K-Motion Valve Springs are the choice of winning racers. K-Motion

Transcription

1 K-Motion Valve Springs are the choice of winning racers. K-Motion Valve Springs deliver the highest quality along with the superior dependability that s needed to meet today s performance requirements. Whether you run on the drag strip, circle track, off-road or on the water, K-Motion Valve Springs offers you winning performance.

2 K-Motion is the overwhelming choice of winning racers. They know that K-Motion Valve Springs deliver the high quality and superior dependability required to meet their performance requirements. Whether you run on the drag strip, circle track, off-road, or on the water, K-Motion Valve Springs can offer you the same performance to deliver you to Winners Circle too. K-Motion Valve Springs start with the highest quality wire available. All four alloys used are manufactured and inspected to the highest industry standards. Quality wire is the first essential step in manufacturing springs designed for extreme, high, aggressive cam lifts and ram speeds. Metallurgists measure a material s resistance to failure with fracture toughness. This, combined with the material s strength, determine whether or not a material is a suitable choice for a specific application. This is why K-Motion Valve Springs utilize four different alloys. For each application, only the right material is selected. After coiling, the springs receive a variety of carefully controlled heat treatment and surface finishing processes. All of these are intended to reduce load loss and increase spring life. Each spring is then visually inspected for surface imperfections, which could lead to early breakage. The dampers are radius ground and depointed for longer spring life. Each K-Motion Valve Spring assembly is then cold pressed with as much as 2500 pounds of pressure, depending on the application. A pink stripe is added for identification, and then each spring is individually pressure checked and boxed with no more than five pounds variation per box. From design to manufacturing to load-matching spring sets, every effort is made to provide you the very best valve springs available. When you need valve springs, demand the very best K-Motion Valve Springs.

3 K-MOTION VALVE SPRING APPLICATIONS K-700 K-750 K-775 K-775S K-775T K-800 K-850 K-900 K-950 K-975 K-975H K-1000 K-1000H K-1100 K-1150 K-1200 K-1400 K-1500 K-1600 K-1650 K-1700 K-1900 K diameter single M-200 spring good for camshafts up to.500 lift , 1.150, coil bind at diameter single M-300 spring good for camshafts up to.610 lift , 1.150, coil bind at diameter double M-300 spring designed for LS engines, good for camshafts up to.660 lift , 1.180, coil bind at Drop in kit for K-775 for LS engines, includes K-775 valve springs, steel retainers, locks, locators, and valve seals. Drop in kit for K-775 for LS engines, includes K-775 valve springs, titanium retainers, locks, locators, and valve seals diameter double M-300 spring good for camshafts with up to.700 lift , 1.200, coil bind at diameter double M-300 spring with damper good for flat tappet camshafts up to.630 lift , 1.250, coil bind at diameter double M-400 spring with damper good for camshafts up to.700 lift , 1.200, coil bind at diameter double M-400 spring with damper good for camshafts up to.750 lift , 1.300, coil bind at diameter double M-500 spring good for camshafts up to.850 lift , 1.200, coil bind at diameter double M-500 spring good for camshafts up to.900 lift , 1.200, coil bind at diameter double M-400 spring with damper good for camshafts up to.750 lift , 1.200, coil bind at diameter double M-400 spring with damper good for camshafts up to.850 lift , 1.200, coil bind at diameter double M-300 spring with damper good for camshafts up to.640 lift , 1.250, coil bind at diameter double M-300 spring with damper good for camshafts up to.700 lift , 1.250, coil bind at diameter double H-11 spring good for camshafts up to.790 lift , 1.250, coil bind at diameter triple H-11 spring good for camshafts up to.990 lift , 1.250, coil bind at diameter triple H-11 spring good for camshafts up to.850 lift , 1.200, coil bind at diameter double M-300 spring with damper good for camshafts up to.640 lift , 1.250, coil bind at diameter double M-300 spring with damper good for camshafts up to.725 lift , 1.250, coil bind at Ideal for NASCAR and large solid lifter camshafts diameter triple H-11 spring good for camshafts up to.840 lift , 1.250, coil bind at diameter double M-500 spring good for camshafts up to lift , 1.250, coil bind at diameter triple M-500 spring good for camshafts up to lift , 1.250, coil bind at Denotes new part number 3 To transmit an order to the K-Motion fax line, dial (765) or at sales@k-motion.biz

4 K-MOTION VALVE SPRING DATA Part Number Size Pressure Material Coil Bind Rate K M K M K M K M K M K M K M K M K-975H M K M K-1000H M K M K M K H K H K H K M K M K H K M K M For ordering information, call (800) or (765)

5 VALVE LOCKS, LASH CAPS AND RETAINERS K-Motion Valve Locks K-Motion Valve Locks are fully machined, heat treated locks, that feature the more desirable 10 angle to help eliminate the pull through problem associated with standard 7 locks. K mm diameter Bead Loc for 7 retainer, standard height. K /16 diameter with recess for lash cap, standard height. K /32 diameter with recess for lash cap, standard height. K /8 diameter with recess for lash cap, standard height. K /32 diameter without recess for lash cap, standard height. K /32 diameter without recess for lash cap,.050 additional height. K /8 diameter without recess for lash cap,.050 additional height. K /32 diameter Bead Loc, standard height. K-Motion Lash Caps K-Motion Lash Caps are precision machined, heat-treated caps, designed to correct and help maintain valve train accuracy. K /16 diameter,.080 thick. K /32 diameter,.080 thick. K /8 diameter,.080 thick. K-Motion Titanium Retainers K-Motion Titanium Retainers are manufactured from premium quality, high strength titanium. As added features, these lightweight retainers offer an additional.050 installed height over a standard retainer and are designed to be used with 10 locks. K-7290 Designed to be used with the K-775 K-Motion Valve Springs with a 7 lock, standard height. K-7300 Designed to be used with the K-800 K-Motion Valve Springs. K-7320 Designed to be used with the K-850, K-900, K-950, K-1100, K-1150, K-1600, and K-1650 K-Motion Valve Springs. K-7330 Designed to be used with the K-1000 and K-1000H K-Motion Valve Springs. K-7340 Designed to be used with the K-975, K-975H, and K-1900 K-Motion Valve Springs. K-7350 Designed to be used with the K-1200 K-Motion Valve Spring K-7380 Designed to be used with the K-1400, K-1500, and K-1700 K-Motion Valve Springs K-7390 Designed to be used with the K-2000 K-Motion Valve Springs. K-Motion Steel Retainers K-Motion Steel Retainers are machined from high quality steel, heat-treated and black oxide coated to provide maximum durability. These high strength retainers resist the spring abrasion so common in oval track and endurance applications. K-7400 Designed to be used with K-800 K-Motion Valve Springs and 10 locks. K-7410 Designed to be used with K-850, K-900, K-950, K-1100, K-1150, K-1600, and K-1650 K-Motion Valve Springs and 10 locks. K-7420 Designed to be used with the K-700 and K-750 K-Motion Valve Springs and 7 locks. K-7490 Designed to be used with the K-775 K-Motion Valve Springs with a 7 lock, standard height. K-7500 Designed to be used with the K-700 and K-750 K-Motion Valve Springs and 10 locks. 5 To transmit an order to the K-Motion fax line, dial (765) or at sales@k-motion.biz

6 DIMENSIONAL DATA K-MOTION INSTALLATION INFORMATION Part Number Outer O.D. Outer I.D. Inter I.D. Inner I.D. K K K K K K K K K-975H K K-1000H K K K K K K K K K K INSTALLED HEIGHT In order to properly determine installed height for a given application, two figures must be known. First the coil bind height of the spring you are going to use. Second the valve lift with the current camshaft and rocker arm combination. To these figures, add coil bind clearance. We strongly recommend that a minimum of.060 be used for this figure. To illustrate this method of determining the correct minimum installed height, see the example below. A B C D Part Number A B C D K K K K K K K K K K K K K This dimensional information is provided for reference purposes only. For a combination using a K-1000H valve spring with.800 valve lift Coil Bind Height Valve Lift.800 Coil Bind Clearance.060 Installed Height In this case, would be the minimum installed height. Note that this is a minimum figure. Operating with a shorter installed height will severely shorten the life of the springs and may lead to breakage of the springs and related valve train components. For ordering information, call (800) or (765)

7 K-MOTION VALVE SPRING PRESSURE DATA K-700 K-750 K-775 K-800 K-850 K-900 K-950 K-975 K-975H K-1000 K-1000H Height Load (lb) Load (lb) Load (lb) Load (lb) Load (lb) Load (lb) Load (lb) Load (lb) Load (lb) Load (lb) Load (lb) K-1100 K-1150 K-1200 K-1400 K-1500 K-1600 K-1650 K-1700 K-1900 K-2000 Height Load (lb) Load (lb) Load (lb) Load (lb) Load (lb) Load (lb) Load (lb) Load (lb) Load (lb) Load (lb) To transmit an order to the K-Motion fax line, dial (765) or at sales@k-motion.biz

8 K-MOTION INFORMATION, TERMS & POLICIES General Information Sales and technical personnel are available from 8:00 A.M. to 5:00 P.M. Monday through Friday. Orders can also be transmitted, 24 hours a day, to our FAX machine at (765) or by at sales@kmotion.biz. Shipping All packages are sent via United Parcel Service or Federal Express. All UPS and FedEx service options are available. Terms Payment for merchandise can be made with Visa, Mastercard, or Discover. All C.O.D. shipments will be restricted to money order, cashier s check or certified check unless prior arrangements have been made. Merchandise Returns Any merchandise returned to K-Motion must have prior approval. All returns must be sent freight prepaid. A copy of the bill of sale as well as a complete description of the reason for the return must accompany all returns. Merchandise can be returned for credit only. No cash refunds will be made. A 20% restocking fee will be applied to all returned merchandise. Damaged Merchandise K-Motion ships all merchandise carefully packaged and in good condition. All shipments are insured. All claims for damaged merchandise must be made with the carrier. All packaging materials must be presented to the carrier with a claim. Do not return damaged merchandise to K-Motion without prior approval. Miscellaneous K-Motion reserves the right to change the specifications, designs and materials for, or remove from availability, any item listed in this catalog without notice. Prices are subject to change without notice. Prices do not reflect shipping or handling charges. Every effort has been made to ensure the accuracy of the information presented in this catalog and K-Motion cannot be responsible for typographical errors. Warranty Disclaimer Due to the nature of performance applications, the parts in this catalog are sold without any express warranty or any implied warranty of merchantability, or fitness for a particular purpose. K-Motion Valve Springs shall not, under any circumstances be liable for any special, incidental or consequential damages, including, but not limited to, damage, or loss of property or equipment, loss of profits or revenue, cost of purchased or replacement goods, or claims of customers of the purchase, which may arise and/or result from sale, installation or use of these parts. Installation of these parts could adversely affect the vehicle manufacturer s warranty coverage. This disclaimer is subject to applicable state laws. K-Motion Valve Springs 4014 Farmington Drive North Lafayette, Indiana Telephone (765) FAX (765) Order Desk (800) sales@kmotion.biz Website: