0.6mm Pitch Stacking Height 3mm to 16mm Connectors

Transcription

1 .6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking height of mated connectors ranges from 3mm to 16mm. (Fig.. ) 2. SMT Coplanarity The coplanar tolerance at the solder area is less than.1mm. 3. Mating Guide Built-in guide ribs and a chamfer allow for ±.6 mm of mis-alignmet and ensures easy mating. 4. Mis-insertion Prevention Bosses located on the bottom side of the connector differ in position and diameter to prevent mis-orientating the parts on the board. 5. Dual Connected Products In order to enhance mounting reliability and accuracy when mounting two of the same connectors at the same time, Hirose offers the option of having two connectors attached to one another by means of a spacer. Pitch between the two connectors is 11mm. Stacking Height 3,4mm-FX8 Series 3,4mm Stacking Height 5 to 16mm-FX8C Series 5 to 16mm Fig.1 Fig.2 In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information

2 FX8 Series Product Specifications Rating Current rating.4a Voltage rating 1V AC Operating Temperature Range -55ç to +85ç (Note 1) Operating Humidity Range -4% to 8% Storage Temperature Range -1ç to +6ç(Note 2) Storage Humidity Range 4% to 7%(Note 2) Items Specifi cations Conditions 1. Insulation Resistance 1Mø min 25V DC 2. Withstanding voltage No fl ashover or insulation breakdown. 3V AC/1 min 3. Contact Resistance 45mø max. 1mA 4. Vibration No electrical discontinuity of 1µs or more Frequency : 1 to 55Hz, single amplitude of.75mm, 2 hours in each of the 3 axis directions. 5. Humidity (Steady state) 6. Temperature Cycle Contact resistance : 55mø max. : Insulation resistance : 1Mø min. Contact resistance : 55mø max. : Insulation resistance : 1Mø min. 96 hours at 4ç and humidity of 9% to 95% (-55ç : 3 minutes, 15 to 35ç : 2 to 3 minutes 85ç : 3 minutes, 15 to 35ç : 2 to 3 minutes) 5 cycles 7. Mating Cycles Contact resistance : 55mø max. 5 cycles 8. Resistance to Soldering No deformation of components affecting Refl ow : At the recommended temperature profile heat performance. Manual soldering : 36ç for 5 seconds Note 1 : Includes temperature rise caused by current fl ow. Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range includes the non conducting condition in storage, shipment or during transportation. Material / Finish Part Material Finish Remarks Insulator PPS Light brown UL94V- Contact area Gold plated Contact Lead area Tin (Note 2) Phosphor bronze Contact area Contact Gold plated Lead area Note 1 : Slight color difference to the resin may occur. This will not affect fi t, form or function of the connector. Note 2 : FX8-*P-SV is gold plated. Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Single Product Mating Sectional View FX8-12 P - SV 1 (92) q Series Name : FX8 w No. of contacts : 6, 8, 9, 12, 14 e Connector type r Contact type P : S : SV : Board vertical type t Product height variation : none= standard (minimum low profile) 1 : +1mm y Package Form None, (71) : Tray package product (21), (91) : Tube packaging product (22), (92) : Emboss tape package product (The above illustration represents the stacking height 3mm type.) BStacking Height Variation Single Product FX8-**P-SV FX8-**P-SV1 FX8-**S-SV 3mm 4mm 3 to 4 2

3 [FX8-**P-SV].6±.1 B +.5 _.2 C +.5 _.2 D± _.3 5.1± ±.25 (.4) (C1) Polarization mark (.75) (Ø.9) t.2±.3 w.25±.3 (Ø.6) 2-(C.2) (1.5) E±.1 Part No. ** HRS No. No. of contacts A B C D E RoHS FX8-6P-SV(**) ** FX8-8P-SV(**) ** FX8-9P-SV(**) ** FX8-1P-SV(**) ** FX8-12P-SV(**) ** FX8-14P-SV(**) ** ** 71 : Tray packaging 91 : Tube packaging 92 : Embossed tape packaging Note 1 : Please place orders in full magazine/tube quantities. Note 2 : Reels are sold containing 1, pcs/reel. Please refer to the delivery form on page 6 for details. Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes. [FX8-***P-SV1] 6.5 _.3 5.1± ±.25 (.4) (.75) (1).6±.1 Polarization mark B +.5 _.2 C +.5 _.2 D±.2 Yes (Ø.9) t.2±.3 w.25±.3 (Ø.6) 2-(C.2) (1.5) E±.1 Part No. ** HRS No. No. of contacts A B C D E RoHS FX8-6P-SV1(**) ** FX8-8P-SV1(**) ** FX8-9P-SV1(**) ** FX8-1P-SV1(**) ** FX8-12P-SV1(**) ** FX8-14P-SV1(**) ** ** 71 : Tray packaging, 91 : Tube packaging, 92 : Embossed tape packaging Note 1 : Please place orders in full magazine/tube quantities. Note 2 : The embossed tape packaged parts are available for all pin counts, except the 14 pin count. Reels are sold containing 1, pcs/reel. Please refer to the delivery form on page 15 for details. Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes. Yes 3

4 [FX8-**S-SV] B +.2 C +.2 (1).6±.1 D±.2 7 _.3 5.6± ±.25 (.75) (Ø.9) Polarization mark (Back side) t.2±.3 w.25±.3 E±.1 (Ø.6) 2-(C.2) (1.8) Part No. ** HRS No. No. of contacts A B C D E RoHS FX8-6S-SV(**) ** FX8-8S-SV(**) ** FX8-9S-SV(**) ** FX8-1S-SV(**) ** FX8-12S-SV(**) ** FX8-14S-SV(**) ** ** None : Tray packaging, 21 : Tube packaging, 22 : Embossed tape packaging Note 1 : Please place orders in full magazine/tube quantities. Note 2 : Reels are sold containing 1, pcs/reel. Please refer to the delivery form on page 6 for details. Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes. PCB Mounting Pattern Yes Recommended metal mask thickness : t =.15mm Recommended metal mask thickness : t =.15mm If the inside (the connector mounting lower side) of the SMT portion is not treated with the insulation tape and so on, the area is specified as a pattern prohibited area. 4

5 Connector Precautions for use 1. Tolerance Clearance on the Mating Side The effective contact length of the product is set to.7mm. Please make sure there is less than.2mm clearance between the header and receptacle during mating. 2. Support between the PCBs Please be sure to fix the boards to each other with screws or other means of support. Do not use only the mated connector to support the boards. 3. Stacking Height Tolerance for Mating 4. Multiple mounting on same PCB is not recommended in principle 5. Mounting Temperature Profile (Reference) Temperature (ç) Stack 3mm _.2 mm Stack 4mm _.2 mm Note : Please Note that the above stacking tolerance doesn't include the solder paste thickness. 15ç 9 to 12s Pre-heating time (15 to 2ç) 2ç Time (Second) (MAX 25ç) MAX 6s Soldering Time (22ç min.) 22ç HRS test conditions Test board Glass epoxy 161mm 1mm 1.6mm thick Solder method : Reflow Solder composition : Paste, 96.5%Sn/3%Ag/.5%Cu Metal mask :.15mm thick Reflow cycles : 2 cycles The temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/ thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. 5

6 Packaging Type (9.7) [Embossed Tape Package] D Packaging Type Tube packaging Embossed Tape Packaging Packaging Specification [Tube packaging] [FX8-**P-SV (91)] [FX8- **P-SV1 (91)] Embossed Carrier Tape Dimensions C.4 55±2 No. of contacts Marking Unreeling direction Ø contacts (7.2) 2.2 [26.2][34.2] 4.4 [52.4][68.4] 44 [56][72] 8 contacts 9 contacts [FX8-**S-SV (21)] 1 contacts Reel Dimensions (FREE) Ø13 12 contacts E Ø8 14 contacts Pieces per tube 21 pcs 17 pcs 15 pcs 14 pcs 12 pcs 1 pcs Sales unit Per tube. Please place orders in full magazine/tube quantities. Tube Total Length 55mm±2mm Tape Width 44mm 44mm 44mm 56mm 56mm 72mm Product Pitch 12mm Embossed Reel diameter Refer to the table on catalog page 6. Pieces per reel 1 pcs/reel Sales unit Per reel * * The chart above applies only to individual connectors. Dual connected products are packaged and shipped in trays only. (9.8) 55±2 Marking [56.4][72.4] Termination section End Contact area Installation area: Leader area (4mm min.) (The product includes 1 pieces.) (5.2) (1.7) 1.5 A B Space (More than 1 pockets) Emboss tape Space (1 pockets min.) Cover tape *The figure above shows the receptacle in its pocket. P/S Part No. A B C D E FX8-**P-SV (92) 3.2 Ø FX8-**P-SV1 (92) (Note 1) FX8-**S-SV (22) Ø 33 ** : No. of contacts Note 1 : Ø 33 are for 6, 8 and 9 contacts. Ø 36 are for 1, 12 and 14 contacts. 6

7 FX8C Series Product Specifications Ratings Rated current :.4A Rated voltage : AC 1V Operation temperature range : -55 to +85 C (Note 1) Operation humidity range : 4 to 8% Storage temperature range : -1 to +6 C (Note 2) Storage humidity range : 4 to 7% (Note 2) Items Specifi cations Conditions 1. Insulation resistance Min of 1Mø Measured at 25 V DC 2. Withstand voltage No fl ashover or dielectric breakdown. 3V AC for 1 minute 3. Contact resistance Max of 8Mø Measured at 1 ma 4. Vibration proof 5. Moisture resistance 6. Temperature cycle No electrical discontinuity lasting for a min of 1μs. Contact resistance : a max of 1mø ; Insulation resistance : a min of 1Mø Contact resistance : a max of 1mø ; Insulation resistance : a min of 1ø 1 to 55Hz, half amplitude :.75mm, 3 axis directions, 1 cycles each. Left for 96 hours at the temperature of 4 ±2 C and the humidity of 9 to 95% (-55 C for 3 minutes 15 to 35 C for 2 to 3 minutes 85 C for 3 minutes 15 to 35 C for 2 to 3 minutes) in 5 cycles 7. Mating cycles Contact resistance : a max of 1mø 5 times 8. Soldering heat resistance No dissolution of the resin affecting performance. Reflow : With recommended temperature profile, at the soldering iron temperature of 35 C for 5 seconds Note 1 : Includes the temperature rise caused by current fl ow. Note 2 : Storage as described here represents the long-term-storage status of unused items before they are mounted on PCB. Operation humidity range applies to the unpowered status after the items are mounted on PCB. Note 3 : The contact resistance noted above is measured using a connector combination with a 16mm stack height. Material / Finish Part name Material Treatment Remarks Insulator PPS resin Light brown UL94V- Contact area Gold plating contact Lead area Pure tin plating (Note 2) Phosphor bronze Contact area Gold plating contact Lead area Pure tin plating (Note 2) Note 1 : Black dots or other color irregularities may occur in the insulator resin. In addition, the color may change if exposed to sunlight or fl orescent light. But this does not affect the quality or performance. Note 2 : FX8C-*P-SV (*) and FX8C-*S-SV are gold plated. Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Single Product q Series name : FX8C w No. of contacts : 6, 8, 1, 12, 14 e Connector type : P : S : r Contact form : SV : Vertical PCB type Two-connected products q Series name : FX8C w No. of contacts : 6 2, 8 2, 1 2, 12 2, 14 2 Example : 12/12=24 contacts e Connector type : P : S : FX8C - 12 P - SV 1 (91) t Variable product height : None : Standard (Minimum height product) 1 : +1mm 6 : +6mm y Packaged state (71) : Tray packaging (68), (91) : Magazine/tube packaging (92) : Embosses tape packaging (93) : Vacuum tape, embosses tape packaging FX8C - 12/12 P 11 - SV 1 J *Dual connected products are packed in trays as the standard delivery method. r Pitch between dual connected products t Contact form : SV : Vertical PCB type y Variable product height : None : Standard (Minimum height product) 1 : +1mm 6 : +6mm u J : Dual connected product 7

8 Stacking Height Variations FX8C-**P-SV FX8C-**/**P11-SVJ FX8C-**P-SV1 FX8C-**/**P11-SV1J FX8C-**P-SV2 FX8C-**/**P11-SV2J FX8C-**P-SV4 FX8C-**/**P11-SV4J FX8C-**P-SV6 FX8C-**/**P11-SV6J ** ** ** ** ** ** FX8C-**S-SV FX8C-**/**S11-SVJ 5mm 6mm 7mm 9mm 11mm (2)Effective mating length (Stacking height) FX8C-**S-SV5 FX8C-**/**S11-SV5J ** ** ** ** ** ** 1mm 11mm 12mm 14mm 16mm (2)Effective mating length 5 to 16 8

9 (Single Product) [FX8C-**P-SV] (.75) 4.45±.25 (.4) 6.5 _.3 5.1±.3 (C1) P±.6±.1 (Ø.9) A±.25 B C D±.2 t.2±.3 w.25±.3 E±.1 (Ø.6) 2-(C.2) (1.5) [FX8C-**P-SV1] [FX8C-**P-SV2] [FX8C-**P-SV4] [FX8C-**P-SV6] _ (.4) (.75) F± ±.3 (C1) P=.6±.1 (Ø.9) B C D±.2 t.2±.3 w.25±.3 E±.1 (Ø.6) (1.5) 2-(C.2) Part No. HRS No. No. of contacts A B C D E RoHS FX8C-6P-SV(**) ** FX8C-8P-SV(**) ** FX8C-1P-SV(**) ** Yes FX8C-12P-SV(**) ** FX8C-14P-SV(**) ** Note 1 : Embossed tape packaging product are sold in full reel quantities. For details, see the item showing delivery forms in Page 16. Note 2 : Please place orders in full magazine/tube quantities. Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes. Part No. HRS No. No. of contacts A B C D E F RoHS FX8C-6P-SV1(**) ** 5.45 FX8C-6P-SV2(**) ** FX8C-6P-SV4(**) ** 8.45 FX8C-6P-SV6(**) ** 1.45 FX8C-8P-SV1(**) ** 5.45 FX8C-8P-SV2(**) ** FX8C-8P-SV4(**) ** 8.45 FX8C-8P-SV6(**) ** 1.45 FX8C-1P-SV1(**) ** 5.45 FX8C-1P-SV2(**) ** FX8C-1P-SV4(**) ** 8.45 Yes FX8C-1P-SV6(**) ** 1.45 FX8C-12P-SV1(**) ** 5.45 FX8C-12P-SV2(**) ** FX8C-12P-SV4(**) ** 8.45 FX8C-12P-SV6(**) ** 1.45 FX8C-14P-SV1(**) ** 5.45 FX8C-14P-SV2(**) ** FX8C-14P-SV4(**) ** 8.45 FX8C-14P-SV6(**) ** 1.45 Note 1 : Embossed tape packaging product are sold in full reel quantities. For details, see the item showing delivery forms in Page 16. Note 2 : Please place orders in full magazine/tube quantities. Note 3 : For FX8C- ** P-SV6 connectors, there is a spacer attached between the leads. Please request the specific drawing for clarification. Note 4 : Please note that tray packaged parts are not suitable for use with automatic mounting processes. 9

10 (Single Product) [FX8C-**S-SV] (C1) 7 (.75) 3.95±.25 _.3 5.6±.3 (Ø.9) P=.6±.1 B +.2 C +.2 D±.2 t.2±.3 w.25±.3 E±.1 (Ø.6) 2-(C.2) (1.8) Part No. HRS No. No. of contacts A B C D E RoHS FX8C-6S-SV(**) ** FX8C-8S-SV(**) ** FX8C-1S-SV(**) ** Yes FX8C-12S-SV(**) ** FX8C-14S-SV(**) ** Note 1 : Embossed tape packaging product are sold in full reel quantities. For details, see the item showing delivery forms in Page 16. Note 2 : Please place orders in full magazine/tube quantities. Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes. [FX8C-**S-SV5] (C1) 8.95±.25 _ ±.3 (.75) (Ø.9) P=.6±.1 B +.2 C +.2 D±.2 (back) t.2±.3 w.25±.3 (Ø.6) E±.1 2-(C.2) Note 1 : Embossed tape packaging product are sold in full reel quantities. For details, see the item showing delivery forms in Page 16. Note 2 : Please place orders in full magazine/tube quantities. Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes. (1.8) Part No. HRS No. No. of contacts A B C D E RoHS FX8C-6S-SV5(**) ** FX8C-8S-SV5(**) ** FX8C-1S-SV5(**) ** Yes FX8C-12S-SV5(**) ** FX8C-14S-SV5(**) ** BRecommended PCB layout and metal mask dimensions for single connector (mounting side) [FX8C-**P-SV*] [FX8C-**S-SV, SV5*] *Recommended metal mask thickness : t =.15mm *Recommended metal mask thickness : t =.15mm * The inside of SMT land (bottom of the connector being mounted) will be a patterning restricted area if no treatment such as insulation tape is applied. (FX8C-**S-SV, SV5 are not applicable.) 1

11 (Dual Connected Product) [FX8C-**/**P11-SVJ] (16.1) (3.35) (11) B±.3 C D E±.2 F±.1 (4.5) [FX8C-**/**P11-SV1J] [FX8C-**/**P11-SV2J] [FX8C-**/**P11-SV4J] [FX8C-**/**P11-SV6J] (16.1) (G) (11) B±.3 C D E±.2 F±.1 (4.5) Part No. HRS No. No. of contacts A B C D E F RoHS FX8C-6/6P11-SVJ(71) FX8C-8/8P11-SVJ(71) FX8C-1/1P11-SVJ(71) Yes FX8C-12/12P11-SVJ(71) FX8C-14/14P11-SVJ(71) Note : Dual connected products are packaged and shipped in trays. And as such, are not suitable for use with automatic mounting processes. Part No. HRS No. No. of contacts A B C D E F G H RoHS FX8C-6/6P11-SV1J(71) FX8C-6/6P11-SV2J(71) FX8C-6/6P11-SV4J(71) FX8C-6/6P11-SV6J(71) FX8C-8/8P11-SV1J(71) FX8C-8/8P11-SV2J(71) FX8C-8/8P11-SV4J(71) FX8C-8/8P11-SV6J(71) FX8C-1/1P11-SV1J(71) FX8C-1/1P11-SV2J(71) FX8C-1/1P11-SV4J(71) Yes FX8C-1/1P11-SV6J(71) FX8C-12/12P11-SV1J(71) FX8C-12/12P11-SV2J(71) FX8C-12/12P11-SV4J(71) FX8C-12/12P11-SV6J(71) FX8C-14/14P11-SV1J(71) FX8C-14/14P11-SV2J(71) FX8C-14/14P11-SV4J(71) FX8C-14/14P11-SV6J(71) Note 1 : Dual connected products are packaged and shipped in trays. And as such, are not suitable for use with automatic mounting processes. Note 2 : For FX8C- ** / ** P11-SV6J connectors, there is a spacer attached between the leads. Please request the specifi c drawing for clarification. 11

12 (Dual Connected Product) [FX8C-**/**S11-SVJ] (16.6) (3.4) (11) B±.3 C +.2 D +.2 E±.2 (back) F±.1 (4) [FX8C-**/**S11-SV5J] (16.6) (11) (8.4) B±.3 C +.2 D +.2 E±.2 (back) F±.1 (4) Part No. HRS No. No. of contacts A B C D E F RoHS FX8C-6/6S11-SVJ(71) FX8C-8/8S11-SVJ(71) FX8C-1/1S11-SVJ(71) Yes FX8C-12/12S11-SVJ(71) FX8C-14/14S11-SVJ(71) Note : Dual connected products are packaged and shipped in trays. And as such, are not suitable for use with automatic mounting processes. Part No. HRS No. No. of contacts A B C D E F RoHS FX8C-6/6S11-SV5J(71) FX8C-8/8S11-SV5J(71) FX8C-1/1S11-SV5J(71) Yes FX8C-12/12S11-SV5J(71) FX8C-14/14S11-SV5J(71) Note : Dual connected products are packaged and shipped in trays. And as such, are not suitable for use with automatic mounting processes. BRecommended PCB layout and metal mask dimensions for dual connected products (mounting side) [FX8C-**/**P 11-SVJ, SV1J] [FX8C-**/**S 11-SVJ, SV5J] position position *Recommended metal mask thickness :.15mm *Recommended metal mask thickness: t =.15mm * The inside of SMT land (bottom of the connector being mounted) will be a patterning restricted area if no treatment such as insulation tape is applied. (FX8C-**/**S11-SV5J is not applicable.) 12

13 BDetailed drawing on dual connected products after the spacers are removed (individual connector from dual connected product) (back) (back) 13

14 BHow to Use the Connector 1. Permissible gap between mating surfaces The effective mating length of this product is 2.mm. Please make sure that the gap between the header and receptacle when mated will be 1.2mm or less. 2. Fixation between mounted PCBs If the connector is secured to the board with only other connectors, please make sure that no vibrations or impact will occur. 3. Tolerances in stacking height when mated +.3 Stack Amm A.2 mm Note: Please note that the thickness of solder cream is not taken into account for the above tolerances in stacking height. 4. Using dual connected products Dual connected products are fixed with spacers on both longitudinal sides. However, the products cannot be mated in that state. Please make sure to remove the spacers before mating. (Please do not remove the spacers before mounting on PCB.) 5. Temperature profile for mounting (reference) Temperature (ç) ç 2ç (Peak temperature : Max 25ç) (9 to 12 seconds) Within 6 seconds Preheating period (15 to 2ç) 22ç Soldering period (a minimum of 22ç) Coupler spacers (joint) Before removing the joint bar Note : Please use dual-connected products for multiple mounting. However, multiple mounting of dual-connected products are not recommended. 6. Usage Recommendations This product has been thin-formed for minimization. <Applicable conditions> After removing the joint bar Reflow with infrared light and heat Reflow method (SENSBEY NR-II) Environment in the Ambient air reflow furnace Cream type (Sn-3Ag-.5Cu) (Flux contained amount : 11 Wt%) Solder (M75-221CM manufactured by Senju Metal Industry Co., Ltd.) Size mm PCB Material : Glass epoxy Metal mask thickness Thickness :.15mm Note 1 : This temperature profile shows recommended values. Temperature should be measured on the top of the connector. Note 2 : The reflow process should be limited to two times. Note 3 : Results may differ depending on the type and manufacturer of solder cream, PCB size, mounting materials and other conditions. Please be sure to confirm the mounting conditions before use. Care should be taken that excessive prying mating/unmating could cause damage and contact failure. 14

15 BForm of Delivery Packaging style No. of contacts 6 contacts 8 contacts 1 contacts 12 contacts 14 contacts Product quantity 21 pieces 17 pieces 14 pieces 12 pieces 1 pieces Magazine packaging Sales unit Please place orders in full magazine/tube quantities. Overall magazine length 55mm ± 2mm Tape width (JIS) Product pitch (12mm) Embossed tape packaging Embossed reel diameter Please see the table shown in Page 16 of this catalog. Product quantity Please see the table shown in Page 16 of this catalog. Sales unit Full reels. Please see the table shown in page 16 of this catalog. * * The chart above applies only to individual connectors. Dual connected products will be packaged and delivered in trays. BPackaging Specification [Magazine Packaging] [FX8C-**P-SV(91)] [FX8C-**P-SV1(91)] [FX8C-**P-SV2(91)] [FX8C-**P-SV4(91)] [FX8C-**P-SV6(91)] [FX8C-**S-SV(68)] [FX8C-**S-SV5(91)] P/S Part No. A FX8C-**P-SV(91) 9 FX8C-**P-SV1(91) 1 FX8C-**P-SV2(91) 11 FX8C-**P-SV4(91) 13 FX8C-**P-SV6(91) 15 FX8C-**S-SV(68) 7.4 FX8C-**S-SV5(91) 12.4 Marking Marking (back) 15

16 Powered by TCPDF ( [Embossed Tape Packaging] Carrier Dimensions Reel Dimensions Unreeling direction D C.4 or A B Ø [26.2][34.2] [52.4] [68.4] 44 [56] [72] * The figure above shows FX8 receptacles packaged on a embossed tape. Dimensions shown in brackets [ ] are those for tape widths of 56mm or 72mm. Reel dimensions [56.4][72.4] Termination Attachment Leader (4 mm or longer) Cavity (1 pockets or more) Ø13 Ø21 E Ø8*1 Embossed tape Cavity Cover tape (1 pockets or more) *1 For FX8C-14S-SV(92), E dimension is 37 in diameter and core dimension is 1 in diameter. *2 For FX8C-12P-SV2(92), FX8C-12S-SV5(92), and FX8C-14S-SV5(92), E dimension is 38 in diameter. Note : Some products are not available packaged on an embossed tape. Please be sure to clarify the packaging type before you order. P/S Part No. A B C D E Product quantity FX8C-**P-SV(92) Ø37 1 pcs/reel FX8C-**P-SV1(92) Ø37 1 pcs/reel FX8C-**P-SV2(92) Ø33 5 pcs/reel *2 FX8C-**P-SV4(92) Ø37 5 pcs/reel FX8C-**P-SV6(92) Ø37 5 pcs/reel FX8C-**S-SV(92) Ø33 1 pcs/reel *1 FX8C-**S-SV5(92) Ø37 5 pcs/reel *2 ** : No. of contacts 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 6/218. Contents are subject to change without notice for the purpose of improvements.