Home Storage & Organization. Kitchen Bath Closet

Size: px
Start display at page:

Download "Home Storage & Organization. Kitchen Bath Closet"

Transcription

1 ome Storage & Organization Kitchen Bath Closet

2 Contents aste & Recycling... 2 KV offers an extensive lineup, including several options for soft close, that maximizes cabinet space and helps keep kitchens and bathrooms clean. Concealed hardware, multiple sizes and finishes plus optional bins and lids round out this complete product offering. Lazy Susans...18 Exceptional quality and durability define KV s wide selection of Lazy Susans. esigned to maximize corner cabinet functionality with ease of use in mind, they re available in a range of configurations and shelf type to complement any kitchen. rawer Inserts & Sink Front Trays These easy-to-install units in a variety of styles and finishes maximize organization and minimize the mess in the busiest rooms. rawer inserts organize tableware, cutlery, spices and more while sink front trays keep sinks and counters clutter free. Pull-Out Systems...48 KV's wide range of organizers, roll-outs, wire baskets and more is designed to maximize storage in the kitchen and bath. The collection of innovative under-cabinet storage solutions offers high quality functionality and performance to provide easy access to everyday items. Specialty Storage...64 Our ine Rack, Stemware older, Spice Rack, Towel Bar, Tray ividers and more put a finishing touch on the perfect kitchen, bath or laundry room. They re convenient, space-saving solutions for every room in the home. Closet Accessories...72 KV offers tubing, flanges, end caps, adjustable rods and tips for building the perfect closet. Care for and protect clothes, shoes and accessories, keeping everything organized and easy to access. Index...81 Company and Product Information...83 Customer Service:

3 aste & Recycling Features...4 Soft-Close, ood Undermount...6 Soft-Close, Undermount...7 Soft-Close Top-mount...8 Soft-Close, Bottom-mount...9 Standard, Top-mount...10 Standard, Bottom-mount...11 Roll-Out and oor-mount Bracket Kits...12 Specialty Series...13 Bins and Lids Cabinet imensions ownload at > Resource Library

4 aste & Recycling Customer Service:

5 aste & Recycling A complete offering with a total of seven product series, including four different levels of Soft-Close options. Each product has been designed to maximize usable cabinet interior and opening space, where two bins can often be used instead of only one. Multiple finish and size options fit all common cabinet opening sizes, making this one of the most extensive aste & Recycling programs available today. Soft-Close Technology Soft-Close slides now come standard on four KV aste & Recycling series products, making the world a quieter place by eliminating slamming and providing full closure every time. Concealed Slide ardware Product designs conceal slide hardware on all KV Soft-Close aste & Recycling products, creating a smooth, neutral look that is also easy to clean. Bins & Lids Bin styling is a welcome update to the industry-standard "boxy" look, plus it integrates effortlessly with hardware system for a secure fit. Optional lids conceal bin contents and hold plastic bags securely in place, now available for any 20 qt. or 35 qt. product. Eco-Friendly Finish KV Eco-Friendly, Frosted Nickel finish is compatible with the most popular nickel and stainless steel hardware and appliances, offering a soft and subtle alternative to chrome. A Better Fit All Around Features make installation faster and easier while also allowing individual products to be applied to a wider range of applications, door sizes and openings, creating a better fit all around. 4 ownload at > Resource Library

6 aste & Recycling See pages for recommended cabinet dimensions and clearances. See page 14 for bin and lid information. Customer Service:

7 aste & Recycling Soft-Close, ood Undermount eavy-uty, Soft-Close, ood Undermount aste & Recycling Bins eavy-duty, undermount slide with Soft-Close technology and concealed hardware; 100 lb. dynamic / 125 lb. static ood drawer box captures bin and provides a clean neutral look Single bin units include a storage space for trash bags or cleaning products Installs in minutes using self-aligning brackets secured with only six screws Unique, easy to clean, solid floor that prevents debris from falling through to the floor or inside cabinet Bins with optional lids USC See pages for recommended cabinet dimensions and clearances. See page 14 for bin & lid information. USC PT Sliding Assembly Assembled Product imensions idth S idth eight* epth * If using lid, add 3/4". 30 lbs. maximum per bin, not to exceed 80 lbs. total weight. Not intended for bulk storage. USC Finish Capacity per Bin Number of Bins Units per eight per SINGLE BIN UNITS USC /4" [286 mm] 11-1/4" [286 mm] 19-1/4" [489 mm] 22-3/8" [568 mm] hite 35 qt lbs. [8.9 kg.] USC PT 11-1/4" [286 mm] 11-1/4" [286 mm] 19-1/4" [489 mm] 22-3/8" [568 mm] Platinum 35 qt lbs. [8.9 kg.] USC /4" [286 mm] 11-1/4" [286 mm] 23-5/16" [592 mm] 22-3/8" [568 mm] hite 50 qt lbs. [8.9 kg.] USC PT 11-1/4" [286 mm] 11-1/4" [286 mm] 23-5/16" [592 mm] 22-3/8" [568 mm] Platinum 50 qt lbs. [8.9 kg.] OUBLE BIN UNITS USC /4" [286 mm] 11-5/8" [286 mm] 19-5/8" [498 mm] 22-3/8" [568 mm] hite 27 qt lbs. [9.5 kg.] USC PT 11-1/4" [286 mm] 11-5/8" [286 mm] 19-5/8" [498 mm] 22-3/8" [568 mm] Platinum 27 qt lbs. [9.5 kg.] USC /4" [362 mm] 14-5/8" [300 mm] 19-1/4" [489 mm] 22-3/8" [568 mm] hite 35 qt lbs. [10.7 kg.] USC PT 14-1/4" [362 mm] 14-5/8" [300 mm] 19-1/4" [489 mm] 22-3/8" [568 mm] Platinum 35 qt lbs. [10.7 kg.] USC /8" [429 mm] 16-7/8" [429 mm] 23-1/32" [592 mm] 22-7/16" [570 mm] hite 50 qt lbs. [10.9 kg.] USC PT 16-7/8" [429 mm] 16-7/8" [429 mm] 23-1/32" [592 mm] 22-7/16" [570 mm] Platinum 50 qt lbs. [10.9 kg.] S USC S 6 ownload at > Resource Library

8 USC PT (with custom rail accents) Soft-Close, Undermount aste & Recycling eavy-uty, Soft-Close, Undermount aste & Recycling Bins eavy-duty, undermount slide with Soft-Close technology; 100 lb. dynamic / 125 lb. static Installs in minutes using self-aligning brackets secured with only six screws Color coordinated aluminum side rails provide stability and conceal slide hardware Unique, easy to clean, solid backsplash and floor that prevents debris from falling through to floor or into cabinet ecorative rail accents can be customized to match countertops or cabinetry Bins with optional lids oor-mount Bracket Fits standard width opening up to door sizes 3" wider Simple, concealed two-screw door leveling Slotted screw holes allow for easy door centering Accommodates overlay or inset doors SINGLE BIN UNITS Sliding Assembly Assembled Product imensions idth S idth eight* epth Finish Capacity per Bin Number of Bins Units per eight per USC /16" [299 mm] 11-13/16" [299 mm] 19-3/16" [487 mm] 22-7/16" [570 mm] hite 35 qt lbs. [8.9 kg.] USC PT 11-13/16" [299 mm] 11-13/16" [299 mm] 19-3/16" [487 mm] 22-7/16" [570 mm] Platinum 35 qt lbs. [8.9 kg.] USC /16" [299 mm] 11-13/16" [299 mm] 23-1/4" [591 mm] 22-7/16" [570 mm] hite 50 qt lbs. [10 kg.] USC PT 11-13/16" [299 mm] 11-13/16" [299 mm] 23-1/4" [591 mm] 22-7/16" [570 mm] Platinum 50 qt lbs. [10 kg.] OUBLE BIN UNITS USC (with optional QT35LB- lid) USC /16" [300 mm] 11-13/16" [300 mm] 19-1/2" [496 mm] 22-7/16" [570 mm] hite 27 qt lbs. [9.5 kg.] USC PT 11-13/16" [300 mm] 11-13/16" [300 mm] 19-1/2" [496 mm] 22-7/16" [570 mm] Platinum 27 qt lbs. [9.5 kg.] USC /16" [376 mm] 14-13/16" [376 mm] 19-3/16" [487 mm] 22-7/16" [570 mm] hite 35 qt lbs. [10.7 kg.] USC PT 14-13/16" [376 mm] 14-13/16" [376 mm] 19-3/16" [487 mm] 22-7/16" [570 mm] Platinum 35 qt lbs. [10.7 kg.] USC /16" [376 mm] 15-3/8" [391mm] 23-1/4" [592mm] 22-7/16" [570 mm] hite 50 qt lbs. [10.9 kg.] USC PT 14-13/16" [376 mm] 15-3/8" [391mm] 23-1/4" [592mm] 22-7/16" [570 mm] Platinum 50 qt lbs. [10.9 kg.] * If using lid, add 3/4". 30 lbs. maximum per bin, not to exceed 80 lbs. total weight. Not intended for bulk storage. USC S USC S See pages for recommended cabinet dimensions and clearances. See page 14 for bin & lid information. Customer Service:

9 aste & Recycling Soft-Close, Top-mount TSC (with optional QT35LB- lid) Soft-Close, Top-Mount aste & Recycling Bins KV medium-duty, full-extension ball-bearing slides with Soft-Close technology and 1" over-travel oor-mount brackets include six-way adjustability for precise door alignment and easy installation Bins & optional Lids fit securely into multi-ply birch veneered plywood with soft radius edges Single-bin units feature a heavy-duty epoxy-coated wire accessory basket Color coordinated steel decorative slide hardware covers provide strength and stability while concealing slide hardware, creating a streamlined, easy-to-clean design Unique KV Face Frame Adapter Mounting ardware accommodates 1-3/4" face frame cabinets by allowing for installation in openings 1/2" smaller than standard sizes (excluding TSC PT and TSC ). See pages for recommended cabinet dimensions and clearances. See page 14 for bin & lid information. SINGLE BIN UNITS TSC PT Sliding Assembly Assembled Product imensions idth S idth eight* epth * If using lid, add 3/4". 30 lbs. maximum per bin, not to exceed 80 lbs. total weight. Not intended for bulk storage. TSC S Finish Capacity per Bin Number of Bins Units per eight per TSC /16" [287 mm] 11-1/2" [292 mm] 17-1/2" [445 mm] 23-3/16" [589 mm] hite 35 qt lbs. [6.3 kg.] TSC PT 11-5/16" [287 mm] 11-1/2" [292 mm] 17-1/2" [445 mm] 23-3/16" [589 mm] Platinum 35 qt lbs. [6.3 kg.] TSC /16" [364 mm] 14-1/2" [368 mm] 17-1/2" [445 mm] 23-3/16" [589 mm] hite 35 qt lbs. [6.7 kg.] TSC PT 14-5/16" [364 mm] 14-1/2" [368 mm] 17-1/2" [445 mm] 23-3/16" [589 mm] Platinum 35 qt lbs. [6.7 kg.] TSC /16" [364 mm] 14-1/2" [368 mm] 21-5/8" [549 mm] 23-3/16" [589 mm] hite 50 qt lbs. [7.1 kg.] TSC PT 14-5/16" [364 mm] 14-1/2" [368 mm] 21-5/8" [549 mm] 23-3/16" [589 mm] Platinum 50 qt lbs. [7.1 kg.] OUBLE BIN UNITS TSC /16" [376 mm] 15" [381 mm] 17-1/2" [445 mm] 23-3/16" [589 mm] hite 35 qt lbs. [6.8 kg.] TSC PT 14-13/16" [376 mm] 15" [381 mm] 17-1/2" [445 mm] 23-3/16" [589 mm] Platinum 35 qt lbs. [6.8 kg.] TSC /16" [440 mm] 17-1/2" [445 mm] 17-1/2" [445 mm] 23-3/16" [589 mm] hite 35 qt lbs. [7.1 kg.] TSC PT 17-5/16" [440 mm] 17-1/2" [445 mm] 17-1/2" [445 mm] 23-3/16" [589 mm] Platinum 35 qt lbs. [7.1 kg.] TSC S 8 ownload at > Resource Library

10 SCB (with optional PMKTPT oor Bracket Kit) Soft-Close, Bottom-Mount aste & Recycling Bins (door-mount optional) Soft-Close, Bottom-mount aste & Recycling KV medium-duty, full-extension ball-bearing slides with Soft-Close technology and 1" over-travel Clip-On andle KV Eco-Friendly Frosted Nickel finish or hite Easy installation with only four screws into heavy-duty mounting straps Optional oor-mount Bracket Specialized wire management systems hold Bins and optional Lids securely in place Bottom-mount units provide stability and are pre-assembled, for faster installation SCB PT (with optional QT-35-LP-PT Lid) SCB SCB SINGLE BIN UNITS Sliding Assembly Assembled Product imensions idth S idth eight* epth Finish [ardware/bin] Capacity per Bin * If using lid, add 3/4". ** Eco-Friendly. See page 4 for more information. 30 lbs. maximum per bin, not to exceed 80 lbs. total weight. Not intended for bulk storage. Number of Bins Units per eight per SCB9-1-20PT 8-3/8" [218 mm] 8-3/8" [213 mm] 17-5/16" [440 mm] 20-1/8" [511 mm] Frosted Nickel**/Platinum 20 qt lbs. [5.2 kg.] SCB /8" [218 mm] 8-3/8" [213 mm] 17-5/16" [440 mm] 20-1/8" [511 mm] hite/hite 20 qt lbs. [5.2 kg.] SCB PT 9-5/8" [244 mm] 9-5/8" [244 mm] 18-13/16" [478 mm] 20-1/8" [511 mm] Frosted Nickel**/Platinum 35 qt lbs. [4.8 kg.] SCB /8" [244 mm] 9-5/8" [244 mm] 18-13/16" [478 mm] 20-1/8" [511 mm] hite/hite 35 qt lbs. [4.8 kg.] SCB PT 11-3/8" [299 mm] 11-3/8" [299 mm] 22-7/8" [581 mm] 20-1/8" [511 mm] Frosted Nickel**/Platinum 50 qt lbs. [5.2 kg.] SCB /8" [299 mm] 11-3/8" [299 mm] 22-7/8" [581 mm] 20-1/8" [511 mm] hite/hite 50 qt lbs. [5.2 kg.] SCB PT 14-3/8" [365 mm] 14-3/8" [365 mm] 17-5/16" [440 mm] 16" [406 mm] Frosted Nickel**/Platinum 20 qt lbs. [4.9 kg.] SCB /8" [365 mm] 14-3/8" [365 mm] 17-5/16" [440 mm] 16" [406 mm] hite/hite 20 qt lbs. [4.9 kg.] OUBLE BIN UNITS SCB " [279 mm] 11-3/8" [299 mm] 18-3/4" [476 mm] 22" [558 mm] hite/hite 27 qt lbs. [6.4 kg.] SCB PT 11" [279 mm] 11-3/8" [299 mm] 18-3/4" [476 mm] 22" [558 mm] Frosted Nickel**/Platinum 27 qt lbs. [6.4 kg.] SCB PT 14-3/8" [365 mm] 14-3/8" [365 mm] 17-5/16" [440 mm] 20-1/8" [511 mm] Frosted Nickel**/Platinum 20 qt lbs. [8.2 kg.] SCB /8" [365 mm] 14-3/8" [365 mm] 17-5/16" [440 mm] 20-1/8" [511 mm] hite/hite 20 qt lbs. [8.2 kg.] SCB PT 14-3/8" [365 mm] 14-3/8" [365 mm] 18-13/16" [478 mm] 22" [558 mm] Frosted Nickel**/Platinum 35 qt lbs. [8.9 kg.] SCB /8" [365 mm] 14-3/8" [365 mm] 18-13/16" [478 mm] 22" [558 mm] hite/hite 35 qt lbs. [8.9 kg.] TRIPLE BIN UNITS SCB /8" [365 mm] 14-3/8" [365 mm] 17-9/16" [446 mm] 22" [558 mm] hite/hite 20 qt lbs. [7.8 kg.] SCB PT 14-3/8" [365 mm] 14-3/8" [365 mm] 17-9/16" [446 mm] 22" [558 mm] Frosted Nickel**/Platinum 20 qt lbs. [7.8 kg.] FOUR BIN UNITS SCB /8" [603 mm] 23-3/8" [603 mm] 19" [482 mm] 22" [558 mm] hite/hite 27 qt lbs. [8.5 kg.] SCB PT 23-3/8" [603 mm] 23-3/8" [603 mm] 19" [482 mm] 22" [558 mm] Frosted Nickel**/Platinum 27 qt lbs. [8.5 kg.] See pages for recommended cabinet dimensions and clearances. See page 14 for bin & lid information. Customer Service:

11 aste & Recycling Standard, Top-mount Standard, Top-Mount aste & Recycling Bins hite polymer removable Bins and optional Lids slide out on KV heavy-duty, precision ball-bearing slides oor-mount Brackets include six-way adjustability for precise door alignment and easy installation Made of multi-ply birch veneered plywood with soft radius edges for safety and comfort Single-bin units feature a heavy-duty, epoxy-coated wire accessory basket PMTM (with optional QT35LB- lid) See pages for recommended cabinet dimensions and clearances. See page 14 for bin and lid information. SINGLE BIN UNITS Assembled Product imensions Sliding Assembly idth S idth eight* epth Finish [ardware/bin] * If using lid, add 3/4". 30 lbs. maximum per bin, not to exceed 80 lbs. total weight. Not intended for bulk storage. Capacity per Bin Number of Bins Units per eight per PMTM /16" [278 mm] 11-1/2" [292 mm] 17-1/2" [445 mm] 22-1/2" [572 mm] Anochrome/hite 35 qt lbs. [5.7 kg.] PMTM /16" [291 mm] 12" [305 mm] 17-1/2" [445 mm] 22-1/2" [572 mm] Anochrome/hite 35 qt lbs. [5.9 kg.] PMTM /16" [354 mm] 14-1/2" [368 mm] 21-5/8" [549 mm] 22-1/2" [572 mm] Anochrome/hite 50 qt lbs. [6.6 kg.] OUBLE BIN UNITS PMTM PMTM PMTM PMTM /16" [367 mm] 15" [381 mm] 17-1/2" [445 mm] 22-1/2" [572 mm] Anochrome/hite 35 qt lbs. [6.4 kg.] PMTM /16" [430 mm] 17-1/2" [445 mm] 17-1/2" [445 mm] 22-1/2" [572 mm] Anochrome/hite 35 qt lbs. [7.1 kg.] PMTM /16" [443 mm] 18" [457 mm] 17-1/2" [445 mm] 22-1/2" [572 mm] Anochrome/hite 35 qt lbs. [7.2 kg.] PMTM /16" [519 mm] 21" [533 mm] 17-1/2" [445 mm] 22-1/2" [572 mm] Anochrome/hite 35 qt lbs. [7.5 kg.] S S 10 ownload at > Resource Library

12 SBM Standard, Bottom-Mount aste & Recycling Bins (door-mount optional) Standard, Bottom-mount aste & Recycling KV medium-duty ball-bearing precision slides Updated wire management system holds bins securely in place Pre-assembled units with heavy-duty mounting straps install easily with only four screws Clip-on handle comes single and double-bin units. Integrated handle on all triple and four bin units Optional oor-mount Bracket Optional lids available SINGLE BIN UNITS Assembled Product imensions Sliding Assembly idth S idth eight* epth * If using lid, add 3/4". 30 lbs. maximum per bin, not to exceed 80 lbs. total weight. Not intended for bulk storage. Finish Capacity per Bin Number of Bins Units per eight per SBM " [203 mm] 8" [203 mm] 17-5/16" [440 mm] 20-1/8" [511 mm] hite 20 qt lbs. [4.7 kg.] SBM /8" [244 mm] 9-5/8" [244 mm] 18-13/16" [478 mm] 20-1/8" [511 mm] hite 35 qt lbs. [4.3 kg.] SBM /8" [289 mm] 11-3/8" [289 mm] 22-7/8" [581 mm] 20-1/8" [511 mm] hite 50 qt lbs. [4.8 kg.] SBM /8" [365 mm] 14-3/8" [365 mm] 17-5/16" [440 mm] 16" [406 mm] hite 20 qt lbs. [4.2 kg.] SBM /8" [365 mm] 14-3/8" [365 mm] 18-3/4" [478 mm] 16" [406 mm] hite 35 qt lbs. [6.6 kg.] OUBLE BIN UNITS SBM /8" [289 mm] 11-3/8" [289 mm] 18-3/4" [476 mm] 22" [558 mm] hite 27 qt lbs. [5.9 kg.] SBM /8" [365 mm] 14-3/8" [365 mm] 17-5/16" [440 mm] 20-1/8" [511 mm] hite 20 qt lbs. [7.6 kg.] SBM /8" [365 mm] 14-3/8" [365 mm] 18-13/16" [478 mm] 22" [558 mm] hite 35 qt lbs [8.3 kg.] TRIPLE BIN UNITS SBM /8" [365 mm] 14-3/8" [365 mm] 17-9/16" [440 mm] 22" [558 mm] hite 20 qt lbs. [6.8 kg.] FOUR BIN UNITS SBM SBM SBM SBM /8" [594 mm] 23-3/8" [594 mm] 19" [483 mm] 22" [558 mm] hite 27 qt lbs. [8.3 kg.] S S See pages for recommended cabinet dimensions and clearances. See page 14 for bin and lid information. Customer Service:

13 aste & Recycling Roll-Out and oor-mount Bracket Kits EC Roll-Out aste & Recycling Non-Lidded ual orientation allows for installation in both narrow and wide applications Mounted on roller slides for easy accessibility Bins and ardware: Bin styling is a welcome update to the industry-standard boxy look. ardware sits in bin grooves to hold it securely in place Optional lids available Mounting templates provided for easy installation Sliding Assembly Narrow ide idth idth ROLL-OUT ASTE & RECYCLING/NON-LIE EC Narrow idth Assembled Product imensions ide eight idth Finish Capacity [ardware/bin] per Bin EC /16" [185 mm] 14-3/8" [365 mm] 7-13/16" [198 mm] 14-5/16" [363 mm] 17-7/16" [441 mm] 16" [406 mm] hite 20 qt lbs. epth Number of Bins Units per eight per See pages for recommended cabinet dimensions and clearances. See page 14 for bin and lid information. EC /4" [247 mm] 14-3/8" [365 mm] 9-7/8" [240 mm] 14-5/16" [363 mm] 18-15/16" [481 mm] 16" [406 mm] hite 35 qt /2 lbs. PMKT PMKT oor-mount Bracket Kits Easy installation into handle mounting holes with only four screws Six-way adjustability for alignment of cabinet door with easy drop-in keyhole attachment Adapts from standard width opening up to door sizes 3" wider KV Eco-Friendly Frosted Nickel finish or hite Allows for application with most common cabinet door overlays Eliminates need for sub-panel support behind cabinet door escription Finish OOR-MOUNT BRACKET KITS Units Per eight Per PMKT* hite lbs. [1 kg.] PMKTPT* Frosted Nickel lbs. [1 kg.] * Instructions and hardware included with all kits. Note: oor-mount Kit adds 3/8" to depth of aste & Recycle unit. 12 ownload at > Resource Library

14 Corner Recycling Centers Three removable white polymer 32 qt. bins rotate on 1" diameter post esigned to fit in 36" base corner cabinet Specialty Series aste & Recycling Post eight Range RRC28K-: 28-1/2" to 30-1/2" RRC28PT-: 25" to 33" Rotates 360 C A B RRC28K- Pivot-Out aste & Recyling Bin Pivot-out waste bin with self-opening and self-closing lid Clamping ring holds bags securely orks with most face frame & frameless cabinets RRC28PT- model includes hardware to mount to revolving cabinet door TM32- CORNER RECYCLING CENTER B975- iameter Assembled Product imensions A B C Finish [ardware/bin] Capacity per Bin Number of Bins Units per eight per RRC28K- 27-5/8" [702 mm] 18-5/16" [465 mm] 4-1/2" [114 mm] 3-3/16" [81 mm] Chrome/hite 32 qt lbs. [6.9 kg.] RRC28PT- 27-5/8" [702 mm] 18-5/16" [465 mm] 4-1/2" [114 mm] 3-3/16" [81 mm] Chrome/hite 32 qt lbs. [8.5 kg.] Assembled Product imensions* idth eight epth PIVOT-OUT ASTE & RECYCLING BIN Finish Capacity per Bin Number of Bins Units per eight per TM /2" [345 mm] 19-1/2" [495 mm]** 13" [332 mm] hite 32 qt lbs. [2.9 kg.] OOR-MOUNTE ASTE BIN oor-mounted aste Bin hite polymer removable bin mounts on hite frame Perfect for kitchens and baths Installs with two screws B /2" [241 mm] 13-3/8" [340 mm] 7" [178 mm] hite/hite 9 qt lbs. [0.8 kg.] See pages for recommended cabinet dimensions and clearances. See page 14 for bin and lid information. *Product dimensions include units in a fully-closed position, unless noted otherwise. **eight listed is when product is in an open position. Customer Service:

15 aste & Recycling Bins and Lids Replacement Bins & Lids BINS imensions idth eight** epth Finish escription Units per eight per QT20PB- 14-1/4" [362 mm] 16" [406 mm] 7-1/4" [184 mm] hite 20 qt lbs. [5.4 kg.] QT20PB-PT 14-1/4" [362 mm] 16" [406 mm] 7-1/4" [184 mm] Platinum 20 qt lbs. [5.4 kg.] QT27PB- 10-5/8" [270 mm] 17-3/4" [451 mm] 10-5/8" [270 mm] hite 27 qt lbs. [7.9 kg.] QT27PB-PT 10-5/8" [270 mm] 17-3/4" [451 mm] 10-5/8" [270 mm] Platinum 27 qt lbs. [7.9 kg.] QT32PB- 14" [356 mm] 20" [508 mm] 11-3/4" [298 mm] hite 32 qt. 1 4 lbs. [1.8 kg.] QT35PB- 14-1/4" [362 mm] 17-1/2" [445 mm] 9-3/16" [233 mm] hite 35 qt lbs. [6.4 kg.] QT35PB-PT 14-1/4" [362 mm] 17-1/2" [445 mm] 9-3/16" [233 mm] Platinum 35 qt lbs. [6.4 kg.] QT50PB- 15-3/8" [391 mm] 21-3/8" [542 mm] 11-1/8" [283 mm] hite 50 qt lbs. [9.1 kg.] QT50PB-P 15-3/8" [391 mm] 21-3/8" [542 mm] 11-1/8" [283 mm] Platinum 50 qt lbs. [9.1 kg.] QT60PB-* 19-1/8" [486 mm] 19-5/8" [498 mm] 13-7/8" [352 mm] hite 60 qt lbs. [9.0 kg.] LIS QT20LB- 14-1/2" [368 mm] ** 7-7/16" [189 mm] hite Fits 20 qt. 1 2 lbs. [0.9 kg.] QT20LB-PT 14-1/2" [368 mm] ** 7-7/16" [189 mm] Platinum Fits 20 qt. 1 2 lbs. [0.9 kg.] QT35LB- 14-1/2" [368 mm] ** 9-9/16" [243 mm] hite Fits 35 qt. 1 2 lbs. [0.9 kg.] QT35LB-PT 14-1/2" [368 mm] ** 9-9/16" [243 mm] Platinum Fits 35 qt. 1 2 lbs. [0.9 kg.] * Replacement bin for Roll-Out Plastic ampers (PS and PMS ). See page 60 for product information. ** Lid adds 3/4" to bin height. Replacement Bin Chart See pages for recommended cabinet dimensions and clearances. See page 14 for bin and lid information. PROUCT NUMBER: REPLACEMENT STOCK NUMBER: PROUCT NUMBER: REPLACEMENT STOCK NUMBER: PROUCT NUMBER: REPLACEMENT STOCK NUMBER: SCB QT35PB- PMTM QT50PB- TSC QT35PB- SCB PT QT35PB-PT PMTM QT35PB- TSC PT QT35PB-PT SCB QT50PB- PMTM QT35PB- TSC QT50PB- SCB PT QT50PB-P PMTM QT35PB- TSC PT QT50PB-P SCB QT27PB- PMTM QT35PB- TSC QT35PB- SCB PT QT27PB-PT SBM QT27PB- TSC PT QT35PB-PT SCB QT20PB- SBM QT27PB- TSC QT35PB- SCB PT QT20PB-PT SBM QT35PB- TSC PT QT35PB-PT SCB QT20PB- SBM QT50PB- USC QT35PB- SCB PT QT20PB-PT SBM QT20PB- USC PT QT35PB-PT SCB QT35PB- SBM QT35PB- USC QT50PB- SCB PT QT35PB-PT SBM QT20PB- USC PT QT50PB-PT SCB QT20PB- SBM QT35PB- USC QT27PB- SCB PT QT20PB-PT SBM QT20PB- USC PT QT27PB-PT SCB QT27PB- SBM QT20PB- USC QT35PB- SCB PT QT27PB-PT RRC28K- QT32PB- USC PT QT35PB-PT SCB9-1-20PT QT20PB-PT RRC28PT- QT32PB- USC QT50PB- SCB QT20PB- TSC QT35PB- USC PT QT50PB-PT PMTM QT35PB- TSC PT QT35PB-PT PMS QT60PB- PMTM QT35PB- PS QT60PB- QT20PB- (20 qt.) (shown with QT20LB-) QT27PB-PT (27 qt.) QT35PB-PT (35 qt.) (shown with QT35LB-PT lid) QT20PB-PT (20 qt.) QT27PB- (27 qt.) QT50PB- (50 qt.) 14 ownload at > Resource Library

16 Cabinet imensions Cabinet imensions aste & Recycling E F G Z Mounting CORNER RECYCLING CENTERS RRC28K /16" [351 mm] 18-1/2" [470 mm] 3-15/16" [100 mm] 9-7/8" [251 mm] 12-1/8" [308 mm] Top/Bottom RRC28PT /16" [351 mm] 18-1/2" [470 mm] 3-15/16" [100 mm] 9-7/8" [251 mm] 12-1/8" [308 mm] Top/Bottom RRC28K- 3/4" [19 mm] RRC28PT- (with door-mount hardware) 3/4" [19 mm] 3/4" [19 mm] 3/4" [19 mm] E F = Radius = Min. Cabinet epth E E G = Center of Rotation = Min. Cabinet Opening 3/4" [19 mm] Z 1-1/2" [38 mm] from behind face frame 3/4" [19 mm] Z F F G G B Min. Cabinet Opening idth O PIVOT-OUT ASTE & RECYCLING BINS Top View O Product (closed) Product (open) Minimum Interior Cabinet imensions idth eight* 1 eight* 2 epth 1 2 1/2" [13 mm] Front View rawer Product (open) Minimum Cabinet Clearances Back TM /16" [418 mm] 16-7/16" [418 mm] 19-1/2" [495 mm] 17-3/4" [451 mm] 13-1/2" [343 mm] 1/2" [13 mm] Cabinet Frame *1 represents minimum interior height with lid in fully open position. 2 represents minimum cabinet opening height with lid in fully open position. imensions shown are recommended minimum cabinet dimensions and clearances. B See pages for recommended cabinet dimensions and clearances. See page 14 for bin and lid information. Customer Service:

17 aste & Recycling Cabinet imensions Cabinet imensions Min. Cabinet Opening Minimum Interior Cabinet imensions Minimum Cabinet Clearances idth O idth eight* epth Front F Back B SINGLE BIN UNITS NON-OOR-MOUNT EC /2" [368 mm] 7-1/2" [191 mm] 17-1/2" [444 mm] 16" [406 mm] 1/4" [6 mm] 1/8" [3 mm] EC /2" [368 mm] 10" [254 mm] 19" [482 mm] 16" [406 mm] 1/4" [6 mm] 1/8" [3 mm] SCB9-1-20PT 9" [229 mm] 9" [229 mm] 17-13/16" [452 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SCB " [229 mm] 9" [229 mm] 17-13/16" [452 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SCB PT 10" [254 mm] 10" [254 mm] 19-5/16" [491 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SCB " [254 mm] 10" [254 mm] 19-5/16" [491 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SCB PT 12" [305 mm] 12" [305 mm] 23-3/8" [594 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SCB " [305 mm] 12" [305 mm] 23-3/8" [594 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SCB PT 15" [381 mm] 15" [381 mm] 17-13/16" [452 mm] 16" [407 mm] 1/4" [6 mm] 1/8" [3 mm] SCB " [381 mm] 15" [381 mm] 17-13/16" [452 mm] 16" [407 mm] 1/4" [6 mm] 1/8" [3 mm] SBM " [229 mm] 9" [229 mm] 17-13/16" [452 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SBM " [254 mm] 10" [254 mm] 19-5/16" [491 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SBM " [305 mm] 12" [305 mm] 23-3/8" [594 mm] 20-1/2" [521 mm] 1/4" [6 mm] 1/8" [3 mm] SBM " [381 mm] 15" [381 mm] 17-13/16" [452 mm] 16-3/8" [416 mm] 1/4" [6 mm] 1/8" [3 mm] SBM " [381 mm] 15" [381 mm] 19-5/16" [491 mm] 16-3/8" [416 mm] 1/4" [6 mm] 1/8" [3 mm] OOR-MOUNT (BOTTOM-MOUNT) B975-12" [305 mm] 12" [305 mm] 12-1/8" [308 mm] 7-1/2" [191 mm] 1/8" [3 mm] USC PT 11-3/4" [298 mm] 11-3/4" [298 mm] 19-1/2" [241 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC /4" [298 mm] 11-3/4" [298 mm] 19-1/2" [241 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC PT 11-3/4" [298 mm] 11-3/4" [298 mm] 23-1/2" [597 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC /4" [298 mm] 11-3/4" [298 mm] 23-1/2" [597 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC " [305 mm] 12" [305 mm] 19-3/16" [487 mm] 22-5/8" [575 mm] 1/8" [3 mm] USC PT 12" [305 mm] 12" [305 mm] 19-3/16" [487 mm] 22-5/8" [575 mm] 1/8" [3 mm] USC " [305 mm] 12" [305 mm] 23-5/16" [592 mm] 22-5/8" [575 mm] 1/8" [3 mm] USC PT 12" [305 mm] 12" [305 mm] 23-5/16" [592 mm] 22-5/8" [575 mm] 1/8" [3 mm] OOR-MOUNT (TOP-MOUNT) PMTM /2" [292 mm] 11-1/2" [292 mm] 18" [457 mm] 22-1/2" [572 mm] 1/8" [3 mm] PMTM " [305 mm] 12" [305 mm] 18" [457 mm] 22-1/2" [572 mm] 1/8" [3 mm] PMTM /2" [368 mm] 14-1/2" [368 mm] 22-1/8" [562 mm] 22-1/2" [572 mm] 1/8" [3 mm] TSC /2" [292 mm] 11-1/2" [292 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC PT 11-1/2" [292 mm] 11-1/2" [292 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC /2" [368 mm] 14-1/2" [368 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC PT 14-1/2" [368 mm] 14-1/2" [368 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC /2" [368 mm] 14-1/2" [368 mm] 22-1/8" [562 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC PT 14-1/2" [368 mm] 14-1/2" [368 mm] 22-1/8" [562 mm] 23-3/8" [594 mm] 1/8" [3 mm] Example of Face Frame Cabinet Application Top View 1/2" [13 mm] 1/2" [13 mm] * If using lid, add 3/4". imensions shown are recommended minimum cabinet dimensions and clearances. Front View B rawer Product 1/2" [13 mm] F Face Frame Product Face Frame O 16 ownload at > Resource Library

18 Cabinet imensions OUBLE BIN UNITS - NON-OOR-MOUNT Min. Cabinet Opening Minimum Cabinet imensions Minimum Cabinet Clearances idth O idth eight* epth Front F Back B SCB PT 12" [305 mm] 12" [305 mm] 19" [482 mm] 22-9/16 [573 mm] 1/8" [3 mm] SCB " [305 mm] 12" [305 mm] 19" [482 mm] 22-9/16 [573 mm] 1/4" [6 mm] 1/8" [3 mm] SCB PT 15" [381 mm] 15" [381 mm] 17-13/16" [452 mm] 20-3/8" [518 mm] 1/4" [6 mm] 1/8" [3 mm] SCB " [381 mm] 15" [381 mm] 17-13/16" [452 mm] 20-3/8" [518 mm] 1/4" [6 mm] 1/8" [3 mm] SCB PT 15" [381 mm] 15" [381 mm] 19-5/16" [491 mm] 23-3/8" [594 mm] 1/4" [6 mm] 1/8" [3 mm] SCB " [381 mm] 15" [381 mm] 19-5/16" [491 mm] 23-3/8" [594 mm] 1/4" [6 mm] 1/8" [3 mm] SBM " [305 mm] 12" [305 mm] 19" [482 mm] 22-9/16" [573 mm] 1/4" [6 mm] 1/8" [3 mm] SBM " [381 mm] 15" [381 mm] 17-13/16" [452 mm] 20-3/8" [518 mm] 1/4" [6 mm] 1/8" [3 mm] SBM " [381 mm] 15" [381 mm] 19-5/16" [491 mm] 22-3/8" [568 mm] 1/4" [6 mm] 1/8" [3 mm] OOR-MOUNT (BOTTOM-MOUNT) USC PT 11-1/2" [292 mm] 11-3/4" [298 mm] 19-3/4" [502 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC /2" [292 mm] 11-3/4" [298 mm] 19-3/4" [502 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC PT 14-1/2" [368 mm] 14-3/4" [375 mm] 19-1/2" [502 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC /2" [368 mm] 14-3/4" [375 mm] 19-1/2" [502 mm] 22-1/2" [597 mm] 1/8" [3 mm] USC PT 17" [432 mm] 17" [432 mm] 23-1/4" [591 mm] 22-9/16" [573 mm] 1/8" [3 mm] USC " [432 mm] 17" [432 mm] 23-1/4" [591 mm] 22-9/16" [573 mm] 1/8" [3 mm] USC PT 12" [305 mm] 12" [305 mm] 19-1/4" [489 mm] 22-9/16" [573 mm] 1/8" [3 mm] USC " [305 mm] 12" [305 mm] 19-1/4" [489 mm] 22-9/16" [573 mm] 1/8" [3 mm] USC " [381 mm] 15" [381 mm] 19-3/16" [487 mm] 22-5/8" [575 mm] 1/8" [3 mm] USC PT 15" [381 mm] 15" [381 mm] 19-3/16" [487 mm] 22-5/8" [575 mm] 1/8" [3 mm] USC " [406 mm] 15-5/8" [397 mm] 23-5/16" [592 mm] 22-5/8" [575 mm] 1/8" [3 mm] USC PT 16" [406 mm] 15-5/8" [397 mm] 23-5/16" [592 mm] 22-5/8" [575 mm] 1/8" [3 mm] OOR-MOUNT (TOP-MOUNT) PMTM " [381 mm] 15" [381 mm] 18" [457 mm] 22-1/2" [572 mm] 1/8" [3 mm] PMTM /2" [445 mm] 17-1/2" [445 mm] 18" [457 mm] 22-1/2" [572 mm] 1/8" [3 mm] PMTM " [457 mm] 18" [457 mm] 18" [457 mm] 22-1/2" [572 mm] 1/8" [3 mm] PMTM " [533 mm] 21" [533 mm] 18" [457 mm] 22-1/2" [572 mm] 1/8" [3 mm] TSC " [381 mm] 15" [381 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC PT 15" [381 mm] 15" [381 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC /2" [445 mm] 17-1/2" [445 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TSC PT 17-1/2" [445 mm] 17-1/2" [445 mm] 18" [457 mm] 23-3/8" [594 mm] 1/8" [3 mm] TRIPLE BIN UNITS - NON-OOR-MOUNT SCB PT 15" [381 mm] 15" [381 mm] 17-13/16" [452 mm] 23-3/8" [594 mm] 1/4" [6 mm] 1/8" [3 mm] SCB " [381 mm] 15" [381 mm] 17-13/16" [452 mm] 23-3/8" [594 mm] 1/4" [6 mm] 1/8" [3 mm] SBM " [381 mm] 15" [381 mm] 17-13/16" [452 mm] 23-3/8" [594 mm] 1/4" [6 mm] 1/8" [3 mm] FOUR BIN UNITS - NON-OOR-MOUNT SCB PT 24" [610 mm] 24" [610 mm] 19-1/2" [495 mm] 22-5/8" [575 mm] 1/8" [3 mm] SCB " [610 mm] 24" [610 mm] 19-1/2" [495 mm] 22-5/8" [594 mm] 1/4" [6 mm] 1/8" [3 mm] Cabinet imensions aste & Recycling SBM " [610 mm] 24" [610 mm] 19-1/2" [495 mm] 23-3/8" [594 mm] 1/4" [6 mm] 1/2" [13 mm] * If using lid, add 3/4". Example of Frameless / Euro-Style Cabinet Application B F Top View Product Front View rawer Product Cabinet Frame 1/2" [13 mm] See pages for recommended cabinet dimensions and clearances. See page 14 for bin and lid information. O 1/2" [13 mm] 1/2" [13 mm] Customer Service:

19 Lazy Susans ood Lazy Susans...20 Polymer Lazy Susans...21 ire Lazy Susans...25 Replacement Parts...27 Cabinet & Lip imensions...29 iagrams ownload at > Resource Library

20 aste & Recycling Customer Service:

21 Lazy Susans ood Lazy Susans ood Lazy Susan rawer Systems KV Eco-Friendly Frosted Nickel finish Two drawers slide out on KV Soft-Close undermount slides for easy access Unit pivots right or left to access four adjustable wood and wire baskets 1/2" thick, multi-ply shelf platforms with UV-cured clear coat finish 2 slide-out center shelves SS-K-28-FN Post eight Range 25" [635 mm] to 30" [762 mm] 4 adjustable side baskets (1" increments) Rotates 105 right or left C Kidney A B SS-FR-28-FN See Page 29 for available Cabinet and Shelf Lip imensions for the part numbers on this page. 20-1/4" 3-7/8" From bottom FULL-ROUN iameter Assembled Product imensions A B C Finish Units per eight per SS-FR-28-FN 28" [711 mm] Birch/Frosted Nickel** 1* 65.5 lbs. [29.7 kg.] KINEY-SAPE 3-7/8" 12-1/4" 23-1/2" 12-1/4" 3-7/8" From bottom of shelf 4-1/4" 6-1/2" 3-7/8" From bottom of shelf 27-1/2" 21" [533 mm] extension SS-FR-28-FN 20" [508 mm] extension SS-K-28-FN SS-K-28-FN 28-7/8" [733 mm] 20-15/16" [532 mm] 8" [203 mm] 5-11/16" [144 mm] Birch/Frosted Nickel** 1* 63 lbs. [28.6 kg.] *Product is shipped in two cartons. ** Eco-Friendly. See page 4 for more information. 20 ownload at > Resource Library

22 Polymer Full-Round Lazy Susans ood Lazy Susans Lazy Susans Polymer construction with double wall rim and strengthening ribs Rim height is 1" Standard pack includes shelves, one post, installation template and hardware Independently rotating shelves 2 Shelf & Bulk Packs 3 Shelf PFN28ST- Post eight Range 25-1/2" [647 mm] to 31-1/2" [800 mm] Post eight Range 35-1/2" [901 mm] to 40-1/4" [1,022 mm] STANAR PACK BULK PACK iameter FULL-ROUN Number of Shelves Number of Shelves PFN18ST- 2 PFN18S3T- 3 PFN20ST- 2 PFN20S3T- 3 PFN24ST- 2 PFN28ST- 2 PFN28SBT-* 10 PFN32ST- 2 18" [457.2 mm] 18" [457.2 mm] 20" [508 mm] 20" [508 mm] 24" [609.6 mm] 28" [711.2 mm] 32" [812.8 mm] * Bulk Packs include 25-1/2" [648 mm] 31-1/2" [800 mm] posts and hardware. See Page 29 for available Cabinet and Shelf Lip imensions for the part numbers on this page. A Minimum Cabinet Opening 5-3/4" [146 mm] 5-3/4" [146 mm] 6-3/4" [171 mm] 6-3/4" [171 mm] 8-1/4" [210 mm] 9-7/8" [251 mm] 11-1/2" [292 mm] eight Limit per Shelf 30 lbs. [13.6 kg.] 30 lbs. [13.6 kg.] 38 lbs. [17.1 kg.] 38 lbs. [17.1 kg.] 55 lbs. [24.9 kg.] 78 lbs. [35.4 kg.] 78 lbs. [35.4 kg.] Finish Units per hite 1 hite 1 hite 1 hite 1 hite 1 hite 1 hite 1 STANAR PACK eight 8.4 lbs. [3.8 kg.] 12.1 lbs. [5.5 kg.] 10.1 lbs. [4.6 kg.] 14.3 lbs. [6.5 kg.] 12.1 lbs. [5.5 kg.] 15.5 lbs. [7.0 kg.] 18.2 lbs. [8.3 kg.] Units per BULK PACK eight lbs. [33.8 kg.] See Page 29 for available Cabinet and Shelf Lip imensions for the part numbers on this page. Customer Service:

23 Lazy Susans Polymer Lazy Susans Polymer Kidney-Shaped Lazy Susans Polymer construction with double wall rim and strengthening ribs Rim height is 1" Standard pack includes shelves, one post, installation template and hardware Independently rotating shelves 2 Shelf & Bulk Packs PKN28ST- A B Kidney C Post eight Range 25-1/2" [647 mm] to 31-1/2" [800 mm] STANAR PACK BULK PACK iameter Assembled Product imensions Number of Shelves Number of Shelves A B C Minimum Cabinet Opening eight Limit per Shelf Finish STANAR PACK Units per eight Units per BULK PACK eight KINEY-SAPE PKN18ST- 2 18" [457 mm] 10-1/4" [260 mm] 1-1/4" [31 mm] 15/16" [24 mm] 23 lbs. [10.4 kg.] hite lbs. [3.6 kg.] PKN24ST- 2 PKN24SBT-* 10 24" [609 mm] 14-1/4" [362 mm] 2-1/4" [57 mm] 1-5/8" [40 mm] 45 lbs. [20.4 kg.] hite lbs. [4.5 kg.] lbs. [20.5 kg.] PKN28ST- 2 PKN28SBT-* 10 28" [711 mm] 18-1/4" [464 mm] 4-1/4" [107 mm] 3-1/16" [76 mm] 67 lbs. [30.4 kg.] hite 1 13 lbs. [5.9 kg.] lbs. [26.7 kg.] PKN32ST- 2 32" [812 mm] 22-1/4" [565 mm] 6-1/4" [158 mm] 4-7/16" [112 mm] 93 lbs. [42.2 kg.] hite 1 13 lbs. [5.9 kg.] * Bulk Packs include 25-1/2" [648 mm] 31-1/2" [800 mm] posts and hardware. See Page 29 for available Cabinet and Shelf Lip imensions for the part numbers on this page. 22 ownload at > Resource Library

24 Polymer -Shaped Lazy Susans Two shelf set for use in upper pantry cabinets Five shelf set for use in lower section of tall pantry cabinets or in 24" deep utility cabinets Independently rotating shelves Polymer Lazy Susans Lazy Susans A -Shape C B PN22ST- PN22S5T Post eight 55-15/16" [1,397 mm] to 61-5/16" [1,549 mm] PN22ST- Post eight 26-15/16" [660 mm] to 32-5/16" [813 mm] Number of Shelves iameter Assembled Product imensions A B C Finish Units per eight per POLYMER -SAPE LAZY SUSANS PN22ST- 2 22" [559 mm] 18-3/16" [462 mm] 7-3/16" [183 mm] PN22S5T- 5 22" [559 mm] 18-3/16" [462 mm] 7-3/16" [183 mm] 16-11/16" [424 mm] 16-11/16" [424 mm] hite lbs. [4.1 kg.] hite lbs. [9.4 kg.] Polymer oor-mount Lazy Susans Number of Shelves POLYMER OOR-MOUNT LAZY SUSANS PPN24S- 2 PPN28S- 2 iameter 24" [609 mm] 28" [711 mm] PPN28S- oors attach to Lazy Susan shelves for automatic shelf retrieval PPN24S Assembled Product imensions A B C Z 14-1/4" [362 mm] 18-1/4" [464 mm] 2-1/4" [57 mm] 4-1/4" [108 mm] 1-5/8" [41 mm] 3-1/16" [78 mm] 10-3/8" [264 mm] 10-15/16" [278 mm] Post eight 25" [635 mm] to 33" [838.2 mm] Finish A Units per hite 1 hite 1 STANAR PACK oor-mount (Pie-Cut) eight per 10.7 lbs. [4.9 kg.] 13.8 lbs. [6.3 kg.] B C Units per 5 5 Z BULK PACK eight per 30.6 lbs. [13.9 kg.] 63.4 lbs. [28.8 kg.] See Page 30 for available Cabinet and Shelf Lip imensions for the part numbers on this page. Customer Service:

25 Lazy Susans Polymer Lazy Susans Polymer alf-moon Lazy Susans Shelves move independently on chrome 1" diameter post All models operate in both right- or left-handed applications Pivot/Pivot Operation: both shelves pivot out Pivot/Glide Operation: top shelf pivots out / bottom shelf pivots and glides out Glide/Glide Operation: both shelves pivot and glide out All glide-out shelves extend 11-3/4" on precision ball-bearing slides Pivot/Glide Operation (PM28PG- shown) A B Pivot-Out B Glide-Out A Glide/Glide Operation (PM28GG- shown) PM28PG- Post eight 17" [431.8 mm] See Page 31 for available Cabinet and Shelf Lip imensions for the part numbers on this page. PM28GG- PM28PP- A B Finish Units per eight per PIVOT/PIVOT [TOP/BOTTOM] SELF MOTION PM28PP- 27-7/8" [708 mm] 13" [330 mm] hite 1 13 lbs. [5.9 kg.] PIVOT/GLIE [TOP/BOTTOM] SELF MOTION PM28PG- 27-7/8" [708 mm] 13" [330 mm] hite lbs. [7.5 kg.] PM34PG- 33-7/8" [860 mm] 16" [406 mm] hite 1 20 lbs. [9.1kg.] PM40PG- 39-7/8" [1,013 mm] 19" [483 mm] hite lbs. [12.4 kg.] GLIE/GLIE [TOP/BOTTOM] SELF MOTION PM28GG- 27-7/8" [708 mm] 13" [330 mm] hite lbs. [9.0 kg.] PM34GG- 33-7/8" [860 mm] 16" [406 mm] hite lbs. [10.0 kg.] PM40GG- 39-7/8" [1,013 mm] 19" [483 mm] hite lbs. [14.0 kg.] 24 ownload at > Resource Library

26 ire Full-Round & Kidney-Shaped Lazy Susans KV Eco-Friendly Frosted Nickel finish or hite Individual shelf rotation on chrome 1" diameter telescoping post Shelf mounting system allows for unlimited shelf positions on post ire Lazy Susans Lazy Susans FR28STM- Kidney C A B Post eight 28-1/2" [711 mm] to 30-1/2" [762 mm] FULL-ROUN iameter PC28STM-FN PC24STM Assembled Product imensions Finish FR24STM Units per eight per FR24STM-FN 24" [609.6 mm] Frosted Nickel* lbs. [5.8 kg.] FR28STM-FN 28" [711.2 mm] Frosted Nickel* lbs. [7.8 kg.] FR24STM- 24" [609.6 mm] hite lbs. [5.8 kg.] FR28STM- 28" [711.2 mm] hite lbs. [7.8 kg.] KINEY-SAPE PC24STM-FN 24" [610 mm] 14-3/8" [365 mm] 2-3/8" [60 mm] 1-11/16" [43 mm] Frosted Nickel* lbs. [5.5 kg.] PC28STM-FN 28" [711 mm] 18-5/8" [473 mm] 4-5/8" [117 mm] 3-5/16" [84 mm] Frosted Nickel* lbs. [7.5 kg.] PC32STM-FN 32" [813 mm] 20-3/4" [527 mm] 4-3/4" [121 mm] 3-3/8" [86 mm] Frosted Nickel* 1 18 lbs. [8.2 kg.] PC24STM- 24" [610 mm] 14-3/8" [365 mm] 2-3/8" [60 mm] 1-11/16" [43 mm] hite lbs. [5.5 kg.] PC28STM- 28" [711 mm] 18-5/8" [473 mm] 4-5/8" [117 mm] 3-5/16" [84 mm] hite lbs. [7.5 kg.] PC32STM- 32" [813 mm] 20-3/4" [527 mm] 4-3/4" [121 mm] 3-3/8" [86 mm] hite 1 18 lbs. [8.2 kg.] * Eco-Friendly. See page 4 for more information. A B C See Page 29 for available Cabinet and Shelf Lip imensions for the part numbers on this page. Customer Service:

27 Lazy Susans ire Lazy Susans A ire alf-moon Lazy Susans B -Shape -Shape esigned for use in blind corner cabinets C KV Eco-Friendly Frosted Nickel finish or hite Pivot-out shelf features non-handed reversible hinge system Glide-out shelf extends on 21-5/8" heavy-duty ball-bearing slides Nylon door follower attaches Lazy Susan to door for automatic shelf retrieval (pivot-out models only) E B F 1/2" [12.7 mm] 1/2" [12.7 mm] F TOP: M28- / BOTTOM: M28G- A B Pivot-Out B Pivot-Out Pivot-Out Y 1/2" [12.7 mm] A M28 1/2" [12.7 mm] 1/2" [12.7 mm] F A B Glide-Out M28G Glide-Out 1/2" [12.7 mm] Y M28G-FN See Page 31 for available Cabinet and Shelf Lip imensions for the part numbers on this page. PIVOT-OUT SELF MOTION M25- M28- M30- M34- M25-FN M28-FN M34-FN iameter Units eight iameter Finish per per A B A B 24-1/2" [622 mm] 27-1/2" [699 mm] 29-1/2" [749 mm] 33-1/2" [851 mm] 24-1/2" [622 mm] 27-1/2" [699 mm] 33-1/2" [2851 mm] 11-7/8" [302 mm] 13-3/8" [340 mm] 14-1/4" [365 mm] 16-3/8" [416 mm] 11-7/8" [302 mm] 13-3/8" [340 mm] 16-3/8" [416 mm] hite 1 hite 1 hite 1 hite 1 Frosted Nickel** Frosted Nickel** Frosted Nickel** lbs. [2.0 kg.] 4.7 lbs. [2.1 kg.] 5.0 lbs. [2.3 kg.] 6.0 lbs. [2.7 kg.] 4.4 lbs. [2.0 kg.] 4.7 lbs. [2.1 kg.] 6.0 lbs [2.7 kg.] GLIE-OUT SELF MOTION M25G- M28G- M34G- M25G-FN M28G-FN M34G-FN M28G-P 24-13/16" [630 mm] 27-13/16" [706 mm] 33-13/16" [859 mm] 24-13/16" [630 mm] 27-13/16" [706 mm] 33-13/16" [859 mm] 27-13/16" [706 mm] 12-7/8" [327 mm] 14-1/4" [362 mm] 17-1/4" [438 mm] 12-7/8" [327 mm] 14-1/4" [362 mm] 17-1/4" [438 mm] 14-1/4" [362 mm] Finish Units per hite 1 hite 1 hite 1 Frosted Nickel** Frosted Nickel** Frosted Nickel** Platinum 1 eight per 9.9 lbs. [4.5 kg.] 10.9 lbs. [4.9 kg.] 11.7 lbs. [5.3 kg.] 9.9 lbs. [4.5 kg.] 10.9 lbs. [5 kg.] 11.7 lbs. [5.3 kg.] 10.9 lbs. [5 kg.] **See page 4 for Frosted Nickel information. 26 ownload at > Resource Library

28 Individual ardware Replacement Parts Replacement Parts Lazy Susans 1 LS-UNIMNT-L oweled Plastic Unimount Plate (For Polymer/ood Full-Round and Kidney Lazy Susans) 2 LS-UNIMNT-AA Plastic Unimount Plate (For Polymer/ood Full-Round and Kidney Lazy Susans) 3 UB-PIN Bearing Pin for Lazy Susans (For Polymer/ood Full-Round, Kidney oor-mount, and Single Shelf Lazy Susans) Application Example 1 or ".3915" " 1.26" 4 PLC-BR-C-10 Beauty Cap 4 or 5 (For Polymer 18" & 20" Full-Round and 18" Kidney Lazy Susans) 4 or 5 5 PLC-BROS-C-10 Beauty Cap (Oversized) (For Polymer 28" & 32" Full-Round, 24", 28" & 32" Kidney and 22" -Shaped Lazy Susans) 3 6 R7G- Slide & Shelf Frame Assembly (For ire alf-moon Glide-Out Lazy Susans.) 3 1 or 2 escription Units eight per Unit escription Units per eight per INIVIUAL ARARE PARTS (SOL PER UNIT) INIVIUAL ARARE PARTS (SOL PER CARTON) 1 2 LS-UNIMNT-L LS-UNIMNT-AA oweled Plastic Unimount Plate Plastic Unimount Plate lbs. [0.02 kg.] 0.07 lbs. [0.03 kg.] 4 5 PLC-BR-C-10 Beauty Cap 10 PLC-BROS-C-10 Beauty Cap (Oversized) lbs. [0.68 kg.] 0.4 lbs. [0.18 kg.] 3 UB-PIN Bearing Pin for Lazy Susans lbs. [0.2 kg.] 6 R7G- Slide & Shelf Frame Assembly lbs. [5.8 kg.] Customer Service:

29 Lazy Susans Replacement Parts Lazy Susan Post Replacement Parts 1 For POLYMER Full-Round / Kidney Shelves 2 For OO Full-Round / Kidney Shelves Mounting Plate [LS-UNIMNT-AA] Mounting Plate [LS-UNIMNT-AA] Inner Pole Inner Pole Bearing ubs Beauty Caps [PLC-BROS-C] Bearing ubs Beauty Caps Shipping Clips Shipping Clips ub Pin [UB-PIN] Lower Pole ub Pin [UB-PIN] Lower Pole Mounting Plate [LS-UNIMNT-AA] Mounting Plate [LS-UNIMNT-AA] NOTE: Items with part numbers may be ordered individually, see page 27. LAZY SUSAN POST ARARE PACKS STANAR PACK # Pkd. BULK PACK # Pkd. FULL-ROUN 2 1 For Shelf Type(s) Bearing ubs Beauty/ Post Caps Mounting Plates R-FS-1-PC 1 ood Platinum Chrome Metal Unimount N-F-TEL-PT 1 Polymer hite Metal Unimount KINEY-SAPE R-KS-1-PC 1 ood Platinum Chrome Metal Unimount 1 R-S-BLK ood hite hite R-S-1-L 1 ood hite hite hite Plastic Unimount oweled hite Plastic Unimount N-K-TEL-PT 1 Polymer hite Chrome Metal Unimount Post eight Range 25-1/2" 31-1/2" [635 mm mm] 25-1/2" 31-1/2" [635 mm mm] 25-1/2" 31-1/2" [635 mm mm] 25-1/2" 31-1/2" [635 mm mm] 25-1/2" 31-1/2" [635 mm mm] 25-1/2" 31-1/2" [635 mm mm] ST. PK. t. 2.8 lbs. [1.3 kg.] 4.8 lbs. [2.2 kg.] 2.8 lbs. [1.3 kg.] 2.6 lbs. [1.2 kg.] 1.9 lbs. [0.9 kg.] BULK PK. t. 24 lbs. [10.9 kg.] 20 lbs. [9.1 kg.] 21.4 lbs. [9.7 kg.] 9.5 lbs. [4.3 kg.] All hardware packs include hub pins [UB-PIN], shipping clips, installation hardware and instruction sheets. 28 ownload at > Resource Library

30 Cabinet and Shelf Lip imensions Cabinet and Lip imensions Lazy Susans KINEY-SAPE LAZY SUSANS E = Radius F = Min. Cabinet epth G = Center of Rotation = Min. Cabinet Opening 3/4" [19.05 mm] E 3/4" [19.05 mm] 3/4" [19.05 mm] OO Shelf Lip I J IRE & POLYMER Shelf Lip I J Kidney 3/4" [19.05 mm] F K Top of Floor K Top of Floor G OO Kidney-Shaped Lazy Susans SS-K-28-FN 14-7/16" [367 mm] IRE Kidney-Shaped Lazy Susans PC24STM- 12" [305 mm] PC28STM- 14" [356 mm] PC32STM- 16" [406 mm] PC24STM-FN 12" [305 mm] PC28STM-FN 14" [356 mm] PC32STM-FN 16" [406 mm] POLYMER Kidney-Shaped Lazy Susans PKN18ST- 9" [229 mm] PKN24ST- 12" [305 mm] PKN28ST- 14" [356 mm] PKN32ST- 16" [406 mm] E F G I J K 21-5/8" [549 mm] 15-3/16" [386 mm] 18-13/16" [478 mm] 20-7/8" [530 mm] 15-3/16" [386 mm] 18-13/16" [478 mm] 20-7/8" [530 mm] 11-7/16" [291 mm] 15-1/8" [384 mm] 18-9/16" [471 mm] 21-15/16" [557 mm] 6-7/16" [164 mm] 2-7/16" [62 mm] 4-1/16" [103 mm] 4-1/8" [105 mm] 2-7/16" [62 mm] 4-1/16" [103 mm] 4-1/8" [105 mm] 1-11/16" [43 mm] 2-3/8" [60 mm] 3-13/16" [97 mm] 5-3/16" [132 mm] 9-1/4" [235 mm] 10" [254 mm] 10-1/8" [257 mm] 12-1/16" [306 mm] 10" [254 mm] 10-1/8" [257 mm] 12-1/16" [306 mm] 7-5/8" [194 mm] 10" [254 mm] 10-1/4" [260 mm] 10-1/2" [267 mm] 4-1/8" [105 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 3-7/16" [87 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1" [25 mm] 1" [25 mm] 1" [25 mm] 1" [25 mm] 2-1/16" [52 mm] 2-3/8" [60 mm] 2-3/8" [60 mm] 2-3/8" [60 mm] 2-3/8" [60 mm] 2-3/8" [60 mm] 2-3/8" [60 mm] 1/2" 1-5/16" [13 33 mm] 1/2" 1-5/16" [13 33 mm] 1/2" 1-5/16" [13 33 mm] 1/2" 1-5/16" [13 33 mm] Mounting Top/Bottom Top/Bottom Top/Bottom Top/Bottom Top/Bottom Top/Bottom Top/Bottom Top/Bottom Top/Bottom Top/Bottom Top/Bottom FULL-ROUN LAZY SUSANS A minimum 3/4" side clearance is recommended between Full-Round Lazy Susan shelves and all adjacent interior surfaces (cabinet, wall, etc.). 3/4" [19.05 mm] 3/4" [19.05 mm] iameter 3/4" [19.05 mm] 3/4" [19.05 mm] Full-Round 3/4" 3/4" imensions shown are recommended minimum cabinet dimensions and clearances. Customer Service:

31 Lazy Susans Cabinet and Lip imensions Cabinet and Shelf Lip imensions E F G I J K Mounting POLYMER oor Mount / Pie-Cut Lazy Susans PPN24S- PPN28S- 12" [305 mm] 14" [356 mm] 15-1/8" [384 mm] 18-9/16" [471 mm] 2-3/8" [60 mm] 3-13/16" [97 mm] 10" [254 mm] 10-1/4" [260 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1" [25 mm] 1" [25 mm] 1-1/16 1-7/8" [27 47 mm] 1-1/16 1-7/8 [27 47 mm] Top/Bottom Top/Bottom E F = Radius = Min. Cabinet epth 3/4" [19.05 mm] G = Center of Rotation = Min. Cabinet Opening 1/4" Gap Between Face Frame and oor 3/4" [19.05 mm] E 3/4" [19.05 mm] POLYMER Shelf Lip J I oor-mount (Pie-Cut) K 3/4" [19.05 mm] F Top of Floor G E F G I J K POLYMER -Shaped Lazy Susans / CORNER Application imensions PN22ST- PN22S5T- 11" [279 mm] 11" [279 mm] 20-13/16" [529 mm] 20-13/16" [529 mm] 11" [279 mm] 11" [279 mm] POLYMER -Shaped Lazy Susans / RECTANGULAR Application imensions PN22ST- PN22S5T- 11" [279 mm] 11" [279 mm] 19-15/16" [506 mm] 19-15/16" [506 mm] 11" [279 mm] 11" [279 mm] 14" [356 mm] 14" [356 mm] 17-5/8" [448 mm] 17-5/8" [448 mm] 1-3/4" [44 mm] 1-3/4" [44mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1" [25 mm] 1" [25 mm] 1" [25 mm] 1" [25 mm] 1/2 1-5/16" [13 33 mm] 1/2 1-5/16" [13 33 mm] 1/2 1-5/16" [13 33 mm] 1/2 1-5/16" [13 33 mm] Mounting Top/Bottom Top/Bottom Top/Bottom Top/Bottom E = Radius F = Min. Cabinet epth G = Center of Rotation = Min. Cabinet Opening POLYMER Shelf Lip J I K 3/4" [19 mm] 1-7/8" [48 mm] E -Shaped Corner Cabinet Applications F 3/4" [19 mm] 0" [0 mm] 22-3/4" [578 mm] E -Shaped Rectangular Cabinet Applications F Top of Floor imensions shown are recommended minimum cabinet dimensions and clearances. 30 ownload at > Resource Library

32 Cabinet and Shelf Lip imensions IRE alf-moon Lazy Susans M /2" [343 mm] M /16" [379 mm] M /16" [405 mm] M /16" [456 mm] M25-FN 13-1/2" [343 mm] M28-FN 14-15/16" [379 mm] M34-FN 17-15/16" [456 mm] M25G- 13-5/8" [346 mm] M28G- 15-1/8" [384 mm] M34G- 18-1/8" [460 mm] M25G-FN 13-5/8" [346 mm] M28G-FN 15-1/8" [384 mm] M34G-FN 18-1/8" [460 mm] M28G-P 15-1/8" [384 mm] POLYMER alf-moon Lazy Susans PM28PP- 16-1/4" [413 mm] PM28PG- 16-1/4" [413 mm] PM34PG- 19-1/4" [489 mm] PM40PG- 22-1/4" [565 mm] PM28GG- 16-1/4" [413 mm] PM34GG- 19-1/4" [489 mm] PM40GG- 22-1/4" [565 mm] F I J K Y 12-3/8" [314 mm] 13-7/8" [352 mm] 14-3/4" [375 mm] 16-7/8" [429 mm] 12-3/8" [314m] 13-7/8" [352 mm] 16-7/8" [429 mm] 13-3/8" 340 mm] 14-3/4" [375 mm] 17-3/4" [451 mm] 13-3/8" [340 mm] 14-3/4" [375 mm] 17-3/4" [451 mm] 13-3/8" [340 mm] 13-3/4" [349 mm] 13-3/4" [349 mm] 16-3/4" [425 mm] 19-3/4" [502 mm] 13-3/4" [349 mm] 16-3/4" [425 mm] 19-3/4" [502 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 2" [51 mm] 2" [51mm] 2" [51 mm] 2-1/2" [64 mm] 2-1/2" [64 mm] 2-1/2" [64 mm] 2-1/2" [64 mm] 2-1/2" [64 mm] 2-1/2" [64 mm] 2-1/2" [64 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-1/2" [38 mm] 1-1/2" [38 mm] 1-1/2" [38 mm] 1-1/2" [38 mm] 1-1/2" [38 mm] 1-1/2" [38 mm] 1-1/2" [38 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 1-3/4" [44 mm] 2-1/2" [64 mm] 2-1/2" [64 mm] 2-1/2" [64 mm] 2-1/2" [64 mm] 2-1/2" [64 mm] 2-1/2" [64 mm] 2-1/2" [64 mm] 2" [51 mm] 2-11/16" [68 mm] 2-11/16" [68 mm] 2-11/16" [68 mm] 2-11/16" [68 mm] 2-11/16" [68 mm] 2-11/16" [68 mm] Cabinet and Lip imensions Lazy Susans 10-7/8" [276 mm] 12-5/16" [313 mm] 13-5/16" [338 mm] 15-5/16" [389 mm] 10-7/8" [276 mm] 12-5/16" [313 mm] 15-5/16" [389 mm] 27-3/4" [705 mm] 29-3/16" [741 mm] 32-3/16" [818 mm] 27-3/4" [705 mm] 29-3/16" [741 mm] 32-3/16" [818 mm] 29-3/16" [741 mm] 11-1/2" [292 mm] 23-1/4" [591 mm] 26-1/4" [667 mm] 29-1/4" [743 mm] 23-1/4" [591 mm] 26-1/4" [677 mm] 29-1/4" [743 mm] Mounting Side Bracket Side Bracket Side Bracket Side Bracket Side Bracket Side Bracket Side Bracket Side Bracket Side Bracket Side Bracket Side Bracket Side Bracket Side Bracket Side Bracket Side/Bottom Side/Bottom Side/Bottom Side/Bottom Side/Bottom Side/Bottom Side/Bottom F = Min. Cabinet epth = Min. Cabinet Opening 1/2" [12.7 mm] 1/2" [12.7 mm 1/2" [12.7 mm] 1/2" [12.7 mm] IRE & POLYMER Shelf Lip F Pivot-Out F I J Glide-Out 1/2" [12.7 mm] Y Y 1/2" [12.7 mm] K Top of Floor imensions shown are recommended minimum cabinet dimensions and clearances. Customer Service:

33 Lazy Susans iagrams Lazy Susan Post iagrams For POLYMER oor-mount/pie-cut Lazy Susans Top Mounting Plate Bearing ub For IRE Full-Round/Kidney-Shaped Lazy Susans Top Mount Bushing Upper Shelf Bushing Inner Pole Assembly Shaft Collar Lower Pole Assembly Lower KINEY-SAPE Shelf Bushing (with detent feature) Lower FULL-ROUN Shelf Bushing Shipping Clip ub Pin Lower Pole Assembly Bottom Mounting Plate KINEY-SAPE FULL-ROUN For POLYMER alf-moon Glide-Out Lazy Susan Shelves For POLYMER Pivot-Out Glide-Out Lazy Susan Shelves Post Top Cap alf-moon Shelf Post Top Cap alf-moon Shelf Mounting Bracket Mounting Bracket Shelf Frame Assembly Shaft & Collar Slide & Shelf Frame Assembly Shelf Post Shaft & Collar Shelf Post Mounting Plate Mounting Plate For illustration purposes diagrams on this page are shown with one shelf. See individual product pages for more information. 32 ownload at > Resource Library

34 Lazy Susan Post iagrams iagrams Lazy Susans IRE ALF MOON INGE BRACKETS Top View - For all ire alf Moon Susans Side View - For all ire alf Moon Susans POLYMER ALF MOON INGE BRACKETS For PM28 and PM34 Part Numbers For PM40 Part Numbers Customer Service:

35 rawer Inserts & Sink Front Trays Tableware Trays...36 Utility Trays...37 Spice Trays...38 Steel Sink Front Trays...39 Polymer & Extruded Sink Front Trays...41 Scissor & Euro-Tray inges...44 rawer Insert iagrams...45 Cabinet imensions ownload at > Resource Library

36

37 rawer Inserts & Sinks Front Trays Tableware Trays Tableware Trays Organizes tableware, cutlery and more into easy-access trays urable, high gloss white polystyrene cleans up easily and trims to fit drawer ouble-tiered units offer double storage capacity and come pre-assembled with epoxy-coated drawer slides Removable top tray Top tray designed for tableware ouble-tiered Tableware Tray (1775- with removable top tray shown) ouble-tiered Tableware Tray (1475- shown) Bottom tray designed for cutlery and other large items Single-Tier Tableware Tray (T1217- shown) Single-Tiered Tableware Tray (T1217- shown) See page 45 for compartment information. See page 46 for minimum drawer dimensions. eight idth epth Finish OUBLE-TIERE TABLEARE TRAYS* (IT REMOVABLE TOP TRAY) Units per eight per /2" [89 mm]** 12-1/4" [311 mm] to 14-3/4" [375 mm] 17-1/4" [438 mm] to 19-1/4" [489 mm] hite lbs. [2.1 kg.] /2" [89 mm]** 15-1/4" [387 mm] to 17-3/4" [451 mm] 17-1/4" [438 mm] to 19-1/4" [489 mm] hite lbs. [2.4 kg.] /2" [89 mm]** 18-1/4" [464 mm] to 20-3/4" [527 mm] 17-1/4" [438 mm] to 19-1/4" [489 mm] hite lbs. [2.8 kg.] SINGLE-TIERE TABLEARE TRAYS T /16" [56 mm] 8-3/4" [222 mm] to 11-3/4" [298 mm] 17-5/16" [440 mm] to 21" [533 mm] hite lbs. [4.0 kg.] T /8" [54 mm] 12-3/8" [314 mm] to 14-11/16" [373 mm] 17-5/16" [440 mm] to 21" [533 mm] hite lbs. [4.9 kg.] T /8" [54 mm] 15-5/16" [389 mm] to 17-11/16" [449 mm] 17-5/16" [440 mm] to 21" [533 mm] hite lbs. [5.9 kg.] T /8" [54 mm] 18-3/8" [467 mm] to 21-1/8" [537 mm] 17-3/8" [441 mm] to 21" [533 mm] hite lbs. [7.0 kg.] T /16" [56 mm] 8-3/4" [222 mm] to 11-3/4" [298 mm] 17-5/16" [440 mm] to 21" [533 mm] hite lbs. [0.5 kg.] T /8" [54 mm] 12-3/8" [314 mm] to 14-11/16" [373 mm] 17-5/16" [440 mm] to 21" [533 mm] hite lbs. [1.0 kg.] T /8" [54 mm] 15-5/16" [389 mm] to 17-11/16" [449 mm] 17-5/16" [440 mm] to 21" [533 mm] hite lbs. [1.3 kg.] T /8" [54 mm] 18-3/8" [467 mm] to 21-1/8" [537 mm] 17-3/8" [441 mm] to 21" [533 mm] hite lbs. [1.4 kg.] *Rear of cabinet drawer needs to be notch cut to allow top tray of ouble-tiered Tableware Trays to slide back. **eight includes top and bottom tray. 36 ownload at > Resource Library

38 Utility Trays rawer Inserts & Sinks Front Trays Utility Trays Multipurpose Utility Trays neatly organize kitchen utensils, craft supplies, tools and more Cosmetic Tray organizes cosmetics and small items into 5 easy-to-access rows and compartments urable, high gloss white polystyrene cleans up easily and can be cut to fit Multipurpose Utility Tray (UT1217- shown) UT1217- UT1517- & UT1817- Cosmetic Tray (COS2075- shown) Includes accessory tray eight idth epth Finish MULTI-PURPOSE UTILITY TRAYS Units per eight per UT /16" [56 mm] 12-3/8" [314 mm] to 14-3/4" [375 mm] 17-3/8" [441 mm] to 21" [533 mm] hite lbs. [5.1 kg.] UT /16" [56 mm] 15-5/16" [389 mm] to 17-3/4" [451 mm] 17-5/16" [440 mm] to 21" [533 mm] hite lbs. [5.8 kg.] UT /16" [56 mm] 18-3/8" [467 mm] to 21-1/8" [537 mm] 17-5/16" [440 mm] to 21" [533 mm] hite lbs. [6.4 kg.] COSMETIC TRAY COS2075- COS /8" [73 mm] 5" [127 mm] to 21-1/2" [546 mm] 16-1/4" [413 mm] to 21" [533 mm] hite lbs. [1.1 kg.] See page 45 for compartment information. See page 46 for minimum drawer dimensions. Customer Service:

39 rawer Inserts & Sinks Front Trays Spice Trays Spice Trays Organizes spices or small items into four neat rows Birch veneer finish on ood Spice Trays complements most interior wood drawer finishes urable, high gloss white Polymer Spice Trays clean up easily and can be cut to fit ood Spice Tray (SPICETRAY10) 1.4" [36 mm] 1.6" [41 mm] 3.8" [97 mm] 5.5" [140 mm] 1.2" [31 mm] SPICETRAY10 4.5" [114 mm] 1" 3.3" [25 mm] [88 mm] 2.1" [53 mm] SG1088- / SG Polymer Spice Tray (SG ) eight idth epth Finish Units per eight per See page 46 for minimum drawer dimensions. OO SPICE TRAYS SPICETRAY /16" [46 mm] 10-1/8" [257 mm] 19-1/2" [495 mm] Birch Veneer lbs. [1.3 kg.] SPICETRAY /16" [46 mm] 13-1/8" [333 mm] 19-1/2" [495 mm] Birch Veneer lbs. [1.7 kg.] SPICETRAY /16" [46 mm] 16-1/8" [410 mm] 19-1/2" [495 mm] Birch Veneer lbs. [1.9 kg.] SPICETRAY /16" [46 mm] 19-1/8" [486 mm] 19-1/2" [495 mm] Birch Veneer lbs. [2.3 kg.] POLYMER SPICE TRAYS SG " [51 mm] 12-1/8" [308 mm] 16-1/4" [413 mm] to 14-3/4" [375 mm] to 21 [533 mm] hite lbs. [0.9 kg.] SG1088-2" [51 mm] 12-1/8" [308 mm] 16-1/4" [413 mm] to 14-3/4" [375 mm] to 21 [533 mm] hite lbs. [3.9 kg.] 38 ownload at > Resource Library

40 Steel Sink Front Trays Steel Sink Front Trays rawer Inserts & Sinks Front Trays 2" deep tray esigned for use with Scissor or Euro-Tray inges (Sold separately. See page 44.) hite trays feature durable epoxy-coated finish For use with face frame or frameless (Euro-Style) cabinetry SF11 (inges not included) Steel Sink Front tray (inges not included) ESF10- (inges not included) eight idth epth Finish Units per eight per STEEL SINK FRONT TRAYS (ITOUT STOPS) SF10 3" [76 mm] 10-1/16" [256 mm] 2" [51 mm] Stainless Steel lbs. [2.1 kg.] SF11 3" [76 mm] 11-5/16" [287 mm] 2" [51 mm] Stainless Steel lbs. [2.2 kg.] SF13 3" [76 mm] 13-1/16" [332 mm] 2" [51 mm] Stainless Steel lbs. [2.5 kg.] SF14 3" [76 mm] 14" [356 mm] 2" [51 mm] Stainless Steel lbs. [3.0 kg.] SF16 3" [76 mm] 16-1/16" [408 mm] 2" [51 mm] Stainless Steel lbs. [3.2 kg.] SF19 3" [76 mm] 19-1/16" [484 mm] 2" [51 mm] Stainless Steel lbs. [3.4 kg.] SF22 3" [76 mm] 22-1/16" [560 mm] 2" [51 mm] Stainless Steel lbs. [4.0 kg.] SF25 3" [76 mm] 25-1/16" [637 mm] 2" [51 mm] Stainless Steel lbs. [4.2 kg.] SF28 3" [76 mm] 28-1/16" [713 mm] 2" [51 mm] Stainless Steel lbs. [4.7 kg.] SF31 3" [76 mm] 31-1/16" [789 mm] 2" [51 mm] Stainless Steel lbs. [5.0 kg.] ESF10-3" [76 mm] 10-1/16" [256 mm] 2" [51 mm] hite lbs. [2.4 kg.] ESF13-3" [76 mm] 13-1/16" [332 mm] 2" [51 mm] hite lbs. [2.9 kg.] ESF14-3" [76 mm] 14" [356 mm] 2" [51 mm] hite lbs. [3.2 kg.] ESF16-3" [76 mm] 16-1/16" [408 mm] 2" [51 mm] hite lbs. [3.4 kg.] ESF19-3" [76 mm] 19-1/16" [484 mm] 2" [51 mm] hite lbs. [4.1 kg.] ESF22-3" [76 mm] 22-1/16" [560 mm] 2" [51 mm] hite lbs. [4.8 kg.] ESF25-3" [76 mm] 25-1/16" [637 mm] 2" [51 mm] hite lbs. [5.4 kg.] ESF28-3" [76 mm] 28-1/16" [713 mm] 2" [51 mm] hite lbs. [5.9 kg.] ESF31-3" [76 mm] 31-1/16" [789 mm] 2" [51 mm] hite lbs. [6.7 kg.] Uses two - #8 x 1/2 screws (not included). See page 46 for minimum door dimensions. Customer Service:

41 rawer Inserts & Sinks Front Trays Steel Sink Front Trays Steel Sink Front Trays (with stops) 1-5/8" built-in stop prevents items from tipping out esigned for use with standard self-closing hinges (not included) used on most cabinetry hite trays feature durable epoxy-coated finish For use with face frame or frameless (Euro-Style) cabinetry SF11 Steel Sink Front Tray (with Stops) ESF10- eight idth epth Finish Units per eight per STEEL SINK FRONT TRAYS (IT STOPS) SF10 3" [76 mm] 11-5/8" [295 mm] 3" [76 mm] Stainless Steel 10 5 lbs. [2.3 kg.] SF11 3" [76 mm] 12-7/8" [327 mm] 3" [76 mm] Stainless Steel lbs. [2.4 kg.] SF13 3" [76 mm] 14-5/8" [371 mm] 3" [76 mm] Stainless Steel lbs. [2.6 kg.] SF14 3" [76 mm] 15-9/16" [395 mm] 3" [76 mm] Stainless Steel lbs. [2.7 kg.] SF16 3" [76 mm] 17-5/8" [448 mm] 3" [76 mm] Stainless Steel lbs. [3.1 kg.] SF19 3" [76 mm] 20-5/8" [524 mm] 3" [76 mm] Stainless Steel lbs. [3.4 kg.] SF22 3" [76 mm] 23-5/8" [600 mm] 3" [76 mm] Stainless Steel lbs. [4.1 kg.] SF25 3" [76 mm] 26-5/8" [676 mm] 3" [76 mm] Stainless Steel lbs. [5.4 kg.] SF28 3" [76 mm] 29-5/8" [752 mm] 3" [76 mm] Stainless Steel lbs. [6.3 kg.] SF31 3" [76 mm] 32-5/8" [829 mm] 3" [76 mm] Stainless Steel lbs. [6.6 kg.] ESF10-3" [76 mm] 11-5/8" [295 mm] 3" [76 mm] hite lbs. [2.8 kg.] See page 46 for minimum door dimensions. ESF11-3" [76 mm] 12-7/8" [327 mm] 3" [76 mm] hite lbs. [3.0 kg.] ESF13-3" [76 mm] 14-5/8" [371 mm] 3" [76 mm] hite lbs. [3.3 kg.] ESF14-3" [76 mm] 15-9/16" [395 mm] 3" [76 mm] hite lbs. [3.5 kg.] ESF16-3" [76 mm] 17-5/8" [448 mm] 3" [76 mm] hite lbs. [3.7 kg.] ESF19-3" [76 mm] 20-5/8" [524 mm] 3" [76 mm] hite lbs. [4.4 kg.] ESF22-3" [76 mm] 23-5/8" [600 mm] 3" [76 mm] hite lbs. [5 kg.] ESF25-3" [76 mm] 26-5/8" [676 mm] 3" [76 mm] hite lbs. [5.4 kg.] ESF28-3" [76 mm] 29-5/8" [752 mm] 3" [76 mm] hite lbs. [6.3 kg.] ESF31-3" [76 mm] 32-5/8" [829 mm] 3" [76 mm] hite lbs. [6.8 kg.] Uses two - #8 x 1/2 screws (not included). 40 ownload at > Resource Library

42 Polymer Sink Front Trays rawer Inserts & Sinks Front Trays Polymer Sink Front Trays 1-5/8" deep tray is ideal for solid surface countertops with large deep sink applications esigned for use with Scissor or Euro-Tray inges (Sold separately. See page 44.) For use with face frame or frameless (Euro-Style) cabinetry PSF11- (ithout ring holder) (inges not included) PSF11RS-A (Includes ring holder. inges not included) Polymer Sink Front Tray PSF11RS- (Includes ring holder) (inges not included) eight idth epth Finish Ring holder POLYMER SINK FRONT TRAYS Units per eight per PSF8.62-3" [76 mm] 8-5/8" [219 mm] 2" [51 mm] hite No lbs. [1.3 kg.] PSF11-PF- 3" [76 mm] 11" [279 mm] 1-5/8" [41 mm] hite No lbs. [1.5 kg.] PSF11-3" [76 mm] 11" [279 mm] 2" [51 mm] hite No 10 3 lbs. [1.4 kg.] PSF11RS- 3" [76 mm] 11" [279 mm] 2" [51 mm] hite Yes lbs. [1.4 kg.] PSF14-PF- 3" [76 mm] 14" [356 mm] 1-5/8" [41 mm] hite No lbs. [1.6 kg.] PSF14-3" [76 mm] 14" [356 mm] 2" [51 mm] hite No lbs. [1.5 kg.] PSF14RS- 3" [76 mm] 14" [356 mm] 2" [51 mm] hite Yes lbs. [1.6 kg.] PSF2425-3" [76 mm] 24-3/8" [619 mm] 2" [51 mm] hite No lbs. [2.8 kg.] PSF3025-3" [76 mm] 30-7/16" [773 mm] 2" [51 mm] hite No lbs. [3.3 kg.] PSF11-A 3" [76 mm] 11" [279 mm] 2" [51 mm] Almond No lbs. [1.3 kg.] PSF11RS-A 3" [76 mm] 11" [279 mm] 2" [51 mm] Almond Yes lbs. [1.4 kg.] PSF14-PF-A 3" [76 mm] 14" [356 mm] 1-5/8" [41 mm] Almond No lbs. [1.6 kg.] PSF14-A 3" [76 mm] 14" [356 mm] 2" [51 mm] Almond No lbs. [1.5 kg.] PSF14RS-A 3" [76 mm] 14" [356 mm] 2" [51 mm] Almond Yes lbs. [1.6 kg.] PSF2425-A 3" [76 mm] 24-3/8" [619 mm] 2" [51 mm] Almond No lbs. [2.8 kg.] PSF3025-A 3" [76 mm] 30-7/16" [773 mm] 2" [51 mm] Almond No lbs. [3.3 kg.] See page 47 for minimum door dimensions. Uses two - #8 x 1/2 screws (not included). Customer Service:

43 rawer Inserts & Sinks Front Trays Polymer Sink Front Trays Polymer Sink Front Trays & inge Kits 1-5/8" deep tray is ideal for solid surface countertops with large deep sink applications For use with face frame or frameless (Euro-Style) cabinetry Two trays, two pairs of Scissor inges (S-1) with hardware and instructions included PSF14S-2- (inges included) 40 Polymer Sink Front Tray & inge Kit Scissor inge (S-10) PSF11S-2- (inges included) Kits include 2 pairs of Scissor inges (S-10) See page 47 for minimum drawer dimensions. eight idth epth Finish Kits per eight per POLYMER SINK FRONT TRAYS & INGE KITS PSF8.62S-2-3" [76 mm] 8-5/8" [219 mm] 2" [51 mm] hite lbs. [0.5 kg.] PSF11-PF-S-2-3" [76 mm] 11" [279 mm] 1-5/8" [41 mm] hite lbs. [0.7 kg.] PSF11S-2-3" [76 mm] 11" [279 mm] 2" [51 mm] hite lbs. [0.8 kg.] PSF14-PF-S-2-3" [76 mm] 14" [356 mm] 1-5/8" [41 mm] hite lbs. [0.9 kg.] PSF14S-2-3" [76 mm] 14" [356 mm] 2" [51 mm] hite lbs. [1.0 kg.] 42 ownload at > Resource Library

44 Polymer & Extruded Sink Front Trays rawer Inserts & Sinks Front Trays Polymer Sink Front Trays (with stops) esigned for use with standard self-closing hinges (not included) used on most cabinetry For use with face frame or frameless (Euro-Style) cabinetry Built-in stops prevent items from tipping out PSF11- PSF14-A Polymer Sink Front Tray with Stops Extruded Sink Front Trays Extruded Sink Front Tray (cut-to-fit 34" or 72" widths) For face frame or frameless (Euro-Style) cabinetry Use with Scissor or Euro-Tray inges (see page 44) Easy-to-clean, durable white PVC Extruded Sink Front Tray [XSF34-10-] End Caps [P-XSF-EC-20-] Extruded Sink Front Tray [XSF34-10-] End Caps [P-XSF-EC-20-] (Sold separately with adhesive.) eight idth epth Finish Units per eight per POLYMER SINK FRONT TRAY IT STOPS* PSF11-3" [76 mm] 12-3/8" [314 mm] 2-3/4" [70 mm] hite lbs. [1.5 kg.] PSF14-3" [76 mm] 15-3/8" [391 mm] 2-3/4" [70 mm] hite lbs. [1.6 kg.] PSF14-A 3" [76 mm] 15-3/8" [391 mm] 2-3/4" [70 mm] Almond lbs. [1.6 kg.] EXTRUE SINK FRONT TRAYS XSF " [102 mm] 33-3/4" [857 mm] 2-1/8" [60 mm] hite lbs. [3.1 kg.] XSF " [102 mm] 72" [1,829 mm] 2-1/8" [60 mm] hite lbs. [7.1 kg.] P-XSF-EC-20-4" [102 mm] 3/4" [19 mm] 2-3/8" [60 mm] hite 20 pairs 2.2 lbs. [1 kg.] * Tray uses two - #8 x 1/2 screws (not included). See page 47 for minimum door dimensions. Customer Service:

45 rawer Inserts & Sinks Front Trays Scissor & Euro-Tray inges Scissor & Euro-Tray inges Scissor inges are spring-loaded and self-closing with internal stop For use with face frame or frameless (Euro-Style) cabinetry Mounting hardware and instructions included Not intended for full overlay or inset cabinet applications 40 Scissor inge (S-10) Scissor inge (S-10) Euro-Tray inge (ET--N) Euro-Tray inge (ET--N) See page 47 for minimum door dimensions. eight idth epth Finish Units per eight per SCISSOR INGES S-1-S/P 3-13/16" [97 mm] 2-7/8" [73 mm] 1-7/8" [48 mm] Nickel-Plated 1 pair 1 lbs. [0.5 kg.] S /16" [97 mm] 2-7/8" [73 mm] 1-7/8" [48 mm] Nickel-Plated 10 pair 5.1 lbs. [2.3 kg.] S /16" [97 mm] 2-7/8" [73 mm] 1-7/8" [48 mm] Nickel-Plated 40 pair 20 lbs. [9.1 kg.] EURO-TRAY INGES ET--N 2-7/8" [73 mm] 3-3/4" [95 mm] 2-1/4" [57 mm] Nickel-Plated 10 pair 6.4 lbs. [2.9 kg.] 44 ownload at > Resource Library

46 rawer Insert iagrams rawer Insert iagrams rawer Inserts & Sinks Front Trays OUBLE-TIERE TABLEARE TRAYS Top Tray Top Tray Bottom Tray Top Tray Bottom Tray Bottom Tray SINGLE-TIERE TABLEARE TRAYS T850- T T1217- T T1517- T T1817- T MULTIPURPOSE UTILITY TRAYS UT1217- UT1517- UT1817- Customer Service:

47 rawer Inserts & Sinks Front Trays Cabinet imensions Cabinet imensions Minimum Interior rawer imensions eight idth epth OUBLE-TIERE TABLEARE TRAYS (with removable top tray) /4" [95 mm] 12-1/4" [311 mm] 17-1/4" [438 mm] /4" [95 mm] 15-1/4" [387 mm] 17-1/4" [438 mm] /4" [95 mm] 18-1/4" [464 mm] 17-1/4" [438 mm] SINGLE-TIERE TABLEARE TRAYS T /16" [62 mm] 8-3/4" [222 mm] 17-5/16" [440 mm] T /8" [60 mm] 12-3/8" [314 mm] 17-5/16" [440 mm] T /8" [60 mm] 15-5/16" [389 mm] 17-5/16" [440 mm] T /8" [60 mm] 18-3/8" [467 mm] 17-3/8" [441 mm] T /16" [62 mm] 8-3/4" [222 mm] 17-5/16" [440 mm] T /8" [60 mm] 12-3/8" [314 mm] 17-5/16" [440 mm] T /8" [60 mm] 15-5/16" [389 mm] 17-5/16" [440 mm] T /8" [60 mm] 18-3/8" [467 mm] 17-3/8" [441 mm] MULTIPURPOSE UTILITY TRAYS UT /16" [62 mm] 12-3/8" [314 mm] 17-3/8" [441 mm] UT /16" [62 mm] 15-5/16" [389 mm] 17-5/16" [440 mm] UT /16" [62 mm] 18-3/8" [467 mm] 17-5/16" [440 mm] COSMETIC RAER TRAYS COS /8" [79 mm] 5" [127 mm] 16-1/4" [413 mm] OO SPICE TRAYS SPICETRAY10 2-1/16" [52 mm] 10-1/4" [260 mm] 19-5/8" [498 mm] SPICETRAY13 2-1/16" [52 mm] 13-1/4" [337 mm] 19-5/8" [498 mm] SPICETRAY16 2-1/16" [52 mm] 16-1/4" [413 mm] 19-5/8" [498 mm] SPICETRAY19 2-1/16" [52 mm] 19-1/4" [489 mm] 19-5/8" [498 mm] POLYMER SPICE TRAYS SG /4" [57 mm] 12-1/8" [308 mm] 16-1/4" [413 mm] SG /4" [57 mm] 12-1/8" [308 mm] 16-1/4" [413 mm] imensions shown are recommended minimum interior drawer and door opening dimensions. Minimum interior drawer dimensions allow for 1/8" clearance and 3/8" lip on all sides of drawer inserts. eight idth epth STEEL SINK FRONT TRAYS (without stops) SF10 3-1/2" [89 mm] 10-9/16" [268 mm] 2-1/2" [64 mm] SF11 3-1/2" [89 mm] 11-13/16" [300 mm] 2-1/2" [64 mm] SF13 3-1/2" [89 mm] 13-9/16" [344 mm] 2-1/2" [64 mm] SF14 3-1/2" [89 mm] 14-1/2" [368 mm] 2-1/2" [64 mm] SF16 3-1/2" [89 mm] 16-9/16" [421 mm] 2-1/2" [64 mm] SF19 3-1/2" [89 mm] 19-9/16" [497 mm] 2-1/2" [64 mm] SF22 3-1/2" [89 mm] 22-9/16" [573 mm] 2-1/2" [64 mm] SF25 3-1/2" [89 mm] 25-9/16" [649 mm] 2-1/2" [64 mm] SF28 3-1/2" [89 mm] 28-9/16" [725 mm] 2-1/2" [64 mm] SF31 3-1/2" [89 mm] 31-9/16" [802 mm] 2-1/2" [64 mm] ESF10-3-1/2" [89 mm] 10-9/16" [268 mm] 2-1/2" [64 mm] ESF13-3-1/2" [89 mm] 13-9/16" [344 mm] 2-1/2" [64 mm] ESF14-3-1/2" [89 mm] 14-1/2" [368 mm] 2-1/2" [64 mm] ESF16-3-1/2" [89 mm] 16-9/16" [421 mm] 2-1/2" [64 mm] ESF19-3-1/2" [89 mm] 19-9/16" [497 mm] 2-1/2" [64 mm] ESF22-3-1/2" [89 mm] 22-9/16" [573 mm] 2-1/2" [64 mm] ESF25-3-1/2" [89 mm] 25-9/16" [649 mm] 2-1/2" [64 mm] ESF28-3-1/2" [89 mm] 28-9/16" [725 mm] 2-1/2" [64 mm] ESF31-3-1/2" [89 mm] 31-9/16" [802 mm] 2-1/2" [64 mm] STEEL SINK FRONT TRAYS (with stops) SF10 3-1/2" [89 mm] 12-1/8" [308 mm] 3-1/2" [89 mm] SF11 3-1/2" [89 mm] 13-3/8" [340 mm] 3-1/2" [89 mm] SF13 3-1/2" [89 mm] 15-1/8" [384 mm] 3-1/2" [89 mm] SF14 3-1/2" [89 mm] 16-1/16" [408 mm] 3-1/2" [89 mm] SF16 3-1/2" [89 mm] 18-1/8" [460 mm] 3-1/2" [89 mm] SF19 3-1/2" [89 mm] 21-1/8" [537 mm] 3-1/2" [89 mm] SF22 3-1/2" [89 mm] 24-1/8" [613 mm] 3-1/2" [89 mm] SF25 3-1/2" [89 mm] 27-1/8" [689 mm] 3-1/2" [89 mm] SF28 3-1/2" [89 mm] 30-1/8" [765 mm] 3-1/2" [89 mm] SF31 3-1/2" [89 mm] 33-1/8" [841 mm] 3-1/2" [89 mm] ESF10-3-1/2" [89 mm] 12-1/8" [308 mm] 3-1/2" [89 mm] ESF11-3-1/2" [89 mm] 13-3/8" [340 mm] 3-1/2" [89 mm] ESF13-3-1/2" [89 mm] 15-1/8" [384 mm] 3-1/2" [89 mm] ESF14-3-1/2" [89 mm] 16-1/16" [408 mm] 3-1/2" [89 mm] ESF16-3-1/2" [89 mm] 18-1/8" [460 mm] 3-1/2" [89 mm] ESF19-3-1/2" [89 mm] 21-1/8" [537 mm] 3-1/2" [89 mm] ESF22-3-1/2" [89 mm] 24-1/8" [613 mm] 3-1/2" [89 mm] ESF25-3-1/2" [89 mm] 27-1/8" [689 mm] 3-1/2" [89 mm] ESF28-3-1/2" [89 mm] 30-1/8" [765 mm] 3-1/2" [89 mm] ESF31-3-1/2" [89 mm] 33-1/8" [841 mm] 3-1/2" [89 mm] 46 ownload at > Resource Library

48 Cabinet imensions Minimum Interior oor imensions Cabinet imensions rawer Inserts & Sinks Front Trays eight idth epth POLYMER SINK FRONT TRAYS & INGE KITS (dimensions include hinge kits) PSF8.62S-2-A 3-1/2" [89 mm] 10-1/8" [257 mm] 2-1/2" [64 mm] PSF8.62S-2-3-1/2" [89 mm] 10-1/8" [257 mm] 2-1/2" [64 mm] PSF11-PF-S-2-A 3-1/2" [89 mm] 12-1/2" [318 mm] 2-1/8" [54 mm] PSF11-PF-S-2-3-1/2" [89 mm] 12-1/2" [318 mm] 2-1/8" [54 mm] PSF11S-2-A 3-1/2" [89 mm] 12-1/2" [318 mm] 2-1/2" [64 mm] PSF11S-2-3-1/2" [89 mm] 12-1/2" [318 mm] 2-1/2" [64 mm] PSF14-PF-S-2-A 3-1/2" [89 mm] 15-1/2" [394 mm] 2-1/8" [54 mm] PSF14-PF-S-2-3-1/2" [89 mm] 15-1/2" [394 mm] 2-1/8" [54 mm] PSF14S-2-A 3-1/2" [89 mm] 15-1/2" [394 mm] 2-1/2" [64 mm] PSF14S-2-3-1/2" [89 mm] 15-1/2" [394 mm] 2-1/2" [64 mm] POLYMER SINK FRONT TRAYS (with stops) PSF11-3-1/2" [89 mm] 11-1/2" [292 mm] 3-1/4" [83 mm] PSF14-A 3-1/2" [89 mm] 14-1/2" [368 mm] 3-1/4" [83 mm] PSF14-3-1/2" [89 mm] 14-1/2" [368 mm] 3-1/4" [83 mm] SCISSOR INGES S-1-S/P 4-1/16" [103 mm] 3-1/8" [79 mm] 2-3/8" [60 mm] S /16" [103 mm] 3-1/8" [79 mm] 2-3/8" [60 mm] S /16" [103 mm] 3-1/8" [79 mm] 2-3/8" [60 mm] EURO-TRAY INGES ET--N 3-1/8" [79 mm] 4" [102 mm] 2-3/4" [70 mm] eight idth idth (with Scissor inges) (with Euro-Tray inges) epth POLYMER SINK FRONT TRAYS PSF8.62-A 3-1/2" [89 mm] 10-1/8" [257 mm] 12-7/8" [327 mm] 2-1/2" [64 mm] PSF /2" [89 mm] 10-1/8" [257 mm] 12-7/8" [327 mm] 2-1/2" [64 mm] PSF11-A 3-1/2" [89 mm] 12-1/2" [318 mm] 15-1/4" [387 mm] 2-1/2" [64 mm] PSF11-PF-A 3-1/2" [89 mm] 12-1/2" [318 mm] 15-1/4" [387 mm] 2-1/8" [54 mm] PSF11-PF- 3-1/2" [89 mm] 12-1/2" [318 mm] 15-1/4" [387 mm] 2-1/8" [54 mm] PSF11-3-1/2" [89 mm] 12-1/2" [318 mm] 15-1/4" [387 mm] 2-1/2" [64 mm] PSF11RS-A 3-1/2" [89 mm] 12-1/2" [318 mm] 15-1/4" [387 mm] 2-1/2" [64 mm] PSF11RS- 3-1/2" [89 mm] 12-1/2" [318 mm] 15-1/4" [387 mm] 2-1/2" [64 mm] PSF14-A 3-1/2" [89 mm] 15-1/2" [394 mm] 18-1/4" [464 mm] 2-1/2" [64 mm] PSF14-PF-A 3-1/2" [89 mm] 15-1/2" [394 mm] 18-1/4" [464 mm] 2-1/8" [54 mm] PSF14-PF- 3-1/2" [89 mm] 15-1/2" [394 mm] 18-1/4" [464 mm] 2-1/8" [54 mm] PSF14-3-1/2" [89 mm] 15-1/2" [394 mm] 18-1/4" [464 mm] 2-1/2" [64 mm] PSF14RS-A 3-1/2" [89 mm] 15-1/2" [394 mm] 18-1/4" [464 mm] 2-1/2" [64 mm] PSF14RS- 3-1/2" [89 mm] 15-1/2" [394 mm] 18-1/4" [464 mm] 2-1/2" [64 mm] PSF2425-A 3-1/2" [89 mm] 25-7/8" [657 mm] 28-5/8" [727 mm] 2-1/2" [64 mm] PSF /2" [89 mm] 25-7/8" [657 mm] 28-5/8" [727 mm] 2-1/2" [64 mm] PSF3025-A 3-1/2" [89 mm] 31-15/16" [811 mm] 34-11/16" [881 mm] 2-1/2" [64 mm] PSF /2" [89 mm] 31-15/16" [811 mm] 34-11/16" [881 mm] 2-1/2" [64 mm] EXTRUE SINK FRONT TRAYS (dimensions include P-XSF-EC-20- End Caps) XSF /2" [114 mm] 35-1/2" [902 mm] 38-1/4" [972 mm] 2-7/8" [114 mm] XSF /2" [114 mm] 73-3/4" [1,873 mm] 76-1/2" [1,943 mm] 2-7/8" [114 mm] imensions shown are recommended minimum door opening dimensions. Customer Service:

49 Pull-Out Systems ood & ire...50 ire...54 Specialty...59 Cabinet imensions ownload at > Resource Library

50 Pull-Out Systems Customer Service:

51 Pull-Out Systems ood & ire Pot & Pan Pantry Organizer Mounted to KV precision ball-bearing slides eavy gauge wire frames andle allows for easy opening and closing of unit KV Eco-Friendly Frosted Nickel finish A perfect complement to any Frosted Nickel Pantry Roll-Out (see pages 51 and 55) Six movable hooks (included) have rubber grips that reduce pan sway and allow pot and pan storage to be customized PAN1700TM-FN (extended) S Center-Mount Pantry Roll-Out & Baskets (see opposite page) PAN1700TM-FN PAN1700TM-FN (shown in upper cabinet) See page 62 for recommended cabinet dimensions and clearances. POT & PAN PANTRY ORGANIZER Sliding Assembly idth S 16-7/8" PAN1700TM-FN [429 mm] * Eco-Friendly. See page 4 for more information. Overall Product imensions eight idth epth 19-3/8" [492 mm] 17-3/4" [451 mm] 23 to 24-5/8" [ mm] Finish Frosted Nickel*/ Birch Units per eight per 1 14 lbs. [6.4 kg.] 50 ownload at > Resource Library

52 Center-Mount Pantry Roll-Out & Baskets ood & ire Pull-Out Systems Mounted to KV precision ball-bearing slides KV Eco-Friendly Frosted Nickel finish Center-Mount Baskets (sold separately) mount with four screws (included) Basket height can be varied in 3-3/4" increments Basket platforms are 1/2" thick Birch veneer with a UV-cured clear coat finish P2500CM-FN with BP20CM-FN Full-extension slides Center-Mount Basket (BP14CM-FN shown) BP11CM-FN Center-Mount Pantry Roll-Out (P4650CM-FN shown) Maximum # of Baskets Individual Product imensions eight idth epth Platform [ire/platform] Units per eight per CENTER-MOUNT PANTRY ROLL-OUTS P1875CM-FN /2" 22-1/2" [ mm] 3-13/16" [97 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch lbs. [5.7 kg.] P2500CM-FN /4" 28-3/4" [ mm] 3-13/16" [97 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch lbs. [6.1 kg.] P4250CM-FN 4 P4650CM-FN 5 P5450CM-FN 6 CENTER-MOUNT BASKETS 44" 49-3/8" [1,118 1,254 mm] 48" 53-3/8" [1,219 1,356 mm] 56" 61-3/8" [1,422 1,559 mm] Sliding assembly width is the same as widest basket width. Load capacity not to exceed 100 lbs. * Eco-Friendly. See page 4 for more information. 3-13/16" [97 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch /16" [97 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch /16" [97 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch 1 BP5CM-FN 4-1/8" [105 mm] 5" [127 mm] 20-7/16" [519 mm] Frosted Nickel*/Birch 2 BP8CM-FN 4-1/8" [105 mm] 8" [203 mm] 20-7/16" [519 mm] Frosted Nickel*/Birch 2 BP11CM-FN 4-1/8" [105 mm] 11" [279 mm] 20-7/16" [519 mm] Frosted Nickel*/Birch 2 BP14CM-FN 4-1/8" [105 mm] 14" [356 mm] 20-7/16" [519 mm] Frosted Nickel*/Birch 2 BP17CM-FN 4-1/8" [105 mm] 17" [432 mm] 20-7/16" [519 mm] Frosted Nickel*/Birch 2 BP20CM-FN 4-1/8" [105 mm] 20" [508 mm] 20-7/16" [519 mm] Frosted Nickel*/Birch lbs. [7.1 kg.] 15.9 lbs. [7.2 kg.] 17 lbs. [7.7 kg.] 6.3 lbs. [2.9 kg.] 8.8 lbs. [4.0 kg.] 12.1 lbs. [5.5 kg.] 13.5 lbs. [6.1 kg.] 16 lbs. [7.3 kg.] 17.4 lbs. [7.9 kg.] See page 62 for recommended cabinet dimensions and clearances. Customer Service:

53 Pull-Out Systems ood & ire Slide-Out Base Blind Corner Unit KV Eco-Friendly Frosted Nickel finish Provides easy access to hard-to-reach blind corners Opens by manually pulling each half of the unit out of cabinet in three easy steps KV heavy-duty precision ball-bearing slides Left and Right hand options available Includes four adjustable frosted nickel wire and birch veneer base baskets (11-3/4" wide x 17-3/4" deep) BBCS-R-15-FN (for RIGT blind corner cabinet) Position 1 (closed) Position 2 Blind portion of the cabinet is on the LEFT BBCS-L-15-FN (Position 2) For LEFT base blind corner cabinets (top view) S Cabinet door is on RIGT side of cabinet Position 3 1-1/4" [32 mm] Clearance for Adjacent Cabinet oor Position 4 (fully open) Includes four adjustable frosted nickel wire and birch veneer base baskets (11-3/4" wide x 17-3/4" deep) S Cabinet door is on LEFT side of cabinet BBCS-R-15-FN (Position 2) For RIGT base blind corner cabinets (top view) Blind portion of the cabinet is on the RIGT See page 62 for recommended cabinet dimensions and clearances. Sliding Assembly idth S * Eco-Friendly. See page 4 for more information. Assembled Product imensions eight idth epth Finish Units per eight per SLIE-OUT BASE BLIN CORNER UNITS LEFT BLIN CORNER UNITS BBCS-L-15-FN 14" [356 mm] 19-3/4" [502 mm] 26-3/16" [665 mm] 22-3/16" [564 mm] Frosted Nickel*/ood lbs. [29 kg.] BBCT-L-15-FN 14" [356 mm] 26-3/4" [679 mm] 26-3/16" [665 mm] 22-3/16" [564 mm] Frosted Nickel*/ood lbs. [30.7 kg.] RIGT BLIN CORNER UNITS BBCS-R-15-FN 14" [356 mm] 19-3/4" [502 mm] 26-3/16" [665 mm] 22-3/16" [564 mm] Frosted Nickel*/ood lbs. [29.0 kg.] BBCT-R-15-FN 14" [356 mm] 26-3/4" [679 mm] 26-3/16" [665 mm] 22-3/16" [564 mm] Frosted Nickel*/ood lbs. [30.7 kg.] 52 ownload at > Resource Library

54 Pot & Pan Caddy KV Eco-Friendly Frosted Nickel finish ood & ire Pull-Out Systems Two separate pull-out sections provide flexible pot and pan storage and access Pre-finished Birch veneer platforms with contoured skirting and Frosted Nickel heavy-gauge wire fencing Easy installation with only four screws SPS27-FN (Top and bottom extended) Top & bottom extended S SPS ood & iretray ivider Roll-Outs KV Eco-Friendly Frosted Nickel finish eavy gauge Frosted Nickel wire frames Birch veneer base platform Slides out on heavy-duty, full-extension ball-bearing slides Birch veneer base platform POT & PAN CAY Sliding Assembly idth S Tray ivider Roll-Out (TRO-FN-9 shown) Finish [ire/platform] Units per eight per SPS21-FN 19-1/2" [495 mm] 19-1/2" [495 mm] 14-1/4" [362 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch lbs. [14.8 kg.] SPS27-FN 25-1/2" [648 mm] 25-1/2" [648 mm] 14-1/4" [362 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch lbs. [15.3 kg.] OO & IRE TRAY IVIER ROLL-OUTS TRO Assembled Product imensions idth eight epth TRO-FN-6 5-1/2" [140 mm] 5-1/2" [140 mm] 14" [356 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch lbs. [5.2 kg.] TRO-FN-9 8-1/2" [216 mm] 8-1/2" [216 mm] 14" [356 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch lbs. [6.3 kg.] * Eco-Friendly. See page 4 for more information. S See page 62 for recommended cabinet dimensions and clearances. Customer Service:

55 Pull-Out Systems ire Center-Mount Pantry Roll-Out & Baskets Variety of height ranges available Center-Mount Baskets (sold separately) mount with four screws (included) to the center of Pantry Roll-Out Basket height can be varied in 3-3/4" increments Mounted to KV precision ball-bearing slides P5450CM- Full-extension slides Center-Mount Basket (BP10CM- shown) Center-Mount Basket (BP20CM- shown) Center-Mount Pantry Roll-Out (P5450CM- shown) See page 62 for recommended cabinet dimensions and clearances. Maximum # of Baskets CENTER-MOUNT PANTRY ROLL-OUTS BP20CM- 20" [508 mm] 4-1/8" [105 mm] 20-7/16" [519 mm] hite lbs. [6.5 kg.] Sliding assembly width is same as widest basket width. Load capacity not to exceed 100 lbs. Finish Units per eight per P1875CM /16" [97 mm] 20-1/2" 22-1/2" [ mm] 22-1/4" [565 mm] hite lbs. [5.5 kg.] P2500CM /16" [97 mm] 26-3/4" 28-3/4" [ mm] 22-1/4" [565 mm] hite lbs. [6.2 kg.] P4250CM /16" [97 mm] 44" 49-3/8" [1,118 1,254 mm] 22-1/4" [565 mm] hite lbs. [8.5 kg.] P4650CM /16" [97 mm] 48" 53-3/8" [1,219 1,356 mm] 22-1/4" [565 mm] hite lbs. [8.8 kg.] P5450CM /16" [97 mm] 56" 61-3/8" [1,422 1,559 mm] 22-1/4" [565 mm] hite lbs. [9.3 kg.] CENTER-MOUNT BASKETS Individual Product imensions idth eight epth BP5CM- 5" [127 mm] 4-1/8" [105 mm] 20-7/16" [519 mm] hite lbs. [3.1 kg.] BP8CM- 8" [203 mm] 4-1/8" [105 mm] 20-7/16" [519 mm] hite lbs. [3.8 kg.] BP11CM- 11" [279 mm] 4-1/8" [105 mm] 20-7/16" [519 mm] hite lbs. [4.4 kg.] BP14CM- 14" [356 mm] 4-1/8" [105 mm] 20-7/16" [519 mm] hite lbs. [5.2 kg.] BP17CM- 17" [432 mm] 4-1/8" [105 mm] 20-7/16" [519 mm] hite lbs. [5.8 kg.] 54 ownload at > Resource Library

56 Side-Mount Pantry Roll-Out & Baskets KV Eco-Friendly Frosted Nickel finish or hite Basket height can be varied in 4" increments Side-Mount Baskets (sold separately) mount to hooks on side of Side-Mount Pantry Roll-Out ire Pull-Out Systems 3-1/4" [83 mm] eight Full-extension slides P5450FE-FN with BP10-FN Side-Mount Pantry Roll-Out (P5450FE shown) SIE-MOUNT PANTRY ROLL-OUTS Side-Mount Basket (Sold separately.) idth Finish SIE-MOUNT BASKETS For epth & eight, see drawing to left. Individual Product imensions idth eight epth Units per eight per BP4-FN 4" [102 mm] Frosted Nickel* lbs. [6.2 kg.] BP5-FN 5" [127 mm] Frosted Nickel* lbs. [6.8 kg.] BP6-FN 6" [152 mm] Frosted Nickel* lbs. [7.3 kg.] BP7-FN 7" [178 mm] Frosted Nickel* lbs. [8.0 kg.] BP8-FN 8" [203 mm] Frosted Nickel* lbs. [8.4 kg.] BP9-FN 9" [229 mm] Frosted Nickel* lbs. [8.9 kg.] BP10-FN 10" [254 mm] Frosted Nickel* lbs. [9.5 kg.] BP12-FN 12" [305 mm] Frosted Nickel* lbs. [11.9 kg.] BP4-4" [102 mm] hite lbs. [6.2 kg.] BP5-5" [127 mm] hite lbs. [6.8 kg.] BP6-6" [152 mm] hite lbs. [7.3 kg.] BP7-7" [178 mm] hite lbs. [8.0 kg.] BP8-8" [203 mm] hite lbs. [8.4 kg.] BP9-9" [229 mm] hite lbs. [8.9 kg.] BP10-10" [254 mm] hite lbs. [9.5 kg.] BP12-12" [305 mm] hite lbs. [11.9 kg.] Finish Units per eight per P4250FE-FN 3-13/16" [97 mm] 44" 49-3/8" [1,118 1,254 mm] 22-1/4" [565 mm] Frosted Nickel* lbs. [8.4 kg.] P4650FE-FN 3-13/16" [97 mm] 48" 53-3/8" [1,219 1,356 mm] 22-1/4" [565 mm] Frosted Nickel* lbs. [8.8 kg.] P5450FE-FN 3-13/16" [97 mm] 56" 61-3/8" [1,422 1,559 mm] 22-1/4" [565 mm] Frosted Nickel* lbs. [9.4 kg.] P425OFE- 3-13/16" [97 mm] 44" 49-3/8" [1,118 1,254 mm] 22-1/4" [565 mm] hite lbs. [8.5 kg.] P4650FE- 3-13/16" [97 mm] 48" 53-3/8" [1,219 1,356 mm] 22-1/4" [565 mm] hite lbs. [9.0 kg.] P5050FE- 3-13/16" [97 mm] 52" 57-3/8" [1,321 1,457 mm] 22-1/4" [565 mm] hite 1 20 lbs. [9.1 kg.] P5450FE- 3-13/16" [97 mm] 56" 61-3/8" [1,422 1,559 mm] 22-1/4" [565 mm] hite lbs. [9.5 kg.] P6500FE- 3-13/16" [97 mm] 66-1/2" 71-7/8" [1,689 1,826 mm] 22-1/4" [565 mm] hite lbs. [10.2 kg.] Sliding assembly width is equal to Pantry Roll-Out width plus total width of baskets being applied. Load capacity not to exceed 100 lbs. * Eco-Friendly. See page 4 for more information. 21-1/2" [546 mm] epth Side-Mount Basket (BP6- shown) See page for recommended cabinet dimensions and clearances. Customer Service:

57 Pull-Out Systems ire Base Cabinet Organizer Features six vertical Side-Mount Basket positions (BCO20E- has two vertical basket positions. Side-Mount Baskets sold separately on page 55.) Basket height can be varied in 3-3/4" increments 75 lb. class rated, bi-directional slides are non-handed BC020E- with BP6- Side-Mount Baskets (Sold separately. See pg. 55.) Base Cabinet Organizer (BCO2456- shown) See page 63 for recommended cabinet dimensions and clearances. BASE CABINET ORGANIZER Sliding Assembly idth S BCO2OE- ** BCO2456- *** Assembled Product imensions idth eight epth 1-1/2" [38 mm] 1-3/8" [35 mm] 21-3/16" [538 mm] 25" [635 mm] ** Total sliding assembly width is equal to total width of Side-Mount Basket application plus 15/16" [24 mm]. *** Total sliding assembly width is equal to total width of Side-Mount Basket application plus 1-3/8" [35 mm] /16" [551 mm] 22" [559 mm] Finish Units per hite 1 hite 1 eight per 6.1 lbs. [2.8 kg.] 5.8 lbs. [2.6 kg.] 56 ownload at > Resource Library

58 Base Roll-Out Four Side-Mount Basket positions per side (Side-Mount Baskets sold separately. See page 55.) Basket height can be varied in 3-3/4" increments ire Pull-Out Systems B1700- with BP4- and BP6- S Base Roll-Out (B1700- shown) Side-Mount Baskets (Sold separately. See pg. 55.) Tray ivider Roll-Outs KV epoxy-coated roller slides Sliding base assembly is 1/2"-thick laminated melamine mounted on epoxy-coated slides and is fully assembled eavy-gauge steel wire partitions section off storage areas TRO9- BASE ROLL-OUT Sliding Assembly idth S Assembled Product imensions idth eight epth B /4" [171 mm]* 7-9/16" [192 mm] 19-1/4" [489 mm] 21-11/16" [551 mm] hite 1 TRAY IVIER ROLL-OUTS Tray ivider Roll-Out (TRO9- shown) TR06-5-7/16" [138 mm] 6" [152 mm] 19-1/2" [495 mm] 22" [559 mm] hite 1 TR09-8-7/16" [214 mm] 9" [229 mm] 19-1/2" [495 mm] 22" [559 mm] hite 1 * Total sliding assembly width is equal to total width of Side-Mount Basket application plus 5/8" [16 mm]. S Finish Units per eight per 7.0 lbs. [3.2 kg.] 9.0 lbs. [4.1 kg.] 11.9 lbs. [5.4 kg.] See page 63 for recommended cabinet dimensions and clearances. Customer Service:

59 Pull-Out Systems ire Multi-Use Baskets KV Eco-Friendly Frosted Nickel finish KV epoxy-coated roller slide Accessory and Upper Baskets are non-handed, removable and offset to avoid plumbing for undersink applications Removable Accessory Basket Fixed andle Full-Extension Slides Multi-Use Basket (MUB14-FN shown) eavy-gauge ire S Multi-Use Basket with andle & Upper Basket (USB shown) Multi-Use Basket (MUB shown) S LOER BASKET IMENSIONS UPPER BASKET IMENSIONS idth eight epth idth eight epth GUSB11-FN 11" 4" 18" 5" 2-7/8" 17-1/2" GUSB14-FN 14" 4" 18" 5" 2-7/8" 17-1/2" USB11-11" 4-1/8" 18-3/4" 5" 2-7/8" 17-3/8" USB14-14" 4-1/8" 18-3/4" 5" 2-7/8" 17-3/8" Multi-Use Basket with Upper Basket (USB11-TM- shown) USB11TM- 11" 4-1/8" 18" USB14TM- 14" 4-1/8" 18" MU11-11" 4-1/8" 18-3/4" MU14-14" 4-1/8" 18-3/4" See page 63 for recommended cabinet dimensions and clearances. Sliding Assembly idth S MULTI-USE BASKETS IT ANLE AN ACCESSORY BASKET * See page 4 for Frosted Nickel information. Assembled Product imensions idth eight epth Finish Units per eight per GUSB11-FN 11-7/16" [291 mm] 12-1/8" [308 mm] 15-7/16" [392 mm] 18-3/4" [476 mm] Frosted Nickel* lbs. [4.0 kg.] GUSB14-FN 14-7/16" [367 mm] 15-1/8" [384 mm] 15-7/16" [392 mm] 18-3/4" [476 mm] Frosted Nickel* lbs. [4.4 kg.] USB /16" [291 mm] 12-1/8" [308 mm] 15-1/2" [394 mm] 18-3/4" [476 mm] hite lbs. [3.4 kg.] USB /16" [367 mm] 15-1/8" [384 mm] 15-1/2" [394 mm] 18-3/4" [476 mm] hite lbs. [3.7 kg.] MULTI-USE BASKETS IT UPPER BASKET USB11TM- 11-7/16" [291 mm] 12-1/8" [308 mm] 9-5/16" [237 mm] 19-1/8" [486 mm] hite lbs. [2.8 kg.] USB14TM- 14-7/16" [367 mm] 15-1/8" [384 mm] 9-5/16" [237 mm] 19-1/8" [486 mm] hite lbs. [3.3 kg.] MULTI-USE BASKETS MUB11-FN 11-3/8" [289 mm] 11-3/4" [299 mm] 5-5/16" [135 mm] 20" [508 mm] Frosted Nickel* lbs. [3.9 kg.] MUB14-FN 14-3/8" [365 mm] 14-3/4" [375 mm] 5-5/16" [135 mm] 20" [508 mm] Frosted Nickel* lbs. [4.3 kg.] MUB17-FN 17-3/8" [441 mm] 17-3/8" [441 mm] 5-3/16" [132 mm] 20" [508 mm] Frosted Nickel* 1 11 lbs. [4.9 kg.] MU /16" [291 mm] 12-1/8" [308 mm] 5-3/16" [132 mm] 18-3/4" [476 mm] hite lbs. [2.2 kg.] MU /16" [367 mm] 15-1/8" [384 mm] 5-3/16" [132 mm] 18-3/4" [476 mm] hite lbs. [2.6 kg.] 58 ownload at > Resource Library

60 Specialty Pull-Out Systems Appliance Lift Kitchen appliances raise effortlessly with a gas cylinder assist and then lock securely into place Can be outfitted with a custom block platform or a quality KV pre-made maple wood platform Lift can be positioned at two different levels: flush with counter or 2" below counter 1/2" [13 mm] 13" [330 mm] Upper Face Frame AL-20 with AL (up position) 23-61/64" [608 mm] 1/2" [13 mm] 16" [406 mm] 1/2" [13 mm] Face Frame NOTE: Install 1/2" down and 1/2" back from upper Face Frame (as shown) Platform (AL or AL16.5-1) AL-20 with AL (down position) escription idth eight epth Finish APPLIANCE LIFT PARTS AL-20 AL AL AL-BSKT AL-BSKT (Accessory Basket) ardware Mechanism (left and right arm) 13-1/2" Maple Block Platform 16-1/2" Maple Block Platform Accessory Basket Platform Surface + 2-1/2" [64 mm] 13-1/2" [343 mm] 16-1/2" [419 mm] 9-7/8" [251 mm] 23-61/64" [608 mm] 1-1/2" [38 mm] 1-1/2" [38 mm] 4-7/8" [124 mm] AL-BSKT (Accessory Basket mounts under platform) Maximum of 13" [330 mm] or Platform epth 18" [457 mm] 18" [457 mm] 12-7/8" [327 mm] Pull up on right and left mechanism handles to unlock and lower Appliance Lift Units per Platinum 1 Maple 1 Maple 1 Black/Birch 1 AL-20 (ardware Mechanism) eight per 13.7 lbs. [6.2 kg.] 9.9 lbs. [4.5 kg.] 12.3 lbs. [5.6 kg.] 4.2 lbs. [1.9 kg.] See page 62 for recommended cabinet dimensions and clearances. Customer Service:

61 Pull-Out Systems Specialty ampers amper is removable (except Tilt-Out hampers) (See page 14 for Roll-Out plastic hamper replacement bin information.) Aerated plastic and open wire frame hampers make laundry storage easy Roll-Out Plastic amper (PS shown) KV 1" over-travel heavy-duty precision ball-bearing slides Roll-Out Plastic amper (PS shown) S QT60PB- (See page 14 for Replacement Bin information) KV epoxy-coated roller slides Roll-Out ire amper (1515- shown) esigned for bottomhinged cabinet door (hinge not supplied) Tilt-Out ire amper (T shown) S Assembly idth S Assembled Product imensions idth eight epth Finish Capacity per Bin Number of Bins Units per eight per ROLL-OUT PLASTIC AMPER See page 62 for recommended cabinet dimensions and clearances. PS /16" [364 mm] 15-1/8" [384 mm] 21-1/16" [535 mm] 19-1/8" [486 mm] hite 60 qt lbs. [5.4 kg.] PMS * 14-5/16" [364 mm] 15-1/8" [384 mm] 21-1/16" [535 mm] 19-1/8" [486 mm] hite 60 qt lbs. [6.2 kg.] ROLL-OUT IRE AMPER /16" [291 mm] 12-1/8" [308 mm] 14-5/8" [371 mm] 18-3/4" [476 mm] hite 40 qt lbs. [3.7 kg.] /16" [291 mm] 12-1/8" [308 mm] 18-7/8" [479 mm] 18-3/4" [476 mm] hite 53 qt lbs. [4.1 kg.] /16" [367 mm] 15-1/8" [384 mm] 14-5/8" [371 mm] 18-3/4" [476 mm] hite 53 qt lbs. [4.2 kg.] /16" [367 mm] 15-1/8" [384 mm] 18-7/8" [479 mm] 18-3/4" [476 mm] hite 71 qt lbs. [5.0 kg.] M /16" [291 mm] 12-1/8" [308 mm] 14-5/8" [371 mm] 16" [406 mm] hite 33 qt lbs. [3.2 kg.] TILT-OUT IRE AMPER TO /2" [267 mm] 10-1/2" [267 mm] 17-3/4" [451 mm] 18-13/16" [478 mm] hite 39 qt lbs. [2.8 kg.] TO /2" [267 mm] 10-1/2" [267 mm] 17-3/4" [451 mm] 18-13/16" [478 mm] hite 39 qt lbs. [19.4 kg.] TO /2" [343 mm] 13-1/2" [343 mm] 17-3/4" [451 mm] 18-13/16" [478 mm] hite 52 qt lbs. [3.4 kg.] TO /2" [343 mm] 13-1/2" [343 mm] 17-3/4" [451 mm] 18-13/16" [478 mm] hite 52 qt lbs. [21.8 kg.] TO /2" [419 mm] 16-1/2" [419 mm] 17-3/4" [451 mm] 18-13/16" [478 mm] hite 65 qt lbs. [3.9 kg.] TO /2" [419 mm] 16-1/2" [419 mm] 17-3/4" [451 mm] 18-13/16" [478 mm] hite 65 qt lbs. [19.0 kg.] *Includes door-mounting hardware for 1-1/2" face frame cabinetry. 60 ownload at > Resource Library

62 Specialty Pull-Out Systems Pull-Out Towel Bar Pull-Out Towel Bar has three bars that pull out together on a friction-free ball-bearing carrier Mounts to right or left side of cabinet Pull-Out Towel Bar (P793 ANO) Pull-Out Towel Bar (P793 ANO) Bars pull out together Pull-Out Towel Bar (P793 ANO) PULL-OUT TOEL BAR Sliding Assembly idth Assembled Product imensions idth eight epth Finish Units per eight per P793 ANO 4-13/16" [122 mm] 4-13/16" [122 mm] 1-5/16" [33 mm] 17-3/4" [451 mm] Anochrome lbs. [10.6 kg] See page 62 for recommended cabinet dimensions and clearances. Customer Service:

63 Pull-Out Systems Cabinet imensions Cabinet imensions Min. Cabinet Opening Minimum Interior Cabinet imensions Minimum Cabinet Clearances idth O idth eight epth Front F Back B Slide-Out Base Blind Corner Units BBCS-L-15-FN 14-1/2" [368 mm] 26-11/16" [678 mm] 20-1/4" [514 mm] 22-11/16" [576 mm] 1/4" [6 mm] 1/4" [6 mm] BBCT-L-15-FN 14-1/2" [368 mm] 26-11/16" [678 mm] 27-1/4" [692 mm] 22-11/16" [576 mm] 1/4" [6 mm] 1/4" [6 mm] BBCS-R-15-FN 14-1/2" [368 mm] 26-11/16" [678 mm] 20-1/4" [514 mm] 22-11/16" [576 mm] 1/4" [6 mm] 1/4" [6 mm] BBCT-R-15-FN 14-1/2" [368 mm] 26-11/16" [678 mm] 27-1/4" [692 mm] 22-11/16" [576 mm] 1/4" [6 mm] 1/4" [6 mm] Center-Mount Pantry Roll-Outs P1875CM-FN * * 20-1/2" [520 mm] 22-1/4" [565 mm] P2500CM-FN * * 26-3/4" [679 mm] 22-1/4" [565 mm] P4250CM-FN * * 44" [1,117 mm] 22-1/4" [565 mm] P4650CM-FN * * 48" [1,219 mm] 22-1/4" [565 mm] P5450CM-FN * * 56" [1,422 mm] 22-1/4" [565 mm] Pot & Pan Pantry Organizer PAN1700TM-FN 17-1/2" [444 mm] 17-1/2" [444 mm] 19-3/8" [492 mm] 23-3/4" [603 mm] 1/2" [13 mm] Pot & Pan Caddy SPS21-FN 20" [508 mm] 20" [508 mm] 14-3/4" [375 mm] 22-3/4" [578 mm] 1/4" [6 mm] 1/4" [6 mm] SPS27-FN 26" [660 mm] 26" [660 mm] 14-3/4" [375 mm] 22-3/4" [578 mm] 1/4" [6 mm] 1/4" [6 mm] ood & ire Tray ivider Roll-Outs TRO-FN-6 6" [152 mm] 6" [152 mm] 14-1/2" [368 mm] 22-3/4" [578 mm] 1/4" [6 mm] 1/4" [6 mm] TRO-FN-9 9" [229 mm] 9" [229 mm] 14-1/2" [368 mm] 22-3/4" [578 mm] 1/4" [6 mm] 1/4" [6 mm] Appliance Lift (see page 59 for additional clearances) AL-20 Platform idth + 1" [25 mm] Platform idth + 2-1/2" [64 mm] 25" [634 mm] Minimum of 16-1/2" [419 mm] OR platform depth 1/2" [13 mm] 1/2" [13 mm] ampers PS " [381 mm] 15-5/8" [397 mm] 21-9/16" [548 mm] 19-5/8" [498 mm] 1/4" [6 mm] 1/4" [6 mm] PMS " [381 mm] 15-5/8" [397 mm] 21-9/16" [548 mm] 19-5/8" [498 mm] 1/4" [6 mm] 1/4" [6 mm] " [305 mm] 12-5/8" [321 mm] 15-1/8" [384 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] " [305 mm] 12-5/8" [321 mm] 19-3/8" [492 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] " [381 mm] 15-5/8" [397 mm] 15-1/8" [384 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] " [381 mm] 15-5/8" [397 mm] 19-3/8" [492 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] M " [305 mm] 12-5/8" [321 mm] 15-1/8" [384 mm] 16-1/2" [419 mm] 1/4" [6 mm] 1/4" [6 mm] TO " [279 mm] 11" [279 mm] 18-1/4" [464 mm] 19-5/16" [491 mm] 1/4" [6 mm] 1/4" [6 mm] TO " [279 mm] 11" [279 mm] 18-1/4" [464 mm] 19-5/16" [491 mm] 1/4" [6 mm] 1/4" [6 mm] TO " [356 mm] 14" [356 mm] 18-1/4" [464 mm] 19-5/16" [491 mm] 1/4" [6 mm] 1/4" [6 mm] TO " [356 mm] 14" [356 mm] 18-1/4" [464 mm] 19-5/16" [491 mm] 1/4" [6 mm] 1/4" [6 mm] TO " [432 mm] 17" [432 mm] 18-1/4" [464 mm] 19-5/16" [491 mm] 1/4" [6 mm] 1/4" [6 mm] TO " [432 mm] 17" [432 mm] 18-1/4" [464 mm] 19-5/16" [491 mm] 1/4" [6 mm] 1/4" [6 mm] Pull-Out Towel Bar P79 3 ANO 5-5/16" [135 mm] 5-5/16" [135 mm] 1-13/16" [46 mm] 18-1/4" [464 mm] 1/4" [6 mm] 1/4" [6 mm] Center-Mount Pantry Roll-Out P1875CM- * * 20-1/2" [520 mm] 22-1/4" [565 mm] P2500CM- * * 26-3/4" [670 mm] 22-1/4" [565 mm] P4250CM- * * 44" [1,117 mm] 22-1/4" [565 mm] P4650CM- * * 48" [1,219 mm] 22-1/4" [565 mm] P5450CM- * * 56" [1,422 mm] 22-1/4" [565 mm] Side-Mount Pantry Roll-Out P425OFE- * * 44" [1,117 mm] 22-1/4" [565 mm] P4650FE- * * 48" [1,219 mm] 22-1/4" [565 mm] * Minimum Cabinet Opening idth AN Minimum Cabinet Interior idth equals total width of completely assembled unit with all baskets applied, plus 1/2" clearance per side (1" total clearance for center-mounted units, 1/2" side clearance for side-mounted units). imensions shown are recommended minimum cabinet dimensions and clearances. 62 ownload at > Resource Library

64 Cabinet imensions Pull-Out Systems P5050FE- * * 52" [1320 mm] 22-1/4" [565 mm] P5450FE- * * 56" [1422 mm] 22-1/4" [565 mm] P6500FE- * * 66-1/2" [1689 mm] 22-1/4" [565 mm] P4250FE-FN * * 44" [1117 mm] 22-1/4" [565 mm] P4650FE-FN * * 48 [1219 mm] 22-1/4" [565 mm] P5450FE-FN * * 56" [1422 mm] 22-1/4" [565 mm] Base Cabinet Organizer BCO2OE- * * 21-11/16" [551 mm] 22-3/16" [564 mm] 1/4" [6 mm] 1/4" [6 mm] BCO2456- * * 25-1/2" [648 mm] 22-1/2" [572 mm] 1/4" [6 mm] 1/4" [6 mm] Base Roll-Out B1700- * * 19-3/4" [502 mm] 22-3/16" [564 mm] 1/4" [6 mm] 1/4" [6 mm] Multi-Use Baskets GUSB11-FN 12" [305 mm] 12-5/8" [321 mm] 15-15/16" [405 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] GUSB14-FN 15" [381 mm] 15-5/8" [397 mm] 15-15/16" [405 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] USB11-12" [305 mm] 12-5/8" [321 mm] 16" [406 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] USB14-15" [381 mm] 15-5/8" [397 mm] 16" [406 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] USB11TM- 12" [305 mm] 12-5/8" [321 mm] 9-13/16" [249 mm] 19-5/8" [498 mm] 1/4" [6 mm] 1/4" [6 mm] USB14TM- 15" [381 mm] 15-5/8" [397 mm] 9-13/16" [249 mm] 19-5/8" [498 mm] 1/4" [6 mm] 1/4" [6 mm] MUB11-FN 11-1/2" [292 mm] 12" [305 mm] 5-11/16" [144 mm] 20-1/4" [514 mm] 1/4" [6 mm] 1/4" [6 mm] MUB14-FN 14-1/2" [368 mm] 15" [381 mm] 5-11/16" [144 mm] 20-1/4" [514 mm] 1/4" [6 mm] 1/4" [6 mm] MUB17-FN 17-1/2" [444 mm] 18" [457 mm] 5-11/16" [144 mm] 20-1/4" [514 mm] 1/4" [6 mm] 1/4" [6 mm] MU11-12" [305 mm] 12-5/8" [321 mm] 5-11/16" [144 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] MU14-15" [381 mm] 15-5/8" [397 mm] 5-11/16" [144 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] Tray ivider Roll-Outs TR06-6" [152 mm] 6-1/2" [165 mm] 20" [508 mm] 22-1/2" [572 mm] 1/4" [6 mm] 1/4" [6 mm] TR09-9" [229 mm] 9-1/2" [241 mm] 20" [508 mm] 22-1/2" [572 mm] 1/4" [6 mm] 1/4" [6 mm] Example of Frameless / Euro-Style Cabinet Application B rawer F Product Top View Front View Product 1/2" [13 mm] (oes not apply to top-mounted Pantry Roll-Out units.) Cabinet Frame O 1/4" [6 mm]** 1/4" [6 mm]** Example of Face Frame Cabinet Application B rawer F Product Top View Front View Product 1/2" [13 mm] (oes not apply to top-mounted Pantry Roll-Out units.) Face Frame Face Frame O 1/4" [6 mm]** 1/4" [6 mm]** * Minimum Cabinet Opening idth AN Minimum Cabinet Interior idth equals total width of completely assembled unit with all baskets applied, plus 1/2" clearance per side (1" total clearance for center-mounted units, 1/2" side clearance for side-mounted units). imensions shown are recommended minimum cabinet dimensions and clearances. ** Slide-out Base Blind Corner Units and Base Cabinet Organizers require 1/2" side clearance on one side, not both. Customer Service:

65 Specialty Storage ine Accessories...66 Spice Racks...67 ire Accessories...68 Cabinet imensions ownload at > Resource Library

66 Specialty Storage Customer Service:

67 Specialty Storage ine Accessories ine Accessories KV Eco-Friendly Frosted Nickel finish Economical and elegant wine and stemware displays Two racks are required for ine Rack installation, one in front and one parallel in back ine Rack (R41.62-FN shown) ine Rack (R23.62-FN shown) Stemware older (ST11.50-FN shown) Stemware older (ST11.50-FN shown) Stemware older See page 71 for recommended cabinet dimensions and clearances. INE RACKS *Total product depth is dependent upon positioning of front and back pieces. ** Eco-Friendly. See page 4 for more information. Number of Rings Finish Units per eight per R23.62-FN 23-5/8" [600 mm] 4-1/4" [108 mm] * 5 Frosted Nickel** 5 pair 12 lbs. [5.4 kg.] R29.62-FN 29-5/8" [752 mm] 4-1/4" [108 mm] * 6 Frosted Nickel** 5 pair 17 lbs. [7.7 kg.] R35.62-FN 35-5/8" [905 mm] 4-1/4" [108 mm] * 7 Frosted Nickel** 5 pair 17 lbs. [7.7 kg.] R41.62-FN 41-5/8" [1057 mm] 4-1/4" [108 mm] * 9 Frosted Nickel** 5 pair 20.6 lbs. [9.3 kg.] STEMARE OLERS Individual Product imensions idth eight epth ST11.50-B 4" [102 mm] 2" [51 mm] 11-9/16" [294 mm] Brass-Look lbs. [1.6 kg.] ST11.50-FN 4" [102 mm] 2" [51 mm] 11-9/16" [294 mm] Frosted Nickel** lbs. [1.6 kg.] 66 ownload at > Resource Library

68 Spice Racks Specialty Storage Spice Racks KV Eco-Friendly Frosted Nickel finish or hite Bottom tier is 3-9/16" deep to accomodate larger items Top three tiers are 2-11/16" [68 mm] deep SR12-FN Bottom tier is 3-9/16" [90 mm] deep SR15- SPICE RACKS Assembled Product imensions idth eight epth Finish [ire/platform] Units per eight per SR12-FN 7-13/16" [198 mm] 20" [508 mm] 3-7/8" [98 mm] Frosted Nickel* lbs. [5.6 kg.] SR12-1-FN 7-13/16" [198 mm] 20" [508 mm] 3-7/8" [98 mm] Frosted Nickel* lbs. [1.1 kg.] SR15-FN 10-13/16" [275 mm] 20" [508 mm] 3-7/8" [98 mm] Frosted Nickel* lbs. [6.0 kg.] SR15-1-FN 10-13/16" [275 mm] 20" [508 mm] 3-7/8" [98 mm] Frosted Nickel* lbs. [1.1 kg.] SR18-FN 13-13/16" [351 mm] 20" [508 mm] 3-7/8" [98 mm] Frosted Nickel* lbs. [6.7 kg.] SR18-1-FN 13-13/16" [351 mm] 20" [508 mm] 3-7/8" [98 mm] Frosted Nickel* lbs. [1.5 kg.] SR /16" [198 mm] 20" [508 mm] 3-7/8" [98 mm] hite lbs. [5.6 kg.] SR /16" [198 mm] 20" [508 mm] 3-7/8" [98 mm] hite lbs. [1.1 kg.] SR /16" [275 mm] 20" [508 mm] 3-7/8" [98 mm] hite lbs. [6.0 kg.] SR /16" [275 mm] 20" [508 mm] 3-7/8" [98 mm] hite lbs. [1.1 kg.] SR /16" [351 mm] 20" [508 mm] 3-7/8" [98 mm] hite lbs. [6.7 kg.] SR /16" [351 mm] 20" [508 mm] 3-7/8" [98 mm] hite lbs. [1.4 kg.] * Eco-Friendly. See page 4 for more information. See page 71 for recommended cabinet dimensions and clearances. Customer Service:

69 Specialty Storage ire Accessories oor-mount Towel Bar KV Eco-Friendly Frosted Nickel finish or hite Three-tiered oor-mount Towel Bar installs easily with two screws and offers a simple solution to storing and accessing dish towels TB- Utility Rack ire basket with attached towel rack is ideal for storing cleaning supplies in sink base cabinets UT9- See page 71 for recommended cabinet dimensions and clearances. OOR-MOUNT TOEL BAR * Eco-Friendly. See page 4 for more information. Assembled Product imensions idth eight epth Finish Units per eight per TB /16" [316 mm] 5-1/2" [140 mm] 3-3/8" [86 mm] hite lbs. [0.1 kg.] TB- 12-7/16" [316 mm] 5-1/2" [140 mm] 3-3/8" [86 mm] hite lbs. [1.3 kg.] TB-FN 12-7/16" [316 mm] 5-1/2" [140 mm] 3-3/8" [86 mm] Frosted Nickel* lbs. [1.3 kg.] UTILITY RACK UT9-9-9/16" [243 mm] 9" [229 mm] 5-15/16" [151 mm] hite lbs. [4.2 kg.] 68 ownload at > Resource Library

70 ire Accessories Specialty Storage Tray ivider KV Eco-Friendly Frosted Nickel finish or hite Available in 12" and 18" heights Installs easily with four attachment clips T12-FN Iron older KV Eco-Friendly Frosted Nickel finish or hite Can be installed on cabinet door above or below ironing board so iron will be readily available Conveniently stores iron when not in use I-FN TRAY IVIER Finish [ire/bin] Units per eight per T12-1-FN 15/16" [24 mm] 12" [205 mm] 19-1/2" [495 mm] Frosted Nickel* 1 2 lbs. [0.9 kg.] T12-FN 15/16" [24 mm] 12" [205 mm] 19-1/2" [495 mm] Frosted Nickel* lbs. [6.4 kg.] T18-1-FN 15/16" [24 mm] 18" [457 mm] 19-1/2" [495 mm] Frosted Nickel* lbs. [1.0 kg.] T18-FN 15/16" [24 mm] 18" [457 mm] 19-1/2" [495 mm] Frosted Nickel* lbs. [7.8 kg.] T /16" [24 mm] 12" [205 mm] 19-1/2" [495 mm] hite lbs. [0.9 kg.] T12-15/16" [24 mm] 12" [205 mm] 19-1/2" [495 mm] hite lbs. [6.4 kg.] T /16" [24 mm] 18" [457 mm] 19-1/2" [495 mm] hite lbs. [1.0 kg.] T18-15/16" [24 mm] 18" [457 mm] 19-1/2" [495 mm] hite lbs. [7.8 kg.] IRON OLER Assembled Product imensions idth eight epth I-FN 8-1/8" [206 mm] 8-5/16" [211 mm] 5-1/8" [130 mm] Frosted Nickel* lbs. [0.4 kg.] * Eco-Friendly. See page 4 for more information. See page 71 for recommended cabinet dimensions and clearances. Customer Service:

71 Specialty Storage ire Accessories Grooming Rack KV Eco-Friendly Frosted Nickel finish oor-mounted rack provides storage for one hand-held hair dryer, two cans of hair spray and two curling irons GR12-FN Toilet Paper older olds 4 rolls and mounts to doors or walls Installs easily with two screws See page 71 for recommended cabinet dimensions and clearances. GROOMING RACK * Eco-Friendly. See page 4 for more information. TP-531- Assembled Product imensions idth eight epth Finish Units per eight per GR12-FN 9-3/16" [233 mm] 16-1/2" [419 mm] 5-1/4" [133 mm] Frosted Nickel* lbs. [1.0 kg.] TOILET PAPER OLERS TP /8" [137 mm] 16" [406 mm] 5-1/2" [140 mm] hite lbs. [0.6 kg.] 70 ownload at > Resource Library

72 Cabinet imensions Cabinet imensions Specialty Storage Minimum Interior Cabinet OR oor Opening imensions idth eight epth INE RACKS R23.62-FN 23-7/8" [606 mm] 5-1/16" [129 mm] R29.62-FN 29-7/8" [759 mm] 5-1/16" [129 mm] R35.62-FN 35-7/8" [911 mm] 5-1/16" [129 mm] R41.62-FN 41-7/8" [1,064 mm] 5-1/16" [129 mm] STEMARE OLERS ST11.50-B 4-1/2" [114 mm] 2-1/2" [64 mm] 11-13/16" [300 mm] ST11.50-FN 4-1/2" [114 mm] 2-1/2" [64 mm] 11-13/16" [300 mm] SPICE RACKS SR12-FN 9-5/8" [244 mm] 20-1/2" [521 mm] 4-1/8" [105 mm] SR12-1-FN 9-5/8" [244 mm] 20-1/2" [521 mm] 4-1/8" [105 mm] SR15-FN 12-3/8" [314 mm] 20-1/2" [521 mm] 4-1/8" [105 mm] SR15-1-FN 12-3/8" [314 mm] 20-1/2" [521 mm] 4-1/8" [105 mm] SR18-FN 15" [381 mm] 20-1/2" [521 mm] 4-1/8" [105 mm] SR18-1-FN 15" [381 mm] 20-1/2" [521 mm] 4-1/8" [105 mm] SR12-9-5/8" [244 mm] 20-1/2" [521 mm] 4-1/8" [105 mm] SR /8" [244 mm] 20-1/2" [521 mm] 4-1/8" [105 mm] SR /8" [314 mm] 20-1/2" [521 mm] 4-1/8" [105 mm] SR /8" [314 mm] 20-1/2" [521 mm] 4-1/8" [105 mm] SR18-15" [381 mm] 20-1/2" [521 mm] 4-1/8" [105 mm] SR " [381 mm] 20-1/2" [521 mm] 4-1/8" [105 mm] OOR-MOUNT TOEL BARS TB /16" [329 mm] 6" [152 mm] 3-5/8" [92 mm] TB-FN 12-15/16" [329 mm] 6" [152 mm] 3-5/8" [92 mm] TB /16" [329 mm] 6" [152 mm] 3-5/8" [92 mm] UTILITY RACK UT9-11-3/4" [298 mm] 9-1/2" [241 mm] 6-3/16" [157 mm] TRAY IVIERS T12-1-FN 12-3/8" [314 mm] 20-1/8" [511 mm] T12-FN 12-3/8" [314mm] 20-1/8" [511 mm] T18-1-FN 18-3/8" [467mm] 20-1/8" [511 mm] T18-FN 18-3/8" [467mm] 20-1/8" [511 mm] T /8" [314mm] 20-1/8" [511 mm] T /8" [314mm] 20-1/8" [511 mm] T /8" [467mm] 20-1/8" [511 mm] T /8" [467mm] 20-1/8" [511 mm] IRON OLER I-FN 8-5/8" [219 mm] length of iron + 1-1/2" [38 mm] height of iron + 1" [25 mm] GROOMING RACK GR12-FN 11-1/4" [286 mm] 17" [432 mm] 5-1/2" [140 mm] TOILET PAPER OLER TP /16" [189 mm] 16-1/2" [419 mm] 5-3/4" [146 mm] Example of Face Frame Cabinet and oor Application Face Frame for oor Applications Top View for Cabinet Applications for oor Applications Front View rawer for Cabinet Applications Example of Frameless / Euro-Style Cabinet and oor Application Top View for Cabinet Applications for oor Applications Front View rawer Face Frame Cabinet Frame imensions shown are recommended minimum cabinet and door dimensions. Customer Service:

