MV2-DT MV3-D2 MV3-RDP3 MV5-DT
|
|
|
- Rosalind Williamson
- 5 years ago
- Views:
Transcription
1 Manifold Valves
2 TM MV2-RF1 142 MV2-RF2 142 MV2-RF3 142 MV2-RF4 143 MV2-RMF 143 INDEX 139 MV2-RFM 143 MV2-D1 144 MV2-DT 144 MV3-R 144 MV3-RV1 145 MV3-RV2 145 MV3-D1 145 MV3-D2 146 MV3-DT 146 MV3-DH 146 MV3-RDP1 147 MV3-RDP2 147 MV3-RDP3 147 MV5-R1 148 MV5-R2 148 MV5-D1 148 MV5-D2 149 MV5-DT 149 MV5-DH 149 MV5-DDP 150
3 F-Line 140 TM Features 2 VALVE MANIFOLD - REMOTE MOUNTING These manifolds are having one isolating valve of 1/2 connection & one dain valve of 1/4 or 1/2 connection. The outlet of drain valve can be used for calibration. Compact unit saves space, reduces number of joints resulting in costn reduction. These manifold are used with pressure gauges, switches or trasmiitters. Different models are available as shown below. 2 VALVE MANIFOLD - DIRECT MOUNTING These manifolds provide a direct mounting feature with isolation & drain/calibration in a single unit. These type of manifolds can be directly mounted on the static pressure transmitter to eliminate several parts & joints. Different models available as shown below. 3 VALVE MANIFOLD - REMOTE MOUNTING These manifolds are generally used in differential pressure application with pressure gauges, pressure switches & pressure transmitters. Two isolation & one equililizing valve is provided. The standard connections are 1/2 NPTF. The drain connection of 1/4 NPT is provided as an option. The different models are available as mentioned below. 3 VALVE MANIFOLD - DIRECT MOUNTING These manifolds can be directly mounted on the transmitter having 54 mm or 32 mm center to center connection. The inlet is either 1/2 NPT F or flanged. Two isolation valves & one equilizer valve is provided along with the 1/4 NPT F drain as an option. These valves are mainly used with Dp transmitter. Different options are available as shown. 5 VALVE MANIFOLD - REMOTE MOUNTING These manifolds are designed for remote mounting on instruments using threaded instrument & process connections. These valves are having two isolation, one equilizer & two drain/calibration valves. The standard process & instruments connections are 1/2 NPT F & the drain connections are 1/4 NPT F. The blanking plugs are provided. The instruments connections are positioned at 54 mm center distance but can also be used for other center distances with the help of screwed fittings. Different models are available as shown below. 5 VALVE MANIFOLD - DIRECT MOUNTING These valves are designed for direct mounting to differential pressure transmitter. The instrument side is provided with a standard flange of 54 mm or 32 mm center distance. These valves are having two isolation, one equilizer & two vent/calibration valves. The standard process & instruments connections are 1/2 NPT. Two vent connections are 1/4 NPT in all manifolds & provided with blanking plugs. Different options are available as shown.
4 TM Technical data Code Maximum Working Pressure Maximum Temperature Material Gland Packing Standard Process Connection Standard Instrument Connection Drain MV2-RF1 MV2-RF2 MV2-RF3 MV2-RF4 MV2-RMF MV2-RFM MV2-D1 MV2-DT MV3-R MV3-RV1 MV3-RV2 MV3-D1 MV3-D2 MV3-DT MV3-DH MV3-RDP1 413bar 6000PSI 413bar 6000PSI 413bar 6000PSI 413bar 6000PSI 240 C Stainless Steel PTFE 1/2 NPT 1/2 NPT 1/4 NPT 240 C Stainless Steel PTFE 1/2 NPT Flanged 1/4 NPT 240 C Stainless Steel PTFE 1/2 NPT 1/2 NPT 1/4 NPT 240 C Stainless Steel PTFE 1/2 NPT Flanged Flanged 1/4 NPT MV3-RDP2 1/4 NPT MV3-RDP3 1/2 G or NPT 1/2 G or NPT 1/2 G swivel MV5-R1 413bar MV5-R2 6000PSI 240 C Stainless Steel PTFE 1/2 NPT 1/2 NPT 1/4 NPT MV5-D1 1/2 NPT Flanged MV5-D2 1/2 NPT Flanged MV5-DT 413bar 1/2 NPT Flanged 240 C Stainless Steel PTFE MV5-DH 6000PSI Flanged Flanged 1/4 NPT MV5-DDP 1/2 G or NPT*9 Swivel nut G1/2 141
5 F-Line TM 2 Valve manifold - Remote mounting MV2-RF2 2 Valve manifold - Remote mounting MV2-RF3 2 Valve manifold - Remote mounting MV2-RF1 142
6 TM MV2-RF4 2 Valve manifold - Remote mounting 143 MV2-RMF 2 Valve manifold - Direct mounting MV2-RFM 2 Valve manifold - Direct mounting
7 F-Line TM 2 Valve manifold - Direct mounting MV2-DT 2 Valve manifold - Direct mounting MV3-R 3 Valve manifold - Remote mounting MV2-D1 144
8 TM MV3-RV1 3 Valve manifold - Remote mounting 145 MV3-RV2 3 Valve manifold - Remote mounting MV3-D1 3 Valve manifold - Direct mounting
9 F-Line TM 3 Valve manifold - Direct mounting MV3-DT 3 Valve manifold - Direct mounting MV3-DH 3 Valve manifold - Direct mounting MV3-D2 146
10 TM MV3-RDP1 3 Valve manifold - Special Manifold for DP Gauges 147 MV3-RPD2 3 Valve manifold - Special Manifold for DP Gauges MV3-RDP3 3 Valve manifold - Special Manifold for DP Gauges
11 F-Line TM 5 Valve manifold - Remote mounting MV5-R2 5 Valve manifold - Remote mounting MV5-D1 5 Valve manifold - Direct mounting MV5-R1 148
12 TM MV5-D2 5 Valve manifold - Direct mounting 149 MV5-DT 5 Valve manifold - Direct mounting MV5-DH 5 Valve manifold - Direct mounting
13 F-Line TM MV5-DDP Valve manifold - Direct mounting
Static Pressure Manifolds M25, M25A, M25B, M251 and M251B
Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,
Anderson Greenwood M24A/M24T Differential Pressure Manifolds
Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
Anderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
Recognized globally for our quality, service and the ability to deliver! ISO 9001:
Recognized globally for our quality, service and the ability to deliver! ISO 9001:2008 www.mac-weld.com MACHINING LTD. CONTENTS Introduction Page 1-2 2 Valve Manifolds Page 3-4 3 Valve Manifolds Page 5-7
MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Pressures to 10,000 psi (690 bar)
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev NB January Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
Anderson Greenwood Instrumentation Products - Manifolds and Accessories
Anderson Greenwood Instrumentation Products - Manifolds and Accessories Total Flow Control Solutions Flow, Static Pressure and Liquid Level Manifolds Flow Control ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS
Solution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Manifold & Gauge & Rising Plug Valves 2 Manifold
Monoflanges. Page 1. Rev. 0-0
Monoflanges Page 1 Rev. 0-0 2016 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to
Manifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev LA Catalog Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
Instrumentation Products Soft Seated Needle Valves and Manifolds
Instrumentation Products Soft Seated Needle Valves and Manifolds Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World's Leading Manufacturers of Instrumentation
Rosemount Manifolds. Product Data Sheet October , Rev PB. Factory assembled, leak-tested, and calibrated
Product Data Sheet October 2014 00813-0100-4733, Rev PB Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
ORIMAS Mass Flowmeter
Typical Applications ORIMAS Mass Flowmeter The ORIMAS mass flow meters measure the mass flow of most liquids and gases within the process industries, including chemical, petro-chemical, pharmaceutical
Valves and manifolds
Process industry We offer a wide range of accessories for various applications Stopcocks DIN valves Ball valves Bonnet version needle valves are available in various options, materials and connections.
Page 1 Worldwide Rev e
Worldwide Page 1 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent galling
Valves. Model Code Breakdown. Valves. Steel High Pressure Steel Ball Valves. Steel High Pressure Steel Ball Valves
Steel Ball Steel Ball Model Code Breakdown AB2 N1-1/2 _ 1 1 D B Valve Series Connection Type/Size N NPTF Pipe Thread S SAE Straight Thread Adapter & Stem Seals B Buna - Standard V Viton Bore Restriction
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev MA August Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
Moduflow. ILP and RFP Low Pressure Filters. Series
Moduflow ILP and RFP Low Pressure Filters Series 27 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile
Rosemount Manifolds. Product Data Sheet September , Rev PA. Factory assembled, leak-tested, and calibrated
Product Data Sheet September 2014 00813-0100-4733, Rev PA Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
JUMO flowtrans DP R. Meter run R01 and orifice plate R02. Applications. Brief description. Special features. Customer benefits.
Page 1/8 JUMO flowtrans DP R and orifice plate R02 Applications For the flow measurement of single-phase aggressive and non-aggressive gases, steam, and liquids In nominal widths up to DN 40 designed as
Recognized globally for our quality, service and the ability to deliver! ISO 9001: Quality Service Experience
Recognized globally for our quality, service and the ability to deliver! ISO 9001:2008 Quality Service Experience www.mac-weld.com CONTENTS Introduction Page 1-2 Needle Valves Page 3-6 Gauge Valves Page
NEEDLE VALVE GAUGE VALVE VALVE MANIFOLD BALL VALVE ACCESSORIES
NEEDLE VLVE GUGE VLVE VLVE MNIFOLD BLL VLVE CCESSORIES Index Introduction ----------------------------- Valve Manifold VM0 ---------- Product Feature ----------------------- Valve Manifold VM0 ----------6
ANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
Section NV-1. Non-Leveling Track Frame - Frame and Covers. Non-Leveling Track Frame - Frame and Covers
Section NV-1 Non-Leveling Track Frame - Frame and Covers Non-Leveling Track Frame - Frame and Covers Last Updated - 09/2008 Non-Leveling Track Frame - Frame and Covers NV-1-1 Non-Leveling Track Frame -
PATENT NO.:ZL / ZL
Instrument Valve PATENT NO.:ZL92214460.5/ ZL98229671.1 Sichuan Changyi Oil and Gas Gathering Transportation Equipment Company (Hereinafter called Sichuan Changyi ) owns more than 20 years of experience
Anderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
Static Pressure Manifolds M4AP and M4TP Manifolds
Static Pressure Manifolds M4AP and M4TP Manifolds Product Overview The M4AP and M4TP are block and bleed, static pressure manifolds. They are designed for use with DP-style pressure transmitters. The manifold
P3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD
P3M5S, P4M5S, P6M5S 5-VALVE MANIFOLD GAS STYLE MANIFOLD 5-Valve Gas Style Manifold The 5-valve manifold features 2 isolation valves, 2 equalizer valves and 1 vent valve in a single body for isolation and
Purge Adapters. The Solution to Isolate the Process. Flow, Level and Pressure Applications: Product Features: Contact Information:
Purge Adapters The Solution to Isolate the Process Flow, Level and Pressure Applications: Parker s Purge Adapters are used where the sensing lines need a constant purge to prevent plugging, and where the
WESTERN FILTER. High Performance Filtration Systems. Spin-ons Intank Low Pressure Medium Pressure High Pressure Duplex
WESTERN FILTER High Performance Filtration Systems Spin-ons Intank Low Pressure Medium Pressure High Pressure Duplex www.westernfilter.com Element Pak Offering* P R-P-W R-P-W R-P-W Max Flow GPM 10 20 30
INSTRUMENT MANIFOLDS Reliable solutions for high requirement applications
M800 INSTRUMENT MANIFOLDS Reliable solutions for high requirement applications Ordering Information MPR - C G - Model (connection to instrument) MPR: 1/2 NPT threaded MP: 1/2 NPT flange connector Connection
Anderson Greenwood PTM/PT7 Static Pressure Manifolds
m o Anderson Greenwood PTM/PT7 Static Pressure Manifolds Two valve calibration manifolds with a choice of metal and soft seats for static pressures up to 6000 psig (414 barg) PT7 PTM Features Cost savings
Sami Sami Instruments Instruments srl srl Instrumentation products Valves and manifolds 2008 Page 1 Contents Introduction Page 3 Standard Features Page 4 Coding system Page 5 Valves Page 8 ACCESSORI /
INTRODUCTION AND STANDARD SPECIFICATIONS
INTRODUCTION AND STANDARD SPECIFICATIONS INTRODUCTION Instrument valves and manifolds are often used on general applications for liquid and gas service and are suitable for shutting-off impulse lines to
Modular Instrumentation System
www.swagelok.com Modular nstrumentation System Kenmac Series Modular 85 System Provides a standard modular instrumentation interface and mounting system: 2- and 4- valve pressure and differential pressure
LEVEL CONTROL SWITCHES
The LINC-282 & LINC-282SC Series: Snap Acting, Non-Bleed Pneumatic Level Control Switches Application: These units are used as a level control or as a high or low level alarm. The pneumatic output can
Overview Brochure. Multi Instruments, Edisonweg 1, 4207HE Gorinchem, The Netherlands
Overview Brochure Contact details Multi Instruments: Phone: +31 (0)183 62 88 88 Fax.: +31 (0)183 62 81 82 E-mail: Instrumentation@multi- Homepage: www.multi- http://www.multi http://www.multi-- MI/AP revision
ANDERSON GREENWOOD LARGE BORE INTELLIMOUNT SYSTEM
Large bore direct mount 2, 3 or 5 valve manifold system with renewable block valve metal or soft seats and graphite or PTFE stem packings that reduces potential leakpoints FEATURES Close coupled straight
Manifold & Gauge Valves I [
Instrument High Technology Valve, Flange & Fitting Series Manifold & Gauge Valves I [ Instrument Manifolds Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle
Instrument Manifolds. V, VB, and VL Series. 2-, 3-, and 5-valve instrument manifolds
www.swagelok.com Manifolds V, VB, and VL Series 2-, 3-, and 5- instrument manifolds All 316 stainless steel construction with PTFE packing Working pressures up to 6000 psig (413 bar) Temperatures up to
Rosemount Manifolds. Product Data Sheet April , Rev PC. Factory assembled, leak-tested, and calibrated
Product Data Sheet pril 2015 00813-0100-4733, Rev PC Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs Integral
Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51
Valves and protective devices Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51 WIKA data sheet AC 09.23 Applications Shut-off, pressure
Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
Rosemount 4088 MultiVariable Transmitter
Product Data Sheet May 2015 00813-0100-4088, Rev AC Rosemount 4088 MultiVariable Transmitter With the innovative Rosemount 4088 MultiVariable Transmitter, you can maximize your measurement accuracy and
T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
ABB measurement & analytics data sheet. Model M26 Manifold line for 266 pressure transmitters
ABB measurement & analytics data sheet Model M26 Manifold line for 266 pressure transmitters Measurement made easy Engineered solutions for all applications 2 M 26 M a n ifol d li n e for 26 6 p r ess
IFOA Integral Flow Orifice Assembly
Instruction MI 022-333 July 2007 Introduction IFOA Integral Flow Orifice Assembly The IFOA integral flow orifice assembly is used in conjunction with a Foxboro electronic or pneumatic differential pressure
PROCHEM Stainless Steel Specialists
PROCHEM Stainless Steel Specialists Product solutions for a world of difference INSTRUMENTATION AGCO PIPING PRODUCTS INSTRUMENTATION VALVES AND ACTUATORS MANUFACTURING INDENT SERVICE HYDRAULIC ANDERSON
Anderson Greenwood M25/M251 Block and Bleed Gauge Valves
Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit Features General application These valves enable gauges, pressure transmitters or
Step One: Select Stabilized Connector
Step One: Select [ ] STEP ONE Starting from your orifice fitting or flange, the first item required for DMS is the. The provides the foundation for your DMS and you must select the proper model for your
The model M Valve Manifold is designed for direct mounting the manifold and transmitter together in a convenient and accessible location.
200 Series M-220 & M-222 2-Valve Manifolds The model M-220 2-Valve Manifold is designed for remote mounting of a static or gauge transmitter. This design permits the user to mount each unit separately
Rosemount 3051S Electronic Remote Sensor (ERS) System
Rosemount 3051S Electronic Remote Sensor (ERS) System The Rosemount 3051S ERS System is a flexible, 2-wire 4-20 ma ART architecture that calculates differential pressure (DP) electronically using two pressure
Kerotest KM4AP & KM4TP Static Pressure Manifolds
Kerotest KM4AP & KM4TP Static Pressure Manifolds KM4AP KM4TP Product Brief The KM4AP and KM4TP are two-valve, block and bleed style manifolds. These manifolds are intended for static pressure applications
Instrumentation Products Monoflanges & VariAS-Blocks
Instrumentation Products Monoflanges & VariAS-Blocks Introduction Introduction The AS-Schneider Monoflanges and VariAS- Blocks are designed to overcome the problems of traditional assemblies on primary
Differential Pressure Gauges (701P Series)
Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure
Instrumentation Products Modular Mounting System
Instrumentation Products Modular Mounting System Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation Valves
TEK-B AR 3110A. Differential Pressure Transmitter. Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys PRESSURE
Technology Solutions TEK-B AR 3110A Differential Pressure Transmitter PRESSURE www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction The Tek-Bar 3110A Differential
Product presentation SITRANS P310
Product presentation SITRANS P310 Unrestricted / Siemens 2016. All Rights Reserved. usa.siemens.com/pressure SITRANS P family Page 2 SITRANS P pressure transmitter Single range transmitters for general
Instrumentation Manifolds Traditional C13WT series. For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters
Instrumentation Manifolds Traditional C13WT series For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters Introduction About Yokogawa and WIKA About the catalogue Yokogawa and WIKA have
General Specifications
General Specifications Manifolds for DPHarp EJA and EJX Pressure and Differential Pressure Transmitters Yokogawa Europe bv has included Sami Instruments manifolds in his DPHarp pressure and differential
Lube Level Maintainer
Lube Level Maintainer Models LM500/LM500-TF Installation Instructions 00-02-0729 2015-05-30 Section 15 BEFORE INSTALLING THIS MURPHY PRODUCT: A visual inspection of this product for damage during shipping
Block-and-bleed valve 2-valve manifold Models IV20 and IV21
Valves and protective devices Block-and-bleed valve 2-valve manifold Models IV20 and IV21 WIKA data sheet AC 09.19 Applications Shut off and vent pressure measuring instruments For gaseous and liquid aggressive
FCU Floor Control Unit
Fully assembled with integrated M3V Control Group including mixing valve and circulating pump and in-line high and low temperature Topway T2 FM manifold options with high and low temperature manifold options
Rosemount 1195 Integral Orifice Primary Element
September 2014 Rosemount DP Flow Rosemount 1195 Integral Orifice Primary Element Rosemount 1195 Integral Orifice Primary Element utilizes a self centering orifice plate design to eliminate installation
Instrument Valves and Manifolds
Instrument Valves and Manifolds Needle Valves Instrument Valve Orifice Block Valves Gauge Block Valves Block & Bleed Valves Integral Block & Bleed Valves Two Valve Manifolds Three Valve Manifolds Five
L D FB DEVICES FIELDBUS PRESSURE TRANSMITTERS. Features 0 ~125 Pa to 0 ~ 40 MPa. (0 ~0.5 inh 2
L D 3 0 2 FIELDBUS PRESSURE TRANSMITTERS FB DEVICES Features 0 ~125 Pa to 0 ~ 40 MPa. (0 ~0.5 inh 2 0 to 0 ~ 500 psi). 0.075% accuracy of the calibrated range. Accepts calibration from URL to URL/120.
Instrumentation Products Overview. Flow Control
Instrumentation Products Overview Flow Control World Leading Instrument Valve Solutions Century Valve is the number one choice for Instrument Valves and Manifolds; number one for range of products and
Hydraulic Motor Model BMH
APPENDIX HYDRAUIC MTRS HYDRAUIC PUMPS GAUGES & ACCESSRIES UID CMPNENTS, INC. Hydraulic Motor Model BMH The BMH series advanced RRTRC gear set, shaft distribution flow, hydraulic motor is a compact, low
)SLIM LINE) MONOFLANGE VALVES
)SLIM LINE) MONOFLANGE VALVES OVERVIEW The ASTAVA monoflange range is designed to seamlessly connect process piping to instrumentation. By offering a primary isolate bonnet, our line of monoflanges are
Centro-Matic Automatic Lubrication Systems FlowMaster Hydraulic Pump
FlowMaster Hydraulic Pump High-performance FlowMaster hydraulic pumps combine rotary-driven pump motors with reciprocating pump tubes and flexible control features that perform in desert heat and arctic
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS INSTRUMENT VALVES PRODUCT OVERVIEW
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS INSTRUMENT VALVES PRODUCT OVERVIEW ISSUED NOVEMBER 2012 Leading Instrument Valve Solutions Anderson Greenwood Instrumentation is your best choice for Instrument
Instrument Manifold Systems
www.swagelok.com Instrument Manifold Systems Instrument, Direct, and Remote-Mount Manifolds and Modular Systems V, VB, and VL series 2-, 3-, and 5- instrument manifolds VE series 2-, 3-, and 5- direct-mount
Rosemount 4088 MultiVariable Transmitter
Product Data Sheet January 2018 00813-0100-4088, Rev BA Rosemount 4088 MultiVariable Transmitter With the innovative Rosemount 4088 MultiVariable Transmitter, you can maximize your measurement accuracy
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
Model 3051 Sensor Module Replacement
Model 3051 Sensor Module Replacement 00809-0400-4001 English Rev. BA SAFETY MESSAGES Procedures and instructions in this manual may require special precautions to ensure the safety of the personnel performing
Rosemount DP Level Transmitters and 1199 Diaphragm Seal Systems
Rosemount DP Level Transmitters and 1199 Diaphragm Seal Systems Product Data Sheet December 2017 00813-0100-4016, Rev RF Applications Level, flow, pressure, interface, density Extreme hot and cold temperatures
Rosemount DP Flowmeters and Primary Elements
meters and Primary Elements Multivariable capabilities allow for real time fully compensated mass and energy flow Fully-Integrated Wireless Flowmeters allow for easy installation Minimize permanent pressure
Instrumentation Manifold Valves
www.korlok.com Instrumentation Manifold s 1 2 3 4 11 12 Manifold s 2- Manifold 2- Manifold Kor-Lok 2- Manifolds offer safety and reliability in a general purpose design. The simple 2- configuration allows
PRECISIONISO 9001:2008
SUSTECH PRECISIONISO 9001:2008 Direct Mount Manifolds L Series Rated up to 10 000 psi Compact design Ease of use www.sustech.com sales@sustech.com l +27 11 452-9545 Contents Manifolds and Accessories Manifold
60 SCFM Model # A B C D 3C-060-M04-P, Manual Drain C-060-M04-F, Float Drain C-060-M04-Fi, Float Drain w/indicator
Model # A B C D 3C-020-M02-P, Manual Drain 3.0 6.8 3.0 1.5 3C-020-M02-F, Float Drain 3.0 6.8 3.0 1.5 3C-020-M02-Fi, Float Drain w/indicator 3.0 7.5 3.0 1.5 3C-020-P02-P Poly Bowl, Manual Drain 3.0 6.8
General Specifications
General Specifications GS 22B01C06-01EN-A C13ST Manifolds for Traditional Mount Differential Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-3 and C13ST-5 manifolds are
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky
Lube Level Maintainer
Lube Level Maintainer Models LM2000/LM2000S Installation Instructions 00-02-0423 Revised 08-12-09 Section 15 In order to consistently bring you the highest quality, full featured products, we reserve the
Pressure Transmitter
FCO318 Differential Pressure Transmitter Accuracy 0.25% of reading Ultra low pressure measurement Wide span adjustment 2-wire ma, 3-wire or 4-wire voltage output Two configurable relays and bi-colour LED
Meter, PD Series, K12-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, K12-S1, S3, S5, S6 and S7 Bulletin PO01018 Issue/Rev. 0.4 (3/18) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 2 Bulletin PO01018 Issue/Rev. 0.4 (3/18) Item
F L O W M E T E R I N G E Q U I P M E N T Model AR Ellipse Annular Flow Meter Preso s patented elliptical design outperforms and provides greater accuracy than traditional differential pressure flow measurement
Manifold Valves. Important!
Manifold Valves mar Manifold Valves use the high-pressure needle valve, with a non-rotating tip. Therefore, the galling of the tip in seat is eliminated. It solves the main leaking problem found in rotating
TRANSMITTER ATTACHES TO THIS SURFACE
FIELD DEVICES - PRESSURE Product Specifications Logo PSS 3-5A1 B Model IFOA Integral Flow Orifice Assembly Used with I/A Series or Pneumatic d/p Cell Transmitters PNEUMATIC TRANSMITTER TRANSMITTER ATTACHES
413 barg 38 C 200 barg 230 C psig 100 F 3000 psig 750 F
Model 101 Picture model: 101-06 Standard materials Body, Bonnet, Bellows (101-28) AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections
Pilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
HYDROSTATIC TEST SYSTEM MANUAL
PDQC HYDROSTATIC TEST SYSTEM MANUAL Technical Specification Operating Instructions Part List Revised 12-2016 Manual # PDQC- 6,000 And PDQC-10,000 1 PDQC PERFORMANCE DATA Model Number Maximum Pressure Volume