High Power/Signal Connectors for Industrial Machinery

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "High Power/Signal Connectors for Industrial Machinery"

Transcription

1 NEW High Power/Signal Connectors for Industrial Machinery PQ Series Variations Non water-resistant 20 position type Contact (19 A/pin) type Non water-resistant 48 position type Contact (12.5 A/pin) type Water-resistant 50 pos. type Contact (12.5 A/pin) type PQ50W PQ50S PQ50 General The PQ series is an interface connector designed to handle high power/signal connections in industrial machinery. Available in a water-resistant or non-waterresistant type, they are capable of handling up to 12.5 A per pin (PQ50S and PQ50W) or 19 A per pin (PQ50). Features PQ50 and PQ50S Series [ Non water-resistant type ] 1. Side locking spring structure delivers a clear tactile click. (Available on the PQ50 and PQ50S series) The left and right buttons disengage the mated lock. (Side locking system). The easy mating operation delivers a clear tactile click. (Fig.1) 2. Strengthened cable clamps (Available on the PQ50 and PQ50S series) Cable clamp strength is 98 N or more. (* Actual is 400 N or more.) The structure will prevent the mated connecter and clamp from detaching against excessive forces.. Different cover options A robust, enhanced, shielded die-cast shell is available on the PQ50 series or a engineered, light weight plated plastic resin shell for the PQ50S series. The die cast shell delivers an enhanced EMI shield on the PQ50 series and the plated plastic resin of the PQ50S series cover case and panel shell ensure ESD and EMI performance. 4. Coding key system provides flexibility with multiple options (Available on the PQ50 and PQ50S series) The coding key system prevents incorrect mating and has multiple variations available. 5. Rear mounted panel shell is available. (Available on the PQ50 and PQ50S series) After attaching the panel shell to the chassis, it is possible to install or remove the crimp housing. (Fig.2) 6. Reliable ground connection structure. (Available on the PQ50 and PQ50S series) The crimp contacts can be mounted directly onto the panel shell with screws which enhances the grounding connections. (Fig.) 7. Supports NFPA79 compliant cables (with 600 V capability). (PQ50 Series) Due to restrictions on the AWM cables by NFPA79 revision, the requirements of listed cables has increased for wires used in industrial machines in the U.S.A. This product complies with the restrictions and requirements of NFPA79. Side locking structure emits a tactile click and produces a secure lock Easy extraction It is possible to insert the terminated housing from the rear M Screw Chassis Panel Clear tactile click! Panel Shell Female Contact Housing Easy and reliable ground connection Fig.1 Fig.2 Fig

2 [Water-resistant type] PQ50W Series 1. Water resistant (IP65) Rated at IP65 when in the mated condition. 2. Special locking structure. Special lever and cam structure delivers easier operation and assists with the insertion and extraction of this connector. (Fig.1). Rear mounted unit offers easy operations. Two styles are available; one with 19 A/pin contacts or one with 12.5 A/ pin contacts. (Fig.2) 4. Metal plated cover of engineering plastic resin adds strength and EMI protection. This robust connector uses a metal plated material of special engineering plastic for the cover and panel shell to ensure high ESD and EMI performance. 5. Independent ground contact structure. Secure grounding is accomplished by use of the plated plastic cover and the independent ground contacts. (Fig.) 6. Coding key system provides flexibility with multiple options The coding key system prevents incorrect mating and has multiple variations available. [Contact variations] 1. Available contact options Two styles are available; one with 19 A/pin contacts or one with 12.5 A/pin contacts. 2. Lance protection structure The side wall of the contact prevents lance deformation and helps to prevent tangled wires. (Fig.4). Sequential contacts of different length are available Two types of different contact length are available for the male contact. (Fig.5) 4. Highly reliable contact structure The female contact assures a reliable connection by using multiple contact points and a unique spring structure. (Fig.6) Special locking structure with lever Fig.1 Supports mounting from the backside of the panel Panel Side Panel Side:Female Cont. Plug Side Male Cont. Plug Side Panel Side:Male Cont. Plug Side Female Cont. Independent Ground Contacts Independent Ground Contacts Fig.2 Fig. [ 19 A/pin type ] Male contact Lance Protection Structure Lance Female contact Different length sequential contacts [ 19 A/pin type ] Sequence Contact (Long) Highly Reliable Contact Structure [ 19 A/pin type ] Point Contact [ 12.5 A/pin type ] 2 Point Contact Standard Contact [ 12.5 A/pin type ] Male contact Lance Lance protection guard Female contact 1.2mm [ 12.5 A/pin type ] Two types of contacts can be used depending on application Sequence Contact (Long) Spring Deflection Spring Deflection Lance protection guard Fig.4 1.2mm Standard Contact Fig.5 Multiple contact points and very flexible spring design. Fig.6 2

3 Product Specifications [Non water-resistant type] PQ50 Series Ratings Voltage AC/DC 600V Operating Temp. Range 40ç to +105ç Current 19 A/pin With UL1015 AWG#16 * Depending on current capacity of the cable used. Storage Temp. Range 55ç to +85ç Items Specifi cations Conditions 1. Contact resistance 1 10 mø max Measured at 100 ma 2. Insulation resistance Minimum of 5,000 Mø Measured at DC 500 V. Withstand voltage No fl ashover or breakdown. Apply AC 2,200 V for one minute. 4. Durability 5. Vibration resistance 6. Shock resistance 7. Temperature cycles 8. Moisture resistance in steady state 9. Salt water spray Contact resistance: Increase by 10 mø or less from the initial value. qno electrical discontinuity of 10 µs or more. wno broken, cracked or loosened parts. qchange of contact resistance: 20 mø or less winsulation resistance: minimum of 1,000 Mø eno broken, cracked or loosened parts. qchange of contact resistance: 20 mø max w Insulation resistance: minimum of 1,000 Mø (after drying). eno breakage, cracks or loosened parts. No signifi cant corrosion or damage that impairs functioning. 1 Excluding conductor resistance of the cable. *For test methods not described here, JIS C 5402 is applied. Perform 500 mating cycles. Frequency 10 to 55 Hz (5 min/cycle). With half amplitude 0.75 mm, 2 hours each for directions. Acceleration 490 m/s 2, duration 11 ms, half-sine wave, times each for 6 axial directions. Temperature: to to +5ç Time: 0 2 to 0 2 to min. Subjected to 5 cycles of time and temp as noted. Left in environment of 60ç ±2 and humidity of 90% to 95% for 96 hours. 5% concentration of salt water spray for 48 hours. (in mated condition) [ Non water-resistant type ] PQ50S Series Rating Voltage AC/DC 00V Operating Temp. Range 40ç to +105ç Current 12.5 A/pin With UL1007 AWG#18 * Depending on current capacity of the cable used. Storage Temp. Range 55ç to +85ç Items Specifi cations Conditions 1. Contact resistance 1 5 mø max Measured at 100 ma 2. Insulation resistance Minimum of 5,000 Mø Measured at DC 500 V. Withstand voltage No fl ashover or breakdown. Apply AC 2,200 V for one minute. 4. Durability 5. Vibration resistance 6. Shock resistance 7. Temperature cycles 8. Moisture resistance in steady state 9. Salt water spray Contact resistance: Increase by 10 mø or less from the initial value. qno electrical discontinuity of 10 µs or more. wno broken, cracked or loosened parts. qchange of contact resistance: 10 mø or less winsulation resistance: Minimum of 1,000 Mø eno broken, cracked or loosened parts. qchange of contact resistance: 10 mø or less w Insulation resistance: Minimum of 1,000 Mø (after drying). eno broken, cracked or loosened parts. No signifi cant corrosion or damage that impairs functioning. 1 Excluding conductor resistance of the cable. *For test methods not described here, JIS C 5402 is applied. Perform 500 mating cycles. Frequency 10 to 55 Hz (5 min/cycle) With half amplitude 0.75 mm, 2 hours each for directions. Acceleration 490 m/s 2, duration 11 ms, half-sine wave, times each for 6 axial directions. Temperature: to to +5ç Time: 0 2 to 0 2 to min. Subjected to 5 cycles of time and temp. as noted. Left in environment of 60ç ±2 and humidity of 90% to 95% for 96 hours. 5% concentration of salt water spray for 48 hours. (in mated condition)

4 [ Water-resistant type ] PQ50W Series Ratings With 12.5 A/pin type contacts Voltage AC/DC 00V Operating Temp. Range 40ç to +105ç Current 12.5 A/pin With UL1007 AWG#18 * Depending on current capacity of the cable used. Storage Temp. Range 55ç to +85ç With 19 A/pin type contacts Voltage AC/DC 600V Operating Temp. Range 40ç to +105ç Current 19 A/pin With UL1015 AWG#16 * Depending on current capacity of the cable used. Storage Temp. Range Items Specifi cations Conditions 1. Contact resistance 1 5 mø max Measured at 100 ma 2. Insulation resistance Minimum of 5,000 Mø Measured at DC 500 V. Withstand voltage No fl ashover or breakdown. Apply AC 2,200 V for one minute. 4. Durability 5. Vibration resistance 6. Shock resistance 7. Temperature cycles 8. Moisture resistance in steady state 9. Salt water spray Contact resistance: Increase by 10 mø or less from the initial value. qno electrical discontinuity of 10 µs or more. wno broken, cracked or loosened parts. qchange of contact resistance: 10 mø or less winsulation resistance: 1,000 Mø or more eno broken, cracked or loosened parts. qchange of contact resistance: 10 mø or less w Insulation resistance: 1,000 Mø or more (after drying) eno broken, cracked or loosened parts. No signifi cant corrosion or damage that impairs functioning. 10. Water resistance IP65 1 Excluding conductor resistance of the cable. *For test methods not described here, JIS C 5402 is applied. Perform 500 mating cycles. 55ç to +85ç Frequency 10 to 55 Hz (5 min/cycle) With half amplitude 0.75 mm, 2 hours each for directions. Acceleration 490 m/s 2, duration 11 ms, half-sine wave, times each for 6 axial directions. Temperature: to to +5ç Time: 0 2 to 0 2 to min. Subjected to 5 cycles of time and temp. as noted. Left in environment of 60ç ±2 and humidity of 90% to 95% for 96 hours. 5% concentration of salt water spray for 48 hours. (in mated condition) Materials PQ50 Series Item Parts Materials Finish Remarks Receptacle Plug In-line plug Crimp case PBT resin Black UL94V-0 Panel Shell Zinc die cast Nickel plating - Crimp case PBT resin Black UL94V-0 Shell Stainless steel Cover case M4 pan head machine screw Clamp metal M4 pan head machine screw Zinc die cast Steel SPCE OR SPCD Steel Nickel plating Crimp case PBT resin Black UL94V-0 In-line shell In-line cover case Zinc die cast M4 pan head machine screw Steel Nickel plating Clamp metal SPCE OR SPCD M4 pan head machine screw Steel 4

5 PQ50S Series Item Parts Materials Finish Remarks Receptacle Plug PQ50W Series Crimp case PBT resin Black UL94V-0 Panel Shell M4 insert nut Heat-resistant engineering plastic resin Nickel plating Brass Crimp case PBT resin Black UL94V-0 Shell Stainless steel Cover case M4 pan head machine screw Clamp metal M4 pan head machine screw M4 insert nut Heat-resistant engineering plastic resin Steel SPCE OR SPCD Steel Brass Nickel plating UL94V Item Parts Materials Finish Remarks Crimp case Crimp case PBT resin Black UL94V-0 Receptacle Plug Contacts (PQ50, PQ50S, PQ50W) Panel Shell Heat-resistant engineering plastic resin Nickel plating UL94V-0 Ground contact Stainless steel O-ring for mating NBR Lock lever PA resin Black UL94V-0 Rubber packing NBR Plug shell Heat-resistant engineering plastic resin Black Ground contact Stainless steel Nickel plating UL94V-0 M tapping screw Trivalent chromate Steel Cover case Nickel plating Gasket NBR Red Clamp metal (body) Heat-resistant Cable clamp engineering plastic resin Black UL94V-0 M insert nut Brass M pan head machine screw Steel Nickel plating Part No. Parts Materials Finish Remarks PQ50-15PCFA PQ50A -15PCFA Male contact PQ50-15SCFA Female contact PQ PCFA PQ50A -1618PCFA Male contact PQ SCFA Female contact PQ PCFA Gold plating (contact area) Male contact + PQ50A -2022PCFA Copper alloy Tin plating (barrel area) PQ SCFA Female contact PQ50S -1822PCFA PQ50SA-1822PCFA Male contact PQ50SA-1822SCFA Female contact PQ50S -2428PCFA PQ50SA-2428PCFA Male contact PQ50SA-2428SCFA Female contact 5

6 Product Number Structure Crimp Housing PQ 50 W S 25 P UNIT Series name Wiring style PQ Crimping Connector specifi cations W Water-resistant type None Non water-resistant type Contact size Shell size S Small contact (12.5 A/pin) type pos. unit Contact type P Male contact S Female contact Shapes UNIT Rear mount multiple unit None Single unit Crimp contact PQ 50 S A 1822 PC F A Series name Wiring style PQ Crimping Contact size S Small contact (12.5 A/pin) type None Standard contact (19 A/pin) type Contact usage Applicable cable type A Sequence contact (long contact) 15 AWG#14~ AWG#16~18 (UL1007, UL1015) 1822 AWG#18~22 (UL1007) AWG#17 None Standard contact 2022 AWG#20~22 (UL1007, UL1015) 2428 AWG#24~28 (UL1007) AWG#2 Contact type PC Male contact SC Female contact Contact shapes F End-to-end contacts (on reel) None Discrete contacts Contact plating type Clamp metal PQ W CM (17.5) Series name A Gold plating (contact area) PQ Connector specifi cations W Water-resistant type None Non water-resistant type Clamp name Applicable cable diameter Clamp metal (15.0) For applicable cable diameter Ø15.0 (17.5) For applicable cable diameter Ø17.5 (22.0) For applicable cable diameter Ø22.0 6

7 PQ50, PQ50S Series PQ 50 S 48 P PC M Series name Wiring style PQ Crimping Contact size S Small contact (12.5 A/pin) type None Standard contact (19 A/pin) type Shell size pos. shell type pos. shell type Contact type P Male contact S Female contact Case type Case material PQ50W Series PC Plug cover case FL Flange panel shell M Heat-resistant engineering plastic resin PQ 50 W 50 PC JC In-line cover case (for plug cover) DS In-line plug shell (for receptacle shell) None Zinc die cast Series name Wiring style Connector specifications Shell size Case type PQ Crimping Water-resistant type pos. shell type PC Plug cover case (plug cover case) FL Flange panel shell (receptacle panel shell) Functional Diagram PQ50, PQ50S Series qpanel mount receptacle (Female contact) wcable plug (Male contact) ein-line jack (Female contact) Functional Diagram PQ50W Series qpanel mount receptacle wcable plug 7

8 φ4. E D C B A PQ50-20S A B C PQ50-20P D E PQ Series High Power/Signal Connectors for Industrial Machinery Panel mount receptacle PQ50 Series Crimp case (19 A/pin, for female contact) (P=4.6) (P=6.2) PQ50-20S pcs/box PQ50-20S(01) piece/box Panel Shell 40.6±0. R2MAX 2-M 0.5 (through hole) 16.6±0.1 21±0..2± (intersection) 2-M4 0.7( ) 2-M 0.5( ) () ( ) () 1.2( ) (9.4) φ4.± ± ±0.1 R2MAX R2MAX Recommended panel dimensions for attaching panel shell from panel s front side. 40.6±0. R2MAX 16.6± ±0. R2MAX.2±0. PQ50-20S-FL pcs/box 28.4±0. R2MAX PQ50-20S-FL(01) piece/box 51.5±0.1 Recommended panel dimensions for attaching panel shell from panel s back side. Cable Plug PQ50 Series Crimp case (19 A/pin, for male contact) (P=4.6) (P=6.2) (48.8) PQ50-20P pcs/box PQ50-20P(01) piece/box Cover case JIS B 1188 M (16) M4 0.7 M M PQ50-20P-PC pcs/box PQ50-20P-PC(01) piece/box R12.5 8

9 φ4. H G F E D C B A A B C D E F G H PQ50S-48P PQ Series High Power/Signal Connectors for Industrial Machinery In-Line Cable Plug PQ50 Series In-line Cover case 2 JIS B 1188 M M4 0.7 (16) 42.8 φ4. M M PQ50-20S-JC pcs/box PQ50-20S-JC(01) piece/box R12.5 In-line Cover case PQ50-20S-DS pcs/box PQ50-20S-DS(01) piece/box Cable Plug PQ50S Series Crimp case (12.5 A/pin, for male contact) (P=.75) (P=.85) PQ50S-48P pcs/box PQ50S-48P(01) piece/box (55.8) Cover case JIS B 1188 M M4 0.7 (16) 50 M M PQ50S-48P-PCM pcs/box PQ50S-48P-PCM(01) piece/box R12.5 9

10 H G F E PQ50S-48S D C B A PQ Series High Power/Signal Connectors for Industrial Machinery Panel mount receptacle PQ50S Series Crimp cace (12.5 A/pin, for female contact) P= P= (46.4) Panel Shell Clamp metal common for PQ50 and PQ50S Series Clamp metal for Ø15.0mm cable type 7.16 JIS B 1188 M M (intersection) (12) Clamp metal for Ø22.0mm cable type 7.16 JIS B 1188 M M4 0.7 (12) PQ50S-48S pcs/box PQ50S-48S(01) piece/box 58.5± ±0. R2 MAX 2-M 0.7 (through hole) 16.6± ±0..2±0. PQ50S-48S-FLM pcs/box PQ50S-48S-FLM(01) piece/box 21.8 (intersection) M (intersection) (intersection) (intersection) 14.8 (intersection) φ4.±0.2 R2 MAX 58.5± ±0. 6.±0. R2 MAX Recommended panel dimensions for attaching panel shell from panel s front side. R2 MAX R2 MAX 16.6±0.1 R2 MAX 22.8±0..2±0. Recommended panel dimensions for attaching panel shell from panel s back side. PQ-CM(15.0) pcs/box PQ-CM(15.0)(01) piece/box PQ-CM(22.0) pcs/box PQ-CM(22.0)(01) piece/box

11 PQ Series High Power/Signal Connectors for Industrial Machinery No.E1 No.A Cable Plug PQ50W Series Crimp case (12.5A/pin, for male contact) PQ50WS-25P-UNIT piece/box Crimp case (12.5 A/pin, for female contact) No.E5 No.A5 PQ50WS-25S-UNIT piece/box Panel mount receptacle PQ50W Series Panel Shell (102) (5) (28) (6.) PQ50W PQ50W-50-FL piece/box 58.8±0.1 R2.5MAX 50± ± ±0.1 4-M (through hole) Panel dimensions for attaching panel shell from panel s front side. 11

12 Cable Plug PQ50W Series Cover Case (2.45) PQ50W-50-PC piece/box PQ50W Metal Cable Clamp for PQ50W Series Cable clamp for Ø17.5 mm cable type () 4 PQW-CM(17.5) piece/box 12

13 Crimp Contacts Male contact (19 A/pin type) PQ50-**PC*A PQ50A-**PC*A Applicable Cables PQ50-15PCFA(Note) ,500 pcs/reel AWG#14~15, insulator outer diameter max. Ø. mm PQ50A-15PCFA ,500 pcs/reel AWG#14~15, insulator outer diameter max. Ø. mm PQ PCFA ,500 pcs/reel AWG#16~18 (UL1007, UL1015), insulator outer diameter max. Ø. mm PQ50A-1618PCFA ,500 pcs/reel AWG#16~18 (UL1007, UL1015), insulator outer diameter max. Ø. mm PQ PCFA ,500 pcs/reel AWG#20~22 (UL1007, UL1015), insulator outer diameter max. Ø2.7 mm PQ50A-2022PCFA ,500 pcs/reel AWG#20~22 (UL1007, UL1015), insulator outer diameter max. Ø2.7 mm PQ50-15PCA pcs/pack AWG#14~15, insulator outer diameter max. Ø. mm PQ50A-15PCA pcs/pack AWG#14~15, insulator outer diameter max. Ø. mm PQ PCA pcs/pack AWG#16~18 (UL1007, UL1015), insulator outer diameter max. Ø. mm PQ50A-1618PCA pcs/pack AWG#16~18 (UL1007, UL1015), insulator outer diameter max. Ø. mm PQ PCA pcs/pack AWG#20~22 (UL1007, UL1015), insulator outer diameter max. Ø2.7 mm PQ50A-2022PCA pcs/pack AWG#20~22 (UL1007, UL1015), insulator outer diameter max. Ø2.7 mm Note: Applicable wire is AWG#14~15. Insulation diameter Ø.0mm max. When crimping AWG#14(UL1015 Ø.80mm), due to the design of insulation barrel, the shape of crimp does not cover insulation. It does not affect the product quality. Refer to ATAI-E-2926 for crimp quality standards. Female contact (19 A/pin) type Applicable Cables PQ50-15SCFA(Note) ,500 pcs/reel AWG#14~15, insulator outer diameter max. Ø. mm PQ SCFA ,500 pcs/reel AWG#14~15 (UL1007, UL1015), insulator outer diameter max. Ø. mm PQ SCFA ,500 pcs/reel AWG#20~22 (UL1007, UL1015), insulator outer diameter max. Ø2.7 mm PQ50-15SCA pcs/pack AWG#14~15 (UL1007, UL1015), insulator outer diameter max. Ø. mm PQ SCA pcs/pack AWG#16~18 (UL1007, UL1015), insulator outer diameter max. Ø. mm PQ SCA pcs/pack AWG#20~22 (UL1007, UL1015), insulator outer diameter max. Ø2.7 mm Note: Applicable wire is AWG#14~15. Insulation diameter Ø.0mm max. When crimping AWG#14(UL1015 Ø.80mm), due to the design of insulation barrel, the shape of crimp does not cover insulation. It does not affect the product quality. Refer to ATAI-E-2926 for crimp quality standards. 1

14 Crimp Contacts Male contact (12.5 A/pin type) PQ50S-****PC*A PQ50SA-****PC*A 1822P 1822P Applicable Cables PQ50S -1822PCFA ,000 pcs/reel AWG#17~22 (UL1007), insulator outer diameter max. Ø2.25 mm PQ50SA-1822PCFA ,000 pcs/reel AWG#17~22 (UL1007), insulator outer diameter max. Ø2.25 mm PQ50S -2428PCFA ,000 pcs/reel AWG#2~28 (UL1007), insulator outer diameter max. Ø1.8 mm PQ50SA-2428PCFA ,000 pcs/reel AWG#2~28 (UL1007), insulator outer diameter max. Ø1.8 mm PQ50S -1822PCA pcs/pack AWG#17~22 (UL1007), insulator outer diameter max. Ø2.25 mm PQ50SA-1822PCA pcs/pack AWG#17~22 (UL1007), insulator outer diameter max. Ø2.25 mm PQ50S -2428PCA pcs/pack AWG#2~28 (UL1007), insulator outer diameter max. Ø1.8 mm PQ50SA-2428PCA pcs/pack AWG#2~28 (UL1007), insulator outer diameter max. Ø1.8 mm Female contact (12.5 A/pin type) S Applicable Cables PQ50S-1822SCFA ,000 pcs/reel AWG#17~22 (UL1007), insulator outer diameter max. Ø2.25 mm PQ50S-2428SCFA ,000 pcs/reel AWG#2~28 (UL1007), insulator outer diameter max. Ø1.8 mm PQ50S-1822SCA pcs/pack AWG#17~22 (UL1007), insulator outer diameter max. Ø2.25 mm PQ50S-2428SCA pcs/pack AWG#2~28 (UL1007), insulator outer diameter max. Ø1.8 mm 14

15 Coding Key System For 19 A/pin type crimp case PQ50-SC-KY pcs/pack For 12.5 A/pin type crimp case PQ50S-SC-KY pcs/pack Contact Extraction Tools For 19 A/pin type crimp housing 80 PQ50/RE-MD Ø7 PQ50/RE-MD piece/box For 12.5 A/pin type crimp housing 75 PQ50S/RE-MD Ø10 PQ50S/RE-MD piece/box 15

16 Hand Crimp Tool The complete hand tool with crimper frame (1) is available for each terminal and wire gauge. Parts (2) to (8) can be ordered to accommodate repairs and to be able to switch to other wire gauges without having to purchase another complete tool. Crimper Frame Part No. HRS No. HT Switch wire crimper and insulation crimper die according to the wire size being used. qcrimper Frame * Unit Name Upper row: Part No. Lower row: HRS No. Applicable Contacts Applicable Cables UL AWG wic (Insulation Crimper) PQ (1007) PQ (1015) PQ PCA PQ SCA UL1007 UL (61) (61) PQ50A-1618(1007) PQ50A-1618(1015) PQ PCA PQ50A-1618PCA UL1007 UL (61) (61) PQ (1007) PQ (1015) PQ PCA PQ SCA UL1007 UL (61) (61) HT PQ50A-2022(1007) PQ50A-2022(1015) PQ PCA PQ50A-2022PCA UL1007 UL (61) (61) PQ50-14(1015) PQ50-15PCA PQ50-15SCA UL (61) PQ50A-14(1015) PQ50-15PCA PQ50A-15PCA UL (61) PQ50S-1820(1007) PQ50S-2022(1007) PQ50SA-1820(1007) PQ50SA-2022(1007) PQ50S-1822PCA PQ50S-1822SCA PQ50SA-1822PCA UL1007 UL (61) (61) (61) (61) Ex.: When unit PQ (1007) is purchased as a whole, all of parts (2) through (8) are included. If the insulation crimper (IC) only is needed for PQ (1007), then CL should be ordered. 16

17 Upper row: Part No. / Lower row: HRS No. ewc (Wire Crimper) ria (Insulation Anvil) twa (Wire Anvil) ycontact Holder A ucontact Holder B/C icrimper Spacer (62) (62) (62) (62) (62) (62) (62) (62) (62) (62) (62) (62) (62) (62) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (64) (64) (64) (64) (64) (64) (64) (64) (64) (64) (64) (64) (64) (64) (65) (65) (65) (65) (65) (65) (65) (65) (65) (65) (65) (65) (65) (65) (66) (66) (66) (66) (66) (66) (66) (66) (66) (66) (66) (66) (66) (66) (67) (67) (67) (67) (67) (67) (67) (67) (67) (67) (67) (67) (67) (67) 17

18 MEMO : 18

19 MEMO : 19

20 USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS 2688 Westhills Court, Simi Valley, CA Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE 255 Scott Boulevard, Building 7, Suite 101 Santa Clara, CA Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE 580 Waters Edge Lane, Suite 205 Lombard IL Phone : Mail : USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) Laurel Office Park III Laurel Park Drive Suite 25 Livonia, MI Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE Muggenhofer Str Nuernberg Phone : Fax : THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg # CC Amsterdam Z-O Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr., Haus C 0855 Langenhagen, Germany Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Herzog-Carl-Strasse 4 D-7760 Ostfildern (Scharnhauser Park) Phone : Fax : FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Regus La Garenne Colombes,Place de La Belgique, 71 Boulevard National La Garenne Colombes, 92250, France Phone : + (0) Fax : + (1) UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NH Phone : Fax : CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 1601, Henderson Metropolitan, NO.00, East Nanjing Road, Huangpu District, Shanghai, China Phone : Fax : CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, Phone : Fax : CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-1, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, Phone : Fax : KOREA: HIROSE KOREA CO., LTD , Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : ,7124 Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No.0, Ground Floor, Explorer Building International Tech Park Whitefield Road, Bangalore Karnataka, India Phone : Fax : HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : Fax : SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD. 10 Anson Road #26-1, International Plaza 07990, Singapore Phone : Fax : MALAYSIA: HIROSE ELECTRIC SINGAPORE PTE. LTD , Penang Cybercity (1164),Lintang Mayang Pasir,11950, Bayan Baru, Penang, Malaysia. Phone : Fax : TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 10 8F, No.87, Zhengzhou Rd., Taipei Phone : Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE Office NO.519, Regus-Green Boulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 20101, Uttar Pradesh, India Phone : Fax : THAILAND: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 470, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok Thailand Phone : Fax : ,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 1/2015. Contents are subject to change without notice for the purpose of improvements.

21 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: PQ SCFA PQ50A-1618PCFA PQ50-15SCFA

High Voltage Wire-to-Board Connectors

High Voltage Wire-to-Board Connectors High Voltage Wire-to-Board Connectors MDF51 Series Simple and secure mating with one push Socket Header Lock Fig.1 Features Secure hold during the soldering operation 1. Simple, one step mating Built-in

More information

Waterproof Connectors for Outdoor Use

Waterproof Connectors for Outdoor Use Waterproof Connectors for Outdoor Use HR41 Series Bayonet Lock Mating Mark Features 1. Waterproof connector designed for outdoor use Light weight, waterproof connector designed to withstand outdoor environments.

More information

0.8mm Pitch, Compact and Robust Wire-to-Board Connectors

0.8mm Pitch, Compact and Robust Wire-to-Board Connectors 0.8mm Pitch, Compact and Robust Wire-to-Board Connectors DF52 Series Small and robust structure Board side Cable side Thick wall parts Thick wall parts Features 1. Small-sized connector 0.8mm Pitch, 1.75mm

More information

0.3mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors

0.3mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors 0.3mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors DF56 Series High contact reliability Features 1.Small mated height and board occupied space Small pitch (0.3mm) and mated height (1.25mm)

More information

0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors 0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH34SRJ Series 3.8mm Depth Features 1. Low-profile With the

More information

Low Profile Swing-Lock Board to Wire Connector for Power

Low Profile Swing-Lock Board to Wire Connector for Power Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing

More information

Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply

Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector

More information

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) 7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent

More information

Low Profile Connectors for AC power supply

Low Profile Connectors for AC power supply Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation

More information

Waterproof Circular Connectors

Waterproof Circular Connectors Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16

More information

Power Supply Connectors For Industrial Equipment

Power Supply Connectors For Industrial Equipment ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

High speed transmission, 1mm pitch Small Interface Connector

High speed transmission, 1mm pitch Small Interface Connector NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together

More information

2.5mm Pitch Connector for Full Lock and Discrete Wire Connection

2.5mm Pitch Connector for Full Lock and Discrete Wire Connection 2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.

More information

Creative Links to World Electronics

Creative Links to World Electronics Interconnect Solutions for Lighting Creative Links to World Electronics Hirose Wire-to-Board Connectors Hirose s interconnect products offer innovation, versatility and low profiles for your LED engineered

More information

High speed transmission, 1mm pitch Small Interface Connector

High speed transmission, 1mm pitch Small Interface Connector NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together

More information

SC05 E-04. AC Inlets Power Supply Connectors

SC05 E-04. AC Inlets Power Supply Connectors ELECT R O N I C COMPONENTS SC0 E-0 AC Inlets Power Supply Connectors Contents Contents... AC Inlets AC Inlets... AC Inlets (for Lead Wire)... Power Supply Connectors Low-Profile Type Poles... 6 Poles...

More information

New Connectors For Low Profile Power Supply

New Connectors For Low Profile Power Supply NEW New Connectors For Low Profile Power Supply RP34L Series Receptacle installed height RP34L Existing RP34 (3-contact type) (2-contact type) Fig.-➀ Features 1. Low profile: These receptacles are designed

More information

1mm Pitch Cable-to-Board Connectors supporting LVDS signal

1mm Pitch Cable-to-Board Connectors supporting LVDS signal NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:

More information

1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors

1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB

More information

0.5mm Pitch SMT Board to Board Connector

0.5mm Pitch SMT Board to Board Connector All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

SLN08 B-01. DC Solenoids

SLN08 B-01. DC Solenoids ELECT R O N IC COMPO NENTS SLN08 B-01 DC Solenoids Contents & Features Index & DC Solenoids Features... 1 Solenoid Specifications... 2 Product List... 3 How to Select Solenoids... 4-5 DC Solenoids (PM

More information

Amphenol-Tuchel Electronics 44 Series

Amphenol-Tuchel Electronics 44 Series 44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.

More information

DC to 6GHz Ultra-Small Coaxial Switch

DC to 6GHz Ultra-Small Coaxial Switch DC to 6Hz Ultra-Small Coaxial Switch MS-147 Series Outline The ultra-small MS-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (substrates)

More information

0.5mm Pitch SMT Board-to-Board Connector

0.5mm Pitch SMT Board-to-Board Connector 0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of

More information

Circuit Protectors TBC05 E-03

Circuit Protectors TBC05 E-03 Circuit Protectors TBC05 E-03 Contents Contents 1 Notice 1 Specifications ist 2 Example of Used 3 TBC5000 Series Manual Reset Type and Auto Reset Type 4 12 TBC6000 Series Manual Reset Type 13 17 Notice

More information

D-Subminiature EMI/RFI Shielding Interconnection Systems

D-Subminiature EMI/RFI Shielding Interconnection Systems Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS

More information

PARALLEL PROCESSING UPS E33A

PARALLEL PROCESSING UPS E33A PARALLEL PROCESSING UPS E33A Low energy, high quality, high reliability parallel processing type UPS E33A Supporting network PARALLEL PROCESSING UPS Parallel operation backup time Input AC380, 400, 415,

More information

2SS/2S1/2SM SUB-MINIATURE TOGGLES

2SS/2S1/2SM SUB-MINIATURE TOGGLES 2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the

More information

0.5mm and 1mm Pitch FPC/FFC Connectors

0.5mm and 1mm Pitch FPC/FFC Connectors 0.5mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear

More information

HV HV Series Connector and cable assembly

HV HV Series Connector and cable assembly Amphenol Amphenol PCD Shenzhen HV HV Series Connector and cable assembly www.amphenolpcd.com.cn CONTENT HV Series connector and cable assembly PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE.........

More information

DATA-CON-X : SEALED USB TYPE A & B CONNECTORS

DATA-CON-X : SEALED USB TYPE A & B CONNECTORS FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or

More information

Delphi Harsh Environment Series (HES) Connection Systems

Delphi Harsh Environment Series (HES) Connection Systems The Delphi Harsh Environment Series (HES) include circular connectors, terminals, and a J1939 diagnostic circular connector. The 24 shell size industry standard connector includes six terminal configurations

More information

ECONOMY POWER 2.5 CONNECTORS

ECONOMY POWER 2.5 CONNECTORS ECONOMY POWER 2.5 CONNECTORS The Economy Power 2.5 (EP 2.5) connector is a single row or dual row crimp connector system. Based on a 2.5mm (0.098 ) centerline pitch, it is a very compact solution. EP 2.5

More information

ø22mm XW Series Emergency Stop Switches (Mechanical Indicator) Smooth Button Delivers Style and Cleanliness

ø22mm XW Series Emergency Stop Switches (Mechanical Indicator) Smooth Button Delivers Style and Cleanliness ø22mm XW Series Emergency Stop Switches (Mechanical Indicator) Normal/latched status can be checked from a distance with the mechanical indicator function. The smooth ridgeless button prevents dust build-up

More information

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min

More information

MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708

MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708 FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to

More information

Mini USB and USB 2.0-IP67 Connector System

Mini USB and USB 2.0-IP67 Connector System Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet

More information

Insulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters.

Insulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters. Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 18 mm Insulator Connector inserts: Polyamide

More information

about us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.

about us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group. table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts

More information

BD-SERIES. BD-Series BATTERY DISCONNECT POWER SWITCH. Resources: Typical Applications: Product Highlights:

BD-SERIES. BD-Series BATTERY DISCONNECT POWER SWITCH. Resources: Typical Applications: Product Highlights: BD-SERIES BD-Series BATTERY DISCONNECT POWER SWITCH Carling Technologies BD-Series battery disconnect switch is designed to minimize battery drain, ensure maintenance personnel safety, and when used in

More information

Amphenol 97 Series MIL-DTL-5015

Amphenol 97 Series MIL-DTL-5015 Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.

More information

Applications R47 5 I M

Applications R47 5 I M R47 Series, Class X2, 520 VAC, 85ºC (Automotive Grade) Overview The R47 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the

More information

0.5 mm and 1 mm Pitch FPC/FFC Connectors

0.5 mm and 1 mm Pitch FPC/FFC Connectors 0.5 mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear

More information

Installation Manual. YASKAWA AC Drive Option Back-up Capacitor Unit for Momentary Power Loss. Type: P0010, P0020

Installation Manual. YASKAWA AC Drive Option Back-up Capacitor Unit for Momentary Power Loss. Type: P0010, P0020 YASKAWA AC Drive Option Back-up Capacir Unit for Momentary Power Loss Installation Manual Type: P0010, P0020 To properly use the product, read this manual thoroughly and retain for easy reference, inspection,

More information

MMC RTX series EN3716

MMC RTX series EN3716 MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products

More information

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.

More information

DT Series Technical Manual

DT Series Technical Manual Deutsch Industrial UK Stanier Road St. Leonards On Sea East Sussex TN 9RF England Ph. (0) 7 Fax (0) 979 industrialuk@deutsch.net Deutsch Industrial Europe Fraunhoferstrasse b Martinsried Germany Ph. +9

More information

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.

More information

Wedge in Plugs Stock No

Wedge in Plugs Stock No Amphenol Connectors Description Plugs Stock No. Receptacles Stock No. 2-way 38170 38171 3-way 38172 38173 4-way 38174 38175 6-way 38176 38177 8-way 38178 38179 12-way 38180 38181 Wedge in Plugs Stock No.

More information

G-Series DIN-RAIL CIRCUIT BREAKER

G-Series DIN-RAIL CIRCUIT BREAKER G-Series DIN-RAIL CIRCUIT BREAKER The G-Series hydraulic-magnetic circuit breaker insures maximum protection by integrating wiping contacts for longevity; a common trip linkage between poles; a unique

More information

0.5 mm and 1 mm Pitch FPC/FFC Connectors

0.5 mm and 1 mm Pitch FPC/FFC Connectors 0.5 mm and mm Pitch FP/FF onnectors FH Series pr..0 opyright 0 HIROS LTRI O., LT. ll Rights Reserved. Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate

More information

Type N connectors DIVIDER PAGE

Type N connectors DIVIDER PAGE Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110

More information

Life PERFORMANCE Catalog listing Standards Structure Electrical performance Mechanical performance Ambient operating conditions Recommende tightening

Life PERFORMANCE Catalog listing Standards Structure Electrical performance Mechanical performance Ambient operating conditions Recommende tightening SPATTER-GUARDED SWITCHES Model LS Effective countermeasures against the adhesion of spatter. UL/CSA/GB(CCC marking)-approved. (excluding some models) ORDER GUIDE Actuator Name Roller lever type Shape Max.

More information

Connectors Type M DIN / IEC Catalog E /01 Edition 1

Connectors Type M DIN / IEC Catalog E /01 Edition 1 Connectors Type M DIN 41612 / IEC 60603-2 www.erni.com www.erni.com Contents General Information 3 Electrical & Mechanical Specifications for Connectors 4 Standard Male Connectors for Daughtercards 6 Standard

More information

HP20 Series. Utilizes a Small #20 Size Shell Accommodates Up to 646 MCM Cable Patents Pending

HP20 Series. Utilizes a Small #20 Size Shell Accommodates Up to 646 MCM Cable Patents Pending HP20 Series Utilizes a Small #20 Size Shell Accommodates Up to 646 MCM Cable Patents Pending RigPower s mission is to create new industry standards in industrial electrical connectors by combining appropriate

More information

American Standard ProAx Triaxial Camera Connectors Installation Instructions

American Standard ProAx Triaxial Camera Connectors Installation Instructions American Standard ProAx Triaxial Camera Connectors Installation Instructions Content Page INTRODUCTION............................................................................. 1 Revision History........................................................................

More information

SD Series. Cord and Light Reels. Engineered Solutions to Help you Work Smarter and Faster. Quality Cord and Light Reels

SD Series. Cord and Light Reels. Engineered Solutions to Help you Work Smarter and Faster. Quality Cord and Light Reels SD Series Cord and Light Reels Engineered Solutions to Help you Work Smarter and Faster Quality Cord and Light Reels Organize your work space for a safer, more productive work environment. Make Graco your

More information

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made

More information

J-Series CIRCUIT BREAKER

J-Series CIRCUIT BREAKER J-Series CIRCUIT BREAKER Designed to provide high levels of circuit protection, the J-Series is a compact, low profile hydraulic magnetic circuit breaker ideally suited for high power density applications.

More information

Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.

Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series

More information

MDM. Magnetic drive pumps Magnetic drive process pump resistant to dry run damage. Magnetic drive pumps. series

MDM. Magnetic drive pumps Magnetic drive process pump resistant to dry run damage. Magnetic drive pumps. series MDM series Magnetic drive pumps Magnetic drive process pump resistant to dry run damage Magnetic drive pumps The MDM Series of Magnetic drive process pumps have wetted parts made of fluororesin. Patent

More information

Capacitor Selection Guide High Temperature

Capacitor Selection Guide High Temperature Capacitor Selection Guide High Temperature 260 C 150 C Electronic Components EASY TO DESIGN IN Capacitor Simulation Tool ksim.kemet.com Made for Engineers by Engineers engineeringcenter.com Catalogs and

More information

mcx connectors DIVIDER PAGE

mcx connectors DIVIDER PAGE mcx connectors DIVIDER PAGE 207 mcx interface dimensions A REF. PLANE A REF. PLANE B B C C H D D ØF ØG ØG ØF ØE ØE,, Design in accordance with CECC 22220 male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM

More information

POLAMCO HIGH POWER CONNECTORS STYLE

POLAMCO HIGH POWER CONNECTORS STYLE POLAMCO HIGH POWER CONNECTORS 38999 STYLE Robust & reliable connectors designed for harsh environments Contents Part Description System... 4 Materials... 4 Plating Options... 5 SECTION ONE: Plugs 1.1 Shielded

More information

Hinged Safety Door Switch

Hinged Safety Door Switch Hinged Safety Door Switch Polymer housing, IP65, and slow-action contacts with positive opening. Two actuator types are available: Shaft Arm lever Arm lever type can be adjusted to allow a right (180 ),

More information

FAKRA-Compliant SMB Gen-4 Connector System

FAKRA-Compliant SMB Gen-4 Connector System FAKRA-Compliant SMB Gen-4 Connector System Application Specification 114-13157 25 MAR 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in

More information

Test Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy

Test Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy Test Probes Test Fixtures INGUN Test Fixtures Change made easy MA 350/F with customized ATS MA350 force up to 300 N up to 160 x 100 mm MA 3xx-series generous and free accessibility MA 360/F with customized

More information

Guide Ball Bushing NEW

Guide Ball Bushing NEW NEW Guide Ball Bushing Contributes to compact the system Achieves load rating more than twice the Linear Bushing with the same dimensions (model LG-S) Various combinations of nut and shaft are available

More information

Overview. Applications. Benefits. Part Number System. Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC

Overview. Applications. Benefits. Part Number System. Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC Overview KEMET S301 Series Supercapacitors utilize a proprietary electrode design to deliver a very high power density. This product

More information

(SQ) Ceramic Housed Cement Resistors. Token Electronics Industry Co., Ltd. Version: January 12, Web:

(SQ) Ceramic Housed Cement Resistors. Token Electronics Industry Co., Ltd. Version: January 12, Web: Version: January 12, 2017 (SQ) Ceramic Housed Cement Resistors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New

More information

Elevate the user experience with sleek and intuitive design

Elevate the user experience with sleek and intuitive design Elevate the user experience with sleek and intuitive design Aesthetic options for every project and price point. lutron.com/palladiom Understated elegance for where you work. Distinct character for where

More information

24kV/36kV Metal-Enclosed SF6 Gas Insulated Switchgear HICLAD 20GB/HICLAD 30GB

24kV/36kV Metal-Enclosed SF6 Gas Insulated Switchgear HICLAD 20GB/HICLAD 30GB 24kV/36kV Metal-Enclosed SF6 Gas Insulated Switchgear HICLAD 20GB/HICLAD 30GB Compact, reliable, and economic for medium-voltage applications Design Concept This switchgear conforms to IEC62271-200, and

More information

0.5mm and 1mm Pitch Connectors For FPC/FFC

0.5mm and 1mm Pitch Connectors For FPC/FFC ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

CMC Hybrid Connectors Standard and Power Versions

CMC Hybrid Connectors Standard and Power Versions CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications

More information

RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002

RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002 Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER

More information

YASKAWA AC DRIVES. Application Solution. Extruder. YASKAWA AC Drive GA700. YASKAWA Matrix Converter U1000

YASKAWA AC DRIVES. Application Solution. Extruder. YASKAWA AC Drive GA700. YASKAWA Matrix Converter U1000 YASKAWA AC DRIVES Application Solution Extruder YASKAWA AC Drive YASKAWA Matrix Converter For Extruder YASKAWA provides the answers to your extruder needs. YASKAWA ELECTRIC always stands in the shoes of

More information

2.92mm connectors DIVIDER PAGE

2.92mm connectors DIVIDER PAGE connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A

More information

Cost Effective Screw series

Cost Effective Screw series Cost Effective Screw series Ball Screws Compliant with the New Accuracy Standards New Series CES (Pronounced sees ) Simple-Nut Type BIF Double-Nut Type BNFN (build to order) Single-Nut Type BNF (build

More information

SELECTION GUIDE Example:PA-JSXHK-E PA- J SX HK-E Basic model number of wires Type shape PA- J I SX LX BX SB SN LB LN V1 0 0 HK-E SK CK *1. For lengths

SELECTION GUIDE Example:PA-JSXHK-E PA- J SX HK-E Basic model number of wires Type shape PA- J I SX LX BX SB SN LB LN V1 0 0 HK-E SK CK *1. For lengths with cable Model PA-mmm Simplifies switch wiring. Wide variety of connectors attached to cables. No wiring or staking work needed Shorter replacement time in unlikely event of switch malfunction Simultaneous

More information

SBK. High-Speed Caged Ball Screw Model SBK NEW. Achieves high-speed feed at 114 m/min With model SBK4030

SBK. High-Speed Caged Ball Screw Model SBK NEW. Achieves high-speed feed at 114 m/min With model SBK4030 NEW High-Speed Caged Ball Screw Model SBK Low noise, long-term maintenance-free operation High speed, high accuracy SBK DN value: 160,000 Achieves high-speed feed at 114 m/min With model SBK4030 For details,

More information

MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards

MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)

More information

LubePro Series Pumps. For Simple, Injector-Based Automatic Lubrication Systems. The Choice of Lubrication Professionals

LubePro Series Pumps. For Simple, Injector-Based Automatic Lubrication Systems. The Choice of Lubrication Professionals LubePro Series Pumps For Simple, Injector-Based Automatic Lubrication Systems The Choice of Lubrication Professionals As a hard-working professional focused on ensuring your production lines keep moving

More information

Electric Lowering & Raising System 20kg PRODUCT TYPE. Max. weight of light fitting Lowering distance. 4. Lamp circuits. No. of circuit No.

Electric Lowering & Raising System 20kg PRODUCT TYPE. Max. weight of light fitting Lowering distance. 4. Lamp circuits. No. of circuit No. Electric Lowering & Raising System The cost effective maintenance solution for luminaires FEATURES Designed for use of heavier weight light fittings. TYPICAL APPLICATIONS Workshops, Factories, Warehouses

More information

Established leaders in Actuation Technology. ROM & RBM Range 1/4 turn direct drive electric actuators. Publication E611E issue 10/02

Established leaders in Actuation Technology. ROM & RBM Range 1/4 turn direct drive electric actuators. Publication E611E issue 10/02 Established leaders in Actuation Technology ROM & RBM Range 1/4 turn direct drive electric actuators Publication E611E issue 10/02 Rotork Actuation Established Leaders in Actuation Technology As one of

More information

XA Series Emergency Stop Switches (w/removable Contact Block)

XA Series Emergency Stop Switches (w/removable Contact Block) XA ø6 XA Series Emergency Stop Switches (w/removable Contact Block) The World s First ø6 mm, 4-contact Emergency Stop Switch. Compact size - only 7.9 mm deep behind the panel. Reliable Safe break action.

More information

UB CONNECTOR. 1Certified LR USB (Universal Serial Bus) Conforming Connector. Features. Specifications. Standards

UB CONNECTOR. 1Certified LR USB (Universal Serial Bus) Conforming Connector. Features. Specifications. Standards USB (Universal Serial Bus) Conforming Connector Features Conforms to USB (Universal Serial Bus) standards This connector conforms to the USB standards, that stipulate the serial interface between PC's

More information

XW Series Emergency Stop Switches

XW Series Emergency Stop Switches ø ø mm, 4-contact Emergency Stop Switch. Compact size only 37. mm deep behind the panel (screw terminal type 4 mm with terminal cover). eliable Safe break action. The depth behind the panel is only 37.

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC 17021-1:2015 to provide health and safety management systems certification BSI Kitemark Court Davy Avenue Knowlhill Milton Keynes

More information

DC2-Wire Aluminum-Chip Resistant Cylindrical Proximity Sensors N.O. N.C. N.O. N.C. N.O. N.C. 8mm N.O. N.C. N.O. N.O. N.C. N.O. N.O. N.C.

DC2-Wire Aluminum-Chip Resistant Cylindrical Proximity Sensors N.O. N.C. N.O. N.C. N.O. N.C. 8mm N.O. N.C. N.O. N.O. N.C. N.O. N.O. N.C. DC-Wire Aluminum-Chip Resistant Cylindrical Proximity Sensors FL7M-ASeries Detects workpieces reliably even if aluminum or cast iron chips accumulate on the sensing head. DC-wire proximity sensors can

More information

CMC Hybrid Connectors Standard and Power Versions

CMC Hybrid Connectors Standard and Power Versions CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications

More information

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.

More information

DuraSeal Heat-Shrinkable Environmentally Sealed, Nylon Insulated Crimp Terminals and Disconnects

DuraSeal Heat-Shrinkable Environmentally Sealed, Nylon Insulated Crimp Terminals and Disconnects Sealed, Nylon Insulated Crimp Terminals and Disconnects Product Facts Resistance to moisture and abrasion Strain relief Protection from wire pull-out Easy installation UL and CUL listed R Approvals and

More information

Model A9GT-70LTTBW Back Light

Model A9GT-70LTTBW Back Light Model A9GT-70LTTBW Back Light User s Manual Thank you for purchasing the MELSEC-GOT Series. To ensure correct use of this equipment, please carefully read this manual prior to use. MODEL A9GT-70LTT-BW-U

More information

SP Series - Part Numbering

SP Series - Part Numbering SP Series - Part Numbering Features Push-pull self latching technology Ultra precision High contact density High reliability / durability High vibration and outer force resistance Applications Telecommunications

More information

Options for the Ball Screw QZ Lubricator Wiper Ring W

Options for the Ball Screw QZ Lubricator Wiper Ring W Options for the Ball Screw Lubricator Wiper Ring W CATALOG No.322-1E OPTIONS For Ball Screws, dust-prevention and lubrication accessories are available. You can make a selection according to the application

More information

RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification No. 3402/001

RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification No. 3402/001 Page 1 of 68 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification Issue 3 January 2014 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER

More information

(DQS) Rib-Wound Adjustable Resistors. Token Electronics Industry Co., Ltd. Version: January 12, Web:

(DQS) Rib-Wound Adjustable Resistors. Token Electronics Industry Co., Ltd. Version: January 12, Web: Version: January 12, 2017 (DQS) Rib-Wound Adjustable Resistors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New

More information

Dynamic Series Connectors

Dynamic Series Connectors 3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,

More information

FL7MSeries. DC2-Wire Regular Cylindrical Proximity Sensors

FL7MSeries. DC2-Wire Regular Cylindrical Proximity Sensors DC-Wire Regular Cylindrical Proximity Sensors FL7MSeries Rigid structure, highly waterproof DC -wire sensors with improved visibility of lamps. DC -wire, for reduced wiring costs. Stable sensing area is

More information