ASM Shank Type (Short / Long)
|
|
|
- Alban Quinn
- 5 years ago
- Views:
Transcription
1 No
2 Indexable illing oo S Shank ype (Short / ong) Q max High Efficient Jet ir Hole oughing Semi-Finishing Finishing HC No. of eeth 1 ~ 5 d1 lb Undercut type d1 lb olerance : aximum torque on screw: -0.1 / Nm Short ong Shank ype I Code Item Code Flutes lb d 1 Shape Inserts FH116 S-0708S FH117 S-0710S FH118 S-0712S FH119 S-0714S Undercut type FH120 S-0716S J FH121 S-0717S Undercut type E (-) FH122 S-0720S FH123 S-0721S Undercut type FH124 S-0716S FH125 S-0720S S odular Q max High Efficient Jet ir Hole oughing Semi-Finishing Finishing HC No. of eeth 1 ~ 8 E C d 2 d 1 H with irhole olerance : aximum torque on screw: -0.1 / Nm out irhole irhole odular ype I Code Item Code Flutes H d 1 d 2 C E Inserts FH126 S FH127 S FH128 S J FH129 S E (-) FH130 S FH135 S FH136 S C Hitachi ool Engineering Europe GmbH
3 Indexable illing oo INSES S/HU ini E Standard ype E ow-force breaker type Insert with 2.0 mm corner for low-depth, high-feed-rate cutting (a p max = 0.3 mm) J J C Coated Insert with 2.0 mm corner for low-depth, high-feed-rate cutting (a p max = 0.3 mm) Soft arget Hardness of Workpiece Hard olerance Grade Size Shape I Code Item Code Class J4060 WF663 E ow-force type WF664 E WF709 E WF710 E WF711 E WF712 E ow-force type J4060 J Coating JP Coating PV Coating / ry Cutting Insert with 5 mm fl ute length for shoulder cutting (a p max = 5.0 mm) Insert with 5 mm fl ute length for shoulder cutting (a p max = 5.0 mm) Soft arget Hardness of Workpiece Hard olerance Grade Size Corner- I Code Item Code Class S10 J4060 PH30E WF665 J WF666 J WF671 J WF667 J WF668 J WF672 J WF669 J WF670 J WF673 J WF689 J WF690 J WF691 J WF692 J WF693 J WF694 J S10 J4060 PH30E C Coating J Coating H Coating JP Coating PV Coating / ry Cutting Parts Clamp Screw Wrench I-Code Item-Code I-Code Item-Code E E C Hitachi ool Engineering Europe GmbH 3
4 Indexable illing oo S/HU ini Insert grade target material Interrupt ild steel ~ Hardened steel achining situation J4060 PH30E Interrupt Work Hardness (HC) Cast iron Interrupt Stainless luminium achining situation J4060 PH30E achining situation J4060 S10 Soft Hard Soft Hard C Hitachi ool Engineering Europe GmbH
5 d d d dn dn dn d d d d d d ype ype ype ype ype ype ype C ype C ype C dn dn d10/d12 d10/d12 without d10/d12 irhole without without irhole irhole SC Carbide Shanks for odular il d10/d12 d10/d12 without d10/d12 irhole without without irhole irhole Carbide Shank I Code Item Code 2 1 dn dn 2 d ype FH137 SC FH254 SC FH255 SC out FH138 SC irhole FH139 SC FH256 SC C FH257 SC FH140 SC FH141 SC FH258 SC FH142 SC C FH260 SC FH259 SC FH143 SC FH261 SC Z C FH144 SC FH262 SC Z FH263 SC Z C 270 FH264 SC Z 220 irhole FH145 SC FH146 SC FH265 SC FH266 SC FH268 SC FH267 SC FH147 SC FH269 SC FH148 