3 Hyd. Hyd. 800 to H Hyd. Hyd. 800 to H
|
|
|
- Corey Sullivan
- 5 years ago
- Views:
Transcription
1 CAMSHAFTS CAMSHAFTS amc/jeep/chrysler american motors c.i. 4.0l 6 cyl HYDRAULIC Our best cam for gas mileage. Strong low end torque. Good stock replacement with very smooth idle. (NOT FOR FUEL INJECTION) RPM CAMSHAFT CAM DURATION LIFT LOBE Hyd. Hyd. 800 to H HYDRAULIC Excellent torque and throttle response. Good for towing. Smooth idle. HYDRAULIC Good power for Cherokees and Jeeps. Great for towing, 4WD and offroad. Smooth idle. Hyd. Hyd to H Hyd. Hyd to H xtreme 4x4 HYDRAULIC Excellent torque and throttle response, great stock replacement cam. (NOT FOR FUEL INJECTION) Hyd. Hyd. 800 to X4250H HYDRAULIC-Good torque and excellent midrange power. Best with lower gear ratios. HYDRAULIC Good mid to upper torque, needs increased compression, headers and gears. Hyd. Hyd to X4254H Hyd. Hyd to X4262H xtreme 4x4 (FUEL INJECTION) HYDRAULIC Excellent torque and throttle response, great upgrade for stock cam in fuel injected applications. Hyd. Hyd. 800 to X4250H RPM CAMSHAFT CAM DURATION LIFT LOBE HYDRAULIC Strong torque, excellent mileage for , has smooth idle, good for stock replacement. HYDRAULIC Good low end torque. Strong mid-range power. Excellent for towing or performance. Smooth idle in 04 and up. HYDRAULIC Great for mild daily driven street machines. Slightly rough idle, broad powerband. Use lower gears in Hyd. Hyd. 800 to H Hyd. Hyd to H Hyd. Hyd to H Except as noted, not legal for sale or use on pollution-controlled motor vehicles
2 KITS & COMPONENTS american motors c.i. 4.0l 6 cyl K-KIT SK-KIT CL-KIT RP-KIT LIFTERS TIMING (NOT FOR FUEL INJECTION) K SK CL N/A N/A N/A K SK CL N/A N/A N/A K SK CL N/A N/A N/A (NOT FOR FUEL INJECTION) STEEL RET. xtreme 4x4 AMC/JEEP/CHRYSLER K SK CL N/A N/A N/A K SK CL N/A N/A N/A K SK CL N/A N/A N/A (FUEL INJECTION) xtreme 4x4 K SK CL N/A N/A N/A K-KIT SK-KIT CL-KIT RP-KIT LIFTERS TIMING STEEL RET. K SK CL RPM , K SK CL RPM , K SK CL RPM , Footnotes: Master Footnote Index on page Requires screw-in studs & guide plates 4 Requires.150" longer pushrod 7 Stock springs cannot be used and later use.12" diameter valve with bead type locks 80 K-Kits will only work in models due to different valve stem diameters 96 Works in models only 97 Must use timing set #219 in 1999 and newer applications RED NUMBERS ARE THE PREMIUM CHOICE
3 CAMSHAFTS CAMSHAFTS MAGNUM HYDRAULIC Best cam for with stock converter. Works well with headers and aftermarket intake. Mild rough idle. HYDRAULIC Great street machine cam. Needs manifold, 2500 converter and lower gears. 9:1 compression. Rough idle. RPM CAMSHAFT CAM DURATION LIFT LOBE Hyd. Hyd to H Hyd. Hyd to H HYDRAULIC Street/strip cam for 60 and up. Use 10:1 compression with 000+ converter and low gears. Very rough idle. HYDRAULIC Excellent for Pro Street or mild bracket racing stall, 10.5:1 compression, 4.10 gear or lower. Radical idle. Hyd. Hyd to H Hyd. Hyd. 000 to H XTREME energy HYDRAULIC Strong torque thru low end and mid-range, good idle. Hyd. Hyd to XE256H HYDRAULIC Excellent response, good mid-range, noticeable idle. Hyd. Hyd to XE262H New HYDRAULIC Very strong mid-range and throttle response, stall. Rough Idle. THUMPR HYDRAULIC Thumpr High performance street, stock converter ok, best with converter and gears. Choppy/thumping idle. Hyd. Hyd to XE274H Hyd. Hyd to TH HYDRAULIC Mutha Thumpr High performance street/strip, needs 9:1 compression, stall, intake, gears and headers, rough idle. HYDRAULIC Big Mutha' Thumpr Street/ strip, needs 9.5:1 compression, stall, intake, gears and headers, very rough idle. Hyd. Hyd to TH Hyd. Hyd to TH Except as noted, not legal for sale or use on pollution-controlled motor vehicles
