High Current Connector
|
|
|
- Alfred Turner
- 5 years ago
- Views:
Transcription
1 High Current Connector Series 1U Nov Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Features 1. Power contact supports up to 10 mps (210/1pin Derating curve, ambient temp 2 C) with 0mm sq. O/I WG wire. 2. The unique blade contacts help to create a slim design and allows it to be utilized in a standard 1U rack size (44.mm 482.6mm). (Fig.1) 3. Special screws are used in the receptacle to allow the floating (±2.0 mm) in X Y axial directions. Connector floating is allowed by using flexible wire without missing flexibility in short distant wiring between 1U connection. (Fig.1, 2) 4. The cable connection to the power contact is made by means of a screw to a JIS round crimp contact.. For added safety, the plug side (battery side) is designed to prevent shock hazard and provides for more user safety and security. (Fig.3) Flexible wire System Side Panel Flexible wire Fig.1 Y X Shoulder Portion Thread Portion Shoulder Screw Fig.2 Test Finger Fig.3 6. special dust cap is available and can be used with both the plug and receptacle. 7. The plug and receptacle have been UL, C-UL and TÜV certified. In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information
2 Series High Current Connector Nov Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Product Specifications Ratings Rated Current pplicable Cable Power 10/1pin*1 210/1pin (Derating curve, ambient temp 2 C) to 1/0 WG 14 to 0sq WL1WL2 *1 *2 Signal 1/1pin 20 to 22 WG Rated Voltage Op. Temp. Range Stor. Temp. Range CDC 1000V*1-40 to +10 C (including temperature rise due to electric current) *1 : UL, C-UL and TÜV certifications have been obtained while changing conditions such as rated current and voltage multiple times. For details, see the "Conditions on Safety Standards (UL, C-UL, TÜV)" on page 6. *2 : Select your cables based on the current capacity needed for your application. Flexible wires are recommended to provide flexibility to the receptacles (system side). *3 : Used 0sq (1/0 WG) cable. Materials / Finish Receptacle Parts Materials Color/Finish Remarks Insulator PBT Black UL94V-0 Contact Copper alloy Silver plated Contact Retention plate PBT Black UL94V-0 Contact Retention plate B PBT Black UL94V-0 Floating screw Steel Nickel plated Signal male contact Copper allay Gold plated Signal Retention plate (12) PBT Black UL94V-0 Signal Retention plate (16) PBT Black UL94V-0 Plug Parts Materials Color/Finish Remarks Insulator PBT resin Black UL94V-0 Contact Copper alloy Silver plated Contact Retention plate C PBT resin Black UL94V-0 Signal female contact Copper allay Gold plated Signal Retention plate (12) PBT Black UL94V-0 Signal Retention plate (16) PBT Black UL94V-0 Dust Cap Parts Materials Color/Finish Remarks Insulator Silicon rubber Blue UL94HB Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. 1. Connector product name - 2US/ 12 S / 16 S 2. Dust cap product name - 2U- DC Series name symbol No. of power contacts Current capacity of power contact U : 10 Power contact shapes P : Male contact S : Female contact No. of signal contacts Signal contact shapes P : Male contact S : Female contact Dust cap Combination List Signal part for Power/signal hybrid type is GT8E series (sell separately). -2UP/12P/16P -2US/12S/16S GT8E-16DS-HU + GT8E-2022SCF (Gold plated) GT8E-12DS-HU + GT8E-2022SCF (Gold plated) GT8E-16DS-HU + GT8E-2022SCF (Gold plated) GT8E-12DS-HU + GT8E-2022SCF (Gold plated) GT8E-16DS-HU + GT8E-2022SCF (Gold plated) GT8E-12DS-HU + GT8E-2022SCF (Gold plated) (Example) -2UP/12P/16P 2
3 Series High Current Connector (12.7) 14.7 Receptacle -2UP (Power type) Nov Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. -2UP box (40pcs.) -2UP(01) pcs (119.) BDiagram of recommended PCB layout dimensions 2-M Plug -2US (Power type) 7 R M61 2-M (41.8) Ø6.4 M (6) (23.8) (.) (10) (3.8) 43. (12.4) M61 (62.4) 7 R US box (40pcs.) -2US(01) pcs. BDistance between panels ( ) BRecommended panel 2-M
4 Series High Current Connector Receptacle -2UP/12P/16P (Signal hybrid type) 20.7 (193.) (117.2) 1 (12.7) M61 Ø8.2 (.) (6) (10) M61 23 (41.8) (23.8) (62.4) Nov Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. -2UP/12P/16P box (40pcs.) -2UP/12P/16P(01) pcs. BDiagram of recommended PCB layout dimensions 2M Plug -2UP/12P/16P (Signal hybrid type) M6 1 2M (117.2) (3.8) (12.4) Ø6.4-2US/12S/16S box (40pcs.) -2US/12S/16S(01) pcs. BDistance between panels (24.7 to 28.7) BRecommended panel 2 M R2max
5 Series High Current Connector -2U-DC Nov Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. -2U-DC box (40pcs.) This dust cap can be used on both the receptacle and plug. (16) 4R (10) 7.6 (4) (1)
6 Powered by TCPDF ( Series High Current Connector BUsage Precautions M6 screws are used to attach to the panels. The recommended amount of torque used to tighten the screws should be 2. to.2 Nm. The recommended amount of torque used to tighten the screws to the power contacts should be 2. to.2 Nm. Power contacts are silver plated and may react with the sulfide in the atmosphere. This might cause the color to change to a dark brown. The power contacts do not support hot-pluggable, so it cannot be used to shut off the power. BSafety Standards Certifications (UL, C-UL, TÜV) The series has received safety certifications from the UL, C-UL, and TÜV under the conditions provided in Table 1 and Table 2. Conditions for safety standards vary depending on submitted applications of current and voltage ratings. See Table 1 and Table 2. Nov Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Condition Condition Rated Voltage 600V (C/DC) Rated Current Cable Creepage Distance (*2) Clearance (*2) 14 to 22sq (*1) to 3 WG MIN : 3.2mm MIN : 3.2mm 38 to 0sq (*1) 1 to 1/0 WG Condition I Condition II Condition III Rated Voltage (C/DC) 800V 600V 1000V 100 (cable 14 to 22sq, to 3 WG *1) Rated Current 12 (cable 38sq, 1 WG *1) 10 (cable 0sq, 1/0 WG *1) Overvoltage Category II III Contamination Level 3 Creepage Distance (*2) MIN : 12.6mm MIN : 12.6mm MIN : 16mm Clearance (*2) MIN : 6mm MIN : 6mm MIN : 8mm Insulation System Basic insulation (Panel should be grounded) Recommended Panel for -2UP Side Recommended Panel 1 Recommended Panel 1 Recommended Panel 2 (*3) Recommended Panel for Recommended Panel 3-2US Side *1 : Use the screw and crimp contact combination recommended below. The use of other screws and crimp contacts can affect clearance and creepage distance. If you choose to use a different screw/contact combination, be sure to check the measurements for clearance and creepage. Make sure that these conditions will meet the UL, C-UL and TÜV. Recommended screw: JIS B 1188 spring lock washer + cross recessed head screw with captive flat washer M6 12 Recommended crimp contacts Cable 14 sq: JIS C 280 R14-6 Cable 22 sq: JIS C 280 R22-6 Cable 38 sq: NICHIFU R38-6S Cable 0 sq: NICHIFU R60-6S *2 : Subjects of clearance and creepage distance are as follows. Between crimp contacts Between power contact and panel Between crimp contact and panel Between screw (attached to power contact) and panel *3 : In case of recommended panel 2, reverse attachment of receptacle is possible. Please be careful in panel attachment ,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi ,JPN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 02/2017. Contents are subject to change without notice for the purpose of improvements.
High Current Plug-in Connector
High Current Plug-in Connector PS3F Series Front access is best suited to the systems with limited rear access. No working space Overview High current plug-in connector Contributes
High Current, Plastic Power Supply Connectors
High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)
7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
125A High-Current Waterproof Connectors
125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors RM-W Series ssembly type (straight plug/rm5w) 5 Ø.5 Ø.5 Mar..0 Copyright 0 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø Overview
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
Power Supply Connectors For Industrial Equipment
Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (0/
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
GT32 Series Shielded connector for high speed transmission / USB3.0, HDMI For Network, High speed communication
Sep..208 Copyright 208 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. GT32 Series ---- Shielded connector for high speed transmission / USB3.0, HDMI.4 ---- Features Full shielded structure Suitable for
High Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
High Current Connector
High Current Connector PS2 Series and signal contacts together in one unit with dedicated power contacts to handle 100, 200 or 300 Amps. 2. Floating Structure The structure allows up to ±2.5 mm of float
2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
Circular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The
0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
SMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
Waterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41 Series Bayonet Lock Mating Mark Features 1. Waterproof connector designed for outdoor use Light weight, waterproof connector designed to withstand outdoor environments.
0.4 mm Contact Pitch, Board-to-FPC Connectors
0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure Two-point contact system Features 1. Two stacking height options Two separate heights
3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
GT16 Series. Subminiature Connectors for coaxial cables
GT5 Sep.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT16 GT13 GT16 Series Subminiature Connectors for coaxial cables
0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors
.5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached
SMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
For Antenna. In-vehicle shielding connector with twin crimp technology. GT5 Series Connectors for coaxial cables ----
Patented GT In-vehicle shielding connector with twin crimp technology GT6 GT6 GT GT2 GT In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems, RACS antenna
Waterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector FH63 Series Single action lock (Dimension diagram : 30pos.) 2.8mm 21.94mm Features 1. Automatic single
Directory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
Small I/O connectors for AC adapters
Small I/O connectors for C adapters RP34 Series Sep.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Product Specifications Ratings Features 1. Superior mating operability snap-and-lock
1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB
3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
GT11 Series. Connectors for shielded cables. Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT 22 GT 25 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 PO5G GT 16 GT 10 GT 18W GT 9 GT 8 GT 15 GT 13 GT 5 GT11 Series Connectors for shielded cables Features A housing lance systems has been used to
Crimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
2mm pitch, high reliability with lock, board to cable and cable to cable connector
NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet
Waterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Features 1. Waterproof The JR-W series is a rugged, waterproof connector series that is IP67 and IP68 rated in the mated condition. IP67: Left in water at a depth
High Current, High Density, Power Connectors
High Current, High Density, Power Connectors MCN1 Series Features 1. High Current Applications Board-to-board connectors are UL certified for 27 A per contact. 2. Hirose's Unique Compliant Press-fit connection
Miniature Waterproof Plastic Connectors
NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter
Connections of the Various Units and Device Interiors. GT8 Series. High-Pressure Connectors <GT8, GT8A, GT8Z and GT8E>
GT 16 GT 13 GT 5 PO5G GT 11 GT8 Series High-Pressure Connectors GT 22 GT 25 GT 9 GT 8 GT 15 GT 18W GT 10 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 Features Crimp
Miniature push-pull connectors with ground function
Miniature push-pull connectors with ground function MXR Series Jul.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Product Specifications Ratings Rated current Rated voltage Features
Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
Ultra Low-profile Interface Connectors with.0 mm Mounting Height LX Series Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Low profile on the PCB When mounted on the
Shell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
Power Supply Connectors For Industrial Equipment
ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
1.25mm Pitch Super Low profile Crimping Connector
1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height
Powermate Range pitch 7.00 Powermate Range pitch 7.00
