PLATINUM SERIES PISTONS
|
|
- David Bailey
- 6 years ago
- Views:
Transcription
1 1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY PLATINUM SERIES PISTONS ULTRA LITE SMALL BLOCK CHEVROLET FORMULA-WON DESIGN FLAT T TOP & 14.5cc DISH 4" BORE 23 HEAD Super lightweight design Lateral gas ports included Round wire locks included Tool steel pin integral to design.043 x.043" x 3 mm RINGS " 5.700" FLAT T TOP 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" " 5.700" 14.5cc DISH 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" Top:.160" 2nd:.165" Oil:.145" Dome Volume: -2.0 cc Flat Top or -14.5cc Dish Compression Ratio: Flat Top: 10.34:1 w/ 64 cc & 3.48" Stroke Dish: 9.04:1 w/ 64 cc & 3.48" Stroke.043",.155" down Second Ring:.043" 3 mm Deck Thickness:.155" Valve Notches: Flat Top:.220" Int.,.150" Exh cc Dish:.300" Int.,.215" Exh. Maximum Fly Cut:.310" Int.,.190" Exh. Max. Valve Sizes: 2.100" Int., 1.625" Exh. Valve Angle: 22 Pin Included: tool steel P/N (.095" wall, 72 grams, 2.300" long ) Round Wire Locks: P/N " wide Piston Clearance:.005" measured 1.100" from bottom of the oil ring.043 Gas Ported 87
2 PLATINUM SERIES PISTONS SMALL BLOCK CHEVROLET 2 BARREL CLASS 4" BORE FLAT T TOP 23 HEAD 2.300" length tool steel pin included - integral to the piston design :.155" thick deck Spiral locks included - NO CHARGE Semi-banded skirt for improved skirt stability 1/16" x 3/16" Top:.183" 2nd:.183" Oil:.183".043" x 3mm Top:.160" 2nd:.165" Oil:.145" Dome Volume: -2.5 cc Compression Ratio: 10.34:1 w/ 64 cc & 3.48" Stroke 1/16" or.043" Gas Ported,.155" down Second Ring: 1/16" or.043" 3/16" or 3 mm Deck Thickness:.155" Valve Notches:.210" Int.,.150" Exh. Maximum Fly Cut:.270" Int.,.170" Exh. Max. Valve Sizes: 2.100" Int., 1.625" Exh. Valve Angle: 22 Pin Included: tool steel P/N (.095" wall, 74 grams, 2.300" long ) Spiral Locks: P/N " wide Piston Clearance:.005" measured 1.100" from bottom of the oil ring MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: /16" x 1/16" x 3/16" RINGS " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" The following pistons will include groove lock spacer " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" Gas Ported.043" x.043" x 3 mm RINGS " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" The following pistons will include groove lock spacer " 6.200" 3.480"/3.500" 1.050" " 6.200" 3.480"/3.500" 1.050" " 6.200" 3.480"/3.500" 1.050" Gas Ported 88
3 1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY PLATINUM SERIES PISTONS SMALL BLOCK CHEVROLET 4 BARREL CLASS 4" BORE FLAT T TOP 23 HEAD 1/16" x 1/16" x 3/16" RINGS Slightly thicker deck (.185" ) for higher horsepower applications 2.300" length tool steel pin included - integral to the piston design Spiral locks included - NO CHARGE Full banded skirt design for increased skirt stability " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.750" 1.425" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" The following pisons will include groove lock spacer " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" Top:.183" 2nd:.183" Oil:.183" Dome Volume: -4.0 cc Compression Ratio: 10.16:1 w/ 64 cc & 3.48" Stroke 1/16",.185" down Second Ring: 1/16" 3/16" Deck Thickness:.185" Valve Notches:.300" Int.,.190" Exh. Maximum Fly Cut:.360" Int.,.260" Exh. Max. Valve Sizes: 2.100" Int., 1.600" Exh. Valve Angle: 22 Pin Included: tool steel P/N (.130" wall, 96 grams, 2.300" long ) Spiral Locks: P/N " wide Piston Clearance: 005" measured 1.100" from bottom of the oil ring 89
4 SPORTSMASTER PISTONS MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: SMALL BLOCK CHEVROLET 4" BORE 23 HEAD FLAT T TOP MS-75 high silicon material Famous Manley skirt profile for smooth cylinder wall compatability Compression Part No. Bore Size Application Rod Length Stroke Distance Weight Ring Set " 4" SB Chevy 5.700" 3.480" 1.560" " 4" SB Chevy 5.700" 3.480" 1.560" " 4" SB Chevy 5.700" 3.480" 1.560" Above pistons also fit engines with 3.750" stroke and 5.565" 400 type connecting rods " 4" SB Chevy 6.000" 3.480" 1.260" " 4" SB Chevy 6.000" 3.480" 1.260" " 4" SB Chevy 6.000" 3.480" 1.260" " 4" SB Chevy 5.700" 3.750" 1.425" The following pistons will include groove lock spacer " 4" SB Chevy 6.000" 3.750" 1.125" Top:.183" 2nd:.183" Oil:.183" CUSTOM VERSIONS OF SPORTSMASTER TSMASTER PISTONS ARE AVA AILABLE Blank Forging Wrist Part No. Bore Range Description Valve Angle Pin Length " " SB Chevy & Ford Flat Top " Dome Volume: -3.5 cc Compression Ratio: 10:1 w/ 64 cc & 3.48" Stroke 1/16",.175" down Second Ring: 1/16" 3/16" Valve Notches:.240" Int..230" Exh. Maximum Fly Cut:.300" Int.,.280" Exh. Max. Valve Sizes: 2.080" Int., 1.600" Exh. Valve Angle: 22 Pin Included: P/N w/.150" wall Spiral Locks: P/N " wide Piston Clearance:.005" measured 1.100" from bottom of the oil ring 90
5 1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY PLATINUM SERIES PISTONS SMALL BLOCK CHEVROLET LS-1 / LS-6 FLAT T TOP & 8cc DISH 2.300" X.130" wall tool steel pin included - integral to the piston design Offset wrist pin design Pistons are machined for reluctor wheel clearance Spiral locks included - NO CHARGE 1.5, 1.5, 3mm ring package Other features include forced pin oiling, pressure balance groove and precision pin fitting Compression Pin Piston Piston & Pin Piston Part No. Bore Size Rod Length Stroke Distance Diameter Wt / Gms Wt / Gms Ring Set 5.7 Liter LS-1 Block: 3.898" Standard Bore FLAT TOP " 6.098" 3.622" 1.340" 24mm/ " 6.125" 3.622" 1.313" " 6.125" 4.000" 1.125" Liter LS-1 Block: 4.000" Standard Bore FLAT TOP " 6.125" 3.622" 1.313" " 6.125" 3.622" 1.313" " 6.125" 4.000" 1.125" " 6.125" 4.000" 1.125" " 6.125" 4.000" 1.125" Liter LS-1 Block: 4.000" Standard Bore -8cc DISH " 6.125" 4.000" 1.125" " 6.125" 4.000" 1.125" " 6.125" 4.000" 1.125" Top:.151" 2nd:.168" Oil:.136" 1.5 mm,.200" down Second Ring: 1.5 mm 3 mm Deck Thickness:.180" Valve Notches:.175" Int.,.150" Exh. Maximum Fly Cut:.230" Int.,.210" Exh. Max. Valve Sizes: 2.080" Int., 1.600" Exh. Valve Angle: 15 Pin Included: tool steel (.130" wall, 2.300" long ) Spiral Locks: P/N " wide Piston Clearance:.005" measured 1.100" from bottom of the oil ring COMPRESSION RATIO CHART with 66cc CYLINDER HEAD* Bore Stroke -2cc Flat Top -8cc Dish : : :1 10.9: : :1 11.0: : :1 11.2:1 Compression ratios are calculated at.010 (positive) deck clearance, a deck height, and a.054" thick compressed head gasket. 91
6 PLATINUM SERIES PISTONS BIG BLOCK CHEVROLET BORE FLAT T TOP Full banded skirt for increased skirt stability Tool steel pin included Spiral locks included Pin fitting included Suitable for superchargers, turbos, nitrous MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Compression Piston Dome Piston Part No. Bore Size Rod Length Stroke Distance Wt / Gms Volume Ring Set " 6.135" 4.000" 1.645" cc " 6.135" 4.000" 1.645" cc " 6.135" 4.000" 1.645" cc " 6.135" 4.000" 1.645" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc Top:.200" 2nd:.200" Oil:.170" 1/16",.350" down Second Ring: 1/16" 3/16" Intake Valve Notch:.300 Exhaust Valve: Pin Included: tool steel P/N (.180" wall, 170 grams, 2.930" long,.990 dia.) Spiral Locks: P/N " wide (4 per piston) Piston Clearance:.006" measured 1.100" from bottom of the oil ring COMPRESSION RATIO CHART Bore Stroke 112 cc 118 cc 124 cc :1 8.7:1 8.4: :1 8.8:1 8.5: :1 8.9:1 8.6: :1 9.0:1 8.7: :1 9.2:1 8.8: :1 9.3:1 8.9: :1 9.4:1 9.0: :1 9.5:1 9.1:1 All compression ratios are calculated at.010 deck clearance. Pistons with and compression distances REQUIRE and are shipped with groove lock spacers. 92
7 1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY PLATINUM SERIES PISTONS BIG BLOCK CHEVROLET INVERTED DOME Full banded skirt for increased skirt stability Tool steel pin included Spiral locks included Pin fitting included Suitable for superchargers, turbos, nitrous Compression Piston Dome Piston Part No. Bore Size Rod Length Stroke Distance Wt / Gms Volume Ring Set " 6.135" 4.000" 1.645" cc " 6.135" 4.000" 1.645" cc " 6.135" 4.000" 1.645" cc " 6.135" 4.000" 1.645" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc Top:.200" 2nd:.200" Oil:.170" 1/16",.350" down Second Ring: 1/16" 3/16" Intake Valve Notch:.300 Exhaust Valve: Pin Included: tool steel P/N (.180" wall, 170 grams, 2.930" long,.990 dia.) Spiral Locks: P/N " wide (4 per piston) Piston Clearance:.006" measured 1.100" from bottom of the oil ring COMPRESSION RATIO CHART Bore Stroke 112 cc 118 cc 124 cc :1 8.3:1 8.0: :1 8.4:1 8.1: :1 8.5:1 8.2: :1 8.6:1 8.3: :1 8.3:1 8.0: :1 8.4:1 8.1: :1 8.5:1 8.2: :1 8.6:1 8.3:1 All compression ratios are calculated at.010 deck clearance. Pistons with and compression distances REQUIRE and are shipped with groove lock spacers. 93
8 PLATINUM SERIES PISTONS BIG BLOCK CHEVROLET BORE HOLLOW DOME Perfect for drag race applications Exact ring groove to skirt squareness Full banded skirt design for increased skirt stability MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Compression Piston Dome Piston Part No. Bore Size Rod Length Stroke Distance Wt / Gms Volume Ring Set " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.535" 4.000" 1.245" cc " 6.535" 4.000" 1.245" cc " 6.535" 4.000" 1.245" cc " 6.535" 4.000" 1.245" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.535" 4.250" 1.120" cc " 6.535" 4.250" 1.120" cc " 6.535" 4.250" 1.120" cc " 6.535" 4.250" 1.120" cc Top:.200" 2nd:.200" Oil:.170" 1/16",.300" down except on CD is.270 down Second Ring: 1/16" 3/16" Intake Valve Notch:.300 Exhaust Valve: Pin Included: tool steel P/N (.150" wall, 147 grams, 2.930" long,.990 dia.) Spiral Locks: P/N " wide (4 per piston) Piston Clearance:.006" measured 1.100" from bottom of the oil ring COMPRESSION RATIO CHART Bore Stroke 112 cc 118 cc 124 cc :1 13.4:1 12.6: :1 13.6:1 12.8: :1 13.7:1 12.9: :1 14.0:1 13.1: :1 14.2:1 13.3: :1 14.4:1 13.5: :1 14.6:1 13.6: :1 14.8:1 13.8:1 All compression ratios are calculated at.010 deck clearance. Pistons with and shorter compression distances REQUIRE and are shipped with groove lock spacers. 94
9 1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY PLATINUM SERIES PISTONS FORD 4.6L (3 VALV ALVE) 6.5 cc DISH PISTON 1.2 mm offset wrist pin location for quiet start-ups. Mimics OEM design 2.500" length tool steel pin included Round wire locks included - NO CHARGE Full banded skirt design for increased skirt stability " 5.933" 3.543" 1.220" " 5.933" 3.543" 1.220" " 5.933" 3.543" 1.220" The root diameter of the ring grooves accomodates Manley rings and others which have the following radial thicknes Top:.162" 2nd:.152" Oil:.145" Dome Volume: -6.5 cc Compression Ratio: 09.6 : 1 w/ 51.1 cc & 3.543" Stroke Deck Thickness:.185" 1.5 mm,.220" down Second Ring: 1.5 mm 3 mm Pin Included: tool steel P/N (.120" wall, 88 grams, 2.500" long ) Round Wire Locks: P/N " wide Piston Clearance:.0035" measured 1.100" from bottom of the oil ring FORD 4.6L and 5.4L SOHC and DOHC (2 & 4 VALV ALVE) FLAT T TOP PISTONS 2.500" length tool steel pin included Round wire locks included - NO CHARGE Full banded skirt design for increased skirt stability " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" Top:.162" 2nd:.152" Oil:.145" The pistons above will also work for the 6.8L V10 modular. Dome Volume: 0 cc Compression Ratio: 10.96:1 w/ 51 cc & 3.543" Stroke 1.5 mm,.220" down Second Ring: 1.5 mm 3 mm Deck Thickness:.185" Pin Included: tool steel P/N (.120" wall, 88 grams, 2.500" long ) Round Wire Locks: P/N " wide Piston Clearance:.0035" measured 1.100" from bottom of the oil ring 95
10 PLATINUM SERIES PISTONS FORD 4.6L and 5.4L SOHC and DOHC ( 2 & 4 VALV ALVE ) 11 cc DISH PISTON 2.500" length tool steel pin included Round wire locks included - NO CHARGE Full banded skirt design for increased skirt stability Dome Volume: -11 cc Compression Ratio: 9.38:1 w/ 51 cc & Stroke Deck Thickness: mm,.220" down Second Ring: 1.5 mm 3 mm FORD 4.6L and 5.4L SOHC and DOHC ( 2 & 4 VALV ALVE ) 23 cc DISH PISTON 2.500" length tool steel pin included Round wire locks included - NO CHARGE Full banded skirt design for increased skirt stability Dome Volume: -23 cc Compression Ratio: 8.15:1 w/ 51 cc & Stroke Deck Thickness: mm,.220" down Second Ring: 1.5 mm 3 mm MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" Top:.162" 2nd:.152" Oil:.145" The pistons above will also work for the 6.8L V10 modular. Pin Included: tool steel P/N (.120" wall, 88 grams, 2.500" long ) Round Wire Locks: P/N " wide Piston Clearance:.0035" measured 1.100" from bottom of the oil ring " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" Top:.162" 2nd:.152" Oil:.145" The pistons above will also work for the 6.8L V10 modular. Pin Included: tool steel P/N (.120" wall, 88 grams, 2.500" long ) Round Wire Locks: P/N " wide Piston Clearance:.0035" measured 1.100" from bottom of the oil ring 96
11 1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY PLATINUM SERIES PISTONS FORD 4.6L and 5.4L SOHC and DOHC ( 2 & 4 VALV ALVE ) 18 cc SPHERICAL DISH PISTON 2.500" length tool steel pin included Round wire locks included - NO CHARGE Full banded skirt design for increased skirt stability " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" : Top:.162" 2nd:.152" Oil:.145" The pistons above will also work for the 6.8L V10 modular. Dome Volume: -18 cc Compression Ratio: 8.53:1 w/ 51 cc & Stroke 1.5 mm,.220" down Second Ring: 1.5 mm 3 mm Pin Included: tool steel P/N (.120" wall, 88 grams, 2.500" long ) FORD 4.6L and 5.4L SOHC and DOHC ( 2 & 4 VALV ALVE ) HIGH SILICON STREET MASTER BUDGET VERSION 18 cc SPHERICAL DISH PISTON Perfect blend of economy and high performance 1.2 mm offset wrist pin location for quiet start-ups. Mimics OEM design 2.500" length tool steel pin included Round wire locks included Full banded skirt design for increased skirt stability " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" : Top:.162" 2nd:.152" Oil:.145" The pistons above will also work for the 6.8L V10 modular. Dome Volume: -18 cc Compression Ratio: 9.53:1 w/ 42 cc & Stroke 1.5 mm,.220" down Second Ring: 1.5 mm 3 mm Pin Included: tool steel P/N (.120" wall, 88 grams, 2.500" long ) Round Wire Locks: Piston Clearance: Round Wire Locks: Piston Clearance: P/N " wide.0035" measured 1.100" from bottom of the oil ring P/N " wide.0035" measured 1.100" from bottom of the oil ring 97
12 PLATINUM SERIES PISTONS ACURA / HONDA Tool steel pin included - integral to the piston design Roundwire locks included - NO CHARGE Rings included - NO CHARGE MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Bore Size Over Rod Compression Dome Compression Piston Piston Included Part No. mm Size Length Stroke Distance Volume(cc) Ratio Type Wt / Gms Ring Set Acura Integra GSR B18C1 DOHC V-Tec.827"/21mm x 2.250" Pin STD 5.433" 3.433" 1.181" :1 Dish mm 5.433" 3.433" 1.181" :1 Dish STD 5.433" 3.433" 1.181" :1 Dome mm 5.433" 3.433" 1.181" :1 Dome STD 5.433" 3.433" 1.195" :1 Dome mm 5.433" 3.433" 1.195" :1 Dome Acura Integra Type R B18C5 DOHC V-Tec.827"/21mm x 2.250" Pin mm 5.433" 3.433" 1.195" :1 Dome mm 5.433" 3.433" 1.195" :1 Dish Acura RSX 02-Up - K20A-A2-A3 DOHC V-Tec.866"/22mm x 2.500" Pin STD 5.472" 3.386" 1.181" :1 Dish STD 5.472" 3.386" 1.181" :1 Dome STD 5.472" 3.386" 1.181" :1 Dome Honda CRV B20B4 w/ B16A1-A2-A3 Head.827"/21mm x 2.250" Pin STD 5.394" 3.504" 1.181" :1 Dish mm 5.394" 3.504" 1.181" :1 Dish mm 5.394" 3.504" 1.181" :1 Dish STD 5.394" 3.504" 1.181" :1 Dome mm 5.394" 3.504" 1.181" :1 Dome mm 5.394" 3.504" 1.181" :1 Dome Honda CRV 02-Up - K24A w/ K20A-A2-A3 Head DOHC V-Tec.866"/22mm x 2.500" Pin STD 5.984" 3.897" 1.181" :1 Dish STD 5.984" 3.897" 1.181" :1 Flat Top STD 5.984" 3.897" 1.181" :1 Dome Honda Del Sol 93-97/Civic SI B16A1-A2-A3 DOHC V-Tec.827"/21mm x 2.250" Pin STD 5.290" 3.047" 1.181" :1 Dome mm 5.290" 3.047" 1.181" :1 Dome STD 5.290" 3.047" 1.181" :1 Flat Top mm 5.290" 3.047" 1.181" :1 Flat Top Honda Prelude 97-01/92-96 Si - H22A1 DOHC V-Tec.866"/22mm x 2.500" Pin STD 5.636" 3.571" 1.220" :1 Dish STD 5.636" 3.571" 1.220" :1 Dome
13 1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY PLATINUM SERIES PISTONS MITSUBISHI / TOYOTA Tool steel pin included - integral to the piston design Roundwire locks included - NO CHARGE Rings included - NO CHARGE Bore Size Over Rod Compression Dome Compression Piston Piston Included Part No. mm Size Length Stroke Distance Volume(cc) Ratio Type Wt / Gms Ring Set Mitsubishi Eclipse/Eagle Talon GS/GST (1st Gen) - 4G63/4G63T.827"/21mm x 2.250" Pin mm 5.905" 3.465" 1.375" :1 Dish Mitsubishi Eclipse/Eagle Talon GS/GST (2nd Gen) - 4G63/4G63T.866"/22mm x 2.250" Pin mm 5.905" 3.465" 1.375" :1 Dish Mitsubishi 4G63 Stroker (1st Gen).827"/21mm x 2.250" Pin mm 5.905" 3.937" 1.130" :1 Dish Mitsubishi 4G63 Stroker (2nd Gen).866"/22mm x 2.250" Pin mm 5.905" 3.937" 1.130" :1 Dish Toyota Supra Turbo JZGTE 3.0L.866"/22mm x 2.500" Pin mm 5.590" 3.386" 1.338" :1 Dish P/N s & REQUIRE and are shipped with groove lock spacers. SLOWBOY RACING Mitsubishi Eclipse 99
14 PLATINUM SERIES PISTONS PLATINUM PISTONS INCREMENTAL SIZES MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Manley Performance will manufacture incremental bore sizes of any listed catalog piston with reasonably short lead times. The minimum quantity is eight pieces. The ordering process is as simple as ! 1. Select the catalog part number you wish manufactured with the singular exception of the final size. 2. Tell us the bore size of your block. We will manufacture the exact piston number you have selected except with proper clearance for your stated block dimension. 3. You will be billed by our forging number, not the catalog part number. CUSTOM PLATINUM PISTONS Manley Performance inventories the piston forgings listed below to manufacture custom pistons for original equipment engine producers, private label engine part suppliers and volume performance engine builders. We can also produce a forging within ten weeks for any other application a customer may desire. CUSTOM BLANK FORGING NUMBERS Part No. Bore Range Description Valve Angle Wrist Pin Length mm mm Sport Compact Dish, Flat Top, Dome Factory 2.250" / 2.500" " " Small Block Chevy LS-1 Flat Top " / 2.500" " " Small Block Chevy & Flat Top " " " Small Block Chevy Flat or Dish; Oldsmobile " / 2.950" " " Small Block Chevy Formula Won " " " Small Block Chevy, Chrysler, Ford with thicker deck Factory 2.500" " " Big Block Chevy Flat Top & Inverted Dome Factory 2.930" " " Big Block Chevy Hollow Dome Factory 2.930" " " Ford 4.6L and 5.4L 2618 Material Factory 2.500" " " Ford 4.6L and 5.4L High Silicon Street Master Material Factory 2.500" MINIMUM QUANTITIES Minimum quantities depend on the variance from pistons we have previously produced, but in general reasonably small numbers such as 80 pieces can be manufactured on a one time order basis. With an annual contract, even smaller monthly releases such as 40 pieces are possible. SELECTED PISTON PINS Manley Performance carries in stock the following piston pins to support our custom blank forging inventory. Forging No. Piston Pin Selection Please refer to page 102 for piston pin detailed information GROOVE LOCK SPACERS Should your custom Platinum Piston requirements necessitate the wrist pin hole break into the oil ring groove, we can widen the oil ring groove and incorporate a grove lock spacer in one of the following sizes listed below. Part No. Description mm " to 3.582" Bore " Bore " Bore " to 4.060" Bore " to 4.155" Bore " Bore " to 4.560" Bore " to 4.625" Bore 100
15 1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY PISTON RINGS PISTON RING SETS High performance ductile iron with plasma moly in-lay.005" oversize* Second Ring: Reverse twist cast iron.005" oversize* Three piece, standard tension, full oil return * Part numbers with asterisks are a drop-in, not file fit ring sets. Part No. Size Actual Bore Ring Widths Oil Ring Type 3.905" CHEVROLET LS " 3.905" 1.5 mm x 1.5 mm x 3 mm Standard Tension (9-13 lbs.) 4" CHEVROLET and FORD " 4.020" 1/16" x 1/16" x 3/16" Standard Tension (18-22 lbs.) " 4.030" 1/16" x 1/16" x 3/16" Standard Tension (18-22 lbs.) " 4.035" 1/16" x 1/16" x 3/16" Standard Tension (18-22 lbs.) " 4.040" 1/16" x 1/16" x 3/16" Standard Tension (18-22 lbs.) " 4.060" 1/16" x 1/16" x 3/16" Standard Tension (18-22 lbs.) *.005" 4.005" 1.5 mm x 1.5 mm x 3 mm Standard Tension (9-13 lbs.) " 4.030" 1.5 mm x 1.5 mm x 3 mm Standard Tension (9-13 lbs.) *.035" 4.035" 1.5 mm x 1.5 mm x 3 mm Standard Tension (9-13 lbs.) " 4.040" 1.5 mm x 1.5 mm x 3 mm Standard Tension (9-13 lbs.) " 4.060" 1.5 mm x 1.5 mm x 3 mm Standard Tension (9-13 lbs.) " 4.030".043" x.043" x 3 mm Standard Tension (9-13 lbs.) *.040" 4.035".043" x.043" x 3 mm Standard Tension (9-13 lbs.) " 4.040".043" x.043" x 3 mm Standard Tension (9-13 lbs.) " 4.060".043" x.043" x 3 mm Standard Tension (9-13 lbs.) 4 1/8" CHEVROLET Std " 1/16" x 1/16" x 3/16" Standard Tension (18-22 lbs.) " 4.155" 1/16" x 1/16" x 3/16" Standard Tension (18-22 lbs.) " 4.125".043" x.043" x 3 mm Standard Tension (9-13 lbs.) " 4.155".043" x.043" x 3 mm Standard Tension (9-13 lbs.) CHEVROLET " 4.500" 1/16" x 1/16" x 3/16" Standard Tension (21-25 lbs.) " 4.530" 1/16" x 1/16" x 3/16" Standard Tension (21-25 lbs.) " 4.560" 1/16" x 1/16" x 3/16" Standard Tension (21-25 lbs.) " 4.600" 1/16" x 1/16" x 3/16" Standard Tension (21-25 lbs.) 4.6L and 5.4L FORD " 3.552" 1.5 mm x 1.5 mm x 3 mm Standard Tension (9-13 lbs.) " 3.572" 1.5 mm x 1.5 mm x 3 mm Standard Tension (9-13 lbs.) " 3.582" 1.5 mm x 1.5 mm x 3 mm Standard Tension (9-13 lbs.) SPORT COMPACT * Std. 81 mm 1.0 mm x 1.2 mm x 2.8 mm Standard Tension (7-11 lbs.) *.5 mm 81.5 mm 1.0 mm x 1.2 mm x 2.8 mm Standard Tension (7-11 lbs.) * Std. 84 mm 1.2 mm x 1.2 mm x 2.8 mm Standard Tension (7-11 lbs.) *.5 mm 84.5 mm 1.2 mm x 1.2 mm x 2.8 mm Standard Tension (7-11 lbs.) * Std. 85 mm 1.2 mm x 1.2 mm x 2.8 mm Standard Tension (7-11 lbs.) *.5 mm 85.5 mm 1.2 mm x 1.2 mm x 2.8 mm Standard Tension (7-11 lbs.) * Std. 86 mm 1.2 mm x 1.2 mm x 2.8 mm Standard Tension (7-11 lbs.) *.5 mm 86.5 mm 1.2 mm x 1.2 mm x 2.8 mm Standard Tension (7-11 lbs.) * Std. 87 mm 1.2 mm x 1.2 mm x 2.8 mm Standard Tension (7-11 lbs.) 101
16 WRIST PINS & WRIST PIN LOCKS WRIST PINS Straight and taper wall construction Large O.D. chamfer pins requiring round wire locks Exacting size control and perfect concentricity Inside of each pin is totally free of tooling marks MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Part No. Quantity Description Diameter Wall Type Material Length Wall Thickness Lock Rings Wgt / Grams pcs. SB Chevy.927" Straight Tool Steel 2.300".095" Spiral pcs. SB Chevy.927" Straight Tool Steel 2.300".130" Spiral pcs. SB Chevy.927" Straight Tool Steel 2.300".095" Round Wire pcs. SB Chevy.927" Straight Tool Steel 2.300".130" Round Wire pcs. SB Chevy.927" Straight Tool Steel 2.500".095" Spiral pcs. SB Chevy.927" Straight Tool Steel 2.500".125" Spiral pcs. SB Chevy.927" Straight Standard 2.500".150" Spiral pcs. SB Chevy.927" Straight Standard 2.500".150" Round Wire pcs. SB Chevy.927" Straight Tool Steel 2.750".125" Spiral pcs. SB Chevy.927" Taper Tool Steel 2.750".105" -.140" Spiral pcs. SB Chevy.927" Straight Tool Steel 2.950".125" Spiral pcs. SB Chevy.927" Taper Tool Steel 2.950".100" -.140" Spiral pcs. SB Chevy LS-1.945"/24mm Straight Tool Steel 2.300".120" Spiral pcs. SB Chevy LS-1.945"/24mm Straight Tool Steel 2.300".120" Round Wire pcs. BB Chevy.990" Straight Tool Steel 2.930".150" Spiral pcs. BB Chevy.990" Straight Tool Steel 2.930".180" Spiral pcs. BB Chevy.990" Straight Tool Steel 2.930".150" Round Wire pcs. BB Chevy.990" Straight Tool Steel 2.930".180" Round Wire pcs. BB Chevy.990" Taper Tool Steel 2.930".125" -.180" Spiral pcs. Chrys " Straight Tool Steel 2.500".120" Spiral pcs. Sport Compact.866"/22 mm Straight Tool Steel 2.250".120" Round Wire pcs. Ford 4.6, 5.4L.866"/22 mm Straight Tool Steel 2.500".120" Spiral pcs. Ford 4.6, 5.4L.866"/22 mm Straight Tool Steel 2.500".150" Spiral pcs. Ford 4.6, 5.4L.866"/22 mm Straight Tool Steel 2.500".120" Round Wire pcs. Ford 4.6, 5.4L.866"/22 mm Straight Tool Steel 2.500".150" Round Wire pcs. Ford 351 W.912" Straight Tool Steel 2.500".120" Spiral pcs. Sport Compact.827"/21 mm Straight Tool Steel 2.250".150" Round Wire 91 WRIST PIN LOCKS Wrist pin locks are shipped no charge with all Manley pistons Weight / Grams Part No. Quantity Type Pin Diameter Description Per Lock pcs..072" Spiral.927" Small Block Chevrolet pcs..074" Round Wire.927" Small Block Chevrolet pcs..042" Spiral.990" Big Block Chevrolet & Small Block Chrysler pcs..074" Round Wire.990" Big Block Chevrolet pcs..042" Spiral.867" 4.6L / 5.4L - Ford pcs..061" Round Wire 22 mm /.867" 4.6L / 5.4L - Ford
PLATINUM SERIES PISTONS
1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY 08701 PLATINUM SERIES PISTONS LATE MODEL STOCK CHEVROLET FORMULA - WON DESIGN 4" BORE FLAT T TOP 23 HEAD Super lightweight design Lateral gas ports included
More informationSTAINLESS VALVES HONDA / ACURA RACE MASTER VALVES MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Head Stem O / A Tip Underhea
Sport Compact Parts 2008 STAINLESS VALVES MITSUBISHI RACE FLO VALVES 3 XH-426 Stainless Exhaust Material 3 NK-842 Stainless Intake Material 3 Chrome Stems and Hard Tips 3 Swirl Polished and Fully Machined
More informationSPORT T COMPACT CAT ALOG
2004 CAT ALOG For over 38 years Manley Performance has provided superior quality internal engine components for the most demanding and extreme applications in the domestic V-8 market. We are now focusing
More informationHeat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under 7500 rpm
PUSHRODS Small Block Chevrolet Swedged End Pushrods.080 Wall 1010 Steel Heat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under
More informationSPORT COMPACT CATALOG
PISTONS ARIAS PISTONS Irvine, California - November 3, 2017 -- CP-Carrillo, Inc. and Arias Industries, Inc., a high performance pistons manufacturer, jointly announced today that CP-Carrillo will acquire
More informationUNITED ENGINE & MACHINE CO. World Headquarters. Global Distribution Center COATING OPTIONS NOW AVAILABLE
800-648-7970 775-882-7790 Supplemental Piston Catalog 1 UNITED & MACHINE CO. Global Distribution Center United Engine & Machine Company 217 3rd Street Douglas, AZ 85607 Phone (520) 805-0051 Fax (520) 805-0572
More informationALVE LOCKS. 7 vs SUPER 7 vs 10 VALV 7 STAMPED VALV 7 MACHINED VALV
1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY 08701 VALVE LOCKS 7 vs SUPER 7 vs 10 VALV ALVE LOCKS The original stamped 7 valve lock served the industry well until drag racers discovered the Vasco Jet valve
More informationALVE LOCKS. 7 vs SUPER 7 vs 10 VALV 7 STAMPED VALV 7 MACHINED VALV
1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY 08701 VALVE LOCKS 7 vs SUPER 7 vs 10 VALV ALVE LOCKS The original stamped 7 valve lock served the industry well until drag racers discovered the Vasco Jet valve
More informationManley Performance Products, Inc. Manley WestW MANLEY PERFORMANCE PRODUCTS, INC.
Manley Performance Products, Inc. 1960 Swarthmore Ave Lakewood, NJ 08701 Phone ( 732 ) 905-3366 Fax ( 732 ) 905-3010 East Coast Manufacturing Plant 9:00 AM - 5:30 PM EST Manley Performance Products, Inc.
More informationOFF THE SHELF, IN YOUR ENGINE.
WISECO PISTONS OFF THE SHELF, IN YOUR ENGINE. - Engineering Excellence - In-House Forging - Precision Manufacturing - Quality Products Wiseco is your source for off-the-shelf performance pistons! With
More information[ What s In The Name? ]
[ What s In The Name? ] If the name is ARIAS, it is over thirty-seven years of forged piston innovation that has set the standard for piston performance. Founded in the workshop and on the racetrack by
More informationAcura K20 Roller Rocker. Valve Guides. Valve Locks
Competition Plus, 6000 Series and 5000 Series Valves In the Sport Compact market for more than 18 years Ferrea has been the leader in offering a specific valve for your specific application. The competition
More informationSTREET/STREET - FLAT TOP
Small-Block Mopar STREET/STREET - FLAT TOP Designed to fit most OEM open and closed chamber heads Will work with aftermarket Edelbrock & Indy heads Can be used with small nitrous applications Compression
More information25563_Mahle_HiRes.ps - 2/22/2008 8:53 AM 2008 Racing Components
2008 Racing Components With an 80 plus year history of innovation and racing experience, MAHLE is the global leader in forged piston technology. Today, MAHLE pistons are powering champions in NASCAR, World
More informationTOOLS TOOLS. 4 oz. Extreme Pressure Lube #3 The assembly lubricant preferred by top engine builders Can be used as a rod bolt lubricant
TOOLS 4 oz. Extreme Pressure Lube # The assembly lubricant preferred by top engine builders Can be used as a rod bolt lubricant 40 Extreme Pressure Lube # Manley Lube For Connecting Rod Bolts Provides
More information2010 contents MASTER CATALOG RUNBC.COM BRIANCROWER.COM. ph
010 contents.com Horsepower solutions for: Honda b16a/b18c, b18a/b18b, h/ha, k0a/k0z, k0a/k4a, f0c/fc, c0a/cb, Nissan sr0det, ka4de, vq5de, vq5hr, tb48, Toyota jzgte, jzge, 7mgte,1jzgte/ge, azfe, sgte,
More informationMM HiFlo ST Engines. 4 Cylinder Engines - M10. 6 Cylinder Engines - M30. Baby Six Engines - M20
MM HiFlo ST Engines 4 Cylinder Engines - M10 2002, 320i, 318i 85-4 Cyl SOHC Engines 2200 Sport Engine... 155 HP... 6495 800 2200 Rally Engine... 160 HP... 6995 800 2300 Rally Engine... 165 HP... 7995 800
More informationPh: Fax:
JE Pistons opened its doors for business in 1947 with one simple objective, to supply the racing community with the highest quality pistons and components available in the marketplace. Although times,
More informationMM HiFlo ST Engines. M42 & M44 Engines. 4 Cylinder Engines - M10. 6 Cylinder Engines - M30. M50, M50tu, S50, M52 & S52 Engines. Baby Six Engines - M20
MM HiFlo ST Engines 4 Cylinder Engines - M10 2002, 320i, 318i 85-4 Cyl SOHC Engines 2200 Rally Engine... 160 HP... 7995 1000 2100 FI Engine... 12 lbs 275 HP... 8995 1000 2000-2200 Race Engines..210-240
More informationShort Block Contains. Long Block. Crankshaft Connecting Rods Pistons Camshaft Timing Gears. Same as short block plus. Cylinder heads Lifters Push Rods
Short Block Short Block Contains Crankshaft Connecting Rods Pistons Camshaft Timing Gears Long Block Same as short block plus Cylinder heads Lifters Push Rods Displacement Volume of all cylinders swept.
More informationFord 4.6L (2V) SPECIFICATIONS
Ford 4.6L (2V) SPECIFICATIONS General Specifications Item Specifications Silicone Gasket and Sealant F7AZ-19554-EA WSE-M4G323-A4 Premium Engine Coolant VC-4A, VC-5 in Oregon, CXC-10 in Canada ESE-M97B44-A
More informationMotorcycle cover images courtesy of Luke Leatherman
Motorcycle cover images courtesy of Luke Leatherman VALVE TRAIN COMPONENTS VALVES The standard of the industry since their inception, Manley valves are designed to outflow and outperform all others even
More informationAIR BYPASS VALVE. Installation Instructions: s, s, s & s
AIR BYPASS VALVE Installation Instructions: 20-400s, 20-401s, 20-402s & 20-403s! This WARNING: installation is not for the mechanically challenged! If you are not mechanically inclined or do not understand
More informationManley Valve Locks... simply the best! Conventional vs. Bead Loc Valve Stem Grooves
VALVE LOCKS Manley Valve Locks... simply the best! Conventional vs. Bead Loc Valve Stem Grooves The groove in a valve stem, seemingly unimportant, in reality is vital to the success of a valve s performance.
More informationThe Pro s choice for over 50 years!
100% forged and machined in the USA The Pro s choice for over 50 years! All VENOLIA Pistons are constructed from tried and proven 2618 T61 or 4032 T62 alloys. A billet is heated to 800 F and forged using
More informationMercedes. EVO 1 M102E23 2.3L 16V Turbo (must use K1 149mm rod. Stock is 145mm) EVO 2 M102E25 2.5L 16V Turbo
FORGED AUTOMOTIVE RACING PISTONS SPORT COMPACT SERIES Mercedes EVO M02E23 2.3L 6V Turbo (must use K 49mm rod. Stock is 45mm). KE230M955 95.50 Std. 9550XX 468 KE230M96 96.00 0.50 80.25 49.00 30 57-0 9.0:
More informationAEM Replacement Filters for AEM COLD AIR Intakes.
AEM Replacement Filters for AEM COLD AIR Intakes. AEM Cold Air Intake For ACURA CL 01-03 3.2L. Non-Type S AEM Part 21-416 Uses Filter: 21-202DK CL Type S 01-02 A/T AEM Part 21-419 Uses Filter: 21-203DK
More informationQT-302FA FORD 302 MODIFIED 3.400" STROKE CHEVY RJ 5400CC* $ QT-302FB FORD 302 MODIFIED 3.250" STROKE 5400 $
ITEM NO. DESCRIPTION (PRICES ARE FREIGHT INCLUDED) ROD PRICE **Notice** All cast cranks are to be discontinued when sold out. NO RETURNS! Replace only for defective. CRANKSHAFT- NODULAR IRON 80-60-06 QT-526
More informationQF PERFORMANCE CATALOG
QF17-07 2017 PERFORMANCE CATALOG www.qualcast.com www.ymme.biz QualFast Table Of Contents Component (Prefix) Page Street Performance Valves (53-)... 1 Racing Valves (12-)... 3 Sport Compact High Performance
More informationE M1-M :0.03 A-B C M1, M2, M4, M
0 0.05 A-B 0.05 54.06±0.15 2.129±.006 127.83±0.15 5.033±.006 181.06±0.15 7.129±.006 265.82±0.15 10.466±.006 299.64±0.15 11.797±.006 304.70±0.15 11.996±.006 411.48±0.15 16.200±.006 J H G 51 +0.1 0 2.008
More informationAluminum HONDA Block Technical Notes
Aluminum HONDA Block Technical Notes Deck Height 212mm / 8.346" STD B-16 / B-18 226mm / 8.898" STD B-20 Bores 81.5mm (3.209") = 81.23mm unfinished 84.5mm (3.327") = 83.31mm unfinished Main Bearing Journal
More informationNew SOLID ROLLER LIFTERS SOLID ROLLER LIFTERS. Elite Race Solid Roller Lifters. Elite Race Solid Roller Lifter Oiling Path
New Elite Race Solid Roller Lifters If you re looking for the ultimate lifter to withstand even the most demanding racing conditions, look no further. The COMP Cams Elite Race Solid Roller Lifters feature
More informationTHE LEADER IN HIGH PERFORMANCE CRANKSHAFTS CONNECTING RODS ROTATING ASSEMBLIES
THE LEADER IN HIGH PERFORMANCE SHAFTS CONNECTING S ROTATING ASSEMBLIES 34 TH EDITION V2 THE LEADER IN INNOVATION & INGENUITY FROM STOCK REPLACEMENT TO CUSTOM BILLET SHAFTS With over 50 years of manufacturing
More information"XLS" Series 5 H.P. BRIGGS & STRATTON. Supplied with rings, circlips & lightweight wrist pin
5 H.P. BRIGGS & STRATTON "XLS" Series The same race winning design and manufacturing technology that is applied to Wiseco s NASCAR piston program has been incorporated into our "XLS" Series 5HP Briggs
More information165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster
165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster Head Torque---------------------------------------------65-70 Ft. Lbs. with 7/16 stud Pedestal Torque--------------------------------------------------25-30
More informationCATALOG JUL I
CATALOG 902-18 JUL 2018 ------- - I Performance Under Pressure Fel-Pro Performance gaskets deliver reliable sealing under grueling racing conditions. Proven winners in every form of motorsports! Oval track
More informationFrom The Track... To The Street!
Instruction Sheet For JIMS Twin Cam Flywheel Assemblies & Big Bore Kit For the following part numbers 1881, 1882, 1883, 1884, 1886, 1888, 1937, 1938, 1941, 1942, 1943, 1944, 1945, 1946, 1957, 1958, 1959,
More informationGet IN TOUCh OUR HISTORY THE RACER S COMPANY IT S WHO WE ARE
OUR HISTORY THE RACER S COMPANY Winning racers don t find victory lane by accident. It takes dedication, knowledge, drive and power to beat your competition. At Lunati, we have racing pumping through our
More informationCylinder Head Comparison Sheet Big Block Mopar
Cylinder Head Comparison Sheet Big Block Mopar PowerPort Series Cylinder Heads for Big Block Mopar @.700" Valve Lift PowerPort 240 240cc Street 78cc -profiled 2.190" intake; 1.760" exhaust 334 cfm intake;
More informationCB Super Race Cranks. Forged Chromoly Cranks ENGINE KITS & ENGINE PARTS Machined from an E4340 Chromoly forging!
CB Super Race Cranks Machined from an E4340 Chromoly forging! Chromoly steel is one of the strongest metals that can be used for the manufacture of crankshafts. Progressive dies are used in the forging
More informationPBM PERFORMANCE PRODUCTS LIMITED ONE YEAR WARRANTY
LIMITED WARRANTY PBM PERFORMANCE PRODUCTS LIMITED ONE YEAR WARRANTY There is absolutely no warranty on the following: PBM Performance Products warrants that all of its products are free from defects in
More information2006 TABLE OF CONTENTS
Part# 98250 Effective 11-01-2005 2 PHONE: 310-370-5501 FAX: 310.214.2285 www.scatcrankshafts.com 2006 TABLE OF CONTENTS IN THE EARLY 60 S Tom Lieb started peddling parts out of his garage in Los Angeles,
More informationQT-360 CHRYSLER " MAIN 4.00"STROKE STOCK OE ROD 6123 $ QT-455O OLDSMOBILE " MAIN 4.25" STROKE STOCK OE ROD 6735 $ 330.
ITEM NO. DESCRIPTION ROD PRICE ** Notice** All cast cranks are to be discontinued when sold out. Replace only for defectives! No returns. CRANKSHAFT- NODULAR IRON 80-60-06 QT-442 GMC 350 STOCK 3.480" STROKE
More informationWrist Pins. Stocking Wris Pins. NEW! New Stocking 4130 Piston Pins 4130 CHROME MOLY. Ph:
Wrist Pins 4130 CHROME MOLY 4130 G-Series Piston Pins (CONTINUED) Wall G-7872250155* 88 0.827 G-8272500155 104 G-8662500155 111 0.875 G-8752500155* 112 0.905 G-9052500155 117 0.906 G-9062500155 118 0.905
More informationR-Series Cylinder Heads for Big Block Chevy
Overview Material TFS-41400004 A356-T6 Combustion Chamber Intake Port Exhaust Port Sizes 122cc 340cc 137cc 2.25 in. Intake, Springs 1.530 in. Dual Springs for Mechanical Flat Tappet and Hydraulic Locks
More information1.37mm. Subaru EJ20 79mm Stroker Pre October 1998 (Sleeved blocks without access holes) (Rear Thrust - DOHC Crank) 48cc -9cc
Subaru EJ20 2.0L 6V DOHC Impreza WRX October 998 and older, 2 Subaru EJ20 79mm Stroker Pre October 998 (Sleeved blocks without access holes) (Rear Thrust - DOHC Crank), 6 Subaru EJ20 2.0L 6V Impreza WRX
More informationDART Aluminum HONDA Block Technical Notes
DART Aluminum HONDA Block Technical Notes Deck Height 212mm / 8.346 Std B-16 / B-18 226mm / 8.898 Std B-20 Bores 81.5mm (3.209 ) = 81.23mm unfinished 84.5mm (3.327 ) = 83.31mm unfinished Main Bearing Journal
More informationPISTONS FOR POWER. When it comes to pistons for a high-performance. Making More Power Reliably Through Pistons Technology [TECH] By Steve Dulcich
[TECH] PISTONS FOR POWER Making More Power Reliably Through Pistons Technology By Steve Dulcich When it comes to pistons for a high-performance engine, the average builder or enthusiast looks at a limited
More informationPRSRT STD PAID V8 and FORD 4 CYL
V8 and FORD 4 CYL discount catalog - 2009 V8 PISTONS - GREAT VALUE! PRO STAR FLAT TOP PISTONS 4 EYEBROW 350 ULTRALIGHTS (RA-PS4350M).....................................$539.00 As light as 385g. Up to
More informationALL Gen III heads are inter-changeble. However, they need to be matched up with the proper engine combo to see any gains.
ALL Gen III heads are inter-changeble. However, they need to be matched up with the proper engine combo to see any gains. Here is a list of a known production casting #'s: 933 97 aluminum perimeter bolt
More informationWorld Formula TECH MANUAL
World Formula TECH MANUAL Section 1 General Rules 1. Only stock Briggs & Stratton World Formula Model # 124435-8101 will be used in this class except as provided in this Tech manual. All parts will be
More informationIGNITION ACCESSORIES COIL COVERS COIL BRACKET CHROME TOP HAT WIRE RETAINER CHROME PLATED VACUUM ADVANCE COVER SPARK PLUG BOOT INSULATORS 6012G
IGNITION ACCESSORIES COIL COVERS Chrome plated steel coil covers feature universal design to accept most stock coils. Includes chrome plated mounting bracket. Universal Coil Cover, horizontal mount...9777
More informationPushrod Accessories & Rev Kits
Pushrod Accessories & Rev Kits PUSHROD GUIDE PLATES Crower s pushrod guide plates are specially hardened for added strength and durability. They are positioned on the rocker arm studs to guarantee proper
More informationHolley GM LS1/2/6, LS3, and LS7 Hi-Ram Modular Intake Manifold Kits
Holley GM LS1/2/6, LS3, and LS7 Hi-Ram Modular Intake Manifold Kits Holley P/N Engine Application & Induction Configuration 300-112 LS3 Hi-Ram, Carbureted, 2 x 4500 Dominator, 2 throttle bores (sideways
More informationcompetitionclutch.de
competitionclutch.de Competition Clutch (CCI) is the fastest growing performance clutch company in North America. CCI contributes this growth to our commitment in the innovation and quality of the products
More informationTABLE OF CONTENTS. CP PISTONS MITSUBISHI ACURA HONDA FORD HYUNDAI MAZDA MINI COOPER
TABLE OF CONTENTS 04 06 12 13 14 16 ABOUT US ACURA HONDA DODGE FORD HYUNDAI MAZDA MINI COOPER MITSUBISHI NISSAN SUBARU CP PISTONS CP Pistons was founded to service the needs of those with the desire to
More informationRaceCeiver Required, NO other radios or communication equipment or mirrors allowed at any time.
RULES UCRA 602/SPORTSMAN SERIES Double file re-starts for the 2017 season RaceCeiver Required, NO other radios or communication equipment or mirrors allowed at any time. A. BODY RULE: same as super late
More informationUNDERSTANDING ROD RATIOS
UNDERSTANDING ROD RATIOS By Larry Carley, Technical Editor lcarley@babcox.com Performance engine builders are always looking at changes they can make that will give their engine an edge over the competition.
More information2018 Junior Sprint Rules
2018 KidSprint Engine Rules Briggs World Formula 2018B All parts must be Briggs & Stratton factory production parts unless otherwise noted in these rules. No machining, polishing or alteration of any parts
More informationLifters - Mechanical Roller
Mechanical Roller Lifters Crane roller lifters are the standard by which all others are judged. From our first horizontal locking bar version, with patented roller shield body, to our latest Ultra Pro-
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Honda Year and Model: 2012-2013 Civic Si This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationPART NUMBERS SPECS FEATURES OPTIONS R260RE-13 R270RE-13 R280RE-13 R283-5RE-13 R286RE-13 R295-RE-13 R305-RE-13 AND MIDGET SPECIALS
SPECS Intake port: 260-320 cc Chamber volume: 50 cc Intake valve diam.: 2.180-2.250 Exhaust valve diam.: 1.600-1.650 Valve length: 5.950-6.050 PART NUMBERS R260RE-13 R270RE-13 R280RE-13 R283-5RE-13 R286RE-13
More informationGASKETS ENGINE OVERHAUL GASKET KITS ENGINE REBUILD OVERHAUL GASKET KITS MAKE ENGINE YEAR PART NO.
ENGINE REBUILD OVERHAUL GASKET KITS Designed for stock, non-high performance engine rebuilds Engineered to meet or exceed OE gasket and seal specifications Overhaul gasket kits include all gaskets and
More informationGeneral Engine Rules Common to all Makes:
NEEDMORE SPEEDWAY 2017 CRATE LATE MODEL ENGINE RULES Engine in car must match manufacturer of body used. Example: Ford Thunderbird must run Ford Engine: Camaro must use Chevy Engine: Dodge Intrepid must
More informationHolley Ford 351W Hi-Ram Modular Intake Manifold Kits
Holley Ford 351W Hi-Ram Modular Intake Manifold Kits Holley P/N Engine Application & Induction Configuration 300-241 Hi-Ram, 1 x 95mm LS Throttle Body (longitudinal mount) w/ port EFI provisions & fuel
More informationGOOD BETTER BEST. AMERICAN MOTORS CORPORATION (AMC) I (2.5) center distance = 5.045
DUTY BILLET DBL ROLLER.250 TRUE ROLLER CHAIN AMERICAN MOTORS CORPORATION (AMC) I-4 250 (2.5) I-6 199, 232, 2 V-8 290 thru 401 center distance = 4.965 BUICK V-6 198, 225, 231 w/out Integral Distributor
More informationSIZE PRESSURE APPLICATION NOTES PN BOLT WEIGHT BOLT STUD FLYWHEEL CIRCLE SET SET TOOTH COUNT
Pressure Plates RAM performance pressure plates are engineered and built to meet the demands of high horsepower street and competition cars and trucks. These are not converted or modified factory stock
More informationKid Sprint Engine Rules Briggs World Formula
Kid Sprint Engine Rules Briggs World Formula 2017 Jr Sprint Engine Rules Briggs World Formula effective 2/1/2017. All parts must bebriggs & Stratton factory production parts unless otherwise noted in these
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES REAR PARKING BRAKE KIT VENTED ROTOR TYPE (.50 OFFSET) BIG BEARING FORD, NEW STYLE PART NUMBER 0-70* WARNING INSTALLATION OF THIS KIT SHOULD ONLY BE PERFORMED
More informationOEM Replacement. Street Performance. SFI Race 2008 APPLICATION GUIDE
OEM Replacement Street Performance SFI Race 2008 APPLICATION GUIDE POWERBOND RANGE OEM REPLACEMENT STREET PERFORMANCE SFI RACE Powerbond OEM replacement balancers feature the strength and durability of
More informationIndividual Competitors:
Attached are the Vehicle Technical Specification (VTS) sheets that you requested. They are quite self-explanatory. Please complete and return them to the Club Racing Technical Department along with a letter
More informationINSTALLATION INSTRUCTIONS AUTOMOTIVE PISTONS
Before balancing these pistons, be sure they are as you ordered. Used or altered parts cannot be returned for refund, credit or exchange regardless of the circumstances. In the event that your pistons
More informationLavonia Speedway 2018 Racing Season
Lavonia Speedway 2018 Racing Season Stock 4 Cylinder- (Window Safety Net & Mufflers are Mandatory) (*note 2 engine combinations*) BODY - A. Stock auto only B. May have complete aluminum body C. Inner panel
More informationFord Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
More informationEibach Valve Springs
Eibach Valve Springs eibach.com EVS-Pro Race-Proven-Motorsport Quality Maximum for Maximum Performance and Durability Increased Seat for Optimum Performance Higher Natural Frequency for High RPM Capability
More informationSTREET BIG BLOCK CHEVY
WORLD CLASS ENGINES OPTIONAL ALL-ALUMINUM MERLIN ENGINE WEIGHS ONLY 471 LBS. 509&540 There s nothing quite as in-your-face as a big-inch rat motor. With a much larger displacement than any factory big
More informationLS CHEVROLET CNC-PORTED HEADS FOR EXTRA POWER!
LS CHEVROLET WARHAWK 15 ALUMINUM CYLINDER HEADS Clearly the industry s most efficient replacement for the LS1 cylinder head, World s 15 Warhawk casting deliver more power than other aftermarket heads in
More informationdial Bore gauge set deck Bridges 6'' stainless steel Calipers rocker stud remover 6'' digital Calipers top dead Center stop
415 dial Bore gauge set Used for checking cylinder bores, but is also useful for checking connecting rod bores for size, straightness or taper. Accurate to.0005. 15052 Dial Bore Gauge Set deck Bridges
More informationVictor Reinz. Performance. Gaskets
Victor Reinz Performance Gaskets www.victorreinz.com Performance gaskets from Victor Reinz the best of all worlds. In 2016, two great gasket brands were brought together under the Dana banner. Victor Reinz,
More informationFebruary 17, 2012 Price subject to change without notice 1 of 15
Category Sub Category Stock Code Description Air System Intake Gaskets GIG100 Thermal Shield Intake Manifold Gasket - D Series $38.99 GIG101 Thermal Shield Intake Manifold Gasket - B16A $38.99 GIG102 Thermal
More informationAWARD WINNING 2007 AIA BEST NEW PRODUCTS FOR IMPORT CARS OR TRUCKS
AWARD WINNING 2007 AIA BEST NEW PRODUCTS FOR IMPORT CARS OR TRUCKS VOL.3 TBK1001 SPARK PLUG TUBE SEAL 4 OIL PUMP SEAL 1 OIL PUMP HOUSING SEAL 1 1987-1989 TOYOTA CELICA ST, GT, 3SFE 1987-2001 TOYOTA CAMRY
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES REAR PARKING BRAKE KIT VENTED ROTOR TYPE (.8 OFFSET) BOLT CHEVY PART NUMBER 0-7* WARNING INSTALLATION OF THIS KIT SHOULD ONLY BE PERFORMED BY PERSONS EXPERIENCED
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES REAR PARKING BRAKE KIT VENTED ROTOR TYPE (.8 OFFSET) BOLT CHEVY PART NUMBER GROUP 0-7 INSTALLATION OF THIS KIT SHOULD ONLY BE PERFORMED BY PERSONS EXPERIENCED
More informationEXECUTIVE ORDER D 777. Relating to Exemptions Under Section of the California Vehicle Code. KTN Thermo Dynamics KTN Thermo Spacer
State of California AIR RESOURCES BOARD EXECUTIVE ORDER D 777 Relating to Exemptions Under Section 27156 of the California Vehicle Code KTN Thermo Dynamics KTN Thermo Spacer Pursuant to the authority vested
More informationLOBE RATED DURATION IN LOBE TAPPET LIFT THEORETICAL VALVE 0 Lash CAMSHAFT TYPE NUMBER DURATION DEGREES TDC ROCKER ARM RATIO
A look into the COMP Cams Master Lobe Library Since 1977, COMP Cams main goal has been to be the best in camshaft design and technology. The techniques and ideas incorporated in our camshaft designs have
More informationUltra Street 2017 Rules
Ultra Street 2017 Rules www.mdra275.com BODY: Fiberglass/Carbon body panels are limited to hood, rear deck lid, fenders, doors, and bumpers. Cowl hoods may not be taller than half way point of the windshield.
More informationEngine Balancing Updated
Engine Balancing Updated The AERA Technical Committee offers the following engine balancing information gathered over the years from various sources within the automotive industry. This Technical Bulletin
More information2008 Vehicle Technical Specifications
Vehicle Manufacturer: Year and Model: Chevrolet (1997 2004) C5 / Z06 Corvette This specifications form was developed by SCCA Pro Racing and will be used by the Series Technical Administrator to establish
More informationSurvival of the Fittest Piston and Rings Continue to Evolve, Larry Carley, Underhood Service, February 2001
Survival of the Fittest Piston and Rings Continue to Evolve, Larry Carley, Underhood Service, February 2001 Stronger, lighter, thinner, more durable. That pretty well sums up the changes that have been
More informationPUSHRODS. Precision. Consistency. Geometry
Precision Consistency Geometry As cam profiles get more aggressive and valve spring pressures increase, the importance of selecting the right pushrods has never been more critical. COMP Cams carries a
More informationENGINE MECHANICAL <2.0L ENIGNE>
11A-1 GROUP 11A ENGINE MECHANICAL CONTENTS GENERAL DESCRIPTION......... 11A-2.................. 11A-3 11A-2 This model is equipped with a newly developed 4B11 engine. It is a 4-cylinder,
More information2 PIECE DESIGN-DOWEL PINNED WITH O-RING SEAL & 4500 Series
ALL NEW ALL NEW GEN 1 MANIFOLDS 2 PIECE DESIGN-DOWEL PINNED WITH O-RING SEAL 4150 & 4500 Series Available now for All Pro 13 & 11 Super Tall Heads Perfect for Super Dirt Late Models & High End Drag Cars
More information2013 Catalog and Tech
2013 Catalog and Tech AMERICAN MADE FOR 70+ YEARS AND GOING STRONG! Hy-Lift Johnson Inc: We have been manufacturing lifters in Muskegon Michigan USA for over 70 years and some of our employees have been
More informationTIMING SETS. Balanced. Accuracy. Reliability
Balanced Accuracy Reliability TIMING SETS With a variety of timing sets and components that include double roller sets, adjustable and keyway adjustable sets, belt drives and timing covers, COMP Cams carries
More informationDURATION IN DEGREES LOBE LIFT DURATION IN DEGREES LOBE LIFT
NOSTALGIA PLUS SOLIDS Like the Nostalgia Plus Hydraulics, these lobes are designed to mimic the sound of the great engines of the past while improving performance by applying today's design techniques.
More informationPART NUMBERS SPECS FEATURES OPTIONS R260RE-13 R270RE-13 R280RE-13 R283-5RE-13 R286RE-13 R295-RE-13 R305-RE-13 AND MIDGET SPECIALS
SPECS Intake port: 260-320 cc Chamber volume: 50 cc Intake valve diam.: 2.180-2.250 Exhaust valve diam.: 1.600-1.650 Valve length: 5.950-6.050 PART NUMBERS R260RE-13 R270RE-13 R280RE-13 R283-5RE-13 R286RE-13
More informationBracket Kits & Accessories
WWW.STREETRODBRACKETRY.COM 1-866-330-0428 / 817-614-9659 Bracket Kits & Accessories When details matter A/C, ALT, P/S Brackets & Accessories Aluminum & steel fabricated bracket sets V-belt & multi-groove
More information2018 Alfa Romeo Giulia SPECIFICATIONS
2018 Alfa Romeo Giulia SPECIFICATIONS All dimensions are in inches (millimeters) unless otherwise noted. Information shown is correct at time of publication and is subject to change. GENERAL INFORMATION
More information2013 Senoia Raceway Rulebook
2013 Senoia Raceway Rulebook E-mail tech questions to: johnnywalls31@yahoo.com BOMBER RULES BODY 1. All bodies must be stock steel bodies. No fiberglass or aluminum body panels allowed. Fenders and quarter
More information4. Hickory little engine: 3000/1350 lbs. with driver. (3050/1375 with 500 gram pistons).
2018 Limited Late Model Stock Rules $1000 fine for tire soaking $100 fine for antifreeze The Limited Late Model Limited Division will run under the 2018 NASCAR Whelen All American Series Late Model Stock
More information