4 KITS & COMPONENTS K-KIT SK-KIT CL-KIT RP-KIT LIFTERS TIMING K SK CL RPM , K SK CL RPM , K SK CL RPM , K SK CL RPM , STEEL RET. MAGNUM XTREME energy AMC/JEEP/CHRYSLER K SK CL RPM , K SK CL RPM , K SK CL RPM , THUMPR K N/A CL RPM , K N/A CL RPM , K N/A CL RPM , Footnotes: Master Footnote Index on page Requires screw-in studs & guide plates 2 Requires machining on cylinder heads 4 Requires.150" longer pushrod 7 Stock springs cannot be used 7 Adjustable valve train required RED NUMBERS ARE THE PREMIUM CHOICE
5 CAMSHAFTS CAMSHAFTS american motors c.i. 8 cyl Hydraulic Flat Tappet Camshafts HYDRAULIC Best in heavy car with 500+ stall and 10:1+ compression. HYDRAULIC Our best racing hydraulic, stall or 4 speed with 11:1 compression. Mechanical Flat Tappet Camshafts SOLID Great for mid-range torque in a heavy car with a 4000 converter and 10.5:1 compression. RPM CAMSHAFT CAM DURATION LIFT LOBE Hyd. Hyd. 500 to H Hyd. Hyd to H to B SOLID Best in 60 or larger engine with a 5000 converter or a 4 speed and 11:1 compression. SOLID Bracket and mud racing. Works best with converter in 90 or larger engine to B to S mechanical roller Camshafts MECHANICAL ROLLER Bracket and super classes. Smooth profi le, easy on parts, use with 90+ and 5500 converter to AR Pro Plasma Nitriding Nitriding introduces nitrogen ions into steel or iron to improve initial and long-term wear characteristics. COMP offers some popular part numbered applications already nitrided see pages of this Master Catalog for a listing. If your application isn t listed, COMP Cams can nitride any fl at tappet cam that we offer, including custom grinds. Contact us at or camhelp@compcams.com Except as noted, not legal for sale or use on pollution-controlled motor vehicles
6 KITS & COMPONENTS LIFTERS TIMING , N/A N/A N/A , N/A N/A N/A , , american motors c.i. 8 cyl RETAINERS Hydraulic Flat Tappet Camshafts LASH CAPS REV. KIT Mechanical Flat Tappet Camshafts DIST. GEAR STUD GIRDLES N/A N/A N/A N/A N/A N/A AMC/JEEP/CHRYSLER , N/A N/A N/A Mechanical Roller Camshafts , N/A N/A N/A CamQuest 6 Cam Selection Software With the CamQuest 6 Cam Selection Software, users can answer a few application specifi c questions about engine/vehicle combinations and the program instantly provides the top matching COMP camshafts and related valve train components, cam spec card and projected horsepower and torque output. TWo WAyS To GeT your copy Download it FRee from the comp cams website at or purchase the camquest 6 promo package, including: camquest 6 on cd comp cams Racing T-Shirt (S-XXXL) Free Standard Ground Shipping in continental United States only $15 (#cq106-size) See Page 96 Footnotes: Master Footnote Index on page Requires screw-in studs & guide plates 2 Requires machining on cylinder heads 4 Requires.150" longer pushrod 5 Requires distributor gear upgrade 7 Adjustable valve train required RED NUMBERS ARE THE PREMIUM CHOICE
Hyd. Hyd to H Hyd. Hyd to H
high energy APPLICATION / HYDRAULIC Ideal for family sedans. Good low end torque and economy, smooth idle. HYDRAULIC Excellent power for towing. Good performance with highway gears, smooth idle. Hyd. Hyd.
ForD c.i. 8 cyl (includes 221, 260, 289 & 302) high energy Hydraulic Flat Tappet Camshafts Hydraulic Flat Tappet Camshafts
CAMSHAFTS CAMSHAFTS FORD 221-02 C.I. 8 CYL. 196-1995 (INCLUDES 221, 260, 289 & 02) high energy HYDRAULIC 289c.i. with automatic, stock gears. Good torque and economy, very smooth idle. HYDRAULIC Good for
Single-Bolt Single-Bolt. Hyd. Hyd to Single-Bolt. Hyd. Hyd to Single-Bolt
CAMSHAFTS CAMSHAFTS CHRYSLER 8-440 C.I. 8 CYL. 1959-1980 high energy HYDRAULIC Excellent torque and mileage for 8-400 2 or 4 BBL. Smooth idle. Light towing, 9:1 compression. Good OEM upgrade. HYDRAULIC
CHRYSLER TECH CHYRSLER TECH
CHRYSLER TECH Chrysler, one of the most dominant names during the early Muscle Car era, has developed five basic series of engines that are popular choices in racing, street performance and towing applications.
