PLATINUM SERIES PISTONS
|
|
- Benedict Caldwell
- 5 years ago
- Views:
Transcription
1 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY PLATINUM SERIES PISTONS LATE MODEL STOCK CHEVROLET FORMULA - WON DESIGN 4" BORE FLAT T TOP 23 HEAD Super lightweight design Lateral gas ports included Round wire locks included Tool steel pin integral to design.043 x.043" x 3 mm RINGS " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" Top:.155" 2nd:.163" Oil:.190" Dome Volume: -2.0 cc Compression Ratio: 10.34:1 w/ 64 cc & 3.48" Stroke.043",.155" down Second Ring:.043" Oil Ring: 3 mm Deck Thickness:.155" Valve Notches:.220" Int.,.150" Exh. (Customer may request any valve notch depth up to the maximum at no additional charge.) Maximum Fly Cut:.310" Int.,.190" Exh. Max. Valve Sizes: 2.100" Int., 1.625" Exh. Valve Angle: 22 Pin Included: tool steel P/N (.095" wall, 72 grams, 2.300" long ) Round Wire Locks: P/N " wide Piston Clearance:.005" measured 1.100" from bottom of the oil ring Gas Ported SEE PAGE P 110 FOR CUSTOM PISTONS 97
2 PLATINUM SERIES PISTONS SMALL BLOCK CHEVROLET 2 BARREL CLASS - 1/16" RINGS MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: " BORE FLAT T TOP 23 HEAD 1/16" x 3/16" RINGS 2.300" length tool steel pin included - integral to the piston design :.155" thick deck Spiral locks included - NO CHARGE Semi-banded skirt for improved skirt stability " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" The following pistons will include groove lock spacer " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" Top:.183" 2nd:.183" Oil:.190" Dome Volume: -2.5 cc Compression Ratio: 10.34:1 w/ 64 cc & 3.48" Stroke 1/16",.155" down Deck Thickness:.155" Valve Notches:.210" Int.,.150" Exh. (Customer may request any valve notch depth up to the maximum at no additional charge.) Maximum Fly Cut:.360" Int.,.260" Exh. Max. Valve Sizes: 2.100" Int., 1.625" Exh. Valve Angle: 22 Pin Included: tool steel P/N (.095" wall, 74 grams, 2.300" long ) Spiral Locks: P/N " wide SEE PAGE P 110 FOR CUSTOM PISTONS 98
3 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY PLATINUM SERIES PISTONS SMALL BLOCK CHEVROLET 2 BARREL CLASS -.043" RINGS 4" BORE FLAT T TOP 23 HEAD.043 x 3 mm RINGS 2.300" length tool steel pin included - integral to the piston design :.155" thick deck Spiral locks included - NO CHARGE Semi-banded skirt for improved skirt stability " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" " 6.125" 3.480"/3.500" 1.125" The following pistons will include groove lock spacer " 6.200" 3.480"/3.500" 1.050" " 6.200" 3.480"/3.500" 1.050" " 6.200" 3.480"/3.500" 1.050" Top:.155" 2nd:.163" Oil:.190" Dome Volume: -2.5 cc Compression Ratio: 10.34:1 w/ 64 cc & 3.48" Stroke.043",.155" down Second Ring:.043" Oil Ring: 3 mm Deck Thickness:.155" Valve Notches:.210" Int.,.150" Exh. (Customer may request any valve notch depth up to the maximum at no additional charge.) Maximum Fly Cut:.360" Int.,.260" Exh. Max. Valve Sizes: 2.100" Int., 1.625" Exh. Valve Angle: 22 Pin Included: tool steel P/N (.095" wall, 74 grams, 2.300" long ) Spiral Locks: P/N " wide SEE PAGE P 110 FOR CUSTOM PISTONS Gas Ported 99
4 PLATINUM SERIES PISTONS SMALL BLOCK CHEVROLET 4 BARREL CLASS 4" BORE FLAT T TOP 23 HEAD 1/16" x 3/16" RINGS Slightly thicker deck (.185" ) for higher horsepower applications 2.300" length tool steel pin included - integral to the piston design Spiral locks included - NO CHARGE Full banded skirt design for increased skirt stability MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 5.700" 3.480"/3.500" 1.550" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 6.000" 3.480"/3.500" 1.250" " 5.700" 3.750" 1.425" Top:.183" 2nd:.183" Oil:.190" Dome Volume: -4.0 cc Compression Ratio: 10.16:1 w/ 64 cc & 3.48" Stroke 1/16",.185" down Deck Thickness:.185" Valve Notches:.300" Int.,.190" Exh. (Customer may request any valve notch depth up to the maximum at no additional charge.) Maximum Fly Cut:.360" Int.,.260" Exh. Max. Valve Sizes: 2.100" Int., 1.600" Exh. Valve Angle: 22 Pin Included: tool steel P/N (.130" wall, 96 grams, 2.300" long ) Spiral Locks: P/N " wide Piston Clearance: 006" measured 1.100" from bottom of the oil ring SEE PAGE P 110 FOR CUSTOM PISTONS 100
5 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY SPORTSMASTER PISTONS SMALL BLOCK CHEVROLET 4" BORE 23 HEAD FLAT T TOP MS-75 high silicon material Famous Manley skirt profile for smooth cylinder wall compatability Compression Part No. Bore Size Application Rod Length Stroke Distance Weight Ring Set " 4" SB Chevy 5.700" 3.480" 1.560" " 4" SB Chevy 5.700" 3.480" 1.560" " 4" SB Chevy 5.700" 3.480" 1.560" Above pistons also fit engines with 3.750" stroke and 5.565" 400 type connecting rods " 4" SB Chevy 6.000" 3.480" 1.260" " 4" SB Chevy 6.000" 3.480" 1.260" " 4" SB Chevy 6.000" 3.480" 1.260" " 4" SB Chevy 5.700" 3.750" 1.425" " 4" SB Chevy 6.000" 3.750" 1.125" Top:.183" 2nd:.183" Oil:.190" Blank Forging Wrist Part No. Bore Range Description Valve Angle Pin Length " " SB Chevy & Ford Flat Top " Dome Volume: -3.5 cc Compression Ratio: 10:1 w/ 64 cc & 3.48" Stroke 1/16",.175" down Valve Notches:.240" Int..230" Exh. Maximum Fly Cut:.300" Int.,.280" Exh. Max. Valve Sizes: 2.080" Int., 1.600" Exh. Valve Angle: 22 Pin Included: P/N w/.150" wall Spiral Locks: P/N " wide CUSTOM VERSIONS OF SPORTSMASTER TSMASTER PISTONS ARE AVA AILABLE 101