73 Closet Accessories eavy-uty Round Tubing...74 Oval Tubing...76 Flanges & End Caps...77 Closet Rods...78 Closet Planning

74

75 Closet Accessories eavy-uty Round Tubing eavy-uty Round Tubing 660 Series Steel core with finished wrap Sleek stainless steel finish Commercial grade 660 Series (Stainless Steel finish) LENGTS AVAILABLE 48" [121.9 cm] 60" [152.4 cm] 72" [182.9 cm] 96" [243.8 cm] 120" [304.8 cm] 144" [365.8 cm] Outside iameter all Thickness Inside iameter See page for recommended Closet Planning Information. 660 SERIES Length Outside iameter Inside iameter all Thickness Finish Units per eight per 660 SS 48 48" [121.9 cm] 1-1/16" [27 mm] 31/32" [24.8 mm] 0.088" [2.2 mm] Stainless Steel 6 22 lbs. [10 kg.] 660 SS 60 60" [152.4 cm] 1-1/16" [27 mm] 31/32" [24.8 mm] 0.088" [2.2 mm] Stainless Steel lbs. [12.5 kg.] 660 SS 72 72" [182.9 cm] 1-1/16" [27 mm] 31/32" [24.8 mm] 0.088" [2.2 mm] Stainless Steel lbs. [15.1 kg.] 660 SS 96 96" [243.8 cm] 1-1/16" [27 mm] 31/32" [24.8 mm] 0.088" [2.2 mm] Stainless Steel 6 44 lbs. [20 kg.] 660 SS " [304.8 cm] 1-1/16" [27 mm] 31/32" [24.8 mm] 0.088" [2.2 mm] Stainless Steel lbs. [24.5 kg.] 660 SS " [365.8 cm] 1-1/16" [27 mm] 31/32" [24.8 mm] 0.088" [2.2 mm] Stainless Steel lbs. [28.8 kg.] 74 ownload at > Resource Library

76 eavy-uty Round Tubing 770 & 750 Series Steel construction ouble plated finish Commercial grade Invisible welded seam eavy-uty Round Tubing Closet Accessories Series Outside iameter all Thickness Inside iameter Series Length Outside iameter Inside iameter all Thickness Finish SERIES Units per eight per " [121.9 cm] 1-1/16" [27 mm] 61/64" [24.2 mm] 0.106" [2.7 mm] Chrome lbs. [12.6 kg.] " [152.4 cm] 1-1/16" [27 mm] 61/64" [24.2 mm] 0.106" [2.7 mm] Chrome 6 35 lbs. [15.9 kg.] " [182.9 cm] 1-1/16" [27 mm] 61/64" [24.2 mm] 0.106" [2.7 mm] Chrome lbs. [18.8 kg.] " [243.8 cm] 1-1/16" [27 mm] 61/64" [24.2 mm] 0.106" [2.7 mm] Chrome lbs. [25 kg.] " [304.8 cm] 1-1/16" [27 mm] 61/64" [24.2 mm] 0.106" [2.7 mm] Chrome lbs. [31.5 kg.] " [365.8 cm] 1-1/16" [27 mm] 61/64" [24.2 mm] 0.106" [2.7 mm] Chrome lbs. [37 kg.] SERIES " [182.9 cm] 1-5/16" [33 mm] 1-13/64" [30.6 mm] 0.106" [2.7 mm] Chrome lbs. [24.4 kg.] " [243.8 cm] 1-5/16" [33 mm] 1-13/64" [30.6 mm] 0.106" [2.7 mm] Chrome lbs. [32.1 kg.] " [304.8 cm] 1-5/16" [33 mm] 1-13/64" [30.6 mm] 0.106" [2.7 mm] Chrome lbs. [39.8 kg.] " [365.8 cm] 1-5/16" [33 mm] 1-13/64" [30.6 mm] 0.106" [2.7 mm] Chrome lbs. [47.6 kg.] SERIES " [182.9 cm] 1-1/16" [27 mm] 63/64" [25.1 mm] 0.075" [1.9 mm] Chrome lbs. [13.9 kg.] " [243.8 cm] 1-1/16" [27 mm] 63/64" [25.1 mm] 0.075" [1.9 mm] Chrome lbs. [18.6 kg.] " [304.8 cm] 1-1/16" [27 mm] 63/64" [25.1 mm] 0.075" [1.9 mm] Chrome lbs. [23 kg.] " [365.8 cm] 1-1/16" [27 mm] 63/64" [25.1 mm] 0.075" [1.9 mm] Chrome lbs. [27.6 kg.] SERIES " [182.9 cm] 1-5/16" [33 mm] 1-15/64" [31.4 mm] 0.075" [1.9 mm] Chrome lbs. [17.3 kg.] " [243.8 cm] 1-5/16" [33 mm] 1-15/64" [31.4 mm] 0.075" [1.9 mm] Chrome lbs. [23.3 kg.] " [304.8 cm] 1-5/16" [33 mm] 1-15/64" [31.4 mm] 0.075" [1.9 mm] Chrome lbs. [28.5 kg.] " [365.8 cm] 1-5/16" [33 mm] 1-15/64" [31.4 mm] 0.075" [1.9 mm] Chrome lbs. [35 kg.] See page for recommended Closet Planning Information. Customer Service:

77 Closet Accessories Oval Tubing Oval Tubing Steel construction Invisible welded seam Chrome plated finish 880 Series (Chrome finish) Inside eight Outside eight 880 Inside idth all Thickness Outside idth See page for recommended Closet Planning Information. EAVY-UTY OVAL TUBING OUTSIE INSIE Length eight idth eight idth all Thickness 880 CR 96 96" [243.8 cm] [30 mm] [15 mm] [28.8 mm] [13.8 mm] [1.2 mm] Chrome CR " [365.8 cm] [30 mm] [15 mm] [28.8 mm] [13.8 mm] [1.2 mm] Chrome 10 Finish Units per eight per 34 lbs. [15.6 kg.] 52.9 lbs. [24 kg.] 76 ownload at > Resource Library

78 Flanges & End Caps Flanges & End Caps Closet Accessories 730, 731, 732 ANO 734 CR 735 CR 881 CR escription oles Finish FLANGES 734 CR Fits 1-1/16" O round tubing (660, & series) 734 BR Fits 1-1/16" O round tubing (660, & series) 735 CR Fits 1-1/16" O round tubing (660, & series) 735 BR Fits 1-1/16" O round tubing (660, & series) 764 CR Fits 1-5/16" O round tubing (750 5 & series) 766 CR Fits 1-5/16" O round tubing (750 5 & series) 881 CR For use with 880 oval tubing 2 screw holes on 2" vertical centers 2 screw holes on 2" vertical centers 2 screw holes on 2" horizontal centers 2 screw holes on 2" horizontal centers 3 holes spaced 1-1/8" from center 3 holes spaced 1-1/8" from center 1 hole for extra mounting strength & 2-5mm pins Units per eight per Chrome 50 (w/screws) 5.1 lbs. [2.3 kg.] Brass 50 (w/screws) 6.1 lbs. [2.8 kg.] Chrome 50 (w/screws) 5.1 lbs. [2.3 kg.] Brass 50 (w/screws) 6.1 lbs. [2.8 kg.] Chrome 12 (w/screws) 2.3 lbs. [1 kg.] Chrome 12 (w/screws) 2.5 lbs. [1.1 kg.] Chrome 50 2 lbs. [0.9 kg.] EN CAPS 730 ANO Fits KV 660 round tubing (1-1/16" O) Anochrome lbs. [0.2 kg.] 731 ANO Fits 1-1/16" O round tubing (660, & series) Anochrome lbs. [0.2 kg.] 732 ANO Fits 1-5/16" O round tubing (750 5 & series) Anochrome lbs. [0.3 kg.] See page for recommended Closet Planning Information. Customer Service:

79 Closet Accessories Closet Rods Closet Rods Steel construction End flanges fixed to rods Two piece construction allows for adjustability to varying closet widths KV2 (Zinc finish) End Flange epth 29/64" [11 mm] Length 2-41/64" [67 mm] 1-3/64" [36 mm] KV2 2-19/32" [66 mm] 1-21/32" [42 mm] 1-3/8" [35 mm] 1-1/2" [38 mm] RP0020 (Chrome finish) Center anger Support for Closet Rods (29201 ANO) Length Finish AJUSTABLE CLOSET ROS Units per eight per KV2BP ZC 18 18" 30" [ cm] Zinc lbs. [6.8 kg.] KV2BP ZC 30 30" 48" [ cm] Zinc lbs. [12.5 kg.] KV2 ZC 18 18" 30" [ cm] Zinc lbs. [3.9 kg.] KV2 ZC 30 30" 48" [ cm] Zinc lbs. [6 kg.] KV2 ZC 48 48" 72" [ cm] Zinc lbs. [9.5 kg.] KV2 ZC 60 60" 96" [ cm] Zinc lbs. [11.2 kg.] KV2 ZC 72 72" 120" [ cm] Zinc lbs. [6.9 kg.] KV2 ZC 96 96" 144" [ cm] Zinc lbs. [9 kg.] KV " 30" [ cm] hite lbs. [4 kg.] KV " 48" [ cm] hite lbs. [6.2 kg.] KV " 72" [ cm] hite lbs. [8.6 kg.] KV " 96" [ cm] hite lbs. [11.5 kg.] KV " 120" [ cm] hite lbs. [6.9 kg.] EAVY-UTY AJUSTABLE CLOSET ROS RP /48BN 30" 48" [ cm] Brushed Nickel lbs. [7.5 kg.] See page for recommended Closet Planning Information. RP /72BN 48" 72" [ cm] Brushed Nickel lbs. [10.6 kg.] RP /120BN 72" 120" [ cm] Brushed Nickel lbs. [17.4 kg.] RP /48BRZ 30" 48" [ cm] Bronze lbs. [7.5 kg.] RP /72BRZ 48" 72" [ cm] Bronze lbs. [10.6 kg.] RP BRZ 72" 120" [ cm] Bronze lbs. [17.4 kg.] RP /48C 30" 48" [ cm] Chrome lbs. [7.5 kg.] RP /72C 48" 72" [ cm] Chrome lbs. [10.6 kg.] RP /120C 72" 120" [ cm] Chrome lbs. [17.4 kg.] RP /48T 30" 48" [ cm] arm hite lbs. [7.5 kg.] RP /72T 48" 72" [ cm] arm hite lbs. [10.6 kg.] RP /120T 72" 120" [ cm] arm hite lbs. [17.4 kg.] CENTER ANGER SUPPORT ANO Center anger Support for fully extended 72" [182.9 cm] and 96" [243.8 cm] rods Anochrome lbs. [0.5 kg.] 78 ownload at > Resource Library

Waste & Recycling. A Solution for Every Kitchen

Waste & Recycling. A Solution for Every Kitchen Waste & Recycling A Solution for Every Kitchen Waste & Recycling A complete offering with a total of seven product series, including four different levels of Soft-Close options. Each product has been designed

More information

Pivot-out waste bin with self-opening and self-closing lid Clamping ring holds bags securely Works with most face frame & frameless cabinets

Pivot-out waste bin with self-opening and self-closing lid Clamping ring holds bags securely Works with most face frame & frameless cabinets Corner Recycling Centers Three removable white polymer 32 qt. bins rotate on 1" diameter post esigned to fit in 36" base corner cabinet Specialty Series aste & Recycling Post eight Range RRC28K-: 28-1/2"

More information

Wide Width. ECW9-1-20WH 7-5/16" [185 mm] 14-3/8" [365 mm] 7-13/16" [198 mm] 14-5/16" [363 mm] 17-7/16" [441 mm] 16" [406 mm] White 20 qt lbs.

Wide Width. ECW9-1-20WH 7-5/16 [185 mm] 14-3/8 [365 mm] 7-13/16 [198 mm] 14-5/16 [363 mm] 17-7/16 [441 mm] 16 [406 mm] White 20 qt lbs. aste & Recycling Roll-ut and oor-mount racket Kits C9-1-20 Roll-ut aste & Recycling Non-Lidded ual orientation allows for installation in both narrow and wide applications Mounted on roller slides for

More information

Pull-Out Systems. Wood & Wire...50 Wire...54 Specialty...59 Cabinet Dimensions Download at > Resource Library

Pull-Out Systems. Wood & Wire...50 Wire...54 Specialty...59 Cabinet Dimensions Download at  > Resource Library Pull-Out ystems ood & ire...50 ire...54 pecialty...59 Cabinet imensions...62 48 ownload at www.kv.com > Resource Library Pull-Out ystems Customer ervice: 1.800.253.1561 49 Pull-Out ystems ood & ire Pot

More information

Polymer Full-Round Lazy Susans

Polymer Full-Round Lazy Susans Polymer Full-Round Lazy Susans Wood Lazy Susans Lazy Susans Polymer construction with double wall rim and strengthening ribs Rim height is Standard pack includes shelves, one post, installation template

More information

Specialty Storage. Wine Accessories...66 Spice Racks...67 Wire Accessories...68 Cabinet Dimensions Download at > Resource Library

Specialty Storage. Wine Accessories...66 Spice Racks...67 Wire Accessories...68 Cabinet Dimensions Download at  > Resource Library Specialty Storage ine Accessories...66 Spice Racks...67 ire Accessories...68 Cabinet imensions...71 64 ownload at www.kv.com > Resource Library Specialty Storage Customer Service: 1.800.253.1561 65 Specialty

More information

Specialty Storage. Knape and Vogt s specialty storage line offers space saving solutions for every room, cabinet, and drawer in a home.

Specialty Storage. Knape and Vogt s specialty storage line offers space saving solutions for every room, cabinet, and drawer in a home. Specialty Storage Knape and Vogt s specialty storage line offers space saving solutions for every room, cabinet, and drawer in a home. 65 66 ine Accessories 67 Spice Racks 68 ire Accessories 71 Cabinet

More information

Tall & Pantry Accessories

Tall & Pantry Accessories Tall & Pantry Accessories Organizing your pantry is easier than ever with Rev-A-Shelf s innovative line of accessories. Whether you prefer the beautiful look of wood, the luxurious style of chrome, or

More information

Kitchen and Bath Organization

Kitchen and Bath Organization Ironing Boards...873 874 Pull-Out Table Systems...875 876 Foldaway Systems...877 878 Corner Systems...879 896 Base Cabinet Pull-Out Systems...897 905 Basket Storage Systems...906 910 Pantry Pull-Out Systems...911

More information

INNOVATIONS IN KITCHEN CABINET STORAGE

INNOVATIONS IN KITCHEN CABINET STORAGE INNOVATIONS IN KITCHEN CABINET STORAGE Striving for perfection and harmony Perfection, as we understand it, does not serve only to demonstrate our technical abilities. We believe we have approached perfection

More information

INNOVATIONS IN KITCHEN CABINET STORAGE

INNOVATIONS IN KITCHEN CABINET STORAGE INNOVATIONS IN KITCHEN CABINET STORAGE 1 Striving for perfection and harmony Perfection, as we understand it, does not serve only to demonstrate our technical abilities. We believe we have approached perfection

More information

LAZY SUSANS. KITCHEN Kitchens ACCESSORIES. Kitchens. Wood Kidney Shaped 2 Tray Set With Hardware. Wood Full Circle 2 Tray Set With Hardware

LAZY SUSANS. KITCHEN Kitchens ACCESSORIES. Kitchens. Wood Kidney Shaped 2 Tray Set With Hardware. Wood Full Circle 2 Tray Set With Hardware KITCHEN s ACCESSORIES s LAZY SUSANS Wood Kidney Shaped 2 Tray Set With ORDER NUMBER TRAY MATERIAL 45-810 24 KIDNEY WOOD 45-812 28 KIDNEY WOOD 45-814 32 KIDNEY WOOD Post Adjustable from 26 to 32 Wood Full

More information

SERIES Door Mount Spice Rack Accessories. Accessories WALL WALL

SERIES Door Mount Spice Rack Accessories. Accessories WALL WALL How do you make more room in a confined space like a wall cabinet? Or how do you use all the space in your cabinet when you can t reach the shelves? Answer - Add Rev-A-Shelf Wall. Our classic door mount

More information

ACCESSORIES, MODIFICATIONS & UPGRADES

ACCESSORIES, MODIFICATIONS & UPGRADES ACCESSORIES, MODIFICATIONS & UPGRADES CABINET NO DOOR(S) Cabinet includes shelves, drawer boxes, accessories and glides where applicable. No doors or drawer fronts will be included. Cabinet will have white

More information

PRODUCT # DESCRIPTION DIMENSIONS FINISH SET PER CTN WHT PER CARTON

PRODUCT # DESCRIPTION DIMENSIONS FINISH SET PER CTN WHT PER CARTON Let s face it the bathroom is usually one of the hardest areas to keep tidy with all those odds and ends at least, it used to be. Now organizing your bathroom is easy with all the storage solutions in

More information

Multidecor S. de R.L. de C.V

Multidecor S. de R.L. de C.V Multidecor S. de R.L. de C.V. Cuadrante de San Francisco Núm. 14-1 Col. Cuadrante de San Francisco. C.P. 04320, México D.F. info@multidecor.com.mx (55) 5554 5858 / (55) 5544 3737 www.multidecor.com.mx

More information

30" High Single Door - Wall Cabinets Manor White. 30" High Double Door - Wall Cabinets Manor White. 36 High Single Door - Wall Cabinets Manor White

30 High Single Door - Wall Cabinets Manor White. 30 High Double Door - Wall Cabinets Manor White. 36 High Single Door - Wall Cabinets Manor White Cabinets Generated 06/07/2018 prices valid for 7 days * Painted White Doors * 5 Piece MDF Recessed Panel with 1/2" Reveal Doors and Slab Drawer Fronts * 5 Piece MDF with Flat Center Panel * MDF Doors and

More information

30" High Single Door - Wall Cabinets Concord Shaker. 30" High Double Door - Wall Cabinets Concord Shaker

30 High Single Door - Wall Cabinets Concord Shaker. 30 High Double Door - Wall Cabinets Concord Shaker Cabinets Generated 09/29/2018 prices valid for 7 days * Dark Mocha Cherry Stain with a Furniture Quality Satin Finish * Square Recessed Panel Full Overlay Doors and Matching Drawers * Solid Birch Doors

More information

2017 Product Specification Book. (Updated May 16th, 2017)

2017 Product Specification Book. (Updated May 16th, 2017) 2017 Product Specification Book (Updated May 16th, 2017) 1 CFA Tips * ALL carcasses are plywood construction ~ STANAR! * ALL drawer boxes are ovetailed hard wood boxes (3/4" or 1/2") ~ STANAR! * ALL drawer

More information

BLIND CORNER. 53PSP3-18SC-MP/pg. 81

BLIND CORNER. 53PSP3-18SC-MP/pg. 81 Let Rev-A-Shelf end your blind corner dilemma with our line of innovative organizational accessories. Specially designed to maximize the storage capacity of your cabinets, each product incorporates revolutionary

More information

ASIA Cabinetry EUROPEAN FRAMELESS COLLECTION

ASIA Cabinetry EUROPEAN FRAMELESS COLLECTION ASIA Cabinetry EUROPEAN FRAMELESS COLLECTION Negro SM ASIA Cabinetry Euro Collection v040118. ASIA Cabinetry retains the right to add or remove item without notice. 1 of 12 BASE CABINETS 1 Full Height

More information

2013 Brochure.

2013 Brochure. 2013 Brochure Since 2003, South-West Hardware, an importer and distributor of furniture hardware components and accessories, has from its humble beginnings as a regional Kitchener-Waterloo Supplier, become

More information

Kitchen Essentials. The must-have components for every kitchen

Kitchen Essentials. The must-have components for every kitchen Kitchen Essentials The must-have components for every kitchen DECORATIVE HARDWARE EXCLUSIVE COLLECTION Richelieu is a distributor and manufacturer of specialty hardware. Our mission is to offer our customers

More information

WALL. 5PD-24CRN/ pg. 238

WALL. 5PD-24CRN/ pg. 238 224 5PD-24CRN/ pg. 238 How do you make more room in a confined space like a wall cabinet? How do you use all the space in your cabinet when you can t reach the shelves? Add Rev-A-Shelf wall accessories.

More information

Empire Industries. Item Price List. Effective February st addendum to May 2011 Price Book. Open Empress.

Empire Industries. Item Price List. Effective February st addendum to May 2011 Price Book. Open Empress. Empire Industries Item Price List Effective February 2012 1st addendum to May 2011 Price Book Doll House Open Empress Bella www.empire-industries.com New Collections We are pleased to start 2012 with 3

More information

Exam Room Group (shown) 8010 (reversed) W: 43", 46", 49" H : Wall: 30", Desk: 30" D : Wall: 14.25", Desk: 24.25" Cabinet group consists of:

Exam Room Group (shown) 8010 (reversed) W: 43, 46, 49 H : Wall: 30, Desk: 30 D : Wall: 14.25, Desk: 24.25 Cabinet group consists of: Exam Room Group Exam Room Group 8008 W: 29" - 50" (3" increments) H : Wall: 8", Desk: 30" D : Wall: 13.25", Desk: 24.25" #3020 wall mounted book shelf (27" - 48" W) #1500-4.5" knee space drawer (27" -

More information

30" High Single Door - Wall Cabinets Bayshore Brown. 30" High Double Door - Wall Cabinets Bayshore Brown

30 High Single Door - Wall Cabinets Bayshore Brown. 30 High Double Door - Wall Cabinets Bayshore Brown Cabinets Generated 02/26/2019 prices valid for 7 days * Medium Coffee Stain with Dark Glaze Catalyzed Matte Finish (clear coat) * Square Raised Panel Full Overlay Doors and Matching Drawers * Solid Birch

More information

Steel Casework Construction Details

Steel Casework Construction Details CASEWORK CONSTRUCTION DETAILS Overview Cabinets Each cabinet is fabricated from prime quality furniture grade cold rolled or type 304-4 or 316-4 stainless steel. All components are die formed, notched,

More information

Storage Fittings 1 º q µ ³ ³ Â É 1.1

Storage Fittings 1 º q µ ³ ³ Â É 1.1 1.0 Storage Fittings 1 1.1 1 ARENA Plus anti-slip finish welcome to the quiet kitchen Kesseböhmer developed the special ARENA Plus coating which prevents pots and pans, crockery and groceries slipping

More information

30" High Single Door - Wall Cabinets Weathered Gray. 30" High Double Door - Wall Cabinets Weathered Gray

30 High Single Door - Wall Cabinets Weathered Gray. 30 High Double Door - Wall Cabinets Weathered Gray Cabinets Generated 09/30/2018 prices valid for 7 days * Rustic Gray Stain * Square Recessed Panel Full Overlay Doors and Matching Drawers * Solid Maple Doors and Drawer Fronts with MDF Center Panel with

More information

Just six inches bigger than the Model 661, the Model

Just six inches bigger than the Model 661, the Model Side-by-Side Refrigerator / Freezer Front venting allows unit to be completely built in Hermetically sealed refrigeration units Serial and model number plate Lighted electronic control panel Adjustable

More information

ASIA CABINETRY EUROPEAN STYLES SPECIFICATION LIST KITCHEN CABINETS BASE

ASIA CABINETRY EUROPEAN STYLES SPECIFICATION LIST KITCHEN CABINETS BASE ASIA CABINETRY EUROPEAN STYLES SPECIFICATION LIST KITCHEN CABINETS BASE All base standard frameless cabinet boxes are 24" deep with a total height of 34.5" BSR06 1 door, 2-layer metal rack BSR09 1 door,

More information

Cabinet interiors Summary of ranges

Cabinet interiors Summary of ranges Cabinet interiors Summary of ranges Fitting systems for kitchens Summary 888-889 Fitting systems for bathrooms Summary 1052-1053 Fitting systems for wardrobe interiors Range summary 1068-1069 Fitting systems

More information

Curving (S) (L) CHORD (C) (IR) (IR) Example

Curving (S) (L) CHORD (C) (IR) (IR) Example Showcases Showcase systems offer a wide selection of framing, lighting and door options that allow you to integrate the components of your choice into a custom showcase that meets your exact specifications.

More information

Concealed hinges. Premium hinge systems for cabinet doors. blum.com

Concealed hinges. Premium hinge systems for cabinet doors. blum.com Concealed hinges Premium hinge systems for cabinet doors blum.com Quick reference Simple planning and ordering lum offers many on-line tools to help you with your kitchen planning and ordering. Planning

More information

All the Right Spaces Construction Specifications

All the Right Spaces Construction Specifications ll the Right Spaces Construction Specifications ll units are crafted out of ¾ plywood sides, top and bottom ¾ X 1 ¾ solid wood side face frames and ¾ X 3 ¼ solid wood face frames top and bottom and ¼ plywood

More information

Overhead Door and Desk Slides. Overhead Door and Desk Slides lbs.

Overhead Door and Desk Slides. Overhead Door and Desk Slides lbs. Overhead Door and Desk Slides 20 75 lbs. Overhead Door and Desk Slides 4461D 5/8 Extension Variable Height Keyboard Slide... 55 8100 3/4 Extension Keyboard Slide... 56 8150, 8157 3/4 Extension Variable

More information

RAM COMMERCIAL VAN SOLUTIONS

RAM COMMERCIAL VAN SOLUTIONS VAN STORAGE EQUIPMENT RAM COMMERCIAL VAN SOLUTIONS FOR PROMASTER & C/V TRADESMAN VANS WWW.WEATHERGUARD.COM DESIGNED WITH THE PROFESSIONAL IN MIND WEATHER GUARD Van Solutions are the trade professional

More information

European Inspiration. v Plywood CONSTRUCTION

European Inspiration. v Plywood CONSTRUCTION European Inspiration v Plywood CONSTRUCTION PRICING & SPECIFICATIONS 04 3 Designer Finishes YOUR CHOICE Ash Ivory Walnut European Inspiration v Plywood CONSTRUCTION D O O R S T Y L E S Geneva MAPLE Palermo

More information

This is the smallest combination refrigerator / freezer

This is the smallest combination refrigerator / freezer Over-and-Under Refrigerator / Freezer Front venting allows unit to be completely built in Hermetically sealed refrigeration units Lighted electronic control panel Serial and model number plate Adjustable

More information

AkroBins. Storage Bins

AkroBins. Storage Bins X Storage ins kroins Control inventories, shorten assembly times, and minimize parts handling. eavy-duty bins securely stack atop each other, sit on shelving, and hang from kro-mils racks, panels, rails,

More information

STANDARD CABINET ASSEMBLY

STANDARD CABINET ASSEMBLY STANDARD CABINET ASSEMBLY TECHNICAL DETAILS Your work. Your space. Your way. Our design your work approach is our commitment to ensuring that we develop casework solutions to meet your unique needs. The

More information

toll free display cases, showcases & merchandisers acrylic countertop display cases wall unit displays

toll free display cases, showcases & merchandisers acrylic countertop display cases wall unit displays 5 acrylic countertop display cases toll free - 877-4- 47 www.eddies.com 5052 505 8¼ h x ½ w 4 h x 8 w x 8 d 505 5058 8¾ h x 8¼ w 7¾ h x w x 7½ d 505 locking hexagonal showcase clear 8.5 2.45 0.50 w/ rotatable

More information

If you like the strong vertical lines of side-by-side

If you like the strong vertical lines of side-by-side Side-by-Side Refrigerator Freezer Front venting allows unit to be completely built in Hermetically sealed refrigeration units Serial and model number plate Lighted electronic control panel Adjustable wire

More information

IMPACT CABINET & DOOR SYSTEM

IMPACT CABINET & DOOR SYSTEM IMPACT CABINET & DOOR SYSTEM 2018 www.hafele.com.au 1 IMPACT DOOR CARCASE SYSTEM / 07.17 OVERVIEW FLEXIBILITY, DOORS + PANELS IMPACT carcases can be used in more than one design, allowing for greater design

More information

bathroom kitchen laundry Head office PO Box 198 Torrensville SA 5031 t f e

bathroom kitchen laundry Head office PO Box 198 Torrensville SA 5031 t f e bathroom kitchen laundry 100% australian owned www. Head office PO Box 198 Torrensville SA 5031 t 08 8349 6433 f 08 8349 6466 e info@ 2011 1010 Bring a sleek new aesthetic to your laundry with seima s

More information

Lifting Cabinet Doors Up and Out of the Way

Lifting Cabinet Doors Up and Out of the Way Lifting Cabinet Doors Up and Out of the Way AVENTOS lift systems are the premium functional hardware for upper cabinets. Doors easily lift up and out of the way, allowing complete access while not interfering

More information

Utility Carts With Rails MRI Room Accessories

Utility Carts With Rails MRI Room Accessories Utility Carts With Rails MRI Room Accessories Tables/Carts with Top Shelf and Rails Specifications: Constructed of stainless steel 2 Dual Wheel Casters With Rails 36 3/4 High Assembly Required Can be assembled

More information

Hardware Catalog Drawer Slides Shelving Closet Fixtures TV Accessories

Hardware Catalog Drawer Slides Shelving Closet Fixtures TV Accessories Hardware Catalog Drawer Slides Shelving Closet Fixtures TV Accessories Table of Contents Drawer Slides... 4 For more than a century, we ve studied and mastered the mechanics of motion hardware and drawer

More information

PHLEBOTOMY EQUIPMENT

PHLEBOTOMY EQUIPMENT PHLEBOTOMY EQUIPMENT NUMERICAL INDEX 10-D... 31 10-K... 30 6006-U... 7 6040-P... 9 6049-P... 9 6050-U... 6 6059-U... 7 6069-U... 7 6077... 32 6088... 42 6310... 18 6320... 19 6330-P... 19 6340-P... 19

More information

Room Service Tables, Carts & Equipment ROOM SERVICE TABLES HOT BOXES, COOL BOXES & STORAGE RACKS ROOM SERVICE CARTS

Room Service Tables, Carts & Equipment ROOM SERVICE TABLES HOT BOXES, COOL BOXES & STORAGE RACKS ROOM SERVICE CARTS Room Service Tables, Carts & Equipment ROOM SERVICE TABLES HOT BOXES, COOL BOXES & STORAGE RACKS ROOM SERVICE CARTS FORBES EXPRESS MODELS Usually ships within one week ROOM SERVICE TABLES Forbes offers

More information

Please review the following for Hutch cabinet information. Contact your Case Systems, Inc. dealer for clarifications.

Please review the following for Hutch cabinet information. Contact your Case Systems, Inc. dealer for clarifications. Contents General Information 74 Hutch Cabinet Dimensions 75 Common Sizes 76 General Storage Hutch Cabinets Corner Hutch Cabinets 78 Cubicle Storage Hutch Cabinets Folio Storage Hutch Cabinets 82 Double-Sided

More information

PICKUP & SERVICE BODY DRAWERS MODULAR WORK TRUCK INTERIORS MAXIMUM EFFICIENCY ENHANCED ORGANIZATION INCREASED SAFETY

PICKUP & SERVICE BODY DRAWERS MODULAR WORK TRUCK INTERIORS MAXIMUM EFFICIENCY ENHANCED ORGANIZATION INCREASED SAFETY PICKUP & SERVICE BODY DRAWERS MODULAR WORK TRUCK INTERIORS MAXIMUM EFFICIENCY ENHANCED ORGANIZATION INCREASED SAFETY PROUDLY MANUFACTURED IN THE USA 550 Albion Avenue Schaumburg, IL 60193 PRODUCT INDEX

More information

training tables DAYS Product Type: Training Table, Top Series Name: Maverick with radius corners is MM, Arroyo with square corners is AR

training tables DAYS Product Type: Training Table, Top Series Name: Maverick with radius corners is MM, Arroyo with square corners is AR Product Specifications How to Order ORKSURFACE UNITS 1. Product number: MM TR 24 60 3 ays and Lead Time 1 thick tops only, 2mm PVC edge-banding, pilot holes for post leg brackets only and metal inserts

More information

Alternative Design Report Work Station and Pool Lift

Alternative Design Report Work Station and Pool Lift Alternative Design Report Work Station and Pool Lift TEAM #1 Ana Groff Brandon Calavan Dylan Rinker Sebastian Pineo Steven Ben Faculty Advisor: John Enderle Teaching Assistant: Sarah Brittain Project 2

More information

V I S I O N CASEGOODS COLLECTION

V I S I O N CASEGOODS COLLECTION BREAKFRONT DESKS DESKS FEATURE BREAKFRONT MODESTY DESIGN AND ALLOW FOR A CONSISTENT VERTICAL GRAIN PATTERN ON APPROACH CHASSIS SURFACES. OPTIONAL ACRYLIC PANEL INSERT CREATES ADDITIONAL VISUAL INTEREST.

More information

Product catalog. North America 2 nd edition

Product catalog. North America 2 nd edition Product catalog North America 2 nd edition Welcome to the world of Kesseböhmer! discover the PossibIlities We invite you to see kitchens in a whole new way. Kesseböhmer provides function that delights,

More information

DODGE RAM PROMASTER AND PROMASTER CITY PRODUCT GUIDE

DODGE RAM PROMASTER AND PROMASTER CITY PRODUCT GUIDE RM PROMSTR PROUT UI ontractor s hoice or Mobile Storage Solutions O RM PROMSTR N PROMSTR ITY PROUT UI -877-795-7733 Standard Shelving Kits odge Ram Promaster nd Promaster ity Kits W Shelves Included Included

More information

HI-Mobile FEATURES & SPECIFICATIONS

HI-Mobile FEATURES & SPECIFICATIONS HI-Mobile FEATURES & SPECIFICATIONS www.howard-medical.com 877.856.6441 We ve put the pieces together superior technology integrated with the elements of skilled healthcare standard carts CONFIGURABLE

More information

Kitchen Fittings and Accessories

Kitchen Fittings and Accessories Kitchen Fittings and Accessories CONVOY LAVIDO Minimum depth: 500mm System weight: 130kg The weight and load specifications are given as appropriate values and depend on the selected cupboard materials

More information

Furnital srl via Manzoni Montano Lucino (Co) - Italy Tel Fax

Furnital srl via Manzoni Montano Lucino (Co) - Italy Tel Fax Furnital srl via Manzoni 11 22070 Montano Lucino (Co) - Italy Tel. +39 031 605386 Fax. +39 031 4721516 info@furnital.it www.furnital.it THE COMPANY profile Furnital would like to be considered as a valuable

More information

wardrobe cargo baskets WIRE PRODUCTS

wardrobe cargo baskets WIRE PRODUCTS wardrobe cargo baskets WIRE PROUCTS 201 PRESTIGE SUPREME INE magic comfort with solid bottom anti- slip coating prestige supreme line - solid bottom shelves with anti- slip coating - optional shelf dividers

More information

Hinges Drawer Slides Drawer Systems Accessories

Hinges Drawer Slides Drawer Systems Accessories NÜVO Conceived and designed in Europe Hinges Drawer Slides Drawer Systems Accessories NÜVO A u g u s t 2 0 1 3 e d i t i o n LIFETIME WARRANTY HINGES NÜVO 8mm Dowels Screw-in S Self-Close 11 mm Ø 8 mm

More information

AKRO TOTES AND CONTAINERS

AKRO TOTES AND CONTAINERS PRODUCT INFORMATION AKRO TOTES AND CONTAINERS 2946 Larimer St. Denver, CO 80205 303-295-1100 / 800-373-7693 FAX 303-295-2464 Email info@snyderequipment.com www.snyderequipment.com VantageBin storage bins,

More information

TIOMOS HINGES TIOMOS HINGE SYSTEM. The hinge system for the door to the future.

TIOMOS HINGES TIOMOS HINGE SYSTEM.   The hinge system for the door to the future. TIOMOS HINGES TIOMOS HINGE SYSTEM The hinge system for the door to the future. www.grassusa.com The hinge system for the door to the future: Maximum Stability. Integrated Soft-close. Total Design. Our

More information

THE IDEAL SOLUTION TROLLEYS. Sales Telephone: Sales Fax:

THE IDEAL SOLUTION TROLLEYS. Sales Telephone: Sales Fax: THE IDEAL SOLUTION TROLLEYS Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk s PREMIER GASTRO RACKING TROLLEYS Gastro 1/1 Profile 325mm Gastro 2/1 Profile 530mm

More information

Quality. for All. of Automotive

Quality. for All. of Automotive Quality for All of Automotive Service Department Body Shop Car Wash/Detail Luxor carts for your Service Department Save time by keeping tools organized and accessible. The high density polyethylene material

More information

REACH-INS 4 REACH-IN 4 REACH-IN 4 REACH-IN

REACH-INS 4 REACH-IN 4 REACH-IN 4 REACH-IN LOOKBOOK REACH-INS Make the most of a smaller closet space with Storables reach-in closet layouts. Our wood and wire shelving can be mounted at practically any height or width, and is available in low-profile

More information

DIY Cabinet Warehouse In-Stock Price List 2015

DIY Cabinet Warehouse In-Stock Price List 2015 DIY Cabinet Warehouse In-Stock Price List 2015 Base with Full Height Door Base cabinets with 4 drawers 1 door 1 adjustable shelf 4 Vertical Drawers Size Code Contempra Coventry Salem 12" BD124V 289 370

More information

Hi-Tech specially designed components allow for fast and easy assembly.

Hi-Tech specially designed components allow for fast and easy assembly. OPEN SHELVING MEDIUM, HEAVY AND EXTRA HEAVY-DUTY HI-TECH STEEL SHELVING Open Starter Units Include: Two beaded front posts, two angle back posts, one pair of back sway braces, two pair of side sway braces

More information

Micro Suede Two Tier Jewelry Trays.

Micro Suede Two Tier Jewelry Trays. Micro Suede Two Tier Jewelry Trays. Quality Micro Suede now available with our many tray options. We ve combined popular Micro Suede with our various storage tray options to give you, and your customers,

More information

PRODUCT CATALOG NORTH AMERICA 2 ND EDITION

PRODUCT CATALOG NORTH AMERICA 2 ND EDITION PRODUCT CATALOG NORTH AMERICA 2 ND EDITION WELCOME TO THE WORLD OF KESSEBÖHMER! DISCOVER THE POSSIBILITIES WE INVITE YOU TO SEE KITCHENS IN A WHOLE NEW WAY. KESSEBÖHMER PROVIDES FUNCTION THAT DE- LIGHTS,

More information

Medicine Cabinets. Modern Reflections

Medicine Cabinets. Modern Reflections Medicine Cabinets Modern Reflections Snap On Blum Hinges Mitered Frame Silent Close Snap Fit 5/16" Adjustable Shelf FEATURES & BENEFITS Immediate Delivery Lifetime Warranty On Mechanical Parts Rust Proof

More information

sidewise price guide

sidewise price guide L O U N G E R E C L I N E R B A S I C S...........................2 5 P L A N N I N G W I T H L O U N G E R E C L I N E R...................2 6 2 S O L O D E S K B A S I C S.................................2

More information

Frontal Covers 9 º qâ Ê ³ n 9.1

Frontal Covers 9 º qâ Ê ³ n 9.1 .0 Frontal Covers.1 Furniture handles and knobs Furniture handles combine functionality and design and give a individual and personal touch to each piece of furniture. Häfele provides a huge range of furniture

More information

PLUS. 5 x 9. Magnetic Tray SKU x 11. Magnetic Tray SKU Four Powerful Magnets with Protective Rubber

PLUS. 5 x 9. Magnetic Tray SKU x 11. Magnetic Tray SKU Four Powerful Magnets with Protective Rubber STORAGE Workbench Professional Workbench SKU 400312 49 21006 Weight Capacity: 1,200 lbs Overall Dimensions: 60 W x 31 D x34 H 13 Gauge Steel Construction Full Bottom Shelf Durable Powder Coated Finish

More information

CATALOGUE. SinKS, FAUCETS & ACCESSORiES

CATALOGUE. SinKS, FAUCETS & ACCESSORiES KiTChEn & BATh CATALOGUE SinKS, FAUCETS & ACCESSORiES Artisan Mini Catalogue 06-2014:Artisan 2014-05-27 10:13 AM Page 4 on. Welcome to our world! Artisan covers a wide range of your architectural needs:

More information

AVENTOS HK-XS AVENTOS HK-XS

AVENTOS HK-XS AVENTOS HK-XS AVENTOS HK-XS AVENTOS HK-XS High quality in a slim design High quality in a slim design blum.com blum.com High quality in a convenient package AVENTOS HK-XS is is a smaller, cost-effective lift lift system

More information

FORD TRANSIT VAN SOLUTIONS

FORD TRANSIT VAN SOLUTIONS VAN STORAGE EQUIPMENT FORD TRANSIT VAN SOLUTIONS WWW.WEATHERGUARD.COM BULKHEADS Our Low-, Mid-, and High-Roof van bulkheads allow you to separate the driver compartment from the cargo area for maximum

More information

ModuFlex TM Circulation Desks

ModuFlex TM Circulation Desks Helping You Turn Information Into Education. TM GENERAL SPECIFICATIONS The ModuFlex Series circulation desk is designed to provide the maximum degree of flexibility of modern cabinetry. Each service unit

More information

AV BASICS BY SALAMANDER DESIGNS

AV BASICS BY SALAMANDER DESIGNS AV BASICS BY SALAMANDER DESIGNS 2 SALAMANDER DESIGNS, the leader in premium quality home entertainment furniture, is renowned for highly flexible, customizable product lines that are available in numerous

More information

SHELVING PRODUCTS. Maximize Your Storage Space

SHELVING PRODUCTS. Maximize Your Storage Space SHELVING PRODUCTS Maximize Your Storage Space SHELVING UNITS Pre-engineered sections are 36, 42, and 48 wide and 84, 96 and 120 high, with shelves adjustable on 1-1/2 centers. For double row, back-to-back

More information

8091, X4 Pocket Door Slide

8091, X4 Pocket Door Slide 8091, 8092 4X4 Pocket Door Slide Number Mounting Action Load Rating Maximum Dimensions Clearance Finish Key Features 8091 Packaged Without Hinge or Hinge Base 8092 Packaged With Attached Hinge Base Side

More information

Garage Organization FAST-MOUNT. Product Lines. Designed Smart. Built Strong. Safe and Secure. Built to withstand high use working environments.

Garage Organization FAST-MOUNT. Product Lines. Designed Smart. Built Strong. Safe and Secure. Built to withstand high use working environments. Garage Organization Garage Organization Product Lines Built to withstand high use working environments. Designed Smart. Built Strong. Safe and Secure. FAST-MOUNT A fast and economical way to organize.

More information

STOCK ORDER FORM - Hampton

STOCK ORDER FORM - Hampton FAX YOUR ORDER TO: E-MAIL YOUR ORDER TO: 616.456.8091 williamsorders@wmsdist.com Date Account Name STOCK ORDER FORM - Hampton PG 1 NET PRICED ITEMS QTY Price Total PO# Contact Name Touch Up Kit 15 0 Sample

More information

Clipper Defined. Shelving. Clipper Hi-Performance Shelving Systems. Growth with. Penco Hi-Performance Shelves. Growth with

Clipper Defined. Shelving. Clipper Hi-Performance Shelving Systems. Growth with. Penco Hi-Performance Shelves. Growth with Defined Clipper Hi-Performance Systems At the heart of the Clipper System is the ingenious Penco Clipper Clip. It is easily installed, holds the shelf firmly in place, can be repositioned at any time,

More information

MATERIAL HANDLING SOUTHWIRETOOLS.COM

MATERIAL HANDLING SOUTHWIRETOOLS.COM MATERIAL HANDLING 1-855-798-6657 SOUTHWIRETOOLS.COM 2017 Southwire Company, LLC. All rights reserved. Registered Trademark and Trademark of Southwire Company, LLC. PIANO BOXES The Piano Boxes feature shelves,

More information

Sliding Door Fittings, Roller Shutters Pivot Sliding Door Fittings

Sliding Door Fittings, Roller Shutters Pivot Sliding Door Fittings Ultra 20 Swing Door fitting, door weight up to 20 kg Area of application: Door swings out to the front and to the side when being opened, allowing unlimited access to the cabinet interior, can be used

More information

High quality hinge with integrated dampening. sensys.

High quality hinge with integrated dampening. sensys. High quality hinge with integrated dampening. sensys. Technik für Möbel 2 sensys. Perfect design, perfect action Hettich s first hinge with integrated dampening sensys marks the latest generation in hinge

More information

For maximum requirements: S 7000

For maximum requirements: S 7000 For maximum requirements: S 7000 There are tasks that only specialists can handle. Furnishing changing rooms, for example. Where the crucial bit of extra space, functionality, and design is needed - that

More information

CIRCULATION DESKS Series Shown with Optional Decorative Fronts & Optional Radius Configuration

CIRCULATION DESKS Series Shown with Optional Decorative Fronts & Optional Radius Configuration CIRCULATION DESKS 4400 Series Shown with Optional Decorative Fronts & Optional Radius Configuration CIRCULATION DESKS 4400 Series Shown with Optional Liberty Millwork Trim 4400 Series Shown with Optional

More information

Utility Carts. Tables/Carts. 18 x x x x x x 72 Must Ship via Truck

Utility Carts. Tables/Carts. 18 x x x x x x 72 Must Ship via Truck Tables/Carts Constructed of Stainless Steel 2 Dual Wheel Casters Without rails 34 high, With rails 36¾ high Assembly Required, Can be assembled for additional $50.00 18 x 24 TA-5001 With top shelf and

More information

Kargo Master Sheet Metal Partitions Features and Benefits

Kargo Master Sheet Metal Partitions Features and Benefits PARTITIONS SHEET METAL PARTITIONS Kargo Master Sheet Metal Partitions Features and Benefits 18 gauge steel, hemmed and embossed to provide extra strength, security and reduce noise. EXTRA SECURITY. Corner

More information

Wire Baskets. Blind Corner Solutions Each Tray Installed Independently 2-1. With Revolving Trays. Smooth Swing. Soft Closing Optional WMC-001L

Wire Baskets. Blind Corner Solutions Each Tray Installed Independently 2-1. With Revolving Trays. Smooth Swing. Soft Closing Optional WMC-001L Blind Corner Solutions Each Tray Installed Independently Smooth Swing LeftHand Opening RightHand Opening With Revolving Trays Min. Door Width WMC001L LeftOpen W800 x D450 x H95 450 900 WMC002R RightOpen

More information

Classic Mahogany (7225) Cherry (7210) Finishes

Classic Mahogany (7225) Cherry (7210) Finishes L A M I N A T E C O L L E C T I O N Classic Mahogany (7225) Cherry (7210) Finishes 7225/7210 2 Style - Sleek, sophisticated lines are achieved through stylish, radius shaped tops featured on all desks.

More information

FORD PRODUCTS 2018 CATALOG V7.2 VAN INTERIORS TRUCK RACKS VAN RACKS AND MORE

FORD PRODUCTS 2018 CATALOG V7.2 VAN INTERIORS TRUCK RACKS VAN RACKS AND MORE FORD PRODUCTS 2018 CATALOG V7.2 VAN INTERIORS TRUCK RACKS VAN RACKS AND MORE KARGOMASTER.COM 800-343-7486 TABLE OF CONTENTS Cargo Van Interior Package & Products TRANSIT, MID/HIGH ROOF PACKAGES Base, 40TRM

More information

Colour: Black. ML x 50 1/8 x 12 1/2 8" Rubber ML x 62 1/8 x 12 1/2 8" Rubber ML599 Jack Handle 8" Rubber

Colour: Black. ML x 50 1/8 x 12 1/2 8 Rubber ML x 62 1/8 x 12 1/2 8 Rubber ML599 Jack Handle 8 Rubber Utility Carts Side Panel Platform Trucks Ideal for transporting and retaining small packages and materials Ergonomic handle design improves control and worker safety Side panels easily remove to accommodate

More information

20 DRAWER 23 DRAWER. 5, MTZBK7217MZ + MTZBK7200H + MTZBK7203SL Overall Dimensions: 91 W x 30 D x 75-1/2 H. Hutch MTZBK7200H.

20 DRAWER 23 DRAWER. 5, MTZBK7217MZ + MTZBK7200H + MTZBK7203SL Overall Dimensions: 91 W x 30 D x 75-1/2 H. Hutch MTZBK7200H. ALL MONTEZUMA TOOL BOXES REQUIRE LIFT GATE SERVICE SKU 301610 MTZLIFTGATE 100 00 TOOL BOX COMBOS 17 DRAWER 20 DRAWER 23 DRAWER 17 Drawer Box with SKU 295815 MTZCOMBO1 4,49 + Overall Dimensions: 72 W x

More information

HEAVY DUTY ADAPTABLE CART

HEAVY DUTY ADAPTABLE CART SMALL PART & TOOL STORAGE PIPE CUTTING NOTCH SNAP IN HOOKS FLIP-UP SHELF ADJUSTABLE HANDLE LARGE STORAGE SHELF LOCKING CASTERS HEAVY DUTY ADAPTABLE CART UTILITY CARTS CARRY SUPPLIES OF ALL SHAPES AND SIZES.

More information

A century of Excellence... a legacy of Quality

A century of Excellence... a legacy of Quality 85" igh with Shelves Take advantage of your existing vertical space and save substantially by installing a Republic shelving mezzanine system. 10 Shelves 9 Openings 8 Shelves 14 Openings D Capacity 36"

More information