FORD 351C, 351M-400M 8 CYL
SHAFTS SHAFTS HIGH ENERGY APPLICATION / SHAFTS TING SHAFT LIFT LOBE W/1.73 SEP. ANGLE HYDRAULIC-Excellent torque and mileage. Hyd. Hyd. 800 to 4800 32-218-3 252H 252 252 206 206.468.468 110 OEM replacement.
gm ls gen iii/iv three-bolt 8 cyl present *see application chart on pages
CAMSHAFTS CAMSHAFTS gm ls gen iii/iv three-bolt 8 cyl. 1997-present *see application chart on pages 186-187 xfi rpm HYDRAULIC ROLLER Very strong torque, good mileage. Noticeable increase over stock cam.
FORD C.I. 6 CYL (7.808 DECK)
BLANK PAGE S FORD / LINCOLN / MERCURY CORPORATE SECTION FORD 2000-2300 OHC 4 CYL. 1971-1990 TING LIFT IN. EX. HYDRAULIC-Excellent torque and good Hyd. Hyd. 800 to 4800 70-115-5 240H 240 240 192 192.400.400
GENERAL MOTORS CORPORATE SECTION BUICK C.I. EVEN FIRE 6 CYL
BLANK PAGE SHAFTS GENERAL MOTORS CORPORATE SECTION BUICK 181-252 C.I. EVEN FIRE 6 CYL. 1978-1988 TING SHAFT LIFT W/1.55 HYDRAULIC-Excellent torque. Good Hyd. Hyd. 800 to 4200 69-115-4 240H 240 248 192
The Choice of Champions
Pioneering the Camshaft Industry Since 1945 2015 Camshafts, Valvetrain, Pistons, Connecting Rods, Crankshafts, Rotating Assemblies, and More! HOWARDScams The Choice of Champions Cams & Valvetrain......................
Holden Camshaft Listings
Holden shaft Listings Crane s Holden V8 Holden V-8, 1969-87....................................................................... 2 Holden V-8, 1988-97.......................................................................
Holden Camshaft Listings
Holden shaft Listings Crane s Holden V8 Holden V-8, 1969-87....................................................................... 6 Holden V-8, 1988-97.......................................................................
OVERHEAD CAM. CamQuest 6 Cam Selection Software. See Page 396
OVERHEAD CAM FORD MODULAR XTREME ENERGY 4.6 & 5.4L SOHC or DOHC These profiles are developed for use in Ford Modular engines. The.550" versions are more aggressive off the seat and have more area. The.500"
DURATION IN DEGREES LOBE LIFT DURATION IN DEGREES LOBE LIFT
NOSTALGIA PLUS SOLIDS Like the Nostalgia Plus Hydraulics, these lobes are designed to mimic the sound of the great engines of the past while improving performance by applying today's design techniques.
HIGH PERFORMANCE FORD MODULAR EDITION
FORD MODULAR EDITION WINTER 2014 FORD MODULAR EDITION Within these pages you ll find our best selling Ford Modular Parts for Professional Engine Builders. The Ford Modular engine is Ford s overhead camshaft
LOBE RATED DURATION IN LOBE TAPPET LIFT THEORETICAL VALVE 0 Lash CAMSHAFT TYPE NUMBER DURATION DEGREES TDC ROCKER ARM RATIO
A look into the COMP Cams Master Lobe Library Since 1977, COMP Cams main goal has been to be the best in camshaft design and technology. The techniques and ideas incorporated in our camshaft designs have
How it Began The CUSTOMER requested it I want one of them cams that goes Thumpety-Thump Thump The Sales guy sold it The Engineers figured out how to m
Thumpr Cam Development Goals, Methodology, & Results Brian Reese Competition Cams How it Began The CUSTOMER requested it I want one of them cams that goes Thumpety-Thump Thump The Sales guy sold it The
TABLE OF CONTENTS. Custom Camshafts Custom Camshafts Timing Components Timing Components
TABLE OF CONTENTS New Camshafts Late Model Hemi Camshafts...3 Modular Ford Camshafts...4 GM LS/Gen III Camshafts...5-8 AMC Camshafts...9 Chevrolet Small Block Camshafts...10-17 Pontiac Camshafts...18 Ford
See pg Camshaft PART NUMBER/ Emissions Code RPM POWER RANGE LIFTERS *
Chevrolet V-8 67-95 96-402-427-454 cu.in. CAMSHAFTS Application Mechanical Lifter Camshafts Excellent low end and mid range torque and HP, fair idle, moderate performance usage, bracket racing w/ heavy
Part Number MTO. Note: Early cid Odd Fire cam cores are available from Crower. Specify when ordering.
