MAIN INDEX NOZZLES.A RODDER HOSE AND ACCESSORIES... B DEBRIS HOSE & PIPE.. C WATER SYSTEM...D ENGINES. E TRANSMISSIONS.. F ELECTRICAL. G GAUGES..

Transcription

1 MAIN INDEX NOZZLES.A RODDER HOSE AND ACCESSORIES... B DEBRIS HOSE & PIPE.. C WATER SYSTEM...D ENGINES. E TRANSMISSIONS.. F ELECTRICAL. G GAUGES.. H VALVES... I BODY PARTS..J STORAGE TOOL & ACCESSORIES..K

2

3 CONTENTS NOZZLES General Nozzles Explanation... A-1 Blue Thunder Nozzles & Components.. A-2 Blue Twister...A-3 Mini Blue Thunder.A-3 Blue Penetrator.. A-3 Blue Spinner.. A-3 Blue Grenade. A-3 Blue Blaster A-3 JPX Nozzle and Components... A-4 Penetrator Nozzle...A-5 Sand Nozzle... A-5 Sanitary Nozzle..A-5 General Purpose Nozzle.A-5 #10 Storm Nozzle.. A-6 6" Nozzle A-6 8" Nozzle A-6 Culvert Nozzle... A-6 Tungsten Carbide Replaceable Inserts...A-7 Miscellaneous Nozzle A-8 3/4"Nozzles PSI...A-9 Nozzle Support Guards..A-10 3/4" Diameter.A-10 1" Diameter.A /4" Diameter..A-10

4 NOZZLES A-1 NOZZLES GENERAL 15 Provides 50% more forward thrust than 30 nozzles. This is better for high grade, long lines and when penetrating blockages. 30 Provides thrust and radial impact force against the wall of the pipe to loosen debris. This nozzle does a better job of cleaning than the 15, due to the jets of water hitting the wall more directly and closer to the nozzle. VACTOR BLUE HIGH PERFORMANCE NOZZLES BLUE THUNDER Made entirely in the USA, Blue Thunder is a 6 orifice, 10 degree nozzle with improved thrust and flow characteristics when compared to competitive nozzles. Blue Thunder is available in 40, 60, and 80 gallon per minute models, all with an optional penetrator orifice (83107C,D,E,F,G' & H). It s specially contoured internal geometry ensures minimum turbulence, maximum efficiently and up to a 30% increase in pulling power. Also available - Mini Blue Thunder, in 40 and 60 GPM models for 3/4" applications (83107 S & T) Blue Blaster An excellent, dual angle, sand and sludge nozzle. The Blue Blaster's alloy steel construction offers much longer service life than other materials. Combined with the replaceable carbide inserts, this guarantees a nozzle that will offer optimal performance for years to come. Rated at 60 GPM (48226) and 80 GPM (48226A) at 2,000 PSI, the Blue Blaster features ten rear facing jets with dual angles for maximum performance and power. Replaceable #C13 Carbide inserts with flow straighteners. Blue Twister A revolutionary rotary nozzle for use in lines up to 36" in diameter, the Blue Twister will cut grease, roots, sand, silt, and debris from sewer lines with amazing ease. Powerful rear jets will pull 500' of Shark hose under the most serve conditions, while rotational speed control provides excellent jet quality and a helical cleaning path so the entire surface of the line is scoured clean. An off center front boring jet cuts grease, roots, and other debris, leaving it ready to be flushed out of the line as the Blue Twister passes through. Available in 60 GPM and 80 GPM versions, with interchangeable tips for maximum versatility. Important features: Rotation Speed Control- A viscous fluid governor built into the tools slows rotation rate for excellent jet quality, and hitting power. No-Leak Seal-Unlike competitor's leaky seal designs, the Blue Twister seal delivers all the pumped water to the jets. High-Efficiency Carbide Nozzles- The carbide nozzles are a high efficiency design which produces a powerful, cohesive jet. Blue Spinner The perfect nozzle to eliminate residue from a sewer line, improving the use of TV, video and relining equipment. The Blue Spinner design incorporates a patented drive system and brake jets to limit rotational speed and apply full hydraulic pressure to the cleaning task. Made in the USA with the precision and quality needed for high performance in the sewer line. Heat treated stainless steel, polished and ground, for maximum service life. Hardened stainless steel, replaceable inserts for optimal rotational speed and cleaning power. Minimum maintenance required. Available in 1" 60 GPM (48223) or 80 GPM (48223A) at 2,000 PSI. Blue Grenade The Blue Grenade is a 1" grenade style Penetrator nozzle, rated at 60 GPM (48224) or 80 GPM (48224A) at 2,000 PSI. Made heavy for mainline work, the Blue Grenade will stay in the pipe bottom, while five 12 rear facing jets easily pull the hose and flush debris.

5 Blue Penetrator An excellent heavy duty cleaning nozzles that will stay in the bottom of the pipe, the Blue Penetrator provides superior flushing action. Rated at 60 GPM (48225) or 80 GPM (48225A) at 2,000 PSI, the Blue Penetrator features a heat treated steel body with five, replaceable, rear facing jets. VACTOR HIGH PERFORMANCE NOZZLES Sanitary Nozzles 6 rearward jets come in 15 and Standard cleaning 4"-12" lines good for loosening debris in larger lines and running long lines Standard cleaning 4"-18" lines good for cleaning grease and other debris. PENETRATOR NOZZLE 6 rearward jets, 1 forward jet comes in 15 and Good for cleaning and unblocking plugged lines with sand and dirt which mainly lays on bottom of the pipe. Comes in various GMP ratings. Good in 4"-12" pipe Good in cleaning and unblocking plugged lines with grease and other accumulations on the walls of pipe. Comes in various GPM ratings. Good in 4"- 18" pipe. SAND NOZZLE 6 rearward jets, 2 forward jets, comes in 15 and 30 Forward jets are at an outward angle not to cross. Forward jets wash down sand build-ups to allow nozzle to cross and have rear jets clean or move sand Same as 60308, except more water flow. Good in 4"-12" lines Same as 58927, except more water flow. Good in 4"-18" lines. 3" GENERAL PURPOSE NOZZLE Larger and heavier nozzle for 10" and larger lines. Larger body places nozzles closer to walls for greater cleaning. Screw in replaceable tungsten nozzle. # 10 NOZZLE #10 8 replaceable rearward fan jets. Comes in tungsten or non-tungsten carbide replaceable nozzles. Good for storm and sanitary lines 10" and up. Fan pattern improves coverage on walls. Forms a water cone to trap materials and prevent by passing. Good for grease and detergent build ups, especially after use of STD sanitary nozzle which will cut grooves in build up. This nozzle must be used with a skid or guard for best results. CULVERT NOZZLE " 8 replaceable tungsten carbide jets on the bottom. Must be used with skid and swivel for best results. Good for cleaning 15"-48" lines with debris on the bottom. Jets can be sized for any GPM flow.

6 " Replaceable tungsten carbide jets on the bottom. Must be used with skid and swivel for best results. Works better with GPM systems due to weight of nozzle. Good for 15"-60" lines with debris on bottom Flat nozzle for box culverts with debris on bottom. 8 replaceable jets. NOZZLE GUIDES 1. Nozzle guides are used to prevent reversal of nozzle in a line, or to prevent the nozzle from turning into another line. Length of guide and nozzle combined should be greater than the diameter of the line being worked. 2. Helps center the nozzle in the pipe for more complete cleaning. 3. Helps reduce nozzle body wear and leader hose wear. 4. Prevents nozzle from turning into laterals if size is correct for pipe diameter.

7 NOZZLES A-2 BLUE THUNDER NOZZLES AND COMPONENTS Blue Thunder Blue Thunder Penetrator 83107C 40 GPM 83107D 40 GPM 83107E 60 GPM 83407F 60 GPM 83107G 80 GPM 83107H 80 GPM Replacement Sled Assembly 82878A Sled without penetrator 82878B Sled with penetrator Replacement Orifices Part Number Orifice Test Gauge 40 GPM w/penetrator (use 7) 85862A 48026A 40 GPM w/o penetrator (use 6) 85862B GPM w/penetrator (use 7) 85862D 48026C 60 GPM w/o penetrator (use 6) 85862E 48026B 80 GPM w/penetrator (use 7) 85862F 48026E 80 GPM w/o penetrator (use 6) 85862G 48026D Made entirely in the USA, Blue Thunder is a 6 orifice, 10 degree nozzle with improved thrust and flow characteristics when compared to competitive nozzles. Through its specially contoured internal geometry which ensures minimum turbulence, maximum efficiency and up to a 30% increase in pulling power.

8 NOZZLES A-3 VACTOR BLUE NOZZLES BLUE TWISTER MINI BLUE THUNDER GPM 83107S 40 GPM GPM 83107T 60 GPM BLUE PENETRATOR BLUE SPINNER GPM GPM 48225A 80 GPM 48223A 80 GPM BLUE GRENADE BLUE BLASTER GPM GPM 48224A 80 GPM 48226A 80 GPM

9 NOZZLES A-4 JPX NOZZLE AND COMPONENTS JPX NOZZLE ASSEMBLY 60 GPM CONSISTS OF: PART # QTY DESCRIPTION 16577A 1 PIPE PLUG 20211A 1 REDUCER BUSHING SLED ORIFICE ORIFICE JPX NOZZLE ASSEMBLY 80 GPM CONSISTS OF: PART # QTY DESCRIPTION 16577A 1 PIPE PLUG 20211A 1 REDUCER BUSHING ORIFICE ORIFICE SLED Vactor Shark Nozzles attack tough cleaning jobs with breakthrough power and efficiency. The unique patent-pending design converts water flow and pressure into thrust 22% more efficiently than ordinary nozzles. Add a Shark to your system and you ll get an instant boost in cleaning power, plus a dramatic increase in your crew s productivity. Put some teeth into your machine with Vactor Shark Nozzle, the most effective, high performance nozzle you can buy. Creates more thrust from the same water pump vs. ordinary nozzles Dramatically increases productivity Reduces number of runs Decreases water and fuel consumption Retains current flow and pressure ratings Adjustable flow allows even greater water conservation Convertible to forward-jet penetrator mode 100% stainless steel construction for long life and durability Available in 60 and 80 GPM models Genuine Vactor quality

10 NOZZLES A-5 PENETRATOR NOZZLE SAND NOZZLE SANITARY NOZZLE PENETRATOR SAND SANITARY PENETRATOR SAND SANITARY These nozzles have six reward jets These nozzles have six reward Both of these have six reward jets. and one forward. jets and two forward. These nozzles They are most useful when cleaning are used to clean large material lightly accumulated material. accumulations and blockages. SELECTING A PART # FOR THE TUNGSTEN CARBIDE ORIFICE NOZZLES To select the full part number for the tungsten carbide nozzles listed above, use the chart located below. Choose one letter from the three columns to form a three letter suffix. This suffix is then added to the five digit part number of the nozzles listed above to form the full part number. Example: If you want a 30 Sanitary nozzle and your Vactor has a 1 inch hose, 60 GPM flow rate, and operates at 2000 psi; then the nozzle to be selected would be BFB. HOSE DIA. FLOW PRESSURE A 1 ¼ A 35 G 65 A 1850 psi B 1 B 40 H 70 B 2000 psi C ¾ C 45 I 75 C psi D 50 J 80 E 55 K 90 F 60 L 100

11 NOZZLES A DIA GENERAL PURPOSE A #10 STORM ALUMINUM NOZZLE NOZZLE 60 GPM This nozzle has six rearward replaceable USES STAINLESS Inserts. INSERTS B #10 STORM TUNGSTEN CARBIDE NOZZLE 60 GPM USES T/C INSERTS A 6 NOZZLE-50 GPM USES T/C INSERTS C #10 STORM NON- TUNGSTEN CARBIDE NOZZLE-80/100 GPM USES 40797A A NON-T/C INSERTS B 6 NOZZLE-60 GPM USES T/C INSERTS C 6 NOZZLE-80 GPM USES T/C INSERTS D 6 NOZZLE-100 GPM USES T/C INSERTS A 8 NOZZLE-80 GPM USES T/C INSERTS B 8 NOZZLE-100 GPM USES T/C INSERTS C 8 NOZZLE-140 GPM USES T/C INSERTS A CULVERT NOZZLE-50 GPM USES T/C INSERTS D CULVERT NOZZLE-90 GPM USES T/C INSERTS B CULVERT NOZZLE-60 GPM USES T/C INSERTS C CULVERT NOZZLE-80 GPM USES T/C INSERTS

12 NOZZLES A-7 TUNGSTEN CARBIDE REPLACEABLE INSERTS INSERT 6 JETS 7 JETS 8 JETS (60)* CHART SPECIFICATIONS: 500 ft. x 1 in dia. Hose operating at 2000psi. For 400 ft. of hose use the insert above and for 600 ft. of hose use the insert below which was chosen in the chart. * psi.

13 NOZZLES A-8 15 PROBE 1 30 SANITARY 1 JETS: 5 Rearward GPM JETS: 6 Rearward Forward 29343A 60 GPM 44233A 29343B 50 GPM 44233B 29343C 80 GPM SAND 1 30 LATERAL ½ JETS: 6 Rearward 40585A 60 GPM JETS: 5 Rearward Forward 40585B 80 GPM USAGE: Lateral Cleaning for ½ line

14 NOZZLES A (3/4 ) ALL NOZZLES ARE PSI 30 STANDARD 15 STANDARD JETS: 6 Rearward 46896E JETS: 6 Rearward 18 SAND PENETRATOR 46896C JETS: 6 Rearward 46896B JETS: 6 Rearward 2 Forward 1 Forward 20 PROBE SAND/SLUDGE 46896D JETS: 5 Rearward 46896A JETS: 6 Rearward 1 Forward 1 Forward 46896F DUAL RADIAL JETS: 8 Rearward 1 Forward

15 NOZZLE SUPPORT/GUARDS A-10 To increase the safety for the operator, Vactor Manufacturing offers various lengths and diameters of their Nozzle Support/Guards. The Nozzle Support/Guard provides a positive method to prevent the nozzle from reversing its direction inside the item being cleaned. It also enables the nozzle to travel over rough or broken pipe and minimizes the possibility of the nozzle traveling up a lateral sewer line. The Nozzle Support/Guard should be installed between the hose and the nozzle and should be used at all times. A proper length for the extension is a length that is greater than the diameter of the item being cleaned. 3/4" Diameter 1" Diameter Narrow Wide Narrow Wide " " " " 67273B 16" 67274B 16" 31685B 16" 34955B 16" 67273C 20" 67274C 20" 31685C 20" 34955C 20" 67273D 24" 67274D 24" 31685D 24" 34955D 24" 67273E 30" 67274E 30" 31685E 30" 34955E 30" 67273F 36" 67274F 36" 31685F 36" 34955F 36" 67273G 48" 67274G 48" 31685G 48" 34955G 48" 67273H 60" 67274H 60" 31685H 60" 34955H 60" 1 1/4" Diameter Narrow Wide " 67488E 30" 67488B 16" 67488F 36" 67488C 20" 67488G 48" 67488D 24" 67488H 60"

16

17 CONTENTS RODDER HOSE & ACCESSORIES Vactor Rodder Hose- Plastic (3/4")... B-1 Vactor Rodder Hose- Plastic (1" & 1/4").. B-1 Vactor Shark Rodder Hose- Rubber 1". B-1 Thermal Plastic Hose Repair. B-2 Swage Machine..B-2 Mender Dies...B-2 Pusher Dies B-2 Die Kits.. B-2 Complete Kit......B-2 A. Splicer/Menders.... B-2 B. Male Ends......B-2 Shark Swage Kit... B-3 Mender Fitting... B-3 Male Fitting B-3 Flexible Hose Guide.. B-4 Leader Hose-3/4"... B-4 Leader Hose 1"... B-4 Leader Hose 1 1/4" B-4 Female Swivel... B-4 Adapter Union (45-80 GPM)....B-5 Adapter Union (100 GPM).... B-5 H.P. Nipple (45-80 GPM).. B-5 H.P. Nipple (100 GPM)..... B-5

18 RODDER HOSE & ACCESSORIES B-1 VACTOR RODDER HOSE - PLASTIC (3/4") 2500 PSI (Orange Cover) 3000 PSI (Blue Cover) ¾" x 400' ¾" x 500' 48150C ¾" x 800' 46916A ¾" x 400' 48150D ¾" x 600' 46916F ¾" x 600' 48150E ¾" x 500' 46916E ¾" x 800' VACTOR RODDER HOSE- PLASTIC (1" & 1 1/4 ") 2500 PSI (Orange Cover) 3000 PSI (Blue Cover) " x 400' " x 500' 43569E 1" x 800' 46113B 1" x 400' " x 500' 46113C 1" x 600' " x 600' 46113D 1" x 800' /4" x 500' 46113F 1" x 700' SPLICER/MENDERS (BLUE BAND) FOR PLASTIC HOSE /4"X 2500 PSI 45267A 3/4"X 3000 PSI " /4" VACTOR SHARK RODDER HOSE RUBBER 1" 3000 PSI (Black cover-blue stripe) " x 400' " x " x 600'

19 RODDER HOSE & ACCESSORIES B-2 THERMAL PLASTIC HOSE REPAIR SWAGE MACHINE YOKE 44317A A 1 ¼ TOOL COMPLETE Includes: SWAGE PLATE SWAGE SCREW (Long) FLAT WASHER SCREW (Short) NUT 44159B BEARING (NOT SHOWN)(2) 44159C HARD WASHER (NOT SHOWN)(4) A. MENDER DIES B. PUSHER DIES ¾" ¾" " " ¼" ¼" DIE KITS (Include 2 menders dies, 1 pusher) COMPLETE KIT (Machine and Dies) " " /4" 66286A 1 1/4" A. SPLICER/MENDERS B. MALE ENDS (BLUE BAND) (BLUE BAND) /4" PSI /4" PSI 45267A 3/4" PSI 45268A 3/4" PSI " PSI " PSI /4" PSI /4" PSI

20 SHARK MENDER B D SHARK SWAGER KIT CONSISTS OF: PART# QTY DESCRIPTION 47748DF 2 SHARK BASE 47748DD 2 SHARK ROD 47748DA 2 SHARK BEARING 47748DC 4 SHARK NUT 47748DE 2 5/8 x 4 BOLT 47748DB 1 YOKE 47748H 2 DIE SETS 47748J 2 DIE SETS 47748K 2 DIE SETS 47748G 1 PUSHER 4 SHARK WASHER 1 SHARK LUBRICANT 1 O.D. TAPE 2 INSTRUCTION BOOK *47748E MENDER FITTING (NOT INCLUDED IN KIT) *47748F MALE FITTING (NOT INCLUDED IN KIT) * FOR USE WITH MANUAL SWAGE KIT ONLY

21 RODDER HOSE & ACCESSORIES B " FLEXIBLE HOSE GUIDE Includes: HOSE 36" SNAP HOOK SWIVEL NYLON ROPE 25' 52846A 78 FLEXIBLE HOSE GUIDE Includes: 46373A Hose - 78" Snap Hook Swivel Nylon Rope - 25' LEADER HOSE - ¾" LEADER HOSE - 1" " " 47650B 5' 31106A 48" 31096A 60" (5') 47650C 10' 31106FF 130" 31096B 120" (10') 47650D 15' 31106R 175" 31096C 180" (15') 47650E 25' 31096D 25' 47650H 50' 31096E 30' 47650F 25' 31096F 35' 47650G 30 LEADER HOSE - 1 ¼ " 44314A 60" 44314B 120" 44314C 180" ADAPTER " ¼ 40067B 3/4"

22 RODDER HOSE & ACCESSORIES B Female Swivel (45-80 GPM) 1" Female Swivel (100 GPM) 1 ¼" 40067B Female Swivel ¾ Hyd. Adapter 16npt x 16npt Str. (45-80 GPM) Hyd. Adapter 20npt x 20npt Str. (100 GPM) 1 ¼

23 CONTENTS DEBRIS HOSE & PIPE Aluminum Pipe with Flanged Ends 4".. C-1 Aluminum Pipe with Flanged Ends 6".. C-1 Aluminum Pipe with Flanged Ends 8".. C-1 Aluminum Pipe with Flanged Ends... C-1 Fiberglass Pipe with Flanged Ends....C-1 Aluminum CB Nozzle with Flanged End 4". C-2 Aluminum CB Nozzle with Flanged End 6". C-2 Fiberglass CB Nozzle with Flanged End 6".. C-2 Aluminum CB Nozzle with Flanged End 8". C-2 Fiberglass CB Nozzle with Flanged End 8".. C-2 PVC Flex CB Nozzle. C-2 PVC Flex Pipe with Bandlock Ends 4"..... C-3 PVC Flex Pipe with Flanged Ends 4"....C-3 PVC Pipe Flex with Band-Lok Ends 6".....C-3 PVC Flex Pipe with Flanged Ends 6"....C-3 PVC Flex Pipe with Band-Lok Ends 8" C-3 PVC Flex Pipe with Flanged Ends 8" C-3 PVC Flex CB Nozzle.C-3 PVC Flex Hose 2". C-4 PVC Flex Hose 2 ½.. C-4 PVC Flex Hose 3"..C-4 PVC Flex Hose 4"..C-4 PVC Flex Hose 6"..C-4 PVC Flex Hose 8"..C-4 PVC Flex Hose 12" C-4 Rubber Hose with Band-Lok Ends 4" C-5 Rubber Hose 4"..C-5 Rubber Hose with Band-Lok Ends 6"... C-5

24 Rubber Hose 6"..C-5 Rubber Hose with Band-Lok Ends 8" C-5 Rubber Hose 8"..C-5 Rubber Hose 10" C-5 Rubber Hose 12"....C-5 Water Hose 1 1/2"..C-6 Water Hose 2 "...C-6 Water Hose 2 1/2"..C-6 Water Hose 3" C-6 Water Hose 4".... C-6 Royal Flex Hose.C-6 Blue Nylon Hose....C-6 Roller Flanges C-7 Roller Flange Assemblies.. C-7 Band-Lok Coupler Assemblies..C-7 Band-Lok Female Couplers... C-7 Band-Lok Male Couplers...C-7 Quick Change Clamps... C-8 Band-Lok Clamps.. C-8 Double Bolt Clamps...C-8 Power Clamps C-8 Toggle Clamps...C-8 Adapters. C-9 Snorkel Nozzle kit.. C-10 Adapters and Connectors.. C-11 - C-14 Multiple Direction Adapters C-15- C-16 Bag Filtration System Plumbing.C-17 Bag Filtration System.... C-18 - C-19 Bags C-20 Cages and air cannon components..c-21 - C-23

25 DEBRIS HOSE & PIPE C-1 PIPES ALUMINUM PIPE WITH ALUMINUM PIPE WITH FLANGED ENDS 4 FLANGED ENDS x A 4 x B 4 x D 4 x E 4 x 120 Our aluminum pipes and catch basin nozzles are designed to be light for easy handling, corrosion resistant for long life, and strong enough to handle your toughest jobs. Fiberglass is available as a nonconductive alternative * 8 x A 8 x B 8 x C * 8 x D 8 x 72 ALUMINUM PIPE WITH 25637E 8 x 84 FLANGED ENDS 25637F 8 x A 10 x 36 ALUMINUM PIPE WITH 25637G 8 x B 10 x 60 FLANGED ENDS J 8 x C 10 x x K 8 x D 10 x A 6 x L 8 x 180 FIBERGLASS PIPE 34763B 6 x 90 WITH FLANGED ENDS 25637M 8 x C 6 x x N 8 x D 6 x A 6 x P 8 x E 6 x B 6 x Q 8 x F 6 x x R 8 x G 6 x x H 6 x 108 * Standard pipe package on a new 52294A 8 x 72" 2100 unit

26 DEBRIS HOSE & PIPE C-2 PIPES ALUMINUM CB NOZZLE ALUMINUM CB NOZZLE FIBERGLASS CB NOZZLE WITH FLANGED END 4 WITH FLANGED END 8 WITH FLANGED END x x x B 4 x A 8 x 30" 68643A 6 x C 4 x 78" 25268B 8 x B 6 x D 4 x C 8 x C 6 x A 4 x 78" 25268D 8 x E 8" x F 8 x 42 ALUMINUM CB NOZZLE FIBERGLASS CB NOZZLE WITH FLANGED END 6" 25268G 8" x 36 WITH FLANGED END x H 8" x x A 6 x J 8 x A 8 x B 6" x K 8 x B 8 x 93 ½ 34766C 6 x C 8" x D 8 x 72" 55928E 8 x 96 ALUMINUM CB NOZZLE PVC FLEX CB NOZZLE WITH FLANGED END 8" x M 6 x A 10 x " x J 8 x B 10 x 36

27 DEBRIS HOSE & PIPE C-3 HOSE PVC FLEX HOSE WITH PVC FLEX HOSE WITH PVC FLEX HOSE WITH BANDLOCK ENDS 4 BANDLOCK ENDS 8 FLANGED ENDS x 100" x 5' x x 25' x 10' x 50' x 20' PVC FLEX HOSE WITH PVC FLEX HOSE WITH BANDLOCK ENDS 6 PVC FLEX CB NOZZLE FLANGED ENDS x 60 (5') 25268M 6 x x 12' x 120" (10') 25268J 8 x A 6 x 15' x 300" (25') x 600 (50') PVC FLEX PIPE WITH FLANGED ENDS 8 TUFF GUZZ Rugged, flexible, smooth bore rubber vacuum hose with helix coil (end included). Rated to 27 Hg., vacuum. Temperature range F. 4" x 20' " x 10' " x 10' x x x 127"

28 DEBRIS HOSE & PIPE C-4 HOSE PVC FLEX HOSE 2 PVC FLEX HOSE 4 PVC FLEX HOSE x Bulk x 25' (300") x Bulk x Bulk x 50' (600") (Black Royal Flex) "x Bulk x Bulk x 62 (Clear) x 66" PVC FLEX HOSE 2.5 PVC FLEX HOSE x x x x x Bulk x x 10' (120") x x 20' x 40' PVC FLEX HOSE 3 PVC FLEX HOSE 10 PVC FLEX HOSE " x Bulk x Bulk x Bulk GREEN MONSTER Heavy duty, abrasion resistant, smooth bore, 3/8 gum rubber lined vacuum hose with helix coil (ends included). Rated to 28 Hg., vacuum. Temperature range: F. 4" x 20' " x 10' " x 10'

29 DEBRIS HOSE & PIPE C-5 HOSE RUBBER HOSE WITH BAND LOK ENDS 4 RUBBER HOSE 4 RUBBER HOSE x 300 (25') x 240 (20') x x 300 (25') x 10" RUBBER HOSE WITH BAND LOK ENDS A 10 x x 60 (5') RUBBER HOSE D 10 x x 120 (10') x 120 (10') 47394L 10" x 48 RUBBER HOSE WITH 47392A 6 x 96 (8') BAND LOK ENDS x Q 10 x x 60 (5') RUBBER HOSE 8 RUBBER HOSE x 120 (10') x 48" (4') x 10" RUBBER HOSE WITH FLANGED ENDS x A 12 x A 8 x A 8 x B 12 x 8 (Double wall thickness) x C 12 x x x D 12 x x 120 (10') x 127

30 DEBRIS HOSE & PIPE C-6 BLUE NYLON HOSE HYDRANT HOSE KANAFLEX HOSE BLUE NYLON HOSE WATER HOSE 2 1/2" x Bulk ½ x Bulk x Bulk 20720A 2 ½ x A 4 x 10' 20720D 2 ½ x B 4 x 15' 29899C 4 x 25' x Bulk ROYAL FLEX HOSE WATER HOSE J 4 x Bulk WATER HOSE 1 ½ 20720L 1 ½ x 50" 29898A 6 x 5' 45824F 3 x Bulk 29898B 6 x 8' 45824I 4 x Bulk 29898C 6 x 10' 29898H 6 x 50' PUMA HOSE 3" x Bulk " x Bulk 47242A 8 x 10' 45824A 3" x 9.5 FT B 8 x 15' 45824B 3" x 24" 47242C 8 x 25' 45824C 3" x 18" 45824D 3" x 12" 45824E 3" x 30"

31 DEBRIS HOSE & PIPE C-7 HOSE ENDS ROLLED FLANGE ROLLED FLANGES ASSEMBLIES /8 PLAIN PUNCHED FLANGED ASS Y PLAIN A 8 1/8 PUNCHED FLANGED SLOTTED B 8 1/8 PLAIN ASS Y A 6 ALUMINUM PUNCHED FLANGED ASS Y /8 PUNCHED B 10 PLAIN ALUMINUM FLANGED B 6 1/8 SLOTTED ASS Y B 10 1/8 PLAIN C 6 1/8 PLAIN PUNCHED PLAIN A 8 PLAIN ALUMINUM BAND-LOK COUPLER BAND-LOK FEMALE BAND-LOK MALE ASSEMBLIES COUPLERS COUPLERS COUPLER ASS Y FEMALE COUPLER MALE COUPLER COUPLER ASS Y FEMALE COUPLER MALE COUPLER COUPLER ASS Y FEMALE COUPLER MALE COUPLER COUPLER ASS Y FEMALE COUPLER MALE COUPLER See Gaskets Section FEMALE COUPLER MALE COUPLER For Band-Lok Gaskets

32 DEBRIS HOSE & PIPE C-8 HOSE CLAMPS QUICK CHANGE CLAMPS BAND-LOK CLAMPS A 4 QUICK CLAMP CLAMP QUICK CLAMP CLAMP QUICK CLAMP CLAMP 32087A BOLT CLAMP QUICK CLAMP 16584A BOLT QUICK CLAMP 32087A BOLT CLAMP DOUBLE BOLT CLAMPS POWER CLAMPS BAND CLAMPS KING CLAMP POWER CLAMP ½ CLAMP KING CLAMP ½ POWER CLAMP CLAMP KING CLAMP POWER CLAMP ½ CLAMP KING CLAMP POWER CLAMP ½ CLAMP KING CLAMP POWER CLAMP /2 CLAMP KING CLAMP POWER CLAMP TOGGLE CLAMP POWER CLAMP POWER CLAMP

33 DEBRIS HOSE & PIPE C-9 ADAPTERS 69861A 8 TO 4 REDUCER 69861B 8 TO 4 REDUCER FLANGED TO 4 HOSE END TO 4 REDUCER FLANGED TO 6 FLANGE TO DOUBLE 4 FLANGED TO DOUBLE REDUCER 4 TO DOUBLE REDUCER 8 FLANGE TO THREE SLEEVE TO THREE REDUCER 6 TO DOUBLE TO 6 STR

34 DEBRIS HOSE & PIPE C-10 SNORKEL NOZZLE KIT Complete Kit Part # A " Quick Clamp B ' Adapter Assembly C ' Pipe Extension D ' Nozzle Suction Pipe E ' Nozzle Suction Pipe F ' Nozzle Suction Pipe The Snorkel Nozzle is used to remove debris, which is completely submerged in water. It will pick up sand, silt and other debris from the bottom of a stream of water without picking up all the water. This allows the operator to collect a larger amount of debris while reducing the frequency of draining the debris tank when a large volume of water is present. The Snorkel Nozzle expands the applications of the Vactor by performing the same type of work as a conventional vacuum tanker. Operations of the Snorkel Use the shortest pipe and/or nozzle that will reach the material. This will provide the most efficient operation. In order to reach material; which is two feet below water, use the one foot pipe extension and the one foot nozzle. If the material is four feet below water use the one foot extension with the three foot nozzle. The five foot nozzle is not recommended for use with single stage machines.

35 SUCTION HOSE, PIPING & ACCESSORIES C-11 ADAPTERS AND CONNECTORS 8" FLANGED TO 6" MALE BAND-LOK ADAPTER PART NO PART NO COUPLER ASS'Y. 8" MALE TO 8 MALE BAND-LOK COUPLERS BOOM ANCHOR COUPLER PART NO PART NO "Y" CONNECTOR ASS'Y. 8" MALE TO (2) 4" FEMALE BAND-LOK COUPLERS

36 SUCTION HOSE, PIPING & ACCESSORIES C-12 ADAPTORS AND CONNECTORS PART NO " FLANGED TO 6" FEMALE BAND-LOK PART NO FLANGED TO 8" FEMALE BAND-LOK ADAPTER PART NO COUPLER ASS'Y. 8" FEMALE TO 8" FEMALE BAND-LOK COUPLER PART NO " MALE 6" FEMALE BAND-LOK REDUCER

37 SUCTION HOSE, PIPING & ACCESSORIES C-13 ADAPTORS AND CONNECTORS PART NO "Y" CONNECTOR ASS'Y 6" MALE TO (2) 4" FEMALE BAND-LOK COUPLERS PART NO " x 2 1/2" "Y" CONNECTORS PART NO " NOZZLE PART NO " MALE TO 4" FEMALE ADAPTER PART NO "Y" CONNECTOR ASS'Y. 8" MALE TO (2) 6" FEMALE BAND-LOK COUPLERS

38 SUCTION HOSE, PIPING & ACCESSORIES C-14 ADAPTORS AND CONNECTORS MALE COUPLER COVER PART NO A HOSE END ASSEMBLIES PART DESCRIPTION NO " FLANGED ASS'Y " ASS'Y. FLANGED " ASS'Y. FLANGED " ASS'Y. FLANGED TWO, THREE AND FOUR-WAY ADAPTERS PART NO " TO DOUBLE 2" REDUCER PART NO " TO TRIPLE 4" REDUCER FLANGED

39 SUCTION HOSE, PIPING & ACCESSORIE C-15 TWO, THREE AND FOUR-WAY ADAPTERS PART NO " TO DOUBLE 4" REDUCER FLANGED PART NO " TRIPLE 3" REDUCER FLANGE FLANGED PART NO " TO DOUBLE 4" REDUCER FLANGED PART NO " TO DOUBLE 4" REDUCER

40 SUCTION HOSE, PIPING & ACCESSORIES C-16 TWO, THREE AND FOUR-WAY ADAPTERS PART NO " TO FOUR 4" REDUCER - FLANGED PART NO FLANGED 8" TO DOUBLE 6" REDUCER FLANGED OTHER ADAPTERS NOT SHOWN " DIA. FLANGE TO DBL. 6" SLEEVE ADJUSTABLE AIR ADAPTER PART NO EIGHT INCH ADAPTER PART NO A SIX INCH ADPTER Both of these air adapters are designed to be used by PD (blower) machines.

41 SUCTION HOSE, PIPING AND ACCESSORIES C-17 BAG FILTRATION SYSTEM-PLUMBING DRESSER COUPLING 3/4" PART NO DRESSER COUPLING 3/4" x 90 PART NO DRESSER COUPLING 3/4" PART NO NOTE: GASKETS AND RETAINERS FOR ALL OF THE ABOVE COUPLINGS GASKETS: PART NO RETAINER: PART NO

42 SUCTION HOSE, PIPING AND ACCESSORIES C-18 BAG FILTRATION SYSTEM DRESSER COUPLING GASKET RETAINER CUP PART NO DRESSER COUPLING GASKET PART NO NOTE: TO BE USED IN CONJUNCTION WITH RETAINER NO ABOVE AND WITH DRESSER COUPLINGS SHOWN ON PAGE C-11

43 BAG FILTRATION SYSTEM-PLUMBING C-19 PART NO. BLOW PIPE - LEFT BLOW PIPE - RIGHT VENTURI NOZZLE ASS'Y. PART NO CARTRIDGE FILTERS CARTRIDGE FILTER WITH CAGE " STABILZER PIPE (NOT SHOWN)

44 BAGS AND CAGES C-20 GUZZLER DACRON 16 OUNCE SNAP RING FILTER BAG WITH DOUBLE BEADED CUFF. 5 MICRON 42" " " " " NOTE: DACRON BAGS TO FIT OTHER VACUUM SYSTEMS ALSO AVAIBLE. CALL FOR SPECIAL SIZES DACRON WITH STATIC GUARD WIRE: 42" " POLYETHYLENE: 50" POLYPROPYLENE FELT: 60" " (SS-2 ND STAGE) 60" (W/ INNER STOCK) 68" (1 ST STAGE DRY) 68" (2 ND STAGE WET) POLYPROPYLENE: 42" " " ACRYLIC COATED POLYESTER 24QAT: 42" " " NOMEX: 42" " " DACRON - 1 MICRON FILTER BAGS: 60" NOTE: NOMEX BAGS TO FIT OTHER VACCUM SYSTEM ALSO AVAILABLE. CALL FOR SIZES. 70" WET BAGS 42" TEFLON COATED POLYSTER 60" VACTOR FILTER BAG APPLICATION CHART BAG TYPE MAX. TEMPERATURE PART NO. POLY SNAP-IN 200 DEGREES F POLY (BOLT-IN) 200 DEGREES F NOMEX (BOLT-IN) 425 DEGREES F NOMEX (SNAP-IN) 425 DEGREES F GORTEX (BOLT-IN) 190 DEGREES F GORTEX (SNAP-IN) 190 DEGREES F 44685

45 BAGS AND CAGES C-21 CAGES Filter Bag Frames: STEEL ¾ GALVANIZED STEEL EPOXY COATED STAINLESS STEEL STAINLESS STEEL HEAVY DUTY BAG RETAINER - WIRE CAGE 50 3/ A 42511B BAG RETAINER S.S. BAG RETAINER- EPOXY COATED

46 AIR CANNONS AND COMPONENTS C-22 NOTE: Dashes are no longer necessary in Guzzler part numbers. These were left in because this is how they are currently shown in the Guzzler parts manual.

47 AIR CANNON COMPONENTS C-23 AIR CANNON COMPONENTS E A B C D A - PART NO AIR CANNON SOLENOID VALVE B - PART NO SKINNER VALVE C - PART NO TIMER RELAY D - PART NO TRANSDUCER E - PART NO E INTERNAL HOSE ASSY

48

49 CONTENTS WATER SYSTEM Hydrant Hose. D-1 Hydrant Hose Assembly... D-1 Assemblies and Installations. D-2 Rodder Pump Parts D-3 - D-10 Flexmaster Elbow.. D-11 Flexmaster Straight D-11 Flexmaster Tee...D-11 Flexmaster Clamps.D-11 Flexmaster Gaskets D-11 PVC Adapters D-12 PVC Barb...D-12 PVC Coupling D-12 PVC Elbows.. D-12 PVC Plugs. D-12 PVC Tee.D-12 Rubber Joints. D-13 Swivel Joints - Elbows...D-13 Swivel Joints - Straight.. D-13 Water Pump... D-14 Pump - Flusher...D-14 Trash Pump 3" HPT...D-14 Lateral Cleaning Kit...D-15 2" Expansion Plug. D-15 8" Water Ring D-15 High Pressure Water Pump D-15

50 3/4" Y-Strainer...D /4" y-strainer D-16 2" Y-Strainer.. D-16 3" Y-Strainer.. D-16 Real Craft...D-17 Water Pump DP80. D-18 Water Pump DP65. D-19

51 WATER SYSTEM D-1 HYDRANT HOSE x Bulk 20720A 2.5 x D 2.5 x J 4 x Bulk 20720L 1.5 x 50 B A HYDRANT HOSE ASSEMBLY 81321A 2.5 x B 2.5 x 75 INCLUDES A B Hose Ends (2)(Standard Hydrant) Clamp 2.5 (2) B C Cam-Loc Coupler 2.5 (Optional) 46549D Cam-Loc Adapter 2.5 (Not Shown) 20199B 2 ½ Hose End Nipple Gasket 20199D 1 ½ Hose End

52 WATER SYSTEM D-2 ASSEMBLIES & INSTALLATIONS AIR GAP INSTALLATION, K Street Elbow 2" 90 BLK N 10464R Pipe Nipple - 2 X Close 11046X Pipe Elbow 2 X 21/ B Hose Coupling 2 1/2" FEMA 20720A Water Hose - 2 1/2" X Hose Barb Coupling 2 1/2" Hose Clamp 1-9/ Hose Clamp - 4-1/8" -5" Clamp - #36 Worm Gear AIR GAP INSTALLATION Hose Barb Coupling 2" Float Ball 100MM 10460B Pipe Coupling 2" Buna Ball Seat 10460F Pipe Coupling 2-1/2" Y Strainer -2" 20199B Hose Coupling 2-1/2" FEMA Screen - 2" STNLS 20720A Water Hose - 2-1/2" X U - Bolt Hose Barb Coupling 2" 46122A Suction Hose - 2" X 1' Clamp - #36 Worm Gear Hose Basket Weldment Hose Barb Coupling 2" Fire Hose Adapter Hose- Suction/Discharge 54978L Pipe Nipple SCH40 2" X 3 LG Hose Basket Weldment 25 HOSE Air Gap Assembly Fill Tube Weldment HEAT EXCHANGER (NPT PORTS) 44914AHEAT EXCHANGER (SAE 4-BOLT PORTS) 44914BHEAT EXCHANGER (SAE 4-BOLT PORTS) ALIGNED ACCESSORY PARTS: GASKET NPT ADAPTER FLANGE BONNET ½ PET COCK TUBE PLUG WATER GUN ASSEMBLY INCLUDES: 20188A FEMALE COUPLER MALE COUPLER 31014AG 25 HOSE WATER GUN NOZZLE SEAL KIT

53 WATER SYSTEM D-3 RODDER PUMP PARTS HIGH PRESSURE RODDER PUMP (2100 SERIES, # )

54 WATER SYSTEM D-4 RODDER PUMP PARTS VACTOR PARTS LIST HIGH PRESSURE RODDER PUMP (# ) ITEM PART NO. QTY. DESCRIPTION NO PICTURE PISTON ROD PISTON - WATER END BRONZE 3 * PISTON SEAL X PISTON OIL END DUCTILE IRON SENSING ROD SENSING ROD YOKE C 2 SOCKET HD. CAPSCREW ½ 13 NC. X 1 ½ LG. X HIGH COLLAR LOCKWASHER ½ X COMPENSATOR WELD 10 A SEAL X SEAL RETAINER L 3 LOCKWASHER #10 X F 3 SCREW X ½ LG. X PISTON ASSEMBLY - COMPENSATOR HEX HD. CAPSCREW ½ X 1 ¼ LG. X C 2 LOCKWASHER ½ X PISTON BLOCK WELD END CAP PISTON X W 1 ROLL PIN 3/32 X ¾ LG. X BUSHING HAT TYPE SH. 22 * SEAL X SENSOR OIL END BLOCK 25 * O-RING X CYLINDER BARREL (OIL END) CENTER BLOCK S.S. CAPSCREW ¼ 20NC. X ¾ LG. X S.S. LOCKWASHER ¼ X SEAL KEEPER PISTON ROD SEAL CAPSCREW ¼ 20NC. X ¾ LG. X LOCKWASHER ¼ X SEAL PLATE O-RING X CYLINDER BARREL (WATER END) WATER END BLOCK C 6 FLATWASHER ½ X C 6 LOCKWASHER ½ X B 6 CAPSCREW ½ X 1 ¾ LG. X

55 WATER SYSTEM D-5 RODDER PUMP PARTS VACTOR PARTS LIST (CONT.) HIGH PRESSURE RODDER PUMP (# ) ITEM PART NO. QTY. DESCRIPTION NO PICTURE PUMP HANGER WELD RUBBER ISOLATOR O-RING X DRAIN PLUG O-RING X CHECK VALVE INTAKE MANIFOLD ELBOW WELD HIGH COLLAR LOCKWASHER 5/8 X T 8 SOCKET HD. CAPSCREW 5/8 X 3 ¼ LG. X HOSE CLAMP C 1 3 WATER HOSE X 18 LG INTAKE MANIFOLD TEE WELD BOLTING PLATE NUT 1 ½ 12 NF. X TRUSS ROD X O-RING X CHECK VALVE O-RING X HIGH PRESSURE BLOCK HIGH COLLAR LOCKWASHER ½ X A 4 SOCKET HD. CAPSCREW ½ X 4 LG. X S.S. SET SCREW 5/16 24NF. X ½ LG. X BREATHER 1/4 IN HIGH PRESSURE BLOCK SOCKET HD. CAPSCREW X 1/2 13NC. X 2 ½ LG. 66 * PISTON ROD O RING X U 1 STEEL SET SCREW 5/16 24NC. X ½ LG. X V 1 ¼ X 14 ½ HYDRAULIC HOSE E 1 ¼ 90 ADAPTER UNION D 1 ½ 90 ADAPTER UNION MALE * = INCLUDED IN SEAL KIT & A = INCLUDED IN SEAL KIT B = INCLUDED IN SEAL KIT 37496

56 WATER SYSTEM D-6 RODDER PUMP PARTS PISTON ROD PISTON WATER END BRONZE PISTON OIL END SENSING ROD SENSING ROD YOKE COMPENSATOR WELD SEAL RETAINER PISTON ASS Y COMPENSATOR DETENT BLOCK WELD

57 WATER SYSTEM D-7 RODDER PUMP PARTS END CAP PISTON BUSHING HAT TYPE SENSOR OIL END BLOCK CYLINDER BARREL (OIL END) CENTER BLOCK SEAL KEEPER PISTON ROD SEAL

58 WATER SYSTEM D-8 RODDER PUMP PARTS PORT COVER CYLINDER BARREL (WATER END) WATER END BLOCK PUMP HANGER WELDMENT RUBBER BUSHING DRAIN PLUG CHECK VALVE INTAKE MANIFOLD ELBOW WELDMENT HOSE CLAMP

59 WATER SYSTEM D-9 RODDER PUMP PARTS C 3 WATER HOSE X INTAKE MANIFOLD TEE WELDMENT BOLTING PLATE CHECK VALVE HIGH PRESSURE BLOCK BREATHER HIGH PRESSURE BLOCK V HYD HOSE ¼ X 14 ½ E ¼ 90 SWIVEL

60 WATER SYSTEM D-10 RODDER PUMP PARTS D ½ X 90 SWIVEL OIL SIDE SEAL KIT WATER SIDE SEAL KIT CONNECTOR FOUR WIRE CABLE FOR RODDER PUMP SENSOR

61 WATER SYSTEM D-11 JOINTS - FLEXMASTER FLEXMASTER ELBOWS FLEXMASTER STRAIGHT FLEXMASTER TEE " X 45 Elbow " Straight /2 Tee Fitting " X 90 Elbow /2" Straight /2" X 90 Elbow " Straight " X 45 Elbow /2" Straight "X 90 Elbow " Straight FLEXMASTER CLAMPS FLEXMASTER FLANGES FLEXMASTER GASKETS " Clamp " Flange " Gasket /2" Clamp /2" Flange /2" Gasket " Clamp " Flange " Gasket 40025D 4" Clamp 40025B 4" Flange 40025A 4" Gasket

62 WATER SYSTEM D-12 JOINTS - PVC PVC ADAPTERS PVC BARB Adapter Slip X MIPT " Hose Barb Adapter Slip X FIPT /2" Hose Barb PVC COUPLING PVC ELBOWS /2" Coupling: Slip X Slip /4" X 90 Street Elbow " x 90 Street Elbow /2" x 45 Street Elbow: Slip X Slip /2" x 90 Street Elbow: Slip X Slip PVC PLUGS PVC TEE /2" Pipe Plug " Barbed Tee " Pipe Plug /4" Pipe Plug " Pipe Plug " Pipe Plug

63 WATER SYSTEM D-13 JOINTS - RUBBER & SWIVEL RUBBER JOINTS "Rubber Elbow " Rubber Coupler " Rubber Coupler These rubber joints are used to join the aluminum water tanks on the 2100 Series Vactor SWIVEL JOINTS - ELBOWS /2" NPT 6000LB TM Swivel (Lateral Cleaning Kit) " Swivel Joint 200 TM Back Up Ring (Includes 40376) Chrome Balls /4" TM Swivel A Repair Kit Female 90 Swivel /4" TM Swivel SWIVEL JOINTS - STRAIGHT " TM Swivel /4" TM Swivel 6000 LB " Swivel Joint

64 WATER SYSTEM D-14 PUMPS PART #: WATER PUMP PART #: PUMP - FLUSHER PART #: TRASH PUMP 3" HPT PART #: 46730I TRASH PUMP

65 WATER SYSTEM D-15 LATERAL CLEANING LATERAL CLEANING KIT 16475B Service Tee 1/2" 16475D Service Tee 1" 16642A 1/2-45 Adapter Union Male 16642F 3/8-45 Adapter Union Male 16988C Adapter Str. Male 1/2" Bushing BLK Steel Reducer Bushing 1/2 To 3/ E Reducer Bushing 1 To 1/ A HYD Hose Ass'y - 1/2 X 31014J HYD Hose Ass'y - 1/2 X 40262V HYD Hose Ass'y - 3/8 X Ball Valve - 1/2" 5800 P U-Bolt W/ Nuts 5/ Hose Reel 3000 PSI Nozzle 30 5 Hole Air Hardnd Mounting Bracket Weld Nozzle Holder Weldment " Expansion Plug 83915A High Pressure Water Gun (6') (For use with Hydro Excavator Kit) 83915B - 36" Extension ass y 83915D - 35' High pressure hose ass y 83915F GPM replacement tip 83915G GPM replacement tip 20188JA - Male Twis-lok coupling 20188JB - Female Twis-lok coupling " Water Ring

66 WATER SYSTEM D-16 Y-STAINERS

67 WATER SYSTEM D-17 REAL CRAFT 46438L ITEM NO. PART. NO NO. REQ DESCRIPTION ITEM NO. PART NO. NO. REQ DESCRIPTON ITEM NO. PART NO. NO. REQ DESCRIPTION LED 1 Swivel Ass y ¼ Snap Ring LN 1 Latch Bushing LK 1 Sheave Ass y LM 1 Guide Roller & Pin Kit Drive Spring LL 1 Ass y LJ x 1 Screw Guide Arm & Roller Ass y LP 1 Latch Pawl Ass y LB 1 Spring Arbor /16-18 x 1 1/4 Screw LR 1 3/8-24 Hex Jam Nut LC 1 Gasket 15 S ½-13 Set Screw LG 1 Spring Case Stud LF 1 Spring Case and Rcht Ass y 16 S ½-20 Hex Flange Nut LS 4 ¼-20 Nyloc Nut #10-32 Hex Lock Nut LH 1 Base Casting LS 4 Washer LE 1 Main Shaft LA 1 Latch Spring 27 S Swivel Union ITEM NO. DESCRIPTION NO. RE Q MODEL D8600 OMP MODEL D8630 OMP MODEL D8640 OMP MODEL D8650 OMP MODEL D8800 OMP MODEL D8830 OMP MODEL D8840 OMP MODEL D8850 OMP 1 Hose Ass'y 1 None None Hose Bumper Ass'y 1 None 1-HR hr hr None 2-HR HR HR U-Bolt Hose Clamp Hose I.D. Leangth None 3/8" I.D. x 30' 3/8" I.D. x 40' 3/8" I.D. x 50' None 1/2" I.D. x 30' 1/2" I.D. x 40' 1/2" I.D. x 50' Reel Inlet Connection 1/2" F.P.T. 1/2" F.P.T. 1/2" F.P.T. 1/2" F.P.T. 1/2" F.P.T. 1/2" F.P.T. 1/2" F.P.T. 1/2" F.P.T. Maximum Operating P.S.I P.S.I P.S.I P.S.I P.S.I P.S.I. Pressure P.S.I. P.S.I. Maximum Operating Temp. 210 F 210 F 210 F`` 210 F 210 F 210 F 210 F 210 F

68 WATER SYSTEM D-18

69 WATER SYSTEM WATER PUMP, DP80-PARTS LIST REF. NO. PART NO. DESCRIPTION QTY Case, gear Gasket, Lid Screw, Cap 5/16" -18 UNC x 1/4" Steel Lid Nipple, Special Vent Cap, Pipe Gauge, Oil, With "O" Ring "O" Ring, 5/6" I.D., 7/16" O.D., 1/16" Thick Shaft, Pinion Spacer Shim Shim Cone, Bearing Cup, Bearing Cap, Open Cap, Closed Oil Seal Screw, Cap 3/8" - 16 UNC x 1" Steel Washer, Seal Crankshaft Cone, Bearing Cup, Bearing Cap, Bearing Shim, Plastic, Green, 6-7/32" x 5-1/32 x.015" Shim, Plastic, Pink, 6-7/32" x 5-1/32" x.003" "O" Ring, 5" I.D., 5-1/8" O.D., 1/16" Thick Crosshead Link, Ductile Iron Bushing Screw Cap += A4 Washer Bearing, Two Halves Wrist Pin Housing, Oil Seal Oil Seal Retainer, Oil Seal Housing Screw, Allen Gasket, Seat Housing Gasket, Retainer Plug, Pipe Magnetic Screw, Cap, 3/4"-10 UNC X 3", Steel, GR Lockwasher Screw, Cap, 5/8"-11 UNC x 2", Steel, GR 5 4

70 REF. NO. PART NO. DESCRIPTION QTY Spring Body, Fluid End A (L.P.) Body, Fluid End B (H.p.) Body, Fluid End AL-BR (L.P.) Drilled and Tapped for discharge value Cap, Valve, SST 6 51A "0" Ring 6 51B Ring Backup Valve, DetriN Seat, Suction Valve F.E.A (AB) F.E.A F.E.B Seat, Discharge Valve F.E.A (AB) F.E.A F.E.B Spring, Suction Valve Spring, Discharge Valve Retainer, Spring Screw, Cap, Nylok Spring, Packing for DP Plunger, Coated (2-5/8) Plunger, Coated (2-1/4) Plunger, Coated (2-1/8) Plunger, Coated (2) Plunger, Coated (1-3/4) Plunger, Coated (1-1/2) Plunger, Coated (1-1/4) Ring, Seal Back (2-5/8) Ring, Seal Back (2-1/4) Ring, Seal Back (2-1/8) Cartridge, Seal (2) Cartridge, Seal (1-3/4) Cartridge, Seal (1-1/2) Cartridge, Seal (1-1/4) 3 61A "O" Ring, Seal Cartridge (2) (1-3/4, 1-1/2, 1-1/4) 3 61B Ring, Backup, Seal Cartridge (2) (1-3/4, 1-1/2, 1-1/4) Packing, Plunger 2-5/8 (4/set) Packing, Plunger 2-1/4 (3/set) Packing, Plunger 2-1/8 (3/set) Packing, Plunger 2 (3/set) Packing, Plunger 1-3/4 (3/set) Packing, Plunger 1-1/2 (3/set) Packing, Plunger 1-1/4 (3/set) 3

71 REF. NO. PART NO. DESCRIPTION QTY Washer, Spring (2-5/8) Washer, Spring (2-1/4) Washer, Spring (2-1/8) for DP Washer, Spring (2) Washer, Spring (1-3/4) Washer, Spring (1-1/2) Washer, Spring (1-1/4) Lid, Cylinder Slinger Plug, Pipe, 3" " AL-BR Plug, Pipe, 1" " AL-BR 3

72 WATER SYSTEM D-19

73 WATER SYSTEM WATER PUMP, DP65 PARTS LIST REF.NO. PART NO. DESCRIPTION QTY Case, gear Gasket, Lid Screw, Cap 5/16" - 18 UNC x 7/8", Steel Lid Nipple, Special Vent Cap, Pipe Gauge, Oil, With "O" Ring "O" Ring, 5/16" I.D., 7/16" O.D., 1/16" Thick Shaft, Pinion Spacer Shim Shim Cone, Bearing Cup, Bearing Cap, Open Cap, Closed Oil Seal Screw, Cap 3/8"-16 UNC x 1" Steel Washer, Seal Crankshaft Cone, Bearing Cup, Bearing Cap, Bearing Shim, Plastic, Green, 6-7/32" x 5-1/32" x.015" Thick Shim, Plastic, Pink, 6-7/32" x 5-1/32" x.003" Thick "O" Ring, 5" I.D., 5-1/8" O.D., 1/16" Thick Crosshead & Piston Rod (N/A Separately) Link, Ductile Iron Bushing Screw, Cap Bearing, Two Halves Wrist Pin Housing, Oil Seal 3 * Oil Seal Retainer, Oil Seal Housing Screw, Allen 6 * Gasket, Seat Housing Kit for Ref. No. 19 & Spring Gasket Plug, Pipe, Magnetic Screw, Cap 3/4"-10 UNC x 3", Steel Nut, Hex, 3/4"-10 UNC, Steel Lockwasher 4

74 REF. NO. PART NO. DESCRIPTION QTY Screw, Cap, 5/8"-11 UNC x 2" Screw, Cap,.551"-14 Metric x Lockwasher for item * Follower 3 29 * Packing, "V" Rings Stud, 2-3/16" x 2-1/16" x 1-1/2", Stainless Steel Retainer 3 32 * Washer Spring Ring Body, Cylinder Body, Cylinder for AVAB Pump Nut, Hex, 5/8"-11 UNC, Steel Nut, Hex, 7/8"-14 UNF x 4-1/2" Stud, 5/8"-11 UNC x 3-5/16" Stud, 7/8"-14 UNF x 4-1/2" Clamp, Valve Cap Clamp Cylinder Cap Cap, Valve Cap, Valve for AVAB Pump 3 43 * "O" Ring, 2-3/8" x 2-9/16" x 3/32" Cap, Cylinder Cap, Cylinder for AVAB Pump 3 45 * "O" Ring, 3-1/4" x 3-1/2" x 1/8" Suction Valve and seat Complete Discharge Valve and Seat Complete 3 A Seat, Valve 6 B * Valve 6 C * Spring, Valve Suction 3 C * Spring, Valve, Discharge 3 D Retainer 6 F Screw, Cap 5/16"-24 UNF, Shouldered Lid, Cylinder Screw, Machine, 1/4"-20 UNC x 1/2" Washer Plug, 1/2" Pipe Plug, 1" Pipe Liner, Cylinder "O" Ring, 2-3/4" x 2-15/16" x 3/32" for liner Plug, 1-1/4" Pipe Plug, 3" Pipe 2 * Repair Kit (*'s x 1 carton & x 8 bag) 47539AA Liquid end rebuild kit AB= Aluminum Bronze

75 CONTENTS ENGINES Cummins Air Filters.. E-1 - E-2 Cummins Oil Filters...E-3 Perkins Engines..E-4 John Deere Engine Filters..E-5

76 ENGINES E-1 CUMMINS AIR FILTERS Cummins 6BTA5.9 Air Cleaner 45937B Cummins 6BTA5.9 Air Cleaner Filter Element (Starting Late 91) 45937C Inner Filter Element Cummins 6BTA5.9 AIR CLEANER

77 ENGINES E-2 CUMMINS AIR FILTERS Cummins 4BTA3.9 Air Cleaner Element Cummins 4BTA3.9 Air Cleaner A Breather Cap B Filter Breather Ass y

78 ENGINES E-3 CUMMINS OIL FILTERS HYDRAULIC OIL FILTER ASS Y HYDRAULIC OIL FILTER ASS Y Includes: Filter Head & Element Gauge Element LUBE FILTERS A Cummins 6BTA5.9 Lube Filter B Cummins 4BTA3.9 Lube Filter STRAINERS FOR HYDRAULIC OIL A Oil Strainer 30 Mesh B Oil Screen Hydraulic Tank C NPT Female Strainer D Diffuser E Strainer

79 ENGINES E-4 PERKINS ENGINES 71733E Oil Filter used on both 4 & 6cyl Perkins engines new and old FUEL FILTER AIR FILTER OUTER 71733H Old serial number 71733F Old Serial Number 71733X New 4 cyl serial number 71733Y New Serial Number 71733XA New 6 cyl serial number 71733XB New 6 cyl serial number Note: New cyl engines require both XA & XB filters AIR FILTER INNER 71733G 71733Z Old serial number New serial number Perkins uses two different filters depending on age. The new filters are for units shipped in 1996 and are for engines that start with Serial Number prefix AB New and old style filters are not interchangeable. Perkins engines starting with Serial Number prefix AB35015 and above use the new style filters. Engines with Serial Number prefix below AB35015 use the old filters.

80 ENGINES E-5 JOHN DEERE ENGINE FILTERS OIL FILTER 47828E Both 4 & 6 cyl engines FUEL FILTER 47828D 47826AA 4 cyl engine only 6 cyl engine only FAN BELT (NOT SHOWN) 47828H 47826A 4 cyl engine only 6 cyl engine only AIR FILTER 4 CYL 47791A 47791AA 47791AB Complete Ass'y Inner air filter Outer air filter 6 CYL Complete Ass'y 45937B Outer air filter 45937C Inner air filter NOTE: JOHN DEERE ENGINES REQUIRE A SPECIAL MIXTURE OF ANTIFREEZE AND A JOHN DEERE APPROVED CHEMICAL TO PREVENT DAMAGE TO THE CYLINDER LINERS. THIS MIXTURE HAS BEEN PREPACKAGED IN 5 GALLON CONTAINERS. THE PART NUMBER FOR THIS 5 GALLON CONTAINER IS 47965A

81 CONTENT TRANSMISSION SECTION Single Stage Clutch (45374)..F-1 Parts List for (45374).F-2 Two Stage Clutch (43127).F-3 Parts List for (43127).F-4 Single Stage John Deere Fluid Coupling DR (47781)...F-5 Parts List (47781)...F-6 Two Stage John Deere Fluid Coupling DR (47853)..F-7 Parts List (47853)...F-8 Transfer Case (45446) F-9 Parts List (45446)...F-10 Parts List Fluid Coupling 4 and 6 cylinder.f-11

82 TRANSMISSION F-1 SINGLE STAGE TRANSMISSION (# )

83 COTTA TRANSMISSION F-2 (# ) PARTS LIST ITEM PART NO. QTY. DESCRIPTION Hande Hole Cover (Bell Housing) Hose Assembly Input Shaft Spacer - Input Gear - Input (45 Teeth) Gear - Output (32 Teeth) Woodruff Key (Modified #1210) Housing - Sae #3 Bell Housing Output Output Shaft Case /2-13 x1 1/4 Hex Head Screw /4-20 x 5/8 Hex Head Screw /8-18 Half Nut /4 Inch Lockwasher /2 Inch Lockwasher /8 Lockwasher (Shakeproof) Pilot Bearing Ball Bearing Bearing Cup (Output Rear) Bearing Cone (Output Rear) Bearing Cone (Output Front) Bearing Cup (Output Front) Reducer 3/4 to 1/ Pipe Plug 3/ Magnetic Pipe Plug 3/ Fitting (Zerk) Fitting Fitting *Woodruff Key (MM. X 101) *Woodruff Key (MM. X 124) *Woodruff Key (MM. X 131) Input Shaft Snap Ring Output Shaft Snap Ring Input Bearing Snap Ring Input Shaft Oil Seal Output Shaft Oil Seal

84 (#45374) PARTS LIST CONTINUED Clutch Release Lever Clutch Release Shaft Breather * Shim (.020) * Shim (.007) * Shim (.005) Name Plate Oil Warning Tag Clutch Drive Ring Nut Washer Fork Key

85 TRANSMISSION F-3 TWO STAGE TRANSMISSION (#43127.A)

86 COTTA TRANSMISSION F-4 (#43127.A) PARTS LIST ITEM PART NO. QTY DESCRIPTION Cover Key 1/2 X 1/2 X Hose Assembly Spacer Spacer Spacer Gear Gear SEALHSG SEALHSG Gasket Gasket Shaft BellHsg.No Gasket Case Cover Carrier - Brg Key 1/2 X 1/2 X Shaft HHCS 1/2-13 X 1-1/ HHCS 3/8-16 X 3 PLN Nut-Hex Half 5/ Lockwasher 1/ Lockwasher 3/ Lockwasher 1/ Lockwasher SHKPRF BRG-Ball BRG-Ball 6309J BRG-Ball 6310J BRG-Ball 6313NRJ Dowelpin 5/8 DIA Bushing 3/4 X 1/ Plug-1/4 SQ HD Plug-3/4 MAG Pipe Fitting Alemite Bulkhead Adapter Elbow 402 X Fitting-Alemite

87 (#43127.A) PARTS LIST CONTINUED Woodruff Key RHMS 1/4-20 X 1/ Snap-Ring Snap-Ring Snap-Ring Seal Seal Lever X Shaft 1144E Breather Alemite Name Plate Wave Spring Washer Tag Oil Empty (Per) Clutch-TD SP211 X Drive-Ring 6931T Yoke X Nut B1509B Washer B1511B Key M2033AK Pilot Bearing Detroit 6V Pilot Bearing Cummins 6BTA5.9

88 TRANSMISSION F-5 SINGLE STAGE JOHN DEERE FLUID COUPLING DR (#47781)

89 TRANSMISSION F-6 PARTS LIST (#47781) ITEM VACTOR PIN NO. DESCRIPTION QPA KEY 1/2 X 1/2 1-11/ SPACER SPACER SPACER GEAR 53T GEAR 33T SEALHSG SEALHSG GASKET GASKET SHAFT BELL HOUSING GASKET.015/AN CASE F COVER CARRIER-BRG KEY 1/2 X 1/2 1-13/ SHAFT HHCS 1/2-13X1-1/2 PLN G HHCS 3/8-16X3-1/4 PLN G HHCS 1/4-13X1-1/4 PLN G LOCKWASHER 3/8 MED LOCKWASHER 1/2 MED BRG-BALL BRG-BALL BRG-BALL BRG-BALL 6313NR DOWELPIN 5/8DIA X 1-1/2LG BUSHING 3/4X1/8 HX BM PLUG-1/4 SQ HD PIPE PLUG-3/4 MAG PIPE X WASHER-SAE 3/ SNAP-RING SNAP-RING SPIROLOX RSN SNAP-RING AC SEAL SEAL BREATHER ALEMITE NAME PLATE Wave Spring Washer W TAG-OIL EMPTY FLUID COUPLING 1

90 TRANSMISSION F-7 TWO STAGE JOHN DEERE FLUID COUPLING DR (#47853)

91 TRANSMISSION F-8 PARTS LIST (#47853) ITEM. DESCRIPTION QTY. VACTOR PART NO. 3 Key 1/2 X 1/2 X 1-11/ SPACER SPACER SPACER GEAR 53T GEAR 33T SEALHSG SEALHSG GASKET GASKET SHAFT BELL HOUSING B 17 GASKET 015/AN CASE COVER F 20 CARRIER-BRG KEY 1/2 X 1/2 X 1-13/ BAFFLE SHAFT HHCS 1/2-13X1-1/2 PLN G HHCS 3/8-16X3-1/4 PLN G HHCS 1/2-13X1 PLN G HHCS 1/4-20X1/2 PLN G LOCKWASHER 3/8 MED LOCKWASHER 1/2 MED BRG-BALL BRG-BALL BRG-SPHER 21310E BRG-SPHER 21313CC DOWELPIN 5/8DIA X 1-1/2LG BUSHING 3/4X1/8 HX BM PLUG-1/4 SQ HD PIPE PLUG-3/4 MAG PIPE WASHER-SAE 3/ X 52 SNAP-RING SNAP-RING SPIRPLOX SNAP-RING AA 56 SEAL SEAL BREATHER ALEMITE NAME-PLATE 1 63 WAVE-SPRING-WASHER TAG-OIL EMPTY 1 67 FLUID COUPLING

92 TRANSMISSION F-9 TRANSFER CASE (#45446)

93 COTTA TRANSMISSION F-10 (# ) PARTS LIST ITEM PART NO. QTY. DESCRIPTION Spring - Disc End - Main Shift Rod Spring - Main Shaft Housing - Disc. Oil Seal Pin - Disc. Detent Fork - Disc Kit - Disc. Bearing Housing - Main Shift Lever - Disc. Shift Adapter - Spline (SAE "B") Adapter - Spline (SAE "C") Key Housing - Direct Drive Oil Seal Kit - Direct Drive Bearing Strap - Lifting Washer Carrier - Direct Drive Bearing Pack - PTO Shim Rod - Disc. Shaft Cover - Disc Clutch - Disc Spacer - Input Spacer - Pilot Shaft - Disc Clutch - Main Shaft Fork - Main Shift Rod - Main Shift Housing - Input Oil Seal Housing - PTO Housing - Pump Adapter (SAE "B") Housing - pump Adapter (SAE "C") Gear - Input (43 Teeth) Gear - Pump Drive (40 Teeth) Gear - PTO (43 Teeth) Shaft - Pump Drive Shaft - PTO Shaft - Input Bail - Disc. Detent Bail - Main Detent

94 (# ) PARTS LIST CONTINUED Screw - Set (3/8-16 X 1/2N) Washer Scap Ring (Spline Adapter) Snap Ring Snap Ring (Input Gear) Snap Ring (Direct Drive BRG) Oil Seal Oil Seal Oil Seal O-Ring Breather Pack - Pump Pad Shim Pack - Input Shim Pin - Yoke Nameplate (Green) Plug - Str. THD. (9/16-18) Window - Oil Level Tag - Oil Warning Plug - Shipping (SAE "B" Pad)

95 FLUID COUPLING F INCH FLUID COUPLING

96 FLUID COUPLING F PARTS LIST (15 IN) FLUID COUPLING 13 INCH (NOT SHOWN) FLUID COUPLING 13 INCH 47780A OUTER INPELLER FOR FLUID CPLG 47780B SEAL KIT FOR FLUID CPLG 47780C SHAFT SEAL - SINGLE LIP 47780D BEARING CARRIER D SPECIAL FLUID COUPLING OIL 2.5 GAL NOTE: THIS IS A SPECIAL FIRE RETARDANT HIGH TEMPERATURE OIL WHICH IS USED ONLY IN THE FLUID COUPLER.

97 CONTENTS ELECTRICAL Boxes. G-1 Junction Boxes...G-1 Compression Fittings. G-1 Chassis Lights G-2 Clearance Lights G-2 Flashing, Revolving & Strobe Lights G-2 Reflectors... G-2 Hose Reel & Warning Lights.G-2 Spot Lights.G-2 Light Assemblies... G-3 Arrowboards.. G-4 Flashing Lights.. G-4 Revolving Lights G-4 Revolving Light Installation.. G-4 Light Bulbs and Lenses. G-5 Light Bulbs.... G-5 Light Lenses... G-5 Brackets and Guards G-5 Pendant Controls... G-6 Relays and Sensors.... G-7 Relay Switches... G-7 Senders/Sensors..... G-7 Flasher Switches.... G-8 Flow, Speed, Throttle, Controls.....G-8 Joystick.. G-8

98 Load and Level Switches...G-9 Micro Switches.. G-9 Pressure Switches...G-9 Starter (Ignition) Switches G-10 Toggle Switches.G-10 Warning Alarms and Horns... G-11 Industrial Filtration Section... G-12 Bag Filtration System - Timer... G-13 Bag Filtration System - Diaphragm... G-14 Bag Filtration System - Solenoid Valve G-15

99 ELECTRICAL G-1 BOXES ELECTRICAL CONTROL BOX CALL WITH SERIAL NUMBER JUNCTION BOX Includes all internal mechanisms and cover COMPRESSION FITTINGS: A UNIVERSAL B /2 C /8

100 ELECTRICAL G-2 LIGHTS CHASSIS LIGHTS A CLEAR DRIVING LIGHT B LICENSE LIGHT C TAIL LIGHT MODULE L/H C TAIL LIGHT MODULE R/H D LICENSE PLATE LIGHT CLEARANCE LIGHTS A RED CLEARANCE LIGHT B AMBER CLEARANCE LIGHT C RED CLUSTER LIGHT D LIGHT BAR (BRACKET ONLY) LIGHTS FOR 3-LIGHT BAR: RED LIGHT YELLOW LIGHT FLASHING, REVOLVING & STROBE LIGHTS A REVOLVING BEACON TOGGLE SWITCH AMBER B 42988E 12V AMBER STROBE TOGGLE SWITCH 42988K FED. SIGNAL FIREBALL STROBE 2 AMBER 42988F LIGHT STROBE AMBER C AMBER STROBE "WHELEN" TOGGLE SWITCH D AMBER FLASHING LIGHT TOGGLE SWITCH

101 ELECTRICAL G-3 LIGHTS REFLECTORS A V RED B V AMBER C V AMBER D V RED E GROMMET (FOR ALL) HOSE REEL & WARNING LIGHTS A RED WARNING LIGHT ON HOSE REEL B GREEN WARNING LIGHT ON HOSE REEL C RED INDICATOR LIGHT FLOW ALARM SPOT LIGHTS A B HAND SPOT LIGHT MALE CONNECTOR FEMALE CONNECTOR BULB HALOGEN BULB BOOM WORK LIGHT BULB TOGGLE SWITCH

102 ELECTRICAL G-4 LIGHT ASSEMBLIES ARROWBOARDS *USE SAME AS (INCLUDES CONTROLLER) ARROWBOARD DUAL ARROW FLASHING ARROWBOARD WITH CONTROLS 46298D BULB (CAN USE 46299) 46298B CONTROLLER 46298A HOOD 46298C RELAY 45298E ARROW ARROWBOARD SINGLE ARROW ARROWBOARD CONTROL BOX BULB FLASHING LIGHTS FLASHING LIGHT BAR (4 LIGHTS) BASE BRACKET ASS Y AMBER FLASHING LIGHT FLASHING LIGHT BAR (3 LIGHTS) TOGGLE SWITCH FLASHING UNIT AMBER FLASHING UNIT BASE BRACKET REVOLVING LIGHT INSTALLATION INSTALLATION INCLUDES: TOGGLE SWITCH REVOLVING BEACON LIGHT AMBER LENS LIGHT MOUNTING BRACKET HALOGEN BULB

103 ELECTRICAL G-5 LIGHT BULBS & LENSES LIGHT BULBS A HAND SPOTLIGHT BULB B STROBE BULB (42988) C LIGHT BULB D BULB (FOR 34515, USE 40594) LIGHT LENSES A B AMBER LENS FOR & LIGHTS AMBER LENS FOR FLASHING LIGHT BRACKETS & GUARDS LIMB GUARD FOR REVOLVING & STROBE LIGHTS MOUNTING BRACKET FOR REVOLVING & STROBE LIGHTS ELECTRIC CORDS ' ELECTRIC CORD WITH SELF REWIND REEL (LEFT) ' ELCTRIC CORD WITH SELF REWIND REEL (RIGHT)

104 ELECTRICAL G-6 PENDANT CONTROLS BUTTON PENDANT BUTTON PENDANT CONTROL WITH 15 CABLE CONTROL WITH 30 CABLE A 30 CABLE CASE BOTTOM HALF FRONT CASE TOP HALF BACK CASE A FEMALE PLUG A FEMALE PLUG B MALE PLUG B BOOT (NOT SHOWN) C SWITCH C MALE PLUG D SWITCH BOOT D SWITCH E RED BOOT E SWITCH BOOT F KILL SWITCH F RED BOOT * CABLE G KILL SWITCH * A 30 CABLE * CABLE *44920-A 30 CABLE HARDWARE SCREW LOCKWASHER SCREW TERMINAL

105 ELECTRICAL G-7 RELAYS & SENSORS RELAY SWITCHES A B C D E F G H I HORN RELAY SM 8 RELAY BASE RELAY P-B, 12V, SPDT FLASHER RELAY BOSCH RELAY BASE BOSCH RELAY DUAL COIL DOUBLE LATCHING RELAY RELAY BASE RELAY, 12V, SPST USES BASE SENDERS/SENSORS A B C D E F G H I OIL TEMP SENDER FOR WATER TEMP SENDER FOR OIL PRESSURE SENDER FOR PROXIMITY SENSOR USES CONNECTOR OIL PRESSURE SENDER FOR OIL PRESSURE GAUGE LOW OIL PRESSURE SENDER FOR OIL PRESSURE GAUGE WATER TEMP SENDER FOR WATER TEMP GAUGE HIGH WATER TEMP SENDER FOR WATER TEMP GAUGE LOW WATER SENSOR (not shown)

106 ELECTRICAL G-8 SWITCHES FLASHER SWITCHES VOLT FLASHER NEG GROUND VOLT FLASHER POS GROUND FLOW, SPEED, THROTTLE CONTROLS A B C D E FLOW SWITCH SPEED SWITCH ESSDSA (NOT SHOWN) SPEED SWITCH FLOW ALARM MOUNTING BRACKET ELECTRIC THROTTLE SWITCH 15 VERNIER THROTTLE REPLACES JOYSTICK JOYSTICK, BOOM CONTROL 45108A KNOB BEZEL 45108C SWITCH

107 ELECTRICAL G-9 SWITCHES LOAD & LEVEL SWITCHES LEVEL SWITCH MICRO SWITCHES A B C D E MICRO SWITCH MICRO SWITCH LOAD LIMIT ARM SWITCH HI/LO SHUTDOWN 12V, 4 TERMINAL OIL FLOW MICRO SWITCH OBSOLETE (Not Shown) SWITCH 12V, 6 TERMINAL (NOT SHOWN) PRESSURE SWITCHES A PRESSURE SWITCH 4# B PRESSURE SWITCH 60# C D PRESSURE SWITCH PRESSURE SWITCH

108 ELECTRICAL G-10 SWITCHES STARTER (IGNITION) SWITCHES A B C STARTER PUSH BUTTON IGNITION SWITCH PERMISSIVE START SWITCH TOGGLE SWITCHES A B C D E F G H I TOGGLE SWITCH PUSH PULL SWITCH TOGGLE SWITCH TOGGLE SWITCH 3 POSITION THROTTLE SWITCH MICRO SWITCH TOGGLE HI/LO SWITCH FOR WHELEN STROBE LIGHT PERMISSIVE START SWITCH STARTER TOGGLE SWITCH NOT SHOWN 40241A TOGGLE SWITCH AUX. ENG. THROTTLE SWITCH 3 POSITION 46629A RUBBER BOOT

109 ELECTRICAL G-11 WARNING ALARMS & HORNS BODY LOAD LIMIT ALARM MAJOR COMPONENTS: HORN 12 VOLT FLOAT CONTROL ARM TOGGLE SWITCH MICRO SWITCH TRIGGER STRIP BOSCH RELAY ARM FOR MICRO SWITCH WARNING HORNS & ALARMS A B VOLT HORN ELECTRONIC BACK-UP ALARM

110 ELECTRICAL G-12 PENDENT CONTROLS 2 Button Pendant Control Part No Guzzler Units 5 Button Pendant Control Part No K 7 Button Pendant Control Part No J 7 Button Pendant Control Part No M Vacuum Enhancer 7 Button Pendant Control Part No L (Vacuum Relief) 9 Button Pendant Control Part No R (NOT SHOWN) Toggle Switch ON / OFF Male plug Female plug Double button switch (up, down, etc) Otto switch

111 ELECTRICAL G-13 BAG FILTRATION SYSTEM - TIMER INDUSTRIAL FILTRATION SECTION PART NO. DESCRIPTIONS TIMER BOARD TIMER BOX (ONLY) TIMER BOX ASS'Y. (INCL/BOARD)

112 ELECTRICAL G-14 BAG FILTRATION SYSTEM - DIAPHRAGM INDUSTRIAL FILTRATION SECTION DIAPHRAGM VALVE ASS'Y. PART NO DIAPHRAGM VALVE REPAIR KIT PART NO DESCRIPTION ITEM PART NO. QTY CAP SCREW BONNET DIAPHRAGM SPRINGS * DIAPHRAGM * VALVE BODY SPARE PARTS KIT *

113 ELECTRICAL G-15 BAG FILTRATION SYSTEM - SOLENOID VALVE SOLENOID VALVE ASS'Y. SOLENOID VALVE MOLDED COIL PART NO PART NO ITEM PART NO. DESCRITPTION QTY RETAINING RING NAMEPLATE HOUSING COVER SPACER YOKE SLEEVE MOLDED COIL 2 * GASKET SOLENOID BASE SUB-ASS'Y SPRING CORE 'O' RING 1 * SPARE PARTS KIT 1 PART NO SOLENOID VALVE SPARE PARTS KIT

114

115 CONTENTS GAUGES Electrical Gauge.H-1 Hourmeter.. H-1 Oil & Water Sight Gauges. H-1 Pressure Gauges.H-2 Vacuum Gauge.. H-2 Tachometers...H-2 Temperature Gauges. H Hi/Lo Shutdown Kit H-3 John Deere Gauges.H-4

116 GAUGES H-1 ELECTRICAL GAUGE VOLT METER HOUR METER_ HOUR METER DAMPENER OIL & WATER SIGHT GAUGES A B C WATER TANK FILL GAUGE ASS Y 26 FOR MODELS # 800, 810, 2100, 815 WATER TANK FILL GAUGE ASS Y 45 FOR MODELS #400, 810E OIL SIGHT GAUGE 2100 HYDRAULIC OIL TANK FILTER (NOT SHOWN) RED BALL (NOT SHOWN)

117 GAUGES H-2 PRESSURE GAUGES A B PRESSURE GAUGE 200PSI PRESSURE GAUGE 3000 PSI 46846C PRESSURE GAUGE 5000 PSI (NOT SHOWN) C D E F G PRESSURE GAUGE 600 PSI PRESSURE GAUGE 75 PSI OIL PRESSURE GAUGE 100 PSI WITH LIGHT OIL PRESSURE GAUGE 100 PSI OIL PRESSURE GAUGE 100 PSI FOR SENDER & LOW OIL PRESSURE SENDER VACUUM GAUGE BLOWER 46846A 6" VACCUM GAUGE VAC. GAUGE TO MEASURE NEGATIVE PRESSURE ON TRUCKS W/ BLOWERS TACHOMETERS A B C ELECTRIC TACHOMETER RPM FORD 300 GAS ENG. OR DIESEL ELECTRIC TACHOMETER RPM 453 DIESEL INCLUDES: RED, YELLOW, & BLACK WIRE TACHOMETER RPM: FOR CUMMINS 4 & 6 CYLINDER ENGINES 12 V ON AUX. ENG. GAUGE PANEL (NOT SHOWN)

118 GAUGES H-3 TEMPERATURE GAUGES A B C D TEMP GAUGE, F WATER TEMP GAUGE, F (NOT SHOWN) INCLUDES: SENDING UNIT OIL TEMP GAUGE, F WATER TEMP GAUGE, F AIR TEMP GAUGE -NOT SHOWN E F TRANSMISSION OIL TEMP GAUGE, F USES SENDER WATER TEMP GAUGE, F USES SENDER & HIGH WATER TEMP SWITCH HI/LO SHUTDOWN KIT A B C SWITCH TEMPERATURE GAUGE WITH 6 CORD, F PRESSURE GAUGE 0 75 PSI OPTIONAL GAUGE: D TEMPERATURE GAUGE WITH 12 CORD, F

119 GAUGES H-4 JOHN DEERE GAUGES B A B Tachometer / Hourmeter B M Voltmeter C S Water temperature D R Oil Pressure A D C

120

121 CONTENTS VALVES A Air Valves.. I-1 Butterfly Valves. I-1 Check Valves. I-1 Ball Valves. I-2 Directional Valves. I-3 - I-5 Flow Control Valves..I-6 Gate Valves....I-6 Relief Valves..I-7 Selector Valves.. I-8 Sequence Valves I-8 Shuttle Valves I-8 Solenoid Valves. I-9 Water Valves..I-9

122 VALVES I-1 AIR, BUTTERFLY, CHECK AIR VALVES A B C D PRESSURE PROTECTION VALVE 3-WAY SOLENOID AIR VALVE AIR VALVE AIR REGULATING VALVE BUTTERFLY VALVES A BUTTERFLY VALVE HANDLE A B C B C BUTTERFLY VALVE HANDLE THROTTLING PLATE 4 O-RING BUTTERFLY VALVE CHECK VALVES A B C D CHECK VALVE 2" CHECK VALVE 3/8" CHECK VALVE, IN LINE 1 1/4" CHECK VALVE E 44130A 1" NICKEL PLATED CHECK VALVE F /4" CHECK VALVE G 45896B 1/2" CHECK VALVE H /4" CHECK VALVE

123 VALVES I-2 BALL 2-WAY BALL VALVES COMPLETE /4" BALL VALVE /2" BALL VALVE /4" BALL VALVE " BALL VALVE /4" BALL VALVE UNITS BUILT PRIOR TO 1998 A B C D E BALL BALL BALL STEM VALVE VALVE VALVE HANDLE NUT STEM BALL REPAIR KIT ¼ ½ ¾ 46581A 46581B 46581C 46581D 46581E ¼ BALL VALVE/AIR ACTUATED HYCON HANDLE 5800 PSI 40576A HYCON BALL VALVES 47043D 3/8" 4 WAY BALL VALVE (NOT SHOWN) /8 3-WAY BALL VALVE " 3 WAY BALL VALVE (HIGH PRESSURE) /4" 3 WAY BALL VALVE (HIGH PRESSURE) /2" 3 WAY BALL VALVE NOT SHOWN HANDLE SEAL KIT

124 DIRECTIONAL VALVES I-3 PART # WAY VALVE ASS Y (1989 and older) SEAL KIT PART #45706 Directional Valve For Rodder Pump 45706C Coil Dir. Control Valve 2103 PART#46833A Rodder Pump Directional Valve D-08 PART #: Directional Valve Seal Kit

125 VALVES I-4 DIRECTIONAL PART #45556B REEL SPEED CONTROL FLOW CONTROL VALVE REPLACES A SEAL KIT SEAL KIT FOR KNOB HANDLE PIN KIT FOR BRACKET FOR HANDLE PART #46514A DIRECTIONAL VALVE REPLACES PART #70507 HANDLE KIT (USE W/PRINCE, GRESEN, AND MOST OLD VALVES) PART #46515A DIRECTIONAL VALVE REPLACES PART #70507 OR 46515AA HANDLE KIT

126 VALVES I-5 DIRECTIONAL PART #45300 SINGLE BANK VALVE PART #45301 DOUBLE BANK VALVE DIRECT VALVE BOOM SOLENOID ASS Y COIL PART #45302 TRIPLE BANK VALVE PART #45653 QUADRUPLE BANK VALVE W/ PILOT CHECK SOLENOID PART # QUADRUPLE BANK VALVE W/ PILOT CHECK SOLENOID AND 70303B HAND JACK

127 VALVES I-6 FLOW CONTROL, GATE FLOW-CONTROL VALVES A 40460A ¼ DELTROL BOOM VALVE B FLOW CONTROL VALVE A B C C 45142A FLOW CONTROL VALVE ½ GATE VALVE ¾ GATE VALVE A 1 GATE VALVE HANDLE ¼ GATE VALVE HANDLE ½ GATE VALVE HANDLE GATE VALVE HANDLE ½ GATE VALVE HANDLE 20265A HANDLE SPLINED GATE VALVES GATE VALVE HANDLE A B C LEVER GATE VALVES A G 2" Lever Gate Valve 40019GA Handle B A 3" Lever Gate Valve 40019C Handle C B 4" Lever Gate Valve 40019F Handle 40019H 6" Lever Gate Valve 40019I Handle (NOT SHOWN)

128 VALVES I-7 RELIEF RACINE VALVE FOR BOOM (USE 60628) NOT SHOWN A B C RELIEF VALVE 700 PSI BRONZEL (WATER) FULFLO RELIEF VALVE CAST IRON (PRE-SET PSI) CHAR-LYNN RELIEF VALVE 2500PSI D " BAIRD VALVE E RELIEF VALVE 2100 PSI FOR & PUMPS (NOT SHOWN) D A 46647A RELIEF VALVE 3000 PSI B 46646A RELIEF VALVE 3000 PSI FOR RECIRCULATOR " VACUUM RELIEF VALVE RELIEF VALVE CAT PUMP 10 GPM, 2000 PSI PART #: WAY PILOT VALVE PIN ROLLER SEAL

129 VALVES I-8 SELECTOR, SEQUENCE, SHUTTLE SELECTOR VALVE SELECTOR VALVE 46644A KNOB 46644B QUAD RING 46644C SEAL KIT SEQUENCE VALVES A 44310A 1500 SINGLE SEQUENCE VALVE SEAL KIT CARTRIDGE B 44311A DUAL SEQUENCE VALVE SEAL KIT SHUTTLE VALVE SHUTTLE VALVE

130 VALVES I-9 SOLENOID, VACUUM RELIEF, WATER SOLENOID VALVES A B SOLENOID VALVE FOR DISCHARGE VALVE SOLENOID A MAC AIR VALVE FOR CONTINUOUS FILL & VACUUM BREAKER HOSE REEL LOCK AIR CYL (NOT SHOWN) WATER VALVES A B ¼ DRAIN COCK ½ PET COCK MINI BALL VALVE (NOT SHOWN) C MODIFIED DISCHARGE VALVE

131 CONTENTS BODY PARTS Adhesives, Band-Lok,& Tape J-1 Band-Lok Gaskets..J-1 Door Seals-Rear.J-1 Round Gaskets... J-2 Square Gaskets...J-3 Transition Gaskets. J-4 Augers J-5 Hanger Bearing.. J-6 Flanged Bearing.J-6 Bearing Hanger Bracket.J-6 Auger Door Clamp.J-7 Auger Door Hinge. J-7 Shaft and Hinge Ass y... J-8 Discharge Flange Weldment. J-8 Plate and Bushing Assembly. J-8 Waste Packing Seal Housing. J-9 Bulk Graphite Abestos Packing.J-9 Hydraulic Motor Mounting Bracket.. J-10 Hydraulic Motor Mounting Plate...J-10 Boom Weldment J-11 Debris Inlet Assembly J-11 Cover Plate J-12 Back Plate Gasket.. J-12 Rotating Boom Bearing. J-13 Inlet Replaceable Baffle Weldment...J-13 Clean Out Door Lock Assembly J-14 Top Door Lock Assembly. J-14

132 Hinge Pin... J-14 Wet Door Lock Handle Assembly.J-15 Toggle Clamp J-15 Toggle Bolt J-15 Cover Weldment J-15 Clean Out Door Weldment J-15 Vent Door Weldment.J-16 Hinged Wet Door Assembly..J-16 Removable Door Assembly... J-16 Rear Door Weldment. J-17 Rear Door Lock Hook Cylinder Mounting Weldment.. J-18 Hook Guide Weldment.. J-18 Grabber Hook Weldment...J-19 Roller Shaft J-19 Mounting Block. J-20 Guide Assembly.J-20 Hinge Take-Up Block Weldment.. J-20 Hinge Lug.. J-20 Cyclone J-21 Cyclones R.H. and L.H..J-22 Silicone Rubber Seal..J-23 Screen Weldments R.H. and L.H...J-24 Hinge Take-up Block Weldment... J-24 Vacuum Box.. J-25 Striping Kit J-26 Safety Decal Kit.J-27

133 BODY PARTS J-1 ADHESIVES, BAND-LOK, & DOOR SEALS ADHESIVES, SEALANTS, &TAPE A A Seal Tape 1-1/2 X 50 [Tape] B oz Silicone for Gaskets-Red [Sealant] C Silicone Rubber Sealant-Clear [Sealant] D oz Black Glue [Adhesive] E oz Yellow Glue Weatherstrip [Adhesive] BAND-LOK GASKETS Band-lok Gasket Band-lok Gasket Band-lok Gasket DOOR SEALS-REAR A D P Door Seal 305 B Rear Door Seal For Round Body B F 325 Rear Door Seal For Square Body B H 360 Rear Door Seal for 2116

134 BODY PARTS J-2 ROUND GASKETS Black Rubber Gasket 8 Holes Red Rubber Gasket 10-1/8" ID x 10-5/8 OD: 4 Bolt Holes & 4 Pins ID 12-5/8 OD: 8 Holes 16585A 8" Rubber 4 Holes, 4 Nub Red Rubber Gasket 6 ID x 8 OD: 12-Holes Debris Inlet Gasket, Red Rubber 8-1/8 ID x 10-1/2 OD: 8-Slots Cover Gasket Fan Inlet, Red Rubber 10-5/8 OD: 8-Holes Inspection Door Gasket, Red Rubber 6-1/2 OD: 3-Holes Cover Plate Gasket, Black Rubber 19-1/2 OD: 4 Holes (not shown)

135 BODY PARTS J-3 SQUARE GASKETS Clean-Out Cover Gasket, Red Rubber HYD Tank Cover Gasket Red 4-1/2 x 4-1/2 ID: 6-1/2 x 6-1/2 OD Rubber 7-3/8 x 20-1/4 ID: 4-Holes 10-7/8 x 23-3/4 OD 18-Holes HYD Tank Cover Gasket, Red Rubber HYD Tank Cover Gasket 400, Red 5-1/4 x 6-1/2 ID: 9 x 10 OD Rubber 5 x5 ID:7-1/2 x 7-1/2 8-Holes OD 8-Hole Fan Inlet Gasket, Red Rubber Red Rubber Gasket 5-3/4 x 20-3/4 ID: 10-1/4 x 25 OD 6-1/2 x 6-1/2 ID: 9 x 9 OD No Holes 16-Holes Red Rubber Gasket Cyclone Inlet Gasket, Red Rubber 3-7/8 x 15-3/4 ID: 6-3/8 x 18-1/4 OD 8 x 10 ID: 11 x 13 OD 20-Holes 16-Holes Debris Inlet Gasket, Red Rubber HYD Tank Cover Gasket, Red 8-11/16 x 12-11/16 ID:13-11/16 x 18 OD Rubber 8-1/2 x 8-1/2 ID: No Holes 11 x 11 OD 12-Holes Cover Gasket, Red Rubber Red Rubber Gasket 8 x 8 OD: 4-Holes 6 x 8 OD: 4-Holes Cover Plate Gasket, Red Rubber Door Installation Gasket, Black Rubber 7 x 8 OD: 4-Holes 6-1/2 x 14-1/2 OD: No Holes Cover Plate Gasket Red Rubber Debris Inlet Plate Gasket, Red Rubber 8 x 16 OD: 6-Holes 10 x 12 OD: 12-Holes Door Inlet Gasket, Red Rubber Door Gasket, Black Rubber 6 x 8 OD: 2-Holes 12 x 12 OD: 5-Holes Inspection Plate Gasket, Red Rubber License Light Gasket, Red Rubber 11-1/8 x 11-1/8 OD: 12-Holes Formed Gasket

136 BODY PARTS J-4 TRANSITION GASKETS Transition Gasket A Air Chamber Gasket B Air Inlet Gasket TRANSITION SPONGE SEALS A Air Chamber Sponge Seal B Air Inlet Sponge Seal TRANSITION SEALS-2100 \\ A Inlet Boot Uses Band Clamp B A Cross Over Tube Uses SS Band Clamp C Air Inlet Seal Uses Seal Holder

137 BODY PARTS J-5 AUGERS PART NO UNLOADING AUGER ASSEMBLY PART NO DIA. ELEVATING AUGER ASSEMBLY PART NO UNLOADING AUGER ASSEMBLY * PART NO UNLOADING AUGER ASSEMBLY ** *NOTE: UNLOADING AUGER IS FOR APPLICATIONS WHERE THE AUGER IS REMOVEABLE FROM THE RIGHT REAR SIDE OF THE DEBRIS BODY ** UNLOADING AUGER IS USED WHEN THE AUGER IS CONTAINED IN THE REAR DOOR ASSEMBLY

138 BODY PARTS J-6 AUGER ACCESSORIES HANGER BEARING PART NO FLANGED BEARING PART NO BEARING HANGER BRACKET PART NO

139 BODY PARTS J-7 AUGER DOOR PARTS CLIP AUGER DOOR CLAMP PART NO ARM AUGER DOOR HINGE PART NO

140 BODY PARTS J-8 ELEVATING AUGER ACCESSORIES SHAFT AND HINGE ASSEMBLY PART NO DISCHARGE FLANGE WELDMENT PART NO PLATE AND BUSHING ASSEMBLY PART NO

141 BODY PARTS J-9 ELEVATING AUGER ACCESSOIES WASTE PACKING SEAL HOUSING PART NO BULK GRAPHITE ASBESTOS PACKING PART NO NOTE: FOR MATERIAL TO REPACK ONE HOUSING, ORDER 1 PC A

142 BODY PARTS J-10 ELEVATING AUGER ACCESSORIES HYDRAULIC MOTOR MOUNTING BRACKET PART NO HYDRAULIC MOTOR MOUNTING PLATE PART NO

143 BODY PARTS J-11 BOOM TURRET BOOM WELDMENT PART NO DEBRIS INLET ASSEMBLY PART NO

144 BODY PARTS J-12 BOOM TURRET ACCESSORIES COVER PLATE PART NO BACK PLATE GASKET PART NO

145 BODY PARTS J-13 BOOM TURRET ACCESSORIES ROTATING BOOM BEARING PART NO INLET REPLACEABLE BAFFLE WELDMENT PART NO

146 BODY PARTS J-14 DOOR LOCKS AND HANDLES CLEAN OUT DOOR LOCK ASSEMBLY PART NO TOP DOOR LOCK ASSEMBLY PART NO USE FOR: LEFT AND RIGHT SIDE DUST BOX DOOR (2045) BAGHOUSE DOOR (1030) HINGE PIN PART NO NOTE: PART NO HAS BEEN REPLACED BY PART NO USE THIS NUMBER TO ORDER DOOR LOCK ASSEMBLIES ON THIS PAGE

147 BODY PARTS J-15 DOOR LOCKS AND HANDLES WET DOOR LOCK HANDLE ASSEMBLY PART NO TOGGLE CLAMP PART NO TOGGLE BOLT PART NO

148 BODY PARTS J-16 DOORS COVER WELDMENT PART NO CLEAN OUT DOOR WELDMENT PART NO

149 BODY PARTS J-17 DOORS VENT DOOR WELDMENT PART NO HINGED WET DOOR ASSMEBLY PART NO REMOVABLE DOOR ASSEMBLY PART NO

150 BODY PARTS J-18 REAR DOOR REAR DOOR WELDMENT PART NO NOTE: THIS DOOR MAY BE ORDERD AS A COMPLETED ASSEMBLY (LOCKING BARS, LOCK CYCLINDER, REAR DOOR SEAL, INSTALLED) AS PART NO

151 BODY PARTS J-19 REAR DOOR GRABBER PARTS REAR DOOR LOCK HOOK CYLINDER MOUNTING WELDMENT PART NO HOOK GUIDE WELDMENT PART NO

152 BODY PARTS J-20 REAR DOOR GRABBER PARTS GRABBER HOOK WELDMENT PART NO L (Left) 39193R (Right) * AFTER THIS TRUCK # USE ROLLER SHAFT 1 1/2 X 2 1/4" PART NO

153 BODY PARTS J-21 REAR DOOR PARTS MOUNTING BLOCK PART NO GUIDE ASSEMBLY PART NO HINGE TAKE-UP BLOCK WELDMENT PART NO

154 BODY PARTS J-22 REAR DOOR PART FOR MODEL 2045 & 1645 VACTOR ONLY HINGE LUG PART NO CYCLONES CYCLONE PART NO

155 BODY PARTS J-23 CYCLONES R.H. CYCLONE PART NO L.H. CYCLONE PART NO CYCLONES CYCLONE WELDMENT (Standard) 62526C CYCLONE WELDMENT (Abrasion Resistant) CYCLONE WELDMENT (12 gauge material) 63169A CYCLONE WELDMENT (SS) 63169B CYCLONE WELDMENT (Blower 3/16 mat) 63169C CYCLONE WELDMENT (3/16 material) CYCLONE WELDMENT (2115 only) CYCLONE WELDMENT ( )

156 BODY PARTS J-24 SEAL SILICONE RUBBER SEAL PART NO NOTE: THIS SILICONE RUBBER SEAL MATERIAL MAY BE PURCHASED IN ANY LENGTH UP TO 20 FT. SAFETY DECAL KIT INDUSTRIAL DECAL KIT PART NO MODEL 2100 MUNICIPAL DECAL KIT ORIGINAL VACTOR DECAL SET DESIGNED TO ENHANCE OPERATOR SAFETY AND PROMOTE VEHICLE EFFICIENCY

157 BODY PARTS J-25 SCREENS SCREEN WELDMENT - L.H. PART NO SCREEN WELDMENT -R.H. PART NO HINGE TAKE-UP BLOCK WELDMENT PART NO

158 BODY PARTS J-26 VACUUM BOX MODEL 2045 VACUUM BOX INSTALLATION - COMPLETE NOTE: THIS PART IS AVAILABLE AS A WELDMENT ONLY (LESS CYCLONES, SCREENS, DOORS, AUGERS, ECT.) AS PART NO STRIPPING KIT VACTOR STRIPING KIT PART NO

159 CONTENTS STORAGE & TOOL ACCESSORIES Hose Basket... K-1 Safety Cone Storage Rack. K-1 Tool Boxes.K-2 Water Cooler Storage Rack... K-2 Basin Tools K-3 Catch Basin Nozzle Handle... K-3 Hydrant Wrench.K-3 Jet Digger...K-4 Manhole Hooks..K-4 Offset Manhole Roller... K-4 1 Root Cutter Kit..K-5 Saw Attachments... K-5 Rodder Pump Tools... K-6 Tow Hooks.K-7 Water Nozzle Test. K-7 Helpful Tools. K-8

160 TOOLS AND ACCESSORIES K-1 STORAGE Hose Basket The hose basket can be mounted anywhere on the unit where a fill hose may be needed, and can store up to 25 feet of 2-1/2 inch hose Safety Cones Storage Rack Use the Safety Cone Storage Rack for easy access and convenient storage of safety cones Fold Down Step FENDERS A Single Aluminum Fender B Single Plastic Fender A Aluminum Tandem Fender Mud Flaps (NOT SHOWN) Front 24 X Rear 24 X 33

161 STORAGE & TOOL ACCESSORIES K-2 STORAGE TOOL BOXES Tool Box 12 x 14 x Tool Box 12 x 12 x Tool Box 16 x x Tool Box 18 x 18 x Tool Box 18 x 18 x Tool Box 18 x 18 x 48 These tool boxes are installed with locks and weather proof protection. Call us with your serial number if you are interested in complete Tool Box Assemblies for your unit WATER COOLER STORAGE RACK Install a Water Cooler Storage Rack to provide a way to keep your operators cool during the hot summer months

162 STORAGE & TOOL ACCESSORIES K-3 TOOLS aaa B C BASIN TOOLS A B C Basin Spoon Basin Shovel 8FT. Basin Retriever 8 FT. Reach in, scrape out or pick up objects easily with an assortment of basin tools CATCH BASIN NOZZLE HANDLE This handle clamps around the aluminum catch basin nozzle or pipe to provide the operator with an easier means to maneuver the catch basin nozzle HYDRANT WRENCH This wrench can conform to most types of hydrant bolts and nuts

163 STORAGE & TOOL ACCESSORIES K-4 TOOLS JET DIGGER This item is used to dig out and remove dirt quickly, easily and efficiently. MANHOLE HOOKS Grate Lifting Hook Ass y Lid Lifter Hook Not Shown To gain access to sewer lines use our grate hooks or lid lifter hooks OFFSET MANHOLE ROLLER This roller is used when the Vactor is not positioned over the manhole. It is connected to the manhole to allow the Rodder Hose to slide into the hole without causing abrasion.

164 STORAGE & TOOL ACCESSORIES K-5 TOOLS ROOT CUTTER KIT INCLUDES: 43516A SKID, 6" for STD root cutter B SKID, 8" " " " " 43516C SKID, 10" " " " " 43516D SKID, 12" " " " " 43516E SKID, 15" " " " " 43516F MTG Bracket for skids on Maintenance Wrenches Motor Assembly Remove roots and clear your sewer lines with water pressure. The root cutter can be installed on the end of the rodder hose to cut away and clear sewer lines from 6 to 15. SAW ATTACHMENTS Spiral Saw Spiral Saw Spiral Saw Spiral Saw Spiral Saw Select a saw for the exact size line you are cleaning.

165 STORAGE & TOOL ACCESSORIES K-6 TOOLS RODDER PUMP TOOLS A B C Ring Compressor Ass y Piston Rod Guide Spanner Wrench These are the same tools that Vactor, Mfg. uses when assembling the rodder pump. The spanner wrench is used for tightening the rodder pump piston to the rod. The Ring Compressor Assembly is used to compress the graphite seal on the rodder pump piston so that the rodder barrel can slide on easily. Finally, the Piston Rod Guide is used to guide the piston rod through the center block seals preventing damage to either part Barrel Removal Tool- This is a recently designed tool to aid in removing barrels from the rodder pump. The tool clamps to the barrel, the threaded rod is then turned pulling the barrel over the piston Barrel Pusher Tool- This makes installing the water or oil barrel a breeze. Used in conjuction with the Ring Compressor shown above. The tool is bolted to the work bench. The Barrel is positioned properly. Simply turn the hand crank to push the barrel on to the pump.

166 STORAGE & TOOL ACCESSORIES K-7 TOOLS TOW HOOKS A B Tow Hook Pintle Hook Get a hold on a Vactor in the proper place with the Tow Pintel Hooks. WATER NOZZLE TEST CANISTER NOZZLE TEST CANISTER This canister has been designed to contain and redirect water coming from the nozzle to allow for testing the units water system C Pin Removal tool and 47841K Crimp tool These are must tool to work on the new Vactor wire harness. The pin removal tool is used to remove the wire pins from the water proof connector. The Crimp tool is used to crimp new ends on the wire. FLOW METER A A Flow Meter GPM Flow Meter GPM (not shown) B Flow Meter 0-20 GPM B