SC FH270 SC SUPE ock milling chucks or shrink-fit holders can be used. SUPE ock ufnahmen oder Schrumpffutter können verwendet werden. ptos para amarrar en portapinzas SUPE ock. es attachements SUPE ock peuvent être utilisés. Cones hidráulicos de grande aperto e aperto térmico podem ser usados. Possono essere utilizzati mandrini a forte serraggio SUPE ock. S Steel Shanks for odular il Steel Shank I Code Item Code 2 1 dn dn 2 d ype FH131 S FH132 S FH133 S C FH134 S FH271 S FH272 S SUPE ock milling chucks can be used. SUPE ock ufnahmen können verwendet werden. Possono essere utilizzati mandrini a forte serraggio SUPE ock. ptos para amarrar en portapinzas SUPE ock. es attachements SUPE ock peuvent être utilisés. Cones hidráulicos de grande aperto e aperto térmico podem ser usados. out irhole irhole For further information about modular chucks please see our brochure Indexable odular Series No Weitere Informationen über modulare Werkzeugaufnahmen finden Sie in unserem Prospekt: Indexable odular Series No Para obtener más información sobre conos modulares consulte nuestro folleto Indexable odular Series No Per maggiori informazioni riguardanti la gamma dei mandrini avvitabili consultate il catalogo Indexable odular Series No Pour de plus amples informations concernant les attachements modulaires, voyez SVP notre brochure Indexable odular Series No Para mais informações sobre Cones odulares consulte o nosso folheto Indexable odular Series No HSK 63 IN HSK SK 40 IN lways up to date: Please check our P QuickFinder Itterpark Hilden Germany Phone +49 (0) Fax +49 (0) E-ail info@mmc-hitachitool-eu.com Internet by C Hitachi ool Engineering Europe GmbH 4th Edition Printed in Germany H S-6.5 W-S
Hitachi Tool Engineering Europe GmbH. No
Hitachi Tool Engineering Europe GmbH No. 324.2 Indexable illing Too S The new S/HU ini has 2 kinds of insert shapes and applications: JDT type insert for 90 cutting JDT Schneidplatte für 90 earbeitungen
Hitachi Tool Engineering Europe GmbH. No
Hitachi Tool Engineering Europe GmbH No. 324.3 Inexable illing Too AS The new AS/AHU ini has 2 kins of insert shapes an applications: JDT type insert for 90 cutting JDT Schneiplatte für 90 Bearbeitungen
8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332
8 Sizes of Body Equal Pitch & Un-Equal Pitch 7 Insert Grades 3 Types of Chip Breaker No. 332 AFE45 Face Mill Q max High Efficient Jet Air Hole Roughing Semi-Finishing HRC 60 No. of Teeth 4 14 d 2 d 2 d
Indexable Milling Tools
No. 315.4 Short Name Type: CRBIE Page Ba High Precision Finish - Carbide Shank Reguar BPF-W 8 5 4 BPF-W Ba High Precision Finish - Carbide Shank ong Neck 8 1 4 BPF-WE Ba High Precision Finish - Carbide
Double Gash achieves perfect balance with rigidity and chip evacuation. It guarantees high performance in vertical and horizontal milling.
No. 439 EPSM-W-PN Epoch Multi Double Gash achieves perfect balance with rigidity and chip evacuation. It guarantees high performance in vertical and horizontal milling. Conventional single gash type EPSM
ALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL
90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low
Super Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E
Super Radius Mill type Super Radius Mill type New Product News No.1604E-4 2017-10 Te c h n o l o g y JM4160 Stainless steel Pat. No.5967330 JS4045 GX2140 Carbon steel Alloy steel Features JP4120 Pre-hardened
SC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
Improved Grooving Performance with Expansive Tooling System Lineup
KGD/KGDF Grooving / Cut-Off Improved Grooving Performance with Expansive ooling System ineup Good Chip Control EGACOA Coating echnology for ong ool ife and igh Efficiency achining Comprehensive ineup KGD
HSK F80 MAKINO S HRINK FIT C H UCK S
Haimer F80 Makino 4.5 HSK F80 MAKINO S HRINK FIT C H UCK S M6 Thread for balancing screws D1 D2 CERTIFICATE OF QUALITY A 10mm L Adjustable back-up screw with fl ats for coolant drainage from diam. 1/4
FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
CCW. φ90. 6,000min -1. φ119 ー M 4 M 4 21 ー M 5 M 5 ー M 6 M 6 ー M 8 M 8 TA 6 ー M 3 M HFT 6 ー M 4 M 4 22 HUT 6 ー M 5 M 5 HFT12
AF 90 rill ndmill Fig. 1 F7 ( ) F7 φ=1 7 68 60 ( 55 ) 42 ( 46 ) φ72 Fig. 2 4,000min Fig. 4 Fig. 6 4,000min F12 FA20 FT6 78 59 59 62 4,000 min 5,000min 4,000min 29 29 φ=2.5 13 φ=5.8 20 φ=3 12 58 Fig. 3
Shrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
TR4D. High Feed Radius Mill. New Product News No. H1901A
TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel
Modules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels
Standard programme. Multi-bladed reamers and counterboring tools. The tool specialists for the trade.
Standard programme Multi-bladed reamers and counterboring tools The tool specialists for the trade. 2 STANDARD PROGRAMME Introduction Welcome to the world of precision! Founded in 1906 by August Beck as
-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
SA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
MPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE
NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE NEW HIGH PERFORMANCE SOLID CARBIDE DRILL PRODUCTIVITY Increase productivity with
Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
MHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
TOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G
TOOLS NEWS 216.1 Update B25G Carbide end mills MS plus Series Series Expansion Tough applications require ''Plus'' performance Carbide end mills MS plus General purpose end mill optimized ''plus'' performance.
Burrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
HIGH SPEED ALUMINIUM MACHINING WITH ULTRA HIGH METAL REMOVAL & EXCELLENT SURFACE FINISH
IG EED ALUIIU ACIIG WIT ULTRA IG ETAL REOVAL & EXCELLET URFACE FII teel ardened teel tainless teel RA s Cast Iron on Ferrous TE O. 1 ILLIG YTE FOR ALUIIU, COER, LATIC & BRA, OFFERIG IRROR FII ULTRA IG
Carbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End
Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design
MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
Heat Resistant Alloy. D1 Tolerance D4 Tolerance. Drill Dia.
SL Standard margin type Hardened Steel Stainless Steel e e e u u a From 2 3 l/d hole depth. a SL standard margin type for accurate and reliable drilling. a All drills with through coolant holes as standard.
PCD & CBN TANGENTIAL MILLING
& TANGENTIAL MILLING CONTENTS Highlights 4 Codifiy 6 Shell Type 7 Cylindrical Type 8 Monoblock Type 9 Inserts 12 Adaptors 18 Setting Procedures 24 Spare Parts 26 Cutting Parameters 31 HIGHLIGHTS HIGHLIGHTS
HPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System
HPI - PIONEER Premium Holding & Work Holding SG - Second Generation Holding System The Pioneer Group We have been in the metal cutting industry for over three decades and contributed to the progress of
HIGH PRECISION HIGH PERFORMANCE
Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility
HOPPERTOP TECHNICAL CATALOGUE HOPPERTOP. Weigh HOPPER venting filter SMALL FOOTPRINT
EN Weigh HOPPER venting filter TECHNICAL CATALOGUE SMALL FOOTPRINT Manual No. FIL.053..T.EN Issue: A Latest Update: 08/0 ORIGINAL INSTRUCTIONS IN ENGLISH WAM S.p.A. Via Cavour, 338 4030 Ponte Motta Cavezzo
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
B182E VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOYS
VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOY 2018.04 B182E VFX5/6 ERIE UNPARALLELED CHIP EJECTION PROPERTIE HELP RE-DEFINE THE PARAMETER FOR MACHINING TITANIUM ALLOY HIGH RIGIDITY DEIGN
AQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
KGD for Automatic Lathe
Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535
Type2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A
CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors
HSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER...
(IN 69893) A50 A63 A100 COET CHUCK HOER Standard ength...6 Extended ength...7 Mini Nuts...8 TAPPING COET CHUCK HOER......... 9 SHRINK FIT HOERS...10 SIE OCK HOER Standard ength...12 Extra ong...13 FACE
INDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits
INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...
DIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER...
IN 69871 SK40 SK45 SK50 COET CHUCK HOER Standard ength...44 Extended ength...45 Short...46 TAPPING COET CHUCK HOER........ 47 SHRINK FIT HOER...48 SIE OCK HOER Short & Standard ength...49 FACE MI ARBORS...50
Reduced Chip Biting Issues when Grooving Small Parts
Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application
HSK-T TOOLING SYSTEMS for TURNING MILL. World standard ISO. for Turning Mill SET SCREW HOLDERS FOR ROUND SHANK INSERT HOLDERS FOR SQUARE-SHANK
HSK-T TOOING SYSTES for TURNING I SET SCREW HODERS FOR ROUND SHANK For through-spindle coolant CC type For nozzle-coolant CN type P. 71 World standard ISO for Turning ill INSERT HODERS FOR SUARE-SHANK
SHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
D24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30
3 Code System 02 Holder Code System Thread Inserts 24 American ACME 02 Insert Code System 25 Stub ACME 03 Technical Information for 26 28 28 UNJ (Unified Constant Thread) American Buttress (ABUT) British
Mill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
Mandrini & accessori. Clamping system & accessories MADE IN ITALY
290 Mandrini & accessori Clamping system & accessories 291 rticolo Issue Cod. Pag. Mandrini portapinza con cono ISO 30 ghiera di bloccaggio con cuscinetto TH02/1 292 Precision chucks ISO 30 with ball-bearing
4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
Specializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING
ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING 2017.09 MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING ARM is a new multifunctional high-performance cutter that
With over 100 different standard configurations... And still growing! Remember to use COPASLIP anti-seize compound on all insert screws
With over 100 different standard configurations...... And still growing! Standard Length End Mills TXD90-0500.500.625 3.00 1.09 1 TXD90-0625.625.625 3.00 1.09 2 TXD90-0750 3.50 1.47 2 TXD90-0750F 3.50
Coromant U. Indexable insert drill DRILLING. A productivity tool for cost efficient hole production. Drill adaptor for silent drilling E 53
Coromant U Indexable insert drill General Turning A productivity tool for cost efficient hole production Designed with optimal flute area for max chip flow Chip evacuation optimized for high metal removal
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
SMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly
FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies
WINNER! ALBRECHT. Precision Chucks
WINNER! ALBRECHT Precision Chucks At present, the Albrecht APC is the best performing chuck world wide. In the area of speed, tool life and safety. 3 4 You can expect: A clearly higher chip removal rate
AQUA Drill EX FLAT Series New Drilling Technology
AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long
Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
DRILLS. Technical Information for Drills. Solid Drills. Indexable Drills. Reamer. G02 KRLOY Drills G04 Available Insert
Technical Information for 02 KRLOY 04 Available Insert Indexable 06 Technical Information for KIN DRILL 12 KIN DRILL 21 Technical information of KIN DRILL (for through coolant system with a lathe) 22 King
Accessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
KED DRILL. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
Preview Edition: M370 ADVANCES 2014
Preview Edition: M370 ADVANCES 2014 TURNING SOLID END MILLING INDEXABLE MILLING TOOLING SYSTEMS METRIC High-Feed Applications M370 Series Designed for high feed rate productivity, M370 Series provides
GBA. Grooving with 3 Cutting Edges. Smooth Chip Evacuation with Molded Chipbreaker
G Grooving with 3 Cutting Edges Smooth Chip Evacuation with Molded Chipbreaker Large Lineup of Chipbreakers and Grades Smooth Chip Control with GM Chipbreaker NEW ybrid N620 G Grooving with 3 Cutting Edges
Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads
Page 1 / 5 MM GRIT 28K-45A MM GRIT 28K-75-6T10 MM GRIT 28K-60-6T10 MM GRIT 28K-45-6T10 Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads Page 2 / 5 Highlights Following market
Head BKA1923F BKA2528F BKA3236 BKA4045 BKA1923F BKA2528F BT40-MD32F-100 BKA3236 BT40-MD40F-115 BKA4045 BT40-MD50F-105 BKA5056 BKA6372 BT40-MD63F-110
FZ Micro Boring Bar BT - BKA MAS3-BT 1DIV. =ø0.02mm BT30 - BKA - 1 BKA - 1 1 BKA - 1 1 BKA - 1 1 BT - BKA - 1 L 1 1 BKA - 1 1 BKA - 160 160 BKA - 15 15 BKA56-175 175 BKA - 1 1 BKA - 0 0 Max.Boring Depth
AGS10E-AGS50, AGS5 B-SOL /ISM1-2
bar 0 0 0 C bar bar OK bar 709 (0/0) CL ENFR AGSE-AGS0, AGS B-SOL /ISM- C 70909.aa.RS-Titelbild Solarstationen 7.0.0 709 7.0.0 709 Deutsch Wichtige Hinweise Ersatzteile dürfen nur von einem zugelassenen
CERATIZIT designation system
C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,
Cutting
wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist
SMART DAMPER. Tool Holder with Integrated Damping System for Deep Hole Finish Boring and Extended Reach Milling A PRODUCT OF:
NEW! Tool Holder with Integrated Damping System for Deep Hole Finish Boring and Extended each Milling A PODUCT OF: OVEVIEW Quick and excellent damping effect tool holder. esults From Vibration With ong
NVS The new standard in universal machining
passion for precision NVS The new standard in universal machining [ 1 ] NB-NVS cylindrical mills The new standard in universal machining [ 2 ] With its NB-NVS mills, FRAISA is launching a new standard
KED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads»
» Cutting Tools» Angle Heads» We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Table of Contents Cutting
January /9. New Cutter with Strong Insert
1/9 New Cutter with Strong Insert 2/9 New cutter with strong insert FEATURES Higher insert thickness, stronger screw systems for heavy or demanding applications Exceptional performance at very high feed
Energy Oil & Gas Automotive. Aviation. Medical. Machining Titanium
Ti MACHINING Energy Oil & Gas Automotive Aviation Medical Machining Titanium TiAl6V4, Grade 5 alloy is the commonly used titanium grade. Some applications include: compressor blades, discs, and rings for
Content. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.
KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX KONDA TOOS
VFX for High Efficiency Milling of Titanium Alloys
TOOL NEW 2017.5 Update B182A For Milling VFX eries Insert Expansion VFX for High Efficiency Milling of s Outstanding metal removal rates up to 24 inch 3 /min (with ø2.5" cutter) Unparalleled Chip Ejection
WIDIA Victory Shoulder Mills VSM Series ADVANCES 2015 Metric
WIDIA Victory Shoulder Mills VSM490-15 Series ADVANCES 2015 Metric Double-Sided Shoulder Mill VSM490-15 WIDIA Victory shoulder milling series (VSM series) is especially engineered to achieve excellent
ADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加
超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ0.2 1.95mm
GrooVical Precise Grooving & Turning Applications METRIC. Innovative Grooving & Turning Solutions
GrooVical Precise Grooving & Turning Applications METIC Innovative Grooving & Turning Solutions GrooVical Precise Grooving & Turning Applications New ange of Indexable Grooving Inserts The Groovical family
Series Features: Diameters:.312,.375,.500,.625,.750, 1.000, 1.250, 1.500
New design indexable threadmilling inserts and tool holders allow for a profitable and effective way to produce external and internal applications quickly while generating superior surface finish. Diameters:.312,.375,.500,.625,.750,
Year of manufacture 2007 Control HEIDENHAIN itnc 530 Machine number X mm / Y mm / Z mm C - +/- 220 / B - +/- 110
EiMa GAMMA T LINEAR 5 axes portal machining center In excellent conditions Manufacturer Model EiMa GAMMA T LINEAR Year of manufacture 2007 Control HEIDENHAIN itnc 530 Machine number 11615 Travels X 3.700
Solid End Milling High-Performance Solid Carbide End Mills
Solid End Milling High-Performance Tool Selector and Grades...P2 P11 High-Performance Capability End Mills...P12 P86 High-Performance Solid Carbide Roughing End Mills...P88 P104 High-Performance Solid
Performance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
External Grooving. Summary of External Grooving. Internal Grooving. Summary of Internal Grooving. Face Grooving. Summary of Face Grooving
1~108 External Summary of External 2 KA / KAS 9 K / KS ill be switched to KA / KAS 11 KFF 12 KFF / KF 14 S...KF Sleeve older 15 K ill be switched to KA 16 KD (Integral ype for Automatic athe) 21 KD (Integral
Standard product line MEGA-Speed-Drill. MEGA-Speed-Drill-Inox MEGA-Speed-Drill-Iron. The tool specialists for the trade.
The tool specialists for the trade. Standard product line MEGA-Speed-Drill Available immediately as 5xD version : MEGA-Speed-Drill-Inox MEGA-Speed-Drill-Iron The tool specialists for the trade. MILLER
THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
PVC FOOT VALVE SKU: CV4674
SKU: CV4674 PVC-U Foot Check Valve Socket and BSP PVC-U Fuß Rückschlagventil Sockel und BSP PVC-U Pie válvula de retención del zócalo y BSP PVC-U pied Clapet Socket et BSP PVC Foot Check Valve - Socket
HSK TOOLING N1 - N16 N2 - N10 HSK TOOLING N11 - N12 QUICK CHANGE SYSTEM N13 - N16 CARTRIDGE R38 LEVER LOCK PARTS COMPATIBILITY
HSK OOLIG 1-16 HSK OOLIG 2-10 HSK- OOLIG (ICM Standard) 2 QUICK CHGE SYSEM 11-12 KQC Flower Petal dapter 11 CRRIDGE 13-16 LEVER LOCK PS / P 14 OP CLMP C 15 SCREW CLMP S 16 LEVER LOCK PRS COMPIILIY R38
RECOMMENDED TOOLS AND CHECKERS
RECOMMENDED TOOLS AND CHECKERS Page RECOMMENDED TOOLS AND CHECKERS........... 2 4 : An impact wrench can be used with tools with this mark. As tools without this mark are meant to be operated manually,
A revolution in stainless steel turning
A revolution in stainless steel turning Excellent resistance to notch wear and with good burr control. Long tool life achieved due to high plastic deformation resistance. B201E ISO insert Series for Stainless
Vol. 2 HY-PRO SHRINK
Vol. 2 HY-PRO SHRINK Face-Mill Cutter for Small Machines Tool Insertion Heating: Heat the holder with hot air for about 3 minutes. Attachment: Insert tool into the hole, which has been expanded by the
No. of Holes. Drill Dia. (in.)
UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast
SCREW SPINDLE PUMPS COOLING, LUBRICATING, CHIP HANDLING, PRESSURE BOOSTING, FLUSHING, MAINTAINING TEMPERATURES...
2018 SCREW SPINDLE PUMPS COOLING, LUBRICATING, CHIP HANDLING, PRERE BOOSTING, FLUSHING, MAINTAINING TEMPERATURES... www.brinkmannpumps.com Content Technical Information Electrical Features 4 8 Control
BORING SYSTEMS INFO. 3 nd edition
BORING SYSTEMS INFO 3 nd edition April 25 TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY TECHNOOGY FOR HIGH PRECISION Ingersoll
HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks