Phone: / Common applications for solar-powered remote data acquisition and equipment monitoring are:

Transcription

1 SOLAR POWER Cmmn applicatins fr slar-pwered remte data acquisitin and equipment mnitring are: Oil and gas Pipelines, wells, flw measurement, cntrl valves Telecmmunicatins Signal pwer and Data Transmissin Water cllectin, treatment and distributin Pump statin, water flw, quality, turbidity Wastewater Lift statin and pumping Public wrks and infrastructure Rads, bridges, dams, canals, tunnels,cameras, Wi- Fi Twer, Bus Shelters, Billbards etc Landfill Flare, methane, effluent, leach ate Remte pwer Mbile and standby generatr, pwer quality, failure alarm Public health Emissins, txins, cntaminants (air, water, land) Science and research Envirnmental/climate change studies. Measure air, water and land. Weather frecasting Meterlgical statin, water flw, ice mvement HOW SOLAR WORKS: Features and Benefits Unsurpassed Industry Experience Our Manufacturer has ver 28 years f experience They are the pineer f the slar electric lighting industry in Flrida and the Glbe. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 1

2 Slar Electric Pwer Assemblies Riveted aluminum frames and vented panel pans w/ welded rear channel munting brackets Allws fr durability while prviding flexibility during harsh cnditins Prtects back f slar panels and electrical cnnectins frm the elements Liquid tight cnnectrs and flex tube Creates a water tight cnnectin frm the panel array t the battery bx Vented aluminum battery strage assembly Added prtectin fr batteries and cntrl electrnics Full wire harness w/ battery cables and quick cnnect terminals All wiring pre-designed with easy t fllw manual All cmpnents easily plug tgether Decreased installatin time Unique welded ne piece pwer bracket Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 2

3 Allws fr tilting the slar panel assembly at 5, 15, r 45 fr maximum sun expsure in all gegraphical lcatins Prvides a secure munting pint fr severe weather. Slar Pwer Assemblies Riveted Aluminum Frames and Vented Panel Pans w/ Welded Rear Channel Munting Brackets Allws fr durability, while prviding flexibility in harsh cnditins Prtects back f slar panels and electrical cnnectins frm the elements Liquid Tight Cnnectrs and Flex-Tube Creates a water tight cnnectin frm the panel array t the battery bx High-Gauge Vented Aluminum Battery Strage Assembly Added prtectin fr batteries and all cntrl electrnics Full Wire Harness w/ Battery Cables and Quick Cnnect Terminals All wiring pre-designed with easy t fllw manual All cmpnents easily plug tgether Decreased installatin time Unique Welded One Piece Pwer Bracket Allws fr tilting the slar panel assembly at 5, 15, r 45 degrees fr maximum sun expsure in all gegraphical lcatins Prvides a secure munting pint fr severe weather cnditins Meets AASHTO wind frce requirements Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 3

4 Slar Mdules Single Crystal Slar Panels Designed fr highest durability Allws fr smallest size and weight fr desired utput Output pwer tlerance f +/- 5% Deka Deep-Cycle Slar Phtvltaic Batteries Maintenance Free High Durability Sealed Gel-Cell Nn-Spill able, Nn Hazardus Air-shippable N special cntainers needed fr transprt Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 4

5 Slar Lighting Fixtures Diverse line f many different fixtures fr use in almst any applicatin Relatinships with industry leading manufacturers such as Hubbell Outdr, Beacn Prducts, Architectural Area Lighting, Spaulding Lighting, and Kim Lighting Available fr signs, parking lts, streets, areas, security lightings, and mre Reflectrs designed t maximize light utput Highly secular aluminum plished fr peak perfrmance Lamps psitined in reflectr center fr ptimum light distributin Manufacturer supplied phtmetry Prvide technical data as well as visualizatins f light levels Able t uplad CAD s in rder t ptimize lighting plans Light Emitting Dide (LED) High efficiency and delivers ver 100 lumens per watt. Lnger life span with ver 50,000 f life expectancy Envirnmentally friendly mercury free cnstructin LED and Slar are perfect as they perate frm the same lw vltage DC pwer surce Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 5

6 High Perfrmance Lamps Target efficient light surce Light Emitting Dide (LED) Lwer Wattage requirements and Lwer pwer cnsumptin Dimming ptins available Instant On / N Flicker Nn-Txic as LEDs cntain n lead r mercury and is recyclable Full cutff features allwing n light pllutin and cmplies with Dark Sky cmpliances Over 50,000 hur lifespan N ballast changes needed Better clr rendering fr security cameras Cmpact Flurescent Lamps (CFL) Best cmbinatin f lw cst, lng life, and lumens per Watt Over 20,000 hur lifespan Field prven lifespan f 5 t 7 years Available in clr temperatures frm 2,700 K t 6,500 K Available in 5 t 65 Watts Readily available LPS, HPS, and MH Als Available Cmmn Terms Current a flw f electrical energy Dide a device thrugh which electrical current can mve freely nly in ne directin Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 6

7 Electrn subatmic particle having a negative charge Inverter a device capable f cnverting electrical energy frm DC t AC r vice versa. Phtvltaic prduces electrical vltage when expsed t light Semicnductr a crystalline substance having electrical cnductivity smewhere between a cnductr and an insulatr Silicn a nnmetallic element used ften as a semicnductr Basics Slar pwer is the technlgy f harnessing usable energy frm the sun. Slar panels are made up f phtvltaic (PV) cells. A mdule is a grup f cells electrically cnnected and packaged in ne frame. PV cells are cmpsed f special materials called semicnductrs, mst cmmnly silicn. When energy in the frm f heat frm the sun is added t the silicn, it causes electrns t break free frm their rbit arund the nuclei f the silicn atms. These atms are left with a psitive charge, while the electrns carry a negative charge. The electrns, r free carriers, carry an electrical current. The free carriers ram arund until they find atms lacking an electrn and then fall int the rbit f these atms. The electric field surrunding the slar cells acts as a dide allwing electrns t flw in a certain directin. This flw is an electrical current. When using metal n the tp and bttm f the cells, we can direct that current t be usable utside f the panel. Energy Strage A slar pwer system requires an energy strage unit called a battery in rder t use the energy btained thrughut the day. The batteries need t be deep-cycle, which can discharge a great prtin f their stred energy while maintaining a lng lifespan. The batteries are 100% recyclable and qualify as nn-hazardus gds fr air, land, and sea shipment. The use f batteries requires a charge cntrller. The charge cntrller ensures that the batteries are nt vercharged during the day r drained t much at night. Once the battery has been drained dwn t a certain level, the cntrller will nt allw mre current t be drained in rder t prtect the battery frm damage. Current The electricity prduced by the slar pwer system is direct current r DC. These systems can run DC electric devices directly. If the device requires AC, ur manufacturer prduct line ffers an inverter upgrade t run these devices. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 7