BAJA BEAST / Performance Level 2 Good hot street cam with emphasis on upper bottom to top end power. RPM Power Range: 1800 to 4500 / Redline: 6000 Plus. ULTRA PERFORMANCE Street/strip cam with strong mid
165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster
165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster Head Torque---------------------------------------------65-70 Ft. Lbs. with 7/16 stud Pedestal Torque--------------------------------------------------25-30
HOLDEN/CHEV LS1, LS2, LS6 ROCKER RATIO 1.70
HOLDEN/CHEV LS1, LS2, LS6 ROCKER RATIO 1.70 Adv. Duration.050 Duration Lift GEN3 LS 1999-ON 3 BOLT CATHEDERAL PORT HEADS Increased mid range min effect on economy STD idle (See Fitting note 1) Street cam,
HOT PERFORMANCE PARTS FOR 2006 NEW PRODUCTS CAM HELP
HOT PERFORMANCE PARTS FOR 2006 NEW PRODUCTS CAM HELP 1.800.999.0853 W W W. C O M P C A M S. C O M HOT PERFORMANCE PARTS FOR 2006 XFI HYDRAULIC ROLLER CAMSHAFTS Electronic Fuel Injected engines have very
ROCKER ARMS. Cutting Edge. Strength. Endurance
Cutting Edge Strength Endurance ROCKER ARMS Now COMP Cams introduces the two newest collections of roller tip rocker arms: The Ultra- Gold Aluminum Rockers and the Ultra Pro Magnum Rockers. ROCKER TECH
See pg. 293 RPM POWER RANGE. Camshaft Series/ Grind Number LIFTERS *d
Pontiac V-8 55-81 265 (4.L)-287-01 (4.9L)-16-26-47-50- 70-89-400 (6.6L)-421-428-455 cu.in. Hydraulic Lifter Camshafts Brute low-end torque, smooth idle, daily usage, fuel economy, 1600-2200 cruise RPM,
Visit our website at
EP 2012 NATIONWIDE DISTRIBUTION CENTERS PLUS 5 NEW Locations In Australia Alaska Anchorage 800-288-5573 Arizona Phoenix 888-272-0191 California Anaheim 800-634-0969 Los Angeles 800-995-0536 Oakland 800-234-1410
Machine work: Plano Machine determined the cylinders needed to be bored to (stock was ). This yields a new displacement of CID.
Introduction: During fall of 2007 the engine (~220k miles) developed a miss on one or more cylinders which became worse over a month or so. I pulled the engine December 2007 and determined that the intake
-.600" Short Standard Length or OE Hydraulic Roller Lifter Standard Length. .080" 5/16" 7.200" " Short.080" 5/16" 7.
Hi-Tech Pushrods - Listed By Application Prior to extensive research at COMP Cams, it was thought that the pushrod only had to be strong enough not to fail, bend or burn up at the ends. But engineers have
2 Phone: Fax: Who Are These Guys?
Who Are These Guys? Hughes Engines Inc. was formed in 1969 as Hughes Engineering, to build stock and super /stock cylinder heads for AHRA and NHRA class racing. Since then we have grown into a complete
This is my most popular Small Block Ford 347 Stroker Engine Combination
This is my most popular Small Block Ford 347 Stroker Engine Combination If you are trying to buy the most power with reliable parts for the least money, this is what I have come up with. The cast steel/iron
Camcraft Flat Tappet CAMSHAFTS
craft Flat Tappet CAMSHAFTS Hydraulic and Mechanical We are proud to introduce you to craft's flat tappet cam profiles. These are our own state of the art computer designs. craft has retained a world renown
New SOLID ROLLER LIFTERS SOLID ROLLER LIFTERS. Elite Race Solid Roller Lifters. Elite Race Solid Roller Lifter Oiling Path
New Elite Race Solid Roller Lifters If you re looking for the ultimate lifter to withstand even the most demanding racing conditions, look no further. The COMP Cams Elite Race Solid Roller Lifters feature
Lavonia Speedway 2018 Racing Season
Lavonia Speedway 2018 Racing Season Stock 4 Cylinder- (Window Safety Net & Mufflers are Mandatory) (*note 2 engine combinations*) BODY - A. Stock auto only B. May have complete aluminum body C. Inner panel
PUSHRODS. Precision. Consistency. Geometry
Precision Consistency Geometry As cam profiles get more aggressive and valve spring pressures increase, the importance of selecting the right pushrods has never been more critical. COMP Cams carries a
Short Block Contains. Long Block. Crankshaft Connecting Rods Pistons Camshaft Timing Gears. Same as short block plus. Cylinder heads Lifters Push Rods
Short Block Short Block Contains Crankshaft Connecting Rods Pistons Camshaft Timing Gears Long Block Same as short block plus Cylinder heads Lifters Push Rods Displacement Volume of all cylinders swept.