6 PLATINUM SERIES PISTONS BIG BLOCK CHEVROLET BORE FLAT T TOP Full banded skirt for increased skirt stability Tool steel pin included Spiral locks included Pin fitting included Suitable for superchargers, turbos, nitrous MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Compression Piston Dome Piston Part No. Bore Size Rod Length Stroke Distance Wt / Gms Volume Ring Set " 6.135" 4.000" 1.645" cc " 6.135" 4.000" 1.645" cc " 6.135" 4.000" 1.645" cc " 6.135" 4.000" 1.645" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc Top:.193" 2nd:.195" Oil:.190" 1/16",.350" down Intake Valve Notch:.300 Exhaust Valve: Pin Included: tool steel P/N (.180" wall, 170 grams, 2.930" long,.990 dia.) Spiral Locks: P/N " wide (4 per piston) COMPRESSION RATIO CHART Bore Stroke 112 cc 118 cc 124 cc :1 8.7:1 8.4: :1 8.8:1 8.5: :1 8.9:1 8.6: :1 9.0:1 8.7: :1 9.2:1 8.8: :1 9.3:1 8.9: :1 9.4:1 9.0: :1 9.5:1 9.1:1 All compression ratios are calculated at.010 deck clearance. Pistons with and compression distances REQUIRE and are shipped with groove lock spacers. 102
7 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY PLATINUM SERIES PISTONS BIG BLOCK CHEVROLET INVERTED DOME Full banded skirt for increased skirt stability Tool steel pin included Spiral locks included Pin fitting included Suitable for superchargers, turbos, nitrous Compression Piston Dome Piston Part No. Bore Size Rod Length Stroke Distance Wt / Gms Volume Ring Set " 6.135" 4.000" 1.645" cc " 6.135" 4.000" 1.645" cc " 6.135" 4.000" 1.645" cc " 6.135" 4.000" 1.645" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc Top:.193" 2nd:.195" Oil:.190" 1/16",.350" down Intake Valve Notch:.300 Exhaust Valve: Pin Included: tool steel P/N (.180" wall, 170 grams, 2.930" long,.990 dia.) Spiral Locks: P/N " wide (4 per piston) COMPRESSION RATIO CHART Bore Stroke 112 cc 118 cc 124 cc :1 8.3:1 8.0: :1 8.4:1 8.1: :1 8.5:1 8.2: :1 8.6:1 8.3: :1 8.3:1 8.0: :1 8.4:1 8.1: :1 8.5:1 8.2: :1 8.6:1 8.3:1 All compression ratios are calculated at.010 deck clearance. Pistons with and compression distances REQUIRE and are shipped with groove lock spacers. 103
8 PLATINUM SERIES PISTONS BIG BLOCK CHEVROLET BORE HOLLOW DOME Perfect for drag race applications Exact ring groove to skirt squareness Full banded skirt design for increased skirt stability MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Compression Piston Dome Piston Part No. Bore Size Rod Length Stroke Distance Wt / Gms Volume Ring Set " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.385" 4.000" 1.395" cc " 6.535" 4.000" 1.245" cc " 6.535" 4.000" 1.245" cc " 6.535" 4.000" 1.245" cc " 6.535" 4.000" 1.245" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.135" 4.250" 1.520" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.385" 4.250" 1.270" cc " 6.535" 4.250" 1.120" cc " 6.535" 4.250" 1.120" cc " 6.535" 4.250" 1.120" cc " 6.535" 4.250" 1.120" cc Top:.193" 2nd:.195" Oil:.190" 1/16",.300" down except on CD is.270 down Intake Valve Notch:.300 Exhaust Valve: Pin Included: tool steel P/N (.150" wall, 147 grams, 2.930" long,.990 dia.) Spiral Locks: P/N " wide (4 per piston) COMPRESSION RATIO CHART Bore Stroke 112 cc 118 cc 124 cc :1 13.4:1 12.6: :1 13.6:1 12.8: :1 13.7:1 12.9: :1 14.0:1 13.1: :1 14.2:1 13.3: :1 14.4:1 13.5: :1 14.6:1 13.6: :1 14.8:1 13.8:1 All compression ratios are calculated at.010 deck clearance. Pistons with and shorter compression distances REQUIRE and are shipped with groove lock spacers. 104
9 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY PLATINUM SERIES PISTONS CHEVROLET 350 CASCAR RACING SERIES Manley Performance is a proud sponsor of the CASCAR Series " 5.700" 3.480" 1.550" " 5.700" 3.480" 1.550" " 5.700" 3.480" 1.550" " 5.700" 3.480" 1.550" Dome Volume: -11 cc Compression Ratio: 9.6:1 w/ 64 cc & 3.480" Stroke 1/16",.250" down Deck Thickness:.275" Valve Notches:.260" Int.,.170" Exh. Max. Valve Sizes: 2.080" Int., 1.600" Exh. Valve Angle: 22 Pin Included: tool steel P/N (.125" wall, 97 grams, 2.500" long ) Spiral Locks: P/N " wide SEE PAGE P 122 FOR CASCAR SERIES CONNECTING ROD P/N C-8 AND PAGE P 126 FOR CASCAR SERIES CONNECTING ROD P/N S C-8 AND C
10 PLATINUM SERIES PISTONS CHRYSLER 360 CASCAR RACING SERIES MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Manley Performance is a proud sponsor of the CASCAR Series " 6.125" 3.580" 1.665" " 6.125" 3.580" 1.665" Dome Volume: -11 cc Compression Ratio: 9.7:1 w/ 65 cc & 3.580" Stroke 1/16",.250" down Deck Thickness:.260" Valve Notches:.300" Int.,.195" Exh. Max. Valve Sizes: 2.150" Int., 1.700" Exh. Valve Angle: 18 Pin Included: tool steel P/N (.120" wall, 103 grams, 2.500" long ) Spiral Locks: P/N " wide SEE PAGE P 133 FOR CASCAR SERIES CONNECTING ROD P/N S C-8, C-8, AND C-8 SEE PAGE P 110 FOR CUSTOM PISTONS 106
11 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY PLATINUM SERIES PISTONS FORD 351 W CASCAR RACING SERIES Manley Performance is a proud sponsor of the CASCAR Series The following pistons are for CASCAR Series 5.955" stock length connecting rod P/N C-8. Please see page " 5.955" 3.500" 1.769" " 5.955" 3.500" 1.769" " 5.955" 3.500" 1.769" " 5.955" 3.500" 1.769" The following pistons are for CASCAR Series 6.000" length connecting rods P/N C-8 & C-8 Please see page " 6.000" 3.500" 1.724" " 6.000" 3.500" 1.724" " 6.000" 3.500" 1.724" " 6.000" 3.500" 1.724" Dome Volume: -14 cc Compression Ratio: 9.6:1 w/ 62 cc & 3.500" Stroke 1/16",.250" down Deck Thickness:.285" Valve Notches:.270" Int.,.230" Exh. Max. Valve Sizes: 2.080" Int., 1.600" Exh. Valve Angle: 12 Pin Included: tool steel P/N (.120" wall, 95 grams, 2.500" long ) Spiral Locks: P/N " wide SEE PAGE P 110 FOR CUSTOM PISTONS 107
12 PLATINUM SERIES PISTONS FORD 4.6L and 5.4L SOHC and DOHC ( 2 & 4 VALV ALVE ) FLAT T TOP PISTONS SEAN HYLAND MOTORSPORTS TS DESIGN 2.500" length tool steel pin included Round wire locks included - NO CHARGE Full banded skirt design for increased skirt stability MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" Standard Bore: Top:.134" 2nd:.151" Oil:.115".020" and.030" Oversize: Top:.149" 2nd:.154" Oil:.129" The pistons above will also work for the 6.8L V10 modular. Dome Volume: 0 cc Compression Ratio: 10.96:1 w/ 51 cc & 3.543" Stroke 1.5 mm,.250" down Second Ring: 1.5 mm Oil Ring: 3 mm Deck Thickness:.185" FORD 4.6L and 5.4L SOHC and DOHC ( 2 & 4 VALV ALVE ) 11 cc DISH PISTON SEAN HYLAND MOTORSPORTS TS DESIGN 2.500" length tool steel pin included Round wire locks included - NO CHARGE Full banded skirt design for increased skirt stability Dome Volume: -11 cc Compression Ratio: 9.38:1 w/ 51 cc & Stroke Deck Thickness: mm,.250" down Second Ring: 1.5 mm Oil Ring: 3 mm Pin Included: tool steel P/N (.120" wall, 88 grams, 2.500" long ) Round Wire Locks: P/N " wide Piston Clearance:.0035" measured 1.100" from bottom of the oil ring " 5.933" / 6.657"3.543" / 4.165" 1.220" " 5.933" / 6.657"3.543" / 4.165" 1.220" " 5.933" / 6.657"3.543" / 4.165" 1.220" Top:.149" 2nd:.154" Oil:.128" The pistons above will also work for the 6.8L V10 modular. Pin Included: tool steel P/N (.120" wall, 88 grams, 2.500" long ) Round Wire Locks: P/N " wide Piston Clearance:.0035" measured 1.100" from bottom of the oil ring 108
13 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY PLATINUM SERIES PISTONS FORD 4.6L and 5.4L SOHC and DOHC ( 2 & 4 VALV ALVE ) 18 cc SPHERICAL DISH PISTON 2.500" length tool steel pin included Round wire locks included - NO CHARGE Full banded skirt design for increased skirt stability " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" : Standard Bore: Top:.134 2nd:.151 Oil: and.030 Oversize: Top:.149 2nd:.154 Oil:.128 The pistons above will also work for the 6.8L V10 modular. Dome Volume: -18 cc Compression Ratio: 8.83:1 w/ 51 cc & Stroke 1.5 mm,.250" down Second Ring: 1.5 mm Oil Ring: 3 mm Pin Included: tool steel P/N (.120" wall, 88 grams, 2.500" long ) Round Wire Locks: Piston Clearance: P/N " wide.0035" measured 1.100" from bottom of the oil ring FORD 4.6L and 5.4L SOHC and DOHC ( 2 & 4 VALV ALVE ) HIGH SILICON STREET MASTER BUDGET VERSION 18 cc SPHERICAL DISH PISTON Perfect blend of economy and high performance 1.2 mm offset wrist pin location for quiet start-ups. Mimics OEM design 2.500" length tool steel pin included Round wire locks included Full banded skirt design for increased skirt stability " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" " 5.933" / 6.657" 3.543" / 4.165" 1.220" : Standard Bore: Top:.134 2nd:.151 Oil: and.030 Oversize: Top:.149 2nd:.154 Oil:.128 The pistons above will also work for the 6.8L V10 modular. Dome Volume: -18 cc Compression Ratio: 9.53:1 w/ 42 cc & Stroke 1.5 mm,.250" down Second Ring: 1.5 mm Oil Ring: 3 mm Pin Included: tool steel P/N (.120" wall, 88 grams, 2.500" long ) Round Wire Locks: Piston Clearance: P/N " wide.0035" measured 1.100" from bottom of the oil ring 109
14 PLATINUM SERIES PISTONS PLATINUM PISTONS INCREMENTAL SIZES MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Manley Performance will manufacture incremental bore sizes of any listed catalog piston with reasonably short lead times. The minimum quantity is eight pieces. The ordering process is as simple as ! 1. Select the catalog part number you wish manufactured with the singular exception of the final size. 2. Tell us the bore size of your block. We will manufacture the exact piston number you have selected except with proper clearance for your stated block dimension. 3. You will be billed by our forging number, not the catalog part number. CUSTOM PLATINUM PISTONS Manley Performance inventories the piston forgings listed below to manufacture custom pistons for original equipment engine producers, private label engine part suppliers and volume performance engine builders. We can also produce a forging within ten weeks for any other application a customer may desire. CUSTOM BLANK FORGING NUMBERS Part No. Bore Range Description Valve Angle Wrist Pin Length " " Small Block Chevy & Ford Flat Top " " " Small Block Chevy D Dish " " " Small Block Chevy Flat or Dish; Oldsmobile " / 2.950" " " Small Block Chevy Formula Won " " " Small Block Chevy, Chrysler, Ford with thicker deck Factory 2.500" " " Big Block Chevy Flat Top & Inverted Dome Factory 2.930" " " Big Block Chevy Hollow Dome Factory 2.930" " " Ford 4.6L and 5.4L 2618 Material Factory 2.500" " " Ford 4.6L and 5.4L High Silicon Street Master Material Factory 2.500" MINIMUM QUANTITIES Minimum quantities depend on the variance from pistons we have previously produced, but in general reasonably small numbers such as 80 pieces can be manufactured on a one time order basis. With an annual contract, even smaller monthly releases such as 40 pieces are possible. SELECTED PISTON PINS Manley Performance carries in stock the following piston pins to support our custom blank forging inventory. Forging No. Piston Pin Selection Please refer to page 112 for piston pin detailed information GROOVE LOCK SPACERS Should your custom Platinum Piston requirements necessitate the wrist pin hole break into the oil ring groove, we can widen the oil ring groove and incorporate a grove lock spacer in one of the following sizes listed below. Part No. Description " to 3.582" Bore " Bore " to 4.060" Bore " to 4.155" Bore " Bore " to 4.560" Bore " to 4.625" Bore 110
15 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY PISTON RINGS PISTON RING SETS High strength ductile iron with barrel face in-lay plasma moly.005" oversize Second Ring: Low tension, reverse twist, taper face cast iron.005" oversize Oil Ring: Three piece, standard tension, low tension, or ultra low tension, full oil return Part No. Size Actual Bore Ring Widths Oil Ring Type 4" CHEVROLET and FORD " 4.020" 1/16" x 1/16" x 3/16" Standard Tension (14-18 lbs.) " 4.030" 1/16" x 1/16" x 3/16" Standard Tension (14-18 lbs.) " 4.035" 1/16" x 1/16" x 3/16" Standard Tension (14-18 lbs.) " 4.040" 1/16" x 1/16" x 3/16" Standard Tension (14-18 lbs.) " 4.060" 1/16" x 1/16" x 3/16" Standard Tension (14-18 lbs.) " 4.030".043" x.043" x 3 mm Standard Tension (14-17 lbs.) and Ultra Low Tension (4-6 lbs.) " 4.035".043" x.043" x 3 mm Standard Tension (14-17 lbs.) and Ultra Low Tension (4-6 lbs.) " 4.040".043" x.043" x 3 mm Standard Tension (14-17 lbs.) and Ultra Low Tension (4-6 lbs.) " 4.060".043" x.043" x 3 mm Standard Tension (14-17 lbs.) and Ultra Low Tension (4-6 lbs.) 4 1/8" CHEVROLET " 4.125" 1/16" x 1/16" x 3/16" Standard Tension (14-18 lbs.) " 4.155" 1/16" x 1/16" x 3/16" Standard Tension (14-18 lbs.) " 4.125".043" x.043" x 3mm" Standard Tension (14-17 lbs.) and Ultra Low Tension (4-6 lbs.) " 4.155".043" x.043" x 3mm" Standard Tension (14-17 lbs.) and Ultra Low Tension (4-6 lbs.) CHEVROLET " 4.500" 1/16" x 1/16" x 3/16" Standard Tension (20-26 lbs.) and Low Tension (15-20 lbs.) " 4.530" 1/16" x 1/16" x 3/16" Standard Tension (20-26 lbs.) and Low Tension (15-20 lbs.) " 4.560" 1/16" x 1/16" x 3/16" Standard Tension (20-26 lbs.) and Low Tension (15-20 lbs.) " 4.600" 1/16" x 1/16" x 3/16" Standard Tension (20-26 lbs.) and Low Tension (15-20 lbs.) 4.6L and 5.4L FORD " 3.552" 1.5 mm x 1.5 mm x 3 mm Standard Tension (9-13 lbs.) " 3.572" 1.5 mm x 1.5 mm x 3 mm Standard Tension (9-13 lbs.) " 3.582" 1.5 mm x 1.5 mm x 3 mm Standard Tension (9-13 lbs.) As indicated above, certain ring part numbers are packaged with two sets of oil ring expanders. The ultra low and low tension expander is recommended for dry sump oil systems only, while the standard tension expander can be used in either wet or dry sump applications. PISTON RING INSTALLA ALLATION INSTRUCTIONS 1. All top compression rings require file fitting to acheive correct end gap. Use Manley tool P/N After grinding, stone all edges at each gap. Top Ring 2nd Ring Application End Gap End Gap Supercharged / Injected alcohol.018" /.020".012" /.014" Supercharged / Injected gasoline.022" /.024".012" /.014" Carbureted Gasoline Oval Track.018" /.020".012" /.014" Pro Stock, Competition,.018" /.020".012" /.014" Modified Production Drag Race Super Stock.018" /.020".010" /.012" Stock and Street Engines.016" /.018".010" /.012" 2. Install all compression rings with the marked side up. Top rings will be bevel up. Reverse twist second rings will be bevel down. 3. Be certain not to overlap the ends of the oil ring expander. The end gap of the oil ring rails may be from.035" to.080". 111
16 PISTON PINS & LOCK RINGS WRIST PINS Straight and taper wall construction Large O.D. chamfer pins requiring round wire locks Chrome moly ( 4340 ) and tool steel available Exacting size control and perfect concentricity Inside of each pin is totally free of tooling marks MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Part No. Quantity Description Diameter Wall Type Material Length Wall Thickness Lock Rings Wgt / Grams pcs. SB Chevy.927" Straight Tool Steel 2.300".095" Spiral pcs. SB Chevy.927" Straight Tool Steel 2.300".130" Spiral pcs. SB Chevy.927" Straight Tool Steel 2.300".095" Round Wire pcs. SB Chevy.927" Straight Tool Steel 2.300".130" Round Wire pcs. SB Chevy.927" Straight Tool Steel 2.500".095" Spiral pcs. SB Chevy.927" Straight Tool Steel 2.500".125" Spiral pcs. SB Chevy.927" Straight Standard 2.500".150" Spiral pcs. SB Chevy.927" Straight Tool Steel 2.750".125" Spiral pcs. SB Chevy.927" Taper Tool Steel 2.750".105" -.140" Spiral pcs. SB Chevy.927" Straight Tool Steel 2.950".125" Spiral pcs. SB Chevy.927" Taper Tool Steel 2.950".100" -.140" Spiral pcs. BB Chevy.990" Straight Tool Steel 2.930".150" Spiral pcs. BB Chevy.990" Straight Tool Steel 2.930".180" Spiral pcs. BB Chevy.990" Taper Tool Steel 2.930".125" -.180" Spiral pcs. Chrys " Straight Tool Steel 2.500".120" Spiral pcs. Ford 4.6, 5.4L 22 mm Straight Tool Steel 2.500".120" Spiral pcs. Ford 4.6, 5.4L 22 mm Straight Tool Steel 2.500".150" Spiral pcs. Ford 4.6, 5.4L 22 mm Straight Tool Steel 2.500".120" Round Wire pcs. Ford 4.6, 5.4L 22 mm Straight Tool Steel 2.500".150" Round Wire pcs. Ford 351 W.912" Straight Tool Steel 2.500".120" Spiral pcs. Sport Compact 21 mm Straight Tool Steel 2.250".150" Round Wire TBA WRIST PIN LOCKS Wrist pin locks are shipped no charge with all Manley pistons Part No. Quantity Type Pin Diameter Description Weight / Grams pcs..072" Spiral.927" Small Block Chevrolet pcs..074" Round Wire.927" Small Block Chevrolet pcs..042" Spiral.990" Big Block Chevrolet & Small Block Chrysler pcs..042" Spiral.867" 4.6L / 5.4L - Ford pcs..061" Round Wire 22 mm /.867" 4.6L / 5.4L - Ford
PLATINUM SERIES PISTONS
1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY 08701 PLATINUM SERIES PISTONS ULTRA LITE SMALL BLOCK CHEVROLET FORMULA-WON DESIGN FLAT T TOP & 14.5cc DISH 4" BORE 23 HEAD Super lightweight design Lateral gas ports
More informationHeat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under 7500 rpm
PUSHRODS Small Block Chevrolet Swedged End Pushrods.080 Wall 1010 Steel Heat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under
More informationSPORT T COMPACT CAT ALOG
2004 CAT ALOG For over 38 years Manley Performance has provided superior quality internal engine components for the most demanding and extreme applications in the domestic V-8 market. We are now focusing
More informationManley Performance Products, Inc. Manley WestW MANLEY PERFORMANCE PRODUCTS, INC.
Manley Performance Products, Inc. 1960 Swarthmore Ave Lakewood, NJ 08701 Phone ( 732 ) 905-3366 Fax ( 732 ) 905-3010 East Coast Manufacturing Plant 9:00 AM - 5:30 PM EST Manley Performance Products, Inc.
More informationSTAINLESS VALVES HONDA / ACURA RACE MASTER VALVES MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Head Stem O / A Tip Underhea
Sport Compact Parts 2008 STAINLESS VALVES MITSUBISHI RACE FLO VALVES 3 XH-426 Stainless Exhaust Material 3 NK-842 Stainless Intake Material 3 Chrome Stems and Hard Tips 3 Swirl Polished and Fully Machined
More informationUNITED ENGINE & MACHINE CO. World Headquarters. Global Distribution Center COATING OPTIONS NOW AVAILABLE
800-648-7970 775-882-7790 Supplemental Piston Catalog 1 UNITED & MACHINE CO. Global Distribution Center United Engine & Machine Company 217 3rd Street Douglas, AZ 85607 Phone (520) 805-0051 Fax (520) 805-0572
More informationALVE LOCKS. 7 vs SUPER 7 vs 10 VALV 7 STAMPED VALV 7 MACHINED VALV
1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY 08701 VALVE LOCKS 7 vs SUPER 7 vs 10 VALV ALVE LOCKS The original stamped 7 valve lock served the industry well until drag racers discovered the Vasco Jet valve
More informationALVE LOCKS. 7 vs SUPER 7 vs 10 VALV 7 STAMPED VALV 7 MACHINED VALV
1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY 08701 VALVE LOCKS 7 vs SUPER 7 vs 10 VALV ALVE LOCKS The original stamped 7 valve lock served the industry well until drag racers discovered the Vasco Jet valve
More informationTOOLS TOOLS. 4 oz. Extreme Pressure Lube #3 The assembly lubricant preferred by top engine builders Can be used as a rod bolt lubricant
TOOLS 4 oz. Extreme Pressure Lube # The assembly lubricant preferred by top engine builders Can be used as a rod bolt lubricant 40 Extreme Pressure Lube # Manley Lube For Connecting Rod Bolts Provides
More informationMotorcycle cover images courtesy of Luke Leatherman
Motorcycle cover images courtesy of Luke Leatherman VALVE TRAIN COMPONENTS VALVES The standard of the industry since their inception, Manley valves are designed to outflow and outperform all others even
More informationRaceCeiver Required, NO other radios or communication equipment or mirrors allowed at any time.
RULES UCRA 602/SPORTSMAN SERIES Double file re-starts for the 2017 season RaceCeiver Required, NO other radios or communication equipment or mirrors allowed at any time. A. BODY RULE: same as super late
More informationOFF THE SHELF, IN YOUR ENGINE.
WISECO PISTONS OFF THE SHELF, IN YOUR ENGINE. - Engineering Excellence - In-House Forging - Precision Manufacturing - Quality Products Wiseco is your source for off-the-shelf performance pistons! With
More informationFord 4.6L (2V) SPECIFICATIONS
Ford 4.6L (2V) SPECIFICATIONS General Specifications Item Specifications Silicone Gasket and Sealant F7AZ-19554-EA WSE-M4G323-A4 Premium Engine Coolant VC-4A, VC-5 in Oregon, CXC-10 in Canada ESE-M97B44-A
More informationShort Block Contains. Long Block. Crankshaft Connecting Rods Pistons Camshaft Timing Gears. Same as short block plus. Cylinder heads Lifters Push Rods
Short Block Short Block Contains Crankshaft Connecting Rods Pistons Camshaft Timing Gears Long Block Same as short block plus Cylinder heads Lifters Push Rods Displacement Volume of all cylinders swept.
More information2018 Senoia Raceway Rulebook Limited Late Model
All drivers must adhere to the general rules, in addition to the division specific rules set forth below. Senoia Raceway Limited Late division allows four engine packages. A. 604 Crate Engine 2250lbs 8
More informationSTREET/STREET - FLAT TOP
Small-Block Mopar STREET/STREET - FLAT TOP Designed to fit most OEM open and closed chamber heads Will work with aftermarket Edelbrock & Indy heads Can be used with small nitrous applications Compression
More informationINSTALLATION INSTRUCTIONS AUTOMOTIVE PISTONS
Before balancing these pistons, be sure they are as you ordered. Used or altered parts cannot be returned for refund, credit or exchange regardless of the circumstances. In the event that your pistons
More informationRULE BOOK DISCLAIMER
RULE BOOK DISCLAIMER The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable requirements for such events. These
More informationMM HiFlo ST Engines. M42 & M44 Engines. 4 Cylinder Engines - M10. 6 Cylinder Engines - M30. M50, M50tu, S50, M52 & S52 Engines. Baby Six Engines - M20
MM HiFlo ST Engines 4 Cylinder Engines - M10 2002, 320i, 318i 85-4 Cyl SOHC Engines 2200 Rally Engine... 160 HP... 7995 1000 2100 FI Engine... 12 lbs 275 HP... 8995 1000 2000-2200 Race Engines..210-240
More informationLIMITED LATE MODEL. A. Standard Dirt Style body required. A stock appearing nose is required.
LIMITED LATE MODEL BODY: A. Standard Dirt Style body required. A stock appearing nose is required. B. Schaeffer Oil Southern nationals Body rules apply. C. See tech inspector if you have any questions.
More informationMM HiFlo ST Engines. 4 Cylinder Engines - M10. 6 Cylinder Engines - M30. Baby Six Engines - M20
MM HiFlo ST Engines 4 Cylinder Engines - M10 2002, 320i, 318i 85-4 Cyl SOHC Engines 2200 Sport Engine... 155 HP... 6495 800 2200 Rally Engine... 160 HP... 6995 800 2300 Rally Engine... 165 HP... 7995 800
More information165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster
165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster Head Torque---------------------------------------------65-70 Ft. Lbs. with 7/16 stud Pedestal Torque--------------------------------------------------25-30
More informationCB Super Race Cranks. Forged Chromoly Cranks ENGINE KITS & ENGINE PARTS Machined from an E4340 Chromoly forging!
CB Super Race Cranks Machined from an E4340 Chromoly forging! Chromoly steel is one of the strongest metals that can be used for the manufacture of crankshafts. Progressive dies are used in the forging
More information2018 Junior Sprint Rules
2018 KidSprint Engine Rules Briggs World Formula 2018B All parts must be Briggs & Stratton factory production parts unless otherwise noted in these rules. No machining, polishing or alteration of any parts
More informationPushrod Accessories & Rev Kits
Pushrod Accessories & Rev Kits PUSHROD GUIDE PLATES Crower s pushrod guide plates are specially hardened for added strength and durability. They are positioned on the rocker arm studs to guarantee proper
More informationDURATION IN DEGREES LOBE LIFT DURATION IN DEGREES LOBE LIFT
NOSTALGIA PLUS SOLIDS Like the Nostalgia Plus Hydraulics, these lobes are designed to mimic the sound of the great engines of the past while improving performance by applying today's design techniques.
More informationWorld Formula TECH MANUAL
World Formula TECH MANUAL Section 1 General Rules 1. Only stock Briggs & Stratton World Formula Model # 124435-8101 will be used in this class except as provided in this Tech manual. All parts will be
More informationKid Sprint Engine Rules Briggs World Formula
Kid Sprint Engine Rules Briggs World Formula 2017 Jr Sprint Engine Rules Briggs World Formula effective 2/1/2017. All parts must bebriggs & Stratton factory production parts unless otherwise noted in these
More informationPh: Fax:
JE Pistons opened its doors for business in 1947 with one simple objective, to supply the racing community with the highest quality pistons and components available in the marketplace. Although times,
More informationLavonia Speedway 2018 Racing Season
Lavonia Speedway 2018 Racing Season Stock 4 Cylinder- (Window Safety Net & Mufflers are Mandatory) (*note 2 engine combinations*) BODY - A. Stock auto only B. May have complete aluminum body C. Inner panel
More informationSurvival of the Fittest Piston and Rings Continue to Evolve, Larry Carley, Underhood Service, February 2001
Survival of the Fittest Piston and Rings Continue to Evolve, Larry Carley, Underhood Service, February 2001 Stronger, lighter, thinner, more durable. That pretty well sums up the changes that have been
More informationPISTONS FOR POWER. When it comes to pistons for a high-performance. Making More Power Reliably Through Pistons Technology [TECH] By Steve Dulcich
[TECH] PISTONS FOR POWER Making More Power Reliably Through Pistons Technology By Steve Dulcich When it comes to pistons for a high-performance engine, the average builder or enthusiast looks at a limited
More informationManley Valve Locks... simply the best! Conventional vs. Bead Loc Valve Stem Grooves
VALVE LOCKS Manley Valve Locks... simply the best! Conventional vs. Bead Loc Valve Stem Grooves The groove in a valve stem, seemingly unimportant, in reality is vital to the success of a valve s performance.
More informationINFORMATION SHEET Mopar A-8 Aluminum Race Engine Block PART NUMBER P AB, P AB, P , or P
Engine Block Components (1) Aluminum Engine Block (8) Cylinder Sleeves (installed) (1) Hardware Kit (1) Set of Main Caps (1) Set of Main Cap Fasteners Part Numbers Deck Nominal Max Over Part # Height Bore
More informationFrom The Track... To The Street!
Instruction Sheet For JIMS Twin Cam Flywheel Assemblies & Big Bore Kit For the following part numbers 1881, 1882, 1883, 1884, 1886, 1888, 1937, 1938, 1941, 1942, 1943, 1944, 1945, 1946, 1957, 1958, 1959,
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES REAR PARKING BRAKE KIT VENTED ROTOR TYPE (.50 OFFSET) BIG BEARING FORD, NEW STYLE PART NUMBER 0-70* WARNING INSTALLATION OF THIS KIT SHOULD ONLY BE PERFORMED
More information2015 STEEL HEAD LATE MODEL
RULE BOOK DISCLAIMER The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable requirements for such events. These
More informationWrist Pins. Stocking Wris Pins. NEW! New Stocking 4130 Piston Pins 4130 CHROME MOLY. Ph:
Wrist Pins 4130 CHROME MOLY 4130 G-Series Piston Pins (CONTINUED) Wall G-7872250155* 88 0.827 G-8272500155 104 G-8662500155 111 0.875 G-8752500155* 112 0.905 G-9052500155 117 0.906 G-9062500155 118 0.905
More informationGeneral Engine Rules Common to all Makes:
NEEDMORE SPEEDWAY 2017 CRATE LATE MODEL ENGINE RULES Engine in car must match manufacturer of body used. Example: Ford Thunderbird must run Ford Engine: Camaro must use Chevy Engine: Dodge Intrepid must
More information2018 BLUE RIDGE MOTORSPORTS PARK RULEBOOK LIMITED LATE MODEL
2018 BLUE RIDGE MOTORSPORTS PARK RULEBOOK LIMITED LATE MODEL The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable
More informationR-Series Cylinder Heads for Big Block Chevy
Overview Material TFS-41400004 A356-T6 Combustion Chamber Intake Port Exhaust Port Sizes 122cc 340cc 137cc 2.25 in. Intake, Springs 1.530 in. Dual Springs for Mechanical Flat Tappet and Hydraulic Locks
More informationThe Pro s choice for over 50 years!
100% forged and machined in the USA The Pro s choice for over 50 years! All VENOLIA Pistons are constructed from tried and proven 2618 T61 or 4032 T62 alloys. A billet is heated to 800 F and forged using
More information2019 SK Modified Open Engine Rules Supplement
2019 SK Modified Open Engine Rules Supplement 20E- 5 GENERAL ENGINE REQUIREMENTS Engine must be OEM cast iron V8 production block, or the Dart SHP Block. Cylinder heads must be OEM or Dart 10024266, and
More informationCylinder Head Comparison Sheet Big Block Mopar
Cylinder Head Comparison Sheet Big Block Mopar PowerPort Series Cylinder Heads for Big Block Mopar @.700" Valve Lift PowerPort 240 240cc Street 78cc -profiled 2.190" intake; 1.760" exhaust 334 cfm intake;
More informationHIGH VELOCITY HEADS PRODUCT CATALOG
HIGH VELOCITY HEADS PRODUCT CATALOG Over 45 years experience of cylinder head porting & design, intake manifold porting & design, AND carburetor spacer design. 6 14 16 SuperSuckers Cylinder Heads Manifolds
More informationNew SOLID ROLLER LIFTERS SOLID ROLLER LIFTERS. Elite Race Solid Roller Lifters. Elite Race Solid Roller Lifter Oiling Path
New Elite Race Solid Roller Lifters If you re looking for the ultimate lifter to withstand even the most demanding racing conditions, look no further. The COMP Cams Elite Race Solid Roller Lifters feature
More informationCATALOG JUL I
CATALOG 902-18 JUL 2018 ------- - I Performance Under Pressure Fel-Pro Performance gaskets deliver reliable sealing under grueling racing conditions. Proven winners in every form of motorsports! Oval track
More informationPBM PERFORMANCE PRODUCTS LIMITED ONE YEAR WARRANTY
LIMITED WARRANTY PBM PERFORMANCE PRODUCTS LIMITED ONE YEAR WARRANTY There is absolutely no warranty on the following: PBM Performance Products warrants that all of its products are free from defects in
More information#100 TO #199 SPORTSMAN 1600 LIGHT BUGGY TECHNICAL SPECIFICATIONS
#100 TO #199 SPORTSMAN 1600 LIGHT BUGGY TECHNICAL SPECIFICATIONS DEFINITION 1600 Light Buggy is a one-person, limited 4-wheel car using Volkswagen type 1 stock components with a 1585 cc engine. All parts
More informationE M1-M :0.03 A-B C M1, M2, M4, M
0 0.05 A-B 0.05 54.06±0.15 2.129±.006 127.83±0.15 5.033±.006 181.06±0.15 7.129±.006 265.82±0.15 10.466±.006 299.64±0.15 11.797±.006 304.70±0.15 11.996±.006 411.48±0.15 16.200±.006 J H G 51 +0.1 0 2.008
More informationSTREET BIG BLOCK CHEVY
WORLD CLASS ENGINES OPTIONAL ALL-ALUMINUM MERLIN ENGINE WEIGHS ONLY 471 LBS. 509&540 There s nothing quite as in-your-face as a big-inch rat motor. With a much larger displacement than any factory big
More informationHolley Ford 351W Hi-Ram Modular Intake Manifold Kits
Holley Ford 351W Hi-Ram Modular Intake Manifold Kits Holley P/N Engine Application & Induction Configuration 300-241 Hi-Ram, 1 x 95mm LS Throttle Body (longitudinal mount) w/ port EFI provisions & fuel
More informationSE120R SCREAMIN' EAGLE PRO RACE-USE CRATE ENGINE
-J007 REV. 00-09-08 SE0R SCREAMIN' EAGLE PRO RACE-USE CRATE ENGINE GENERAL Kit Number 90- Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES REAR PARKING BRAKE KIT VENTED ROTOR TYPE (.36 OFFSET) MOPAR 8-3/ / DANA 60 FOR USE W/GREEN () NON-ADJUSTABLE BEARINGS W/SNAP RING PART NUMBER 0-7* WARNING
More informationdial Bore gauge set deck Bridges 6'' stainless steel Calipers rocker stud remover 6'' digital Calipers top dead Center stop
415 dial Bore gauge set Used for checking cylinder bores, but is also useful for checking connecting rod bores for size, straightness or taper. Accurate to.0005. 15052 Dial Bore Gauge Set deck Bridges
More informationUNDERSTANDING ROD RATIOS
UNDERSTANDING ROD RATIOS By Larry Carley, Technical Editor lcarley@babcox.com Performance engine builders are always looking at changes they can make that will give their engine an edge over the competition.
