EPIC B521 G111 X Water distribution Heating and cooling. Catalogue of Products. Ekoplastik System
|
|
|
- Gervase Armstrong
- 5 years ago
- Views:
Transcription
1 EPIC 521 G111 X Water distribution Heating and cooling Catalogue of Products Ekoplastik System
2 Contents System Ekoplastik, enefits... 3 esignation of pipes S (SR) Instead of PN... 4 Major areas of application of individual pipe... 5 Standard Products for Potable (Cold) and Hot Water and for Heating (I.)... 6 Standard Products only for Potable (Cold) Water (II.) Product for Temporary Use (non Standard) (III.) ccessories (IV.) Ekoplastik System Catalogue of Products Tel Fax
3 System Ekoplastik System Ekoplastik is plastic piping system used for hot and cold water distribution in buildings, floor and central heating and airconditioning. Extended warranty period 10 years for standard products (I., II.), 2 years for nonstandard products (III.) enefits high quality PP piping systems from Wavin includes new 4th generation material PP-RCT includes unique 3 layer pipes with basalt fiber re-inforcement high pressure and temperature resistance Ekoplastik System Catalogue of Products 3
4 esignation of pipes S (SR) Instead of PN esignation of pipes S (SR) instead of PN In accordance with the ČSN EN ISO15874 and IN 8077 standards, it is necessary to designate the pipes as S or SR instead of PN. SR = 2S+1 SR /t egend: = outside diameter t = the wall thickness The PN designation indicates the permissive operating pressure in bar for maximum temperature 20 C and service life of 50 years For the lowest design coefficient according to PN, the standards ČSN EN ISO and IN 8077 no longer specify the pipe classification. We designate the PPR tubes as PN for historical reasons (it used to be the former designation for the pressurised product range) although the values no longer correspond to the definition above. The PP-RCT is a new type of material and the PN designation has not been implemented. The operating parameters of the pipes are specified in the designation on the tubes and in the ssembly instructions. The catalogue states the PN values for the pipes made of PP-RCT for easier orientation (the PN formula as specified in the standard was used in the calculation). 4 Ekoplastik System Catalogue of Products Tel Fax
5 Major reas of pplication of Individual Pipe PPR PN10 Ø мм PPR PN16 Ø мм PPR PN20 Ø мм EVO Ø мм Fiber asalt CIM Ø мм STI PUS Ø мм Fiber asalt Plus Ø мм max. 70 C max. 90 C Ekoplastik System Catalogue of Products 5
6 Standard Products for Potable (Cold) and Hot Water and for Heating (I.) t PIPE S 5 / PN 10 / SR t l KO mm mm mm mm m kg/m 20 15,6 2, ,121 STR020P10X 25 20,4 2, ,164 STR025P10X 32 26,2 2, ,258 STR032P10X 40 32,6 3, ,413 STR040P10X 50 40,8 4, ,636 STR050P10X 63 51,4 5, ,004 STR063P10X 75 61,4 6, ,401 STR075P10X 90 73,6 8, ,014 STR090P10X ,0 10, ,009 STR110P10X ,2 11, ,910 STR125P10X t PIPE S 3,2 / PN 16 / SR 7,4 1 1 t l KO mm mm mm mm m kg/m 16 11,6 2, ,094 STR016P16X 20 14,4 2, ,145 STR020P16X 25 18,0 3, ,227 STR025P16X 32 23,2 4, ,367 STR032P16X 40 29,0 5, ,566 STR040P16X 50 36,2 6, ,886 STR050P16X 63 45,8 8, ,387 STR063P16X 75 54,4 10, ,990 STR075P16X 90 65,4 12, ,839 STR090P16X ,8 15, ,274 STR110P16X ,8 17, ,530 STR125P16X t PIPE S 2,5 / PN 20 / SR t l KO mm mm mm mm m kg/m 16 10,6 2, ,107 STR016P20X 20 13,2 3, ,169 STR020P20X 25 16,6 4, ,259 STR025P20X 32 21,2 5, ,423 STR032P20X 40 26,6 6, ,657 STR040P20X 50 33,4 8, ,013 STR050P20X 63 42,0 10, ,611 STR063P20X 75 50,0 12, ,288 STR075P20X 90 60,0 15, ,332 STR090P20X ,4 18, ,977 STR110P20X ,4 20, ,470 STR125P20X 6 Ekoplastik System Catalogue of Products Tel Fax
7 1 t PIPE S 2,5 / PN 20 / SR 6 3 m 1 t l KO mm mm mm mm m kg/m 20 13,2 3, ,169 STR020P ,6 4, ,259 STR025P ,2 5, ,423 STR032P203 ll pipes listed above could be manufactured in alternative lengths to special order by prior agreement. NEW PIPE EVO 16 mm S 3,2 / SR 7,4 / PN 28 (calculation) PIPE EVO mm S 4 / SR 9 / PN 22 (calculation) 1 t 1 t l KO mm mm mm mm m kg/m 16 11,6 2, ,095 STRE016S ,4 2, ,127 STRE020S ,4 2, ,191 STRE025S ,8 3, ,313 STRE032S ,0 4, ,487 STRE040S ,8 5, ,755 STRE050S ,8 7, ,200 STRE063S ,2 8, ,690 STRE075S ,8 10, ,440 STRE090S ,4 12, ,620 STRE110S ,0 14, ,660 STRE125S4 PIPE - STI PUS mm S 3,2 / SR 7,4 / PN 28 (calculation) PIPE - STI PUS mm S 4 / SR 9 / PN 22 (calculation) 1 t e 1 t l KO mm mm mm mm mm m kg/m 16 17,9 11,4 2, ,137 STRS016RCT 20 21,9 14,4 2, ,207 STRS020RCT 25 26,9 18,0 3, ,298 STRS025RCT 32 33,9 23,2 4, ,465 STRS032RCT 40 41,9 29,0 5, ,692 STRS040RCT 50 52,0 36,2 6, ,046 STRS050RCT 63 65,0 45,8 8, ,587 STRS063RCT 75 77,0 58,2 8, ,860 STRS075RCT 90 92,0 69,8 10, ,673 STRS090RCT ,0 85,4 12, ,022 STRS110RCT mm with non-perforated aluminum foil mm with perforated aluminum foil job-order manufacture, delivery date 30 days Ekoplastik System Catalogue of Products 7
8 Standard Products for Potable (Cold) and Hot Water and for Heating (I.) PIPE Fiber ST PUS mm S 3,2 / SR 7,4 / PN 28 (calculation) PIPE Fiber ST PUS mm S 4 / SR 9 / PN 22 (calculation) 1 t 1 t l KO mm mm mm mm m kg/m 20 14,4 2, ,153 STRF020TRCT 25 18,0 3, ,239 STRF025TRCT 32 23,2 4, ,385 STRF032TRCT 40 29,0 5, ,599 STRF040TRCT 50 36,2 6, ,941 STRF050TRCT 63 45,8 8, ,471 STRF063TRCT 75 58,2 8, ,764 STRF075TRCT 90 69,8 10, ,546 STRF090TRCT ,4 12, ,781 STRF110TRCT ,0 14, ,891 STRF125TRCT job-order manufacture, delivery date 30 days PIPE Fiber ST CIM mm S 4 / SR 9 / PN 22 (calculation) PIPE Fiber ST CIM mm S 5 / SR 11 / PN 18 (calculation) t 1 t l KO mm mm mm mm m kg/m 20 14,4 2, ,128 TTRFC020TRCT 25 18,0 2, ,199 TTRFC025TRCT 32 26,2 2, ,269 TTRFC032TRCT 40 32,6 3, ,428 TTRFC040TRCT 50 40,8 4, ,664 TTRFC050TRCT 63 51,4 5, ,050 TTRFC063TRCT 75 61,4 6, ,501 TTRFC075TRCT 90 73,6 8, ,122 TTRFC090TRCT ,0 10, ,160 TTRFC110TRCT ,2 11, ,082 TTRFC125TRCT 1 job-order manufacture, delivery date 30 days 8 Ekoplastik System Catalogue of Products Tel Fax
9 PIPE IN COI 1 t S SR t l KO mm mm m kg/m 16 3,2(16) 7,4 2, ,094 STRK016P STRK016P ,0(10) 11 2, ,121 STRK020P STRK020P ,2(16) 7,4 2, ,145 STRK020P STRK020P ,5(20) 6 2, ,107 STRK016P STRK016P ,5(20) 6 3, ,169 STRK020P STRK020P20 EOW 90 KO mm mm m I. II ,0 23, ,010 SKO01690XX 20 14,5 26, ,018 SKO02090XX 25 16,0 31, ,030 SKO02590XX 32 18,0 36, ,056 SKO03290XX 40 20,5 43, ,100 SKO04090XX 50 23,5 51, ,158 SKO05090XX 63 27,5 61, ,334 SKO06390XX 75 30,0 70, ,558 SKO07590XX 90 33,0 82, ,010 SKO09090XX ,0 95,0 1 1,344 SKO11090XX ,0 105,0 1 1,640 SKO12590XX Information about delivery on request EOW 90 INTERN / EXTERN 1 2 C 3, C KO mm mm mm mm mm I. II ,0 21,3 25,0 12,0 50 0,006 SKO116XXXX 20 14,5 26,8 30,3 13, ,014 SKO120XXXX 25 16,0 31,0 35,0 14, ,024 SKO125XXXX 32 18,0 36,5 42,2 16, ,044 SKO132XXXX Ekoplastik System Catalogue of Products 9
10 Standard Products for Potable (Cold) and Hot Water and for Heating (I.) EOW KO mm mm m I. II ,0 18,7 50 0,008 SKO01645XX 20 14,5 20, ,014 SKO02045XX 25 16,0 24, ,024 SKO02545XX 32 18,0 27, ,042 SKO03245XX 40 20,5 31, ,082 SKO04045XX 50 23,5 36, ,122 SKO05045XX 63 27,5 43, ,280 SKO06345XX 75 30,0 48, ,406 SKO07545XX 90 33,0 54, ,654 SKO09045XX ,0 62,1 1 0,965 SKO11045XX 45 EOW 45 INTERN / EXTERN 3 C KO mm mm mm mm mm mm I. II ,0 18,7 18,7 12,0 50 0,008 SKO11645XX ,5 20,8 21,5 13, ,012 SKO12045XX ,0 24,0 24,0 14, ,026 SKO12545XX TEE KO mm mm mm mm I. II ,0 23,2 46,4 50 0,012 STK016XXXX 20 14,5 27,0 54, ,022 STK020XXXX 25 16,0 32,0 60, ,038 STK025XXXX 32 18,0 35,7 70, ,070 STK032XXXX 40 20,5 38,5 86, ,124 STK040XXXX 50 23,5 51,0 102, ,196 STK050XXXX 63 27,5 61,5 123, ,430 STK063XXXX 75 30,0 70,1 140, ,644 STK075XXXX 90 33,0 83,1 166,2 1 1,134 STK090XXXX ,0 99,1 198,2 1 1,962 STK110XXXX ,0 105,0 210,0 1 2,030 STK125XXXX Information about delivery on request 10 Ekoplastik System Catalogue of Products Tel Fax
11 1 REUCING TEE KO mm mm mm mm mm mm I. II ,5 13,0 53,0 23,0 50 0,018 STKR02016X ,0 14,5 55,0 29, ,032 STKR02520X ,0 14,5 67,0 34, ,052 STKR03220X ,0 16,0 73,0 34, ,062 STKR03225X ,5 14,5 64,5 38, ,082 STKR04020X ,5 16,0 66,0 40, ,090 STKR04025X ,5 18,0 86,0 41, ,132 STKR04032X ,5 16,0 77,0 43, ,138 STKR05025X ,5 18,0 84,0 46, ,152 STKR05032X ,5 20,5 91,4 47, ,176 STKR05040X ,5 16,0 85,0 49, ,239 STKR06325X ,5 18,0 92,0 52, ,290 STKR06332X ,5 20,5 100,0 54, ,306 STKR06340X ,5 23,5 110,0 57, ,340 STKR06350X REUCING TEE KO mm mm mm mm mm mm mm mm I. II ,0 14,5 14,5 55,2 29, ,028 STKR ,0 14,5 14,5 57,3 32, ,040 STKR ,0 14,5 16,0 58,9 32, ,044 STKR ,0 18,0 16,0 66,0 34, ,052 STKR CROSS PIECE 3 1 KO mm mm mm I. II ,5 26,3 25 0,024 SKRI020XXX 25 16,0 30,1 25 0,042 SKRI025XXX 32 18,0 35, ,070 SKRI032XXX 40 20,5 42, ,128 SKRI040XXX C 3 EN C α KO 1 α 2 mm mm mm mm mm mm I. II ,5 37,0 56,0 13, ,022 SO02090XXX ,0 45,0 67,0 14, ,036 SO02590XXX Ekoplastik System Catalogue of Products 11
12 Standard Products for Potable (Cold) and Hot Water and for Heating (I.) THREE-WY EOW KO mm mm mm I. II ,5 26, ,020 SKOT020XXX 25 16,0 29, ,032 SKOT025XXX 32 18,0 35, ,062 SKOT032XXX 40 20,5 41, ,108 SKOT040XXX SOCKET KO mm mm mm I. II ,0 33,0 50 0,006 SN016XXXX 20 14,5 34, ,010 SN020XXXX 25 16,0 37, ,018 SN025XXXX 32 18,0 40, ,034 SN032XXXX 40 20,5 48, ,056 SN040XXXX 50 23,5 53, ,082 SN050XXXX 63 27,5 65, ,118 SN063XXXX 75 30,0 73, ,314 SN075XXXX 90 33,0 79,2 1 0,470 SN090XXXX ,0 88,2 1 0,782 SN110XXXX ,0 86,0 1 0,745 SN125XXXX Information about delivery on request REUCER KO mm mm mm mm mm I. II ,0 14,5 34, ,014 SRE02520XX ,0 14,5 39, ,026 SRE03220XX ,0 16,0 39, ,028 SRE03225XX 12 Ekoplastik System Catalogue of Products Tel Fax
13 REUCER INTERN / EXTERN C C KO mm mm mm mm mm I. II ,0 32,5 13,0 50 0,006 SRE12016XX ,5 34,0 14, ,010 SRE12520XX ,5 40,0 16, ,016 SRE13220XX ,0 39,5 16, ,018 SRE13225XX ,5 47,0 18, ,024 SRE14020XX ,0 45,4 18, ,026 SRE14025XX ,0 48,2 18, ,034 SRE14032XX ,0 41,3 21, ,042 SRE15025XX ,0 55,5 22, ,052 SRE15032XX ,5 52,0 22, ,048 SRE15040XX ,0 49,3 25, ,070 SRE16325XX ,0 62,5 25, ,080 SRE16332XX ,5 58,5 25, ,078 SRE16340XX ,5 58,5 25, ,078 SRE16350XX ,5 64,5 28, ,116 SRE17540XX ,5 64,5 28, ,120 SRE17550XX ,5 71,5 28, ,210 SRE17563XX ,5 64,5 33,4 1 0,221 SRE19063XX ,0 78,0 33,4 1 0,290 SRE19075XX ,0 60,0 39,4 1 0,268 SRE111075X ,0 87,0 39,4 1 0,502 SRE111090X ,0 100,3 42,4 1 0,678 SRE Information about delivery on request NKING PUG KO mm mm mm I. II ,5 20,9 50 0,004 SZ016XXXX 20 14,5 24, ,008 SZ020XXXX 25 16,0 28, ,014 SZ025XXXX 32 18,0 33, ,026 SZ032XXXX 40 20,5 39, ,048 SZ040XXXX 50 23,5 47, ,078 SZ050XXXX 63 27,5 53,5 5 0,170 SZ063XXXX 75 30,0 60,0 5 0,262 SZ075XXXX 90 33,0 69,0 1 0,425 SZ090XXXX ,0 79,0 1 0,715 SZ110XXXX Ekoplastik System Catalogue of Products 13
14 Standard Products for Potable (Cold) and Hot Water and for Heating (I.) NKING PUG INTERN C 3 C KO mm mm mm I. II. 20,0 14,3 23, ,004 SZ120XXXE 3 CROSSOVER S 2,5 / pn 20 / sdr 6 3 S 1 2 KO mm (PN20) mm mm mm mm I. II. 16 2,5 (20) 35,0 400,0 80,0 180,0 10 0,044 SKR016P20X ,5 (20) 47,0 400,0 80,0 180, ,070 SKR020P20X 25 2,5 (20) 52,0 400,0 80,0 120, ,110 SKR025P20X 32 2,5 (20) 65,0 390,0 64,0 106, ,174 SKR032P20X 40 2,5 (20) 65,0 390,0 64,0 106, ,268 SKR040P20X CROSSOVER WITH SOCKET S KO mm (PN20) mm mm mm I. II. 20 2,5 (20) 14,5 33,4 160, ,041 SKRH020P ,5 (20) 16,0 44,2 200, ,089 SKRH025P20 COMPENSTION PIPE S 2,5 / pn 20 / sdr 6 S KO mm (PN20) mm mm 16 2,5 (20) 185,0 320,0 10 0,090 SKS016P20X 20 2,5 (20) 200,0 450,0 10 0,174 SKS020P20X 25 2,5 (20) 210,0 440,0 10 0,264 SKS025P20X 32 2,5 (20) 230,0 410,0 5 0,430 SKS032P20X 40 2,5 (20) 290,0 450,0 3 0,786 SKS040P20X 14 Ekoplastik System Catalogue of Products Tel Fax
15 REUCING SEEVE WITH MET FEME THRE Rp Rp KO mm mm mm mm I. II. 16 1/2 13,0 38, ,050 SZI01620XX 20 1/2 14,5 39, ,056 SZI02020XX 20 3/4 14,5 42, ,072 SZI02025XX 25 1/2 16,0 40, ,062 SZI02520XX 25 3/4 16,0 47, ,075 SZI02525XX 32 3/4 18,0 45, ,081 SZI03225XX ,0 57, ,148 SZI03232OK 40 5/4 20,5 65, ,260 SZI04040XX 50 6/4 23,5 69,0 4 0,328 SZI05050XX ,5 76,0 2 0,616 SZI06363XX REUCING SEEVE WITH MET FEME THRE WITH CROSS Rp Rp KO mm mm mm mm I. II. 20 1/2 14,5 42, ,058 SZI02020KX REUCING SEEVE WITH MET ME THRE 1 R R 1 KO mm mm mm mm mm I. II. 16 1/2 13,0 52,0 37, ,064 SZE01620XX 20 1/2 14,5 53,5 39, ,062 SZE02020XX 20 3/4 14,5 58,0 40, ,096 SZE02025XX 25 1/2 16,0 55,5 41, ,066 SZE02520XX 25 3/4 16,0 59,0 41, ,098 SZE02525XX 32 3/4 18,0 60,0 44, ,105 SZE03225XX ,0 62,5 46, ,170 SZE03232XX ,0 69,5 42, ,204 SZE03232OK 40 5/4 20,5 80,0 48, ,312 SZE04040XX 50 6/4 23,5 81,6 54,0 4 0,460 SZE05050XX ,5 101,0 63,5 2 0,758 SZE06363XX 75 2½ 30,0 110,0 69,7 1 1,150 SZE07575XX ,0 130,0 85,0 1 1,774 SZE09090XX Ekoplastik System Catalogue of Products 15
16 Standard Products for Potable (Cold) and Hot Water and for Heating (I.)) MET REUCER WITH CP NUT G G KO mm mm mm I. II. 16 1/2 13,0 32,0 10 0,044 SZM01620XX 16 3/4 13,0 32,0 10 0,082 SZM01625XX 20 1/2 14,5 40, ,048 SZM02020XX 20 3/4 14,5 39, ,082 SZM02025XX ,5 39, ,152 SZM02032XX 25 3/4 16,0 41, ,086 SZM02525XX ,0 41,0 4 0,154 SZM02532XX 32 5/4 18,0 48,0 2 0,254 SZM03240XX PM 20 3/4 14,5 39,0 10 0,084 SZM02025X pmd cap nut with the hole for the seal EOW 90 WITH MET FEME THRE Rp 2 1 Rp 1 1 KO mm mm mm mm I. II. 16 1/2 13,0 25,2 31, ,062 SKOI01620X 20 1/2 14,5 27,0 34, ,062 SKOI02020X 20 3/4 14,5 27,0 40, ,082 SKOI02025X 25 1/2 16,0 31,0 36, ,070 SKOI02520E 25 3/4 16,0 30,0 41, ,090 SKOI02525X ,0 36,0 51, ,168 SKOI03232X EOW 90 WITH MET ME THRE 1 2 R Rp 1 1 KO mm mm mm mm I. II. 16 1/2 13,0 25,2 31, ,074 SKOE01620X 20 1/2 14,5 27,0 34, ,074 SKOE02020X 20 3/4 14,5 27,0 39, ,112 SKOE02025X 25 1/2 16,0 31,0 36, ,082 SKOE02520E 25 3/4 16,0 30,0 39, ,116 SKOE02525X ,0 36,0 41, ,118 SKOE03232X SOCKET WITH RIN VVE INTERN / EXTERN 3 1 C 3 C KO mm mm mm mm mm mm I. II ,5 53,0 48,0 13, ,054 SNVV120XX ,0 54,0 49,7 14, ,064 SNVV125XX ,0 59,0 53,2 16, ,084 SNVV132XX 16 Ekoplastik System Catalogue of Products Tel Fax
17 EOW 90 FOR W MOUNTING Rp 1 2 KO Rp mm mm mm mm I. II. 16 1/2 13,0 32,0 23, ,064 SNK016XXXX 20 1/2 14,5 34,0 26, ,068 SNK020XXXX 25 1/2 16,0 36,0 27, ,072 SNK02520XX 25 3/4 16,0 39,0 29, ,098 SNK025XXXX 1 EOW 90 FOR W MOUNTING INTERN / EXTERN Rp C 2 3 Rp 1 2 C KO mm mm mm mm I. II. 20 1/2 35,0 35,0 11, ,068 SNK120XXXX 3 EOW 90 FOR W MOUNTING WITH MET ME THRE R 1 2 KO mm mm mm mm I. II. 20 1/2 34,0 32,2 14, ,072 SNKE02020X Ending wall elbow left Rp Ro KO Ro Rp mm mm mm mm mm I. II ,5 1/2 50,0 66,0 28, ,066 SNK020KXX Ending wall elbow right Ro Rp Rp Ro KO mm mm mm mm mm I. II ,5 1/2 50,0 66,0 28, ,066 SNK020KPXX Ekoplastik System Catalogue of Products 17
18 Standard Products for Potable (Cold) and Hot Water and for Heating (I.) W EOWS WITH HOER KO mm mm mm I. II , ,162 SNK02020X HOER FOR W EOWS KO mm mm I. II ,026 SNKXXXXXX TEE WITH TP CONNECTOR Ro Rp Rp Ro KO mm mm mm mm mm I. II ,5 1/2 50,0 66,0 28, ,080 SNKP020XXX 25 16,0 1/2 56,0 76,0 33, ,090 SNKP02520X W MOUNTING GROUP WITH TP CONNECTORS 1 Rp 1 KO mm mm mm mm mm I. II. 20 1/2 14,5 46,0 105/130/ , ,220 SNKK020XXX 25 1/2 16,0 51,0 110/125/ , ,268 SNKK025XXX Rp 1 - extension 100, 135, 150 mm, it is neccessary to set right with eccentric parts. Rp TEE WITH MET FEME THRE Rp 1 KO mm mm mm mm I. II. 20 1/2 14,5 51,5 34, ,068 STKI02020X 25 1/2 16,0 80,0 40, ,076 STKI02520X 25 3/4 16,0 80,0 40, ,094 STKI02525X 32 1/2 18,0 71,0 40, ,106 STKI03220X 32 3/4 18,0 71,0 42, ,118 STKI03225X ,0 80,0 55, ,186 STKI03232X 18 Ekoplastik System Catalogue of Products Tel Fax
19 R TEE WITH MET ME THRE R 1 KO mm mm mm mm I. II. 20 1/2 14,5 51,5 48, ,080 STKE02020X 20 3/4 14,5 60,0 50, ,118 STKE02025X 25 1/2 16,0 60,0 51, ,088 STKE02520X 25 3/4 16,0 65,0 52, ,122 STKE02525X 32 3/4 18,0 71,0 58, ,146 STKE03225X ,0 80,0 60, ,208 STKE03232X PSTIC WE IN SE 1 1 KO mm mm mm mm mm I. II ,0 27,0 58, ,034 SNS06332XX ,0 27,0 64, ,032 SNS07532XX ,0 27,0 72, ,034 SNS09032XX ,0 25,7 80, ,044 SNS11032XX ,0 25,7 80, ,048 SNS11040XX WE IN SE WITH MET FEME THRE Rp 1 KO mm mm mm 63 3/4 27,0 58,5 10 0,084 SNSI06325X 75 3/4 27,0 64,5 10 0,084 SNSI07525X 90 3/4 27,0 72,0 10 0,084 SNSI09025X WE IN SE WITH MET ME THRE R 1 KO mm mm mm 63 3/4 44,8 76,3 10 0,112 SNSE06325X 75 3/4 44,8 82,3 10 0,110 SNSE07525X 90 3/4 44,8 89,8 10 0,110 SNSE09025X FITER KO mm mm mm mm I. II ,0 76,0 14, ,116 SFI020XXXX 25 45,0 82,0 16, ,134 SFI025XXXX 32 55,0 95,0 18, ,234 SFI032XXXX Ekoplastik System Catalogue of Products 19
20 Standard Products for Potable (Cold) and Hot Water and for Heating (I.) CK FOW VVE KO mm mm mm mm I. II ,0 76,0 14, ,136 SZK020XXX 25 45,0 82,0 16, ,154 SZK025XXX 32 55,0 95,0 18, ,266 SZK032XXX STRIGHT WY VVE KO mm mm mm mm I. II ,5 27,5 69, ,140 SVE020XXXX 25 16,0 30,0 80, ,192 SVE025XXXX 32 18,0 39,0 89, ,380 SVE032XXXX 40 20,5 41,0 112,0 5 0,542 SVE040XXXX 50 23,5 48,0 136,0 1 0,732 SVE050XXXX 63 27,5 60,0 162,0 1 1,330 SVE063XXXX TP PSTIC KO mm mm mm I. II ,0 59, ,092 SVEK016XXX 20 14,5 65, ,116 SVEK020XXX 25 16,0 71, ,168 SVEK025XXX 32 18,0 85, ,294 SVEK032XXX 40 20,5 100, ,544 SVEK040XXX 50 23,5 115, ,874 SVEK050XXX 63 27,5 134, ,278 SVEK063XXX SHUT OFF VVE STRIGHT WITH chrome COVER KO mm mm mm mm I. II ,5 27,5 69, ,208 SVEPK020X 25 16,0 30,0 80, ,270 SVEPK025X 20 Ekoplastik System Catalogue of Products Tel Fax
21 SHUT OFF VVE EUXE STRIGHT WITH CHROME HNE KO mm mm mm mm I. II ,5 27,5 69, ,338 SVEPR020X 25 16,0 30,0 80, ,392 SVEPR025X VVE extension 20, 25 mm KO 1 0,071 VEP020XXX extension for shut off valves straight 20 a 25 mm SHUT OFF TP WITH chrome COVER KO mm mm mm mm I. II ,5 67,0 65, ,254 SVEKPK ,0 65,0 71, ,334 SVEKPK025 COUPING WITH NUT KO mm mm mm mm I. II ,0 82,0 40, ,088 SRS020XXXX 25 38,0 82,0 40, ,142 SRS025XXXX 32 46,0 92,0 45, ,212 SRS032XXXX 40 58,0 112,0 55, ,288 SRS040XXXX Ekoplastik System Catalogue of Products 21
22 Standard Products for Potable (Cold) and Hot Water and for Heating (I.) Rp SCREW UNION FEME 1 Rp 1 KO mm mm mm I. II. 20 1/2 60,0 40, ,086 SSI02020XX 25 3/4 62,0 40, ,136 SSI02525XX ,0 45, ,220 SSI03232XX R SCREW UNION ME 1 R 1 KO mm mm mm I. II. 20 1/2 77,0 40, ,118 SSE02020XX 25 3/4 80,0 40, ,196 SSE02525XX ,0 45, ,324 SSE03232XX SCREW UNION WITH SOCKET - FEME Rp 1 KO mm mm mm I. II. 20 1/2 37,5 19, ,122 SSHI02020X 25 3/4 46,5 23, ,213 SSHI02525X SCREW UNION WITH SOCKET - ME Rp 1 KO mm mm mm I. II. 20 1/2 52,5 19, ,142 SSHE02020X 25 3/4 59,0 23, ,223 SSHE02525X 22 Ekoplastik System Catalogue of Products Tel Fax
23 FNGE PTOR 1 S S KO mm mm mm mm mm I. II ,0 80, ,072 SN040XXXX 50 60,0 90,0 12, ,102 SN050XXXX 63 62,0 105,0 13, ,156 SN063XXXX 75 73,0 123,0 14, ,244 SN075XXXX 90 92,0 140,0 17,0 1 0,400 SN090XXXX ,0 160,0 19,0 1 0,618 SN110XXXX ,0 188,0 20, ,697 TN125XXXX Information about delivery on request FNGE 1 2 d Y KO mm mm mm 40 / N32 100,0 140,0 46, ,660 PRI040NXXX 50 / N40 110,0 150,0 54, ,802 PRI050NXXX 63 / N50 125,0 165,0 66, ,414 PRI063NXXX 75 / N65 145,0 185,0 83, ,978 PRI075NXXX 90 / N80 160,0 200,0 94, ,490 PRI090NXXX 110 / N ,0 220,0 114, ,098 PRI110NXXX 125 / N ,0 250,0 166, ,450 PRI125NXXX Y number of bore holes EECTRO FUSION SOCKET KO mm mm mm 20 26,5 55,0 1 0,030 EN020XXXX 25 26,5 55,0 1 0,038 EN025XXXX 32 25,0 52,0 1 0,044 EN032XXXX 40 25,0 52,0 1 0,060 EN040XXXX 50 25,0 52,0 1 0,076 EN050XXXX 63 30,0 63,0 1 0,120 EN063XXXX 75 33,0 70,0 1 0,158 EN075XXXX 90 36,0 75,0 1 0,206 EN090XXXX ,0 87,0 1 0,364 EN110XXXX Ekoplastik System Catalogue of Products 23
24 Complete Offer of Fittings for Gypsum Wall Mounting (I.) Reducing Sleeve for Gypsum Wall Mounting C Rp C KO mm mm mm mm I. II. 20 1/2 14,5 26,0 40, ,102 SZS02020X Rp Elbow for Gypsum Wall Mounting Rp 1 Rp 1 2 C KO mm mm mm mm mm I. II. 20 1/ ,0 27,0 26, ,114 SNKS020SX 2 C Wall Mounting Group with Tap Connectors for Gypsum Wall Rp 1 C KO mm mm mm mm mm mm 20 1/2 14,5 49,0 100/135/150 26,0 234,0 10 0,320 SNKK020SXX 1 Rp 24 Ekoplastik System Catalogue of Products Tel Fax
25 Standard Products only for Potable (Cold) Water (II.) STRIGHT WY VVE WITH RIN VVE KO mm mm mm mm right 40 20,5 41,0 112,0 1 0,578 SVEV040PXX 50 23,5 48,0 136,0 1 0,788 SVEV050PXX 63 27,5 60,0 162,0 1 1,388 SVEV063PXX left 40 20,5 41,0 112,0 1 0,572 SVEV040XX 50 23,5 48,0 136,0 1 0,754 SVEV050XX 63 27,5 60,0 162,0 1 1,416 SVEV063XX job-order manufacture, delivery date 30 days Product for Temporary Use (non Standard) (III.) -PSTIC REUCER male thread R R KO mm mm mm I. II. 20 1/2 14,5 40, ,014 SG02020XX 20 3/4 14,5 38,0 50 0,012 SG02025XX 25 3/4 16,0 42,0 50 0,020 SG02525XX ,0 54,0 25 0,038 SG03232XX 40 5/4 20,5 62,0 10 0,074 SG04040XX 50 6/4 23,5 63,0 10 0,094 SG05050XX ,5 81,9 5 0,194 SG06363XX Ekoplastik System Catalogue of Products 25
26 ccessories (IV.) SSEMY PTE FOR EOW 90 FOR W MOUNTING C E F KO mm mm mm mm mm mm I. II. 220,0 64,0 135,0 110,0 45,0 40, ,058 NPXXXXXXX MET SEEVE (WITH WOO SCREW) KO mm I. II ,056 PRK02025XX ,074 PRK03240XX ,124 PRK06350XX MET SEEVE (SCREW / NUT) NUT SCREW KO mm mm mm I. II M8/ ,078 PRK04853X M8/ ,146 PRK07278X M8/ ,180 PRK08792X M8/ ,238 PRK M8/ ,023 VRUTM8100X PSTIC CIP KO mm I. II ,004 PRE016XXXX ,004 PRE020XXXX ,006 PRE025XXXX ,008 PRE032XXXX ,016 PRP040XXXX ,034 PRP050XXXX ,046 PRP063XXXX ,084 PRP075XXXX ,114 PRP090XXXX ,136 PRP110XXXX with tape 26 Ekoplastik System Catalogue of Products Tel Fax
27 PSTIC OUE CIP KO mm ,016 PRV0202XX ,022 PRV0252XX WEING MCHINE electronic (FOR NON-PIRE PTER) W KO RSP 2a ,328 SVRSP2XE. WEING MCHINE electronic (FOR PIRE PTER) W KO RSP 2aPm ,428 SVRSP2PE WEING SET with adapters mm W KO RSP 2a 800 matrice Ø ,223 SVKRSP26E RSP 2aPm 800 matrice Ø ,645 SVKRSP2P6E Includes pipe cutter PROFI, allen key, meter, stabilization jack, foot stand, adapters and welding machine according to the order. WEING SET with adapters mm W KO RSP 2a 800 matrice Ø ,545 SVKRSP23E RSP 2aPm 800 matrice Ø ,490 SVKRSP2P3E Includes pipe cutter STNR, allen key, stabilization jack, stabilisation foot stand, adapters and welding machine according to the order. Ekoplastik System Catalogue of Products 27
28 ccessories (IV.) REPIRING SET KO komplet 1 0,186 OSXXXXXXX Repairing set includes 5 pcs of repairing stakes 12 mm and non-paired adapter 12 mm. REPIRING STKES Ø KO mm 12 1 (5) 0,029 OTXXXXXXXX EECTROFUSION WEING MCHINE - EEKTR IGHT W KO /160 mm ,000 SVEEKTR job-order manufacture, delivery date 30 days PTER PIRE KO mm ,074 NP016XXXX ,078 NP020XXXX ,138 NP025XXXX ,164 NP032XXXX ,308 NP040XXXX ,333 NP050XXXX ,493 NP063XXXX ,653 NP075XXXX ,089 NP090XXXX ,681 NP110XXXX ,996 NP125XXXX 28 Ekoplastik System Catalogue of Products Tel Fax
29 PTER NON-PIRE KO mm ,130 N016CXXXX ,133 N020CXXXX ,178 N025CXXXX ,215 N032CXXXX ,379 N040CXXXX ,517 N050CXXXX ,822 N063CXXXX PTER FOR WE IN SE / PIRE 1 KO mm mm ,298 SNNS06332X ,296 SNNS07532X ,296 SNNS09032X ,432 SNNS11040X for weld in saddle with diameter 110/32 and 110/40 SSEMY JIG MP-125 KO mm MP ,200 SVMP125XX MP 125 Includes frame, stand with welding machine with power consumption of 1400 W, case with accesories. job-order manufacture, delivery date 30 days CONTCT THERMOMETER T METER KO T-METER 1 0,940 TEPOXXXXX Ekoplastik System Catalogue of Products 29
30 ccessories (IV.) TIGHTENING SPNNER WITH N KO 1 0,297 UKXXXXXXXX PIPE CUTTER shear (PROFI) KO mm PROFI ,383 NU042PXXXX PIPE CUTTER shear (PROFI m2) KO mm M ,241 NU063XXXXX PIPE CUTTER shear (standard) KO mm STNR ,360 NU042HSXXX PIPE CUTTER KO mm ,420 REZ050140X 30 Ekoplastik System Catalogue of Products Tel Fax
31 STI PIPE SHVER 1 KO mm ,134 REZS01620X ,156 REZS02025X ,206 REZS02532X ,266 REZS03240X ,302 REZS050XXX ,352 REZS063XXX ,386 REZS075XXX ,634 REZS090XXX ,870 REZS110XXX SHVERS TO RI MCHINE FOR STI PIPES KO mm ,096 REZS016VXX ,076 REZS020VXX ,144 REZS025VXX ,242 REZS032VXX ,290 REZS040VXX ,882 REZS050VXX ,406 REZS063VXX pintle 1 0,020 CEPXXXXXXX RI FOR WE IN SE KO mm ,200 VNS032XXXX ,300 VNS040XXXX GVNIZE TROUGH l KO mm mm I. II ,331 ZSP20XXXX ,428 ZSP25XXXX ,516 ZSP32XXXX ,607 ZSP40XXXX ,732 ZSP50XXXX ,879 ZSP63XXXX Ekoplastik System Catalogue of Products 31
32 ccessories (IV.) PUG SHORT G KO I. II. 1/ ,008 ZGXXXXXXX including rubber seal PUG ONG G KO I. II. 1/ ,022 ZGXXXXXX including rubber seal MSTIC SENT SISE gr KO ,018 TMSIS10XXX ,124 TMSIS100XX SEING TEFON FIRE KO m 50 0,053 TTN50XXXXX 150 0,126 TTN150XXXX 32 Ekoplastik System Catalogue of Products Tel Fax
33 For production and testing is used standard en iso Requirements from this standard are stated in pn 01 (Internal Company Standard). The application and assembling of products have to conform to assembly regulations of ekoplastik system. System of quality is certified in accordance with iso Extended warranty period 10 years for standard products (i.,ii.) Common warranty period 2 years for other products (iii.,iv.) SHORTCUTS USE code purchasing code s/pn serie / pressure line i. small packing ii. big packing g female cylindrical thread no sealing on threads rp female cylindrical thread sealing on threads r male conical thread sealing on threads Ekoplastik System Catalogue of Products 33
34 Notes 34 Ekoplastik System Catalogue of Products Tel Fax
35 Ekoplastik System Catalogue of Products 35
36 iscover our broad portfolio at Water management Heating and cooling Water and gas distribution Waste water drainage Cable ducting WVIN Ekoplastik s.r.o. Rudeč Kostelec n/abem Czech Republic Tel. +420/ Fax +420/ Wavin operates a programme of continuous product development, and therefore reserves the right to modify or amend the specification of their products without notice. ll information in this publication is given in good faith, and believed to be correct at the time of going to press. However, no responsibility can be accepted for any errors, omissions or incorrect assumptions. Users should satisfy themselves that products are suitable for the purpose and application intended
Catalogue of Products. System Ekoplastik. Water distribution Heating and cooling
Catalogue of Products System Ekoplastik Water distribution Heating and cooling Contents Product Range...3 System Ekoplastik - enefits, esignation of pipes S (SR) instead of PN...5 Standard Products for
Sistema Ekoplastik Ekoplastik Sistēmas
Vamzdynai vandentiekio ir šildymo sistemoms Gaminių katalogas Ūdensapgādes un apkures ūdens cauruļvad u sistēmas Izstrādājumu katalogs EPIC 521 G111 X721 2015 Sistema Ekoplastik Ekoplastik Sistēmas Turinys
Manifolds made of PP-RCT
Underfloor heating system Manifolds made of PP-RT Modular system Manifolds New! Underfloor heating made of PP-RT We present you a unique system of plastic manifold sets. Now it is possible to easily assemble
PP-R PIPES AND FITTINGS. Pilsatherm Pipes and Fittings Technical Catalogue. Wavin TR Plastik San. A.Ş.
PP-R PIPES AND FITTINGS Pilsatherm Pipes and Fittings Technical Catalogue Wavin TR Plastik San. A.Ş. 1 JUNE 2014 2 FORE WORD Pilsa Plastic Products Inc. started production in 1971 and has always been a
Ø mm. SYSTEM KAN-therm. High quality for reasonable price TECHNOLOGIA SUKCESU ISO 9001
Ø 16 110 mm SYSTEM KAN-therm PP High quality for reasonable price TECHNOLOGIA SUKCESU ISO 9001 Contents 3 KAN-therm PP System The material... 102 Sanitary systems installation... 102 Pipes... 103 Thermal
UV-RESISTANT MADE IN GERMANY THE SAFEST MOST RELIABLE CHOICE FOR EXPOSED POTABLE WATER APPLICATIONS POLO-INFO POLO-UV PP-R WATER PIPING SYSTEM
POLO-INFO PP-R WATER PIPING SYSTEM THE SAFEST MOST RELIABLE CHOICE FOR EXPOSED POTABLE WATER APPLICATIONS is the worldwide first audited UV-resistant PP-R system consisting of pipe and fitting, which can
PRICE LIST WEFATHERM. 1 November PP-R Piping System WEFATHERM PIPE LEADERS IN PIPELINE TECHNOLOGY. Asmuss Plastic Systems Limited
143 PRICE LIST 1 November 2016 The Wefatherm PP-R System is ideally suited for use in a wide range of applications including hot and cold water systems, industrial heating and cooling, air-conditioning
CATALOGUE DUCTS VENTILATION ELEMENTS. and. Production and sales office : Abrahámska 183; Malá Mača SLOVAKIA
CTOGUE of UCTS VENTITION EEMENTS Production sales office : brahámska 183; 925 21 Malá Mača SOVKI Phone : +421 31 / 701 08 41 Fax : +421 31 / 784 17 48 e-mail : tzbglobal@tzbglobal.sk www.tzbglobal.sk Unified
HARCO DUCTILE IRON IPS GASKETED FITTINGS DESIGN DATA
HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT pplicable Standards Ductile Iron: STM 536 Grade 65-45 -12, 80-55 - 06 Joints: STM D-3139; WW C153 Gaskets: SR Standard, EPDM & Nitrile vailable STM F-477
E & G Tools (M) Sdn Bhd Tel : / Fax :
E & G Tools (M) Sdn Bhd Tel : 03-78044210/03-78044202 Fax : 03-78044212 Email : egtools@gmail.com 245 PNEUMTIC TOOS PNEUMTIC TOOS S o m e t i m e s i m m i n e n t s u c c e s s i s i n t h e a i r. O
SYSTEM KAN-therm Push Platinum
SYSTEM KAN-therm Push Platinum ISO 9001 TECHNOLOGY OF SUCCESS Contents Page System KAN-therm Push Platinum - General information... 3 Multi-layer PE-Xc/Al/PE-HD Platinum pipes... 5 Parameters of multi-layer
Air Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
HAWLE - ZAK System. the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS.
HAWLE - System the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS. HAWLE - System the threadless, restraint jointing system for service connections integrated in Pipe Saddles, Service
WRENCHES WHERE DO YOU DIRECT YOUR OWN EFFORTS? I n the force s of the p re sent lies the power of the future
I n the force s of the p re sent lies the power of the future WHERE DO YOU DIRECT YOUR OWN EFFORTS? Precisely and firmly onto screw heads and nuts. Without accidental injuries! Thanks to their innovative
Pressure Pipes & Fittings
Pressure Pipes & Fittings Description: UPVC and CPVC pipes for hot and cold water supply under pressure. Range: Metric series fromø16 up toø315 mm, Imperial series fromø1/2" up toø1". Pressure Rating:
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
SYSTEM KAN-therm Push Platinum ISO 9001
SYSTEM KAN-therm Push Platinum ISO 9001 Contents Page System KAN-therm Push Platinum - General information...3 System KAN-therm Push Platinum - Technical information...4 Multi-layer PE-Xc/Al/PE-HD Platinum
ELECTROFUSION PRODUCT CATALOGUE
EECTROFUSION PROUCT CTOUE Electrofusion Fittings & Prouct ist Catalogue Solutions Water as Wastewater PI Traing EXCUSIVEY IMPORTE BY E1 1 P www.pitraing.co.za 1 E E www.incleon.co.za ElectroFusion System
Rotary inlets for pressurised oil, compressed air
Rotary inlets for pressurised oil, compressed air Product data sheets Rotary inlets for pressure oil, single channel 0086-010-size-160 9.03.00 Rotary inlets for pressure oil, two- channel 0088-226/326-size-010040
800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.
Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No
PVC Push-Fit Soil & ABS Solvent Waste Systems
DC-DPG-PT SEPTEMER 2013 PVC Push-Fit Soil & S Solvent Waste Systems Trade Price ist Prices effective from 1st September 2013 ll dimensions in mm unless otherwise stated. 1 Polypipe We design, develop and
PP-RCT Plumbing and HVAC Piping Systems
PP-RCT Plumbing and HVAC Piping Systems Pipe Fittings Valves 9-2016 Efficient Sustainable Green Technology Asahi/America, in partnership with Bänninger of Germany, introduces - Asahitec PP-RCT piping systems
RAUFUSION PP-R PLUMBING SYSTEM. Safer. Smarter. More Convenient
RAUFUSION PP-R PLUMBING SYSTEM Safer. Smarter. More Convenient SAFER Engineered for your safety and well being Safety is critical when choosing a suitable plumbing system. REHAU RAUFUSION consists of a
COMPONENTS FOR SOLAR THERMAL SYSTEMS
COMPONENTS FOR SOLAR THERMAL SYSTEMS 2012 2 The CALEFFI SOLAR product range has been specially developed for use in solar thermal systems, where high temperatures can normally be reached and where, depending
Law 10/91 and DPR 412/93 require that the hot water temperature at the point of use is 48 C + 5 and require the insulation of all piping.
4.4 HEAT LOSS Law 10/91 and DPR 412/93 require that the hot water temperature at the point of use is 48 C + 5 and require the insulation of all piping. The thickness of the insulation layer depends on
Butterfy valves 4 offset DN65 up to DN2500 / PN2,5 up to PN160 / Class 150 up to Class 900
EN utterfy valves 4 offset N up to N0 / PN2,5 up to PN / Class 1 up to Class 0 utterfly valves 4 offset N up to N0 / PN2,5 up to PN Main application The range of application depends directly on materials,
TRADE PRICE LIST 1st March 2018
TRADE PRICE LIST 1st March 2018 Contents Page Introduction to Hep 2 O Plumbing and Heating Systems 2 Hep 2 O Flexible Plumbing 3-14 Polybutylene Pipe 3 Demountable Fittings 4-6 Flexible Tap Connectors
Super-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
Pressure Measurement Fittings
Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings
Fittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use
Fittings and Accessories For oil and grease. For Centralized ubrication Systems and General Use Fittings and Accessories This brochure provides an overview of metallic pipe unions for luid engineering.
GIACOGREEN Pipes and Fittings in Polypropylene Random
GIACOGREEN Pipes and Fittings in Polypropylene Random GIACOMINI s.p.a. 28017 S.Maurizio d Opaglio (Novara) Tel. 0322-923111 Fax 0322-96256 Telex 200035 www.giacomini.com dal 1951 January 2000 GIACOMINI,
Table of contents. Chapter 1: Fusiotherm. Chapter 4: climasystem Produktgruppe 20. Chapter 5: aquatherm. Chapter 2: aquatherm SHT.
Table of contents Chapter 1: Fusiotherm 01 Fusiotherm -pipe 04 climatherm-pipe & aquatherm-lilac 07 Accessories 09 Fittings 15 Weld-in saddle 19 Threaded connections and accessories 22 Transition pieces
HDPE Pipe. Catalogue
HDPE Pipe Catalogue HDPE PIPE Catalogue Overview Proplastics is a leading supplier of world class plastic pipe systems for water and sewer reticulation to Southern Africa. Proplastics produces a wide range
Advanced PE Single Wall Piping System
Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
Centering Rings (Aluminium AW-6082-T6 / Stainless Steel ) with O-Ring (CR/FPM (FKM)) d s. d 2. d 1
Centering Ring (Auminium AW-6082-T6 / Stine Stee 1.4301) wit O-Ring (CR/FPM (FKM)) 2 1 1 2 Orering Informtion Auminium/FPM (FKM) Auminium/CR Stine tee/fpm (FKM) 1) 1 2 Orering Informtion Auminium/FPM (FKM)
COPRAX RANGE PIPES AND FITTINGS IN POLYPROPYLENE COP-RANDOM COPRAX. Comércio e Indústria do Plástico, Lda. AV. 16 DE MAIO Z.I.
COPRAX Comércio e Indústria do Plástico, Lda. AV. 16 DE MAIO Z.I. OVAR 3880 102 OVAR - PORTUGAL T +351 256 579 480 F +351 256 579 489 export@coprax.com www.coprax.com PIPES AND FITTINGS IN POLYPROPYLENE
Who limits the noise in soil stacks? OSMA. Obviously.
Who limits the noise in soil stacks? OSMA. Obviously. Acoustic Coupler. Introducing the new OSMA Acoustic Coupler Product features OSMA Acoustic Coupler 4S125 The new Acoustic Coupler from Osma has been
Take O ff Dimensions. Profipress with SC- Contur. Pipe line systems / Pipe connection technology 12.8 /
A Take O ff Dimensions Pipe line systems / Pipe connection technology Profipress with SC- Contur 2.8 / 202 86529 www.viega.com A Take Off Dimensions Pipe line systems / Pipe connection technology Profipress
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
Compression Fittings 36 Series Metric
6 Series 4 mm 28 mm O/ l l l l Wide range of types and sizes Rugged and durable Suitable for use under extreme conditions of pressure and temperature Ideal for most general industrial applications Technical
A Complete Piping System Solutions Company. Electrofusion Tools Catalogue. Brand
A Complete Piping System Solutions Company Catalogue Electrofusion Machine Dimensions and Specifications and KWS 500 Welding unit (8V-48V fittings to 710 mm) Mode: Manual and Barcode Data Logging: up to2040
ALP2018 ALP COIL INSERTS AND ACCESSORIES
LP2018 LP N CCESSORIES LP Supply P: 800-332-7090 P: 215-736-2030 www.alpsupply.com 81 LP2018 COIL INSERT SFE WORKING LO REUCTION FCTORS FOR TENSION LOING ONLY For Free Conditions- When inserts have a truncated
PP-R PIPING SYSTEM RELIABLE SYSTEM FOR LONG YEARS
PP-R PIPING SYSTEM RELIABLE SYSTEM FOR LONG YEARS Gallaplast PP-R PIPING SYSTEM TECHNICAL INFORMATION Features of the System Review of Products 3 Welding Technology Mounting and Installation GALLAPLAST
PRODUCT CATALOGUE DOUBLE PREINSULATED PIPES
PN-EN 15698-1 ITB Technical Approval AT-15-7772/2008+ Annex no.1 Validity term: September 30, 2013 Issued by the Building Research Institute in Warsaw Preinsulated Pipe System To Be Used In Buried Thermal
Plasson Solutions for Large Bore Pipes
Plasson Solutions for Large Bore Pipes Innovative Design Simpler Installation Plasson Quality and Reliability Plasson Large Bore PE Fitting Systems The use of PE has become well established in pipeline
Catalogue technical information
Modern water and heating solutions SYSTEM KAN therm Catalogue technical information Steel and Inox Underfloor heating TECHNOLOGY OF SUCCESS ISO 9001 Contents Page SYSTEM KAN-therm Push/Push Platinum...1
SYSTEM KAN-therm. Underfloor heating. Comfort and efficiency TECHNOLOGY OF SUCCESS ISO 9001
SYSTEM KAN-therm Underfloor heating Comfort and efficiency TECHNOLOGY OF SUCCESS ISO 9001 The underfloor heating of System KAN-therm - pipes and pipe accessories KAN-therm pipe PE-RT with EVOH layer for
A E R OFLEX - SK, ltd. PIPELINE & INSULATION SYSTEMS
A E R OFLEX - SK, ltd. PIPELINE & INSULATION SYSTEMS THE UNIQUE CONNECTION OF SOLAR COLLECTORS AND HEAT PUMPS FLEXIBLE PRE-ISULATED STAINLESS STEEL PIPELINE SYSTEM RESISTENT AGAINST HIGH TEMPERATURE, UV
COMPONENTS FOR SOLAR THERMAL SYSTEMS
COMPONENTS FOR SOLAR THERMAL SYSTEMS The Caleffi Solar product range has been specially developed for use in solar thermal systems, where high temperatures can normally be reached and where, depending
Bürkert Supplement program
ürkert Supplement program Subject to change Design changes can lead to changes in pricing Technical Specifications The technical data in the ordering tables have minimum specifications. or complete information
Hi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
Bradford Clamp Fittings
Complete ing Connection radford range: ½" - 12" Product Specifications 621 63-03 Ferrule Materials: G = 304 stainless steel R = 316L stainless steel other alloys are available Finish: 3 sanitary finish
PRICE LIST 2016 MULTILAYER PERT - AL - PERT
LIST 6 MULTILAYER PERT - AL - PERT INTRODUCTION AND CHARACTERISTICS Innovation in cold-hot water and heating systems EGB Group presents TFI, the novel conduction system for cold-hot and heating water.
General information Gate valves
General information Gate valves In 1957, Hawle invented the resilient-seated gate valve with multiple O-ring sealing of the valve spindle and had it patented. Today, this type of gate valve is the standard
Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, Flame Shield and bridge hangers for electrical and mechanical markets.
Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, Flame Shield and bridge hangers for electrical and mechanical markets. Champion Fiberglass began production of epoxy fiberglass
ELECTROFUSION FITTINGS & TOOLS
EECTROFUSION FITTINGS & TOOS ustralian Stanar 2016 Revision 1 03 PS (ustralian Poly Specialists) isn t an electrofusion fittings manufacturer an as such we commonly source an fabricate using prouct from
STANDARDISED MOUNTINGS
for PS / PLS / PC cylinders conforming ISO 15552-FNOR-DIN (PS-PLS) ISO 21287 (PC) standards Series 434 MOUNTINGS CONFORMING WITH ISO 21287 - ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications
ZPU Międzyrzecz Sp. z o.o. ZPU MIĘDZYRZECZ SP. Z O.O. SYSTEM PREINSULATED PIPES FOR LOW TEMPERATURE UTILITIES FLEXIBLE PIPESYSTEMS
ZPU Międzyrzecz Sp. z o.o. ZPU MIĘDZYRZECZ SP. Z O.O. SYSTEM PREINSULATED PIPES FOR LOW TEMPERATURE UTILITIES FLEXIBLE PIPESYSTEMS M-Pex M-Pex ZPU MIĘDZYRZECZ SP. Z O.O. SYSTEM PREINSULATED PIPES FOR
4 01 ta l o g u e 2 Ca P R i c e L I S T
Catalogue 2014 The Complete Product Range The compression fittings: Our Gebo Quick the universal compression fittings are available for steel pipes of 1/2" to 2" diameter, for black steel pipes of 20 mm
TRADE PRICE LIST - 1st March Push-Fit Plumbing & Underfloor Heating
TRADE PRICE LIST - 1st March 2019 Push-Fit Plumbing & Underfloor Heating Contents Page Introduction to Hep 2 O Plumbing and Heating Systems 2 Hep 2 O Flexible Plumbing 3-13 Polybutylene Pipe 3 Demountable
PLASTICA ALFA. Compression. Fittings. Pipe Saddles. For use. with. Polyethylene. Pipe PRODUCT CATALOGUE PROUDLY IMPORTED BY.
Compression PRODUCT CATALOGUE Fittings & Pipe Saddles For use with Polyethylene Pipe DPI Trading PROUDLY IMPORTED BY www.dpitrading.co.za www.incledon.co.za Technical Information Body: black polypropylene
Safety Stations with Eye/Face Wash
Safety Stations with ye/face Wash F G1950 Safety Station with ye/face Wash, Stainless Steel owl pplication: ombination eye/face wash and shower safety station. Two large FS-Plus spray-type outlet heads
AFA TS GmbH - Werner von Siemens Str.3 - D Grafenberg Copyright 2009 Tel.: +49(0) Fax: +49(0)
AFA TS GmbH - Werner von Siemens Str.3 - D-72661 Grafenberg Copyright 2009 Tel.: +49(0)7123-97382-0 - Fax: +49(0)7123-97382-90 - E-Mail: mail@afa-ts.de Page 1-15 www.afa-ts.com Exhaust Extraction Systems
HAWLE-specification water
water GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN HAWLE - Epoxy Powder-Coating High quality corrosion
MATERIAL SPECIFICATIONS AND BID PROPOSAL SHEET
CATEGORY 1: STEEL COUPLINGS 0 ¾" Steel Couplings (Smith-Blair #411-0501-003) 20 1" Steel Couplings (Smith-Blair #411-013201-003) 20 1¼" Steel Couplings (Smith-Blair #411-016601-003) 20 2" Steel Couplings
Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30)
Shipbuilding OSNA -10 and OSNA -30 Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30) KME Germany GmbH & Co. KG Shipbuilding - OSNA -10 and OSNA -30 [EN] Content KME - The Company
New! NiroTherm. Premium solution for corrosive environments. exclusively from SANHA
NiroTherm New! = Tool Compatibility + Push & Stay + Leak Path Feature exclusively from SANHA Premium solution for corrosive environments Optimal for heating, cooling and compressed air installations high
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome 2 is
PLASTICA ALFA. Compression. Fittings. Pipe Saddles. For use. with. Polyethylene. Pipe. DPI Trading PRODUCT CATALOGUE PROUDLY IMPORTED BY
Compression PRODUCT CATALOGUE Fittings & Pipe Saddles For use with Polyethylene Pipe DPI Trading PROUDLY IMPORTED BY www.dpitrading.co.za www.incledon.co.za Technical Information Body: black polypropylene
Safety Stations with Eyewash
Safety Stations with yewash F G1942 Safety Station with yewash, Freeze and Scald Protection Valves pplication: ombination eyewash and shower safety station. Unit is furnished with temperature-actuated
BALL VALVES ELECTROFUSION CONTROL BOXES & TOOLING. Available in standard sizes 32mm to 225mm and full port 20mm to 125mm.
rochure LL VLVES vailable in standard sizes 32mm to 225mm and full port 20mm to 125mm. See separate brochure further details. ELECTROFUSION CONTROL OXES & TOOLING Contact us further inmation on our extensive
product catalogue Q215 ISO 9001:2008 certified
product catalogue Q215 ISO 9001:2008 certified Haelok the company Haelok Inc, the inventor of one of the world strongest mechanical pipe connection, is a Zurich, Switzerland based privately held company,
Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, Haz Duct and bridge hangers for electrical and mechanical markets.
Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, Haz Duct and bridge hangers for electrical and mechanical markets. Champion Fiberglass began production of epoxy fiberglass
Product and installation manual. Underfloor Heating Composite Manifold
Product and installation manual Composite Manifold Contents Introduction 2 Manifold Overview 3 Manifold Design 3 Manifold Dimensions 3 Manifold Installation 4-9 Pack Requirements 4 Required Tools 4 General
DK/CP DN PVC-U / PVC-C / PP-H / PVDF. Pneumatically actuated 2-way diaphragm valve
PVC-U / PVC-C / PP-H / PVDF Pneumatically actuated 2-way diaphragm valve DK/CP DN 15 32 The new DK/CP diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids.
CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
SITRANS F C. Flow sensor MC2 4/193. Overview
Siemens G 2011 low Measurement SITNS C Overview The main applications of the Coriolis flowmeter can be found in all industries, such as: Chemical and pharma Detergents, bulk chemicals, pharmaceuticals,
INSERTION Adaptor for analysis
INSERTION Adaptor for analysis Type can be combined with... Universal adaptor for type 8202 and 8222 ELEMENT s in pure, aggressive or contaminated liquids Adaptation into standard piping systems or conversion
Precision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
6. Butterfly Valves & Accessories
1. Plastic Pipes 2. Steel Pipes 3. Penetration Tubes 4. Piping Accessories 5. Needle Valves 6. Butterfly Valves & Accessories 7. Miscellaneous Valves 7 1. PLASTIC PIPES TYPES OF PLASTIC PIPES ADAPTATOR
PIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
3A SANITARY WELDED PIPE-FITTINGS
- SNITY FITTINS 3 SNITY WEE PIPE-FITTINS W1001 W1002 W1003 W1004 W1005-1 3 1 45 - Short type ong type Short type ong type 3 Welded Elbow (90 ) 1 1/2" 12.7 19.1 38 19.1 3/4" 19.1 28.5 38 28.5 1" 25.4 38.1
Series ZX. Cylinders > rodless cylinders > Technical details. Versions. Order code ZX- ** - ** - **** - **
Cylinders > rodless cylinders > Technical details Operating pressure Temperature range Medium 1... 8 bar -10 C... +70 C Filtered, oil-free and dried compressed air according to ISO 8573-1:2010, Class 7:2:4,
Pressure reduction controllers (PN 25) AVDS - for steam AVD - for water
Data sheet Pressure reduction controllers (PN 25) - for steam AVD - for water Description Main data AVD: DN 15-50 k VS 0,4-25 m 3 /h PN 25 Setting range: 1-5 bar / 3-12 bar Temperature: - Circulation water/glycolic
1) Has a long service life, and is highly resistant to high temperature. 2) Elutes no hazardous substance, resists red and green rusts to prevent the water pollution, and is hygienic over a long period
Data sheet Compression fittings
Data sheet Compression fittings Regler- und Armaturen-Gesellschaft mbh & Co. KG Obernbreiter Straße 2-18 97340 Marktbreit / Germany Telefon: +49 9332 404-0 Telefax: +49 9332 404-49 E-Mail: info@gok-online.de
upvc PRESSURE AND COMPRESSION FITTINGS
upvc PRESSURE AND COMPRESSION FITTINGS Company Profile Proplastics is the leading supplier of world class plastic pipe systems for water and sewer reticulation in Southern Africa. Established in 1965,
Applicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
InoxSabiana 50 Flues Stainless Steel Double Wall ENVIRONMENTAL COMFORT
Flues Stainless Steel Double Wall ISO 9001 - Cert. n 0545/4 Unit heaters Radiant panels Fan coils Air handling units Flues ENVIRONMENTAL COMFORT Introduction and main constructional characteristics Double
Wall thickness Class 1 Class 2 Class 3 Class kgf/cm² 9.19 kgf/cm² kgf/cm² kgf/cm² Nominal outside diameter.
PVC-U PRESSURE PIPE SYSTEMS For drinking Water- Omani Standard OS 85/1985 Wall thickness Class 1 Class 2 Class 3 Class 4 6.12 kgf/cm² 9.19 kgf/cm² 12.25 kgf/cm² 15.30 kgf/cm² Nominal outside diameter Tolerance
ProfileSolutions ALUMINIUM PROFILE & ACCESSORIES LEAK DETECTION + AUTOMATION TECHNOLOGY
Solutions EAK DETECTION + AUTOMATION TECHNOOGY AUMINIUM PROFIE & ACCESSORIES Our aluminium profiles are manufactured using high grade A6N0S-T aluminium and provided with longitudinal slots used to house
in stainless steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in stainless steel 316L Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8,
Hawle Haku PE Pipe Saddle
Hawle Haku PE Pipe Saddle Scan for more information Technical Guide W9.1 Specifically designed as a PE mechanical connection solution. Suitable for PE pipes of all pressure ratings up to PN 16. DN40-360.
ROCKBREAKER BOOM SYSTEM
ROCKBREAKER BOOM SYSTEM DRIVING INCREASES IN PRODUCTIVITY AND WORK SAFETY ON CRUSHING LINES IN QUARRIES THE NEW DAVON BRAND MINING AND CONSTRUCTION TECHNOLOGY ABOUT THE COMPANY Since its foundation in
CATALOGUE. Metzerplas
CATALOGUE Metzerplas C E R T I F I C A T I O N 3 SP pipe is approved by standards institutes around the world Institute Certificate No. Product Standard Country IAPMO 4755 Pex-Al-Pex Composite pressure
standard and industrial pipe fittings
fittings mm sizes standard and industrial pipe fittings Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings from 6 bars to 16 bars,
GEAR MOTORS. from 500 to 4000 RPM
Displacement Pressure Speed from 2,00 to 15,00 ccm up to 300 bar from 500 to 4000 PM GEA MOTOS TAE OF CONTENTS Table of Contents DESCIPTION... 2 ASIC PATS... 2 PAAMETE TAE... 3 FOMUAS USED FO CACUATION...
Pressure relief controller AVA (PN 25)
Data sheet Pressure relief controller AVA (PN 25) Description AVA is a self-acting pressure relief controller primarily for use in district heating systems. The controller is normally closed and opens
PIGGING PRODUCTS. Capex supply. PIG LAUNCHER and RECEIVER
PIGGING PRODUCTS Capex supply PIG LAUNCHER and RECEIVER Before Cleaning After Cleaning TYPES OF PIGS DISPLACEMENT AND BATCHING PIGS AND PIG WITH BLADES (FOR CLEANING) 2 to 6 3 and 4 PIG with blades 5 to