luster clear coat finish with gloss black accents for low maintenance Designed
More informationSHOVEL HEAD. Extreme Duty Replacement Valves Valves Guides Valves Seals. Compression Release Valves. Valves Spring kits SHOVEL HEAD
Extreme Duty Replacement Valves Valves Guides Valves Seals Valves Spring kits Compression Release Valves AV&V Extreme Duty Replacement Valves These superb valves feature the highest flow level on the market.
More informationCYLINDER HEAD OVERHAUL
ENGINE OVERHAUL PROCEDURES - GENERAL INFORMATION -2011 Mercedes-... Page 1 of 20 CYLINDER HEAD OVERHAUL * PLEASE READ THIS FIRST * Examples used in this article are general in nature and do not necessarily
More information2013 Catalog and Tech
2013 Catalog and Tech AMERICAN MADE FOR 70+ YEARS AND GOING STRONG! Hy-Lift Johnson Inc: We have been manufacturing lifters in Muskegon Michigan USA for over 70 years and some of our employees have been
More informationDURATION IN DEGREES LOBE LIFT DURATION IN DEGREES LOBE LIFT
NOSTALGIA PLUS SOLIDS Like the Nostalgia Plus Hydraulics, these lobes are designed to mimic the sound of the great engines of the past while improving performance by applying today's design techniques.
More informationDRIVER ELIGIBILITY GUIDELINES TO RACE CLASSES
SPORTSMAN RULES DRIVER ELIGIBILITY GUIDELINES TO RACE CLASSES Any DRIVER that has won a CRATE / Limited/ Super Late Model Feature event at Boyd's Speedway in 2017 cannot register to race in any class lower
More informationLIMITED SLIP DIFFERENTIALS MINI-SPOOLS SPOOLS
LIMITED SLIP DIFFERENTIALS MINI-SPOOLS SPOOLS The answer to faster and smoother torque transfer, at any speed, in any driving condition INNOVATION AT WORK From over the road daily driving to muddy trails
More information2017 PURE STOCK RULES
2017 PURE STOCK RULES PROTEST: 1. Engine Top $300 bottom $300 2. 602 Crate Engine $350 Top $400 Bottom 3. $100 per shock Claim Rule top three only 4. Tire Protest $100 (one tire) top three only ALL CARS
More informationRead all instructions before beginning machining or assembly.
A4 blocks now come with steel billet main caps only (all 5 are cross bolted. Aluminum replacement caps can be special ordered directly from Pro Gram Engineering phone (330) 745-1004. Head Studs: Head stud
More informationTIMING SETS. Balanced. Accuracy. Reliability
Balanced Accuracy Reliability TIMING SETS With a variety of timing sets and components that include double roller sets, adjustable and keyway adjustable sets, belt drives and timing covers, COMP Cams carries
More information2017 Senoia Raceway Rulebook Hobby Stock
All drivers must adhere to the general rules, in addition to the division specific rules set forth below. WARNING PLEASE READ All cars with replaced frame or frame rails must first be approved by Track
More informationFORD C.I. 6 CYL (7.808 DECK)
BLANK PAGE S FORD / LINCOLN / MERCURY CORPORATE SECTION FORD 2000-2300 OHC 4 CYL. 1971-1990 TING LIFT IN. EX. HYDRAULIC-Excellent torque and good Hyd. Hyd. 800 to 4800 70-115-5 240H 240 240 192 192.400.400
More informationdial Bore gauge set deck Bridges 6'' stainless steel Calipers rocker stud remover 6'' digital Calipers top dead Center stop
415 dial Bore gauge set Used for checking cylinder bores, but is also useful for checking connecting rod bores for size, straightness or taper. Accurate to.0005. 15052 Dial Bore Gauge Set deck Bridges
More informationThe Life of a Lifter, Part 2
Basics Series: The Life of a Lifter, Part 2 -Greg McConiga Last time we looked at some complicated dynamics and compared flats to rollers. Now for the hands-on. 6 FEATURE This off-the-shelf hydraulic lifter
More informationAUSTRALIAN SPORTS SEDAN ASSOCIATION NSW - CLASSIFIEDS
AUSTRALIAN SPORTS SEDAN ASSOCIATION NSW - CLASSIFIEDS CONTACT EMAIL PH: Billy bcetin@bigpond.net.au 0418 622 685 # ITEM NAME DETAILED DESCRIPTION PHOTO UNIT PRICE 1 Tyres Used Dunlop Slick Tyres. 1 race
More informationHyd. Hyd to H Hyd. Hyd to H
high energy APPLICATION / HYDRAULIC Ideal for family sedans. Good low end torque and economy, smooth idle. HYDRAULIC Excellent power for towing. Good performance with highway gears, smooth idle. Hyd. Hyd.
More informationHolden Camshaft Listings
Holden shaft Listings Crane s Holden V8 Holden V-8, 1969-87....................................................................... 2 Holden V-8, 1988-97.......................................................................
More informationEAST ALABAMA MOTOR SPEEDWAY 2018 HOBBY TECHNICAL RULES
**Rules new for 2018 will be highlighted in BLUE. **Last updated on 12-22-17. EAST ALABAMA MOTOR SPEEDWAY This division is open to any 1955 or newer sedan. NO station wagons, or pick up trucks. WEIGHT:
More information2018 Senoia Raceway Rulebook Limited Late Model
All drivers must adhere to the general rules, in addition to the division specific rules set forth below. Senoia Raceway Limited Late division allows four engine packages. A. 604 Crate Engine 2250lbs 8
More informationSpindle Mount Steel Wheel. Valve Stems WHEELS, TIRES & ACCESSORIES. 01
Steel Wheels Add beauty, performance, and the appeal of a custom look to your VW Sedan, Bus, or Buggy with these precision made heavy duty wide steel wheels. Wide rims accept larger tires, allowing more
More informationTH400(M40) 3L80 TH375 - TH475 3L80HD
A B C D 34 44 2008 Transtar Industries, Inc. No part of this work, including but not limited to the Part Numbers, may be reproduced or transmitted in any form or by any means, electronic or mechanical,
More information