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES REAR PARKING BRAKE KIT WITH.9 DIAMETER VENTED ROTOR (.36 OFFSET) BIG BEARING FORD PART NUMBER GROUP 0-739 INSTALLATION OF THIS KIT SHOULD ONLY BE PERFORMED
More informationQF PERFORMANCE CATALOG
QF17-07 2017 PERFORMANCE CATALOG www.qualcast.com www.ymme.biz QualFast Table Of Contents Component (Prefix) Page Street Performance Valves (53-)... 1 Racing Valves (12-)... 3 Sport Compact High Performance
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES REAR PARKING BRAKE KIT VENTED ROTOR TYPE (.8 OFFSET) BOLT CHEVY PART NUMBER 0-7* WARNING INSTALLATION OF THIS KIT SHOULD ONLY BE PERFORMED BY PERSONS EXPERIENCED
More information25563_Mahle_HiRes.ps - 2/22/2008 8:53 AM 2008 Racing Components
2008 Racing Components With an 80 plus year history of innovation and racing experience, MAHLE is the global leader in forged piston technology. Today, MAHLE pistons are powering champions in NASCAR, World
More informationKWIK SHOP GENERAL PREDATOR RULES 2019
GENERAL PREDATOR RULES 2019 These rules are intended to keep the engine as Stock Out Of The Box as possible. There are no gray areas. If they do not specifically state that something is allowed, it will
More informationIndividual Competitors:
Attached are the Vehicle Technical Specification (VTS) sheets that you requested. They are quite self-explanatory. Please complete and return them to the Club Racing Technical Department along with a letter
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES REAR PARKING BRAKE KIT VENTED ROTOR TYPE (.8 OFFSET) BOLT CHEVY PART NUMBER GROUP 0-7 INSTALLATION OF THIS KIT SHOULD ONLY BE PERFORMED BY PERSONS EXPERIENCED
More informationHolley GM LS1/2/6, LS3, and LS7 Hi-Ram Modular Intake Manifold Kits
Holley GM LS1/2/6, LS3, and LS7 Hi-Ram Modular Intake Manifold Kits Holley P/N Engine Application & Induction Configuration 300-112 LS3 Hi-Ram, Carbureted, 2 x 4500 Dominator, 2 throttle bores (sideways
More informationFORD 351W Small Block Technical Notes
DART FORD 351W Small Block Technical Notes Deck Height 9.200 & 9.500 Bore 4.00 or 4.125 unfinished Main Bearing Size 302 (2.249 ) & 351C (2.749 ) Weight. 9.200 190 lb / 9.500 195 lb Maximum bore 4.185
More informationLOBE RATED DURATION IN LOBE TAPPET LIFT THEORETICAL VALVE 0 Lash CAMSHAFT TYPE NUMBER DURATION DEGREES TDC ROCKER ARM RATIO
A look into the COMP Cams Master Lobe Library Since 1977, COMP Cams main goal has been to be the best in camshaft design and technology. The techniques and ideas incorporated in our camshaft designs have
More informationOUTBOARD INTERNAL ENGINE PARTS
s All oil filters are not created equal. Mallory Marine oil filters are designed to meet the requirements of the marine engines they are engineered to protect. Oil Filter Features: OUTBOARD High efficiency
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Year and Model: 2012/2013 Chevy Sonic General Motors This draft of the listed vehicle s VTS is posted with the specifications that we currently have
More information2018 Alfa Romeo Giulia SPECIFICATIONS
2018 Alfa Romeo Giulia SPECIFICATIONS All dimensions are in inches (millimeters) unless otherwise noted. Information shown is correct at time of publication and is subject to change. GENERAL INFORMATION
More informationUltra Street 2017 Rules
Ultra Street 2017 Rules www.mdra275.com BODY: Fiberglass/Carbon body panels are limited to hood, rear deck lid, fenders, doors, and bumpers. Cowl hoods may not be taller than half way point of the windshield.
More informationGY6 BIG BORE KIT AND TOP END REBUILD GUIDE
GY6 BIG BORE KIT AND TOP END REBUILD GUIDE 1 The following is a general guide for installing a big bore kit OR rebuilding the GY6 type engine. The photographs in this booklet are installing an 80cc bore
More information2013 Senoia Raceway Rulebook
2013 Senoia Raceway Rulebook E-mail tech questions to: johnnywalls31@yahoo.com BOMBER RULES BODY 1. All bodies must be stock steel bodies. No fiberglass or aluminum body panels allowed. Fenders and quarter
More informationIGNITION ACCESSORIES COIL COVERS COIL BRACKET CHROME TOP HAT WIRE RETAINER CHROME PLATED VACUUM ADVANCE COVER SPARK PLUG BOOT INSULATORS 6012G
IGNITION ACCESSORIES COIL COVERS Chrome plated steel coil covers feature universal design to accept most stock coils. Includes chrome plated mounting bracket. Universal Coil Cover, horizontal mount...9777
More informationOIL PUMP 21mm 26mm 30mm 32mm Dry sump Plugged for full flow Maxi pump O ring Hard anodized Aluminum Cast iron
CASE Case material /Alloy Serial number Head stud 8mm 10mm Case savers Yes No Head stud material Length Crank bore depth Right Left Main bore diameter @ 25 ft lb Cam bore depth Right Left Right Cam thrust
More information2018 Senoia Raceway Rulebook Late Model Sportsman
(Formerly B Cadet) All drivers must adhere to the general rules, in addition to the division specific rules set forth below. BODY 1. Stock appearing body may be aluminum or steel. 2. Rear of body may be
More informationTORC SERIES COMPETITION RULES FOR SPORTSMAN 1600 BUGGY
TORC SERIES COMPETITION RULES FOR SPORTSMAN 1600 BUGGY DEFINED AS- A limited 4-wheel vehicle utilizing a type-1, 1600 c.c. Volkswagen air-cooled engine with one person in the vehicle. Division rules supersede
More information4. Hickory little engine: 3000/1350 lbs. with driver. (3050/1375 with 500 gram pistons).
2018 Limited Late Model Stock Rules $1000 fine for tire soaking $100 fine for antifreeze The Limited Late Model Limited Division will run under the 2018 NASCAR Whelen All American Series Late Model Stock
More informationSUPER STOCK RULES *** Please refer to General Section for rules and regulations applicable to all divisions***
1 SUPER STOCK RULES *** Please refer to General Section for rules and regulations applicable to all divisions*** CAR ELIGIBILITY: Any American Made 1955-1992 standard production automobile allowed minimum
More informationTHE LEADER IN HIGH PERFORMANCE CRANKSHAFTS CONNECTING RODS ROTATING ASSEMBLIES
THE LEADER IN HIGH PERFORMANCE SHAFTS CONNECTING S ROTATING ASSEMBLIES 34 TH EDITION V2 THE LEADER IN INNOVATION & INGENUITY FROM STOCK REPLACEMENT TO CUSTOM BILLET SHAFTS With over 50 years of manufacturing
More informationLifters - Mechanical Roller
Mechanical Roller Lifters Crane roller lifters are the standard by which all others are judged. From our first horizontal locking bar version, with patented roller shield body, to our latest Ultra Pro-
More informationQT-302FA FORD 302 MODIFIED 3.400" STROKE CHEVY RJ 5400CC* $ QT-302FB FORD 302 MODIFIED 3.250" STROKE 5400 $
ITEM NO. DESCRIPTION (PRICES ARE FREIGHT INCLUDED) ROD PRICE **Notice** All cast cranks are to be discontinued when sold out. NO RETURNS! Replace only for defective. CRANKSHAFT- NODULAR IRON 80-60-06 QT-526
More informationHOW BENDS ARE MEASURED EXAMPLES BEND INFORMATION. The degree of a bend may be measured with either a protractor or an angle finder.
HOW BENDS ARE MEASURED EXAMPLES The degree of a bend may be measured with either a protractor or an angle finder. 90 OBTUSE ANGLE 45 135 DEGREE OF BEND 45 A B 0 BEND INFORMATION 180 The bend radius is
More informationDRIVER ELIGIBILITY GUIDELINES TO RACE CLASSES
SPORTSMAN RULES DRIVER ELIGIBILITY GUIDELINES TO RACE CLASSES Any DRIVER that has won a CRATE / Limited/ Super Late Model Feature event at Boyd's Speedway in 2017 cannot register to race in any class lower
More informationPART NUMBERS SPECS FEATURES OPTIONS R260RE-13 R270RE-13 R280RE-13 R283-5RE-13 R286RE-13 R295-RE-13 R305-RE-13 AND MIDGET SPECIALS
SPECS Intake port: 260-320 cc Chamber volume: 50 cc Intake valve diam.: 2.180-2.250 Exhaust valve diam.: 1.600-1.650 Valve length: 5.950-6.050 PART NUMBERS R260RE-13 R270RE-13 R280RE-13 R283-5RE-13 R286RE-13
More information2008 Vehicle Technical Specifications
Vehicle Manufacturer: Year and Model: Chevrolet (1997 2004) C5 / Z06 Corvette This specifications form was developed by SCCA Pro Racing and will be used by the Series Technical Administrator to establish
More informationALL Gen III heads are inter-changeble. However, they need to be matched up with the proper engine combo to see any gains.
ALL Gen III heads are inter-changeble. However, they need to be matched up with the proper engine combo to see any gains. Here is a list of a known production casting #'s: 933 97 aluminum perimeter bolt
More informationGASKETS ENGINE OVERHAUL GASKET KITS ENGINE REBUILD OVERHAUL GASKET KITS MAKE ENGINE YEAR PART NO.
ENGINE REBUILD OVERHAUL GASKET KITS Designed for stock, non-high performance engine rebuilds Engineered to meet or exceed OE gasket and seal specifications Overhaul gasket kits include all gaskets and
More informationBriggs & Stratton Animal TECH MANUAL Version 1.6 Section 1 General Rules cannot Section 2 Required Modifications Section 3 Allowable Modifications
Briggs & Stratton Animal TECH MANUAL Version 1.6 updated 2/ 7 / 2011 Section 1 General Rules 1. Only stock Briggs & Stratton Animal # 124332-8201and 124332-8203 - 01engine will be allowed in this class.
More informationPRSRT STD PAID V8 and FORD 4 CYL
V8 and FORD 4 CYL discount catalog - 2009 V8 PISTONS - GREAT VALUE! PRO STAR FLAT TOP PISTONS 4 EYEBROW 350 ULTRALIGHTS (RA-PS4350M).....................................$539.00 As light as 385g. Up to
More informationENGINE MECHANICAL <2.0L ENIGNE>
11A-1 GROUP 11A ENGINE MECHANICAL CONTENTS GENERAL DESCRIPTION......... 11A-2.................. 11A-3 11A-2 This model is equipped with a newly developed 4B11 engine. It is a 4-cylinder,
More informationM-6007-A50NA Engine Specifications and Owner's Manual
M-6007-A50NA Engine Specifications and Owner's Manual Fordracingparts.com Techline 1-800-367-3788 Page 1 of 11 IS-1850-0377 Please visit www.fordracingparts.com for the most current instruction information.!!!
More information"XLS" Series 5 H.P. BRIGGS & STRATTON. Supplied with rings, circlips & lightweight wrist pin
5 H.P. BRIGGS & STRATTON "XLS" Series The same race winning design and manufacturing technology that is applied to Wiseco s NASCAR piston program has been incorporated into our "XLS" Series 5HP Briggs
More informationPure Stock Specifications
15112 National Pike, Hagerstown, MD 21740 PHONE (301) 582-0640 FAX (301) 582-3618 info@hagerstownspeedway.com Pure Stock Specifications ENGINES A.) Solid lifter cams allowed. No rollers B.) Roller Rockers
More informationUSST National Engine Rule Set (2010)
USST National Engine Rule Set (2010) The USST National Series combines trucks from many different origins and blends them into a racing class that includes their different features. With the high expense
More informationELIGIBLE YEAR MODELS AND BODY STYLES
Class Description Nostalgia Super Stock class is for the year models, body styles, and engine combinations, which accurately represent those cars, which raced in the AF/X & Super Stock classes of the 60s
More information2018 Alfa Romeo Giulia SPECIFICATIONS
2018 Alfa Romeo Giulia SPECIFICATIONS All dimensions are in millimetres (inches) unless otherwise noted. Information shown is correct at time of publication and is subject to change. GENERAL INFORMATION
More informationCrisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Super Street Class
Crisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Super Street Class Page 1 of 6 2017 Super Street Rules Vehicle 1. Any 1960 or newer sedan. 2. Chassis and suspension must remain completely
More information1998 Saab 900 SE ENGINES Saab 2.0L & 2.3L 4-Cylinder
Removal & Installation See VALVE SPRINGS under CYLINDER HEAD under OVERHAUL. CAMSHAFT Removal 1. Rotate crankshaft until "0" mark on flywheel aligns with timing mark on flywheel cover. Remove inspection
More information2007 WORLD CHALLENGE SEASON
2007 WORLD CHALLENGE SEASON VEHICLE MANUFACTURER: YEAR & MODEL: Ford Focus Coupe This specifications form was developed by SCCA Pro Racing and will be used by the Series Technical Administrator to establish
More informationcarbureted evo press flywheel kits
carbureted evo press flywheel kits Use on 1970-1984 Shovelhead or 1984 1999 Evolution These instruction are for the following part numbers: 1972,1973,1974,1976,1977,1978, 1979,1980,1981,1982,1983,1984,1985,1986,1987.
More information