PARTS MANUAL. Flail - Rotary Mower. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas

Transcription

1 Flail - Rotary Mower Rev PARTS MANUAL Part No P ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas An Operator's Manual was shipped with the equipment in the Manual Canister. This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator's Manual is not with the equipment, contact your dealer or Alamo Industrial ( ) to obtain a Free copy before operating the equipment Alamo Group, Inc.

2

3 BOLT TORQUE Mounting procedures for mowers will require a significant amount of bolt nut and washer installation. Frame and structure mounting bolts should be installed using Red Loctite, and torqued to the dry values listed in the torque chart based on the bolt size and hardness. Other structures such as pump mounting bolts should be installed with Blue Loctite and torqued to the dry values indicated in the chart. Bolt tightness should be completed with and checked with a suitable torque wrench. Torque checks should be completed throughout the life of the mower in accordance with the maintenance chart provided in this manual. Loose bolts on a frame or in a casting may be a result of: Vibration from the mower due to imbalance of the mower blades Pulled threads due to over tightening Distortion of the hole due to under tightening during installation Bolts broken or sheared in the mounting structure or tractor may be the result of: Improper alignment of the Mounting Plate or Structure such that it is not sitting flat on the mating surface Distortion of the bolt due to over-tightening Under tightening of the bolts Check the bolt torque during installation and prior to delivery with a suitable torque wrench.

4 TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense! WARRANTY INFORMATION: Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that you retain. The use of "will-fit" parts will void your warranty and can cause catastrophic failure with possible injury or death.

5 CHANGE PAGES Date of Change Page Number (EXAMPLE ONLY: ECN##### - chg pages 17, 23, 137) document release date chg pgs chg pgs 22,52,54 Change Pages - 5

6 CHANGE PAGES The following is a listing of pages that have been changed since the latest publication date for the overall document. Change Pages - 6

7 PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section. 1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required. 2. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered. 3. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part. 4. The Manufacturer reserves the right to substitute parts where applicable. 5. Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order. 6. The Manufacturer reserves the right to change prices without prior notice. Note: Please refer to The Safety Section in the front of this Manual for the proper part number when ordering replacement safety decals. For maximum safety and to guarantee optimum product reliability, always use genuine Alamo Industrial Parts. The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to: ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Alamo Group Inc. Parts Section 2

8 PART NAME INDEX FLAIL HEAD ASY - 60 INCH (PART 1) - PN FLAIL HEAD ASY - 60 INCH (PART 2) - PN FLAIL HEAD SUB-ASY FLAIL HEAD SUB-ASY PULLEY ASY - FLAIL HEAD 1500 & ROLLER ASY - FLAIL HEAD 1500 & BEARING ASY FLAIL HEAD BEARING ASY FLAIL HEAD ROTOR SHAFT ASY - FLAIL HEAD 60 INCH ROTOR SHAFT ASY - FLAIL HEAD 80 INCH BLADE CARRIER ASY - PAN - PN BLADE CARRIER ASY - BAR - PN ROTARY HEAD ASY ROTARY HEAD ASY (NEW STYLE) ROTARY HEAD SUB-ASY ROTARY HEAD PRE-ASY (NEW STYLE) ROTARY HEAD - MOTOR ASY PARTS (PART 1) - PN ROTARY HEAD - MOTOR ASY PARTS (PART 2) - PN ROLLER ASY - ROTARY HEAD (OPTION) CHAIN GUARD ASY - FRONT (DEEP DECK) - PN COMMON BOX PARTS - PN CONTROL VALVE ASY - SN (05-06) & DOWN - PN CONTROL VALVE ASY - SN (06-06) & UP -PN CYLINDER ASY - LIFT - PN A CYLINDER ASY - TILT - PN A HYDRAULIC TANK SUB-ASY - PN MOTOR & SPINDLE ASY - PN SPINDLE & HOUSING ASY - PN B MOTOR ASY - FLAIL HEAD MOTOR ASY - FLAIL HEAD PARTS MOUNTING ARM ASY - PN OIL RESERVOIR ASY - PN SERVO CONTROLLED PISTON PUMP ASY (PART 1) - PN A SERVO CONTROLLED PISTON PUMP ASY (PART 2) - PN A CHARGE PUMP ADAPTER SUB-ASY - (SN TO CURRENT) - PN GAUGE WHEEL, SIDE MOUNT, DEEP DECK (OPTION) - PN Alamo Group Inc. Parts Section -3

9 FLAIL HEAD ASY - 60 INCH (PART 1) - PN Alamo Group Inc. Parts Section -4

10 FLAIL HEAD ASY - 60 INCH (PART 1) - PN Continued HEAD ASY, 60" FLAIL ( 1500 HEAD ) HEAD ASY, 80" FLAIL ( 2000 HEAD ) 1 NFS 1 SERIAL PLATE - BRAHMA DECAL, OPERATING INSTRUCTIONS, FLAIL ADAPTER REDUCER PRESSURE HOSE ( RED ) RETURN HOSE, W/90 DEG ELBOW ( ORANGE ) CASE DRAIN HOSE ( BLUE ) DECAL, MULTI-HAZARD FLAIL LOCKNUT BOLT NUT,TOPLOCK 5/8 NC PLC DECAL, USE REPAIR SHIELDS / GUARDS DECAL, SPANISH, TRANSLATE SAFETY MATERIAL DECAL, DANGER OIL LEAK DECAL, ALAMO GROUP ( 5X19 ) DECAL, PINCH POINT V-BELT HEX BOLT DECAL, PINCH POINT SCISSORS DECAL, CUTTING BLADES / THROWN OBJECTS, FLAIL CLAMP PLATE MOWER HEAD MOUNT PIN MOWER HEAD MOUNT WLD MT HEAD LINK PIN WLD MT VINYL TAPE BLUE 1/2" WIDE VINYL TAPE RED 1/2" WIDE VINYL TAPE GREEN 1/2" WIDE DECAL, BRAHMA 30" DECAL, BRAHMA PICTURE DECAL, USE GENUINE PARTS FLAIL METAL TACK PISTON MOTOR - INCLUDES THE FOLLOWING : 30A MOTOR KEY (REFERENCE ONLY) FLAIL HEAD - INCLUDESTHE FOLLOWING (5 ITEMS) BEARING ASY ROLLER ASY ROTOR SHAFT ASY COWL ASY MOTOR,PULLEY & BELT ASY. 31A FLAIL HEAD 2000 * - INCLUDES THE FOLLOWING ( 5 ITEMS ) MOTOR,PULLEY & BELT ASY Alamo Group Inc. Parts Section -5

11 FLAIL HEAD ASY - 60 INCH (PART 2) - PN Alamo Group Inc. Parts Section -6

12 FLAIL HEAD ASY - 60 INCH (PART 2) - PN Continued COWL ASY BEARING ASY ASY,ROTOR SHAFT ASY,ROLLER ADP HYD STGHT 16MB-16MJ ADP HYD ELBOW 8MB - 8MJ ADP HYD ELBOW 16MB-16MJ CORDURA SLEEVING-54 LG PLASTIC TIE 21 LG Alamo Group Inc. Parts Section -7

13 FLAIL HEAD SUB-ASY Alamo Group Inc. Parts Section -8

14 FLAIL HEAD SUB-ASY 1500 Continued TENSION PIN SETSCREW SETSCREW SETSCREW FLATWASHER - PLATED FLATWASHER - PLATED SPRING WASHER - PLATED SPRING WASHER - PLATED PLATED NUT PLATED NUT SELF - LOCKING NUT BOLT CUP SQUARE TOP DRIVE, GUARD BOTTOM DRIVE, GUARD BACKING STRIP FLEXIBLE GUARD CLAMP GUARD FLEXIBLE GUARD COWL FRT FIXED GUARD FRT ADJ GUARD FRT GUARD - PIVOT SPACER FRT GUARD - PIVOT PIN BOLT CUP SQUARE 2014 Alamo Group Inc. Parts Section -9

15 FLAIL HEAD SUB-ASY Alamo Group Inc. Parts Section -10

16 FLAIL HEAD SUB-ASY 2000 Continued TENSION PIN SETSCREW SETSCREW SETSCREW FLATWASHER - PLATED FLATWASHER - PLATED SPRING WASHER - PLATED SPRING WASHER - PLATED PLATED NUT PLATED NUT SELF - LOCKING NUT BOLT CUP SQUARE TOP DRIVE, GUARD BOTTOM DRIVE, GUARD BACKING STRIP FLEXIBLE GUARD CLAMP GUARD FLEXIBLE GUARD COWL FRT FIXED GUARD FRT ADJ GUARD FRT GUARD - PIVOT SPACER FRT GUARD - PIVOT PIN BOLT CUP SQUARE 2014 Alamo Group Inc. Parts Section -11

17 PULLEY ASY - FLAIL HEAD 1500 & PULLEY ASY. F/ 60" ( 1500 ) HEAD PULLEY ASY. F/ 80" ( 2000 ) HEAD PULLEY STUD WASHER SPRING WASHER NUT TAPERLOCK TAPERLOCK F/ 60" ( 1500 ) HEAD TAPERLOCK F/ 80" ( 2000 ) HEAD SCREW BELT KEY COVER PLATE PLATE 2014 Alamo Group Inc. Parts Section -12

18 PULLEY ASY - FLAIL HEAD 1500 & 2000 Continued MOTOR KEY (REFERENCE ONLY) 2014 Alamo Group Inc. Parts Section -13

19 ROLLER ASY - FLAIL HEAD 1500 & LEFT BRKT ( NOT SHOWN ) RIGHT BRKT CIRCLIP BEARING ( CAN USE BRG P/N ) BEARING KIT COMPLETE ( BOTH SIDES ), ITEMS 3,4,5,6,7,8 & 9 (AS REQUIRED) SEAL CAP GREASE NIPPLE WASHER SOCKET HEAD BOLT SPRING WASHER ROLLER - 60" ( 1500 ) HEAD ROLLER - 80" ( 2000 ) HEAD 2014 Alamo Group Inc. Parts Section -14

20 BEARING ASY FLAIL HEAD BEARING WASHER SPRING WASHER NUT WASHER SETSCREW SETSCREW SETSCREW GREASE NIPPLE CIRCLIP SEAL COLLAR ADJUSTING BOLT - DRIVE END ONLY HOUSING - DRIVE END ONLY HOUSING - NON DRIVE END ONLY GUARD - NON DRIVE END ONLY 2014 Alamo Group Inc. Parts Section -15

21 BEARING ASY FLAIL HEAD WASHER SETSCREW SETSCREW SPRING WASHER SHAKEPROOF WASHER NUT SOCKET CSK SCREW DISC-SHIELD BEARING ASY. ( DRIVE OR NON-DRIVE END ) BEARING PLATE-NON DRIVE ADJUSTING-BOLT BEARING PLATE-DRIVE END GUARD - NON DRIVE 2014 Alamo Group Inc. Parts Section -16

22 ROTOR SHAFT ASY - FLAIL HEAD 60 INCH ROTOR SHAFTASY, 60"( 1500 MM ) ROTOR SHAFT WLD MT, 60" ( 1500 MM ) BOLT SPRING WASHER LOCKNUT D-RING SHACKLE FLAIL KNIFE, ( STANDARD ) FLAIL KNIFE, SERRATED ( OPTIONAL ) 2014 Alamo Group Inc. Parts Section -17

23 ROTOR SHAFT ASY - FLAIL HEAD 80 INCH ROTOR SHAFT ASY, 80"( 2000 MM ) ROTOR SHAFT WLD MT, 80" ( 2000 MM ) BOLT SPRING WASHER LOCKNUT D-RING SHACKLE FLAIL KNIFE, ( STANDARD ) FLAIL KNIFE, SERRATED ( OPTIONAL ) 2014 Alamo Group Inc. Parts Section -18

24 BLADE CARRIER ASY - PAN - PN BLADE PAN ASY. W/ BLADES SLOTTED NUT ROLL PIN WASHER KEYED BLADE BOLT ( TORQUE TO 600 FT LBS ) BLADE PAN ASY. W/O BLADES BLADE BOLT BUSHING KEY BLADES ( MATCHED SET ) WEAR WASHER 2014 Alamo Group Inc. Parts Section -19

25 BLADE CARRIER ASY - BAR - PN BLADE BAR ASY HEX NUT HEAVY LOCKWASHER BLADE BOLT ( TORQUE TO 600 FT LBS ) BLADE BAR WLD MT BLADES ( MATCHED SET ) 2014 Alamo Group Inc. Parts Section -20

26 THIS PAGE INTENTIONALLY LEFT BLANK 2014 Alamo Group Inc. Parts Section -21

27 ROTARY HEAD ASY 2014 Alamo Group Inc. Parts Section -22

28 ROTARY HEAD ASY Continued HEAD, ASY, 60 PAN DEP DEK HEAD, ASY, BAR DEP DEK LOCKNUT TLM 1/2 NC PLC FLATWASHER 1/2 PL STD FLATWASHER STD 3/ HHCS 3/8 NC 2-1/2 PL LOCKNUT TLM 3/8-NC PLC HHCS 3/8-16UNC 1-1/2 PL HEXB 3/8 NC 3 PL DECAL-ALAMO IND. LOGO DECAL, PELIGRO DECAL-WARNING OIL LEAK DECAL,ALAMO INDUSTRIAL LOGO DECAL,USE/REPAIR GUARDS DECAL-BLADES THROWN OBJECTS HHCS 1/2-13UNC 1-1/4 PL PLASTIC TIE-ON 15 LG REAR FLAP 10 X 63 X 3/8 THK REAR CLAMP BAR DECAL-REPLACEMENT PARTS CORDURA SLEEVING-54 LG DECAL - PINCH POINTS ASY,FRT CNGD 60VM DP DK DECAL-MULTI HAZ PIN- MOWER HEAD MT PIN 1-1/ PRE-ASSEMBLY-60ROTARY /BAR PRE-ASSEMBLY-60ROTARY /PAN PLATE,S/N - BRAHMA ROTARY DECAL,NAME--BRAHMA 30(BLACK) DECAL,PICTURE - BRAHMA (BLACK) HOSE HOSE HOSE METAL TACK VINYL TAPE BLUE 1/2" WIDE VINYL TAPE WIDE VINYL TAPE RED 1/2" WIDE DECAL,RED REFLECTOR DECAL,YELLOW REFLECTOR 2014 Alamo Group Inc. Parts Section -23

29 ROTARY HEAD ASY (NEW STYLE) 2014 Alamo Group Inc. Parts Section -24

30 ROTARY HEAD ASY (NEW STYLE) Continued HEAD, ASY, 60" PAN DEEP DECK HEAD, ASY, 60" BAR DEEP DECK LOCKNUT TLM 1/2 NC PLC FLATWASHER, 1/2" PL STD FLATWASHER, 3/8" NC STD HHCS 3/8" NC 2-1/2" PL LOCKNUT, 3/8"-NC PLC HHCS 3/8" -16UNC 1-1/2" PL HEXB 3/8" NC 3" PL DECAL, ALAMO IND. LOGO DECAL, PELIGRO DECAL, WARNING OIL LEAK DECAL, ALAMO INDUSTRIAL LOGO DECAL, USE/REPAIR GUARDS DECAL, BLADES THROWN OBJECTS HHCS 1/2"-13UNC 1-1/4" PL PLASTIC TIE, 15" LG REAR FLAP, 10" X 63" X 3/8" THK REAR CLAMP BAR DECAL, REPLACEMENT PARTS CORDURA SLEEVING, 54" LG DECAL, PINCH POINTS ASY,FRT CNGD 60VM DP DK DECAL, MULTI HAZ PIN, MOWER HEAD MT PIN, 1-1/4" X 15-3/4"LG CHR PLT PRE-ASSEMBLY - 60" ROTARY /BAR PRE-ASSEMBLY - 60" ROTARY /PAN DECAL, NAME--BRAHMA 30(BLACK) DECAL, PICTURE - BRAHMA (BLACK) HOSE #16-16FJX -16FJX - 68" LG HOSE #16-16FJX -16FJX45-74" LG HOSE #16-16FJX -16FJX45-69" LG VINYL TAPE BLUE 1/2" WIDE VINYL TAPE GREEN 1/2" WIDE VINYL TAPE RED 1/2" WIDE DECAL, RED REFLECTOR DECAL, YELLOW REFLECTOR 2014 Alamo Group Inc. Parts Section -25

31 ROTARY HEAD SUB-ASY 2014 Alamo Group Inc. Parts Section -26

32 ROTARY HEAD SUB-ASY Continued ROTARY HEAD SUB-ASY, 60" W/BAR CARRIER ROTARY HEAD SUB-ASY, 60" W/PAN CARRIER LOCKWASHER FLATWASHER LOCKNUT LOCKNUT TEXAS YELLOW PAINT (REFERENCE ONLY) BOLT BLADE PAN ASY. 60" STUMP JUMPER BLADE BAR ASY SKID SHOE SPACER, 3-1/8 F/ BLADE PAN ONLY DECK WLD MT - DP. DK. BRAHMA BOLT, SOCKET HEAD USE W/ PAN ONLY (TORQUE TO 400 FT. LBS.) BOLT, SOCKET HEAD USE W/ BAR ONLY (TORQUE TO 400 FT. LBS.) MOTOR ASY. - W/ SPINDLE 13 2A PLOW BOLT LOCKWASHER NUT LOCKNUT TIE ROD MOTOR SUPPORT PLATE BOLT 20 W67 16 HARDENED WASHER 2014 Alamo Group Inc. Parts Section -27

33 ROTARY HEAD PRE-ASY (NEW STYLE) 2014 Alamo Group Inc. Parts Section -28

34 ROTARY HEAD PRE-ASY (NEW STYLE) Continued PRE-ASSEMBLY - 60 ROTARY / BAR PRE-ASSEMBLY - 60 ROTARY / PAN WLDMT.-MOWER DP. DK. BRAHMA FLATWASHER, STD 3/8" LOCKNUT, 3/8" NC PLC LOCKNUT, 3/4" NC GRC PL HEX HEAD BOLT, 3/4" NC 2-3/4" PL BLADE BAR ASY (OPTIONAL) PAN ASSEMBLY, 60 V/M STUMP (OPTIONAL) SKID SHOE ROTARY SPACER, 3-1/8" BLADE BAR LOCKWASHER, 3/4" PL HEAVY SOCKET HEAD BOLT, 3/4" NC 2" PL SOCKET HEAD BOLT, 3/4" NC 6" PL8 13 2A PLOW BOLT, 3/8" X 1 1/2" MOTOR ASY, W/ SPINDLE 2014 Alamo Group Inc. Parts Section -29

35 ROTARY HEAD - MOTOR ASY PARTS (PART 1) - PN Alamo Group Inc. Parts Section -30

36 ROTARY HEAD - MOTOR ASY PARTS (PART 1) - PN Continued MOTOR ASY, PISTON TYPE 4.91 CID BARREL HOUSING ASY VALVE PLATE NOZZLE, PLUG ASY, 7/8" HEXAGON BEARING HOUSING O-RING, 132 X O-RING, X SEAL CARRIER SHAFT SEAL SPACER WASHER RETAINING RING RETAINING RING SHAFT ASY, TYPE U CYLINDER BARREL BARREL SUPPORT PISTON ASY PISTON RING RING GEAR TAP ROL BEARING BEARING, TAPERED ROLLER SPACER WASHER (AS REQUIRED) RETAINING RING SHIM, 0.5 (AS REQUIRED) SHIM, 0.2 (AS REQUIRED) SHIM, 0.4 (AS REQUIRED) SHIM, 0.6 (AS REQUIRED) SHIM, 0.8 (AS REQUIRED) SHIM, 1.0 (AS REQUIRED) SHIM, 0.7 (AS REQUIRED) BOLT, SOCKET HEAD M12 X LOCKWASHER, M13 X GUIDE PIN RELIEF MANIFOLD RELIEF VALVE, SEAL KIT (AS REQUIRED) RELIEF VALVE, 280 BAR RELIEF VALVE, 330 BAR O-RING KEY, FLAT STEEL BALL PLUG, HEXAGON 2014 Alamo Group Inc. Parts Section -31

37 ROTARY HEAD - MOTOR ASY PARTS (PART 2) - PN Alamo Group Inc. Parts Section -32

38 ROTARY HEAD - MOTOR ASY PARTS (PART 2) - PN Continued O-RING PLUG ASY, HEX SOCKET PLUG ASY PLUG ASY REBUILD KIT SEAL KIT FOR MTR 2014 Alamo Group Inc. Parts Section -33

39 ROLLER ASY - ROTARY HEAD (OPTION) ROLLER KIT, 62" LOCKNUT TLM 1/2 NC PLC CARRIAGE BOLT ROLLER RIGHT ROLLER MOUNT - WLD MT LEFT ROLLER MOUNT - WLD MT SEAL BEARING 2014 Alamo Group Inc. Parts Section -34

40 CHAIN GUARD ASY - FRONT (DEEP DECK) - PN CABLE CLAMP CHAIN 5/16 WLD 8 LINK ZINC PL CABLE, 1/4 GA AIRCRAFT (7X19) BRKT,CHAIN GUARD DEEP DECK 2014 Alamo Group Inc. Parts Section -35

41 COMMON BOX PARTS - PN Alamo Group Inc. Parts Section -36

42 COMMON BOX PARTS - PN Continued COMMON BOX, BRAHMA LOCKWASHER LOCKNUT TLM 1/2 NC PLC FLATWASHER NUT BOLT DECAL, DANGER MULTI-HAZARD - FLAIL DECAL, DANGER MULTI-HAZARD - ROTARY STRAP PIN COTTER PIN DECAL PELIGRO BRASS WASHER, SPECIAL BOLT LOCKNUT ALAMO, WARRANTY CARD BOLT BOLT DECAL, AG LOGO PUSH-PULL SWITCH SWITCH KNOB DECAL, PROPER ENGINE RPM DECAL, WARNING HOSE BURST DECAL, AW ISO VG100 TRACTER HYD.FLUID BUMPER WLD MT DECAL, PRESSURIZED TANK OIL RESERVOIR ASY - BRAHMA PARTS & OPERATORS MANUAL TANK & PUMP COVER WLD MT DUAL AXIS - JOYSTICK 29A BALL JOINT PIVOT - PLASTIC BALL (NOT SHOWN )) 29B BALL JOINT PIVOT - DIE CAST METAL (NOT SHOWN ) CABLE CONNECTION KIT PUMP SOLENOID - WIRE HARNESS (INCLUDES ITEM 32) FUSE (REFERENCE ONLY) SPOOL VALVE ASY - BRAHMA DECAL, NAME BRAHMA DECAL, JOYSTICK INSTRUCTIONS BOLT FLATWASHER 2014 Alamo Group Inc. Parts Section -37

43 CONTROL VALVE ASY - SN (05-06) & DOWN - PN CONTROL VALVE ASY ADAPTER, HYD ELBOW ADAPTER, HYD TEE ADAPTER, HYD STRAIGHT VINYL TAPE RED 1/2" WIDE VINYL TAPE BLUE 1/2" WIDE VINYL TAPE BLUE 1/4" WIDE VINYL TAPE GREEN 1/2" WIDE VINYL TAPE GREEN 1/ VINYL TAPE ORANGE 1/2" WIDE DIRECTIONAL CONTROL VALVE ADAPTER, HYD STRAIGHT RESTRICTOR-ORFICE, ONE WAY 2014 Alamo Group Inc. Parts Section -38

44 CONTROL VALVE ASY - SN (05-06) & DOWN - PN Continued ADAPTER, HYD ELBOW INLET DOUBLE ACTION FLOAT SINGLE ACTION OUTLET COVER STUD ASY POWER BEYOND 2014 Alamo Group Inc. Parts Section -39

45 CONTROL VALVE ASY - SN (06-06) & UP -PN CONTROL VALVE ASY HYD. ADAPTER ELBOW HYD. ADAPTER TEE HYD. ADAPTER STRAIGHT VINYL TAPE RED 1/2" WIDE VINYL TAPE BLUE 1/2" WIDE VINYL TAPE BLUE 1/4" WIDE VINYL TAPE GREEN 1/2" WIDE VINYL TAPE GREEN 1/ VINYL TAPE ORANGE 1/2" WIDE DIRECTIONAL CONTROL VALVE HYD. ADAPTER STRAIGHT ONE WAY RESTRICTOR-ORFICE HYD. ADAPTER ELBOW DETENT CAP VALVE VALVE SECTION TILT SPOOL POSITIONER KIT 4-POS DET 2014 Alamo Group Inc. Parts Section -40

46 CONTROL VALVE ASY - SN (06-06) & UP -PN Continued DETENT KIT VALVE SECTION LIFT VALVE END PLATE MAIN RELIEF PSI VALVE SECTION-INLET COVER VALVE HANDLE FROM VALVE HANDLE CONNECTION KIT POWER BEYOND, V Alamo Group Inc. Parts Section -41

47 CYLINDER ASY - LIFT - PN A A 1 HYD LIFT CYL (10-1/2 X 3-1/2 BORE) SEAL KIT TUBE WLDMNT (LIFT CYL) LOCKNUT PISTON ROD WLDMNT (LIFT CYL) HEAD GLAND (LIFT CYL) BUSHINGS 2014 Alamo Group Inc. Parts Section -42

48 CYLINDER ASY - TILT - PN A A 1 HYD TILT CYL. (12-13/16) SEAL KIT TUBE WLD MT (TILT CYL.) LOCKNUT PISTON ROD WLD MT (TILT CYL.) HEAD GLAND (TILT CYL.) BUSHINGS 2014 Alamo Group Inc. Parts Section -43

49 HYDRAULIC TANK SUB-ASY - PN HYDRAULIC TANK SUB-ASY LOCKWASHER BOLT STARWASHER PIPE TEE MAGNETIC PLUG TANK WLD MT SUCTION STRAINER FILLER/BREATHER CAP ASY GAUGE, SIGHT & TEMP MACHINE SCREW, SLOTTED HEX REDUCER BUSHING LOCKWASHER 2014 Alamo Group Inc. Parts Section -44

50 HYDRAULIC TANK SUB-ASY - PN Continued LOCKWASHER FLATWASHER LOCKNUT 2014 Alamo Group Inc. Parts Section -45

51 MOTOR & SPINDLE ASY - PN Alamo Group Inc. Parts Section -46

52 MOTOR & SPINDLE ASY - PN Continued MOTOR & SPINDLE ASY LOCKWASHER HYD. ADAPTER ELBOW SPLIT FLANGE KIT GREASE NLGI "000" ( NOT SHOWN, SEE MAINTENCE SECTION ) (REFERENCE ONLY) BOLT HYD. ADAPTER STRAIGHT B 1 SPINDLE HOUSING - SPINDLE ASY.(SEE SPINDLE HOUSING & SPINDLE ASY.) SPINDLE / MOTOR - GASKET B 1 PISTON MOTOR ASY RB 1 PISTON MOTOR ASY ( REBUILT UNIT ) (REFERENCE ONLY) SEAL KIT, VALVE BLOCK TO MOTOR RELIEF CARTRIDGE, 4000 PSI O-RING ( F/ ) O-RING ( F/ ) O-RING ( F/ ) BACK-UP RING ( F/ ) 2014 Alamo Group Inc. Parts Section -47

53 SPINDLE & HOUSING ASY - PN B B 1 SPINDLE & HOUSING ASY, SPLINED MACHINED SPINDLE HOUSING SPINDLE - MACHINED BEARING RING SEAL SNAP RING BEARING (BOTTOM) BEARING (TOP) LOCKNUT, SPINDLE BEARING GREASE RELIEF FITTING GREASE FITTING 1/8" STRAIGHT RETAINING RING COVER, SPINDLE GREASE 2014 Alamo Group Inc. Parts Section -48

54 MOTOR ASY - FLAIL HEAD PISTON MOTOR, 2.48 CU.IN./REV W/O FITTINGS KEY O-RING GASKET HYD. ADAPTER HYD. ADAPTER HYD. ADAPTER HYD. ADAPTER O-RING GASKET SEAL KIT ( FOR P/N MOTOR ) 2014 Alamo Group Inc. Parts Section -49

55 MOTOR ASY - FLAIL HEAD PARTS 2014 Alamo Group Inc. Parts Section -50

56 MOTOR ASY - FLAIL HEAD PARTS Continued MOTOR,PISTON-2.48 CU.IN./REV ASSY, ROTATING KIT O-RING KIT,HIGH PRESSURE, SEAL & RING WASHER BRG. & RACE SET SEAL KIT 2014 Alamo Group Inc. Parts Section -51

57 MOUNTING ARM ASY - PN Alamo Group Inc. Parts Section -52

58 MOUNTING ARM ASY - PN Continued MOUNTING ARM ASY, BRAHMA BOLT BOLT LOCKNUT TEFLON BEARING TEFLON BEARING HOSE - 47"LG BULKHEAD FITTING - 45 DEG FITTING - 90 DEG DECAL, PINCH POINTS DECAL, HOSE BURST TEFLON BEARING IMPREG A 1 HYD. TILT CYL.( SEE LIFT &TILT CYL.) A 1 HYD. LIFT CYL.( SEE LIFT &TILT CYL.) WLDMT, HEAD PIVOT ARM BASE PIN LINK BASE CYLINDER PIN MACHINED ARM, BRAHMA CYLINDER ROD PIN MACHINED, CYLINDER LINK CYLINDER ROD PIN MACHINED, CYLINDER LINK CYLINDER BASE PIN VINYL TAPE BLUE 1/2" WIDE VINYL TAPE BLUE 1/4" WIDE VINYL TAPE GREEN 1/2" WIDE VINYL TAPE GREEN 1/4" WIDE VINYL TAPE BLUE 1/2" WIDE VINYL TAPE WIDE VINYL TAPE RED 1/2" WIDE METAL TACK SERIAL PLATE - BRAHMA ARM DOUBLE CLEVIS HAIRPIN CHAIN 35 15C HARDENED WASHER 1-1/4" PIN- MOWER HEAD MT Alamo Group Inc. Parts Section -53

59 OIL RESERVOIR ASY - PN Alamo Group Inc. Parts Section -54

60 OIL RESERVOIR ASY - PN Continued OIL RESERVOIR ASY HHCS 3/8 NC X 3/4 PL ADP HYD STGHT 16MP-16MJ ADP HYD ELBOW 12MP-12MJ ADP HYD STGHT 10MB-8MJ ADP HYD STGHT 8MJ-8MP ADP HYD ELBOW 16MB -16MJ ADP HYD ELBOW 16MB-12MJ PUMP, FRONT-SERVO (INCLUDES SOLENOID SERVO CONTROL) RB 1 PUMP, FRONT-SERVO REBUILT (REFERENCE ONLY) HOSE 8-8FJX - 8FJX90-15LG HOSE 12-12FJX -12FJX ADP HYD STGHT 16MB - 8MJ TANK SUB-ASY VINYL TAPE RED 1/2" WIDE VINYL TAPE WIDE VINYL TAPE BLUE 1/2" WIDE PRESSURE FILTER HEAD ASY PRESS FILTER ASY HIGH ALLOY, LOCKWASHER 3/8 YZ PLUG ADP HYD STGHT 12MB-8MJ COIL ASY (OLD STYLE - SQUARE) ASY, CARTRIDGE VALVE W/O COIL 2014 Alamo Group Inc. Parts Section -55

61 SERVO CONTROLLED PISTON PUMP ASY (PART 1) - PN A 2014 Alamo Group Inc. Parts Section -56

62 SERVO CONTROLLED PISTON PUMP ASY (PART 1) - PN A Continued NUT, JAM RING, RETAINING RING, RETAINING WASHER, SEAL SCREW, CAP ROTATING KIT, SUBASSY SERVO PISTON SUBASSY FOLLOWER, SERVO PISTON PLATE, COVER GASKET, COVER PLATE GASKET, HOUSING PLATE, COVER CAMPLATE, SUBASSY RELIEF VALVE SUBASSY O-RING.116 DIA X.924INSIDE SCREW, CAP SCREW, CAP PLATE, VALVE HOUSING SUBASSY HOUSING BEARING (PRESS FIT) PLUG, SUBASY O-RING.064 DIA X.239INSIDE ** SUB-ASY, CRADLE, SERVO PUMP PIN, DOWEL, SERVO PUMP BUSHING, CRADLE ** CAP SCREW, BUTTON HEAD CAP SCREW SEAL SUBASY BACKPLATE SUBASSY BEARING, PRESS FIT ROLL PIN KIT, COVER PLATE FOR SAE A O-RING SCREW CAP PLATE, COVER O-RING MOLDED WASHER 2014 Alamo Group Inc. Parts Section -57

63 SERVO CONTROLLED PISTON PUMP ASY (PART 2) - PN A 2014 Alamo Group Inc. Parts Section -58

64 SERVO CONTROLLED PISTON PUMP ASY (PART 2) - PN A Continued PLUG, SUBASSY O-RING.087 DIA X.644INSIDE PLUG, SUBASSY O-RING.116 DIA X.924INSIDE KEY SEAL PUMP SHAFT CHARGE PUMP ASSEMBLY BUSHING, PRESS FIT W/11 TOOTH PLUG O-RING SHIM (1)NOTE: MAY REQUIRE MORE SPRING POPPET RING, GEROTER, INNER RING, GEROTER, OUTER ORIFICE, CONTROL VALVE COUPLER RING, RETAINING PLUG SUBASSY WASHER WASHER WASHER RING LOCK CARTRIDGE SOL VLV 3-WAY 2-POS COIL 12VDC (ROUNDED) KIT,SOLENOID SERVO CONTROL SEAL KIT - PUMP SHAFT, PISTON PUMP 2014 Alamo Group Inc. Parts Section -59

65 CHARGE PUMP ADAPTER SUB-ASY - (SN TO CURRENT) - PN Alamo Group Inc. Parts Section -60

66 CHARGE PUMP ADAPTER SUB-ASY - (SN TO CURRENT) - PN Continued BUSHING, PRESS FIT W/11 TOOTH PLUG O-RING SHIMS SPRING POPPET 2014 Alamo Group Inc. Parts Section -61

67 GAUGE WHEEL, SIDE MOUNT, DEEP DECK (OPTION) - PN GUAGE WHEEL, SIDE MOUNT, DEEP DECK LOCKNUT TLM 1/2 NC PLC COTTERPIN BOLT, HEX HEAD PIN WELDMENT WHEEL MOUNTING WELDMENT D 1 HUB ASY H 1 WHEEL AND TIRE ASY 2014 Alamo Group Inc. Parts Section -62

68 GAUGE WHEEL, SIDE MOUNT, DEEP DECK (OPTION) - PN Continued C2C 2 BUSHING 9 5DR NUT, SLOTTED 2014 Alamo Group Inc. Parts Section -63

69

70 TO THE OWNER/OPERATOR/DEALER To keep your implement running efficiently and safely, read your manuals thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT ( Subpart C) makes these minimum safety requirements of tractor operators: REQUIRED OF THE OWNER 1. Provide a Roll-Over-Protective Structure that meets the requirements of this standard. 2. Provide seat belts that meet the requirements of this paragraph of this standard and SAE J4C. 3. Ensure that each employee uses such seat belt while the tractor is moving. 4. Ensure that each employee tightens the seat belt sufficiently to confine the employee to the protected area provided by the ROPS. REQUIRED OF THE OPERATOR 1. Securely fasten seat belt if the tractor has a ROPS. 2. Where possible, avoid operating the tractor near ditches, embankments, and holes. 3. Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces. 4. Stay off slopes too steep for safe operation. 5. Watch where you are going, especially at row ends, on roads, and around trees. 6. Do not permit others to ride. 7. Operate the tractor smoothly, no jerky turns, starts, or stops. 8. Hitch only to the draw bar and hitch points recommended by the tractor manufacturer. 9. When the tractor is stopped, set brakes securely and use park lock, if available. Keep children away from danger all day, every day... Equip tractors with rollover protection (ROPS) and keep all machinery guards in place... Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens.

71 ALAMO INDUSTRIAL Limited Warranty 1. Limited Warranties Alamo industrial warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser ( purchaser ) and warrants for six months to the original commercial or industrial purchaser ( purchaser ) that the goods purchased are free from defects in material or workmanship Manufacturer will replace for the purchaser any part or parts found, upon examination at one of its factories, to be defective under normal use and service due to defects in material or workmanship This limited warranty does not apply to any part of the goods which has been subjected to improper or abnormal use, negligence, alteration, modification, or accident, damaged due to lack of maintenance or use of wrong fuel, oil, or lubricants, or which has served its normal life. This limited warranty does not apply to any part of any internal combustion engine, or expendable items such as blades, shields, guards, or pneumatic tires except as specifically found in your operator s manual Except as provided herein, no employee, agent, dealer, or other person is authorized to give any warranties of any nature on behalf of manufacturer. 2. Remedies And Procedures This limited warranty is not effective unless the purchaser returns the registration and warranty form to manufacturer within 30 days of purchase Purchaser claims must be made in writing to the authorized dealer ( dealer ) from whom purchaser purchased the goods or an approved authorized dealer ( dealer ) within 30 days after purchaser learns of the facts on which the claim is based Purchaser is responsible for returning the goods in question to the dealer If after examining the goods and/or parts in question, manufacturer finds them to be defective under normal use and service due to defects in material or workmanship, manufacturer will: (A) repair or replace the defective goods or part(s) or (B) reimburse purchaser for the cost of the part(s) and reasonable labor charges (as determined by manufacturer) if purchaser paid for the repair and/or replacement prior to the final determination of applicability of the warranty by manufacturer. The choice of remedy shall belong to manufacturer Purchaser is responsible for any labor charges exceeding a reasonable amount as determined by manufacturer and for returning the goods to the dealer, whether or not the claim is approved. Purchaser is responsible for the transportation cost for the goods or part(s) from the dealer to the designated factory. 3. Limitation Of Liability Manufacturer disclaims any express (except as set forth herein) and implied warranties with respect to the goods including, but not limited to, merchantability and fitness for a particular purpose Manufacturer makes no warranty as to the design, capability, capacity, or suitability for use of the goods Except as provided herein, manufacturer shall have no liability or responsibility to purchaser or any other person or entity with respect to any liability, loss, or damage caused or alleged to be caused directly or indirectly by the goods including, but not limited to, any indirect, special, consequential, or incidental damages resulting from the use or operation of the goods or any breach of this warranty. Not withstanding the above limitations and warranties, manufacturer s liability hereunder for damages incurred by purchaser or others shall not exceed the price of the goods No action arising out of any claimed breach of this warranty or transactions under this warranty may be brought more than two (2) years after the cause of action has occurred. 4. Miscellaneous Proper venue for any lawsuits arising from or related to this limited warranty shall be only in Guadalupe county, Texas Manufacturer may waive compliance with any of the terms of this limited warranty, but no waiver of any terms shall be deemed to be a waiver of any other term If any provision of this limited warranty shall violate any applicable law and is held to be unenforceable, then the invalidity of such provision shall not invalidate any other provisions herein Applicable law may provide rights and benefits to purchaser in addition to those provided herein. Keep for your records Attention: Purchaser should fill in the blanks below for his reference when buying repair parts and/or for proper machine identification when applying for warranty. Alamo Industrial Implement Model Serial Number Date Purchased Dealer Attention: Read your operator s manual ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas

72

73 1502 E. Walnut St. Seguin, Texas Sales and Marketing Tel Fax Warranty Registration/Claims Return Authorizations Online Part Orders Techical Information Tel Fax Brahma Rotary/Flail Parts Manual (PUB 07-06) P/N P