V Diamond Chain Harrow Parts Manual 2010 Model

Transcription

1 V Diamond Chain Harrow Parts Manual 00 Model

2 Contents Serial Number Location 3 Draw Bar Frame 4 Front A Frame Assembly 6 Centre Frame 8 Left Hand Inner Wing 0 Left Hand Outer Wing Right Hand Inner Wing 4 Right Hand Outer Wing 6 Rear A Frame (Pg.) 8 Rear A Frame (Pg.) 0 Rear Tail Front Module 4 Rear Module 6 90 Series Stub Axle - Machines 8 75 Series Stub Axle - Machines 30 SH Stub Axle - 30,40,45 (Up to 0/0/09) 3 SH Stub Axle - 30,40,45 USA (Up to 9/0/09) 34 KCT6S - 6 Stud Kelly Hub. Toyota Pattern 5 Wheels 36 Up to 6//09 36 PCHB-55 Swivel Unit 38 PCHB-553 Swivel Unit 40 Chain Tension Adjustor 4 Chain 44 Decals 46 Hydraulic Sequence Valve 48 Module Chain Tensioner Prepared By Kelly Engineering PO Box 00 Booleroo Centre 548 South Australia Ph: Fax: USA: Copyright 00

3 Serial Number Location. Year of Manufacture. Number of machine made in that year 3. Model Size and/or type N.B The Serial No. is stamped into the plate using metal punches 3 3

4 Draw Bar Frame Key Part No. Part Name Qty Description Serial No. Model PC0-08 Drawbar Frame Welded A frame PC0-09 Tow Hitch Welded tongue and arm assy ,45,45R, R, 4 KE Drawbar Bush Hardened Drawbar Insert Suit Pin 5 B3077 mm x 0mm zinc plated pin R Clip 4mm 6 BOM065 Tow Hitch Pin Retaining Bolt Bolt M0x65 Nyloc Nut M0 Sub with M x 65 Bolt and nyloc 00-7 PC-0-06 Tow Hitch Pin 35mm x 75mm 8 PC0-3 9 CHHT3 Safety Chain long 3 Circlip8 Drawbar bush retaining clip D Circlip - Internal assembly 0 CMAH3N KESCLA Safety chain Latch Assembly Fits to 9 3 PC0-6 PC07-6 Contains 9,0,, 4 PC0- Parrelogram Arm welded beam with F-F clevis ,45,45R, 5 KE Clevis Pin.Pin 5mm x 75mm 6 R Clip4 R Clip 4mm 4 Spring R Cip 7 HC3-959 Hydraulic Cylinder 3 x ext F-F Ag cylinder with extension tube Sub with HC3-0 F-F Cylinder with extension tube and OC Valve 004- All Clevis Pin Pin 5mm x 75mm 9 S7-08 Adaptor - Ryco / BSP to 3/4 JIC M-M 0 PC5. Hydraulic hose mount ,45,45R, BOM85 Hose Mount Mounting Bolt 3 Bolt M8x5 Nyloc Nut M ,45,45R, BPK7B Electrical Plug Keeper Plastic Plug Holder R 3 60MZPHTF Plug Keeper Mounting Bolt M6x0 Hex Thread Forming Bolt R 4 RCDS-9 Clamp 4x RCD-9J x RCD-3PT x RCD-3BS x RCD-3BH x RCD-PS 004- All **5 EF0054SK Hydraulic Cylinder Seal Kit Suit Hydraulic Cylinder HC3-959 HC3-0 4

5 4 Drawbar frame Revision 06/0 5

6 Front A Frame Assembly Key Part No. Part Name Qty Description Serial No. Model PC-0 PC-0 PC45-0 PC40-0 PC30-0 PC0-8- PC Front A Frame Assembly Welded frame R Front Module Frame R 3 PC0-7- PC PC Chain Carrier 5x5x4.m beam 5x5x3.m beam 5x5x.63m beam R 45 45R 40 4 PC0-0 PC0-0- Chain Mount Arm Welded plate with swivel mount. sub with PC All 5 BOM00 NYLM0 BOM40 NYLM4 Swivel retaining bolt Bolt M0 x 0mm 0.9. Nyloc Nut M0 Bolt M4x0mm 0.9 M4 Nyloc Nut Sub. with Bolt M4x0mm 0.9 M4 Nyloc Nut PCHB-55 PCHB-553 Swivel Unit mm shaft swivel unit sub with PCHB All 7 PC83. PC83.3 Tie Plates 4 4 Side plates for joining swivel unit to chain. 36mm & PCHCL sub with PC **7 PC8 Tie Plates 4 Chain to Swivel All PCDCS55 PCDCS Bush 40xx55 steel bush. 40x5x steel bush sub with PCDCS 9 Chain Refer to Page 44 0 PC-0-5 Pivot Pin 35mm pin x 5mm WAHT38 Thrust Washer 3/8 Hardened Washer PIN C M0x63 Cotter Pin 3 M0 x 63mm Cotter Pin Sub with M3 x 63 Cotter pin 00- All 3 PCH4MCA Height Adjusting Chain 3mm chain assy with eye nut, M4x Cap Screw and M4 spring washer 70-5 BOM065 Drawbar pin retaining bolt Bolt M0 x 65mm Nyloc Nut M0 Sub with M x 65 Bolt and nyloc 00- All 6 BOM Front Module retaining bolts 8 8 Bolt M x mm Nyloc Nut M 4 PC0-3 Draw Bar Pivot Pin 38mm pin 440 grade PC0-7CL Chain Carrier Clamp used. 4 BOUM637 M6 Nyloc Nut PC84. Tie Plates PC0-7CL- Front Chain Carrier Clamp used 8 8 U Bolt M6xx7 M6 Nyloc Nut U Bolt M6x85x77 M6 zp Flat Washer PC ,45,, 8 BOUM07 M Frame retaining U bolt 4 8.U Bolt Mx07x04 Nyloc Nut M 40-9 PC0-8 Front M Frame Chain support. Transport mode RCD9 Hydraulic Hose mounting clamp 6 x RCD-9J x RCD-3PT x RCD-3BH BOM475 Front A Frame to Centre Frame mounting bolts Bolt M4 x75mm 8.8 Nyloc Nut M4 MK0 Parts Manual Container Plastic sealed container 3 60MZPHTF Manual container retaining bolts 3 M6x0 Hex Thread Forming Bolt 6

7 7 PC0-7CL- Front A-frame Assembly Revision 06/0 7

8 Centre Frame Key Part No. Part Name Qty Description Serial No. Model PC-0 PC45-0 PC45-0R PC40-0 PC40-0 PC R Axle90R8Std 90series 8 on 75 stub axle 90series 8 on /4 for US ** Axle70R6Std Stub Axle Assembly 70series 6 on 75 stub axle 70- ** AxleSH Stub Axle Assembly SAT 8 on 8 US.75 stub Sub with AxleSH ** AxleSH Stub Axle Assembly SAT 6 on stub Sub with AxleSH Centre Frame Welded main frame R 45R ** AxleKCT6S Stub Axle Assembly 4 SAT 6 on 5.5 TLCRstub Sub with AxleSh Sub with AxleSH BOM030 BOM0 Axle retaining bolt Bolt M0 x 30mm Bolt M0 x mm Nyloc Nut M All 4 PC Wing Pivot Pin 4 M35 x 30mm 5 BOM065 Wing Pivot Pin retaining bolt 4 Bolt M0 x 65mm 4 Nyloc Nut M0 Sub with M x 65 Bolt and nyloc 00- All 6 PIN C M0x63 Cotter Pin 4 M0 x 63mm cotter pin Sub with M3 x 63 cotter pin 00- All 7 PC Tail Pivot Pin 35mm x 75mm 8 HC436-9 HC HC HC Hydraulic Cylinder 4 4 Extended gland cylinder M rod end to F barrel end. with mm chain only / 45 45R 40 9 KE0 Cylinder pin retaining S Clip 5mm Spring Clip 0 WA FM35 Washer 8 35mm Flat Washer / Cylinder Pin 4 /4 x 0mm. 440 grade PCHSV Stage Sequence Valve Manifold with sequencing valves to control folding and unfolding 3 BOM040 Manifold retaining cap screw 3 33 Bolt M0 x 40mm Spring Washer M0 Flat Washer M R R 4 S90- Adaptor 3/4 JIC to 3/4 UNO M-M Nipple 5 S9- Elbow Adaptor 8 3/4 JIC to 3/4 UNO 90 M-M / Cylinder Pin 4 /4 x 6mm 7 RCD9 Hydraulic Hose Clamp 5 x RCD-9J x RCD-3PT x RCD-3BH **8 EF9SK Hydraulic Cylinder Seal Kit Suit Hydraulic Cylinder HC436-9 and HC **9 EF40SK Hydraulic Cylinder Seal Kit Suit Hydraulic Cylinder HC and HC R 8

9 Centre Frame Revision 06/0 9

10 Left Hand Inner Wing Key Part No. Part Name Qty Description Serial No. Model PC-05 PC-05 PC45-05 PC40-05 PC40-05 Left Hand Inner Wing Frame Welded frame R PC Wing Pivot Pin M35 x 30mm 3 BOM065 Wing pivot pin retaining bolt Bolt M0 x 65mm Nyloc Nut M0 Sub with M x 65 Bolt and nyloc 00-4 PIN C M0x63 Cotter Pin M0 x 63mm Cotter pin Sub with M3 x 63 Cotter pin 00-5 HC HC HC Hydraulic Cylinder 3.5x4 Ag cylinder F-F 3x4 Ag Cylinder F-F 4x4 Ag Cylinder F-F R Clevis Pin 4 5mmx75mm /4 x 94mm R Clip4 Cylinder pin retaining clip 4 R Clip 4mm 8 S9- Elbow adaptor 4 3/4JIC to 3/4UNO 90 M-M adaptor RCD9 Hydraulic Hose Clamp 4 x RCD-9J x RCD-3PT x RCD-3BH 0 MB35DX DX Bush 4 35x39xmm Bush 80- ** EF00SK Hydraulic Cylinder Seal Kit Suit Hydraulic Cylinder HC **3 EF0054SK Hydraulic Cylinder Seal Kit Suit Hydraulic Cylinder HC **4 EF036SK Hydraulic Cylinder Seal Kit Suit Hydraulic Cylinder HC

11 Left Hand Inner Wing Revision 06/0

12 Left Hand Outer Wing Key Part No. Part Name Qty Description Serial No. Model PC-07 PC45-07 PC45-07R PC40-07 PC40-07 Left Hand Outer Wing Welded Frame R PCHTA Chain Tension Adjustor.5 6 TPI Screw Assembly 3 PCHXK96S PCHK4553 Tension Spring Front Tension Spring Front Tension Spring 0mm coil spring 0mm coil spring 4mm coil spring 30-4 KE Male Spring Locator Polyurethane bush 5 KE Female Spring Locator Polyurethane bush 6 PC0-6 Left Hand Tension Arm **6 PC0-7 Right Hand Tension Arm 7 BOM440 NYLM4 Tension Arm Retaining Bolt Bolt M4 x 40mm 8.8 ZP Nyloc Nut M4 8 PC0-4 PC0-4- Left Hand Drop Leg sub. with PC08-4- All **8 PC0-5 PC0-5- Right Hand Drop Leg sub with PC08-5- All 9 PS5 Poly Spacer 5mm 4 Height Adjustor Spacers 5mmx 08x76 0 PS Poly Spacer mm Height Adjustor spacer x08x76 Spacer Clamp Screw All All BOM00 NYLM0 BOM40 NYLM4 Swivel Mount Bolt Bolt M0 x 0mm 0.9 Nyloc Nut M0 Bolt M4 x 0mm 0.9 Nyloc Nut M4 sub. with M4x0mm 0.9 Nyloc nut M4 0- All 3 PCHB-55 PCHB-553 Swivel Unit mm shaft swivel unit 55mm shaft swivel unit, sub. with PCHB All 4 PC83. PC83.3 Tie Plate 4 4 Plates for joining Disc Chain to Swivel. sub. with PC All **4 PC8 Tie Plate 4 Swivel All PCHDCS55 PCHDCS Disc Chain Spacer 40xx55mm bush 40x5x steel bush sub. with PCHDCS - All 6 Chain Refer to Page 44 7 Axle90R8Std Axle and wheel hub assembly 90 series 8on 75 stub axle 90 series 8on /4 for USA **7 Axle70R6Std 70 series 6 on 75 stub axle 70- **7 AxleSH SAT 8 on 8 US.75 stub Sub with AxleSh **7 AxleSH SAT 6 on stub Sub with AxleSh R 45R **7 AxleKCT6S SAT 6 on 5.5 TLCR stub Sub with AxleSH Sub with AxleSh All BOM030 BOM0 NYLM0 Axle retaining bolt Bolt M0 x 30mm 8.8ZP Bolt M0 x mm 8.8ZP Nyloc Nut M ,45 9 /8 BSP 45 deg. All 0 MB35DX DX bush 4 35x39xmm bush 80- All

13 Left Hand Outer Wing Revision 06/0 3

14 Right Hand Inner Wing Key Part No. Part Name Qty Description Serial No. Model PC-04 PC-04 PC45-04 PC45-04R PC40-04 Right Hand Inner Wing Welded Frame R 40 PC Wing Pivot Pin 35mm x 30mm 3 BOM065 Wing Pin Retaining Bolt Bolt M0 x 65mm Nyloc Nut M0 Sub with M x 65 Bolt and nyloc 00-4 PIN C M0x63 Cotter Pin M0 x 63mm Cotter Pin Sub with M3 x 63 Cotter pin 00-5 HC HC Hydraulic Cylinder Ag Cylinder F - F 3 / x 4 Ag Cylinder F - F 3 x Clevis Pin 4 5mm x 75mm 7 R Clip4 Clevis Pin retaining clip 4 R Clip 4mm 8 S9- Elbow Adaptor 4 3/4 JIC - 3/4 UNO 90 deg M-M 9 RCD9 Hydraulic Hose Mount 6 x RCD-9J x RCD-3PT x RCD-3BH 0 /8 BSP 45 deg MB35DX DX Bush 4 35x39xmm Bush 80- ** EF00SK Hydraulic Cylinder Seal Kit Suit Hydraulic Cylinder HC **3 EF0054SK Hydraulic Cylinder Seal Kit Suit Hydraulic Cylinder HC **4 BOM Wing post mounting bolt 6 6 Bolt Mxmm Nyloc Nut M R 4

15 Right Hand Inner Wing Revision 06/0 5

16 Right Hand Outer Wing Key Part No. Part Name Qty Description Serial No. Model PC-06 PC45-06 PC45-06R PC40-06 Right Hand Outer Wing Welded Frame R 40 PCHTA Chain Tension Adjuster See Page 36-3 PCHXK96S PCHK4553 Tension Spring Front Tension Spring Front Tension Spring 0mm Coil spring 0mm Coil spring 4mm Coil Spring KE Male Spring Locator Polyurethane bushing 5 KE Female Spring Locator Polyurethane bushing 6 PC0-6 Left Hand Tension Arm **6 PC0-7 Right Hand Tension Arm 7 BOM440 Tension Arm Retaining Bolt Bolt M4 x 40mm 8.8 ZP Nyloc Nut M4 8 PC0-4 PC0-4- Left Hand Drop Leg sub. with PC08-4- **8 PC0-5 PC0-5- Right Hand Drop Leg sub with PC PS5 Height Adjusting Spacer 5mm 4 75 ID 08 OD Polyurethane Spacer Ring 0 Spacer Clamping Screw PS Height Adjusting Spacer mm 75 ID 08 OD Polyurethane Spacer Ring BOM00 BOM40 Swivel Retaining Bolt Bolt M0 x Nyloc Nut M0 Bolt M4 x Nyloc Nut M4 sub. with M4x0mm 0.9 Nyloc nut M4 3 PCHB-55 PCHB-553 Swivel Unit mm shaft swivel unit 55mm shaft swivel unit sub. with PCHB PC83. PC83.3 Tie Plate 4 4 Plates for joining Disc Chain to Swivel. sub. with PC **4 PC8 Tie Plate 4 Swivel Unit PCHDCS55 PCHDCS Disc Chain Spacer 40 OD ID x 55mm Bush 40x5x steel bush, sub. with PCHDCS 6 Chain Refer to Page 44 7 Axle90R8Std Stub Axle and Wheel Hub Assembly 90series 8on 75 stub axle 90series 8 on /4 for USA 90- **7 Axle70R6Std 70 series 6 on.75 stub 70- **7 AxleSH SAT 8 on 8 US stub Sub AxleSh **7 AxleSH SAT 6 on stub Sub AxleSh R 45R **7 AxleKCT6S SAT 6 on 5.5 TLCR stub Sub with AxleSH Sub with AxleSh BOM030 BOM0 NYLM0 Axle retaining bolt Bolt M0 x 30mm 8.8 ZP Bolt M0 x mm 8.8 ZP Nyloc Nut M /8 BSP 45 deg MB35DX DX Bush 4 35x39xmm Bush 80-6

17 Right Hand Outer Wing Revision 06/0 7

18 Rear A Frame (Pg.) Key Part No. Part Name Qty Description Serial No. Model PC-03 PC-03 PC45-03 PC40-03 PC30-03 Rear A Frame Rear A Frame 45 Rear A Frame 40 Rear A Frame 30 Rear A Frame Welded Frame PC0--70 PC0-- 70mm King pin and bearings mm King pin and bearings R KCT6S TLC Stub Axle/Hub 6 Stud Kelly Hub with screw cap Toyota Pattern R C class stub. Sub wit AxleK83T66S BOM690 Axle Retaining Bolt Bolt M6 x 90mm Nyloc Nut M6 5 Circlip05 Circlip90 External Circlip 05mm External Circlip 90mm Bearing retaining circlip Bearing retaining circlip R King pin bearing Plain Sperical Bearing Plain Sperical Bearing R KE KE Bearing Housing and Keeper Plate Bearing Housing and Keeper Plate Welded bearing housing 70mm Welded bearing housing mm R KE KE Dust Cap Dust Cap 70mm Polymer dust cap. mm Polymer dust cap R PCH0D Welded component with 3/8 6 Spline Female and laser cut disc. 0 BOM30 Bolt M x 30mm Spring Washer M Mxx5 Square Washer /4 UNF Straight PCH03B and bush 3 KE009 8mm x 6 coil 73mm long 4 BOM6 Bolt M6 xmm M6xx5 Square Washer 5 BOM6 Bolt M6 xmm Nyloc Nut M6 6 PIN C M0x63 Cotter Pin M0 x 63mm cotter pin Sub with M3 x 63 Cotter pin 00-7 BOM065 Tail Pin Retaining Bolt Bolt M0 x 65mm Sub with M x 65 Bolt and nyloc 00-8 PC Tail Frame Pin 35mm x 40mm 9 PC0-7- PC PC Chain Transport Carrier 5x5x4.m beam 5x5x3.m beam 5x5x.63m beam R 45 45R 40 0 BOUM6 Rear Chain Carrier Clamping U Bolts U Bolt M6xx7 Nyloc Nut M6 M6 ZP Flat Washer PC0-3- PC0-3- PC39. Rear Chain Carrier Pedestal Riser for mounting chain carrier R BOUM680 Lower Pedestal Mounting U Bolts 4 88 U Bolt M6x80x77 Nyloc Nut M6 M6 ZP Flat Washer 3 PC09-9 Rear M 3 Chain support - transport BOUM80 Rear M Mounting U Bolts 4 8 U Bolt Mx80x77 Nyloc Nut M 8

19 Rear A Frame (Pg.) Revision 06/0 9

20 Rear A Frame (Pg.) Key Part No. Part Name Qty Description Serial No. Model 5 BOUM55 Centre M Mounting U Bolts 4 U Bolt Mx55x77 Nyloc Nut M 80-6 PC0-9- PC Rear Module BOM6 Module Retaining Bolts 8 8 Bolt M6 x mm Nyloc Nut M6 8 RCD9 Hydraulic Hose Clamp 5 x RCD-9J x RCD-3PT x RCD-3BH 9 HC Hydraulic Cylinder Ag cylinder F-F 4 bore x Clevis Pin 5x75mm cylinder clevis pin 3 RClip4 Clevis Pin Retaining Clip R Clip 4mm 3 S9- Elbow Adaptor 3/4 JIC - 3/4 UNO 90 deg M-M 33 S88- Elbow 45 deg Adaptor 3/4 JIC - 3/4 UNO 45 deg M-M **34 EF036SK Hydraulic Cylinder Seal Kit Suit Hydraulic Cylinder HC

21 Rear A Frame (Pg.) Revision 06/0

22 Rear Tail Key Part No. Part Name Qty Description Serial No. Model PC0-0 Rear Tail Frame Welded Frame R PC-0-45 Tail Frame Adjusting Lug Adjustable cylinder mount N / Adjustor Nut / BSW WA S / / Spring Washer PC0-0 PC0-0- Chain Mount Arm Welded plate with swivel mount sub. with PC08-0- Sub with PC0- Sub with PC R 6 PC-0-5 Pivot Pin 35mm x 5mm 7 PIN C M0x63 Cotter Pin M0 x 63mm Cotter Pin Sub with M x 65 Bolt and nyloc 00- All 8 HTW38 Thrust Washer 3/8 Hardened Washer 9 PCH4MCA Height Adjustor Chain 3mm chain assembly with eye nut, M4x Cap Screw and M4 spring washer 0 PCHB-55 PCHB-553 Swivel Unit mm shaft swivel unit 55mm shaft swivel unit sub. with PCHB BOM00 NYLM0 BOM40 NYLM4 Swivel retaining bolt Nyloc Nut M0 Nyloc Nut M4 sub. with M4x0mm 0.9 Nyloc nut M PC83. PC83.3 Tie Plate 4 4 Side plates for joining swivel unit to chain. 36mm & PCHCL sub. with PC ** PC8 Tie Plate 4 to Swivel PCDCS55 PCDCS Bush 40xx55mm steel bush 40x5xmm steel bush sub. with PCDCS 5 Chain Refer to Page 44 6 PC0-3 Sign Frame PC0-3-US R 7 PC-OS Metal Oversize Sign Australia Only 8 Sign Retaining Screws 0 9 BOM40 Frame Retaining Bolt 4 Nyloc Nut M 0 LED80RM Stop/Tail Lamp USA only R BOM65 Tail lamp retaining bolts Bolt M6x5 Nyloc nut M6 USA only R PC-SMV Slow Moving Vehicle Sign USA only R 3 60MZPHTF SMV sign retaining screws 4 M6x0 Hex Thread Forming Bolt R 4 PC0-00 Tail Leg A Rear Tail Leg Sub with A4 Rear tail leg 5 PC0-A Tail Leg Mount A Flexitor Sub with A4 Flexitor 6 PC8. Sub with PC8. 7 BOM85 Tail Leg Retaining Bolt Bolt M8x5mm grade 8.8 Plain nut M0, Spring washer M0 Sub with M0x30mm bolt nut and spring washer. 8 STB85 Flexitor Mounting Bolt M8x5 Self Tapping Bolt Sub with M0x35 Bolt and Nyloc nut

23 Rear Tail Revision 06/

24 Front Module Key Part No. Part Name Qty Description Serial No. Model PC0-8- PC Front Module Assembly 5x5mm Beam Assembly R HC56-4 Hydraulic Cylinder Ag cylinder. Female - Female / x 6 Side Ported - 3 RClip4 Cylinder Pin Reatining Clip 4mm R Clip Clevis pin 5mm x 75mm - 6 PCH4MCA Height Adjustor Chain 3mm chain welded assy with eye nut, M4x Cap Screw and M4 spring washer 5 PC0. Module Lift Arm PC Tension adjustor pivot pin 35mm x 755mm pin - 8 PC0-875B Tension Adjustor billet 75mm billet drilled to 36mm with lug WAHT38 Thrust Washer Hardened Flat Washer 3/8 0 9RAJ KE Clevis Pin 5mm x 75mm pin Cotter pin 4mm x mm -006 BOM065 Pin retaining bolt Bolt M0 x 65mm Nyloc Nut M0 Sub with M x 65 Bolt and nyloc 00- All 3 PC0- PC0-- Extended Chain Mount Arm Sub with PC0-03F (Page,5), sub. with PC08-- Sub with PC0-03F R 4 BOM00 NYLM0 BOM40 NYLM4 Swivel retaining bolt Bolt M0x0 0.9 Nyloc Nut M0 Bolt M4x0 0.9 Nyloc Nut M4 sub. with M4x0 0.9 Nyloc nut M PCHB-55 PCHB-553 Swivel Unit mm shaft swivel unit 55mm shaft swivel unit sub. with PCHB PC83. PC83.3 Tie Plate 4 4 Side plates for joining swivel unit to chain. 36mm & PCHCL sub. with PC **6 PC8 Tie Plate 4 to Swivel PCDCS55 PCDCS Bush 40xx55mm steel bush 40x5x steel bush. sub. with PCDCS 8 Chain Refer to Page 44 9 PC-0-5 Chain Mount Pivot Pin 35mm pin x 5mm long 0 PINCM063 Cotter Pin M0 x 63mm cotter pin Sub with M x 65 Bolt and nyloc 00- All S90- Adaptor 3/4JIC - 3/4UNO M-M RCD9 Hydraulic Hose Mount xrcd-3pt xrch-9j xrcd-3bh 3 PC0-0 PC0-0- PC0- Chain mount Arm Extended Chain Mount Arm sub. with PC CT machines only CT 45CT **4 EF0006SK Hydraulic Cylinder Seal Kit Suit Hydraulic Cylinder HC56-4 4

25 Front Module Revision 06/0 5

26 Rear Module Key Part No. Part Name Qty Description Serial No. Model PC07-9- PC Rear Module Assembly 5x5 welded beam assembly R HC56-4 Hydraulic Cylinder Hydraulic Cylinder / x 6 Side Ported. F - F - 3 RClip4 R Clip 4 4mm R Clip Clevis Pin 4 5mm x 75mm pin 6 PCH4MCA Height Adjustor Chain 3mm chain welded assy with eye nut, M4x Cap Screw and M4 spring washer 7 PC Tension Adjustor pivot pin 35mm x 755mm pin 8 PC07-875B Tension Adjustor billet 75mm billet drilled to 36mm with lug 5 PC0. Module Lift Arm WAHT38 Thrust Washer Hardened Flat Washer 3/8 0 9RAJ03 KE Clevis Pin 5mm x 75mm pin BOM065 Pin Retaining bolt Bolt M0 x 65 Nyloc Nut M0 Sub with M x 65 Bolt and nyloc 00-3 PC06- PC08-- Chain Mount Arm Sub with PC0-03R (Pg,5) sub. with PC08--6 Sub with PC0-03R R 4 BOM00 NYLM0 BOM40 NYLM4 Swivel Retaining bolt Bolt M0x0 0.9 Nyloc Nut M0 Bolt M0x0 0.9 Nyloc Nut M0 sub. with M4x0 0.9 Nyloc nut M4 5 PCHB-55 PCHB-553 Swivel Unit mm shaft swivel unit 55mm shaft swivel unit, sub.with PCHB PC83. PC83.3 Tie Plates 4 4 Side plates for joining swivel unit to chain. 36mm & PCHCL sub. with PC83.3 **6 PC8 Tie Plates 4 to Swivel PCDCS55 PCDCS Bush 40xX55mm spacer bush 40x5x steel bush. sub. with PCDCS 8 Chain Refer to Page 44 9 PC-0-5 Chain Mount Arm Pivot Pin 35mm pin x 5mm 0 PINCM063 Cotter Pin 0mm x 63mm Cotter Pin Sub with M x 65 Bolt and nyloc 00- S90- Adaptor 3/4JIC - 3/4UNO M-M RCD9 Hydraulic House Mount 4 xrcd-3pt XRCD-3BH XRCD-9J 3 PC08-33 PC PC06-0 Reducing Chain Mount Arm Chain Mount Arm sub. with PC CT machines only All 40CT 45CT 4 PC BOM NYLM Bolt M x Nyloc nut M 903- **6 EF0006SK Hydraulic Cylinder Seal Kit Suit Hydraulic Cylinder HC56-4 6

27 4 5 Rear Module Revision 06/0 7

28 90 Series Stub Axle - Machines Key Part No. Part Name Qty Description Serial No. Model D/CapSC D/CapLW Set Screw 4 M6 x.0 x /8 BSP Straight 4 D/Cap Dust Cap 90 Series Bolt On Dust Cap 5 PIN C M8x80 Cotter Pin M8 x 80 cotter pin 6 NCASTM45 Castle Nut M45 x slotted castle nut 7 WA FM34 Flat Washer 3/4 gr8 Flat washer 8 BE303 Bearing 303 (55x0x3.5) 9 WNutM0 Wheel Nut 8 M0 x.5 radiused WStudM0 Stud 8 M0 x.5 x Hub 90Series Drilled and studded Hub 8 stud 75 pcd 8 stud pcd for USA BE36 Bearing 36 (40x80x35.5) Wear Ring mm pressed steel ring Seal Triple Lip Seal 40x00x Seal Ring 80x00x ring 6 AXLETA90R 90 Square Stub Axle Titan Andy 90mm square stub axle. Machined and drilled for retaining bolt. **7 HUBTA90R Complete Hub Includes No Axle90R8Stud Stub Axle Assembly complete USA Stub Axle Assembly Includes No RIM438 Rim 4 x 3 8 Stud 75 PCD 6mm centre +9mm offset 8 stud pcd for USA Tyre6.5x4 Tyre BKT 6.5/85-4 PR 90-8

29 90 Series Stub Axle - Machines Revision 06/0 9

30 75 Series Stub Axle - Machines Key Part No. Part Name Qty Description Serial No. Model D/CapSC D/CapLW Set Screw 3 M8 x.5 x 30 3 M8 Spring Washer 3 /8 BSP Straight 4 D/Cap Dust Cap 75 Series Bolt On Dust Cap 5 PIN C M4x Cotter Pin M4 x cotter pin 6 NCASTM39 Castle Nut M39 x slotted castle nut 7 WA FM39 Flat Washer 39mm 8 BE30 Bearing 30 (x90x4.75) 9 WNutM8 Wheel Nut 6 M8 x.5 radiused WStudM8 Stud 6 M8 x.5 x Hub 75 Series Drilled and studed Hub 6 stud 05 pcd Seal Wear Ring mm pressed steel ring 3 BE33 Bearing 33 (65x0x3.75) Seal Triple Lip Seal 5x90x Seal Ring 65x90x ring 6 AXLETA70R 70 Round Stub Axle Titan Andy 70mm round stub axle. Drilled for retaining bolt. **7 HUBTA70R Complete Hub Includes No Axle75R6Stud Stub Axle Assembly complete Includes No RIM46 Rim 4 x 6 Stud 05 PCD Tyre5.5x4 Tyre 5.5/80-4 PR

31 75 Series Stub Axle - Machine Revision 06/0 3

32 SH Stub Axle - 30,40,45 (Up to 0/0/09) Key Part No. Part Name Qty Description Serial No. Model /8 BSP Straight D/Cap4T Dust Cap PIN C M4x Cotter pin M4 x cotter pin 4 NCAST Castle Nut UNF slotted castle nut 5 WA FM4 Flat Washer 4mm 6 BE3008X Bearing 3008X (40x68x9) 7 WNut34 Wheel Nut 6 3/4 UNF Radiused 8 WStud34 Stud 6 x3/4 UNF 9 H94605 Hub Drilled and studded bare hub 6 stud on 8.5 PCD 0 BE30XJ Bearing 30XJ (5x90x3) KEAP7M Seal sion seal. 75R4TKE Stub Axle 3/4 round x 4mm OA stub. 300mm x.75 machined rear spigot. **3 HB94605 Complete Hub Includes No. - 4 SH Stub Axle Assembly Complete Includes No Tyre.5/80x8 Tyre.5/ ply ribbed tyre Sub with 5.0/ ply ribbed tyre. 6 Rim0x8 Rim 8 x 0 6 Stud on 8.5 PCD Sub with 8 x3 6 Stud on 05 PCD SH Stub Axle - 30,40,45 (From 0/0/09) Key Part No. Part Name Qty Description Serial No. Model D/Cap6T Dust Cap 3 PIN C M5x40 Cotter pin M6 x cotter pin 4 NCAST4 Castle Nut M /4 slotted castle nut 5 WA FM30 Flat Washer M30 Flat Washer 6 BE330 Bearing WNut8 Wheel Nut 6 M8x.6 Radiused 8 WSM86 Stud 6 M8x.6x 9 H96605 Hub Drilled and studded bare hub 6 stud on 05 PCD 0 BE330 Bearing 330 KEAP7M Seal sion seal. 75R6TKE Stub Axle 3/4 round x 4mm OA stub. 300mm x.75 machined rear spigot. **3 HB96605 Complete Hub Includes No. - 4 SH Stub Axle Assembly Complete Includes No. - 5 Tyre5.0/70x8 Tyre 5.0/ ply ribbed tyre Rim8x3 Rim 8 x 3 6 Stud on 05 PCD

33 Revision 06/0 SH /SH Stub Axle - 30,40,45 Machines 33

34 SH Stub Axle - 30,40,45 USA (Up to 9/0/09) Key Part No. Part Name Qty Description Serial No. Model /8 BSP Straight D/Cap4T Dust Cap 90-45R 3 PIN C M4x Cotter pin M4 x cotter pin 4 NCAST Castle Nut UNF slotted castle nut 5 WA FM4 Flat Washer 4mm 6 BE3008X Bearing 3008X (40x68x9) 7 WNut34 Wheel Nut 8 3/4 UNF Radiused 8 WStud34 Stud 8 x3/4 UNF 9 H94880 Hub Drilled and studded bare hub 8 stud on 8 PCD 0 BE30XJ Bearing 30XJ (5x90x3) KEAP7M Seal sion seal. 75R4TKE Stub Axle 3/4 round x 4mm OA stub. 300mm x.75 machined rear spigot. **3 HB94880 Complete Hub Includes No. - 4 SH94880 Stub Axle Assembly Complete Includes No R 5 6.5/6.L Tyre R 6 Rim4x6. Rim 6. x 4 8 stud on 8 PCD R SH Stub Axle - 30,40,45 USA (From 9/0/09) Key Part No. Part Name Qty Description Serial No. Model D/Cap6T Dust Cap 3 PIN C M6x Cotter pin M6 x cotter pin 4 NCAST4 Castle Nut /4 slotted castle nut 5 WA FM30 Flat Washer M30 Flat Washer 6 BE330 Bearing WNut96 Wheel Nut 8 9/6 UNF 90deg taper 8 WStud96 Stud 8 9/6 UNF 9 H94880 Hub Drilled and studded bare hub 8 stud on 8 PCD 0 BE330 Bearing 330 KEAP7M Seal sion seal. 75R6TKE Stub Axle 3/4 round x 4mm OA stub. 300mm x.75 machined rear spigot. **3 HB96880 Complete Hub Includes No. - 4 SH96880 Stub Axle Assembly Complete Includes No R 5 6.5/6.L Tyre R 6 Rim4x6. Rim 6. x 4 8 stud on 8 PCD R 34

35 Revision 06/0 SH /SH Stub Axle - 30,40,45 USA Machines 35

36 KCT6S - 6 Stud Kelly Hub. Toyota Pattern 5 Wheels Up to 6//09 Key Part No. Part Name Qty Description Serial No. Model /4 UNF Straight D/Cap C Screw Dust Cap Screw in C Class Cast Aluminium cap witih Slot and grease nipple guard - 3 PIN C M4x30 Cotter Pin M4 x 30mm Cotter pin 4 NCAST78 Castle Nut 7/8 UNF Slotted Nut 5 WAF 7/8 Washer 7/8 Flat Washer 6 LM44649 Bearing 7 LM4460 Cone 8 NWH/ Wheel Nut 6 / UNF 9 WSTUD/ Wheel Stud 6 / x / UNF 0 HUBCKE Kelly C Class Hub T.L.C 6 Stud Drilled and Studded bare hub 6 stud on 5.5 PCD LM970 Cone LM9749 Bearing 3 Seal NAK7 Seal Multi Element NAK Seal.7 x.65 x.33 4 AxleR300 R Axle with Shield mm round stub axle with seal shield. Drilled for retaining bolt **5 HUBCKEC Kelly C Class Hub Complete. No KCT6S Stub Assembly with Kelly C Class Hub. No RIM5TLC Rim RIM 5 LC 6 Stud White 8 TYRE 3X0.5 Tyre TYRE 3X0.5R5 K83T66S - 6 Stud on 6 PCD Hub. L5 Wheels From 6//09 Key Part No. Part Name Qty Description Serial No. Model /4 UNF Straight D/Cap4T Dust Cap 3 PIN C M5x40 Cotter Pin M6 x mm Cotter pin 4 NCAS4 Castle Nut /4 UNF Slotted Nut 5 WAFM30 Washer 30m Flat Washer 6/7 300J Bearing Large bearing and cone 8 NWH/ Wheel Nut 6 / UNF 9 WSTUD/ Wheel Stud 6 / x / UNF 0 H836 Hub Drilled and Studded bare hub 6 stud on 6 PCD / LM9749/0 Bearing Sm bearing and cone 3 Seal 647 Seal seal.. 4 AxleK83TS.8 Axle with Shield.8mm round stub axle with seal shield. Drilled for retaining bolt **5 HB836 6 on 6 Hub Complete. No K83T66S 6 on 6 hub abd stub Stub Assembly No RIM85 Rim RIM 5 x8 6 on 6 PCD 8 TYRE L5 Tyre TYRE L5 Ribbed 36

37 Revision 06/0 KCT6S - 6 Stud Kelly Hub. Toyota Pattern 5 Wheels K83T66S - 6 Stud on 6 PCD Hub. L5 Wheels. 37

38 PCHB-55 Swivel Unit Key Part No. Part Name Qty Description Serial No. Model PCHB55H Housing Threaded Housing W/mm Shaft Drilled for 0mm Bolt PCHBS55 Shaft Stepped shaft 55 - mm Drilled for 0mm bolt 3 BE6 Bearing Sealed B Bearings 6 RS 4 TC5588 Seal TC 55 x 80 x 8 5 PCHB55C Outer Cap Threaded Cap and Bearing Retainer 6 PCHB55WA Washer - Shield Seal Protection Shield 7 PCHB-55 Chain Swivel Complete Rotating Union Includes No

39 PCHB-55 Swivel Unit Revision 06/0 39

40 PCHB-553 Swivel Unit Key Part No. Part Name Qty Description Serial No. Model PCHB553H Housing Threaded Housing W/mm Shaft Drilled for 4mm Bolt PCHBS553 Shaft Stepped shaft - 58mm Drilled for 4mm bolt 3 BE6 Bearing 3 Sealed b bearings 6 RS 4 TC5588 Seal TC 55 x 80 x 8 5 PCHB553C Outer Cap Threaded Cap and Bearing Retainer 6 PCHB553WA Washer - Shield Seal Protection Shield 7 PCHB-553 Chain Swivel Complete Rotating Union Includes No

41 PCHB-553 Swivel Unit Revision 06/0 4

42 Chain Tension Adjustor Key Part No. Part Name Qty Description Serial No. Model N /4LN Nut /4 WW - PCHTA-SB Steel spring retaining bush - 4 PCHXK96S PCHK4553 0mm Coil Spring 5mm Coil Spring Rear chains only. 5 KE Male Spring Locator Polyurethane bushing - 6 KE Female Spring Locator Polyurethane bushing PCHTA-N6 /4 ACME Thread Nut - 8 PCHTA-BC Tension Assembly Body with clevis 6 TPI 3 PCHTA-B6 Tension Bolt /4 Shaft WW - Acme 6 TPI KE Clevis Pin Pin 5mm x 75mm Cotter Pin M5 x 35mm PCHTA Chain Tension Adjustor Includes No

43 Chain Tension Adjustor Revision 06/0 43

44 Chain Key Part No. Part Name Qty Description Serial No. Model W36/5 36mm Disc Chain 8mm Curved Steel Plate on 36mm Chain CLA CL47/35 (USA) Moulded Disc 3 PCHDM mm Disc Chain mm Chain with Flat 0mm Discs 4 PCH Chain 44

45 3 4 Chain Revision 06/0 45

46 Decals Key Part No. Part Name Qty Description Serial No. Model PCHS Folding Instruction 3 PCHS3 Danger 4 PCHS4 Caution - Escaping High Pressure Fluid 5 PCHS5 Caution - Towing Speeds 6 PCHS6 Caution - Power Lines 8 PCHS8 6 9 PCHS9 4 0 PCHS0 PCHS PCHS Sm Kelly Engineering 3 4 PCHS3 Chain Tension 35mm 4 5 PCHSKDH## Kelly Diamond Harrow Decal **6 PCHSPP Patent Pending 45R 7 PCHSYRF 3 30mm x mm Yellow Class 8 PCHSRRF 4 30mm x mm Red Class 45R 45R 9 PCHS4 Hydraulic Flow 0 PCHS5 Chain Tension 330mm R PCHSDP Data Plate PCHSUSP USA Patent No. 45R 46

47 PCHS5 PCHS PCHSUSP PCHS PCHS3 PCHS4 PCHS8 PCHS9 PCHS0 PCHS PCHS6 PCHS4 PCHS5 PCHS3 PCHSYRF PCHSRRF PCHSDP PCHSKDH## Decals Revision 06/0 47

48 Hydraulic Sequence Valve Key Part No. Part Name Qty Description Serial No. Model 6887 Machined and ported aluminum valve Tail Cylinder Overcentre Valve SUN 3: Main Wing Overcentre valve SUN 3: 4 95 st Stage Folding Sequence Valve 5 95 nd Stage Folding Sequence Valve 6 95 st Stage Unfolding Sequence Valve 7 95 nd Stage Unfolding Sequence Valve Right Hand Outer Wing Overcentre Valve Left Hand Outer Wing Overcentre Valve SUN 3: SUN 3: 0 FR0-0F-0-N- M3 Flow Regulator Valve CV0-0-C-N- Non Return Valve FR0-0F-0-N- M Flow Regulator Valve 3 S90- Adaptor 3/4 JIC to 3/4 UNO M-M Nipple **4 PCHSV Stage Sequence Valve (Excludes No.3) Manifold with sequencing valves to control folding and unfolding 70-48

49 7 6 Hydraulic Sequence Valve Revision 06/0 49

50 Module Chain Tensioner Key Part No. Part Name Qty Description Serial No. Model PC0-03F Front Module Tension Pivot Body only PC0-03R Rear Module Tension Pivot Body only 3 N/4 /4 UNC Plain nut 4 WAHT/4 5 PC0-PCHTA-SB Steel spring retaining bush Steel bush 6 PCHXK96S Tension Spring 0mm Coil Spring 7 PC00-0-SL Rigid Spring Locator Polyurethane bush 8 PC Theaded /4 shaft with clevis 9 BOM0 M0 x Bolt M0 x 8.8 zp bolt 0 PC0-04 Module Tension Arm MB35DX 35ID x mm DX Bush 35x39xmm bush PC Bush 35 x x 0 steel bush 3 NYLM0 M0 Nyloc nut M0 Nyloc nut 4 KE Clevis Pin 5m x 75mm pin PC0-03FA Front Module Tension Assemby Complete assy containing - 4 PC0-03RA Rear Module Tension Assembly Complete assy containing - 4

51 4 3 PC0-03F PC0-03R Module Chain Tensioner Revision 06/