8 Lighting Terminlgy Watt A quantifiable measure f pwer cnsumed Lumen A quantifiable measurement f ttal pwer f light emitted Ft Candle (FC) A unit f illuminatin f ne square meter which is ne meter away frm a unifrm light surce. 1 FC = 1 Lumen / Square Ft Kelvin Kº (clrs f light) measured in degrees, is a quantifiable measure f clr temperature Min Minimum amunt f light Max Maximum measurement f light Unifrm Lighting that has even illuminatin acrss an area with a lw min t max lighting rati Spacing measurement f space usually in feet frm ne light ple t the next Clr Renditin Index (CRI) a way t assess hw light surces make bjects appear. Any CRI greater than 80 has gd clr prperties Average Rated Life referred t in lamp life is actually the median Munting Height the measurement frm the grund t the light surce Distributin (I-V) Determines hw far light is emitted t each side f a fixture and t the frnt (street side) and back (huse side) Type I lng linear pattern, lng distance t the sides with a shrt pattern ut t the frnt and back Type II Prgressively grwing distance t the frnt and back and shrtening f the linear sides Type III mst cmmnly available in mst fixture types has a perfect val shape Type IV has a mre circular pattern with linear sides that extend farther n the sides Type V Rund circular pattern same distance frm frnt t back and side t side Optics fr Streetlights cntrl f light distributin Nn-cutff light is emitted in all directins Semi-cutff mst f the light is emitted belw 90 degrees Cutff cntrlled lighting where less than 2.5% f the light is allwed t escape the fixture abve 90 degrees Full-cutff used in dark sky friendly lcatins, ptics put the light n the grund belw the fixture nt allwing light t emit abve 90 degrees Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 8

9 Slar Pwer Systems Slar pwer is becming the g t pwer surce fr mst prjects. Our manufacturer ffers a wide variety f slar pwer statins fr stand alne pwer applicatins that ffer an envirnmentally friendly alternative t standard electrical pwer. Our systems range frm 10 Watts t 425 Watts, and can als be integrated tgether fr an even higher pwer utput fr larger applicatins. The slar electric pwer assemblies prvide pwer n a 24/7 basis at any vltage r current required and include ur patented LCU1 lad cmputer unit with many different cntrl ptins. T ensure lng life and reliability, ur manufacturer s design team will be glad t assist yu in selecting the system size. The Slar Electric Pwer Assemblies are used fr applicatins such as: Wi-Fi; Cmmunicatins; RTU/SCADA; Oil, Gas, and Water Flw Meters; DATA Acquisitin; Seismic Mnitring; Cathlic Prtectin; Camera Security; Remte Security; Railrad Applicatins; Stand-By Pwer; and Industrial, Cmmercial, Military, and Gvernment Operatinal Applicatins. Slar Lighting Fixtures All f ur belw lighting fixtures have been designed t run frm ur slar pwer systems. Chse the fixture that best suit yur applicatin and let ne f ur slar lighting specialists knw by using the frm t the left. We are wrking hard t get specificatins nline t prvide additinal infrmatin n the belw fixtures. Overhead Slar Lighting Overhead slar lights are an efficient means t prvide lighting and cntinuus pwer with n utility lines. They prvide cst savings by eliminating the need t trench wires and the recurring cst f pwer bills after installatin. Overhead slar lights have been installed n highways, freeways, neighbrhd streets, parking lts, rural rads, parks, bat ramps, pathways, perimeters, jgging paths, and many ther applicatins. These slar lights prvide security, sustainability, and an verall green image. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 9

10 Every verhead slar light cmes cmplete with a slar pwer system ranging frm 10 Watts t 425 Watts, slar battery assembly t pwer the light fr a minimum fur days autnmy, fixture munting bracket, and cntrl electrnics. Varius fixture styles are available fr all applicatins. Please cnsult a manufacturing representative fr assistance with yur prject. Our slar lighting specialists ptimize each prject design by crss referencing the lcatin with prvided Aut-CAD files, Ggle Earth, and prject specificatins t make sure every system will prvide flawless peratin and perfrmance. Features and Benefits Include: Cmprehensive System Warranty LED, CFL, LPS, HPS, and MH Lamp Optins N Trenching Grid Free Operatin / N Electric Csts Easy Installatin Envirnmentally Friendly Safe Lw Vltage DC Pwer AASHTO Wind Lad Ratings Overhead Lighting Overhead lighting systems are perfect fr highways, freeways, neighbrhd streets, parking lts, rural rads, parks, bat ramps, pathways, perimeters, jgging paths, security lights and many ther applicatins. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 10

11 SLR Cbra head SLC Cbra head Cimarrn LED Cimarrn CFL Genesis Curser Palmar Dallas Slar Lighting Fixtu Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 11

12 Decrative Lighting Pier walk Urban Metrplis Lndn Slide Fld / Landscape / Pathway / Flag Lighting Laramie FL1 Palm Beach Metr In grade Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 12

13 Wall / Ceiling Lighting Lared NRG Canpy Eurluxe Endura Traverse Slar Pwer Assemblies Small Slar Pwer System Figure 1: SYSTEMS SEPA10, SEPA20, SEPA30, SEPA50 Our small slar pwer systems prvide pwer fr smaller applicatins r where dusk t dawn Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 13

14 lighting is nt required. They are cmprised f a single slar panel, slar battery assembly, cntrl electrnics, and system munting bracket. SEPA10 Slar Pwer System System Features: The SEPA10 slar electric pwer assembly features a 10 Watt slar panel that is mechanically riveted t the battery bx lid fr munting. The 36 Amp hurs battery is cntained within a vented aluminum battery bx and includes a wiring harness and cntrl electrnics. There are 14 different cntrllers t chse fr different types f applicatins such as dusk t dawn dusk activated, mtin detectr, etc. The systems are built fr easy installatins with quick cnnect terminals and can be munted t a wall, rf, r ple. Every system is available t prduce DC r AC pwer depending n the needs f the device. Meets AASHTO 150 mph wind frce ratings. Pwder cating and custm design available. 5 year maintenance free and system warranty. Panel Assembly A 10 Watt single array cnsists f ne 10 Watt mdule which is integrally munted upn and pwer riveted t a vented aluminum battery bx cver and terminated in pre-wired 3 prng Mlex type cnnectr. Slar array prduces.63 amps charge current and measures 17.4 L x 11.4 W x 2.1 D. The array has a 10 year warranty fr 10% pwer lss and 25 year warranty fr 20% pwer lss. Slar array has a life cycle testing and actual field prven life f ver 30 years. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 14

15 Battery Assembly A vented aluminum bx cntaining a 36 amp hur sealed GEL battery which is integrally munted and pre-wired t include a standard wire harness with simple plug in cnnectins fr the LCU1 Lighting Cmputer/Cntrl Unit and the slar panel assembly. The lw prfile design cntains a prefrmed and welded back munting plate fr easy slide n attachment t the pwer bracket. Battery assembly is unique Thrugh the Ple rear wire ruting utput fr n expsed wiring t prvide a neat clean appearance fr the finished installatin. Battery assembly is cmplete with all stainless steel munting hardware. All metal crafting has been perfrmed by high speed rbtic presses using cmputer prgrammed instructins. Pwer Bracket Aluminum pwer bracket cnsists f a substantial aluminum channel fr munting t any ple r wall and prviding a lw prfile, nly 20 n the ple, t prvide maximum strength fr wind lading in excess f 150 MPH. The pwer bracket cntains predrilled and tapped battery slide munt blts f stainless steel and tw 11/16 munting hles fr utility standard 5/8 munting blts. The bracket cntains the unique Thrugh the Ple battery wire hle fr n expsed system wiring. Our manufacturer f slar electric pwer assemblies have prven themselves as the mst rugged and rbust design in thusands f installatins wrldwide since their intrductin in These systems surpass all cdes, cmpliances, and quality cntrls. SEPA20 Slar Pwer System Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 15

16 System Features: The SEPA20 slar electric pwer assembly features a 20 Watt slar panel that is mechanically riveted t the battery bx lid fr munting. The 36 Amp hurs battery is cntained within a vented aluminum battery bx and includes a wiring harness and cntrl electrnics. There are 14 different cntrllers t chse fr different types f applicatins such as dusk t dawn dusk activated, mtin detectr, etc. The systems are built fr easy installatins with quick cnnect terminals and can be munted t a wall, rf, r ple. Every system is available t prduce DC r AC pwer depending n the needs f the device. Meets AASHTO 150 mph wind frce ratings. Pwder cating and custm design available. 5 year maintenance free and system warranty. Panel Assembly A 20 Watt single array cnsists f ne 20 Watt mdule which is integrally munted upn and pwer riveted t a vented aluminum battery bx cver and terminated in pre-wired 3 prng Mlex type cnnectr. Slar array prduces 1.2 amps charge current and measures 21.3 L x 17.7 W x 2.1 D. The array has a 10 year warranty fr 10% pwer lss and 25 year warranty fr 20% pwer lss. Slar array has a life cycle testing and actual field prven life f ver 30 years. Battery Assembly A vented aluminum bx cntaining a 36 amp hur sealed GEL battery which is integrally munted and pre-wired t include a standard wire harness with simple plug in cnnectins fr the LCU1 Lighting Cmputer/Cntrl Unit and the slar panel assembly. The lw prfile design cntains a prefrmed and welded back munting plate fr easy slide n attachment t the pwer bracket. Battery assembly is unique Thrugh the Ple rear wire ruting utput fr n expsed wiring t prvide a neat clean appearance fr the finished installatin. Battery assembly is cmplete with all stainless steel munting hardware. All metal crafting has been perfrmed by high speed rbtic presses using cmputer prgrammed instructins. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 16

17 Pwer Bracket Aluminum pwer bracket cnsists f a substantial aluminum channel fr munting t any ple r wall and prviding a lw prfile, nly 20 n the ple, t prvide maximum strength fr wind lading in excess f 150 MPH. The pwer bracket cntains predrilled and tapped battery slide munt blts f stainless steel and tw 11/16 munting hles fr utility standard 5/8 munting blts. The bracket cntains the unique Thrugh the Ple battery wire hle fr n expsed system wiring. Our manufacturer f slar electric pwer assemblies have prven themselves as the mst rugged and rbust design in thusands f installatins wrldwide since their intrductin in These systems surpass all cdes, cmpliances, and quality cntrls. SEPA30 Slar Pwer System System Features: The SEPA30 slar electric pwer assembly features a 30 Watt slar panel that is mechanically riveted t the battery bx lid fr munting. The 36 Amp hurs battery is cntained within a vented aluminum battery bx and includes a wiring harness and cntrl electrnics. There are 14 different cntrllers t chse fr different types f applicatins such as dusk t dawn dusk activated, mtin detectr, etc. The systems are built fr easy installatins with quick cnnect terminals and can be munted t a wall, rf, r ple. Every system is available t prduce DC r AC pwer depending n the needs f the device. Meets AASHTO 150 mph wind frce ratings. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 17

18 Pwder cating and custm design available. 5 year maintenance free and system warranty. Panel Assembly A 30 Watt single array cnsists f ne 30 Watt mdule which is integrally munted upn and pwer riveted t a vented aluminum battery bx cver and terminated in pre-wired 3 prng Mlex type cnnectr. Slar array prduces 1.72 amps charge current and measures L x W x 2.1 D. The array has a 10 year warranty fr 10% pwer lss and 25 year warranty fr 20% pwer lss. Slar array has a life cycle testing and actual field prven life f ver 30 years. Battery Assembly A vented aluminum bx cntaining a 36 amp hur sealed GEL battery which is integrally munted and pre-wired t include a standard wire harness with simple plug in cnnectins fr the LCU1 Lighting Cmputer/Cntrl Unit and the slar panel assembly. The lw prfile design cntains a prefrmed and welded back munting plate fr easy slide n attachment t the pwer bracket. Battery assembly is unique Thrugh the Ple rear wire ruting utput fr n expsed wiring t prvide a neat clean appearance fr the finished installatin. Battery assembly is cmplete with all stainless steel munting hardware. All metal crafting has been perfrmed by high speed rbtic presses using cmputer prgrammed instructins. Pwer Bracket Aluminum pwer bracket cnsists f a substantial aluminum channel fr munting t any ple r wall and prviding a lw prfile, nly 20 n the ple, t prvide maximum strength fr wind lading in excess f 150 MPH. The pwer bracket cntains predrilled and tapped battery slide munt blts f stainless steel and tw 11/16 munting hles fr utility standard 5/8 munting blts. The bracket cntains the unique Thrugh the Ple battery wire hle fr n expsed system wiring. Our manufacturer f slar electric pwer assemblies have prven themselves as the mst rugged and rbust design in thusands f installatins wrldwide since their intrductin in These systems surpass all cdes, cmpliances, and quality cntrls. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 18

19 SEPA50 Slar Pwer System System Features: The SEPA50 slar electric pwer assembly features a 50 Watt slar panel that is mechanically riveted t the battery bx lid fr munting. The 82 Amp hurs battery is cntained within a vented aluminum battery bx and includes a wiring harness and cntrl electrnics. There are 14 different cntrllers t chse fr different types f applicatins such as dusk t dawn dusk activated, mtin detectr, etc. The systems are built fr easy installatins with quick cnnect terminals and can be munted t a wall, rf, r ple. Every system is available t prduce DC r AC pwer depending n the needs f the device. Meets AASHTO 150 mph wind frce ratings. Pwder cating and custm design available. 5 year maintenance free and system warranty. Panel Assembly A 50 Watt single array cnsists f ne 50 Watt mdule which is integrally munted upn and pwer riveted t a vented aluminum battery bx cver and terminated in pre-wired 3 prng Mlex type cnnectr. Slar array prduces 3.15 amps charge current and measures 33.8 L x 26 W x 1.4 D. The array has a 10 year warranty fr 10% pwer lss and 25 year warranty fr 20% pwer lss. Slar array has a life cycle testing and actual field prven life f ver 30 years. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 19

20 Battery Assembly A vented aluminum bx cntaining an 82 amp hur sealed GEL battery which is integrally munted and pre-wired t include a standard wire harness with simple plug in cnnectins fr the LCU1 Lighting Cmputer/Cntrl Unit and the slar panel assembly. The lw prfile design cntains a prefrmed and welded back munting plate fr easy slide n attachment t the pwer bracket. Battery assembly is unique Thrugh the Ple rear wire ruting utput fr n expsed wiring t prvide a neat clean appearance fr the finished installatin. Battery assembly is cmplete with all stainless steel munting hardware. All metal crafting has been perfrmed by high speed rbtic presses using cmputer prgrammed instructins. Pwer Bracket Aluminum pwer bracket cnsists f a substantial aluminum channel fr munting t any ple r wall and prviding a lw prfile, nly 20 n the ple, t prvide maximum strength fr wind lading in excess f 150 MPH. The pwer bracket cntains predrilled and tapped battery slide munt blts f stainless steel and tw 11/16 munting hles fr utility standard 5/8 munting blts. The bracket cntains the unique Thrugh the Ple battery wire hle fr n expsed system wiring. Our manufacturer f slar electric pwer assemblies have prven themselves as the mst rugged and rbust design in thusands f installatins wrldwide since their intrductin in These systems surpass all cdes, cmpliances, and quality cntrls. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 20

21 Slar Pwer Assemblies Medium Slar Pwer System Figure 2 : SYSTEMS SEPA85, SEPA110, SEPA125 The medium slar pwer systems prvide pwer fr a wide range f applicatins. They are cmprised f a single slar panel, slar battery assembly, cntrl electrnics, and single system munting bracket. SEPA85 Slar Pwer System System Features: The SEPA85 slar electric pwer assembly features a 85 Watt slar panel, full prtective panel pan, and single supprt pwer bracket. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 21

22 The 82 Amp hurs battery is cntained within a vented aluminum battery bx and includes a wiring harness and cntrl electrnics. There are 14 different cntrllers t chse fr different types f applicatins such as dusk t dawn dusk activated, mtin detectr, etc. The systems are built fr easy installatin with quick cnnects terminals and can be munted t a wall, rf, r ple. Every system is available t prduce DC r AC pwer depending n the needs f the device. Meets AASHTO 150 mph wind frce ratings. Pwder cating and custm design available. 5 year maintenance free and system warranty. Panel Assembly A 85 Watt single array cnsists f ne 85 Watt mdule which is integrally munted upn and pwer riveted t a vented aluminum panel pan featuring full panel backside damage preventin, welded substantial aluminum munting rails, pwer riveted aluminum end rails and terminated in pre-wired 3 prng Mlex type cnnectr. Slar array prduces 5 amps charge current and measures 47.3 L x 20.8 W x 2.1 D. The array has a 10 year warranty fr 10% pwer lss and 25 year warranty fr 20% pwer lss. Slar array has a life cycle testing and actual field prven life f ver 30 years. Battery Assembly A vented aluminum bx cntaining an 82 amp hur sealed GEL battery which is integrally munted and pre-wired t include a standard wire harness with simple plug in cnnectins fr the LCU1 Lighting Cmputer/Cntrl Unit and the slar panel assembly. The lw prfile design cntains a prefrmed and welded back munting plate fr easy slide n attachment t the pwer bracket. Battery assembly is unique Thrugh the Ple rear wire ruting utput fr n expsed wiring t prvide a neat clean appearance fr the finished installatin. Battery assembly is cmplete with all stainless steel munting hardware. All metal crafting has been perfrmed by high speed rbtic presses using cmputer prgrammed instructins. Pwer Bracket A cmplete aluminum, unique single supprt 5/15/45 degree pwer bracket cnsists f a substantial aluminum channel affrding munting t any ple r wall. Welding f strng schedule aluminum pipe in a single supprt arrangement t prvide maximum strength Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 22

23 fr wind lading. The pwer bracket cntains predrilled and tapped battery slide munt blts f stainless steel and tw 11/16 munting hles fr utility standard 5/8 munting blts. The bracket cntains the unique Thrugh the Ple battery wire hle fr n expsed system wiring. Our manufacturer f slar electric pwer assemblies have prven themselves as the mst rugged and rbust design in thusands f installatins wrldwide since their intrductin in These systems surpass all cdes, cmpliances, and quality cntrls. SEPA110 Slar Pwer System System Features: The SEPA110 slar electric pwer assembly features a 110 Watt slar panel, full prtective panel pan, and single supprt pwer bracket. The 112 Amp hurs battery is cntained within a vented aluminum battery bx and includes a wiring harness and cntrl electrnics. There are 14 different cntrllers t chse fr different types f applicatins such as dusk t dawn dusk activated, mtin detectr, etc. The systems are built fr easy installatins with quick cnnect terminals and can be munted t a wall, rf, r ple. Every system is available t prduce DC r AC pwer depending n the needs f the device. Meets AASHTO 150 mph wind frce ratings. Pwder cating and custm design available. 5 year maintenance free and system warranty. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 23

24 Panel Assembly A 110 Watt single array cnsists f ne 110 Watt mdule which is integrally munted upn and pwer riveted t a vented aluminum panel pan featuring full panel backside damage preventin, welded substantial aluminum munting rails, pwer riveted aluminum end rails and terminated in pre-wired 3 prng Mlex type cnnectr. Slar array prduces 6.6 amps charge current and measures 58.1 L x 26 W x 2.1 D. The array has a 10 year warranty fr 10% pwer lss and 25 year warranty fr 20% pwer lss. Slar array has a life cycle testing and actual field prven life f ver 30 years. Battery Assembly A vented aluminum bx cntaining a 112 amp hur sealed GEL battery which is integrally munted and pre-wired t include a standard wire harness with simple plug in cnnectins fr the LCU1 Lighting Cmputer/Cntrl Unit and the slar panel assembly. The lw prfile design cntains a prefrmed and welded back munting plate fr easy slide n attachment t the pwer bracket. Battery assembly is unique Thrugh the Ple rear wire ruting utput fr n expsed wiring t prvide a neat clean appearance fr the finished installatin. Battery assembly is cmplete with all stainless steel munting hardware. All metal crafting has been perfrmed by high speed rbtic presses using cmputer prgrammed instructins. Pwer Bracket An all aluminum, unique single supprt 5/15/45 degree pwer bracket cnsists f a substantial aluminum channel affrding munting t any ple r wall. Circumference welding f strng schedule aluminum pipe in a single supprt arrangement that prvide maximum strength fr wind lading. The pwer bracket cntains predrilled and tapped battery slide munt blts f stainless steel and tw 11/16 munting hles fr utility standard 5/8 munting blts. The bracket cntains the unique Thrugh the Ple battery wire hle fr n expsed system wiring. Our manufacturer f slar electric pwer assemblies have prven themselves as the mst rugged and rbust design in thusands f installatins wrldwide since their intrductin in These systems surpass all cdes, cmpliances, and quality cntrls. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 24

25 SEPA125 Slar Pwer System System Features: The SEPA125 slar electric pwer assembly features a 125 Watt slar panel, full prtective panel pan, and single supprt pwer bracket. The 112 Amp hurs battery is cntained within a vented aluminum battery bx and includes a wiring harness and cntrl electrnics. There are 14 different cntrllers t chse fr different types f applicatins such as dusk t dawn dusk activated, mtin detectr, etc. The systems are built fr easy installatins with quick cnnect terminals and can be munted t a wall, rf, r ple. Every system is available t prduce DC r AC pwer depending n the needs f the device. Meets AASHTO 150 mph wind frce ratings. Pwder cating and custm design available. 5 year maintenance free and system warranty. Panel Assembly A 125 Watt single array cnsists f ne 125 Watt mdule which is integrally munted upn and pwer riveted t a vented aluminum panel pan featuring full panel backside damage preventin, welded substantial aluminum munting rails, pwer riveted aluminum end rails and terminated in pre-wired 3 prng Mlex type cnnectr. Slar array prduces 7.3 amps charge current and measures 59 L x 26 W x 2.1 D. The array has a 10 year warranty fr 10% pwer lss and 25 year warranty fr 20% pwer lss. Slar array has a life cycle testing and actual field prven life f ver 30 years. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 25

26 Battery Assembly A vented aluminum bx cntaining a 112 amp hur sealed GEL battery which is integrally munted and pre-wired t include a standard wire harness with simple plug in cnnectins fr the LCU1 Lighting Cmputer/Cntrl Unit and the slar panel assembly. The lw prfile design cntains a prefrmed and welded back munting plate fr easy slide n attachment t the pwer bracket. Battery assembly is unique Thrugh the Ple rear wire ruting utput fr n expsed wiring t prvide a neat clean appearance fr the finished installatin. Battery assembly is cmplete with all stainless steel munting hardware. All metal crafting has been perfrmed by high speed rbtic presses using cmputer prgrammed instructins. Pwer Bracket An all aluminum, unique single supprt 5/15/45 degree pwer bracket cnsists f a substantial aluminum channel affrding munting t any ple r wall. Circumference welding f strng schedule aluminum pipe in a single supprt arrangement t prvide maximum strength fr wind lading. The pwer bracket cntains predrilled and tapped battery slide munt blts f stainless steel and tw 11/16 munting hles fr utility standard 5/8 munting blts. The bracket cntains the unique Thrugh the Ple battery wire hle fr n expsed system wiring. Our manufacturer f slar electric pwer assemblies have prven themselves as the mst rugged and rbust design in thusands f installatins wrldwide since their intrductin in These systems surpass all cdes, cmpliances, and quality cntrls. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 26

27 Large Slar Pwer System Figure 3: SEPA170, SEPA225, SEPA300, SEPA340 The large slar pwer systems prvide pwer fr applicatins that require higher intensity r multiple slar lights. They are cmprised f tw r three slar panels, duble slar battery assembly, cntrl electrnics, and duble system munting bracket. SEPA170 Slar Pwer System System Features: The SEPA170 slar electric pwer assembly features tw 85 Watt slar panels integrated tgether, full prtective panel pan, and single supprt pwer bracket. The 164 Amp hurs battery assembly, cnsisting f tw 82 amp hur batteries, is cntained within a vented aluminum battery bx and includes a wiring harness and cntrl electrnics. There are 14 different cntrllers t chse fr different types f applicatins such as dusk t dawn dusk activated, mtin detectr, etc. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 27

28 The systems are built fr easy installatins with quick cnnect terminals and can be munted t a wall, rf, r ple. Every system is available t prduce DC r AC pwer depending n the needs f the device. Meets AASHTO 150 mph wind frce ratings. Pwder cating and custm design available. 5 year maintenance free and system warranty. Panel Assembly A 170 Watt single array cnsists f tw 85 Watt mdules which are integrally munted upn and pwer riveted t a vented aluminum panel pan featuring full panel backside damage preventin, welded substantial aluminum munting rails, pwer riveted aluminum end rails and terminated in pre-wired 3 prng Mlex type cnnectr. Slar array prduces 9.8 amps charge current and measures 48 L x 42 W x 2.1 D. The array has a 10 year warranty fr 10% pwer lss and 25 year warranty fr 20% pwer lss. Slar array has a life cycle testing and actual field prven life f ver 30 years. Battery Assembly A vented aluminum bx cntaining tw 82 amp hur sealed GEL batteries, ttaling 164 amp hurs, which is integrally munted and pre-wired t include a standard wire harness with simple plug in cnnectins fr the LCU1 Lighting Cmputer/Cntrl Unit and the slar panel assembly. The lw prfile design cntains a prefrmed and welded back munting plate fr easy slide n attachment t the pwer bracket. Battery assembly is unique Thrugh the Ple rear wire ruting utput fr n expsed wiring t prvide a neat clean appearance fr the finished installatin. Battery assembly is cmplete with all stainless steel munting hardware. All metal crafting has been perfrmed by high speed rbtic presses using cmputer prgrammed instructins. Pwer Bracket An all aluminum, unique duble supprt 5/15/45 degree pwer bracket cnsists f a substantial aluminum channel affrding munting t any ple r wall. Circumference welding f strng schedule aluminum pipe in a duble supprt arrangement t prvide maximum strength fr wind lading. The pwer bracket cntains predrilled and tapped battery slide munt blts f stainless steel and tw 11/16 munting hles fr utility standard 5/8 munting blts. The bracket cntains the unique Thrugh the Ple battery wire hle fr n expsed system wiring. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 28

29 Our manufacturer f slar electric pwer assemblies have prven themselves as the mst rugged and rbust design in thusands f installatins wrldwide since their intrductin in These systems surpass all cdes, cmpliances, and quality cntrls. SEPA225 Slar Pwer System System Features: The SEPA225 slar electric pwer assembly features three 75 Watt slar panels integrated tgether, full prtective panel pan, and single supprt pwer bracket. The 224 Amp hurs battery assembly, cnsisting f tw 112 amp hur batteries, is cntained within a vented aluminum battery bx and includes a wiring harness and cntrl electrnics. There are 14 different cntrllers t chse fr different types f applicatins such as dusk t dawn dusk activated, mtin detectr, etc. The systems are built fr easy installatins with quick cnnect terminals and can be munted t a wall, rf, r ple. Every system is available t prduce DC r AC pwer depending n the needs f the device. Meets AASHTO 150 mph wind frce ratings. Pwder cating and custm design available. 5 year maintenance free and system warranty. Panel Assembly A 225 Watt single array cnsists f three 75 Watt mdules which are integrally munted upn and pwer riveted t a vented aluminum panel pan featuring full panel backside damage preventin, welded substantial aluminum munting rails, pwer riveted aluminum end rails and terminated in pre-wired 3 prng Mlex type cnnectr. Slar array prduces amps charge Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 29

30 current and measures 48 L x 62 W x 2.1 D. The array has a 10 year warranty fr 10% pwer lss and 25 year warranty fr 20% pwer lss. Slar array has a life cycle testing and actual field prven life f ver 30 years. Battery Assembly A vented aluminum bx cntaining tw 112 amp hur sealed GEL batteries, ttaling 224 amp hurs, which is integrally munted and pre-wired t include a standard wire harness with simple plug in cnnectins fr the LCU1 Lighting Cmputer/Cntrl Unit and the slar panel assembly. The lw prfile design cntains a prefrmed and welded back munting plate fr easy slide n attachment t the pwer bracket. Battery assembly is unique Thrugh the Ple rear wire ruting utput fr n expsed wiring t prvide a neat clean appearance fr the finished installatin. Battery assembly is cmplete with all stainless steel munting hardware. All metal crafting has been perfrmed by high speed rbtic presses using cmputer prgrammed instructins. Pwer Bracket An all aluminum, unique duble supprt 5/15/45 degree pwer bracket cnsists f a substantial aluminum channel affrding munting t any ple r wall. Circumference welding f strng schedule aluminum pipe in a duble supprt arrangement t prvide maximum strength fr wind lading. The pwer bracket cntains predrilled and tapped battery slide munt blts f stainless steel and tw 11/16 munting hles fr utility standard 5/8 munting blts. The bracket cntains the unique Thrugh the Ple battery wire hle fr n expsed system wiring. Our manufacturer f slar electric pwer assemblies have prven themselves as the mst rugged and rbust design in thusands f installatins wrldwide since their intrductin in These systems surpass all cdes, cmpliances, and quality cntrls. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 30

31 SEPA255 Slar Pwer System System Features: The SEPA255 slar electric pwer assembly features three 85 Watt slar panels integrated tgether, full prtective panel pan, and single supprt pwer bracket. The 224 Amp hurs battery assembly, cnsisting f tw 112 amp hur batteries, is cntained within a vented aluminum battery bx and includes a wiring harness and cntrl electrnics. There are 14 different cntrllers t chse fr different types f applicatins such as dusk t dawn dusk activated, mtin detectr, etc. The systems are built fr easy installatins with quick cnnect terminals and can be munted t a wall, rf, r ple. Every system is available t prduce DC r AC pwer depending n the needs f the device. Meets AASHTO 150 mph wind frce ratings. Pwder cating and custm design available. 5 year maintenance free and system warranty. Panel Assembly A 255 Watt single array cnsists f three 85 Watt mdules which are integrally munted upn and pwer riveted t a vented aluminum panel pan featuring full panel backside damage preventin, welded substantial aluminum munting rails, pwer riveted aluminum end rails and terminated in pre-wired 3 prng Mlex type cnnectr. Slar array prduces 15.0 amps charge current and measures 48 L x 62 W x 2.1 D. The array has a 10 year warranty fr 10% pwer lss and 25 year warranty fr 20% pwer lss. Slar array has a life cycle testing and actual field prven life f ver 30 years. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 31

32 Battery Assembly A vented aluminum bx cntaining tw 112 amp hur sealed GEL batteries, ttaling 224 amp hurs, which is integrally munted and pre-wired t include a standard wire harness with simple plug in cnnectins fr the LCU1 Lighting Cmputer/Cntrl Unit and the slar panel assembly. The lw prfile design cntains a prefrmed and welded back munting plate fr easy slide n attachment t the pwer bracket. Battery assembly is unique Thrugh the Ple rear wire ruting utput fr n expsed wiring t prvide a neat clean appearance fr the finished installatin. Battery assembly is cmplete with all stainless steel munting hardware. All metal crafting has been perfrmed by high speed rbtic presses using cmputer prgrammed instructins. Pwer Bracket An all aluminum, unique duble supprt 5/15/45 degree pwer bracket cnsists f a substantial aluminum channel affrding munting t any ple r wall. Circumference welding f strng schedule aluminum pipe in a duble supprt arrangement t prvide maximum strength fr wind lading. The pwer bracket cntains predrilled and tapped battery slide munt blts f stainless steel and tw 11/16 munting hles fr utility standard 5/8 munting blts. The bracket cntains the unique Thrugh the Ple battery wire hle fr n expsed system wiring. Our manufacturer f slar electric pwer assemblies have prven themselves as the mst rugged and rbust design in thusands f installatins wrldwide since their intrductin in The systems surpass all cdes, cmpliances, and quality cntrls. SEPA300 Slar Pwer System Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 32

33 System Features: The SEPA300 slar electric pwer assembly features fur 75 Watt slar panels integrated tgether, full prtective panel pan, and single supprt pwer bracket. The 224 Amp hurs battery assembly, cnsisting f tw 112 amp hur batteries, is cntained within a vented aluminum battery bx and includes a wiring harness and cntrl electrnics. There are 14 different cntrllers t chse fr different types f applicatins such as dusk t dawn dusk activated, mtin detectr, etc. The systems are built fr easy installatins with quick cnnect terminals and can be munted t a wall, rf, r ple. Every system is available t prduce DC r AC pwer depending n the needs f the device. Meets AASHTO 150 mph wind frce ratings. Pwder cating and custm design available. 5 year maintenance free and system warranty. Panel Assembly A 300 Watt single array cnsists f fur 75 Watt mdules which are integrally munted upn and pwer riveted t a vented aluminum panel pan featuring full panel backside damage preventin, welded substantial aluminum munting rails, pwer riveted aluminum end rails and terminated in pre-wired 3 prng Mlex type cnnectr. Slar array prduces 17.6 amps charge current and measures 48 L x 83.2 W x 2.1 D. The array has a 10 year warranty fr 10% pwer lss and 25 year warranty fr 20% pwer lss. Slar array has a life cycle testing and actual field prven life f ver 30 years. Battery Assembly A vented aluminum bx cntaining tw 112 amp hur sealed GEL batteries, ttaling 224 amp hurs, which is integrally munted and pre-wired t include a standard wire harness with simple plug in cnnectins fr the LCU1 Lighting Cmputer/Cntrl Unit and the slar panel assembly. The lw prfile design cntains a prefrmed and welded back munting plate fr easy slide n attachment t the pwer bracket. Battery assembly is unique Thrugh the Ple rear wire ruting utput fr n expsed wiring t prvide a neat clean appearance fr the finished installatin. Battery assembly is cmplete with all stainless steel munting hardware. All metal crafting has been perfrmed by high speed rbtic presses using cmputer prgrammed instructins. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 33

34 Pwer Bracket An all aluminum, unique duble supprt 5/15/45 degree pwer bracket cnsists f a substantial aluminum channel affrding munting t any ple r wall. Circumference welding f strng schedule aluminum pipe in a duble supprt arrangement t prvide maximum strength fr wind lading. The pwer bracket cntains predrilled and tapped battery slide munt blts f stainless steel and tw 11/16 munting hles fr utility standard 5/8 munting blts. The bracket cntains the unique Thrugh the Ple battery wire hle fr n expsed system wiring. Our manufacturer f slar electric pwer assemblies have prven themselves as the mst rugged and rbust design in thusands f installatins wrldwide since their intrductin in These systems surpass all cdes, cmpliances, and quality cntrls. SEPA340 Slar Pwer System System Features: The SEPA340 slar electric pwer assembly features fur 85 Watt slar panels integrated tgether, full prtective panel pan, and single supprt pwer bracket. The 224 Amp hurs battery assembly, cnsisting f tw 112 amp hur batteries, is cntained within a vented aluminum battery bx and includes a wiring harness and cntrl electrnics. There are 14 different cntrllers t chse fr different types f applicatins such as dusk t dawn dusk activated, mtin detectr, etc. The systems are built fr easy installatins with quick cnnect terminals and can be munted t a wall, rf, r ple. Every system is available t prduce DC r AC pwer depending n the needs f the device. Meets AASHTO 150 mph wind frce ratings. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 34

35 Pwder cating and custm design available. 5 year maintenance free and system warranty. Panel Assembly A 340 Watt single array cnsists f fur 85 Watt mdules which are integrally munted upn and pwer riveted t a vented aluminum panel pan featuring full panel backside damage preventin, welded substantial aluminum munting rails, pwer riveted aluminum end rails and terminated in pre-wired 3 prng Mlex type cnnectr. Slar array prduces 19.4 amps charge current and measures 48 L x 83 W x 2.1 D. The array has a 10 year warranty fr 10% pwer lss and 25 year warranty fr 20% pwer lss. Slar array has a life cycle testing and actual field prven life f ver 30 years. Battery Assembly A vented aluminum bx cntaining tw 112 amp hur sealed GEL batteries, ttaling 224 amp hurs, which is integrally munted and pre-wired t include a standard wire harness with simple plug in cnnectins fr the LCU1 Lighting Cmputer/Cntrl Unit and the slar panel assembly. The lw prfile design cntains a prefrmed and welded back munting plate fr easy slide n attachment t the pwer bracket. Battery assembly is unique Thrugh the Ple rear wire ruting utput fr n expsed wiring t prvide a neat clean appearance fr the finished installatin. Battery assembly is cmplete with all stainless steel munting hardware. All metal crafting has been perfrmed by high speed rbtic presses using cmputer prgrammed instructins. Pwer Bracket An all aluminum, unique duble supprt 5/15/45 degree pwer bracket cnsists f a substantial aluminum channel affrding munting t any ple r wall. Circumference welding f strng schedule aluminum pipe in a duble supprt arrangement t prvide maximum strength fr wind lading. The pwer bracket cntains predrilled and tapped battery slide munt blts f stainless steel and tw 11/16 munting hles fr utility standard 5/8 munting blts. The bracket cntains the unique Thrugh the Ple battery wire hle fr n expsed system wiring. Our manufacturer f slar electric pwer assemblies have prven themselves as the mst rugged and rbust design in thusands f installatins wrldwide since their intrductin in These systems surpass all cdes, cmpliances, and quality cntrls. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 35

36 Extra Large Slar Pwer System Figure 4 :SEPA425 The extra large slar pwer systems prvide pwer fr applicatins that require higher intensity, multiple slar lights, r prjects that allw fr large pwer needs. They are cmprised f three t fur slar panels, a quad stack slar battery assembly, cntrl electrnics, and duble system munting bracket. SEPA425 Slar Pwer System Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 36

37 System Features: The SEPA425 slar electric pwer assembly features five 85 Watt slar panels integrated tgether, full prtective panel pan, and single supprt pwer bracket. The 448 Amp hurs battery assembly, cnsisting f fur 112 amp hur batteries, is cntained within tw vented aluminum battery bxes and includes a wiring harness and cntrl electrnics. There are 14 different cntrllers t chse fr different types f applicatins such as dusk t dawn dusk activated, mtin detectr, etc. The systems are built fr easy installatins with quick cnnect terminals and can be munted t a wall, rf, r ple. Every system is available t prduce DC r AC pwer depending n the needs f the device. Meets AASHTO 150 mph wind frce ratings. Pwder cating and custm design available. 5 year maintenance free and system warranty. Panel Assembly A 425 Watt single array cnsists f five 85 Watt mdules which are integrally munted upn and pwer riveted t a vented aluminum panel pan featuring full panel backside damage preventin, welded substantial aluminum munting rails, pwer riveted aluminum end rails and terminated in pre-wired 3 prng Mlex type cnnectr. Slar array prduces amps charge current and measures 104 L x 48 W x 2.1 D. The array has a 10 year warranty fr 10% pwer lss and 25 year warranty fr 20% pwer lss. Slar array has a life cycle testing and actual field prven life f ver 30 years. Battery Assembly A duble vented aluminum bx cntaining fur 112 amp hur sealed GEL batteries, ttaling 448 amp hurs, which is integrally munted and pre-wired t include a standard wire harness with simple plug in cnnectins fr the LCU1 Lighting Cmputer/Cntrl Unit and the slar panel assembly. The lw prfile design cntains a prefrmed and welded back munting plate fr easy slide n attachment t the pwer bracket. Battery assembly is unique Thrugh the Ple rear wire ruting utput fr n expsed wiring t prvide a neat clean appearance fr the finished installatin. Battery assembly is cmplete with all stainless steel munting hardware. All metal crafting has been perfrmed by high speed rbtic presses using cmputer prgrammed instructins. Flrida / CIF Prt f Destinatin. Fr enquiries please call r us fr pricing. Page 37