Contents lug and socket connectors with leaf spring connection.2 lug and socket connectors with TO connection.6.1 lug and socket connectors with leaf spring connection STVS S Derating curve STVS SB Socket
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
PH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. 2.0mm
Crimp.mm (.") pitch PH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features This is a thin, lowprofile.mm (.") pitch connector.mm (.") in height after mounting and.mm (.1") in width. It
Datasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
FUSEHOLDERS. Type Fuse Size (mm) Page. Type Fuse Size (mm) Page
Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO
Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment
Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment IX Series Contribution to size reduction Compact size 75% reduced size compared to RJ-5 Overview Multi-purpose
2mm Pitch Miniature Connector for HDD
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
High Power/Signal Connectors for Industrial Machinery
NEW High Power/Signal Connectors for Industrial Machinery PQ Series Variations Non water-resistant 20 position type Contact (19 A/pin) type Non water-resistant 48 position type Contact (12.5 A/pin) type
2.54mm Pitch Card Edge Connector
2.54mm Pitch Card Edge Connector CR22 Series Product Standards Rating Current rating: 3A Voltage rating: 0VAC Operating Temperature Range: - to +85ç (Note 1) Operating Humidity Range: 40 to % Storage Temperature
Miniature Relay PT 2 pole 12 A, 3 pole 10 A or 4 pole 6 A DC- or AC-coil
2, 3 or 4 C/O contacts Switching performance up to 3000 VA Relay height 29 mm Cadmium-free contact material Mechanical indicator Manual test tab, optionally lockable. White marking tabs Applications Universal
DISPOSABLE COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES
B10 CHAPTER FISCHER CORE SERIES DISPO COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES Sterilizable (EtO), gamma) Color-coded for easy integration Single or two-piece shell Lightweight and shock resistant
PCB plug-in connectors
Contents CB plug-in connectors.16 mm pitch.16 mm pitch Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 Male connectors with solder connection SU.16H/9 Derating
Features/Benefits. Typical Applications
Features/Benefits Compliant with ESA/ESCC specification Solderable PCB terminations Available with or without brackets High density layouts Typical Applications Space equipments Avionics / Military Industrials
General characteristics
Multipole Industrial Connectors General characteristics The multipole connectors for industrial purposes are used in electric and electronic machinery, robots, electric panels, control equipments and wherever
Technical Data, 4-way. Cannon APD / ISO Connectors. Electrical Data. Mechanical Data. Environmental Data (acc. ISO 15170) Materials List
Technical Data, 4-way Cannon APD / ISO 15170 Connectors APD 4-way connectors are the original DIN72585 (now ISO 15170) versions using a 2,5 mm contact system. Designed for automotive applications they
High Performance, Miniature Circular Connectors
High Performance, Miniature Circular Connectors HR22 Series Product specifications Ratings Rated current 2A Operating temperature range -25ç to +85 Rated voltage 100V AC, 140V DC Storage temperature range
0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
High Voltage Wire-to-Board Connectors
High Voltage Wire-to-Board Connectors MDF51 Series Simple and secure mating with one push Socket Header Lock Fig.1 Features Secure hold during the soldering operation 1. Simple, one step mating Built-in
Han K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/
Han K 3/0, K 3/2 / Han HC Contents Page Technical characteristics Han K 3/0, Han K 3/2... 14.02 Inserts Han K 3/0, Han K 3/2... 14.03 Hoods/Housings Han 24 HPR for Han K 3/0, Han K 3/2... 14.04 Technical
Introduction Fuseholders. Electroustic Ltd (0)
Introduction Fuseholders Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals
Water-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
Excel Mate Mono High Voltage with Inter-Lock
Amphenol Amphenol PCD Shenzhen Excel Mate Mono High Voltage with Inter-Lock AMPHENOL PCD SHENZHEN www.amphenolpcd.com.cn CONTENT ExcelMate Mono (HVBI) PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE......
REP Series. Environmentally-Sealed Rectangular Plastic Connectors
Environmentally-Sealed Rectangular Plastic Connectors REP Series Environmentally - Sealed Rectangular Plastic Connectors Optimised for use in rail and embedded applications Smiths Interconnectors REP Series,
Stac64 UnSealed connector SyStem
Stac64 A stackable connection system for unsealed applications, providing single and multi-pocket PCB solutions, offering a diverse range of circuit sizes Stac64 34729 Female Signal Receptacle 34803 CTX64
General Purpose Relays Accessories. Accessories Industrial Power Relay RT
Industrial Power Relay RT n For Industrial Power Relay RT pinnings 3.5 mm / 5 mm; n New retainer clip with ejection function n Easy replacement of relays on a densely packed DIN rail n No reduction of
3.3mm Pitch Small Size Connectors for Internal Power Source
3.3mm Pitch Small Size Connectors for Internal Power Source DF33C Series Positive Lock Completely enclosed locking system Features 1. 5 mps capacity When used with 20 WG wire, this connector has a maximum
Insulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters.
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 18 mm Insulator Connector inserts: Polyamide
RockStar HighPower. Contents. RockStar HighPower Introduction C.2 C.1
ontents Introduction.2 HighPower 250 A.4 4000 V 250 A 1 4 poles HighPower 550 A.10 4000 V 550 A 1 3 poles.1 Introduction Uncompromising power in clever and safe packaging. The modular high-current connector
Fuseholders. Introduction
Introduction Fuseholders Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals
Ultra-small, power/signal contact design for Board-to-Board/FPC-to-Board providing 3A max current
NEW Ultra-small, power/signal contact design for Board-to-Board/FPC-to-Board providing 3A max current BM29 Series 20% reduction in size compared with alternate Hirose s products 3.16mm BM29 6 contacts
0.5mm Pitch SMT Board to Board Connector
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
.4mm Pitch, 1.5 to 4.mm Height, Board-to-Board and Board-to-FPC Connectors DF4 Series Space saving Space saving Jun.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. High density
0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors
0.4 mm Pitch, 0.6 and mm Height, Board-to-Board and Board-to-FPC Connectors BM20 Series BM20 2.3mm Existing products 2.98mm Receptacle A 22.3% reduction in size! 2.98 0.4 =About 3.0mm2 Header BM20 2.3
V REG.-Nr. 6106, Z E SCHRACK. Accessories Industrial Power Relay RT. General Purpose Relays. pinnings 3.5mm / 5mm; relay height 15.
Accessories Industrial Power Relay RT n For Industrial Power Relay RT pinnings 3.5mm / 5mm; relay height 15.7 mm n New retainer clip with ejection function n Easy replacement of relays on a densely packed
Relays & Sockets. RR Series Power Relays. Part Number Selection. Key features: Sockets IDEC (4332) USA & Canada
Key features: SPDT through PDT, 0 contacts Midget power type relays vailable in pin and blade terminal styles. Options include an indicator, check button for test operations and side flange. Series Power
0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
.4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization
Miniature Waterproof Plastic Connectors
Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 32.3 3 and pos. Ø12. Features 1. Small-size with low profile 3, contacts : Maximum outer diameter Ø12.mm Mated length 32.3mm (from the
Monobloc Insulator Rectangular Connectors
HYPERMOD NG series Monobloc Insulator Rectangular Connectors Compliant with DIN 43652 Up to 500 mating cycles Quadrax contacts grounding IP50 & IP66 sealing IDEAL FOR RAIL APPLICATIONS The HyperMod NG
Product Compliant to DIN41612/IEC603-2 Standard
Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type
RU Series Universal Relays
Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal
Connectors Type M DIN / IEC Catalog E /01 Edition 1
Connectors Type M DIN 41612 / IEC 60603-2 www.erni.com www.erni.com Contents General Information 3 Electrical & Mechanical Specifications for Connectors 4 Standard Male Connectors for Daughtercards 6 Standard
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002
Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
Product Specification AMP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version
Product Specification 108-60026 MP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version 1. 1.1 Scope: Contents: This specification covers the requirements for product performance, test methods and
0.8mm Pitch, Compact and Robust Wire-to-Board Connectors
0.8mm Pitch, Compact and Robust Wire-to-Board Connectors DF52 Series Small and robust structure Board side Cable side Thick wall parts Thick wall parts Features 1. Small-sized connector 0.8mm Pitch, 1.75mm
Amphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock
Amphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock www.amphenolpcd.com.cn CONTENT HVBI PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE...... 3 alternate KEYING positions............
FUSEHOLDERS. Type Fuse Size (mm) Page. Type Fuse Size (mm) Page
Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
EPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
about us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.
table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts
SNP-8 Series Single mode FC CONNECTOR PLUG - for Angled-PC, Conical Shape -
DOCUMENT NUMBER S05-H036-02E Single mode FC CONNECTOR PLUG - for Angled-PC, Conical Shape - TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN.