R-Series Cylinder Heads for Big Block Chevy
|
|
- Darrell Carpenter
- 5 years ago
- Views:
Transcription
1
2 Overview Material TFS A356-T6 Combustion Chamber Intake Port Exhaust Port Sizes 122cc 340cc 137cc 2.25 in. Intake, Springs in. Dual Springs for Mechanical Flat Tappet and Hydraulic Locks Retainers Rocker Studs Guideplates OEM Accessory Holes Quantity TFS A356-T6 122cc 340cc 137cc 2.25 in. Intake, in. Dual Springs for Mechanical TFS A356-T6 122cc 360cc 137cc 2.30 in. Intake, in. Dual Springs for Mechanical Flat Tappet and Hydraulic TFS A356-T6 122cc 360cc 137cc 2.30 in. Intake, in. Dual Springs for Mechanical * Trick Flow R-Series cylinder heads for big block Chevy are now available with strong, lightweight titanium valve spring retainers. Replace the 0 with a T in the 5th character of the part number for heads with titanium retainers. For example TFS becomes TFS-4140T007 for titanium upgrade. Included Parts Two assembled cylinder heads Two packs of 17 head bolt washers (TFS ) Two packs of four 3/8 in. guideplates (TFS ) One pack of eight rocker arm studs for intake rockers (TFS ) One pack of eight rocker arm studs for exhaust rockers (TFS ) One specification/recommended components sheet One instruction packet (TFS-DP-12)
3 Technical Specs Material: A356-T6 aluminum Combustion Chamber : 122cc Intake Port : 340cc or 360cc Exhaust Port : 137cc s: CNC profiled, one piece, non-magnetic stainless steel Intake : 2.25 in. or 2.30 in. head diameter, 11/32 in. stem diameter, in. OAL (overall length) Exhaust : in. head diameter, 11/32 in. stem diameter, in. OAL Guide Type: Bronze alloy,.500 in. O.D. Seals: Viton Seats: Interlocking ductile iron Springs: For Mechanical Flat Tappet and Hydraulic in. O.D. double with damper in. installed height in. 420 lbs. per inch spring rate.680 in. max valve lift Springs: For Mechanical : in. O.D. double with damper in. installed height in. 500 lbs. per inch spring rate.700 in. max valve lift Locks: 10 degree machined steel with recess for lash caps Retainers: Chromemoly steel or Titanium Rocker Studs: ARP 7/16 in., included with all assembled heads Guideplates: hardened pushrods, included with all heads OEM Accessory Holes: Spark Plugs: Street: Autolite-3922 or equivalent 3/4 in. reach, 5/8 in. hex gasket seat plug Race: Champion C59C or equivalent. Always adjust heat range for your specific application NOTE: The use of a valvetrain combination that exceeds the maximum valve lift will void the warranty. Piston-to-valve, piston-to-head, and piston-to-spark plug clearances must be checked in all cases. Recommended Components: Head Gasket: Fel-Pro 1017 NOTE: Fel-Pro 1027 head gaskets are not recommended due to their smaller chamber openings. Intake Gasket: Mr. Gasket 121 Exhaust Gasket: Fel-Pro 1412 Head Bolts: ARP (12 pt.) Head Studs: ARP (12 pt. nuts with undercut studs) Rocker Arms: Crane Gold or eqivalent For more information contact: Trick Flow Specialties 1248 Southeast Avenue Tallmadge, OH Sales & Tech: (330) Fax: (330)
4 Replacement Parts Replacement Assembled Heads: Assembled Heads, Single TFS TFS TFS TFS Bare Castings with Seats and Guides TFS-4141B340 TFS-4141B360 BBC head, 340cc, each BBC head, 360cc, each Replacement Components: TFS " Int. valve 1 TFS " Int. valve 1 TFS " Exh. valve 1 TFS " plus.050 retainers 16 TFS /8 guideplates 8 TFS bronze int. guide 1 TFS bronze exh. guide 1 TFS /16" head bolt washers 17 TFS " hyd / flat springs 16 TFS " roller springs 16 TFS ductile iron int. seat 1 TFS ductile iron exh. seat 1 TFS viton seals 16 TFS " spring i.d. locators 16 TFS /32 machined 10 degree locks 16 TFS bbc int. rocker studs 8 TFS bbc exh. rocker studs 8 Warranty Trick Flow Specialties warrants its assembled street high performance cylinder heads to be free from defects in both materials and workmanship for a period of one year from date of purchase. All other products, including race cylinder heads, are warranted for a period of 90 days from date of purchase. This warranty covers manufacturing defects only. Damage due to negligence or improper installation will not be covered. Alterations made to the product such as porting, milling, welding, or other custom modifications are done at the owner's sole risk and will void the warranty. Trick Flow's sole obligation shall be to repair or replace any product that is defective under this warranty. This warranty covers only the product itself and not the cost of installation or removal. Customers who believe they have a defective product should either return it to the dealer from whom it was purchased or call Trick Flow at with a complete description of the problem. After obtaining a return authorization number, the product must be returned freight prepaid. If a thorough inspection by the factory indicates defects in workmanship or materials, our sole obligation shall be to repair or replace the product.
5
Twisted Wedge 170 Aluminum Cylinder Heads for the Small Block Ford
Twisted Wedge 170 Aluminum Cylinder Heads for the Small Block Ford Specialties Thank you for purchasing Trick Flow Twisted Wedge 170 aluminum cylinder heads designed for the Small Block Ford. Please follow
More informationGenX Street/Strip Cylinder Heads for the GM LT1
GenX Street/Strip Cylinder Heads for the GM LT1 Thank you for purchasing Trick Flow GenX Street/Strip aluminum cylinder heads for the GM LT1. Please follow the steps outlined in this instruction manual
More informationTwisted Wedge 11R Aluminum Cylinder Heads
Twisted Wedge 11R Aluminum Cylinder Heads for the Small Block Ford Thank you for purchasing Trick Flow Twisted Wedge 11R aluminum cylinder heads designed for the Small Block Ford. Please follow the steps
More informationGenX Street/Strip Cylinder Heads for the GM LT1
GenX Street/Strip Cylinder Heads for the GM LT1 Thank you for purchasing Trick Flow GenX Street/Strip aluminum cylinder heads for the GM LT1. Please follow the steps outlined in this instruction manual
More informationSummit 170cc Cylinder Heads
Summit 170cc Cylinder Heads for the Small Block Chevrolet Thank you for purchasing a set of the Summit 170cc Small Block Chevrolet aluminum cylinder heads. Please follow the steps outlined in this instruction
More informationllnl!!i MADE IL.l ln THE USA Super and 195 Cylinder Heads for the Small Block Chevrolet Recommended Tools Project Overview
llnl!!i MAE IL.l ln THE USA Super 23 175 and 195 Cylinder Heads for the Small Block Chevrolet Thank you for purchasing Trick Flow Super 23 175 and 195 Small Block Chevrolet aluminum cylinder heads. Please
More information165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster
165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster Head Torque---------------------------------------------65-70 Ft. Lbs. with 7/16 stud Pedestal Torque--------------------------------------------------25-30
More informationPERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS CATALOG #S
PERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS CATALOG #S 60619 60639 60659 60697 60715 60719 60735 60739 60759 60849 60859 60869 60879 60889
More informationPERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS
PERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS 60619 60639 60659 60697 60715 60719 60735 60739 60759 60849 Catalog #s 60859 60869 60879 60887
More informationM-6007-Z351SR Sealed Crate Engine INSTRUCTION SHEET
Please visit www.fordracingparts.com for the most current instruction information!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE
More informationSuperior Design. Advanced Manufacturing. Proven Performance.
Superior Design. Advanced Manufacturing. Proven Performance. Trick Flow Specialties reputation was earned by creating, engineering, and manufacturing budget-friendly cylinder heads that deliver phenomenal
More informationNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF FORD RACING PERFORMANCE PARTS. STOP! READ THIS!
STOP! READ THIS! THIS ENGINE REQUIRES RACING OIL THAT CONTAINS 1200 PPM (parts per million) ZDDP (zinc-dialkyl-dithio-phosphate). THIS ENGINE IS SHIPPED WITHOUT OIL! Page 1 of 6 Please contact the Tech
More informationRead all instructions before beginning machining or assembly.
A4 blocks now come with steel billet main caps only (all 5 are cross bolted. Aluminum replacement caps can be special ordered directly from Pro Gram Engineering phone (330) 745-1004. Head Studs: Head stud
More informationPushrod Accessories & Rev Kits
Pushrod Accessories & Rev Kits PUSHROD GUIDE PLATES Crower s pushrod guide plates are specially hardened for added strength and durability. They are positioned on the rocker arm studs to guarantee proper
More informationNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF FORD RACING PERFORMANCE PARTS.
Please visit www.fordracingparts.com for the most current instruction information!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE
More informationGeneral Engine Rules Common to all Makes:
NEEDMORE SPEEDWAY 2017 CRATE LATE MODEL ENGINE RULES Engine in car must match manufacturer of body used. Example: Ford Thunderbird must run Ford Engine: Camaro must use Chevy Engine: Dodge Intrepid must
More informationQF PERFORMANCE CATALOG
QF17-07 2017 PERFORMANCE CATALOG www.qualcast.com www.ymme.biz QualFast Table Of Contents Component (Prefix) Page Street Performance Valves (53-)... 1 Racing Valves (12-)... 3 Sport Compact High Performance
More information420cc Builder Modified Predator OHV engine Technical Specifications 5/27/13
BM (Builder Modified) Predator 420cc OHV engine With Electric Start Approved Engine: OHV Predator 420cc engine modified only according to these BM OHV Engine Spec. ENGINE SPEC SHEET FOR BM 420cc OHV CLASS
More informationHi-Tech & Pro Magnum Roller Rocker Arms
Hi-Tech & Pro Magnum Roller Rocker Arms Thank you for choosing COMP Cams products; we are proud to be your manufacturer of choice. Please read this complete instruction sheet carefully (including the application
More informationHeat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under 7500 rpm
PUSHRODS Small Block Chevrolet Swedged End Pushrods.080 Wall 1010 Steel Heat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under
More informationWorld Formula TECH MANUAL
World Formula TECH MANUAL Section 1 General Rules 1. Only stock Briggs & Stratton World Formula Model # 124435-8101 will be used in this class except as provided in this Tech manual. All parts will be
More informationTable of Contents. Sales Policies & Procedures We accept Visa or Master Card. Method of shipping is UPS and Fed-Ex.
World Products has been producing affordable high performance cast iron engine blocks and cylinder heads for over twenty five years, beginning with a pioneering small block Chevrolet cylinder head and
More informationWORLD Products ~ 7301 Global Dr. ~ Louisville, KY ~ ~ worldproducts.net
World Products has been producing affordable high performance cast iron engine blocks and cylinder heads for twenty five years, beginning with a pioneering small block Chevrolet cylinder head and continually
More informationPage 1 of 7 1965 Ford Mustang 4.7L Eng VIN A Base Service Manual: 221", 260", 289" V8 ENGINES Print Date: ENGINE NOTES 1962-65 COOLANT LOSS OR WATER PUMP & FRONT COVER CORROSION CORRECTION: May be caused
More informationM-6007-Z363 Crate Engine Specifications and Owner's Manual
M-6007-Z363 Crate Engine Specifications and Owner's Manual!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. INSTALLATION INSTRUCTIONS: These instructions consist of (4)
More informationintroduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide.
introduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide. In an effort to make servicing your V-Twin engine easier, the staff at Midwest Motorcycle Supply have put together what we believe
More informationLS CHEVROLET CNC-PORTED HEADS FOR EXTRA POWER!
LS CHEVROLET WARHAWK 15 ALUMINUM CYLINDER HEADS Clearly the industry s most efficient replacement for the LS1 cylinder head, World s 15 Warhawk casting deliver more power than other aftermarket heads in
More informationSee pg. 293 RPM POWER RANGE. Camshaft Series/ Grind Number LIFTERS *d
Pontiac V-8 55-81 265 (4.L)-287-01 (4.9L)-16-26-47-50- 70-89-400 (6.6L)-421-428-455 cu.in. Hydraulic Lifter Camshafts Brute low-end torque, smooth idle, daily usage, fuel economy, 1600-2200 cruise RPM,
More informationPART NUMBERS SPECS FEATURES OPTIONS R260RE-13 R270RE-13 R280RE-13 R283-5RE-13 R286RE-13 R295-RE-13 R305-RE-13 AND MIDGET SPECIALS
SPECS Intake port: 260-320 cc Chamber volume: 50 cc Intake valve diam.: 2.180-2.250 Exhaust valve diam.: 1.600-1.650 Valve length: 5.950-6.050 PART NUMBERS R260RE-13 R270RE-13 R280RE-13 R283-5RE-13 R286RE-13
More informationInstructions For Trick Flow Track Heat 4.6L 2V SOHC Ford Intake Manifold System TFS-518B0002, TFS , TFS
MADE IN U.S.A. Instructions For Trick Flow Track Heat 4.6L 2V SOHC Ford Intake Manifold System TFS-518B0002, TFS-51800002, TFS-51811002 1999-2004 FORD MUSTANG GT INSTALLATION INSTRUCTIONS 1 LIMITED WARRANTY
More informationAdvanced Auto Tech. ASE A 1 Test Preparation Engine Upper End Theory & Service
Advanced Auto Tech ASE A 1 Test Preparation Engine Upper End Theory & Service Torque to yield bolts stretch to their yield point when tightened and should not be reused. True or False The sealing lip &
More informationM-6007-A50NA Engine Specifications and Owner's Manual
M-6007-A50NA Engine Specifications and Owner's Manual Fordracingparts.com Techline 1-800-367-3788 Page 1 of 11 IS-1850-0377 Please visit www.fordracingparts.com for the most current instruction information.!!!
More informationALVE LOCKS. 7 vs SUPER 7 vs 10 VALV 7 STAMPED VALV 7 MACHINED VALV
1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY 08701 VALVE LOCKS 7 vs SUPER 7 vs 10 VALV ALVE LOCKS The original stamped 7 valve lock served the industry well until drag racers discovered the Vasco Jet valve
More informationAlternator bracket Box 1. Alternator engine plate Box 1. Alternator pulley Box 1. Alternator spacer (1.760") Box 1
NASCAR SPEC ENGINE KIT PACKING LIST Part + Required Fasteners Quantity RYRE Part # Box # Inside Crate Alternator 1 100001 Individual Box 3/8-24 x 5.00 Hex 1 7/16-14 x 5.50 Hex 1 3/8-24 Flanger Nut 1 3/8
More information2018 Pure Stock Rules. The rules listed below are being enforced for all drivers of the Pure Stock class to abide
2018 Pure Stock Rules The rules listed below are being enforced for all drivers of the Pure Stock class to abide by. For questions contact the race track or technical director. Contact information is listed
More informationSee pg Camshaft PART NUMBER/ Emissions Code RPM POWER RANGE LIFTERS *
Chevrolet V-8 67-95 96-402-427-454 cu.in. CAMSHAFTS Application Mechanical Lifter Camshafts Excellent low end and mid range torque and HP, fair idle, moderate performance usage, bracket racing w/ heavy
More informationWe Support the National Automotive Technicians Education Foundation. Contact us to learn about the Educational Institution Advantage Program.
everal years ago an alliance was formed to find a cost-efficient method to produce high-quality, technically-advanced, yet affordably-priced performance engine parts. A small group of professionals, with
More informationX E D N I T X CK E N BA
INDEX ENGINE BLOCKS CYLINDER HEADS INTAKE MANIFOLDS ACCESORIES SMALL BLOCK CHEVROLET: SMALL BLOCK CHEVROLET: SMALL BLOCK CHEVROLET: VALVE COVERS Motown Aluminum S/R Iron Motown STUD GIRDLES Motown II Iron
More information#100 TO #199 SPORTSMAN 1600 LIGHT BUGGY TECHNICAL SPECIFICATIONS
#100 TO #199 SPORTSMAN 1600 LIGHT BUGGY TECHNICAL SPECIFICATIONS DEFINITION 1600 Light Buggy is a one-person, limited 4-wheel car using Volkswagen type 1 stock components with a 1585 cc engine. All parts
More informationUSST National Engine Rule Set (2010)
USST National Engine Rule Set (2010) The USST National Series combines trucks from many different origins and blends them into a racing class that includes their different features. With the high expense
More informationPro Iron Small Block - Technical Notes
DART Pro Iron Small Block - Technical Notes Deck Height... 9.025" Bore... 4.00" or 4.125" unfinished Main Bearing Size... 350 (2.45") & 400 (2.65") Weight... 175 lbs Largest Recommended Bore... 4.165"
More informationdial Bore gauge set deck Bridges 6'' stainless steel Calipers rocker stud remover 6'' digital Calipers top dead Center stop
415 dial Bore gauge set Used for checking cylinder bores, but is also useful for checking connecting rod bores for size, straightness or taper. Accurate to.0005. 15052 Dial Bore Gauge Set deck Bridges
More information460cc Do-It-Yourself Assembly Guide
2995 Coleman St North Las Vegas, NV 89032 702-530-7753 702-643-7517 FAX VegasCarts.com 460cc Do-It-Yourself Assembly Guide *DIY Engines do not come with a warranty, these kits are intended for experienced
More informationCOOLING SYSTEM & ACCESSORIES Aluminum Racing Radiators & Accessories Cooling System Accessories Electric Racing Water Pumps &
It may sound good in a catalog or brochure to use words like quality and affordability, but actually delivering on those promises is no easy task. In racing there is no hiding your products performance.
More informationintroduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide.
introduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide. In an effort to make servicing your V-Twin engine easier, the staff at Midwest Motorcycle Supply have put together what we believe
More informationCylinder Head Comparison Sheet Big Block Mopar
Cylinder Head Comparison Sheet Big Block Mopar PowerPort Series Cylinder Heads for Big Block Mopar @.700" Valve Lift PowerPort 240 240cc Street 78cc -profiled 2.190" intake; 1.760" exhaust 334 cfm intake;
More informationALVE LOCKS. 7 vs SUPER 7 vs 10 VALV 7 STAMPED VALV 7 MACHINED VALV
1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY 08701 VALVE LOCKS 7 vs SUPER 7 vs 10 VALV ALVE LOCKS The original stamped 7 valve lock served the industry well until drag racers discovered the Vasco Jet valve
More information347 Series Sealed Racing Engine
347 Series Sealed Racing Engine Sanctioning Body Specifications Handbook S347JR D347SR/D347SR7 1 Table of Contents Page Factory Seals 3-4 Block 5 Crankshaft 5-6 Connecting Rods 7 Piston 7 Timing Chain
More informationLocal Option 206 Rules Manual Section 1 General Rules 1. Only stock Briggs & Stratton LO206 # engine will be allowed in this class.
Local Option 206 Rules Manual Section 1 General Rules 1. Only stock Briggs & Stratton LO206 # 124332-8201engine will be allowed in this class. o All parts will be stock unaltered Briggs & Stratton Animal
More informationFor For more information, see
Crane Sportsman Shaft-Mount Rocker Arms are designed for serious Sportsman and Professional racers. This system was designed to take advantage of the latest developments in advanced composite materials
More informationFor more information, see
Crane Sportsman Shaft-Mount Rocker Arms are designed for serious Sportsman and Professional racers. This system was designed to take advantage of the latest developments in advanced composite materials
More informationKWIK SHOP GENERAL PREDATOR RULES 2019
GENERAL PREDATOR RULES 2019 These rules are intended to keep the engine as Stock Out Of The Box as possible. There are no gray areas. If they do not specifically state that something is allowed, it will
More informationBriggs & Stratton. World Formula & Modified World Formula. Tech Manual
Briggs & Stratton World Formula & Modified World Formula Tech Manual First Issued: May 22, 2007 Updated: January 2017 Jerry Mostek QMA Tech 2012 Quarter Midgets of America, Inc. WORLD FORMULA CLAIM RULE
More informationVisit our website at
EP 2012 NATIONWIDE DISTRIBUTION CENTERS PLUS 5 NEW Locations In Australia Alaska Anchorage 800-288-5573 Arizona Phoenix 888-272-0191 California Anaheim 800-634-0969 Los Angeles 800-995-0536 Oakland 800-234-1410
More information5TH CATEGORY - HISTORIC RACING. GROUP Nc APPROVED VEHICLE SPECIFICATION
5TH CATEGORY - HISTORIC RACING GROUP Nc APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with
More informationTHANK YOU FOR PURCHASING OUR ROCKERS
THANK YOU FOR PURCHASING OUR ROCKERS We have designed and engineered these Real Chrysler rockers specifically for MOPAR wedge engines (not something modified to be close enough to work on a MOPAR). The
More information2016 Rules and Regulations
2016 Rules and Regulations Classes Adult Wing Junior II Wing Junior I Wing 641-204-9551 1102 E 8 th ST S Newton IA 50208 3-22-16 Amended 04/16/16 Cage Requirements Base Frames must be of kart configuration.
More informationFORD 351W Small Block Technical Notes
DART FORD 351W Small Block Technical Notes Deck Height 9.200 & 9.500 Bore 4.00 or 4.125 unfinished Main Bearing Size 302 (2.249 ) & 351C (2.749 ) Weight. 9.200 190 lb / 9.500 195 lb Maximum bore 4.185
More informationINFORMATION SHEET Mopar A-8 Aluminum Race Engine Block PART NUMBER P AB, P AB, P , or P
Engine Block Components (1) Aluminum Engine Block (8) Cylinder Sleeves (installed) (1) Hardware Kit (1) Set of Main Caps (1) Set of Main Cap Fasteners Part Numbers Deck Nominal Max Over Part # Height Bore
More information2013 Senoia Raceway Rulebook
2013 Senoia Raceway Rulebook E-mail tech questions to: johnnywalls31@yahoo.com BOMBER RULES BODY 1. All bodies must be stock steel bodies. No fiberglass or aluminum body panels allowed. Fenders and quarter
More informationTCI Ford C-6 TransBrake Valve Body Shift Pattern: Park, Reverse, Neutral, First, Second, Third
1 INSTRUCTIONS TCI 421500 Ford C-6 TransBrake Valve Body Shift Pattern: Park, Reverse, Neutral, First, Second, Third Thank you for choosing TCI products; we are proud to be your manufacturer of choice.
More informationPLATINUM SERIES PISTONS
1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY 08701 PLATINUM SERIES PISTONS LATE MODEL STOCK CHEVROLET FORMULA - WON DESIGN 4" BORE FLAT T TOP 23 HEAD Super lightweight design Lateral gas ports included
More information122 Fasola Road, Sequim Wa (360) Morgan +4 Engine Rebuild Brochure
122 Fasola Road, Sequim Wa 98382 (360) 582-9020 Morgan +4 Engine Rebuild Brochure This brochure is intended to show the extensiveness of the work performed on the TR engines that I rebuild. I treat each
More informationSprint Car Front Drive Kit for LS Engines (Part #5490 & 5491)
INSTRUCTIONS Sprint Car Front Drive Kit for LS Engines (Part #5490 & 5491) Thank you for choosing products; we are proud to be your manufacturer of choice. Please read this instruction sheet carefully
More informationFor more information, see
Applications for Kit No. 118104-1 Brodix 12x12 series & Brodix GB2000; All-Pro 15 deg and 17 deg Raised Runner heads for Small Block Chevrolets. (Intake Rockers available with.500",.600", and.700" offset,
More informationIron Small Block - Technical Notes
DART Iron Small Block - Technical Notes Deck Height... 9.025" Bore... 4.00" or 4.125" unfinished Main Bearing Size... 350 (2.45") Weight... 175 lbs Largest Recommended Bore... 4.165" Camshaft Bearing Diameter...
More informationFor For more information, see
Applications: For For more information, see www.cranecams.com Big Block Chevrolet Cylinder heads; OEM or Aftermarket having standard valve and stud locations. These include but are not limited to: World
More information2018 Bomber Rules. The rules listed below are now being enforced and are to be added into the rule book
2018 Bomber Rules The rules listed below are now being enforced and are to be added into the rule book for all drivers of the Bomber class to abide by. For questions contact the race track or the technical
More information2018 Junior Sprint Rules
2018 KidSprint Engine Rules Briggs World Formula 2018B All parts must be Briggs & Stratton factory production parts unless otherwise noted in these rules. No machining, polishing or alteration of any parts
More informationSECTION 1 - CHASSIS 1.1 CHASSIS FRAME
5TH CATEGORY - HISTORIC RACING GROUP Nb APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with
More informationSTREET/STREET - FLAT TOP
Small-Block Mopar STREET/STREET - FLAT TOP Designed to fit most OEM open and closed chamber heads Will work with aftermarket Edelbrock & Indy heads Can be used with small nitrous applications Compression
More informationBriggs & Stratton Animal TECH MANUAL Version 1.6 Section 1 General Rules cannot Section 2 Required Modifications Section 3 Allowable Modifications
Briggs & Stratton Animal TECH MANUAL Version 1.6 updated 2/ 7 / 2011 Section 1 General Rules 1. Only stock Briggs & Stratton Animal # 124332-8201and 124332-8203 - 01engine will be allowed in this class.
More information2019 SK Modified Open Engine Rules Supplement
2019 SK Modified Open Engine Rules Supplement 20E- 5 GENERAL ENGINE REQUIREMENTS Engine must be OEM cast iron V8 production block, or the Dart SHP Block. Cylinder heads must be OEM or Dart 10024266, and
More informationLavonia Speedway 2018 Racing Season
Lavonia Speedway 2018 Racing Season Stock 4 Cylinder- (Window Safety Net & Mufflers are Mandatory) (*note 2 engine combinations*) BODY - A. Stock auto only B. May have complete aluminum body C. Inner panel
More informationMotorcycle cover images courtesy of Luke Leatherman
Motorcycle cover images courtesy of Luke Leatherman VALVE TRAIN COMPONENTS VALVES The standard of the industry since their inception, Manley valves are designed to outflow and outperform all others even
More informationPERFORMANCE CATALOG. Rocker Arms Fuel Rail Kits Valve Train Stabilizers Lubricants Apparel & More!! MADE IN AMERICA AND PROUD OF IT!
PERFORMANCE CATALOG Rocker Arms Fuel Rail Kits Valve Train Stabilizers Lubricants Apparel & More!! MADE IN AMERICA AND PROUD OF IT! SHAFT MOUNT ROCKER ARMS STUD MOUNT ROCKER ARMS NEW ADJUSTABLE PEDESTAL
More informationALL Gen III heads are inter-changeble. However, they need to be matched up with the proper engine combo to see any gains.
ALL Gen III heads are inter-changeble. However, they need to be matched up with the proper engine combo to see any gains. Here is a list of a known production casting #'s: 933 97 aluminum perimeter bolt
More informationMODELS CX10 and CX20 INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL
MODELS CX0 and CX20 INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains
More informationhand pumps HAND PUMPS
HAND PUMPS 30 Introduction Adjustable pivot for the absolute lowest handle effort Pivoting linkage reduces wear for longer pump life Fine threaded, no slip release knob for complete control Large bronze
More informationDP DIAPHRAGM PUMP Parts & Instruction Manual
DP-392.1 DIAPHRAGM PUMP Parts & Instruction Manual Price $10.00 CDS-JOHN BLUE COMPANY DIVISION OF ADVANCED SYSTEMS TECHNOLOGY, INC. 290 Pinehurst Drive Huntsville, Alabama 35806 P. O. Box 1607 Huntsville,
More informationRULE BOOK DISCLAIMER
RULE BOOK DISCLAIMER The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable requirements for such events. These
More informationbrands, the company s products are recognized for their quality, reliability and technical innovation.
SeaStar Solutions is pleased to add Detwiler to their family of brands. SeaStar Solutions is the leading global provider of OEM and aftermarket products and accessories for the recreational marine and
More informationDART. Small Block - Technical Notes. Deck Height Bore Main Bearing Size (2.45) 400 (2.65) Weight...
DART Small Block - Technical Notes Deck Height... 9.025 9.325 Bore... 4.000 4.125 Main Bearing Size... 350 (2.45) 400 (2.65) Weight... 210 lbs Largest Recommended Bore..... 4.185 Largest Recommended Crank
More informationPLATINUM SERIES PISTONS
1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY 08701 PLATINUM SERIES PISTONS ULTRA LITE SMALL BLOCK CHEVROLET FORMULA-WON DESIGN FLAT T TOP & 14.5cc DISH 4" BORE 23 HEAD Super lightweight design Lateral gas ports
More informationIron GEN III - Technical Notes
DART Iron GEN III - Technical Notes Deck Height... 9.240" Bore... 4.000 & 4.125 Main Bearing Size... LS-1 (2.558" 2.559") Weight... 227lbs Largest Recommended Bore..... 4.185" Largest Recommended Crank
More informationHolden Camshaft Listings
Holden shaft Listings Crane s Holden V8 Holden V-8, 1969-87....................................................................... 6 Holden V-8, 1988-97.......................................................................
More informationHyd. Hyd to H Hyd. Hyd to H
high energy APPLICATION / HYDRAULIC Ideal for family sedans. Good low end torque and economy, smooth idle. HYDRAULIC Excellent power for towing. Good performance with highway gears, smooth idle. Hyd. Hyd.
More informationalways the case, especially with springs produced by the OE manufacturers for production vehicles.
VALVE TRAIN About Valve Springs Valve Springs... Hardly An Open & Shut Subject! Valve springs are at least as important as any other major performance component in an engine; yet, they are probably the
More information5TH CATEGORY - HISTORIC RACING. GROUP Nc APPROVED VEHICLE SPECIFICATION
5TH CATEGORY - HISTORIC RACING GROUP Nc APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with
More informationTORC SERIES COMPETITION RULES FOR SPORTSMAN 1600 BUGGY
TORC SERIES COMPETITION RULES FOR SPORTSMAN 1600 BUGGY DEFINED AS- A limited 4-wheel vehicle utilizing a type-1, 1600 c.c. Volkswagen air-cooled engine with one person in the vehicle. Division rules supersede
More informationHolden Camshaft Listings
Holden shaft Listings Crane s Holden V8 Holden V-8, 1969-87....................................................................... 2 Holden V-8, 1988-97.......................................................................
More informationPBM PERFORMANCE PRODUCTS LIMITED ONE YEAR WARRANTY
LIMITED WARRANTY PBM PERFORMANCE PRODUCTS LIMITED ONE YEAR WARRANTY There is absolutely no warranty on the following: PBM Performance Products warrants that all of its products are free from defects in
More informationSPORT T COMPACT CAT ALOG
2004 CAT ALOG For over 38 years Manley Performance has provided superior quality internal engine components for the most demanding and extreme applications in the domestic V-8 market. We are now focusing
More information30 Meter Add-On Kit for the DXE-8040VA-1 Vertical Antenna
30 Meter Add-On Kit for the DXE-8040VA-1 Vertical Antenna DXE-8040-30AOK DXE-8040-30AOK-INS Revision 0d DX Engineering 2017 1200 Southeast Ave. - Tallmadge, OH 44278 Phone: (800) 777-0703 Tech Support
More informationUser Assembly and Operation Manual
ITEM: DESCRIPTION: 5800200 User Assembly and Operation Manual Part One Safe Use and Operation Page 2 Part Two Parts Identification Page 3 Part Three Assembly and Installation Page 4 Installation Tips:
More informationPrecision Degree Wheel Kit
555-81621 Precision Degree Wheel Kit Instruction Booklet Instructions for 81621 Camshaft Degree Kit Thank you for purchasing the Jegs Camshaft Degree Kit. Please follow these detailed instructions to properly
More informationHonda CRF 450 R SOHC 4v
.432/.350 292 /294 260 /255 415/416 The "MYSTO" cam designed for race use ONLY. Works good for big bore applications. Requires Exhaust System, High Compression Piston, Larger Diameter Followers, Shortened
More informationLIMITED LATE MODEL. A. Standard Dirt Style body required. A stock appearing nose is required.
LIMITED LATE MODEL BODY: A. Standard Dirt Style body required. A stock appearing nose is required. B. Schaeffer Oil Southern nationals Body rules apply. C. See tech inspector if you have any questions.
More informationItem Description Qty Rate Total
# Item Description Qty Rate 1998-1999 XL883 120+hp 1275 Conversion, sans air cleaner and exhaust XL/Buell 1275 Ki... 3.596 Silver 86-... Silver 3.596 Cylinder, 86-03 2 93.95 187.90T HP 3600 XL30D5 HP 3600
More informationRP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
More information