M-6007-Z363 Crate Engine Specifications and Owner's Manual
M-6007-Z363 Crate Engine Specifications and Owner's Manual!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. INSTALLATION INSTRUCTIONS: These instructions consist of (4)
STREET/RACE DISTRIBUTOR
Installation Instructions for STREET/RACE DISTRIBUTOR CAUTION: READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION INTRODUCTION The Crane Cams street/race distributor is a high precision system intended
General Engine Rules Common to all Makes:
NEEDMORE SPEEDWAY 2017 CRATE LATE MODEL ENGINE RULES Engine in car must match manufacturer of body used. Example: Ford Thunderbird must run Ford Engine: Camaro must use Chevy Engine: Dodge Intrepid must
Hi-Tech & Pro Magnum Roller Rocker Arms
Hi-Tech & Pro Magnum Roller Rocker Arms Thank you for choosing COMP Cams products; we are proud to be your manufacturer of choice. Please read this complete instruction sheet carefully (including the application
Precision Degree Wheel Kit
555-81621 Precision Degree Wheel Kit Instruction Booklet Instructions for 81621 Camshaft Degree Kit Thank you for purchasing the Jegs Camshaft Degree Kit. Please follow these detailed instructions to properly
always the case, especially with springs produced by the OE manufacturers for production vehicles.
VALVE TRAIN About Valve Springs Valve Springs... Hardly An Open & Shut Subject! Valve springs are at least as important as any other major performance component in an engine; yet, they are probably the
OIL PUMP 21mm 26mm 30mm 32mm Dry sump Plugged for full flow Maxi pump O ring Hard anodized Aluminum Cast iron
CASE Case material /Alloy Serial number Head stud 8mm 10mm Case savers Yes No Head stud material Length Crank bore depth Right Left Main bore diameter @ 25 ft lb Cam bore depth Right Left Right Cam thrust
2018 Bomber Rules. The rules listed below are now being enforced and are to be added into the rule book
2018 Bomber Rules The rules listed below are now being enforced and are to be added into the rule book for all drivers of the Bomber class to abide by. For questions contact the race track or the technical
Roller Camshaft Installation
Installation Instructions Roller Camshaft Installation For more information, see www.cranecams.com READ CAREFULLY AND COMPLETELY BEFORE INSTALLATION Prior to installation, immerse lifters in a premium
BUILD YOUR OWN HIGH PERFORMANCE ENGINE
GUIDES AND KITS BUILD YOUR OWN HIGH PERFORMANCE ENGINE WHAT IS THE TOTAL POWER PACKAGE SYSTEM? To get great performance out of any engine, all of the components must work together. For over 30 years, the
DRAFT VTS. Approved for Racing. Pontiac
DRAFT VTS Approved for Racing Vehicle Manufacturer: Year and Model: 2010 Solstice GXP Pontiac This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
PERFORMER-PLUS Camshaft/Lifters/Lube Kit CATALOG #2157 MODEL: c.i.d. Pontiac V8, 1965 & later
PERFORMER-PLUS Camshaft/Lifters/Lube Kit CATALOG #2157 MODEL: 350-455 c.i.d. Pontiac V8, 1965 & later CAMSHAFT: Edelbrock Performer-Plus camshafts are ground specifically for use with the corresponding
Porsche 911 SOHC 12v
.520/.495 302 /294 282 /268 501/502 Race profile for large displacement racing engines. Price Per Set (2). N/A 05-491 05-492.515/.492 304 /294 282 /272 171i/171e Schrick Race Profile Price Per Set (2).
INSTALLATION INSTRUCTIONS
PERFORMER RPM CAMSHAFT / LIFTERS / LUBE KIT For 343-401 c.i.d. AMC V8 Engines CATALOG # 7132 INSTALLATION INSTRUCTIONS PLEASE study these instructions carefully before beginning this installation. Most
PERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS CATALOG #S
PERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS CATALOG #S 60619 60639 60659 60697 60715 60719 60735 60739 60759 60849 60859 60869 60879 60889
About. Some facts about us..
About Some facts about us.. Kelford Cams was established in 1968 in Christchurch, New Zealand. The Kelford name comes from the two founding owners Norm Kelly and Ron Rutherford. Today the company is still
About. Some facts about us..
About Some facts about us.. Kelford Cams was established in 1968 in. The Kelford name comes from the two founding owners Norm Kelly and Ron Rutherford. Today the company is still privately owned but has
2018 TOCCOA RACEWAY. Stock 4 Cyl. (Window Safety Net & Mufflers are Mandatory)
Stock 4 Cyl (Window Safety Net & Mufflers are Mandatory) Fuel: A) 110 Track Fuel B) NO OXYGENATED FUELS C) NO E85 Body: 2018 TOCCOA RACEWAY A) Any two or four door foreign or domestic car with a 94-101.5
Edelbrock Total Power Package
DYNO-MATCHED PARTS FOR PROVEN PERFORMANCE WITH NO GUESSWORK Edelbrock Total Power Package System PROVEN PERFORMANCE WITH NO GUESSWORK To get great performance out of any engine, the components must work
CAM LOBE PROFILE CATALOG AN EXPANDED LISTING OF ALL CRANE CAMS LOBE PROFILES FOR PROFESSIONAL RACING ENGINE BUILDERS
CAM LOBE PROFILE CATALOG AN EXPANDED LISTING OF ALL CRANE CAMS LOBE PROFILES FOR PROFESSIONAL RACING ENGINE BUILDERS CAM LOBE PROFILE CATALOG CONTENTS Lobe Selection, Ordering and Services 2 6 Hydraulic
PERFORMER RPM Camshaft/Lifters/Lube Kit CATALOG #7112 MODEL: c.i.d. Oldsmobile V8, 1967 & later
PERFORMER RPM Camshaft/Lifters/Lube Kit MODEL: 330-350-403 c.i.d. Oldsmobile V8, 1967 & later PLEASE study these instructions carefully before installing your new camshaft. If you have any questions or
Pushrod Accessories & Rev Kits
Pushrod Accessories & Rev Kits PUSHROD GUIDE PLATES Crower s pushrod guide plates are specially hardened for added strength and durability. They are positioned on the rocker arm studs to guarantee proper
INDEX FAX #: TEL # :
INDEX COMPANY HISTORY...3 POLARIS CAMS AND KITS Polaris Victory Camshafts ( 98-2001)...5 Polaris Freedom Camshafts (2002-up)...5 TWIN 88 CAMSHAFTS Sprockets, Valve Springs, Collars, Pushrods...6 Chain
TECH. If you liked our Danger Mouse and Major Mouse series of articles, you re gonna love this one.
TECH Here Comes Modern Mouse! Following in the immortal footsteps of both Major Mouse and Danger Mouse is none other than Modern Mouse. Here Comes Modern Mouse! If you liked our Danger Mouse and Major
PERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS
PERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS 60619 60639 60659 60697 60715 60719 60735 60739 60759 60849 Catalog #s 60859 60869 60879 60887
For For more information, see
Crane Sportsman Shaft-Mount Rocker Arms are designed for serious Sportsman and Professional racers. This system was designed to take advantage of the latest developments in advanced composite materials
For more information, see
Crane Sportsman Shaft-Mount Rocker Arms are designed for serious Sportsman and Professional racers. This system was designed to take advantage of the latest developments in advanced composite materials
Section 1 Evolution Motor. Twin Cam 1-44
Twin Cam 1-44 Cam Cover... 19-22 Cams... 3-14 Colony Hardware... 41-42 Cylinder Kits...23-26 Flywheel... 15-16 Gaskets... 43-44 Oil Pump...20 Pushrods/Covers....29-31 Pistons... 23-27 Rocker Arms & Covers...37-40
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF FORD RACING PERFORMANCE PARTS. STOP! READ THIS!
STOP! READ THIS! THIS ENGINE REQUIRES RACING OIL THAT CONTAINS 1200 PPM (parts per million) ZDDP (zinc-dialkyl-dithio-phosphate). THIS ENGINE IS SHIPPED WITHOUT OIL! Page 1 of 6 Please contact the Tech
2013 Senoia Raceway Rulebook
2013 Senoia Raceway Rulebook E-mail tech questions to: johnnywalls31@yahoo.com BOMBER RULES BODY 1. All bodies must be stock steel bodies. No fiberglass or aluminum body panels allowed. Fenders and quarter
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF FORD RACING PERFORMANCE PARTS.
Please visit www.fordracingparts.com for the most current instruction information!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE
2007 WORLD CHALLENGE SEASON
2007 WORLD CHALLENGE SEASON VEHICLE MANUFACTURER: YEAR & MODEL: BMW E46 325i and Ci This specifications form was developed by SCCA Pro Racing and will be used by the Series Technical Administrator to establish
Ford 4.6L (2V) SPECIFICATIONS
Ford 4.6L (2V) SPECIFICATIONS General Specifications Item Specifications Silicone Gasket and Sealant F7AZ-19554-EA WSE-M4G323-A4 Premium Engine Coolant VC-4A, VC-5 in Oregon, CXC-10 in Canada ESE-M97B44-A
(936)
The M-90 ECM is the latest in high tech, high performance engine controls. The M-90 is bringing the newest technologies to the table including Drive by Wire (DBW), Variable Valve Timing, Wideband Knock,
2018 PURE STOCK RULES
2018 PURE STOCK RULES PROTEST: 1. Engine Top $300 bottom $300 2. 602 Crate Engine $350 Top $400 Bottom 3. $100 per shock Claim Rule top three only 4. Tire Protest $100 (one tire) top three only 5. CRATE
LIFTERS. Engineering. Durability. Power
Engineering Durability Power LIFTERS For years COMP Cams lifters have set the standard for solid roller lifter technology, but today s engine s place an even greater demand on lifters. With today s aggressive
World Formula TECH MANUAL
World Formula TECH MANUAL Section 1 General Rules 1. Only stock Briggs & Stratton World Formula Model # 124435-8101 will be used in this class except as provided in this Tech manual. All parts will be
M-6007-Z351SR Sealed Crate Engine INSTRUCTION SHEET
Please visit www.fordracingparts.com for the most current instruction information!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE
TIMING SETS. Balanced. Accuracy. Reliability
Balanced Accuracy Reliability TIMING SETS With a variety of timing sets and components that include double roller sets, adjustable and keyway adjustable sets, belt drives and timing covers, COMP Cams carries
2017 Thunder Series 602 Thunder Series Rules
2017 Thunder Series 602 Thunder Series Rules Chassis: 1. Must follow FASTRAK rules. 2. Chassis must be built prior to 2014 Body: 1. Must follow FASTRAK body rules 2. 8 spoiler permitted 3. No 12 side braces
PERFORMER-PLUS CAMSHAFT / LIFTERS / LUBE KIT MODEL: 351-M/400 c.i.d. Ford V8 CATALOG #2172 INSTALLATION INSTRUCTIONS
PERFORMER-PLUS CAMSHAFT / LIFTERS / LUBE KIT MODEL: 351-M/400 c.i.d. Ford V8 INSTALLATION INSTRUCTIONS Please study these instructions carefully before installing your new camshaft. If you have any questions
Lifters - Mechanical Roller
Mechanical Roller Lifters Crane roller lifters are the standard by which all others are judged. From our first horizontal locking bar version, with patented roller shield body, to our latest Ultra Pro-
DRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Mazda Year and Model: 20 MX5 This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle. If a specification
Willhoit Auto Restoration DYNO TESTS
Willhoit Auto Restoration DYNO TESTS The dyno tests on these pages are the result of several years of testing. Below is a sample of the original data as it is printed from the DTS dyno computer, but most
PERFORMER RPM Camshaft/Lifters/Lube Kit CATALOG #7102 MODEL: c.i.d. Chevrolet V8, 1957 & later
PERFORMER RPM Camshaft/Lifters/Lube Kit CATALOG #7102 MODEL: 262-400 c.i.d. Chevrolet V8, 1957 & later CAMSHAFT: Edelbrock Performer RPM camshafts are ground specifically for use with the corresponding
MAGNETOS SUPER MAG SERIES MAGNETOS
SUPER MAG SERIES MAGNETOS 3536544 28900A SUPER-MAG III and SUPER MAG IV Designed specifically for use in Monster Trucks, Tractor Pulling, drag racing and other short duration motorsports applications,
HIGH VELOCITY HEADS PRODUCT CATALOG
HIGH VELOCITY HEADS PRODUCT CATALOG Over 45 years experience of cylinder head porting & design, intake manifold porting & design, AND carburetor spacer design. 6 14 16 SuperSuckers Cylinder Heads Manifolds
R-Series Cylinder Heads for Big Block Chevy
Overview Material TFS-41400004 A356-T6 Combustion Chamber Intake Port Exhaust Port Sizes 122cc 340cc 137cc 2.25 in. Intake, Springs 1.530 in. Dual Springs for Mechanical Flat Tappet and Hydraulic Locks
INDEX MADE IN USA YOUR CUSTOMER NO:
INDEX COMPANY HISTORY... 3 CAMSHAFTS - Twin Cam Engines All 07- up: Twins and 06 Dyna: Roller Chain Camshafts... 4 1999-2006: Roller Chain Conversion Camshafts... 5 All 07-up: Gear Drive Cam Installation
TECHNICAL ARTICLE SERIES GLOSSARY OF CAMSHAFT RELATED TERMS
TECHNICAL ARTICLE SERIES GLOSSARY OF CAMSHAFT RELATED TERMS Updated April 2016 A ABDC: After Bottom Dead Centre. ATDC: After Top Dead Centre. B BASE CIRCLE: The base of the cam lobe that is round and concentric
Crisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Super Street Class
Crisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Super Street Class Page 1 of 6 2017 Super Street Rules Vehicle 1. Any 1960 or newer sedan. 2. Chassis and suspension must remain completely
Banks Truck Pull Rules
Banks Truck Pull Rules A. Stock 2wd under 5,000 lbs. B. Stock 4wd under 5,000 lbs. C. Stock 4wd small block under 6,000 lbs. D. Stock 4wd big block under 6,000 lbs. E. Super stock 2wd under 4,000 lbs.
DRAFT VTS. Approved for Racing ASTON MARTIN
DRAFT VTS Approved for Racing Vehicle Manufacturer: ASTON MARTIN Year and Model: 2013 V12 VANTAGE This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the
QF PERFORMANCE CATALOG
QF17-07 2017 PERFORMANCE CATALOG www.qualcast.com www.ymme.biz QualFast Table Of Contents Component (Prefix) Page Street Performance Valves (53-)... 1 Racing Valves (12-)... 3 Sport Compact High Performance
2019 SK Modified Open Engine Rules Supplement
2019 SK Modified Open Engine Rules Supplement 20E- 5 GENERAL ENGINE REQUIREMENTS Engine must be OEM cast iron V8 production block, or the Dart SHP Block. Cylinder heads must be OEM or Dart 10024266, and
WORLD Products ~ 7301 Global Dr. ~ Louisville, KY ~ ~ worldproducts.net
World Products has been producing affordable high performance cast iron engine blocks and cylinder heads for twenty five years, beginning with a pioneering small block Chevrolet cylinder head and continually
2018 Junior Sprint Rules
2018 KidSprint Engine Rules Briggs World Formula 2018B All parts must be Briggs & Stratton factory production parts unless otherwise noted in these rules. No machining, polishing or alteration of any parts
Heat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under 7500 rpm
PUSHRODS Small Block Chevrolet Swedged End Pushrods.080 Wall 1010 Steel Heat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under
Performer-Plus 5.0L Hydraulic Roller Lifter Camshaft only CATALOG #3722 MODEL: 5.0 Litre Ford V8, 1985 & later INSTRUCTIONS
Performer-Plus 5.0L Hydraulic Roller Lifter Camshaft only CATALOG #3722 MODEL: 5.0 Litre Ford V8, 1985 & later INSTRUCTIONS PLEASE study these instructions carefully before installing your new camshaft.
122 Fasola Road, Sequim Wa (360) Morgan +4 Engine Rebuild Brochure
122 Fasola Road, Sequim Wa 98382 (360) 582-9020 Morgan +4 Engine Rebuild Brochure This brochure is intended to show the extensiveness of the work performed on the TR engines that I rebuild. I treat each
Performance Motorcycle Products
Performance Motorcycle Products for Harley-Davidson Motorcycles Chris Rivas and the worlds first 200 mph bagger. See Chris Rivas Rocket Cams on Page 8 Crane Cams has been recognized as a recipient of the
DRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Acura Year and Model: TSX (2004-2008) This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
2006 WORLD CHALLENGE SEASON
2006 WORLD CHALLENGE SEASON VEHICLE MANUFACTURER: YEAR & MODEL: Chevrolet (2005-) C6 / Z06 Corvette This specifications form was developed by SCCA Pro Racing and will be used by the Series Technical Administrator
2019 Road Warriors. Shock claim rule will be $50. Any driver finishing in the top 3 may claim shocks from any car finishing in the top 3.
2019 Road Warriors Protest $350 top end/ $400 bottom end any engine combination Crate engine claim rule will be $3900. Any car finishing on the lead lap may claim any engine that finishes on the lead lap.
M-6007-B50/B51/XE3/XB3 Engine INSTALLATION INSTRUCTIONS
Please visit www.fordracingparts.com for the most current instruction information!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE
2007 WORLD CHALLENGE SEASON
2007 WORLD CHALLENGE SEASON VEHICLE MANUFACTURER: YEAR & MODEL: Dodge (05-07) Viper Competition Coupe (Full Prep) This specifications form was developed by SCCA Pro Racing and will be used by the Series