PARTS MANUAL. 17, 21 & 24 Boom. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas

Transcription

1 17, 21 & 24 Boom Rev PARTS MANUAL Part No P ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas An Operator's Manual was shipped with the equipment in the Manual Canister. This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator's Manual is not with the equipment, contact your dealer or Alamo Industrial ( ) to obtain a Free copy before operating the equipment Alamo Group, Inc.

2

3 BOLT TORQUE Mounting procedures for mowers will require a significant amount of bolt nut and washer installation. Frame and structure mounting bolts should be installed using Red Loctite, and torqued to the dry values listed in the torque chart based on the bolt size and hardness. Other structures such as pump mounting bolts should be installed with Blue Loctite and torqued to the dry values indicated in the chart. Bolt tightness should be completed with and checked with a suitable torque wrench. Torque checks should be completed throughout the life of the mower in accordance with the maintenance chart provided in this manual. Loose bolts on a frame or in a casting may be a result of: Vibration from the mower due to imbalance of the mower blades Pulled threads due to over tightening Distortion of the hole due to under tightening during installation Bolts broken or sheared in the mounting structure or tractor may be the result of: Improper alignment of the Mounting Plate or Structure such that it is not sitting flat on the mating surface Distortion of the bolt due to over-tightening Under tightening of the bolts Check the bolt torque during installation and prior to delivery with a suitable torque wrench.

4 TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense! WARRANTY INFORMATION: Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that you retain. The use of "will-fit" parts will void your warranty and can cause catastrophic failure with possible injury or death.

5 CHANGE PAGES Date of Change Page Number Description of Change (EX:chg pages 17, 23, 137) document release date chg pg chg pgs chg pgs 56,58, chg pg chg pgs 8, 11, chg pgs chg pg chg pgs , obs/alt to chg pgs chg pgs added to bom Change Pages - 5

6 CHANGE PAGES The following is a listing of pages that have been changed since the latest publication date for the overall document. Change Pages - 6

7 PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section. 1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required. 2. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered. 3. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part. 4. The Manufacturer reserves the right to substitute parts where applicable. 5. Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order. 6. The Manufacturer reserves the right to change prices without prior notice. Note: Please refer to The Safety Section in the front of this Manual for the proper part number when ordering replacement safety decals. For maximum safety and to guarantee optimum product reliability, always use genuine Alamo Industrial Parts. The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to: ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Alamo Group Inc. Parts Section 2

8 PART NAME INDEX 48 IN FLAIL AXE - STD KNIVES - PN M IN FLAIL AXE - SHD GRASS - ES KN PN IN FLAIL AXE - SHD GRASS - ES KN PN M TO CURRENT IN FLAIL AXE HEAD ASY (PART 1) - PN IN FLAIL AXE HEAD ASY (PART 2) - PN IN ROTARY BLADE PAN ASY - PN IN BOOM AXE HEAD ASSEMBLY PN IN BOOM AXE HEAD SUB ASSEMBLY PN IN MOTOR & SPINDLE ASY IN MOTOR ASY - PARTS (PART 1) - PN IN MOTOR ASY - PARTS (PART 2) - PN IN SPINDLE ASY - PN B IN BLADE BAR ASY - PN IN DOOR CYL ASY - PN A IN HEAD ASY - SN & DOWN IN HEAD ASY - SN & UP IN HEAD SUB-ASY - SN & DOWN IN HEAD SUB-ASY - SN & UP IN MOTOR ASY - PARTS - SN (PART 1) - PN IN MOTOR ASY - PARTS - SN (PART 2) - PN IN SPINDLE ASY - PN A BOOM ASY - 17 FT (STD STEEL) - PN BOOM ASY - 17 FT (OPT ALLOY STEEL) - PN BOOM ASY - 21 FT (STD STEEL) PN BOOM ASY - 21 FT (OPT ALLOY STEEL) PN BOOM ASY - 24 FT (STD STEEL) - PN BOOM ASY - 24 FT (OPT ALLOY STEEL) (PART1) - PN BOOM ASY - 24 FT (OPT ALLOY STEEL) (PART 2) - PN BOOM HOSE SCHEMATIC - 17 FT BOOM ARM BOOM HOSE SCHEMATIC - 21 FT BOOM ARM BOOM HOSE SCHEMATIC - 24 FT BOOM ARM BUZZBAR ASY - 48 IN (PART 1) - PN BUZZBAR ASY - 48 IN (PART 2) - PN BUZZBAR ASY - 48 IN (PART 3) - PN BUZZBAR ASY - 69 IN (PART 1) - PN BUZZBAR ASY - 69 IN (PART 2) - PN BUZZBAR ASY - 69 IN (PART 3) - PN BUZZBAR ASY - 90 IN (PART 1) - PN BUZZBAR ASY - 90 IN (PART 2) - PN BUZZBAR ASY - 90 IN (PART 3) - PN Alamo Group Inc. Parts Section -3

9 PART NAME INDEX BUZZBAR MOTOR ASSEMBLY BUZZBAR SPINDLE ASY - SN BB DITCHER - BLADE CARRIER ASY DITCHER - HOUSING ASY DITCHER - SPINDLE ASY DITCHER BLADE HEAD ASY - ROUGH CUT DITCHER HEAD ASY - (NEW STYLE) DITCHER HEAD ASY - (OLD STYLE) DITCHER HEAD DEFLECTOR CYLINDER FILTER ASY - PN FILTER ASY - PN FLAIL AXE - DOOR CYL ASY - PN A FLAIL AXE - HOSE CONNECTIONS FML100H FLAIL - HEAD ASY (PART 1) FML100H FLAIL - HEAD ASY (PART 2) FML100H FLAIL - HEAD ASY (PART 3) FML100H FLAIL - SPINDLE ASY - PN GRASS FLAIL - CUTTERSHAFT ASY GRASS FLAIL - CUTTERSHAFT BRGS GRASS FLAIL - HEAD ASY PN GRASS FLAIL - HEAD SUB-ASY GRASS FLAIL - PULLEY ASY GRASS FLAIL - ROLLER ASY HIGH FRAME ASY - 2 WD & 4 WD HYD CYL ASY - DIPPER - PN A (21 & 24 FT) HYD CYL ASY - DIPPER - PN (17 FT) HYD CYL ASY - LIFT - PN A HYD CYL ASY - SWING - PN A HYD CYL ASY - TILT - PN A HYD LOCK VALVE SOLENOID ASY - PN (OLD STYLE) HYD LOCK VALVE SOLENOID ASY - PN A (NEW STYLE) HYD TANK ASY - PN (OCFD) & PN (CCLS) HYD TANK SUB-ASY - PN JOYSTICK CONSOLE ASY KING POST SUB-ASY MOUNTING COMPONENTS - COMMON BOX (PART 1) MOUNTING COMPONENTS - COMMON BOX (PART 2) MOUNTING COMPONENTS - COMMON BOX (PART 3) PISTON PUMP - PISTON CCW 3.0 CID HYSTAT (PART 1)- PN A Alamo Group Inc. Parts Section -4

10 PART NAME INDEX PISTON PUMP - PISTON CCW 3.0 CID HYSTAT (PART 2)- PN A TIMBERCAT - HEAD ASY (PART 1) TIMBERCAT - HEAD ASY (PART 2) VALVE - PARTS - OPEN & CLOSED CENTER VALVE ASY - 5 SPOOL (CCLS) VALVE ASY - 5 SPOOL (OCFD) Alamo Group Inc. Parts Section -5

11 48 IN FLAIL AXE - STD KNIVES - PN M 2018 Alamo Group Inc. Parts Section -6

12 48 IN FLAIL AXE - STD KNIVES - PN M Continued M 1 ROTOR W/KNIVES (FLAIL AXE) WLDMT FLAIL ROTOR KIT - BLADE, FLAIL AXE HHCS HANGER BOLT PER DWG TOP LOCKNUT NYLON 5/8 NC PL BUSHING 2018 Alamo Group Inc. Parts Section -7

13 48 IN FLAIL AXE - SHD GRASS - ES KN PN PIN ROLL 5/32X Alamo Group Inc. Parts Section -8

14 48 IN FLAIL AXE - SHD GRASS - ES KN PN Continued NUT,1/2NF CENTERLOCK FLATWASHER 1/2 PL STD NUT JAM HEX 5/8 NC PL LOCKNUT TLM 3/8-NC PLC HHCS, 1/2"-13 NC x 1-1/2" PL HEXB 5/16 X 1 NC GR CARB 3/8 NC 1-1/4 PL FLATWASHER 5/16 PL HHCS 1/2 NC X 2 GR.5 PL NUT,HEX TOPLOCK 3/4 NC GR.C PL BOLT 3/8 NC GR8 X 1-1/ LOCKNUT TLM 1/2 NC PLC HHCS 1/2 NF 1-1/2 PL HEXB 3/4-10UNC 2 PL RUBBER FLAP 6 X 48-1/ RUBBER FLAP 6 X 48-1/ WLDMT, SKID SHOE ROLLER BEARING AND FLANGE ASY, CTRSHFT, SHD, E.S. KNIVES A 2 FLANGE BEARING ASY 2 BORE KEY 1/2 X 1/2 X 1 7/8LG LOCKNUT TLM 5/16 NC PLB CARB 5/8-11UNC 3LG PL PULLEY, 3G5V-8.50 DIA BUSHING,QD-HUB SF 1-15/16 DIA WLDMNT, HOUSING, F/AXE 48" WLDMT HITCH POST PLATE,HITCH POST CLAMP PLATE,COVER,BELT & PULLEY ROD,HINGE,F/A DOOR WELDMENT,DOOR, FLAIL AXE V-BELT WELDMENT,ROLLER SHSS 3/8-NF X 1-1/2 PL WELDMENT,SKID SHOE WASHER,2OD,7/16 ID X 3/ WLDMT MOTOR MOUNT W/O STUDS PLATE,INSIDE PLATE A 1 HYD CYL 1-1/2BORE X 3-3/ HUB QD-SF 1-1/8DIA.BORE MOTOR,PISTON-2.48 CU.IN./REV 2018 Alamo Group Inc. Parts Section -9

15 48 IN FLAIL AXE - SHD GRASS - ES KN PN Continued STEP KEY 1/4 X 5/ NUT, JAM 3/8 NF PLB PIN, 1-1/2 X 9 CHROME WELDMENT, PIN /2LG FLATWASHER 1-3/8 TYPE B NARROW PIN, COTTER 5/16 X 2-1/2 PL NUT SLOT 1-3/8 12NF PLB HHCS 3/8 NC 2-3/4 PL GUARD,BEARING HHCS 5/8 NC 1-3/4 PL HEXB 3/4 NC 4 PL HHCS 1/2NC X 3-1/4 PL NUT,TOPLOCK 5/8 NC PLC HHCS 5/8-11 X 1-1/2 PL ADP HYD ELBOW 4MB-4MJ ADP HYD ELBOW 16MB -16MJ HOSE #8-8JFX - 8FJX - 60LG ADP HYD STGHT 8MB - 8MJ HOSE #16-16FJX-16FJX-60LG HOSE #16-16FJX-16FJX-60LG HOSE #16-16FJX -16FJX - 60LG VINYL TAPE RED 1/2" WIDE VINYL TAPE GREEN 1/2" WIDE VINYL TAPE BLUE 1/2" WIDE HOSE #4-4FJX - 4FJX -107LG HOSE #4-4FJX - 4FJX -107LG PAINT,TEXAS YELLOW FLATWASHER 5/8 PL STD WASHER,LOCK 5/8 GR8 - YDP 2018 Alamo Group Inc. Parts Section -10

16 48 IN FLAIL AXE - SHD GRASS - ES KN PN M TO CURRENT PIN ROLL 5/32X NUT,1/2NF CENTERLOCK FLATWASHER 1/2 PL STD NUT JAM HEX 5/8 NC PL LOCKNUT TLM 3/8-NC PLC HHCS, 1/2"-13 NC x 1-1/2" PL HEXB 5/16 X 1 NC GR CARB 3/8 NC 1-1/4 PL FLATWASHER 5/16 PL HHCS 1/2 NC X 2 GR.5 PL NUT,HEX TOPLOCK 3/4 NC GR.C PL BOLT 3/8 NC GR8 X 1-1/ LOCKNUT TLM 1/2 NC PLC HHCS 1/2 NF 1-1/2 PL Alamo Group Inc. Parts Section -11

17 48 IN FLAIL AXE - SHD GRASS - ES KN PN M TO CURRENT Continued HEXB 3/4-10UNC 2 PL RUBBER FLAP 6 X 48-1/ RUBBER FLAP 6 X 48-1/ WLDMT, SKID SHOE ROLLER BEARING AND FLANGE ASY, CTRSHFT, SHD, E.S. KNIVES A 2 FLANGE BEARING ASY 2 BORE KEY 1/2 X 1/2 X 1 7/8LG LOCKNUT TLM 5/16 NC PLB CARB 5/8-11UNC 3LG PL PULLEY, 3G5V-8.50 DIA BUSHING,QD-HUB SF 1-15/16 DIA WLDMNT, HOUSING, F/AXE 48" WLDMT HITCH POST PLATE,HITCH POST CLAMP PLATE,COVER,BELT & PULLEY ROD,HINGE,F/A DOOR WELDMENT,DOOR, FLAIL AXE V-BELT WELDMENT,ROLLER SHSS 3/8-NF X 1-1/2 PL WELDMENT,SKID SHOE WASHER,2OD,7/16 ID X 3/ WLDMT MOTOR MOUNT W/O STUDS PLATE,INSIDE PLATE A 1 HYD CYL 1-1/2BORE X 3-3/ HUB QD-SF 1-1/8DIA.BORE MOTOR,PISTON-2.48 CU.IN./REV STEP KEY 1/4 X 5/ NUT, JAM 3/8 NF PLB PIN, 1-1/2 X 9 CHROME WELDMENT, PIN /2LG FLATWASHER 1-3/8 TYPE B NARROW PIN, COTTER 5/16 X 2-1/2 PL NUT SLOT 1-3/8 12NF PLB HHCS 3/8 NC 2-3/4 PL GUARD,BEARING HHCS 5/8 NC 1-3/4 PL HEXB 3/4 NC 4 PL HHCS 1/2NC X 3-1/4 PL NUT,TOPLOCK 5/8 NC PLC 2018 Alamo Group Inc. Parts Section -12

18 48 IN FLAIL AXE - SHD GRASS - ES KN PN M TO CURRENT Continued HHCS 5/8-11 X 1-1/2 PL ADP HYD ELBOW 4MB-4MJ ADP HYD ELBOW 16MB -16MJ HOSE #8-8JFX - 8FJX - 60LG ADP HYD STGHT 8MB - 8MJ HOSE #16-16FJX-16FJX-60LG HOSE #16-16FJX-16FJX-60LG HOSE VINYL TAPE RED 1/2" WIDE VINYL TAPE BLUE 1/ VINYL TAPE ORANGE 1/ HOSE #4-4FJX - 4FJX -107LG HOSE #4-4FJX - 4FJX -107LG PAINT,TEXAS YELLOW FLATWASHER 5/8 PL STD WASHER,LOCK 5/8 GR8 - YDP 2018 Alamo Group Inc. Parts Section -13

19 48 IN FLAIL AXE HEAD ASY (PART 1) - PN FLAIL AXE (BELT DRIVEN), 48" FLAIL AXE (BELT DRIVE) W/GRASS PIN ROLL 5/32X NUT,1/2NF CENTERLOCK FLATWASHER 1/2 PL STD NUT JAM HEX 5/8 NC PL LOCKNUT TLM 3/8-NC PLC HHCS, 1/2"-13 NC x 1-1/2" PL HEXB 5/16 X 1 NC GR CARB 3/8 NC 1-1/4 PL FLATWASHER 5/16 PL 2018 Alamo Group Inc. Parts Section -14

20 48 IN FLAIL AXE HEAD ASY (PART 1) - PN Continued HHCS 1/2 NC X 2 GR.5 PL NUT,HEX TOPLOCK 3/4 NC GR.C PL BOLT 3/8 NC GR8 X 1-1/ LOCKNUT TLM 1/2 NC PLC HHCS 1/2 NF 1-1/2 PL HEXB 3/4-10UNC 2 PL RUBBER FLAP 6 X 48-1/ CLAMP BAR WLDMT, SKID SHOE ROLLER BEARING AND FLANGE CUTTERSHAFT ASSY-H/D GRASS M 1 ROTOR W/KNIVES (FLAIL AXE) A 1 FLANGE BEARING ASY 2 BORE KEY 1/2 X 1/2 X 1 7/8LG LOCKNUT TLM 5/16 NC PLB CARB 5/8-11UNC 3LG PL PULLEY, 3G5V-8.50 DIA BUSHING,QD-HUB SF 1-15/16 DIA WELDMENT,FLAIL AXE HEAD WLDMT HITCH POST PLATE,HITCH POST CLAMP PLATE,COVER,BELT & PULLEY ROD,HINGE,F/A DOOR WELDMENT,DOOR, FLAIL AXE V-BELT WELDMENT,ROLLER SHSS 3/8-NF X 1-1/2 PL WELDMENT,SKID SHOE 2018 Alamo Group Inc. Parts Section -15

21 48 IN FLAIL AXE HEAD ASY (PART 2) - PN WASHER,2OD,7/16 ID X 3/ WLDMT MOTOR MOUNT W/O STUDS PLATE,INSIDE PLATE A 1 HYD CYL 1-1/2BORE X 3-3/ HUB QD-SF 1-1/8DIA.BORE MOTOR,PISTON-2.48 CU.IN./REV STEP KEY 1/4 X 5/ PIN, 1-1/2 X 9 CHROME WELDMENT, PIN /2LG FLATWASHER 1-3/8 TYPE B NARROW PIN, COTTER 5/16 X 2-1/2 PL 2018 Alamo Group Inc. Parts Section -16

22 48 IN FLAIL AXE HEAD ASY (PART 2) - PN Continued NUT SLOT 1-3/8 12NF PLB HHCS 3/8 NC 2-3/4 PL GUARD,BEARING HHCS 5/8 NC 1-3/4 PL HEXB 3/4 NC 4 PL HHCS 1/2NC X 3-1/4 PL NUT,TOPLOCK 5/8 NC PLC HHCS 5/8-11 X 1-1/2 PL ADP HYD ELBOW 4MB-4MJ ADP HYD ELBOW 16MB -16MJ HOSE #8-8JFX - 8FJX - 60LG ADP HYD STGHT 8MB - 8MJ HOSE #16-16FJX-16FJX-60LG ADP HYD STGHT 16FJ-8MJ HOSE VINYL TAPE RED 1/2 WIDE VINYL TAPE, BLUE, 1/2 WIDE VINYL TAPE ORANGE 1/2" WIDE HOSE #4-4FJX - 4FJX -107LG HOSE #4-4FJX - 4FJX -107LG PAINT,TEXAS YELLOW FLATWASHER 5/8 PL STD WASHER,LOCK 5/8 GR8 - YDP WASHER, CUTTERSHAFT 2018 Alamo Group Inc. Parts Section -17

23 50 IN ROTARY BLADE PAN ASY - PN Alamo Group Inc. Parts Section -18

24 50 IN ROTARY BLADE PAN ASY - PN Continued PAN ASSEMBLY 50 A-BOOM PAN SUB-ASY BUSHING,KEYED BLADE BOLT KEY,5/16 SQ X 15/16 LONG BLADES-SET OF 3(50B/A HEAD) WASHER, 2-19/32 ID 5.0 OD 3/ KEYED BLADE BOLT FOR WASHER OD DX NUT SLOT HVY 1-1/8 NF PL PIN ROLL 3/16X1-3/ Alamo Group Inc. Parts Section -19

25 50 IN BOOM AXE HEAD ASSEMBLY PN ASY, 50" B/A ROT PISTON X-FRAME SQ. HD. WLDMT. 50" WLDMT DOOR - BA WLDMT, HITCHPOST, MACHETE A 1 HYD CYLINDER 2BORE X 9-1/4 STROKE FLAP, FRONT DEFLECTOR REAR FLAP MODIFIED FLAP, 13 X FLAP, 13X8-TAPER END SIDE GUARD REAR FLAP RETAINER PLATE, INSPECTION COVER ADP, HYD, ELBOW, 4MB-4MJ HHCS 3/8 NC 1-1/4 PL FLATWASHER 3/8 STD 2018 Alamo Group Inc. Parts Section -20

26 50 IN BOOM AXE HEAD ASSEMBLY PN Continued LOCKNUT TLM 3/8 NC PLC WASHER, 3/ HHCS 3/8 NC 1-3/4 PL5 24 5F NUT, 5/16 NC WING PIN, COTTER 3/16 X 1-1/2 PL PIN - MACHINED HEAD PIN-DRILLED NUT 3/4 NC LOCKNUT BOLT, HHCS 3/8 NC 1 PL HHCS 3/4 NC 1-3/4 PL HHCS 3/8 NC 2-3/4 PL NUT, SLOTTED 1-3/8 12NF PLB FLATWASHER, 1-3/8 TYPE B PL NARROW PIN WLDMNT, 11-1/ PIN - 1/2 X 9 CHROME PIN, COTTER 5/16 X 2-1/2 PL VINYL TAPE YELLOW 1/ VINYL TAPE YELLOW 1/ VINYL TAPE ORANGE 1/2" 2018 Alamo Group Inc. Parts Section -21

27 50 IN BOOM AXE HEAD SUB ASSEMBLY PN ASY, 50" B/A ROT PISTON X-FRAME SQ. HD. WLDMT. 50" WELDMENT, HITCHPOST ADAPTER ASY, MOTOR/SPINDLE PAN ASSY SPACER BLADE PAN R.H. SKID SHOE L. H. SKID SHOE FLATWASHER 3/8 STD 2018 Alamo Group Inc. Parts Section -22

28 50 IN BOOM AXE HEAD SUB ASSEMBLY PN Continued LOCKNUT TLM 3/8 NC PLC FSCS 3/8 NC X 1-1/ LOCKWASHER 3/4 HEAVY NUT 3/4 NC LOCKNUT SHCS 3/4 NC HHCS 3/4 NC 3-1/4 PL HHCS 3/4 NC 2-1/4 PL SERIAL NUMBER PLATE ADEP HYD STGHT 10MB-16MJ VINYL TAPE BLUE 1/2" PLASTIC TIE, BLUE 11 LG VINYL TAPE, RED, 1/2" 2018 Alamo Group Inc. Parts Section -23

29 50 IN MOTOR & SPINDLE ASY 2018 Alamo Group Inc. Parts Section -24

30 50 IN MOTOR & SPINDLE ASY Continued ASY, MOTOR/SPINDLE MOTOR PISTON 4.91 CID B 1 ASSY,SPINDLE HOUSING-SPLINED ADP HYD STGHT 16FLH-16MJ SPCL ADP HYD STGHT 16FLH-16MJ SPCL O-RING.139 DIA X INSIDE ADP HYD STGHT 10MB - 16MJ HHCS 7/16-14NC 4-1/2 PL HIGH ALLOY, L/W 7/16 YZ HHCS 1/2 NC 1-3/4 PL LOCKWASHER, 1/2, HVY, PL 2018 Alamo Group Inc. Parts Section -25

31 50 IN MOTOR ASY - PARTS (PART 1) - PN Alamo Group Inc. Parts Section -26

32 50 IN MOTOR ASY - PARTS (PART 1) - PN Continued MOTOR ASY, PISTON TYPE BARREL HOUSING ASY VALVE PLATE (IN ITEM 39) NOZZLE PLUG ASY, HEXAGON BEARING HOUSING O-RING (IN ITEM 39 & 40) O-RING (IN ITEM 39 & 40) SEAL CARRIER SHAFT SEAL (IN ITEM 39 & 40) SPACER WASHER SEAL, SHAFT RETAINING RING RETAINING RING SHAFT ASY KIT,REPL, BARREL/RING, 4.91 CI BARREL SUPPORT PISTON ASY (IN ITEM 39) KIT, 21 PISTON RINGS BEARING ASY, CUP & CONE BEARING ASY, CUP & CONE SPACER WASHER RETAINING RING SHIM,.020" (0.5) SHIM,.007" (0.2) SHIM,.015" (0.4) SHIM,.023" (0.6) SHIM,.030" (0.8) SHIM,.039" (1.0) SHIM,.027" (0.7) BOLT, SOCKET HEAD LOCKWASHER M13 X GUIDE PIN RELIEF MANIFOLD SEAL KIT, F/ RELIEF VALVE RELIEF VALVE, 4061 PSI (280 BAR) RELIEF VALVE, 4786 PSI (330 BAR) O-RING BALL 2018 Alamo Group Inc. Parts Section -27

33 50 IN MOTOR ASY - PARTS (PART 2) - PN Alamo Group Inc. Parts Section -28

34 50 IN MOTOR ASY - PARTS (PART 2) - PN Continued HEXAGON PLUG O-RING PLUG ASY PLUG ASY PLUG ASY REBUILD KIT (ITEMS 2,7,8,10,15 & 17) SEAL KIT (ITEMS 7,8 &10) 2018 Alamo Group Inc. Parts Section -29

35 50 IN SPINDLE ASY - PN B B - ASSY,SPINDLE HOUSING-SPLINED MACH, CAST, SPINDLE, HOUSING SPINDLE -SPLINED BEARING RING SEAL SNAP RING SPINDLE CUP & CONE ASY BEARING,ROLLER-50 X 90 X LOCKNUT-SPINDLE BEARING 2018 Alamo Group Inc. Parts Section -30

36 50 IN SPINDLE ASY - PN B Continued GREASE RELIEF FITTING 1-5LBS FITTING,GREASE 1/8 MP STRAIGHT COVER 2018 Alamo Group Inc. Parts Section -31

37 60 IN BLADE BAR ASY - PN BLADE BAR ASY NUT ROLL PIN 3 15C WASHER, X 2.50 X.165, HARDENED BLADE SET, MATCHED SET OF BLADE BAR LEAF, TOP LEAF BLADE BAR LEAF, MIDDLE LEAF BLADE BAR LEAF, BOTTOM LEAF BOLT, LONG BOLT BOLT, SHORT BOLT BLADE BOLT LOCKWASHER LOCKWASHER, 3/4" PL HEAVY BOLT, SOCKET HEAD 3/4"-NC X 4" PL GR BLADE BOLTS, NUTS, ROLLPIN KIT (INCLUDES 2 EACH OF ITEMS 1, 2, & 10) 2018 Alamo Group Inc. Parts Section -32

38 60 IN DOOR CYL ASY - PN A A - DOOR CYLINDER ASY 1 5JRC LOCKNUT PISTON ROD WLD`MT TUBE / BARRELL WLD`MT CYLINDER HEAD 6 * SEAL KIT 1 ROD WIPER SEAL (IN ITEM 12) 7 * SEAL KIT 1 ROD SEAL (IN ITEM 12) 8 * SEAL KIT 1 O-RING (IN ITEM 12) 9 * SEAL KIT 1 SEAL (IN ITEM 12) 10 * SEAL KIT 1 PISTON SEAL (IN ITEM 12) O-RING F/ O-RING BOSS FITTING SEAL KIT (ITEMS 6 THRU 10) 2018 Alamo Group Inc. Parts Section -33

39 THIS PAGE INTENTIONALLY LEFT BLANK 2018 Alamo Group Inc. Parts Section -34

40 60 IN HEAD ASY - SN & DOWN 2018 Alamo Group Inc. Parts Section -35

41 60 IN HEAD ASY - SN & DOWN Continued ROTARY HEAD ASY, 60" W/ BAR CARRIER (NON-SALABLE) FLATWASHER LOCKNUT BOLT COTTER PIN BOLT 8 NFS 1 SERIAL NUMBER PLATE SLOTTED NUT BOLT FLAP HOLD DOWN BAR SHIELD, DEBRIS DEFLECTOR HEX WRENCH, SPECIAL PIN REAR FLAP REAR CLAMP BAR PIN ADAPTER, ELBOW CYLINDER ASY PIN WLD`MT PIN DOOR ROD, HINGE VINYL TAPE YELLOW 1/2" WIDE VINYL TAPE YELLOW 1/2" WIDE ROTARY HEAD SUB-ASY, 60" (NON-SALABLE) DECALS, (SEE SAFETY SECTION) HOSE, (LARGE) - W/ RED TIE - PRESSURE HOSE HOSE, (LARGE) - W/ ORANGE TIE - RETURN HOSE HOSE, (LARGE) - W/ BLUE TIE - CASE DRAIN HOSE, (SMALL) - W/ YELLOW / WHITE - DOOR CYL HOSE, (SMALL) - W/ YELLOW TIE - DOOR CYL VINYL TAPE RED 1/2" WIDE VINYL TAPE GREEN 1/2" WIDE VINYL TAPE BLUE 1/2" WIDE WASHER S 1 ROLL PIN COTTER PIN 2018 Alamo Group Inc. Parts Section -36

