Wide Width. ECW9-1-20WH 7-5/16" [185 mm] 14-3/8" [365 mm] 7-13/16" [198 mm] 14-5/16" [363 mm] 17-7/16" [441 mm] 16" [406 mm] White 20 qt lbs.
|
|
|
- Clifton Miller
- 5 years ago
- Views:
Transcription
![eight epth Number of ins Units per eight per C10-1-35 9- [247 mm] 14-3/8" [365 mm] 9-7/8" [240 mm] 14-5/16" [363 mm] 18-15/16" [481 mm] 16" [406 mm] hite 35 qt. 1 1 6-1/2 lbs.](/docs-images/88/117222678/images/1-2.jpg "PMKT PMKT oor-mount racket Kits asy installation into handle mounting holes with only four screws Six-way adjustability for alignment of cabinet door with easy drop-in keyhole attachment Adapts from")
1 aste & Recycling Roll-ut and oor-mount racket Kits C Roll-ut aste & Recycling Non-Lidded ual orientation allows for installation in both narrow and wide applications Mounted on roller slides for easy accessibility ins and ardware: in styling is a welcome update to the industry-standard boxy look. ardware sits in bin grooves to hold it securely in place ptional lids available Mounting templates provided for easy installation Narrow Sliding Assembly ide RLL-UT AST & RCYCLIN/NN-LI C Narrow Assembled imensions ide inish Capacity [ardware/in] per in C /16" [185 mm] 14-3/8" [365 mm] 7-13/16" [198 mm] 14-5/16" [363 mm] 17-7/16" [441 mm] 16" [406 mm] hite 20 qt lbs. eight epth Number of ins Units per eight per C [247 mm] 14-3/8" [365 mm] 9-7/8" [240 mm] 14-5/16" [363 mm] 18-15/16" [481 mm] 16" [406 mm] hite 35 qt /2 lbs. PMKT PMKT oor-mount racket Kits asy installation into handle mounting holes with only four screws Six-way adjustability for alignment of cabinet door with easy drop-in keyhole attachment Adapts from standard width opening up to door sizes 3" wider KV co-riendly rosted Nickel finish or hite Allows for application with most common cabinet door overlays liminates need for sub-panel support behind cabinet door escription inish R-MUNT RACKT KITS Units Per eight Per PMKT* hite lbs. [1 kg.] PMKTPT* rosted Nickel lbs. [1 kg.] * Instructions and hardware included with all kits. Note: oor-mount Kit adds 3/8" to depth of aste & Recycle unit. 12 ownload at > Resource Library
![aste & Recycling ins and Lids Replacement ins & Lids INS imensions eight* epth inish escription Units per eight per QT20P- 14-1/4" [362 mm] 16" [406 mm] 7-1/4" [184 mm] hite 20 qt. 6 12 lbs. [5.4 kg.](/docs-images/88/117222678/images/2-0.jpg "] QT20P-PT 14-1/4\" [362 mm] 16\" [406 mm] 7-1/4\" [184 mm] Platinum 20 qt. 6 12 lbs. [5.4 kg.] QT27P- 10-5/8\" [270 mm] 17- [451 mm] 10-5/8\" [270 mm] hite 27 qt. 10 17.4 lbs. [7.9 kg.")
![] QT27P-PT 10-5/8" [270 mm] 17- [451 mm] 10-5/8" [270 mm] Platinum 27 qt. 10 17.4 lbs. [7.9 kg.] QT32P- 14" [356 mm] 20" [508 mm] 11- [298 mm] hite 32 qt. 1 4 lbs. [1.8 kg.](/docs-images/88/117222678/images/2-1.jpg "] QT35P- 14-1/4\" [362 mm] 17-1/2\" [445 mm] 9-3/16\" [233 mm] hite 35 qt. 6 14 lbs. [6.4 kg.] QT35P-PT 14-1/4\" [362 mm] 17-1/2\" [445 mm] 9-3/16\" [233 mm] Platinum 35 qt. 6 14 lbs. [6.4 kg.] QT50P- 15-3/8\" [391 mm] 21-3/8\" [542 mm] 11-1/8\" [283 mm] hite 50 qt.")
![8 20 lbs. [9.1 kg.] QT50P-P 15-3/8" [391 mm] 21-3/8" [542 mm] 11-1/8" [283 mm] Platinum 50 qt. 8 20 lbs. [9.1 kg.] LIS QT20L- 14-1/2" [368 mm] * 7-7/16" [189 mm] hite its 20 qt. 1 2 lbs. [0.9 kg.](/docs-images/88/117222678/images/2-2.jpg "] QT20L-PT 14-1/2\" [368 mm] * 7-7/16\" [189 mm] Platinum its 20 qt. 1 2 lbs. [0.9 kg.] QT35L- 14-1/2\" [368 mm] * 9-9/16\" [243 mm] hite its 35 qt. 1 2 lbs. [0.9 kg.] QT35L-PT 14-1/2\" [368 mm] * 9-9/16\" [243 mm] Platinum its 35 qt.")
![1 2 lbs. [0.9 kg.] * Lid adds to bin height.](/docs-images/88/117222678/images/2-3.jpg "Replacement in Chart PRUCT PRUCT PRUCT SC10-1-35 QT35P- PMTM145-1-50 QT50P- TSC15-1-35 QT35P- SC10-1-35PT QT35P-PT PMTM15-2-35 QT35P- TSC15-1-35PT QT35P-PT SC12-1-50 QT50P- PMTM175-2-35 QT35P-")
2 aste & Recycling ins and Lids Replacement ins & Lids INS imensions eight* epth inish escription Units per eight per QT20P- 14-1/4" [362 mm] 16" [406 mm] 7-1/4" [184 mm] hite 20 qt lbs. [5.4 kg.] QT20P-PT 14-1/4" [362 mm] 16" [406 mm] 7-1/4" [184 mm] Platinum 20 qt lbs. [5.4 kg.] QT27P- 10-5/8" [270 mm] 17- [451 mm] 10-5/8" [270 mm] hite 27 qt lbs. [7.9 kg.] QT27P-PT 10-5/8" [270 mm] 17- [451 mm] 10-5/8" [270 mm] Platinum 27 qt lbs. [7.9 kg.] QT32P- 14" [356 mm] 20" [508 mm] 11- [298 mm] hite 32 qt. 1 4 lbs. [1.8 kg.] QT35P- 14-1/4" [362 mm] 17-1/2" [445 mm] 9-3/16" [233 mm] hite 35 qt lbs. [6.4 kg.] QT35P-PT 14-1/4" [362 mm] 17-1/2" [445 mm] 9-3/16" [233 mm] Platinum 35 qt lbs. [6.4 kg.] QT50P- 15-3/8" [391 mm] 21-3/8" [542 mm] 11-1/8" [283 mm] hite 50 qt lbs. [9.1 kg.] QT50P-P 15-3/8" [391 mm] 21-3/8" [542 mm] 11-1/8" [283 mm] Platinum 50 qt lbs. [9.1 kg.] LIS QT20L- 14-1/2" [368 mm] * 7-7/16" [189 mm] hite its 20 qt. 1 2 lbs. [0.9 kg.] QT20L-PT 14-1/2" [368 mm] * 7-7/16" [189 mm] Platinum its 20 qt. 1 2 lbs. [0.9 kg.] QT35L- 14-1/2" [368 mm] * 9-9/16" [243 mm] hite its 35 qt. 1 2 lbs. [0.9 kg.] QT35L-PT 14-1/2" [368 mm] * 9-9/16" [243 mm] Platinum its 35 qt. 1 2 lbs. [0.9 kg.] * Lid adds to bin height. Replacement in Chart PRUCT PRUCT PRUCT SC QT35P- PMTM QT50P- TSC QT35P- SC PT QT35P-PT PMTM QT35P- TSC PT QT35P-PT SC QT50P- PMTM QT35P- TSC QT50P- SC PT QT50P-P PMTM QT35P- TSC PT QT50P-P SC QT27P- PMTM QT35P- TSC QT35P- SC PT QT27P-PT SM QT27P- TSC PT QT35P-PT SC QT20P- SM QT27P- TSC QT35P- SC PT QT20P-PT SM QT35P- TSC PT QT35P-PT SC QT20P- SM QT50P- USC QT35P- SC PT QT20P-PT SM QT20P- USC PT QT35P-PT SC QT35P- SM QT35P- USC QT50P- SC PT QT35P-PT SM QT20P- USC PT QT50P-PT SC QT20P- SM QT35P- USC QT27P- SC PT QT20P-PT SM QT20P- USC PT QT27P-PT SC QT27P- SM QT20P- USC QT35P- SC PT QT27P-PT RRC28K- QT32P- USC PT QT35P-PT SC9-1-20PT QT20P-PT RRC28PT- QT32P- USC QT50P- SC QT20P- TSC QT35P- USC PT QT50P-PT PMTM QT35P- TSC PT QT35P-PT PMTM QT35P- QT20P- (20 qt.) (shown with QT20L-) QT27P-PT (27 qt.) QT35P-PT (35 qt.) (shown with QT35L-PT lid) QT20P-PT (20 qt.) QT27P- (27 qt.) QT50P- (50 qt.) 14 ownload at > Resource Library
3 Cabinet imensions Cabinet imensions aste & Recycling Z Mounting CRNR RCYCLIN CNTRS RRC28K /16" [351 mm] 18-1/2" [470 mm] 3-15/16" [100 mm] 9-7/8" [251 mm] 12-1/8" [308 mm] Top/ottom RRC28PT /16" [351 mm] 18-1/2" [470 mm] 3-15/16" [100 mm] 9-7/8" [251 mm] 12-1/8" [308 mm] Top/ottom RRC28K- RRC28PT- (with door-mount hardware) = Radius = Min. Cabinet epth = Center of Rotation = Min. Cabinet pening Z 1-1/2" [38 mm] from behind face frame Z Min. Cabinet pening PIVT-UT AST & RCYCLIN INS (closed) (open) Minimum Interior Cabinet imensions eight* 1 eight* 2 epth 1 2 ront View rawer (open) Minimum Cabinet Clearances ack TM /16" [418 mm] 16-7/16" [418 mm] 19-1/2" [495 mm] 17- [451 mm] 13-1/2" [343 mm] Cabinet rame *1 represents minimum interior height with lid in fully open position. 2 represents minimum cabinet opening height with lid in fully open position. imensions shown are recommended minimum cabinet dimensions and clearances. Customer Service:
4 aste & Recycling Cabinet imensions Cabinet imensions Min. Cabinet pening Minimum Interior Cabinet imensions Minimum Cabinet Clearances eight* epth ront ack SINL IN UNITS NN-R-MUNT C /2" [368 mm] 7-1/2" [191 mm] 17-1/2" [444 mm] 16" [406 mm] 1/4" [6 mm] 1/8" [3 mm] C /2" [368 mm] 10" [254 mm] 19" [482 mm] 16" [406 mm] 1/4" [6 mm] 1/8" [3 mm] SC9-1-20PT 9" [229 mm] 9" [229 mm] 17-13/16" [452 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SC " [229 mm] 9" [229 mm] 17-13/16" [452 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SC PT 10" [254 mm] 10" [254 mm] 19-5/16" [491 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SC " [254 mm] 10" [254 mm] 19-5/16" [491 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SC PT 12" [305 mm] 12" [305 mm] 23-3/8" [594 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SC " [305 mm] 12" [305 mm] 23-3/8" [594 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SC PT 15" [381 mm] 15" [381 mm] 17-13/16" [452 mm] 16" [407 mm] 1/4" [6 mm] 1/8" [3 mm] SC " [381 mm] 15" [381 mm] 17-13/16" [452 mm] 16" [407 mm] 1/4" [6 mm] 1/8" [3 mm] SM " [229 mm] 9" [229 mm] 17-13/16" [452 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SM " [254 mm] 10" [254 mm] 19-5/16" [491 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SM " [305 mm] 12" [305 mm] 23-3/8" [594 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SM " [381 mm] 15" [381 mm] 17-13/16" [452 mm] 16-3/8" [416 mm] 1/4" [6 mm] 1/8" [3 mm] SM " [381 mm] 15" [381 mm] 19-5/16" [491 mm] 16-3/8" [416 mm] 1/4" [6 mm] 1/8" [3 mm] R-MUNT (TTM-MUNT) " [305 mm] 12" [305 mm] 12-1/8" [308 mm] 7-1/2" [191 mm] 1/8" [3 mm] USC PT 11- [298 mm] 11- [298 mm] 19-1/2" [241 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC [298 mm] 11- [298 mm] 19-1/2" [241 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC PT 11- [298 mm] 11- [298 mm] 23-1/2" [597 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC [298 mm] 11- [298 mm] 23-1/2" [597 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC " [305 mm] 12" [305 mm] 19-3/16" [487 mm] 22-5/8" [575 mm] 1/8" [3 mm] USC PT 12" [305 mm] 12" [305 mm] 19-3/16" [487 mm] 22-5/8" [575 mm] 1/8" [3 mm] USC " [305 mm] 12" [305 mm] 23-5/16" [592 mm] 22-5/8" [575 mm] 1/8" [3 mm] USC PT 12" [305 mm] 12" [305 mm] 23-5/16" [592 mm] 22-5/8" [575 mm] 1/8" [3 mm] R-MUNT (TP-MUNT) PMTM /2" [292 mm] 11-1/2" [292 mm] 18" [457 mm] 22-1/2" [572 mm] 1/8" [3 mm] PMTM " [305 mm] 12" [305 mm] 18" [457 mm] 22-1/2" [572 mm] 1/8" [3 mm] PMTM /2" [368 mm] 14-1/2" [368 mm] 22-1/8" [562 mm] 22-1/2" [572 mm] 1/8" [3 mm] TSC /2" [292 mm] 11-1/2" [292 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC PT 11-1/2" [292 mm] 11-1/2" [292 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC /2" [368 mm] 14-1/2" [368 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC PT 14-1/2" [368 mm] 14-1/2" [368 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC /2" [368 mm] 14-1/2" [368 mm] 22-1/8" [562 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC PT 14-1/2" [368 mm] 14-1/2" [368 mm] 22-1/8" [562 mm] 23-3/8" [594 mm] 1/8" [3 mm] xample of ace rame Cabinet Application * If using lid, add. imensions shown are recommended minimum cabinet dimensions and clearances. ront View rawer ace rame ace rame 16 ownload at > Resource Library
5 Cabinet imensions UL IN UNITS - NN-R-MUNT Min. Cabinet pening Minimum Cabinet imensions Minimum Cabinet Clearances eight* epth ront ack SC PT 12" [305 mm] 12" [305 mm] 19" [482 mm] 22-9/16 [573 mm] 1/8" [3 mm] SC " [305 mm] 12" [305 mm] 19" [482 mm] 22-9/16 [573 mm] 1/4" [6 mm] 1/8" [3 mm] SC PT 15" [381 mm] 15" [381 mm] 17-13/16" [452 mm] 20-3/8" [518 mm] 1/4" [6 mm] 1/8" [3 mm] SC " [381 mm] 15" [381 mm] 17-13/16" [452 mm] 20-3/8" [518 mm] 1/4" [6 mm] 1/8" [3 mm] SC PT 15" [381 mm] 15" [381 mm] 19-5/16" [491 mm] 23-3/8" [594 mm] 1/4" [6 mm] 1/8" [3 mm] SC " [381 mm] 15" [381 mm] 19-5/16" [491 mm] 23-3/8" [594 mm] 1/4" [6 mm] 1/8" [3 mm] SM " [305 mm] 12" [305 mm] 19" [482 mm] 22-9/16" [573 mm] 1/4" [6 mm] 1/8" [3 mm] SM " [381 mm] 15" [381 mm] 17-13/16" [452 mm] 20-3/8" [518 mm] 1/4" [6 mm] 1/8" [3 mm] SM " [381 mm] 15" [381 mm] 19-5/16" [491 mm] 22-3/8" [568 mm] 1/4" [6 mm] 1/8" [3 mm] R-MUNT (TTM-MUNT) USC PT 11-1/2" [292 mm] 11- [298 mm] 19- [502 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC /2" [292 mm] 11- [298 mm] 19- [502 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC PT 14-1/2" [368 mm] 14- [375 mm] 19-1/2" [502 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC /2" [368 mm] 14- [375 mm] 19-1/2" [502 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC PT 17" [432 mm] 17" [432 mm] 23-1/4" [591 mm] 22-9/16" [573 mm] 1/8" [3 mm] USC " [432 mm] 17" [432 mm] 23-1/4" [591 mm] 22-9/16" [573 mm] 1/8" [3 mm] USC PT 12" [305 mm] 12" [305 mm] 19-1/4" [489 mm] 22-9/16" [573 mm] 1/8" [3 mm] USC " [305 mm] 12" [305 mm] 19-1/4" [489 mm] 22-9/16" [573 mm] 1/8" [3 mm] USC " [381 mm] 15" [381 mm] 19-3/16" [487 mm] 22-5/8" [575 mm] 1/8" [3 mm] USC PT 15" [381 mm] 15" [381 mm] 19-3/16" [487 mm] 22-5/8" [575 mm] 1/8" [3 mm] USC " [406 mm] 15-5/8" [397 mm] 23-5/16" [592 mm] 22-5/8" [575 mm] 1/8" [3 mm] USC PT 16" [406 mm] 15-5/8" [397 mm] 23-5/16" [592 mm] 22-5/8" [575 mm] 1/8" [3 mm] R-MUNT (TP-MUNT) PMTM " [381 mm] 15" [381 mm] 18" [457 mm] 22-1/2" [572 mm] 1/8" [3 mm] PMTM /2" [445 mm] 17-1/2" [445 mm] 18" [457 mm] 22-1/2" [572 mm] 1/8" [3 mm] PMTM " [457 mm] 18" [457 mm] 18" [457 mm] 22-1/2" [572 mm] 1/8" [3 mm] PMTM " [533 mm] 21" [533 mm] 18" [457 mm] 22-1/2" [572 mm] 1/8" [3 mm] TSC " [381 mm] 15" [381 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC PT 15" [381 mm] 15" [381 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC /2" [445 mm] 17-1/2" [445 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC PT 17-1/2" [445 mm] 17-1/2" [445 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TRIPL IN UNITS - NN-R-MUNT SC PT 15" [381 mm] 15" [381 mm] 17-13/16" [452 mm] 23-3/8" [594 mm] 1/4" [6 mm] 1/8" [3 mm] SC " [381 mm] 15" [381 mm] 17-13/16" [452 mm] 23-3/8" [594 mm] 1/4" [6 mm] 1/8" [3 mm] SM " [381 mm] 15" [381 mm] 17-13/16" [452 mm] 23-3/8" [594 mm] 1/4" [6 mm] 1/8" [3 mm] UR IN UNITS - NN-R-MUNT SC PT 24" [610 mm] 24" [610 mm] 19-1/2" [495 mm] 22-5/8" [575 mm] 1/8" [3 mm] SC " [610 mm] 24" [610 mm] 19-1/2" [495 mm] 22-5/8" [594 mm] 1/4" [6 mm] 1/8" [3 mm] Cabinet imensions aste & Recycling SM " [610 mm] 24" [610 mm] 19-1/2" [495 mm] 23-3/8" [594 mm] 1/4" [6 mm] * If using lid, add. xample of rameless / uro-style Cabinet Application ront View rawer Cabinet rame Customer Service:
Pivot-out waste bin with self-opening and self-closing lid Clamping ring holds bags securely Works with most face frame & frameless cabinets
Corner Recycling Centers Three removable white polymer 32 qt. bins rotate on 1" diameter post esigned to fit in 36" base corner cabinet Specialty Series aste & Recycling Post eight Range RRC28K-: 28-1/2"
Home Storage & Organization. Kitchen Bath Closet
ome Storage & Organization Kitchen Bath Closet Contents aste & Recycling... 2 KV offers an extensive lineup, including several options for soft close, that maximizes cabinet space and helps keep kitchens
Waste & Recycling. A Solution for Every Kitchen
Waste & Recycling A Solution for Every Kitchen Waste & Recycling A complete offering with a total of seven product series, including four different levels of Soft-Close options. Each product has been designed
Specialty Storage. Wine Accessories...66 Spice Racks...67 Wire Accessories...68 Cabinet Dimensions Download at > Resource Library
Specialty Storage ine Accessories...66 Spice Racks...67 ire Accessories...68 Cabinet imensions...71 64 ownload at www.kv.com > Resource Library Specialty Storage Customer Service: 1.800.253.1561 65 Specialty
Pull-Out Systems. Wood & Wire...50 Wire...54 Specialty...59 Cabinet Dimensions Download at > Resource Library
Pull-Out ystems ood & ire...50 ire...54 pecialty...59 Cabinet imensions...62 48 ownload at www.kv.com > Resource Library Pull-Out ystems Customer ervice: 1.800.253.1561 49 Pull-Out ystems ood & ire Pot
Specialty Storage. Knape and Vogt s specialty storage line offers space saving solutions for every room, cabinet, and drawer in a home.
Specialty Storage Knape and Vogt s specialty storage line offers space saving solutions for every room, cabinet, and drawer in a home. 65 66 ine Accessories 67 Spice Racks 68 ire Accessories 71 Cabinet
Polymer Full-Round Lazy Susans
Polymer Full-Round Lazy Susans Wood Lazy Susans Lazy Susans Polymer construction with double wall rim and strengthening ribs Rim height is Standard pack includes shelves, one post, installation template
Type 12 / 13 Enclosures
Type 12 Free-Standing Enclosures ata Sheet pplication Houses electrical controls and instruments Easy access fixed or swing panels for optional equipment ual-access construction available for back-to-back
Monogram 36" Built-In Side-by-Side Refrigerator
Monogram 36" uilt-in Side-by-Side Refrigerator STION 1 LUSH INST INSTLLTION STION 2 STNR INSTLLTION 1/4" RM PNLS 3/4" OVRLY PNLS OVRLL IMNSIONS TR PNL INSTLL LUSH INST INSTLLTION 38" (96.5) 26" (66.0)
DODGE RAM PROMASTER AND PROMASTER CITY PRODUCT GUIDE
RM PROMSTR PROUT UI ontractor s hoice or Mobile Storage Solutions O RM PROMSTR N PROMSTR ITY PROUT UI -877-795-7733 Standard Shelving Kits odge Ram Promaster nd Promaster ity Kits W Shelves Included Included
Stock Wireless Program
ixture & Packaging Quality Store ixtures Shipping & Installations Nationwide! Hundreds of satisfied customers nationwide Stock Wireless Program I n n o v a t i v e S t y l i s h f f o r d a b l e Headquarters
Cabinet. Drawer. 19.1mm (0.75") 53.0(2.09) SLIDE TRAVEL ±4 SLIDE LENGTH ±1. Cabinet. Drawer. 4.6x9.5 Ø4.3 Ø
53.0(2.0) 1.1mm (0.75") 53.0(2.0) 1.1mm (0.75") S TRV ±4 S TRV ±4 S NT ±1 S NT ±1 53 1.1 53 1.1 35 30 10.6 12.6 12.7 10.6 12.6 12.7 12.6 35 12.6 4.6x.5 Ø6.4 4.6x.5 Ø6.4 M N 35 30 35 M N www.kingslide.com
training tables DAYS Product Type: Training Table, Top Series Name: Maverick with radius corners is MM, Arroyo with square corners is AR
Product Specifications How to Order ORKSURFACE UNITS 1. Product number: MM TR 24 60 3 ays and Lead Time 1 thick tops only, 2mm PVC edge-banding, pilot holes for post leg brackets only and metal inserts
PolySafe. Insulated wall mounting cabinets. Intro. Multipurpose polyester cabinets. Features. Standards. Approvals. Ambient conditions B.
Multipurpose polyester cabinets Standards eatures N/ 60529 N/ 61439-2 N/ 62208 N/ 62262 pprovals - abinets with one door: type 3, 3R, 3S, 4, 4, 12, 12K and 13 - abinets with two doors: type 3, 3R, 3S,
Single Socket and Horizontal Metering
G nergy onnections Single Socket and orizontal Metering T Approved Single Socket Metering T Approved Application Information G s Single Socket Metering products are designed for residential use. They are
GE Monogram 48" Built-In Side-by-Side Refrigerator
OVRLL IMNSIONS 25 1/2" (64.8) 48" (121.9) 23 7/8" (60.7) 1 3/4" (4.4) 13 1/2" (34.3) *84" (213.4) *83 1/2" (212.1) 68 1/2" (174.0) *72 1/4" (183.5) *40" (101.6) SPIITIONS Overall Width Overall Height Overall
Type 4 Panel Enclosures
Type 4 Lift-Off Cover ata Sheet Seamless poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing
TANDEM plus BLUMOTION 569H/569. installation instructions
TANDEM plus 569H/569. installation instructions inside Heavy duty full extension concealed runners Basic components Locking devices Runners New side adjustment New rear side adjustment Rotate side adjustment
MONOGRAM 36" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
STION 1 STNR 1/4" RM PNLS 3/4" OVRLY PNLS STION 2 LUSH INST OVRLL IMNSIONS STNR 25 1/2" (64.8) 36" (91.5) 23 7/8" (60.7) 1 3/4" (4.4) 13 1/2" (34.3) *84" (213.4) *83 1/2" (212.1) 68 1/2" (174.0) *72 1/4"
Hinges. Concealed hinges. Concealed hinge 90 opening
oncealed hinges oncealed hinge 90 opening Pins and links in 430 stainless steel Mounting features: - For nested doors or surface mounted doors. - LH or RH options. - For horizontal or vertical applications.
MONOGRAM 42" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
MONOGRM 42" UILT-IN SI-Y-SI RRIGRTOR STION 1 STNR INSTLLTION 1/4" RM PNLS 3/4" OVRLY PNLS STION 2 LUSH INST INSTLLTION STNR INSTLLTION 25 1/2" (64.8) 42" (106.7) 23 7/8" (60.7) 1 3/4" (4.4) 13 1/2" (34.3)
MONOGRAM 42" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
MONOGRM 42" UILT-IN SI-Y-SI RRIGRTOR STION 1 STNR INSTLLTION 1/4" RM PNLS 3/4" OVRLY PNLS STION 2 LUSH INST INSTLLTION MONOGRM 42" UILT-IN SI-Y-SI RRIGRTOR STNR INSTLLTION 25 1/2" (64.8) 42" (106.7) 23
Butt Contact Pushbutton Switches. Series 30 and 46 Snap-in Panel Mount
utt ontact Series 30 and 46 Snap-in Panel Mount TURS Sleek lack Matte ezel onvenient Snap-In ront Mount hoice of 6 utton olors SPST, SPT or PT ircuitry lternate ction, Positive eel and Overtravel Versions
MONOGRAM 36" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
MONOGRM 36" UILT-IN SI-Y-SI RRIGRTOR STION 1 STNR INSTLLTION 1/4" RM PNLS 3/4" OVRLY PNLS STION 2 LUSH INST INSTLLTION MONOGRM 36" UILT-IN SI-Y-SI RRIGRTOR OVRLL IMNSIONS STNR INSTLLTION 25 1/2" (64.8)
JENN-AIR DETAILED PLANNING DIMENSIONS 1 of 8
NN-R T PNNN MNSONS 1 of 8 36" NUTON OWNRT OOTOP WT TRON TOU ONTRO 4436S 36" x 7 9 16" x 21 11 32" PROUT MNSONS MO # 4436S Overall width 36 91.4 Overall depth 21 11 32 54.2 Width of recessed cooktop 34
VNA VNB SGC SGH VNC VNH VND VCC
Steam Valve VN Series Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable
Disconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494
Technical ata isconnect Switch and ircuit reaker Mechanism Specifications ulletin Number 1494 Topic Page 1494U isconnect Switch Specifications 2 1494, 1494F, 1494G, 1494R, 1494V isconnect Switch Specifications
Control and Automation
onsumer & ndustrial Power Protection ontrol and utomation or industrial applications.03 imagination at work Plug-in relays and uxiliary contactors Motor protection devices ontactors and Thermal overload
If you like the strong vertical lines of side-by-side
Side-by-Side Refrigerator Freezer Front venting allows unit to be completely built in Hermetically sealed refrigeration units Serial and model number plate Lighted electronic control panel Adjustable wire
Hinges Drawer Slides Drawer Systems Accessories
NÜVO Conceived and designed in Europe Hinges Drawer Slides Drawer Systems Accessories NÜVO A u g u s t 2 0 1 3 e d i t i o n LIFETIME WARRANTY HINGES NÜVO 8mm Dowels Screw-in S Self-Close 11 mm Ø 8 mm
2017 Product Specification Book. (Updated May 16th, 2017)
2017 Product Specification Book (Updated May 16th, 2017) 1 CFA Tips * ALL carcasses are plywood construction ~ STANAR! * ALL drawer boxes are ovetailed hard wood boxes (3/4" or 1/2") ~ STANAR! * ALL drawer
Bottom bracket. Part no. Details pg 57 Power supply set Z10NE03UG10. Part no. Details pg 56 Waste/recycle set Z10NA30UGUS
Bottom bracket Waste/recycle set Adapter plate Drive unit (pre-attached) Double bottom bracket (additional drive unit can be attached) 110v plug-in power supply with six foot cable Screw-on distance bumpers
Just six inches bigger than the Model 661, the Model
Side-by-Side Refrigerator / Freezer Front venting allows unit to be completely built in Hermetically sealed refrigeration units Serial and model number plate Lighted electronic control panel Adjustable
Shower commode chairs. Ocean. Series
Shower commode chairs Ocean Series Ocean Series Stable, stainless steel frame Individually adjustable seat height: no tools required Machine-washable adjustable backrest with quick-release buckles, can
This is the smallest combination refrigerator / freezer
Over-and-Under Refrigerator / Freezer Front venting allows unit to be completely built in Hermetically sealed refrigeration units Lighted electronic control panel Serial and model number plate Adjustable
Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const.
NXT NRATON lectronically nhanced Solenoid Valves rass and Stainless Steel odies 1/" - 2" NPT 2/2 3/2 /2 SRS eneration eatures ncrease in pressure ratings to A levels on all products (up to a 500% improvement)
Bulletin 1494F 30A, 60A, 100A Fixed-Depth Disconnect Switch (Cat 1494F-N30; 1494F-N60; 1494F-N100; Series C)
Installation Instructions ulletin 1494F, 60, Fixed-epth isconnect Switch (at 1494F-N30; 1494F-N60; 1494F-N100; Series ) WRNING: To prevent electrical shock, disconnect from power source before installing
BeSPACE Collection Lounge & Tables
esp ollection Lounge & Tables ffective November 15, 2017 Updated 1/16/2018 ONTNTS > are and Maintenance > Order hecklist > Pricing & Specs - lounge > Pricing & Specs - tables > Typicals SURNTUR. esp esp
General Applications. Axle Types. d20 leaf spring lbs. capacity Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
Type 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
Enclosure and Facility Design Guidelines for Recycling and Trash Removal Service. Santa Barbara, CA Updated November 2014
Enclosure and Facility Design Guidelines for Recycling and Trash Removal Service Santa Barbara, CA Updated November 2014 Front End Loading Containers Enclosures:. A. Enclosures should be designed with
General Applications. Axle Types D20 LEAF SPRING LBS. CAPACITY Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
General Applications. Axle Types D20 LEAF SPRING LBS. CAPACITY Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
General Applications. Axle Types. d72 leaf spring lbs. capacity Lbs. Capacity 12V
General Applications Axle Types 7200 Lbs. apacity omplete service manual Precision machined steel spindles and integral cast iron hub/drums Finned brake drums for better heat dissipation Press-in wheel
Steam Valve. Series VND. 2 Port Valve for Steam. With indicator (Option) By adopting of PTFE seal, the valve is suited for steam.
Steam Valve Series VN Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable
FR 9001 Aluminum Sliding System
R 9001 luminum Sliding System R 9001 SLID TYP: MOUNTING: Modular luminum Sliding System ottom Mount or Side Mount 50 WIDTH: 58 mm (2.28 in.) LOD PITY: dynamic up to 225 kg (500 lbs.) 68 55 5.5 5.5 MTRILS:
NAAMS Standards Compliant Power Clamp Cylinder ø50, ø63
NORMTON NMS Standards ompliant Power lamp ylinder ø5, ø6 Weight reduced by up to 8% luminum body with greatly reduced weight Suitable for robot material handling ore size KZ2N a New KZN-X2742 Reduction
KD Fittings. Product range:
K Fittings Product range: ll-threads rackets rass Heads ams & olts ross owels Flush Mounts Inserts Insex Screws Maxi Luna Fittings Modeez Fasteners Panel onnectors Screws Stretcher Plates Tee Nuts Unita
MIL Class M Series D*M D*MA connectors and crimp contacts
eatures/enefits *M (Removable crimp contacts technology) : QPL listed 24308 class M onnectors *M (Solder bucket) : QPL listed 24308 class M onnectors *M (90 P) : QPL listed 24308 class M onnec tors Non-Magnetic
Dispenser Specifications 22 Side Panels 23 Dual Installations 24 Accessories 31 Full-Scale Templates 32
UILT-IN DESIGN GUIDE Contents uilt-in Design Options 4 Model Specifications 6 Planning Information 9 Overlay Panels 12 Flush Inset Panels 26 Dispenser Specifications 22 Side Panels 23 Dual Installations
METAL. consumer UNITS DOMESTIC CIRCUIT PROTECTION MANUFACTURED IN THE UK
METL consumer UNITS OMESTI IRUIT PROTETION MNUFTURE IN THE UK P O W E R E Y S P E I L I S T S eyond the regulations Legrand s new range of metal consumer units does much more than meet the requirements
Concealed hinges. Premium hinge systems for cabinet doors. blum.com
Concealed hinges Premium hinge systems for cabinet doors blum.com Quick reference Simple planning and ordering lum offers many on-line tools to help you with your kitchen planning and ordering. Planning
Big & Tall OBUScomfort XL: Product map For users of above average Height or Weight
Model Number escription Grade Price COM imensions Seat eight eight Volume YG IN IN LB FT M MM MM KG M OBUSFORME COMFORT XL Seating CN OBUSFORME COMFORT XL 1 Choose Seat Size eep Seat Models (for longer
Wood/wide aluminum hardware set
AVENTOS HK Wood/wide aluminum hardware set Lift mechanism set Lift mechanism (qty 2) #7 x mm (-/8 ) wood screw (qty 0) Power factor Opening angle 4 99 07 20K200.N 00 74 07 20K200.N 7 49 07 20K2700.N 0
R100/R200 Series & VR100/VR200 Series Spiral Bevel Gear Drives
R100/R200 Series & R100/R200 Series Spiral evel ear rives R100/R200 R100/R200 oston R and R 100 and 200 Series Spiral evel ear oxes are available in four sizes with horsepowers ranging from 2.19 to 50.92.
Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive
Bulkhead Connections for Series B 1326 Cables
nstallation nstructions ulkhead onnections for Series ables atalog Numbers -U-, -U-L, -UT-L, -UT-, -P-, -P-L, -PT-L, -PT-, -P-, -P-L, -PT-L, -PT- bout This Publication This publication contains installation
Undercounter Refrigeration Design Guide
Undercounter Refrigeration Design Guide Contents 3 Undercounter Refrigeration 4 Specifications 6 Custom Panels 9 Full-Scale Template 10 Warranties Features and specifications are subject to change at any
INFORMATION SECTION. 2.3K - 3.5K Dexter Torflex Axles Assembly #10. Spring Axle Measurement. 4K - 6K Dexter Torflex Axles Assembly #11
STION INORMTION Spring xle Measurement 2K exter Sprung xles ssembly 3.5K exter Sprung xles ssembly 5.2K - 6K exter Sprung xles ssembly 7K exter Sprung xles ssembly 7.2K exter Sprung xles ssembly 8K exter
BODY COMPONENTS SECTION H. Fender Backs. Metal Slat. Fender Brackets. Roof Vent. Ramps & Rails. Replacement Dome. Ramp Assist Spring
OY OMPONNTS Metal Slat Roof Vent Fender acks Fender rackets ubs & xles Replacement ome Single xle Fenders Tandem xle, Straight Style Fenders Tandem Fender, Tear rop Style Square end Fenders Triple xle
Plate Cylinder Type C(L)KU32. HIGH type. with lock. LOW type (Small auto switch) LAll types with lock OHolds a workpiece during emergency stops.
in lamp ylinders INFORMTION ourtesy of M/Flodyne/ydradyne Motion ontrol ydraulic neumatic Electrical Mechanical (800) 426-5480 www.cmafh.com ompact ylinder Type (L)KQ32 Magnetic field resistant auto switch
Worm Gear Hand Winches Up to 4000 lb capacity
IO 900 ertified Worm Gear and Winches Up to 4000 lb capacity achine ut Worm Gears provide accurate operation and long lasting service. nclosed Oil ath provides continuous lubrication of gears to minimize
XT-Series & AT-Series Alternators Designed for Recreational Applications
XT-Series & AT-Series Alternators esigned for Recreational Applications 170A or 220A in a Small ase Package Up to 140A at dle Speeds Patented Smart Ready Technology (XT-Series Only) ual an ooling, igh
Installation Instructions - D-Series Warming Cabinet Instruction Door for Hinge UseReversal (Glass and Stainless Steel Doors)
Header Cam Lock Reversal... pg 1-4 Glass Door hinge reversal..... pg 5-9 Steel Door hinge reversal..... pg 10-13 Remove Panels Before reversing door hinges, the Header Cam Lock assembly must be reversed.
Undercounter Refrigeration Design Guide
Undercounter Refrigeration Design Guide Contents 3 Undercounter Refrigeration 4 Specifications 6 Custom Panels 9 Full-Scale Template 10 Warranties Features and specifications are subject to change at any
Sliding Door Fittings, Roller Shutters Folding Sliding Door Fittings
Silent Fold 20/A, door weight up to 20 kg Area of application: For folding doors mounted to the carcase on one side, without running and guide track, for opening and closing the folding doors without blocking
RETRACTED SIDE MINIMUM. 4 1/4 in. [108.0 mm] CP-493 HANGER (WITHOUT TRIGGER) RETRACTED SIDE CP-007 CLIP ACTIVATED SIDE MINIMUM. [108.
![RETRACTED SIDE MINIMUM. 4 1/4 in. [108.0 mm] CP-493 HANGER (WITHOUT TRIGGER) RETRACTED SIDE CP-007 CLIP ACTIVATED SIDE MINIMUM. [108.](/thumbs/88/116251221.jpg "RETRACTED SIDE MINIMUM. 4 1/4 in. [108.0 mm] CP-493 HANGER (WITHOUT TRIGGER) RETRACTED SIDE CP-007 CLIP ACTIVATED SIDE MINIMUM. [108.")
TYPE CC-NRB CATCH N CLOSE CROWDERFRAME POCKET DOOR KIT INSTRUCTION SHEET FOR NARROW DOORS 18 in [457 mm] TO LESS THAN 26 in [660 mm] WIDE ONLY ACTIVATED SIDE CC-493 HANGER (WITH TRIGGER) SEE RIGHT (COMPLETE
Ziva Collection Lounge and Tables
Ziva ollection Lounge and Tales ffective Novemer 15, 2017 Updated 1/16/2018 ONTNTS > Order hecklist - lounge > Pricing & Specs - lounge > Order hecklist - tales > Pricing & Specs - tales > Typicals SURNTUR.
Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const.
NXT NRATON lectronically nhanced Solenoid Valves rass and odies 1/" - 2" NPT 2/2 3/2 /2 eatures ncrease in pressure ratings to A levels on all products (up to a 500% improvement) Lower power operation
Wesco rubbish bin solutions & SERVO-DRIVE uno. Configuration & specification guide.
Wesco rubbish bin solutions & SERVO-DRIVE uno Configuration & specification guide www.blum.com Hands full? No problem... SERVO-DRIVE uno - the ultimate rubbish bin solution 2 - Content 4 Bottom mount bins
ALL ACCESS TRACKED AERIAL LIFTS
SS TR R TS 50 www.allaccessequipment.com info@allaccessequipment.com (978) 712-4950 UNQU TURS 50 orking eight 23 ateral Reach ost ompact 50 ift nly 11 4 ong nly 32 ide an fit in 10 levator xtraordinarily
Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Panel Series 79 Micro-rimp Section : Panel onnectors, rimp Termination Panel Plugs With Socket ontacts, rimp Termination, 790-027S 790-027S connectors are designed for rear-panel mounting and are supplied
DOOR STOPS & HOLDERS DOOR TRIM & ACCESSORIES DOME DOOR STOPS CONVEX & CONCAVE WALL STOPS WALL MOUNTED DOOR STOPS ORDERING EXAMPLE: -26D C200 SERIES
OOR STOPS & HOLRS OOR TRIM & SSORIS OM OOR STOPS 00 8 9 Mounting hardware included inish: satin chrome (6) MOL NUMR 00 8 9 MTRIL Zinc die-cast 6 5/6 (4) 5/6 (33) 7/6 (36.5) /6 (7) I 3/4 (44.5) 7/3 () 7/3
8091, X4 Pocket Door Slide
8091, 8092 4X4 Pocket Door Slide Number Mounting Action Load Rating Maximum Dimensions Clearance Finish Key Features 8091 Packaged Without Hinge or Hinge Base 8092 Packaged With Attached Hinge Base Side
Wedge Consoles Joining Kit Full Back Panel Side-Mount Panel Caster Kit Bulletin: P11. E mm/in
Spec-01204 OLI old Series esk Consoles esk Consoles and Accessories old Series esk Console, Type 12 ALICATIO The OLI old Series esk Console provides an ideal surface for mounting MI controls such as keyboards,
SECTION 14 - HINGES WDS
SION 14 - INS INS 14-1 to 14-3, Surface Mounted inges... 14-12 to 14-14, 14-23 to 14-24 Spring Released inges... 14-18 to 14-20 ift Off inges... 14-3 to 14-8, 14-11 orque inges... 14-21 xposed orner inges...
Broadway BROADWAY. Effective November 15, 2017
ffective November 15, 2017 Broadway BROAWAY esks 24 Modesty Panels 25 Returns and Bridges............ 34 redenzas 38 Overhead abinets 42 Back Panels and Tackboards 46 Tool Rail Accessories 54 TV Storage
SCISSORS ARM OPERATOR
AWNING 22 For the window design that requires a face-mounted operator, Truth has developed a special version of our Awning Roto Gear perator that incorporates the case from our 22 Series perators with
D*MA Standard Density Crimp Contact Cable Connector
annon rimp, Size 20 *M Standard ensity rimp ontact able onnector or contact cavity arrangements, see pages -44. or panel cutouts, see page -49. ngaging ace Shell Size ayout ual Through Hole loat Mount
L11 Fused and Non-Fused Disconnect Switches (30 & 60A) Dimensions are in millimeters (inches). Dimensions not intended for manufacturing purposes.
Series 11 used and Non-used isconnect Switches (30 & 60A) W A E H imension Approximate imensions in mm (in) Reference H W A ➊ E ➊ A1 108 (4-1/4) 120 (4-3/4) 101 (4) 90 (3-9/16) 105 (4-1/8) 85 (3-11/32)
High Density Network Rack Series
igh ensity Network Rack Series The NR system includes a full line of rack, cable management, power, and air flow accessories. NR provides an adjustable in-rack cable management, equipment mounting rails,
AVENTOS HS Wood/wide aluminum door application
AVENTOS HS Wood/wide aluminum door application Lift mechanism set Lift mechanism (qty 2) Cover plate (left and right) Symmetrical cover cap (qty 2) Arm assembly (left and right) Stabilizer rod adapter
SRB Series. UL Recognized CSA Certified VDE Approved* Specifications. SRB Series. Power Inlet Filters & Power Entry Modules
orcom Product Guide atalog: 161 Issue ate: 6.11 Minimum epth, ost-effective Shielded Power Inlet Filter SR Series UL Recognized S ertified V pproved* SRP SRS8 SR1 SR2 SR Series Smallest depth orcom RFI
Uses, Certifications, and Standards Electrical Control and Instruments, Indoor/Outdoor EXTERNAL FEET, WALL standard UL 508, CSA C22.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 121264CHC Encl 12X12X6 N4 Enclosure Cooper B-Line/Cable Tray Catalog Number Manufacturer escription Weight per unit Product
Type 4X Panel Enclosures
Type 4X Lift-Off Cover ata Sheet Seamless, poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
Quiet Cool Built-In 30 /36 W. All Refrigerator/All Freezer FDRB5301/5361, FDFB5301/5361 FDRB5301 FDRB5361 FDFB5301 FDFB5361 FDRB/FDFB5361
Quiet Cool Built-In 30 /36 W. All Refrigerator/All Freezer FDRB5301/5361, FDFB5301/5361 CUSTOM PANEL DIMENSIONS FDRB5301 FDRB5361 FDFB5301 FDFB5361 (1.9 cm) 29-1/4 (74.3 cm) (1.9 cm) 35-1/4 (89.5 cm) 75-
standard bodies single wheel
standard bodies single wheel odels odel pprox. Weight ab-toaxle hassis Steel lum. **78-SW 858# 7# Single rear wheels 0 **P78-SW 818# 50# Single rear wheels 0 98-SW 103# 563# Single rear wheels 56 * U98-SW
WARNING indicates a potentially hazardous situation which, if not avoided, could result in property damage, serious personal injury or even death.
Comfort Ride Third axle slipper leaf spring system (part numbers 2560-50, 2570-50 and 2580-50) and shock absorber system (part numbers 2450-50, 2460-50 and 2470-50) Installation Instructions All specifications
Polyester enclosures
Polyester enclosures Polyester enclosures 1 Features hemical-resistant Temperature-resistant Flame-retardant Use in Ex areas with a surface resistance < 10 9 Ω, black enclosure orrosion-proof Seawater-proof
Load Centers and Circuit Breakers
Midwest lectric Products Load enters and ircuit reakers MLM4020U TQL2140 TQL11202 TQL1115 TQL2120T Midwest Load enters pplication Information Midwest load centers lower your costs by making installation
441 SERIES POWER ADJUSTABLE DOOR CLOSERS
441 SRIS POWR JUSTL OOR LOSRS Non-handed djustable power range 1 to 6 Universal retrofit hole spacing actory preset to size 3 Power adjustable arm bracket Tri-pack for regular, parallel arm and top jamb
Selection Information Molded Case Circuit Breakers
Selection Information Molded ase ircuit reakers lass 500, 600, 800 100 rame 100 -rame IRUIT RKRS 3 ircuit reaker Type (240 V) H Hb H I Y Number of 1, 2, 3 1 2, 3 1 1 2, 3 2, 3 1 urrent Range 15 100 15
Drapery Track System. Lutron Drapery Track System Chassis Specification
rapery Track System 086123d 1 10.23.17 The Lutron drapery track utilizes the ultra-quiet, precision controlled Electronic rive Unit. It controls the movement of the drape, adjusting it to the user s desired
General Applications. Axle Types. D44, D52 & D60 leaf spring lbs. capacity Lbs. Capacity
General Applications Axle Types 300-000 Lbs. apacity omplete service manual Precision machined steel spindles and integral cast iron hub/drums Press-in wheel studs 0" x ¼" SA approved electric brakes "
Power Clamp Cylinder. Aluminum body reduces weight by up to 39% New CKZ3N63-135LT. 4.36kg
Power lamp ylinder ø, ø Weight reduced by up to luminum body reduces weight by up to 39% New KZ3N-135LT onventional model 39% 7.16kg 4.36kg Unclamping angle 15 as standard 15 angle shortens clamping time
ISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, 4 IO tandard ydraulic ylinder eries Nominal pressure a/ a
Glass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
4-DRAWER SERVICE CART
Operating Instructions and Parts Manual Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information,
600V, Non-Fusible, (3-Pole, 3 Phase)
0V, Non-Fusible, (3-Pole, 3 Phase) ulletin 1494G/1494GX1494GY Non Fusible 0 A switch ratings 0V: 3-pole, 3-phase and 6-pole, 3-phase versions versions only Type 3R/4/12 (painted metal), Type 4/4X (stainless
UPHOLSTERED BEDS & HEADBOARDS Office Use Only Code: Price:
UPHOLSTR S & HORS Office Use Only ode: Price: fully upholstered back eautifully mitered corners hand-crafted wood frame, individually and precisely fitted with fabric n adaptor kit for attaching headboards