42 60 IN HEAD ASY - SN & UP ROTARY HEAD ASY, 60" W/BAR CARRIER (NON-SALABLE) FLATWASHER LOCKNUT 2018 Alamo Group Inc. Parts Section -37

43 60 IN HEAD ASY - SN & UP Continued BOLT COTTER PIN BOLT PLATE, ALAMO S/N NUT BOLT FLAP HOLD DOWN BAR SHIELD, DEBRIS DEFLECTOR HEX WRENCH, MODIFIED PIN, 2-1/2" LONG REAR FLAP, 10" HIGH X 63" LONG REAR CLAMP BAR PIN, 2" LONG ADAPTER, ELBOW CYLINDER ASY, DOOR PIN WLD`MT, 11-1/2" LONG PIN, 9" LONG DOOR WLD`MT ROD, HINGE VINYL TAPE BLUE 1/2" WIDE VINYL TAPE YELLOW 1/4" WIDE " SQ. HD SUB-ASY DECAL KIT HOSE, 16 W/ RED TAPE HOSE, 16 W/ ORANGE TAPE HOSE, 16 W/ BLUE TAPE HOSE, 4 W/ YELLOW HOSE, 4 W/ YELLOW TAPE VINYL TAPE YELLOW 1/4" WIDE VINYL TAPE BLUE 1/ VINYL TAPE ORANGE 1/ WASHER, NARROW S 2 ROLL PIN BOLT COTTER PIN 2018 Alamo Group Inc. Parts Section -38

44 60 IN HEAD SUB-ASY - SN & DOWN 2018 Alamo Group Inc. Parts Section -39

45 60 IN HEAD SUB-ASY - SN & DOWN Continued ROTARY HEAD SUB-ASY, 60" (NON-SALABLE) LOCKWASHER LOCKNUT LOCKNUT BOLT NUT BOLT BLADE BAR ASY BOLT SKID SHOE DECK HEAD HITCH POST BOLT, SOCKET HEAD FLATWASHER, HARDENED SPECIAL 15 15B WASHER 16 W67 16 WASHER LOCKWASHER HYDRAULIC FITTING, ELBOW SPLIT FLANGE KIT HYDRAULIC FITTING, ELBOW ADAPTER, HYD, STRAIGHT B 1 MOTOR ASY A 1 SPINDLE HOUSING MOTOR PLATE TIE ROD NUT SEAL KIT, VALVE BLOCK TO MOTOR CARTRIDGE, RELIEF (4000 PSI) 32A O-RING 32B O-RING 32C O-RING 32D BACK-UP RING GASKET, END COVER MOTOR SEAL KIT 2018 Alamo Group Inc. Parts Section -40

46 60 IN HEAD SUB-ASY - SN & UP 2018 Alamo Group Inc. Parts Section -41

47 60 IN HEAD SUB-ASY - SN & UP Continued ROTARY HEAD ASY. W/ BAR CARRIER (NON SALABLE) LOCKWASHER LOCKNUT LOCKNUT BOLT O-RING BOLT BLADE BAR ASY BOLT SKID SHOE DECK HEAD WLD`MT HITCH POST WLD`MT BOLT WASHER, HARDENED 15 15B WASHER BOLT LOCKWASHER ADP HYD STGHT 16FLH-16MJ SPCL ADP HYD STGHT 16FLH-16MJ SPCL BOLT ADAPTER, HYD MOTOR ASY, PISTON TYPE A 1 SPINDLE HOUSING, SPLINED LOCKWASHER 2018 Alamo Group Inc. Parts Section -42

48 60 IN MOTOR ASY - PARTS - SN (PART 1) - PN Alamo Group Inc. Parts Section -43

49 60 IN MOTOR ASY - PARTS - SN (PART 1) - PN Continued MOTOR ASY, PISTON TYPE BARREL HOUSING ASY VALVE PLATE (IN ITEM 39) NOZZLE PLUG 2.5MM PLUG ASY, HEXAGON BEARING HOUSING O-RING (IN ITEM 39) WHILE QTYS LAST O-RING (IN ITEM 39) WHILE QTYS LAST SEAL CARRIER SHAFT SEAL (IN ITEM 39 & 40) SPACER WASHER SEAL, SHAFT RETAINING RING - WHILE QTYS LAST RETAINING RING - WHILE QTYS LAST SHAFT ASY KIT,REPL, BARREL/RING, 4.91 CI BARREL SUPPORT PISTON ASY (IN ITEM 39) KIT, 21 PISTON RINGS BEARING ASY, CUP & CONE BEARING ASY, CUP & CONE SPACER WASHER RETAINING RING SHIM,.020" (0.5) SHIM,.007" (0.2) SHIM,.015" (0.4) SHIM,.023" (0.6) SHIM,.030" (0.8) SHIM,.039" (1.0) SHIM,.027" (0.7) BOLT, SOCKET HEAD SAFETY VALVE GUIDE PIN RELIEF MANIFOLD SEAL KIT, F/ RELIEF VALVE RELIEF VALVE, 4061 PSI (280 BAR) RELIEF VALVE, 4786 PSI (330 BAR) O-RING BALL 2018 Alamo Group Inc. Parts Section -44

50 60 IN MOTOR ASY - PARTS - SN (PART 2) - PN Alamo Group Inc. Parts Section -45

51 60 IN MOTOR ASY - PARTS - SN (PART 2) - PN Continued PLUG, HEXAGON O-RING PLUG ASY PLUG ASY PLUG ASY REBUILD KIT (ITEMS 2,7,8,10,15 & 17) SEAL KIT (ITEMS 7,8 &10) KIT, SEAL, MOTOR, 4.91 CID 2018 Alamo Group Inc. Parts Section -46

52 60 IN SPINDLE ASY - PN A SPINDLE ASY, F/ 60" ROTARY HEAD SPINDLE SHAFT SPINDLE HOUSING LOWER BEARING ASY, CUP & CONE UPPER BEARING ASY, CUP & CONE NUT 2018 Alamo Group Inc. Parts Section -47

53 60 IN SPINDLE ASY - PN A Continued TANG WASHER SEAL RELIEF PLUG GREASE FITTING 2018 Alamo Group Inc. Parts Section -48

54 BOOM ASY - 17 FT (STD STEEL) - PN ASY, BOOM 17 MACHETE WELDMENT, LIFT SECTION WLDMNT, DIPPER SECT ASY, DIPPER CYLINDER TUBE, HYDRAULIC 17 MACHETE TUBE, HYD 17 MACHETE TUBE, HYD 17 MACHETE 2018 Alamo Group Inc. Parts Section -49

55 BOOM ASY - 17 FT (STD STEEL) - PN Continued BSHG TF 1-3/4OD X 1-1/2ID X ASSY,TILT CYLINDER W 1 WELDED, LINK ARM LINKAGE ARM ASSEMBLY ADP HYD STGHT 4MJ-4MJ BLKHD CAP-NUT #4FJ WELDMENT, PIN - 12LG PIN, 1-1/2 X 9-9/16 CHROME PIN, 1-1/2 X 8-5/16 CHROME PIN, 1-1/2 X 6-11/16 CHROME PIN, 1-1/2 X 7-9/16 CHROME PIN, 1-1/2 X 5-3/16 CHROME WELDMENT, PIN /16LG COVER, HYD TUBE TUBE CLAMP 4 HALVES & TOP PLT CYL ROD GUARD ASSEMBLY TUBE, HYD 17 MACHETE CLAMP TUBE, HYD 17 MACHETE TUBE, HYD 17 MACHETE HHCS 3/8 NC 2-3/4 PL NUT SLOT 1-3/8 12NF PLB FLATWASHER 1-3/8 TYPE B NARROW PIN, COTTER 5/16 X 2-1/2 PL LOCKNUT TLM 3/8-NC PLC ADP HYD ELBOW 16MJ -16FJX FLATWASHER 1/2 PL STD HHCS 1/2NC X 3 PL VINYL TAPE BLUE 1/ VINYL TAPE RED 1/2" WIDE VINYL TAPE ORANGE 1/ HHCS 5/16-18UNC 4-1/4 PL LOCKNUT TLM 5/16 NC PLB 2018 Alamo Group Inc. Parts Section -50

56 BOOM ASY - 17 FT (OPT ALLOY STEEL) - PN ASY, ALLOY BOOM 17 MACHETE SECTION, LIFT 17 BOOM T WLDMNT, ALLOY DIPPER SECTION ASY, DIPPER CYLINDER TUBE, HYDRAULIC 17 MACHETE TUBE, HYD 17 MACHETE TUBE, HYD 17 MACHETE 2018 Alamo Group Inc. Parts Section -51

57 BOOM ASY - 17 FT (OPT ALLOY STEEL) - PN Continued BSHG TF 1-3/4OD X 1-1/2ID X ASSY,TILT CYLINDER W 1 WELDED, LINK ARM LINKAGE ARM ASSEMBLY ADP HYD STGHT 4MJ-4MJ BLKHD CAP-NUT #4FJ WELDMENT, PIN - 12LG PIN, 1-1/2 X 9-9/16 CHROME PIN, 1-1/2 X 8-5/16 CHROME PIN, 1-1/2 X 6-11/16 CHROME PIN, 1-1/2 X 7-9/16 CHROME PIN, 1-1/2 X 5-3/16 CHROME WELDMENT, PIN /16LG COVER, HYD TUBE TUBE CLAMP 4 HALVES & TOP PLT CYL ROD GUARD ASSEMBLY CLAMP TUBE, HYD 17 MACHETE HHCS 3/8 NC 2-3/4 PL NUT SLOT 1-3/8 12NF PLB FLATWASHER 1-3/8 TYPE B NARROW PIN, COTTER 5/16 X 2-1/2 PL LOCKNUT TLM 3/8-NC PLC ADP HYD ELBOW 16MJ -16FJX FLATWASHER 1/2 PL STD HHCS 1/2NC X 3 PL VINYL TAPE BLUE 1/ VINYL TAPE RED 1/2" WIDE VINYL TAPE ORANGE 1/ TUBE, HYD 17 MACHETE TUBE, HYD 17 MACHETE HHCS 5/16-18UNC 4-1/4 PL LOCKNUT TLM 5/16 NC PLB 2018 Alamo Group Inc. Parts Section -52

58 BOOM ASY - 21 FT (STD STEEL) PN MACHETE, 21 FT BOOM ASY FLATWASHER 1/2 PL STD PIN, COTTER 5/16 X 2-1/2 PL HHCS 1/2NC X 3 PL HHCS 3/8 NC 2-3/4 PL NUT SLOT 1-3/8 12NF PLB HHCS 5/16NC 3-1/4 PL WELDMENT,21 DIPPER SECTION 2018 Alamo Group Inc. Parts Section -53

59 BOOM ASY - 21 FT (STD STEEL) PN Continued W 1 WELDED, LINK ARM PIN, 1-1/2 X 5-3/16 CHROME PIN, 1-1/2 X 8-5/16 CHROME PIN, 1-1/2 X 7-9/16 CHROME PIN, 1-1/2 X 6-11/16 CHROME WELDMENT, PIN /16LG WELDMENT, PIN - 12LG PIN, 1-1/2 X 9-9/16 CHROME TUBING,HYDRAULIC-DIPPER SECT TUBING,HYDRAULIC-DIPPER SECT TUBING,HYD W/NUT-DIPPER SEC TUBING,HYDRAULIC-LIFT SECTION TUBING,HYDRAULIC-LIFT SECTION TUBING,HYDRAULIC-LIFT SECTION PLATE,COVER 26-1/2 LG WELDMENT-LIFT SECTION 21FT ASSY,DIPPER CYLINDER BSHG TF 1-3/4OD X 1-1/2ID X LINKAGE ARM ASSEMBLY ASSY,TILT CYLINDER CLAMP TUBE CLAMP 4 HALVES & TOP PLT FLATWASHER 1-3/8 TYPE B NARROW CYL ROD GUARD ASSEMBLY ADP HYD STGHT 4MJ-4MJ BLKHD ADP HYD ELBOW 16MJ -16FJX CAP-NUT #4FJ LOCKNUT TLM 3/8-NC PLC VINYL TAPE RED 1/2" WIDE VINYL TAPE ORANGE 1/ VINYL TAPE BLUE 1/2" WIDE HHCS 3/8 NC 3 PL Alamo Group Inc. Parts Section -54

60 BOOM ASY - 21 FT (OPT ALLOY STEEL) PN MACHETE, 21 ALLOY BOOM ASY FLATWASHER 1/2 PL STD PIN, COTTER 5/16 X 2-1/2 PL HHCS 1/2NC X 3 PL HHCS 3/8 NC 2-3/4 PL NUT SLOT 1-3/8 12NF PLB HHCS 5/16NC 3-1/4 PL WELDMENT,21DIPPER SECTION W 1 WELDED, LINK ARM 2018 Alamo Group Inc. Parts Section -55

61 BOOM ASY - 21 FT (OPT ALLOY STEEL) PN Continued PIN, 1-1/2 X 5-3/16 CHROME PIN, 1-1/2 X 8-5/16 CHROME PIN, 1-1/2 X 7-9/16 CHROME PIN, 1-1/2 X 6-11/16 CHROME WELDMENT, PIN /16LG WELDMENT, PIN - 12LG PIN, 1-1/2 X 9-9/16 CHROME TUBING,HYDRAULIC-DIPPER SECT TUBING,HYDRAULIC-DIPPER SECT TUBING,HYD W/NUT-DIPPER SEC TUBING,HYDRAULIC-LIFT SECTION TUBING,HYDRAULIC-LIFT SECTION TUBING,HYDRAULIC-LIFT SECTION PLATE,COVER 26-1/2 LG WELDMENT,21LIFT SECTION ASSY,DIPPER CYLINDER BSHG TF 1-3/4OD X 1-1/2ID X LINKAGE ARM ASSEMBLY ASSY,TILT CYLINDER CLAMP TUBE CLAMP 4 HALVES & TOP PLT FLATWASHER 1-3/8 TYPE B NARROW CYL ROD GUARD ASSEMBLY ADP HYD STGHT 4MJ-4MJ BLKHD ADP HYD ELBOW 16MJ -16FJX CAP-NUT #4FJ LOCKNUT TLM 3/8-NC PLC VINYL TAPE RED 1/2" WIDE VINYL TAPE ORANGE 1/ VINYL TAPE BLUE 1/2" WIDE HHCS 3/8 NC 3 PL Alamo Group Inc. Parts Section -56

62 BOOM ASY - 24 FT (STD STEEL) - PN MACHETE, 24 BOOM ASY STD STEEL FLATWASHER 1/2 PL STD PIN, COTTER 5/16 X 2-1/2 PL HHCS 1/2NC X 3 PL HHCS 3/8 NC 2-3/4 PL NUT SLOT 1-3/8 12NF PLB HHCS 5/16NC 3-1/4 PL WELDMENT,24DIPPER SECTION W 1 WELDED, LINK ARM 2018 Alamo Group Inc. Parts Section -57

63 BOOM ASY - 24 FT (STD STEEL) - PN Continued PIN, 1-1/2 X 5-3/16 CHROME PIN, 1-1/2 X 8-5/16 CHROME PIN, 1-1/2 X 7-9/16 CHROME PIN, 1-1/2 X 6-11/16 CHROME WELDMENT, PIN /16LG WELDMENT, PIN - 12LG PIN, 1-1/2 X 9-9/16 CHROME TUBING,HYDRAULIC-DIPPER SECT TUBING,HYDRAULIC-DIPPER SECT TUBING,HYDRAULIC-DIPPER SECT TUBING,HYDRAULIC-LIFT SECTION TUBING, HYDRAULIC-LIFT SECTION TUBING,HYDRAULIC-LIFT SECTION PLATE,COVER 36 LG WELDMENT-LIFT SECTION 24FT ASSY,DIPPER CYLINDER BSHG TF 1-3/4OD X 1-1/2ID X LINKAGE ARM ASSEMBLY ASSY,TILT CYLINDER CLAMP TUBE CLAMP 4 HALVES & TOP PLT FLATWASHER 1-3/8 TYPE B NARROW CYL ROD GUARD ASSEMBLY ADP HYD STGHT 4MJ-4MJ BLKHD ADP HYD ELBOW 16MJ -16FJX CAP-NUT #4FJ LOCKNUT TLM 3/8-NC PLC VINYL TAPE RED 1/2" WIDE VINYL TAPE ORANGE 1/ VINYL TAPE BLUE 1/2" WIDE PLATE,COVER 42 LG HHCS 3/8 NC 3 PL Alamo Group Inc. Parts Section -58

64 BOOM ASY - 24 FT (OPT ALLOY STEEL) (PART1) - PN MACHETE, 24 OPT ALLOY STEEL BOOM ASY FLATWASHER 1/2 PL STD PIN, COTTER 5/16 X 2-1/2 PL HHCS 1/2NC X 3 PL HHCS 3/8 NC 2-3/4 PL NUT SLOT 1-3/8 12NF PLB HHCS 5/16NC 3-1/4 PL WELDMENT,24DIPPER SECTION W 1 WELDED, LINK ARM 2018 Alamo Group Inc. Parts Section -59

65 BOOM ASY - 24 FT (OPT ALLOY STEEL) (PART1) - PN Continued PIN, 1-1/2 X 5-3/16 CHROME PIN, 1-1/2 X 8-5/16 CHROME PIN, 1-1/2 X 7-9/16 CHROME PIN, 1-1/2 X 6-11/16 CHROME WELDMENT, PIN /16LG WELDMENT, PIN - 12LG PIN, 1-1/2 X 9-9/16 CHROME TUBING,HYDRAULIC-DIPPER SECT TUBING,HYDRAULIC-DIPPER SECT TUBING,HYDRAULIC-DIPPER SECT TUBING,HYDRAULIC-LIFT SECTION TUBING, HYDRAULIC-LIFT SECTION TUBING,HYDRAULIC-LIFT SECTION PLATE,COVER 36 LG WELDMENT,24LIFT SECTION ASSY,DIPPER CYLINDER BSHG TF 1-3/4OD X 1-1/2ID X LINKAGE ARM ASSEMBLY BSHG TF 1-3/4OD X 1-1/2ID X ASSY,TILT CYLINDER CLAMP TUBE CLAMP 4 HALVES & TOP PLT FLATWASHER 1-3/8 TYPE B NARROW CYL ROD GUARD ASSEMBLY ADP HYD STGHT 4MJ-4MJ BLKHD ADP HYD ELBOW 16MJ -16FJX CAP-NUT #4FJ LOCKNUT TLM 3/8-NC PLC VINYL TAPE RED 1/2" WIDE VINYL TAPE ORANGE 1/ VINYL TAPE BLUE 1/2" WIDE PLATE,COVER 42 LG 2018 Alamo Group Inc. Parts Section -60

66 BOOM ASY - 24 FT (OPT ALLOY STEEL) (PART 2) - PN HHCS 3/8 NC 3 PL Alamo Group Inc. Parts Section -61

67 BOOM HOSE SCHEMATIC - 17 FT BOOM ARM 2018 Alamo Group Inc. Parts Section -62

68 BOOM HOSE SCHEMATIC - 17 FT BOOM ARM Continued BOOM ARM ASY, F/ STD STEEL BOOM BOOM ARM ASY, F/ ALLOY STEEL BOOM PLASTIC TIE HOSE, 134" (SMALL) W/ YELLOW / WHITE TIE HOSE, 134" (SMALL) W/ YELLOW TIE HOSE SLEEVING, 48" LG HOSE, 60" (SMALL) W/ YELLOW / WHITE TIE HOSE, 60" (SMALL) W/ YELLOW TIE HOSE SLEEVING, 54" LG HOSE, (LARGE) - W/ RED TIE HOSE, (LARGE) - W/ BLUE TIE HOSE, (LARGE) - W/ ORANGE TIE HOSE, (MEDIUM) - W/ BLUE TIE HOSE, (MEDIUM) - W/ BLUE / WHITE TIE HOSE, (MEDIUM) - W/ RED TIE HOSE, (MEDIUM) - W/ RED / WHITE TIE RUBBER GROMMET HOSE SLEEVING, 36" LG CAP NUT, F/ SHIPPING ONLY HOSE SLEEVING, 2-1/2" ID X 36" LG 2018 Alamo Group Inc. Parts Section -63

69 BOOM HOSE SCHEMATIC - 21 FT BOOM ARM 2018 Alamo Group Inc. Parts Section -64

70 BOOM HOSE SCHEMATIC - 21 FT BOOM ARM Continued BOOM ARM ASY, STD STEEL (OPTIONAL) BOOM ARM ASY, ALLOY STEEL (OPTIONAL) PLASTIC TIE HOSE, 184" (SMALL) - W/ YELLOW / WHITE TIE HOSE, 184" (SMALL) - W/ YELLOW TIE HOSE SLEEVING, 48" LG HOSE, 60" (SMALL) - W/ YELLOW / WHITE TIE HOSE, 60" (SMALL) - W/ YELLOW TIE HOSE SLEEVING, 54" LG HOSE, (LARGE) - W/ RED TIE HOSE, (LARGE) - W/ ORANGE TIE HOSE, (LARGE) - W/ ORANGE TIE HOSE, (MEDIUM) - W/ BLUE TIE HOSE, (MEDIUM) - W/ BLUE / WHITE TIE HOSE, (MEDIUM) - W/ RED TIE HOSE, (MEDIUM) - W/ RED / WHITE TIE RUBBER GROMMET HOSE SLEEVING CAP NUT, F/ SHIPPING ONLY PAINT, TEXAS YELLOW DECAL KIT, MACHETE BOOM 21` COVER HHCS 3/8 NC 3 PLB 2018 Alamo Group Inc. Parts Section -65

71 BOOM HOSE SCHEMATIC - 24 FT BOOM ARM 2018 Alamo Group Inc. Parts Section -66

72 BOOM HOSE SCHEMATIC - 24 FT BOOM ARM Continued BOOM ARM ASY, STD STEEL (OPTIONAL) BOOM ARM ASY, ALLOY STEEL (OPTIONAL) PLASTIC TIE HOSE, 184" (SMALL) - W/ YELLOW / WHITE TIE HOSE, 184" (SMALL) - W/ YELLOW TIE HOSE SLEEVING, 48" LG HOSE, 120" (SMALL) - W/ YELLOW / WHITE TIE HOSE, 120" (SMALL) - W/ YELLOW TIE HOSE SLEEVING, 54" LG HOSE, (LARGE) - W/ RED TIE HOSE, (LARGE) - W/ ORANGE TIE HOSE, (LARGE) - W/ ORANGE TIE HOSE, (MEDIUM) - W/ BLUE TIE HOSE, (MEDIUM) - W/ BLUE / WHITE TIE HOSE, (MEDIUM) - W/ RED TIE HOSE, (MEDIUM) - W/ RED / WHITE TIE RUBBER GROMMET HOSE SLEEVING CAP NUT, F/ SHIPPING ONLY PAINT, TEXAS YELLOW DECAL KIT, MACHETE BOOM 24` PLASTIC COVER HHCS 3/8 NC 3 PL Alamo Group Inc. Parts Section -67

73 BUZZBAR ASY - 48 IN (PART 1) - PN Alamo Group Inc. Parts Section -68

74 BUZZBAR ASY - 48 IN (PART 1) - PN Continued SAW HEAD ASY, 48 INCH 2 BLADE END CAP BLADE SPACER SPINDLE ASY BOLT, SOCKET HEAD CNTR-SNK 1/2"-NC X 3-1/2" BOLT, SOCKET HEAD CNTR-SNK 1/2"-NC X 2" SLOTTED NUT, 1/2"-NC PLB HEX NUT, 1/2"-NC PL SAW BODY WLD`MT, 2 BLADE BRACKET TENSION ADJUSTMENT LUG NUT, 1/2"-20NF 90DEG BOLT, HEX HEAD 1/2"-NC X 3-1/2" PL GR V-BELT SHEAVE, W/GROOVE BUSHING QD BELT COVER, LEFT STUD, QUICK RELEASE W/RING RETAINER F/ QUICK RELEASE RECEIVER F/ QUICK RELEASE BOLT, HEX HEAD 3/8"-NC X 1" PL GR FLATWASHER, 3/8" PL STD LOCKNUT TLM 1/2 NC PLC DRIVE SPINDLE ASY MOTOR, PISTON-2.48 CU.IN./REV BOLT, HEX HEAD 1/2"-13NC X 1-3/4" PL GR HUB, 1-1/8" BORE & 1/4" KEY INSERT, URETHANE COVER, PROTECTIVE NYLON HUB, 1-1/8" BORE & 5/16" KEY SHEET, BELT COVER SHORT HITCH POST WLD`MT LOCKNUT, 3/4"-NC PLC HITCH POST CLAMP PLATE BOLT, HEX HEAD 3/4"-10NC X 2" PL GR MOUNT TUBE WLD`MT, 2 BLADE LOCKNUT, 3/8"-NC PLB BOLT, HEX HEAD 3/8"-16NC X 1-1/2" PL GR BUMPER REAR SHIELD WLD`MT SAW BLADE PACKAGE OF VINYL TAPE RED 1/2" WIDE 2018 Alamo Group Inc. Parts Section -69

75 BUZZBAR ASY - 48 IN (PART 2) - PN Alamo Group Inc. Parts Section -70

76 BUZZBAR ASY - 48 IN (PART 2) - PN Continued ADAPTER, HYD STRAIGHT VINYL TAPE ORANGE 1/ ADAPTER, HYD, TEE HOSE, # 16-16FJX - 16FJX45-74" LG (RED TIE) HOSE, 16-16FJX - 16FJX45-74" LG (ORANGE TIE) ADAPTER, HYD REDUCER HOSE, # 8-8FJX - 8FJX - 80" LG (BLUE TIE) ADAPTER, HYD STRAIGHT 8MB - 8FJX ADAPTER, HYD ELBOW HOSE, # 8-8FJX - 8FJX - 17" LG DECAL, WARNING BELT SHIELD DECAL, USE/REPAIR GUARDS DECAL, BLADES THROWN OBJECTS DECAL, REPLACEMENT PARTS DECAL, TRACTOR OPERATOR SAFETY DECAL, PINCH POINTS DECAL, SHIELD MISSING DECAL, WARNING HOSE BURST DECAL, MULTI HAZ DECAL, ALAMO INDUSTRIAL LOGO DECAL, BUZZBAR 62 D138 1 DECAL, CW BLADE ROTATION DECAL, HEAR PROTECTION REQD DECAL, ROTATING BLADES DECAL, WARNING DISCONNECT DECAL, NO HITCH POST HERE NFS PLATE, SERIAL NUMBER BB NFS METAL TACK DECAL, ALAMO IND. GREEN & BLACK DECAL, RED REFLECTOR DECAL, YELLOW REFLECTOR ADAPTER, HYD STRAIGHT PIN WLD`MT, 11-1/2" LG FLATWASHER, 1-3/8" TYPE B NARROW SLOTTED NUT, 1-3/8"-12NF PLB COTTER PIN, 5/16" X 2-1/2" PL BOLT, HEX HEAD 3/8"-NC X 2-3/4" PL GR PIN, CHROME 1-1/2" X 9" KEY, 1/4" X 1/4" X 1-1/4" LG 2018 Alamo Group Inc. Parts Section -71

77 BUZZBAR ASY - 48 IN (PART 3) - PN Alamo Group Inc. Parts Section -72

78 BUZZBAR ASY - 48 IN (PART 3) - PN Continued INSERT SHEET, BUZZBAR MACHETE RELIEF MANIFOLD ASY, 2900 PSI CAP NUT, # 4FJ VINYL TAPE BLUE 1/ COTTER PIN, 1/8" X 1" WASHER, PLATED MOTOR MOUNT TUBE, MACHINED 2018 Alamo Group Inc. Parts Section -73

79 BUZZBAR ASY - 69 IN (PART 1) - PN Alamo Group Inc. Parts Section -74

80 BUZZBAR ASY - 69 IN (PART 1) - PN Continued SAW BLADE HEAD ASY, END CAP BLADE SPACER SPINDLE ASY BOLT, SOCKET CNTR-SNK 1/2"-NC X 3-1/2" W/HOLE BOLT, SOCKET CNTR-SNK 1/2"-NC X 2" W/HOLE SLOTTED NUT, 1/2"-NC PLB HEX NUT, 1/2"-NC PL SAW BODY WLD`MT, 3 BLADE TENSION ADJUSTMENT BRACKET LUG NUT, 1/2"-20NF 90DEG BOLT, HEX HEAD 1/2"-NC X 3-1/2" PL GR V-BELT SHEAVE W/GROOVE BUSHING, QD SHEET, BELT COVER, LEFT 3 BLADE STUD, QUICK RELEASE W/RING RETAINER F/QUICK RELEASE RECEIVER F/ QUICK RELEASE BOLT, HEX HEAD 3/8"-NC X 1 PL GR FLATWASHER, 3/8" PL STD LOCKNUT TLM 1/2 NC PLC DRIVE SPINDLE ASY MOTOR, PISTON-2.48 CU.IN./REV BOLT, HEX HEAD 1/2"-13NC X 1-3/4" PL GR HUB, 1-1/8" BORE X 1/4" KEY INSERT, URETHANE COVER, PROTECTIVE NYLON HUB, 1-1/8" BORE X 5/16" KEY BELT COVER, SHORT HITCH POST WLD`MT LOCKNUT, 3/4"-NC PLC PLATE, HITCH POST CLAMP BOLT, HEX HEAD 3/4"-10NC X 2" PL GR HITCH TUBE WLD`MT, 3 BLADE LOCKNUT, 3/8"-NC PLB BOLT, HEX HEAD 3/8"-16NC X 1-1/2" PL GR BUMPER SHIELD WLD`MT, REAR SAW BLADE PACKAGE OF VINYL TAPE RED 1/2" WIDE 2018 Alamo Group Inc. Parts Section -75

81 BUZZBAR ASY - 69 IN (PART 2) - PN Alamo Group Inc. Parts Section -76

82 BUZZBAR ASY - 69 IN (PART 2) - PN Continued ADAPTER, HYD STRAIGHT VINYL TAPE ORANGE 1/ ADAPTER, HYD TEE HOSE 16-16FJX -16FJX45-74LG (RED) HOSE 16-16FJX - 16FJX45-74 (ORANGE) ADAPTER, HYD REDUCER HOSE 8-8FJX - 8FJX - 80 (BLUE) ADAPTER, HYD STRAIGHT 8MB - 8FJX ADAPTER, HYD ELBOW HOSE, # 8-8FJX - 8FJX - 17" LG NFS SERIAL NUMBER PLATE BB NFS METAL TACK ADAPTER, HYD STRAIGHT PIN WLD`MT, 11-1/2" LG FLATWASHER, 1-3/8" TYPE B NARROW SLOTTED NUT, 1-3/8"-12NF PLB COTTER PIN, 5/16" X 2-1/2" PL BOLT, HEX HEAD 3/8"-NC X 2-3/4" PL GR PIN, 1-1/2" X 9" CHROME KEY, 1/4" SQ KEY 1-1/4" LG Alamo Group Inc. Parts Section -77

83 BUZZBAR ASY - 69 IN (PART 3) - PN Alamo Group Inc. Parts Section -78

84 BUZZBAR ASY - 69 IN (PART 3) - PN Continued INSERT SHEET, BUZZBAR MACHETE RELIEF MANIFOLD ASY, 2900 PSI CAP NUT, # 4FJ VINYL TAPE BLUE 1/ COTTER PIN, 1/8" X 1" WASHER, PLATED MOTOR MOUNT TUBE, MACHINED 2018 Alamo Group Inc. Parts Section -79

85 BUZZBAR ASY - 90 IN (PART 1) - PN ASY 4 BLADE SAW HEAD END CAP 2018 Alamo Group Inc. Parts Section -80

86 BUZZBAR ASY - 90 IN (PART 1) - PN Continued SPACER ASY SPINDLE CSSH 1/2 NC 3-1/ CSSH 1/2 NC NUT, SLOTTED 1/2 NC PLB NUT 1/2 NC HEX PL USE BRACKET TENSION ADJUSTMENT NUT 1/2-20NF 90DEG.CONE LUG PL HHCS 1/2 NC 3-1/2 PL BELT POLY-V 615L SHEAVE POLY-V 20L6.00 W/GROOVE BUSHING QD-SK 1-1/ SHEET, BELT COVER LONG, STUD QUICK RELEASE W/RING RETAINER FOR QUICK RELEASE RECEIVER FOR QUICK RELEASE HEXB 3/8 NC 1 PL FLATWASHER STD 3/ LOCKNUT TLM 1/2 NC PLC ASY,DRIVE SPINDLE MOTOR,PISTON-2.48 CU.IN./REV HHCS 1/2-13UNC 1-3/4 PL HUB 20R10 1-1/8 BORE 1/4 KEY INSERT, URETHANE FOR 20R COVER, PROTECTIVE NYLON FOR HUB 20R10 1-1/8 BORE 5/16 KEY SHEET, BELT COVER SHORT WLDMT HITCH POST NUT 3/4-NC TOPLOCK GRC PL PLATE,HITCH POST CLAMP HEXB 3/4-10UNC 2 PL WLDMT HITCH TUBE 4 BLADE SAW LOCKNUT TLM 3/8-NC PLC HHCS 3/8-16UNC 1-1/2 PL BUMPER WLDMT SHIELD REAR SAW BLADE PACKAGE OF VINYL TAPE RED 1/2" WIDE 2018 Alamo Group Inc. Parts Section -81

87 BUZZBAR ASY - 90 IN (PART 2) - PN ADP HYD STGHT 16MB-16MJ VINYL TAPE ORANGE 1/ Alamo Group Inc. Parts Section -82

88 BUZZBAR ASY - 90 IN (PART 2) - PN Continued ADP HYD TEE 16FJX-16MJ-16MJ HOSE #16-16FJX -16FJX45-74LG HOSE ADP HYD STGHT 16FJ-8MJ HOSE #8-8FJX - 8FJX - 80LG ADP HYD STGHT 8MB - 8FJX ADP HYD ELBOW 8MB - 8MJ 90? HOSE #8-8FJX - 8FJX - 17LG DECAL,WARNING BELT SHIELD DECAL,USE/REPAIR GUARDS DECAL,BLADES THROWN OBJECTS DECAL-REPLACEMENT PARTS DECAL-TRACTOR OPERATOR SAFETY DECAL - PINCH POINTS DECAL-SHIELD MISSING DECAL-,WARNING OIL LEAK DECAL, MULTI-HAZARD DECAL, ALAMO INDUSTRIAL DECAL BUZZBAR 62 D138 1 DECAL,CW BLADE ROTATION DECAL HEAR PROTECTION REQD DECAL ROTATING BLADES DECAL WARNING DISCONNECT DECAL NO HITCH POST HERE PLATE SERIAL NUMBER BB DECAL, ALAMO IND. GREEN &BLACK DECAL,RED REFLECTOR DECAL,YELLOW REFLECTOR ADP HYD STGHT 8MB-8MJ WELDMENT, PIN /2LG FLATWASHER 1-3/8 TYPE B NARROW NUT SLOT 1-3/8 12NF PLB PIN, COTTER 5/16 X 2-1/2 PL HHCS 3/8 NC 2-3/4 PL PIN, 1-1/2 X 9 CHROME KEY 1/4 SQ X 1 1/4 LG Alamo Group Inc. Parts Section -83

89 BUZZBAR ASY - 90 IN (PART 3) - PN INSERT SHEET BUZZBAR MACHETE ASY RELIEF MANIFOLD 2900 PSI 2018 Alamo Group Inc. Parts Section -84

90 BUZZBAR ASY - 90 IN (PART 3) - PN Continued CAP-NUT #4FJ VINYL TAPE BLUE 1/2" WIDE PIN, COTTER 1/8 X WASHER, FLAT, PLATED MACHINED TUBE, MOTOR MOUNT 2018 Alamo Group Inc. Parts Section -85

91 BUZZBAR MOTOR ASSEMBLY 2018 Alamo Group Inc. Parts Section -86

92 BUZZBAR MOTOR ASSEMBLY Continued MOTOR,PISTON-2.48 CU.IN./REV ASSY, ROTATING KIT O-RING KIT,HIGH PRESSURE, SEAL & RING WASHER BRG. & RACE SET SEAL KIT 2018 Alamo Group Inc. Parts Section -87

93 BUZZBAR SPINDLE ASY - SN BB SPINDLE ASY, DRIVE SPINDLE (SHOWN) SPINDLE ASY, NON-DRIVE (NOT SHOWN) SPINDLE HOUSING, MACHINED SPINDLE SHAFT, NON-DRIVE SPINDLE SPINDLE SHAFT, DRIVE SPINDLE COLLAR, BEARING PRELOAD BEARING CUP, UPPER OR LOWER BEARING CONE, UPPER OR LOWER 6 15C WASHER, 1-1/4" HARDEND 7 5D SLOTTED HEX NUT, 1-1/4"-12NF PL SEAL, UPPER OR LOWER GREASE FITTING, 1/8" STRAIGHT GREASE RELIEF FITTING, 1-5LBS BOLT, STUD 1/2"-20NF X 1-7/8" COTTER PIN, 3/16" X 2" 2018 Alamo Group Inc. Parts Section -88

94 DITCHER - BLADE CARRIER ASY BLADE HEAD ASY, W/ BLADES (FORWARD ROTATION) BLADE HEAD WLD`MT WEAR PLATE BOLT LOCKNUT TLM 1/2 NC PLC MOUNT BRACKET BLADE, ROUGH CUT SHIM KIT FOR ROUGH CUT BLADES BOLT BOLT LOCKWASHER NUT 2018 Alamo Group Inc. Parts Section -89

95 DITCHER - HOUSING ASY DITCHER HOUSING ASY HOUSING WLD`MT DEFLECTOR HINGE PIN FLATWASHER COTTER PIN BACK-UP PLATE BOLT LOCKWASHER NUT CYLINDER ASY CYLINDER PIN B13 4 HAIR PIN CLIP RUBBER DEFLECTOR DEFLECTOR CLAMP BAR BOLT BOLT BOLT LOCKWASHER NUT HOUSING COVER 2018 Alamo Group Inc. Parts Section -90

96 DITCHER - HOUSING ASY Continued FLATWASHER ADAPTER, STRAIGHT BOLT 2018 Alamo Group Inc. Parts Section -91

97 DITCHER - SPINDLE ASY SPINDLE ASY (ITEMS 1 THRU 14) SPINDLE HSG, W/ BRG CUPS & GREASE FITTING BEARING CUP BEARING CONE SEAL SPINDLE SHAFT SPACER NUT GREASE FITTING COUPLING HALF, SPINDLE KEY COUPLING HALF, MOTOR CHAIN COUPLING SETSCREW RELIEF FITTING 2018 Alamo Group Inc. Parts Section -92

98 THIS PAGE INTENTIONALLY LEFT BLANK 2018 Alamo Group Inc. Parts Section -93

99 DITCHER BLADE HEAD ASY - ROUGH CUT 2018 Alamo Group Inc. Parts Section -94

100 DITCHER BLADE HEAD ASY - ROUGH CUT Continued BLADE HEAD WLD`MT WEAR PLATE MOUNT BRKT-ROUGH CUT BLADE WLD`MT ROUGH CUT, DITCHER BLADE LOCKNUT, 3/4" NC GRC PL LOCKWASHER, 3/4" PL HEAVY LOCKNUT TLM 1/2 NC PLC HEX HEAD CAP SCREW, 1/2" NC 1-3/4 PL CARRIAGE BOLT, 1/2" 13UNC 1-1/2" PL CARRIAGE BOLT, 3/4" NC 2-1/2" PL Alamo Group Inc. Parts Section -95

101 DITCHER HEAD ASY - (NEW STYLE) MACHETE/MAVERICK DITCHER ASY HITCHPOST WLD`MT, BOOM MOUNT PLATE SPACER ON DITCHER MOTOR GEROLER, 7.95 CID SEAL KIT, REAR MTR SEAL KIT, SHAFT MTR SHAFT ASY, 1 1/4-14T BLADE, HSG ASY SPINDLE ASY BLADE, HEAD ASY. ROUGH CUT 2018 Alamo Group Inc. Parts Section -96

102 DITCHER HEAD ASY - (NEW STYLE) Continued LOCKWASHER, 1/2" PL STD FLATWASHER, 3/4" TYPE AW,ZP LOCKNUT TLM 1/2 NC PLC LOCKNUT, 3/4" NC GRC PL HEX HEAD BOLT, 1/2" NC 1-3/4" PL HEX HEAD BOLT, 3/4" NC 3-1/2" PL HEX HEAD BOLT, 1/2" NC 2-1/4" PL ADP HYD STRAIGHT, 10MB - 16MJ RELIEF VALVE, INLINE 160 PSI ADAPTER, HYD, STRIAGHT DECAL, WARNING SHIELDS & GRDS DECAL, WARNING HOSE BURST DECAL, REPLACEMENT PARTS DECAL, ALAMO INDUSTRIAL LOGO DECAL, BOOM DITCHER DECAL, DITCHER VINYL TAPE GREEN 1/2" WIDE VINYL TAPE RED 1/2" WIDE VINYL TAPE GREEN 1/2" WIDE PIN WELDMENT, 11-1/2" LG PIN, 1-1/2" X 9" CHROME LOCKNUT, 3/8" NC PLC HEX HEAD BOLT, 3/8" NC 2-3/4" PL SLOTTED NUT, 1-3/8" 12NF PLB FLATWASHER, 1-3/8" TYPE B NARROW COTTER PIN, 5/16" X 2-1/2" PL DECAL, MULTI HAZ HOSE, #16-16FJX - 16FJX 90-62" LG HOSE, #16-16FJX - 16FJX 90-54" LG H0SE, #8-8FJX - 8FJX 90-54" LG HOSE, #4-4FJX - 6FJX 90-80" LG HOSE, #4-4FJX - 6FJX 90-88" LG VINYL TAPE YELLOW 1/2" WIDE VINYL TAPE YELLOW 1/2" WIDE 2018 Alamo Group Inc. Parts Section -97

103 DITCHER HEAD ASY - (OLD STYLE) DITCHER HEAD ASY LOCKWASHER LOCKNUT TLM 1/2 NC PLC FLATWASHER LOCKNUT LOCKNUT 2018 Alamo Group Inc. Parts Section -98

104 DITCHER HEAD ASY - (OLD STYLE) Continued SPACER PLATE HOUSING ASY BLADE HEAD ASY BOLT BOLT PLASTIC CAP, OUTER 1/4" (NOT SHOWN) PLASTIC PLUG, INNER 3/8" (NOT SHOWN) PLUG, (NOT SHOWN) PLASTIC CAP, OUTER 3/8" (NOT SHOWN) BOLT DITCHER MOUNT PIN, 1-1/4" DIA PIN, 1-1/2" DIA MOTOR (FEB & DOWN) 11.9 CID (MOTOR LENGTH 10-5/8" LONG FROM MOUNT FLANGE TO END OF MOTOR MOTOR (MAR & UP) 7.95 CID (MOTOR LENGTH MEASURES 8-5/8" FROM MOUNT FLANGE TO END OF MOTOR, TH SEAL KIT, REAR (F/ MOTOR ONLY) SEAL KIT, SHAFT (F/ MOTOR ONLY) SHAFT ASY. 1-1/4" -14T (F/ MOTOR ONLY)? SEAL KIT, FRONT & REAR HALF COMPLETE (F/ MOTOR P/N ONLY) SEAL KIT, FRONT HALF ONLY (F/ MOTOR SEAL KIT, REAR HALF ONLY (F/ MOTOR P/N ONLY) MOTOR INPUT SHAFT (F/ MOTOR P/N ONLY) SPINDLE ASY SWING BAR (NOT SHOWN) CAP NUT (NOT SHOWN) BOLT HOSE HOSE HOSE ADAPTER, ELBOW ADAPTER, STRAIGHT ADAPTER, STRAIGHT ADAPTER, ELBOW 45? ADAPTER, STRAIGHT (USED W/ MOTOR P/N ) ADAPTER, STRAIGHT (USED W/ MOTOR P/N ) ADAPTER, STRAIGHT LOW PRESSURE RELIEF 2018 Alamo Group Inc. Parts Section -99

105 DITCHER HEAD DEFLECTOR CYLINDER DEFLECTOR CYLINDER, W/FITTINGS A - HYDRAULIC CYLINDER TUBE WELDMENT HEAD,CYLINDER ROD WELDMENT PISTON 5 5JRC LOCKNUT, 3/4" NF PLC ADAPTER, HYD, STRAIGHT PIN-CYLINDER PIN-CLIP 9* SEAL, GLAND 10* O-RING 11* SEAL, ROD 12* SEAL, ROD WIPER 13* SEAL, PISTON SEAL KIT (ITEMS WITH * ARE INCLUDED IN SEAL KIT) 2018 Alamo Group Inc. Parts Section -100

106 THIS PAGE INTENTIONALLY LEFT BLANK 2018 Alamo Group Inc. Parts Section -101

107 FILTER ASY - PN Alamo Group Inc. Parts Section -102

108 FILTER ASY - PN Continued FILTER ASY, W/ BY-PASS (OLD STYLE) VISUAL INDICATOR, W/ BY-PASS (OLD STYLE) VISUAL INDICATOR (NEW STYLE AS OF ) O-RING BY-PASS VALVE (NEW STYLE AS OF NOT SHOWN) FILTER HEAD FOR O-RING FILTER REPLACEMENT ELEMENT O-RING BACK-UP RING O-RING FILTER BOWL, (OLD STYLE W/ RIBS) FILTER BOWL, (NEW STYLE W/O RIBS) 2018 Alamo Group Inc. Parts Section -103

109 FILTER ASY - PN FILTER ASY, HEAD BOWL, FILTER ASY FILTER, ELEMENT INDICATOR, VISUAL SEAL KIT W/ O-RING 2018 Alamo Group Inc. Parts Section -104

110 FLAIL AXE - DOOR CYL ASY - PN A A - CYLINDER ASY, FLAIL AXE DOOR CYL. 1 * SEAL KIT 3 BACK-UP RING 2 * SEAL KIT 2 O-RING 3 * SEAL KIT 1 O-RING 4 * SEAL KIT 1 LOCKWIRE 5 * SEAL KIT 1 O-RING 6 * SEAL KIT 1 BACK-UP RING 7 * SEAL KIT 1 ROD WIPER TUBE 9 5JRC LOCKNUT PISTON ROD HEAD GLAND SEAL KIT, (ITEMS 1 THRU 7) 2018 Alamo Group Inc. Parts Section -105

111 FLAIL AXE - HOSE CONNECTIONS HOSE, LARGE (W/ RED TIE) HOSE, MEDIUM (W/ BLUE TIE) ADAPTER, LARGE TO MEDIUM HOSE, LARGE (W/ ORANGE TIE) VINYL TAPE GREEN 1/2" WIDE VINYL TAPE BLUE 1/2" WIDE VINYL TAPE RED 1/2" WIDE 2018 Alamo Group Inc. Parts Section -106

112 THIS PAGE INTENTIONALLY LEFT BLANK 2018 Alamo Group Inc. Parts Section -107

113 FML100H FLAIL - HEAD ASY (PART 1) FLAIL HEAD ASY, FML100H HOOD, COWLING 2018 Alamo Group Inc. Parts Section -108

114 FML100H FLAIL - HEAD ASY (PART 1) Continued SHIELD DOOR HITCH POST CUTTERSHAFT PULLEY, UPPER PULLEY, LOWER PULLEY LOCK, UPPER PULLEY LOCK, LOWER BELT GUARD CYLINDER ASY, DOOR BOTTOM PLATE RUBBER FLAP V-BELT KNIFE PIN, CYLINDER LINK ROD, CUTTER BAR BOLT BOLT BOLT LOCKING TAB BOLT BOLT NUT WASHER BOLT GREASE TUBE SPACER ADAPTER RING SUPPORT BEARING SUPPORT BOLT SEAL SEAL BEARING, DRIVE END BEARING, NON DRIVE END RETAINING RING SEAL GUARD, ROTOR END COVER, BEARING BOLT GREASE NIPPLE BOLT 2018 Alamo Group Inc. Parts Section -109

115 FML100H FLAIL - HEAD ASY (PART 2) CUTTERSHAFT GUARD, UPPER HALF CUTTERSHAFT GUARD, LOWER HALF 2018 Alamo Group Inc. Parts Section -110

116 FML100H FLAIL - HEAD ASY (PART 2) Continued WASHER C 2 NUT WASHER BOLT NUT LOCKWASHER NUT BOLT BOLT ADAPTER HOSE, CASE DRAIN - W/ BLUE TIE ADAPTER HOSE, PRESSURE - W/ RED TIE VINYL TAPE RED 1/2" WIDE VINYL TAPE GREEN 1/2" WIDE VINYL TAPE BLUE 1/ HOSE, RETURN - W/ ORANGE TIE ADAPTER SPINDLE ASY MOTOR ASY BOLT LOCKWASHER ROD, THREADED DOUBLE ACTING, CLOSING VALVE HOSE QUICK COUPLER WASHER SETSCREW BANJO BOLT WASHER ADAPTER GREASE FITTING SETSCREW BANJO BOLT NUT BOLT, HEX HEAD PIN PIN WLD`MT COTTER PIN 2018 Alamo Group Inc. Parts Section -111

117 FML100H FLAIL - HEAD ASY (PART 3) SLOTTED NUT FLATWASHER 2018 Alamo Group Inc. Parts Section -112

118 FML100H FLAIL - HEAD ASY (PART 3) Continued SKID SHOE, RH SKID SHOE, LH BOLT WASHER NUT SPACER RING 2018 Alamo Group Inc. Parts Section -113

119 FML100H FLAIL - SPINDLE ASY - PN SPINDLE ASY, F/ FML 100H FLAIL HEAD HOUSING SPINDLE BEARING CUP BEARING CONE SEAL BEARING ASY, CUP & CONE LOCKWASHER LOCKNUT, BEARING ADJUSTING NUT FITTING, RELIEF PLUG 2018 Alamo Group Inc. Parts Section -114

120 GRASS FLAIL - CUTTERSHAFT ASY CUTTERSHAFT ASY, W/ KNIVES (1500 HEAD) CUTTERSHAFT WLD`MT BOLT WASHER LOCKNUT SHACKLE FLAIL KNIFE, SMOOTH STD FLAIL KNIFE, SERRATED OPT 2018 Alamo Group Inc. Parts Section -115

121 GRASS FLAIL - CUTTERSHAFT BRGS BEARING ASY, GRASS FLAIL 1500 HEAD WASHER SETSCREW SETSCREW WASHER,LOCK 12MM SHAKE PROOF WASHER NUT BOLT, SOCKET HEAD COUNTER SUNK DISC, SHIELD BEARING ASY BEARING PLATE, NON-DRIVE END BOLT, ADJUSTING BEARING PLATE, DRIVE END GUARD, NON-DRIVE END 2018 Alamo Group Inc. Parts Section -116

122 THIS PAGE INTENTIONALLY LEFT BLANK 2018 Alamo Group Inc. Parts Section -117

123 GRASS FLAIL - HEAD ASY PN GRASS FLAIL HEAD ASY LOCKNUT 2018 Alamo Group Inc. Parts Section -118

124 GRASS FLAIL - HEAD ASY PN Continued NUT,TOPLOCK 5/8 NC PLC ADAPTER, ELBOW 90? PLASTIC TIE, 21" LG BOLT ADAPTER, STRAIGHT SLEEVING, 100" LG ADAPTER, ELBOW 90? CLAMP PLATE ADAPTER, STRAIGHT HOSE - W/ RED TIE HOSE - W/ BLUE TIE HOSE - W/ ORANGE TIE MOTOR ASY, PISTON TYPE FLAIL HEAD PRE-ASY SLOTTED NUT FLATWASHER PIN PIN, CHROME BOLT COTTER PIN ADAPTER, ELBOW 90? VINYL TAPE RED 1/2" WIDE VINYL TAPE ORANGE 1/ VINYL TAPE BLUE 1/2" WIDE HITCH POST 2018 Alamo Group Inc. Parts Section -119

125 GRASS FLAIL - HEAD SUB-ASY FLAIL HEAD SUB-ASY, 1500 HEAD TENSION PIN 2018 Alamo Group Inc. Parts Section -120

126 GRASS FLAIL - HEAD SUB-ASY Continued SETSCREW SETSCREW SETSCREW FLATWASHER, PLATED FLATWASHER, PLATED LOCKWASHER, PLATED WASHER,LOCK 12MM NUT, PLATED NUT, PLATED LOCKNUT BOLT CUP SQUARE GUARD, TOP DRIVE GUARD, BOTTOM DRIVE BACKING STRIP (1500) GUARD, FLEXIBLE (1500) CLAMP, GUARD GUARD, FLEXIBLE (1500) COWL, (1500) GUARD, FRONT FIXED (1500) GUARD, FRONT ADJUSTABLE (1500) SPACER. PIVOT FRONT GUARD PIN, PIVOT FRONT GUARD BOLT CUP SQUARE 2018 Alamo Group Inc. Parts Section -121

127 GRASS FLAIL - PULLEY ASY PULLEY ASY, GRASS FLAIL 1500 HEAD PULLEY STUD WASHER WASHER,LOCK 12MM NUT TAPER LOCK HUB, 1-1/8" BORE TAPER LOCK HUB, 1-9/16" BORE SCREW BELT 2018 Alamo Group Inc. Parts Section -122

128 GRASS FLAIL - PULLEY ASY Continued KEY PLATE, COVER PLATE 2018 Alamo Group Inc. Parts Section -123

129 GRASS FLAIL - ROLLER ASY ROLLER ASY, GRASS FLAIL 1500 HEAD (ITEMS 1 THRU 10) BRACKET, LH (NOT SHOWN) BRACKET, RH CIRCLIP BEARING SEAL CAP GREASE FITTING WASHER BOLT, SOCKET HEAD WASHER,LOCK 12MM ROLLER WLD`MT, (1500 HEAD) 2018 Alamo Group Inc. Parts Section -124

130 THIS PAGE INTENTIONALLY LEFT BLANK 2018 Alamo Group Inc. Parts Section -125

131 HIGH FRAME ASY - 2 WD & 4 WD 2018 Alamo Group Inc. Parts Section -126

132 HIGH FRAME ASY - 2 WD & 4 WD Continued HIGH FRAME ASY, 2 WHL DRIVE HIGH FRAME ASY, 4 WHL DRIVE HIGH FRAME WLD`MT, 2 WHL DRIVE HIGH FRAME WLD`MT, 4 WHL DRIVE KING POST FRAME SUB-ASY PIN WLD`MT TUBE SPACER BOLT FLATWASHER LOCKNUT TLM 1/2 NC PLC BOLT LOCKNUT FLATWASHER, HARDENED CYLINDER ASY, LIFT CYL DECAL, SPANISH TRANSLATION ELBOW DECAL, MULTI-HAZARD DECAL, HOSE BURST 2018 Alamo Group Inc. Parts Section -127

133 HYD CYL ASY - DIPPER - PN A (21 & 24 FT) DIPPER CYL. ASY, W/ FITTINGS A - DIPPER CYL. ASY, L/ FITTINGS TUBE / BARREL WLD`MT CYLINDER HEAD PISTON ROD WLD`MT 5 * SEAL KIT 1 O-RING (IN ITEM 17) 6 * SEAL KIT 1 SEAL ROD, HALITE (IN ITEM 17) 7 * SEAL KIT 3 SEAL, WIPER ROD (IN ITEM 17) 8 * SEAL KIT 2 SEAL, PISTON RING (IN ITEM 17) 9 * SEAL KIT 1 WEAR RING (IN ITEM 17) 10 * SEAL KIT 1 WEAR RING (IN ITEM 17) LOCKNUT BUSHING 13 * SEAL KIT 1 SEAL (IN ITEM 17) ELBOW VINYL TAPE BLUE 1/4" WIDE VINYL TAPE BLUE 1/2" WIDE SEAL KIT (ITEMS 5,6,7,8,9, 10 & 13) 2018 Alamo Group Inc. Parts Section -128

134 HYD CYL ASY - DIPPER - PN (17 FT) DIPPER CYLINDER ASY CYLINDER HEAD ADAPTER, ELBOW VINYL TAPE BLUE 1/2" WIDE VINYL TAPE BLUE 1/4" WIDE BUSHING 6 5JRC LOCKNUT PISTON ROD WLD`MT CYLINDER HEAD TUBE / BARREL WLD`MT SEAL KIT 2018 Alamo Group Inc. Parts Section -129

135 HYD CYL ASY - LIFT - PN A LIFT CYL. ASY, W/ FITTINGS A - LIFT CYL. ASY, L/ FITTINGS TUBE / BARREL WLD`MT CYLINDER HEAD PISTON ROD WLD`MT 5 * SEAL KIT 1 O-RING (IN ITEM 17) 6 * SEAL KIT 1 SEAL ROD, HALITE (IN ITEM 17) 7 * SEAL KIT 3 SEAL, WIPER ROD (IN ITEM 17) 8 * SEAL KIT 2 SEAL, PISTON RING (IN ITEM 17) 9 * SEAL KIT 1 WEAR RING (IN ITEM 17) 10 * SEAL KIT 1 WEAR RING (IN ITEM 17) LOCKNUT 12 * SEAL KIT 2 SEAL (IN ITEM 17) BUSHING ELBOW VINYL TAPE ORANGE 1/4" WIDE VINYL TAPE ORANGE 1/2" WIDE SEAL KIT (ITEMS 5,6,7,8,9, 10 & 12) 2018 Alamo Group Inc. Parts Section -130

136 HYD CYL ASY - SWING - PN A SWING CYL. ASY, W/ FITTINGS A - SWING CYL. ASY, L/ FITTINGS TUBE / BARREL WLD`MT CYLINDER HEAD PISTON ROD WLD`MT 5 * SEAL KIT 1 O-RING (IN ITEM 16) 6 * SEAL KIT 1 SEAL ROD, HALITE (IN ITEM 16) 7 * SEAL KIT 3 SEAL, WIPER ROD (IN ITEM 16) 8 * SEAL KIT 2 SEAL, PISTON RING (IN ITEM 16) 9 * SEAL KIT 1 WEAR RING 10 5JRC LOCKNUT 11 *SEAL KIT 1 SEAL, CYL. HEAD (IN ITEM 16) ELBOW VINYL TAPE GREEN 1/4" WIDE VINYL TAPE GREEN 1/2" WIDE BUSHING SEAL KIT (ITEMS 5,6,7,8,9 & 11) FITTING,GREASE STRAIGHT 1/ Alamo Group Inc. Parts Section -131

137 HYD CYL ASY - TILT - PN A TILT CYL. ASY, W/ FITTINGS A - TILT CYL. ASY, L/ FITTINGS TUBE / BARREL WLD`MT CYLINDER HEAD PISTON ROD WLD`MT 5 * SEAL KIT 1 O-RING (IN ITEM 17) 6 * SEAL KIT 1 SEAL ROD, HALITE (IN ITEM 17) 7 * SEAL KIT 3 SEAL, WIPER ROD (IN ITEM 17) 8 * SEAL KIT 2 SEAL, PISTON RING (IN ITEM 17) 9 * SEAL KIT 1 WEAR RING (IN ITEM 17) LOCKNUT 11 *SEAL KIT 1 SEAL, CYL. HEAD (IN ITEM 17) ELBOW VINYL TAPE RED 1/2" WIDE VINYL TAPE RED 1/4" WIDE BUSHING BUSHING SEAL KIT (ITEMS 5,6,7,8,9 & 11) 2018 Alamo Group Inc. Parts Section -132

138 HYD LOCK VALVE SOLENOID ASY - PN (OLD STYLE) VALVE SOLENOID ASY SEAL KIT, SOLENOID COIL, SOLENOID CARTRIDGE, VALVE 2018 Alamo Group Inc. Parts Section -133

139 HYD LOCK VALVE SOLENOID ASY - PN A (NEW STYLE) A - LOCK VALVE & SOLENOID ASY F/ DIN CONNECTOR SEAL KIT, SOLENOID VALVE COIL 12V DC W/DIN CONNECTION CARTRIDGE,SOLENOID VALVE BODY, SOLENOID VALVE CONNECTOR COIL DIN CONNECTOR ADAPTER,HYD (NOT INCLUDED) ADAPTER, HYD (NOT INCLUDED) 2018 Alamo Group Inc. Parts Section -134

140 THIS PAGE INTENTIONALLY LEFT BLANK 2018 Alamo Group Inc. Parts Section -135

141 HYD TANK ASY - PN (OCFD) & PN (CCLS) OIL RESERVOIR ASY, OCFD VALVE OIL RESERVOIR ASY, CCLS VALVE LOCKWASHER BOLT LOCKNUT FLATWASHER ADAPTER, STRAIGHT ELBOW, 90 DEG ADAPTER, ELBOW ADAPTER, 45 DEG ELBOW VALVE ASY, OCFD (FIXED DISPLACEMENT) 2018 Alamo Group Inc. Parts Section -136

142 HYD TANK ASY - PN (OCFD) & PN (CCLS) Continued VALVE ASY, CCLS (LOAD SENSE) VALVE MOUNT PLATE HYDRAULIC HOSE A - PUMP ASY, FRONT (NEW PUMP) RB - PUMP ASY, FRONT (REBUILT PUMP) PUMP SEAL KIT PUMP SHAFT SEAL SOLENOID SERVO CONTROL ADAPTER HOSE HOSE ADAPTER, ELBOW TANK ASY VINYL TAPE RED 1/2" WIDE VINYL TAPE GREEN 1/2" WIDE VINYL TAPE BLUE 1/2" WIDE PRESSURE FILTER HEAD PRESSURE FILTER ELEMENT FILTER ASY IN-LINE MACHETE BOLT LOCKNUT ADAPTER PLUG, HEX ADAPTER ADAPTER BOLT HOSE DECAL, INST. HYD HOSE ADAPTER, STRAIGHT ADP HYD ELBOW 12MB - 8MJ Alamo Group Inc. Parts Section -137

143 HYD TANK SUB-ASY - PN HYDRAULIC TANK SUB-ASY TANK, WITH VALVE & FILTER MOUNT COVER, TANK CLEANOUT HHCS 1/2 NC PL LOCKWASHER 1/ CAP, ASY FILLER/BREATHER STARWASHER #10 PLATED STRAINER, SUCTION 1-1/4 WITH 3/4" OULET PLUG, MAGNETIC 1" NPT ADP, HYD TEE 16FP -16FP-16FP REDUCER BUSHING 16MP-8FP SCREW METRIC 5-P0.8-12MM GAUGE,SIGHT, TEMPERATURE PLUG CAP, 1/2 NPT CAP PLUG,3/4 NPT SQ. HEAD 2018 Alamo Group Inc. Parts Section -138

144 THIS PAGE INTENTIONALLY LEFT BLANK 2018 Alamo Group Inc. Parts Section -139

145 JOYSTICK CONSOLE ASY 2018 Alamo Group Inc. Parts Section -140

146 JOYSTICK CONSOLE ASY Continued JOYSTICK ASSEMBLY W/ COMPONENTS LED RED 12VDC DECAL JOYSTICK OPERATION CNSLE SWITCH MOMNTRY PUSHBUTTON RED 3A PUSH BUTTON COVER, RED SWITCH MOMNTRY PUSHBUTTON BLK 4A PUSH BUTTON COVER, BLACK SOCKET RELAY RELAY SPDT 12VDC 20A CIRCUIT BREAKER 10A PANEL MNT BOOT CIRCUIT BREAKER COVER CONNECTOR RECEPTACLE 9A PIN, AWG 9B PIN, 12AWG SWITCH ROCKER DPDT W/GREEN LED SWITCH PUSH PULL JOYSTICK ASSEMBLY HANDLE ASSEMBLY DECAL SWITCH OPERATION HANDLE ASSEMBLY PUSHBUTTON FACE PLATE SWITCH MOMENTARY PUSHBUTTON LOCKWASHER - 24 SHELL SIZE NUT, PANEL - 24 SHELL SIZE POTENTIOMETER - SWING POTENTIOMETER - LIFT & DIPPER MACHINE SCREW # /8 LG WASHER #10 NYLON LOCKNUT 8-32 PL TRIGGER SWITCH HARNESS,RESISTOR,DANFOSS VLV 2018 Alamo Group Inc. Parts Section -141

147 KING POST SUB-ASY 2018 Alamo Group Inc. Parts Section -142

148 KING POST SUB-ASY Continued SUB-ASSEMBLY KINGPOST FRAME KIT, GREASABLE, KINGPOST MOUNT ASY,SWING CYL GREASEABLE PIN 2-1/2 OD X 20-11/16 LONG KIT, GREASABLE, KINGPOST BUSHING CONNEX 1-3/4 X1-1/2X BSHG TF 1-3/4OD X 1-1/2ID X WLDMT PIN 1-1/2 X 3-9/16 LG HHCS 1/2-13UNC 1-1/2 PL TUBE SPACER 3/4 OD X.51 ID X FLATWASHER 1/2 PL STD LOCKNUT TLM 1/2 NC PLC WASHER,THRUST-5OD X 2-9/16ID WLDMT PIN 1-1/2 OD X 6 LG BSHG TF-2-3/4OD X 2-1/2ID X BUSHING CONNEX 2-3/4 X2-1/2X HHCS 1/2 NC 4-1/2 PL HHCS 3/4 NC 2-1/2 PL NUT 3/4 NC HEX PL JAM SNAP RING INTERNAL DIA X FITTING,GREASE STRAIGHT 1/4-28 NOTE: TEFLON BUSHINGS ARE STILL AVAILABLE FOR NON GREASEABLE KING POST AND KING POST MOUNTING Alamo Group Inc. Parts Section -143

149 MOUNTING COMPONENTS - COMMON BOX (PART 1) 2018 Alamo Group Inc. Parts Section -144

150 MOUNTING COMPONENTS - COMMON BOX (PART 1) Continued COMMON PARTS BOX, F/ OCFD VALVE COMMON PARTS BOX, F/ CCLS VALVE LOCKNUT TLM 1/2 NC PLC FLATWASHER LOCKNUT STRAP PIN COTTER PIN BRASS WASHER, F/ HINGE BOLT BOLT BOLT BOLT BUMPER MOUNT STRAP MOUNT ANGLE TANK & PUMP COVER ASY JSTK CONSOLE, SAMURAI WIRING HARNESS (VALVE ON FRAME) CONNECTOR CONNECTOR WIRE HARNESS (VALVE UNDER PUMP COVER) ARM REST BOLT FLATWASHER NUT PIVOT PLATE BOLT FRAME TUBE HOSE (W/ ORANGE TIE) HOSE (W/ RED TIE) HOSE (W/ BLUE TIE) SLEEVING, F/ # 16 HOSES BOOM TO FRAME & FRAME TO PUMP PLASTIC TIE OCFD TANK & VALVE ASY CCLS TANK & VALVE ASY HOSE, LIFT CYL ROD (ORANGE TIE) HOSE, LIFT CYL BASE (ORANGE W/ WHITE STRIPE TIE) * NUT (IN ITEM 36) HOSE, SWING CYL ROD (GREEN TIE) 2018 Alamo Group Inc. Parts Section -145

151 MOUNTING COMPONENTS - COMMON BOX (PART 2) 2018 Alamo Group Inc. Parts Section -146

152 MOUNTING COMPONENTS - COMMON BOX (PART 2) Continued HOSE, SWING CYL BASE (GREEN W/ WHITE STRIPE TIE) * 1 HARDWARE KIT (* INCLUDES ALL THE FOLLOWING ITEMS) * LOCKWASHER (IN ITEM 36) LOCKNUT TLM 1/2 NC PLC (IN ITEM 36) FLATWASHER (IN ITEM 36) FLATWASHER (IN ITEM 36) BOLT (IN ITEM 36) LOCKWASHER (IN ITEM 36) LOCKWASHER (IN ITEM 36) LOCKNUT (IN ITEM 36) LOCKNUT (IN ITEM 36) BOLT (IN ITEM 36) DECAL, MULTI-HAZARD (IN ITEM 36) DECAL, ALAMO LOGO (IN ITEM 36) STRAP (IN ITEM 36) PIN (IN ITEM 36) COTTER PIN (IN ITEM 36) WASHER, BRASS SPECIAL (IN ITEM 36) FLATWASHER (IN ITEM 36) BOLT (IN ITEM 36) PLASTIC TIE (IN ITEM 36) BOLT (IN ITEM 36) BOLT (IN ITEM 36) BOOM REST HOOK (IN ITEM 36) BOLT (IN ITEM 36) BOLT (IN ITEM 36) DECAL, TRACTOR OPERATOR (IN ITEM 36) PAMPLET, SAFETY MOUNT (IN ITEM 36) DECAL, ALAMO GROUP (IN ITEM 36) CORDURA SLEEVING, 54" LONG (IN ITEM 36) CORDURA SLEEVING, 69" LONG (IN ITEM 36) PIVOT PLATE WLD`MT (IN ITEM 36) DECAL, PROPER ENGINE SPEED (IN ITEM 36) DECAL, WARNING HOSE (IN ITEM 36) DECAL, AW ISO VG 100 TRAC, HYD FLUID (IN ITEM 36) BAR, MOUNT STRAP (IN ITEM 36) BAR, MOUNT ANGLE (IN ITEM 36) DECAL, MULTI-HAZZARD (IN ITEM 36) HOSE, # 16 X 52" LONG W/ ORANGE TIE (IN ITEM 36) HOSE, # 16 X 52" LONG W/ RED TIE (IN ITEM 36) HOSE, # 16 X 52" LONG W/ BLUE TIE (IN ITEM 36) 2018 Alamo Group Inc. Parts Section -147

153 MOUNTING COMPONENTS - COMMON BOX (PART 3) 2018 Alamo Group Inc. Parts Section -148

154 MOUNTING COMPONENTS - COMMON BOX (PART 3) Continued CORDURA SLEEVING, 54" LONG (IN ITEM 36) OPERATORS MANUAL (IN ITEM 36) DECAL, MACHETE (IN ITEM 36) DRAWING, INSTR. COUNTER WEIGHT (IN ITEM 36) BAR, BOOM STOP (IN ITEM 36) DRAWING, INSTR. BOOM STOP (IN ITEM 36) DRAWING, INSTR. FRAME RAIL (IN ITEM 36) DECAL, WARNING PRESSURE (IN ITEM 36) WASHER, WHEEL WEIGHT (IN ITEM 36) ROD, ALL THREAD (IN ITEM 36) DRAWING, INSTR. WHEEL WEIGHT (IN ITEM 36) JOYSTICK CONSOLE ASY (IN ITEM 36) MANUAL, EMI INDUSTRIAL (IN ITEM 36) DECAL, WATCH YOUR STEP (IN ITEM 36) 5JRC LOCKNUT (IN ITEM 36) PAINT, SPRAY CAN (IN ITEM 36) TIE ROD LUG (IN ITEM 36) 2018 Alamo Group Inc. Parts Section -149

155 PISTON PUMP - PISTON CCW 3.0 CID HYSTAT (PART 1)- PN A 2018 Alamo Group Inc. Parts Section -150

156 PISTON PUMP - PISTON CCW 3.0 CID HYSTAT (PART 1)- PN A Continued NUT, JAM RING, RETAINING RING, RETAINING WASHER, SEAL SCREW, CAP ROTATING KIT, SUBASSY SERVO PISTON SUBASSY FOLLOWER, SERVO PISTON PLATE, COVER GASKET, COVER PLATE GASKET, HOUSING PLATE, COVER CAMPLATE, SUBASSY RACE, THRUST BEARING, THRUST RELIEF VALVE SUBASSY O-RING.116 DIA X.924INSIDE SCREW, CAP SCREW, CAP PLATE, VALVE HOUSING SUBASSY HOUSING BEARING (PRESS FIT) PLUG, SUBASY O-RING.064 DIA X.239INSIDE ** CRADLE, SUB-ASY DOWEL BUSHING BUSHING, CRADLE ** CAP SCREW, BUTTON HEAD CAP SCREW SEAL SUBASY BACKPLATE SUBASSY BEARING, PRESS FIT ROLL PIN KIT, COVER PLATE FOR SAE A O-RING SCREW CAP PLATE, COVER O-RING MOLDED WASHER 2018 Alamo Group Inc. Parts Section -151

157 PISTON PUMP - PISTON CCW 3.0 CID HYSTAT (PART 2)- PN A 2018 Alamo Group Inc. Parts Section -152

158 PISTON PUMP - PISTON CCW 3.0 CID HYSTAT (PART 2)- PN A Continued PLUG, SUBASSY O-RING.087 DIA X.644INSIDE PLUG, SUBASSY O-RING.116 DIA X.924INSIDE KEY SEAL PUMP SHAFT CHARGE PUMP ASSEMBLY BUSHING, PRESS FIT W/11 TOOTH PLUG O-RING SHIM (1)NOTE: MAY REQUIRE MORE SPRING POPPET RING, GEROTER, INNER RING, GEROTER, OUTER ORIFICE, CONTROL VALVE COUPLER RING, RETAINING PLUG SUBASSY WASHER WASHER WASHER RING LOCK CARTRIDGE SOL VLV 3-WAY 2-POS COIL 12VDC (ROUNDED) KIT,SOLENOID SERVO CONTROL SEAL KIT - PUMP SHAFT, PISTON PUMP 2018 Alamo Group Inc. Parts Section -153

159 TIMBERCAT - HEAD ASY (PART 1) 2018 Alamo Group Inc. Parts Section -154

160 TIMBERCAT - HEAD ASY (PART 1) Continued TIMBERCAT HEAD ASY, 5 FT TIMBERCAT HEAD ASY, 7 FT BOTTOM BLADE, 5 FT BOTTOM BLADE, 7 FT TOP BLADE, 5 FT TOP BLADE, 7 FT SLIDE BEARING, 5 FT SLIDE BEARING, 7 FT FRONT COVER, 5 FT FRONT COVER, 7 FT BOLT BOLT, 5 FT BOLT, 7 FT BUSHING, 5 FT BUSHING, 7 FT WASHER, 5 FT WASHER, 7 FT LOCKNUT, 5 FT LOCKNUT, 7 FT GREASE FITTING, 5 FT GREASE FITTING, 7 FT TIMBERCAT FRAME BOLT LOCKWASHER VALVE MOUNT FRAME BOLT LOCKWASHER INVERSION VALVE BOLT LOCKNUT CYLINDER ASY PIN COTTER PIN WASHER CYLINDER MOUNT BOLT SPRING ADJUSTING BOLT NUT LOCKNUT JAMNUT 2018 Alamo Group Inc. Parts Section -155

161 TIMBERCAT - HEAD ASY (PART 2) 2018 Alamo Group Inc. Parts Section -156

162 TIMBERCAT - HEAD ASY (PART 2) Continued COVER HITCH POST, F/ MACHETE BOLT PIN WASHER LOCKNUT COTTER PIN PIN BOLT SELF TAPPING SCREW WASHER PIN BUSHING MANIFOLD BLOCK MANIFOLD BRACKET BOLT WASHER NUT BOLT LOCKWASHER ADAPTER, 90? ADAPTER, STRAIGHT PLUG ADAPTER, STRAIGHT ADAPTER, 90? RELIEF VALVE ADAPTER, REDUCER HOSE HOSE BOLT HOSE - W/ RED TIE HOSE - W/ BLUE TIE HOSE - W/ ORANGE TIE SLEEVING (NOT SHOWN) PLUG HOSE BRACKET PLASTIC TIE HOSE SLEEVING 2018 Alamo Group Inc. Parts Section -157

163 VALVE - PARTS - OPEN & CLOSED CENTER VALVE ASY, CCLS VALVE ASY, OCFD ELECTRIC MODULE, DOOR & TILT ELECTRIC MODULE, SWING LIFT & DIPPER SEAL KIT, MODULE TO VALVE SECTION HANDLE MODULE SEAL KIT, HANDLE TO VALVE SECTION CONNECTOR GASKET VALVE ASY KIT (W/ TIE BOLTS & SEAL) RELIEF VALVE, 2755 PSI RELIEF VALVE, 2030 PSI BOLT 2018 Alamo Group Inc. Parts Section -158

164 VALVE - PARTS - OPEN & CLOSED CENTER Continued RELIEF VALVE SECTION ASY, SWING, LIFT OR DIPPER SECTION ASY, TILT SECTION ASY, DOOR SPOOL, SWING OR DOOR SPOOL, LIFT SPOOL, DIPPER SPOOL, TILT SECTION, INLET (CCLS) SECTION, INLET (OCFD) SECTION, END CAP 2018 Alamo Group Inc. Parts Section -159

165 VALVE ASY - 5 SPOOL (CCLS) 2018 Alamo Group Inc. Parts Section -160

166 VALVE ASY - 5 SPOOL (CCLS) Continued VALVE ASY, 5 SPOOL (LOAD SENSE) VALVE, 5 SPOOL ADAPTER, STRAIGHT ADAPTER, ELBOW, 90 DEG ADAPTER, STRAIGHT ADAPTER, STRAIGHT ADAPTER, STRAIGHT ADAPTER, STRAIGHT ADAPTER, ELBOW, 90 DEG ADAPTER, STRAIGHT ORIFICE, ORIFICE, ORIFICE, A 1 SOLENOID LOCK VALVE ASY CAP, PLASTIC (OUTER) CAP, PLASTIC (OUTER) ADAPTER, STRAIGHT ADAPTER, ELBOW ORIFICE, ADAPTER, ELBOW 2018 Alamo Group Inc. Parts Section -161

167 VALVE ASY - 5 SPOOL (OCFD) 2018 Alamo Group Inc. Parts Section -162

168 VALVE ASY - 5 SPOOL (OCFD) Continued VALVE ASY, 5 SPOOL (OCFD) VALVE ONLY, 5 SPOOL ADAPTER, STRAIGHT ADAPTER, ELBOW 45 DEG ADAPTER, STRAIGHT ADAPTER, STRAIGHT ADAPTER, STRAIGHT ADAPTER, STRAIGHT ADAPTER, ELBOW 90 DEG ADAPTER, STRAIGHT ORIFICE, ORIFICE, ORIFICE, A 1 SOLENOID LOCK VALVE ASY CAP, PLASTIC, OUTER CAP PLASTIC ADAPTER, STRAIGHT ADAPTER, ELBOW 2018 Alamo Group Inc. Parts Section -163

169

170 TO THE OWNER/OPERATOR/DEALER To keep your implement running efficiently and safely, read your manuals thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT ( Subpart C) makes these minimum safety requirements of tractor operators: REQUIRED OF THE OWNER 1. Provide a Roll-Over-Protective Structure that meets the requirements of this standard. 2. Provide seat belts that meet the requirements of this paragraph of this standard and SAE J4C. 3. Ensure that each employee uses such seat belt while the tractor is moving. 4. Ensure that each employee tightens the seat belt sufficiently to confine the employee to the protected area provided by the ROPS. REQUIRED OF THE OPERATOR 1. Securely fasten seat belt if the tractor has a ROPS. 2. Where possible, avoid operating the tractor near ditches, embankments, and holes. 3. Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces. 4. Stay off slopes too steep for safe operation. 5. Watch where you are going, especially at row ends, on roads, and around trees. 6. Do not permit others to ride. 7. Operate the tractor smoothly, no jerky turns, starts, or stops. 8. Hitch only to the draw bar and hitch points recommended by the tractor manufacturer. 9. When the tractor is stopped, set brakes securely and use park lock, if available. Keep children away from danger all day, every day... Equip tractors with rollover protection (ROPS) and keep all machinery guards in place... Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens.

171 ALAMO INDUSTRIAL Limited Warranty 1. Limited Warranties Alamo industrial warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser ( purchaser ) and warrants for six months to the original commercial or industrial purchaser ( purchaser ) that the goods purchased are free from defects in material or workmanship Manufacturer will replace for the purchaser any part or parts found, upon examination at one of its factories, to be defective under normal use and service due to defects in material or workmanship This limited warranty does not apply to any part of the goods which has been subjected to improper or abnormal use, negligence, alteration, modification, or accident, damaged due to lack of maintenance or use of wrong fuel, oil, or lubricants, or which has served its normal life. This limited warranty does not apply to any part of any internal combustion engine, or expendable items such as blades, shields, guards, or pneumatic tires except as specifically found in your operator s manual Except as provided herein, no employee, agent, dealer, or other person is authorized to give any warranties of any nature on behalf of manufacturer. 2. Remedies And Procedures This limited warranty is not effective unless the purchaser returns the registration and warranty form to manufacturer within 30 days of purchase Purchaser claims must be made in writing to the authorized dealer ( dealer ) from whom purchaser purchased the goods or an approved authorized dealer ( dealer ) within 30 days after purchaser learns of the facts on which the claim is based Purchaser is responsible for returning the goods in question to the dealer If after examining the goods and/or parts in question, manufacturer finds them to be defective under normal use and service due to defects in material or workmanship, manufacturer will: (A) repair or replace the defective goods or part(s) or (B) reimburse purchaser for the cost of the part(s) and reasonable labor charges (as determined by manufacturer) if purchaser paid for the repair and/or replacement prior to the final determination of applicability of the warranty by manufacturer. The choice of remedy shall belong to manufacturer Purchaser is responsible for any labor charges exceeding a reasonable amount as determined by manufacturer and for returning the goods to the dealer, whether or not the claim is approved. Purchaser is responsible for the transportation cost for the goods or part(s) from the dealer to the designated factory. 3. Limitation Of Liability Manufacturer disclaims any express (except as set forth herein) and implied warranties with respect to the goods including, but not limited to, merchantability and fitness for a particular purpose Manufacturer makes no warranty as to the design, capability, capacity, or suitability for use of the goods Except as provided herein, manufacturer shall have no liability or responsibility to purchaser or any other person or entity with respect to any liability, loss, or damage caused or alleged to be caused directly or indirectly by the goods including, but not limited to, any indirect, special, consequential, or incidental damages resulting from the use or operation of the goods or any breach of this warranty. Not withstanding the above limitations and warranties, manufacturer s liability hereunder for damages incurred by purchaser or others shall not exceed the price of the goods No action arising out of any claimed breach of this warranty or transactions under this warranty may be brought more than two (2) years after the cause of action has occurred. 4. Miscellaneous Proper venue for any lawsuits arising from or related to this limited warranty shall be only in Guadalupe county, Texas Manufacturer may waive compliance with any of the terms of this limited warranty, but no waiver of any terms shall be deemed to be a waiver of any other term If any provision of this limited warranty shall violate any applicable law and is held to be unenforceable, then the invalidity of such provision shall not invalidate any other provisions herein Applicable law may provide rights and benefits to purchaser in addition to those provided herein. Keep for your records Attention: Purchaser should fill in the blanks below for his reference when buying repair parts and/or for proper machine identification when applying for warranty. Alamo Industrial Implement Model Serial Number Date Purchased Dealer Attention: Read your operator s manual ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas

172

173 1502 E. Walnut St. Seguin, Texas Sales and Marketing Tel Fax Warranty Registration/Claims Return Authorizations Online Part Orders Techical Information Tel Fax Machete 17, 21 & 24 Boom Parts Manual (PUB 04-04) P/N P