For Antenna. In-vehicle shielding connector with twin crimp technology. GT5 Series Connectors for coaxial cables ----

Size: px

Start display at page:

Download "For Antenna. In-vehicle shielding connector with twin crimp technology. GT5 Series Connectors for coaxial cables ----"

Ursula Lester
5 years ago
Views:

Patented GT In-vehicle shielding connector with twin crimp technology GT6 GT6 GT GT2 GT In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems, RACS

GT8W Applications GT0 USCAR specified connector as SAE/USCAR-9 Low cost cable assembly Highly efficient and reliable one step crimp termination "Twin Crimp TM " allows high volume production with

1 Patented GT In-vehicle shielding connector with twin crimp technology GT6 GT6 GT GT2 GT In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems, RACS antenna audio/video antenna systems, CRT displays, medical and measuring instrumentation, variety of communication equipment, office automation equipment, LAN systems. GT8W Applications GT0 USCAR specified connector as SAE/USCAR-9 Low cost cable assembly Highly efficient and reliable one step crimp termination "Twin Crimp TM " allows high volume production with semi-automatic equipment. Space-saving design Excellent high frequency performance Refer to V.S.W.R. data on the following pages. Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. GT2 <In-line, board mounted, combinations of coaxial cable with signal/power, Waterproof type.> ---- Connectors for coaxial cables ---- Series

2 B Test Data (Using.D-2V Type cable) GT6 GT Series High Frequency Characteristics (V.S.W.R.) GT GT GHZ B Termination sequence. Insert the terminal in the housing until fully locked. Push in the terminal with cable in the housing until the housing lance locked.. Strip the cable. 9. GT8W GT0 GT GT2 GT Note : Typical data using fully assemblied and connected -S-HU and the -PP-HU. Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved Crimp the cable to the terminal. 4. Fully insert the retainer. Push in the retainer until locked.

Series A GT6 4.6 F Connector Terminals GT.8 4.6 Terminals for coaxial cable Ø2.0 to 2. Ø. to. Ø.6 to 4.0 0 AWG 24 to 28 AWG 20 to 22 AWG 0 AWG 24 to 28 AWG 20 to 22 AWG Ø2. to 2.9,00 pcs/reel 22.

0 0 AWG 24 to 28 AWG 20 to 22 AWG 0 AWG 24 to 28 AWG 20 to 22 AWG Ø2. to 2.9 900 pcs/reel 900 pcs/reel 24.0 Ø4.6 to.0 Ø.0 to.6 GT8W Ø. to 2.0 Ø2.6 to.4 2.

3 Series A GT6 4.6 F Connector Terminals GT Terminals for coaxial cable Ø2.0 to 2. Ø. to. Ø.6 to AWG 24 to 28 AWG 20 to 22 AWG 0 AWG 24 to 28 AWG 20 to 22 AWG Ø2. to 2.9,00 pcs/reel 22.,00 pcs/reel Ø4.6 to.0 Ø.0 to.6 GT6 Note : Products marked with an asterisk (*) indicate polyethylene foam insulation. A.8 Terminals for M Connector GT.8 GT2 20 to 22 AWG Ø2.0 to 2. Ø. to. Ø.6 to AWG 24 to 28 AWG 20 to 22 AWG 0 AWG 24 to 28 AWG 20 to 22 AWG Ø2. to pcs/reel 900 pcs/reel 24.0 Ø4.6 to.0 Ø.0 to.6 GT8W Ø. to 2.0 Ø2.6 to Note : Products marked with an asterisk (*) indicate polyethylene foam insulation. A Terminals for Low-insertion M Connector.8 24 to 28 AWG GT Insulator Dark Gray Center terminal Brass Outer terminal Brass Insulation Conductor Size (AWG) Inner Diameter Outer Diameter A Ø0.6 to 0.9 Ø.4 to AWG.8 or -0/0.-.PCF(0) -0/.6-2.9PCF(0) -2428/.6-2.9PCF(0) -2022/.6-2.9PCF(0) -2022/F2.-.PCF(0) -2022/F.-.8PCF(0) -0/F.-PCF(0) -2428/F.-PCF(0) -2022/F.-PCF(0) -0/F4-PCF(0) -2428/F4-PCF(0) -2022/F4-PCF(0) GT Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 20 to 22 AWG Insulator Dark Gray Center terminal Phosphor bronze Outer terminal Brass Insulation Conductor Size (AWG) Inner Diameter Outer Diameter A Ø0.6 to 0.9 Ø.4 to AWG Ø.0 to.4 Ø2.0 to to 28 AWG Ø2. to 2. 0 AWG 2. Ø. to 2.0 Ø2.6 to.4 24 to 28 AWG GT2 or -0/0.-.SCF(0) -2428/.-2.2SCF -2428/.6-2.SCF(0) -0/.6-2.9SCF(0) -2428/.6-2.9SCF(0) -2022/.6-2.9SCF(0) -2022/F2.-.SCF(0) -2022/F.-.8SCF(0) -0/F.-SCF(0) -2428/F.-SCF(0) -2022/F.-SCF(0) -0/F4-SCF(0) -2428/F4-SCF(0) -2022/F4-SCF(0) or Insulator Dark Gray Center terminal Brass Outer terminal Brass Insulation Conductor Size (AWG) Inner Diameter Outer Diameter A Ø0.6 to 0.9 Ø.4 to Ø2. to 2. Ø. to Ø2.6 to.4 0 AWG 24 to 28 AWG 0 AWG 24 to 28 AWG L-0/0.-.PCF(0) L-2428/.6-2.PCF(0) L-0/.6-2.9PCF(0) L-2428/.6-2.9PCF(0) 9

-PP-HU(0) -PP-HU(C)(0) C Corresponding M Connector Assembly- Board Mounting -P-DS(0) -P-DS(0) -P-DS(0) -P-DS(C)(0) GT GT 2.8.8 GT2 4.

4 9.6 Pos. for coaxial cable Housings. F Connectors GT2 GT6 -S-HU -S-HU -S-HU -S-HU(C) Light Gray Brown Green Blue Key polarizing Corresponding M Connector code Housing- In-line Standard -PP-HU(0) -PP-HU(0) -PP-HU(0) -PP-HU(C)(0) C Corresponding M Connector Assembly- Board Mounting -P-DS(0) -P-DS(0) -P-DS(0) -P-DS(C)(0) GT GT GT P/S-R Dark Gray GT0 (C) *Used with separate retainer (-P/S-R), which is sold separately. 9.6 Housing (Retainer is not required) GT8W -S-HU Retainer (Used with : -S-HU, -PP-HU, N-PP-HU, H-PP-HU) R-S-HU.2. R-S-HU 26. *Mating Table(M Connectors) Prease use a matching key tipe. 0 Standard BShown with inserted retainer. Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT6 GT Series Light Gray

mounting in-line bracket. Note 2 : Please use a mating F connector housing of a matching key type. *Used with separate retainer (-P/S-R), which is sold separately.

5 Series M Connectors 4.8 GT Housings (C).4 Mounting bracket attachment side BShown with inserted retainer.. Corresponding F Key polarizing Connector Housing code -S-HU Light Gray Standard Housing Brown -S-HU Ground terminal Phosphor bronze Green -S-HU -S-HU C Blue C GT6 Note : Refer to pages 2 for panel mounting in-line bracket. Note 2 : Please use a mating F connector housing of a matching key type. *Used with separate retainer (-P/S-R), which is sold separately. GT Housings (For use with H type mounting bracket) BMated condition S-HU. *Used with separate retainer (-P/S-R), which is sold separately. H-PP-HU(0) Corresponding F Connector Housing -S-HU Light Gray R-S-HU GT GT0 Housing (For use with N type mounting bracket) BMated condition S-HU -P/S-R Corresponding F Connector Housing -S-HU Light Gray R-S-HU N-PP-HU *Used with separate retainer (-P/S-R), which is sold separately. -P/S-R N-PP-HU GT8W 0 0 GT2 -P/S-R -P/S-R. H-PP-HU GT2 -PP-HU(0) -PP-HU(0) -PP-HU(0) -PP-HU(C)(0) Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Ground terminal Standard GT6 0

Housings mounting, [ Panel enhanced shielding type ] BRecommended Panel Cut-out GT6 GT Series 9 0.4.6 M.8 0 2-φ. 4 BMated condition (mounted).4 Panel thickness.

6 Housings mounting, [ Panel enhanced shielding type ] BRecommended Panel Cut-out GT6 GT Series M φ. 4 BMated condition (mounted).4 Panel thickness.4 GT6 Note 2 or A-PP-HU(0) Housing Light Gray Ground terminal Brass -P/S-R. Corresponding F Connector Housing -S-HU R-S-HU Note : Retainer is not required. Note 2 : Use JIS B and 0 M screws for the mounting screws. GT -S-HU 6.2 GT M φ..8 GT GT2 BRecommended Panel Cut-out 0 GT8W GT Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 4 2 or P-PP-HU(0) Housing Light Gray Ground terminal Brass Note : Retainer is not required. Note 2 : Use JIS B and 0 M screws for the mounting screws. Corresponding F Connector Housing -S-HU R-S-HU 0.4

Note 2 : Use JIS B and 22 class 4, nominal diameter, length 6 screws for the mounting screws..8 2.8 26 2.6 0 GT2 2.4 2. -S-HU -P/S-R. 8. 9 GT8W 4.2 GT0.4 4 2.6 Chassis Assembly Diagram.

7 Series GT S-HU GT2 9 or B-PP-HU(0) Housing Light Gray Ground terminal Phosphor bronze Corresponding F Connector Housing -S-HU R-S-HU GT GT6 Note : Retainer is not required. Note 2 : Use JIS B and 22 class 4, nominal diameter, length 6 screws for the mounting screws GT S-HU -P/S-R GT8W 4.2 GT Chassis Assembly Diagram.6 GT Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved..2 or S-PP-HU(0) Housing Light Gray Ground terminal Phosphor bronze Corresponding F Connector Housing -S-HU R-S-HU Note : Retainer is not required. Note 2 : Use JIS B and 22 class 4, nominal diameter, length 6 screws for the mounting screws. Chassis Assembly Diagram.2 -P/S-R 2.6 GT

Standard (C) BMated condition GT2 2. 2. BRecommended PCB Mounting Pattern.4

8 Board Mounting Type Standard (C) BMated condition GT BRecommended PCB Mounting Pattern.4 -S-HU -P-DS P-DS(0) -P-DS(0) -P-DS(0) -P-DS(C)(0) Key polarizing code Housing ー Light Gray Standard Center terminal Brass Brown Insulator Dark Gray Green Outer terminal Phosphor bronze Blue C or..4 For center terminal φ.2 -P/S-R. For outer terminal 2-φ.2 Note.2 Panel Corresponding F Connector Housing -S-HU -S-HU -S-HU -S-HU(C) Note : Use JIS B and 22 class 4, nominal diameter, length 6 screws (for a board thickness of.6 mm) for the mounting screws. Note 2 : Please use a mating F connector housing of a matching key type. GT2 GT GT6 T=.6 2-φ GT 2. BMated condition E-P-DS() -S-HU -P/S-R or -0- Housing PA Natural Center terminal Brass Insulator PA Black Outer terminal Phosphor bronze Fixing pin Brass Corresponding F Connector Housing -S-HU R-S-HU For center terminal Ø.2 For fixing pin Ø..0.6 For outer terminal 2 Ø.2. BRecommended PCB Mounting Pattern EC-P-DS() T=.6 GT0 GT8W Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT φ GT Series Panel

9 Series Pos. for coaxial cable 2 coaxial type 6.6 GT F Connectors Housing.2. GT2-2P/S-R BShown with inserted retainer Light Gray Brown Green Blue Key polarizing code Standard C GT6-2S-HU -2S-HU -2S-HU -2S-HU(C) Note : Assemble main parts with separate retainer (-2P/S-R). Note 2 : Please use a mating F connector housing of a matching key type. GT M Connectors BRecommended Mounting Bracket dimensions S-HU -2P/S-R -2P/S-R -2PP-HU(0) -2PP-HU(0) -2PP-HU(0) -2PP-HU(C)(0) Housing Ground terminal Phosphor bronze Note : Assemble main parts with separate retainer (-2P/S-R). Note 2 : Please use a mating F connector housing of a matching key type. Key polarizing code Light Gray Standard Brown Green Blue C (C).. GT8W.2.4 GT0 BMated condition Standard 0 GT. GT2 4.min 2.8 Housings[Panel Mounted Housing] Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (C) GT6 Standard

Series Housings GT BMated condition 4.4.4 GT2-2P/S-R -2P/S-R.8 6.2 GT6 0. N-2PP-HU -00-8 Light Gray. Note : Assemble main parts with separated retainer (-2P/S-R).

2 2-R.2 2-R.6 8.2 0. R R 22.4 2-9.2 4.0 0. 20.2 9.2 GT8W 4.0 0. 0. R 2-0. R 2-.4-2S-HU -2P/S-R 22.4 GT0 For outside conductor 4-φ.2.4 2. 2. 2.6 T-.6 2. Board BMated condition (mounted) 22.4.4 (C).

10 Series Housings GT BMated condition GT2-2P/S-R -2P/S-R GT6 0. N-2PP-HU Light Gray. Note : Assemble main parts with separated retainer (-2P/S-R). Retainer (Used with -2S-HU, -2PP-HU, and N-2PP-HU) GT 2.8 GT P/S-R Dark Gray Board Mounting Type Board d R.2.6 R R2 Board R.2 2-R R R GT8W R 2-0. R S-HU -2P/S-R 22.4 GT0 For outside conductor 4-φ T Board BMated condition (mounted) (C).. Panel 2-φ. For inner conductor 2-φ BRecommended Board Mounting Pattern Standard GT 22.4 GT2 2-φ 22.4 Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. -2S-HU 8.8-2P-DS (0) -2P-DS (0) -2P-DS (0) -2P-DS (C)(0) Recommended Panel Cut-out -2P-DS(0) P-DS(0) P-DS(0) P-DS(C)(0) or Housing ー Center terminal Brass Insulator Dark Gray Outer terminal Phosphor bronze Note : Housing. Note 2 : Use JIS B and 22 class 4, nominal diameter, length 6 screws. Key polarizing code Light Gray Standard Brown Green Blue C

11 Series Terminals for Power Supply GT Terminals for F Connector 2.8 GT GT2 Conductor Size (AWG) 20 to 22 AWG Outer Diameter Ø.4 to 2.4 Ø2.6 to.,000 pcs/reel,000 pcs/reel Note : Sold in reel. (See above table for number of.) Note 2 : This component is used only with applicable HRS housings. GT Copper alloy GT6 Terminals for M Connector GT GT GT0 20. Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT8W Brass Conductor Size (AWG) 20 to 22 AWG Outer Diameter Ø.4 to 2.4 Ø2.6 to.,000 pcs/reel,000 pcs/reel -2022PCF(0) A-2022PCF(0) Note : Sold in reel. (See above table for number of.) Note 2 : This component is used only with applicable HRS housings SCF(0) A-2022SCF(0)

GT Series Combinaton Type (2 Coaxials + Power contact) F Connectors 2. BShown with inserted retainer. 26. 0.8 2. -2/S-R -2/S-HU -0009-0 Light Gray Retainer (Only for -2/S-HU).

power supply terminal Brass 2..2 R..4 BRecommended Panel Cut-out 4-8. 26.9 For inner terminal 2 φ.2 For outside terminal 4 φ.2 2..4 GT8W 2.. GT0.9 26.9 Panel For power 2 supply terminal Ø. φ.4. -2/S-R Note : Use JIS B and 22 class 4, nominal diameter, length 6 screws (for a board thickness of.

12 GT Series Combinaton Type (2 Coaxials + Power contact) F Connectors 2. BShown with inserted retainer /S-R -2/S-HU Light Gray Retainer (Only for -2/S-HU) Dark Gray M Connectors BRecommended Board Mounting Pattern -2/P-DS(0) or Housing Light Gray Center terminal Brass Insulator Dark Gray Outer terminal Phosphor bronze Tin plating For power supply terminal Brass 2..2 R..4 BRecommended Panel Cut-out For inner terminal 2 φ.2 For outside terminal 4 φ GT8W 2.. GT Panel For power 2 supply terminal Ø. φ.4. -2/S-R Note : Use JIS B and 22 class 4, nominal diameter, length 6 screws (for a board thickness of.6 mm) for the mounting screws.. 0. distance between PCB and panel opening 26.9 GT GT GT GT6 GT2 *Used with separate retainer (P/S-R), which is sold separately. Board mounting type Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT6 Housing Board

Series M Connectors BShown with inserted retainer.. GT Housing GT6 *Used with separate retainer (P/S-R), which is sold separately. 2.8.2 2.6 0.6.4. 4.

2 Housing Light Gray -2/PP-HU(0) -0008-8 0 Ground terminal Phosphor bronze.8.6. 6.8 Ground terminal GT2 GT 2..4.

13 Series M Connectors BShown with inserted retainer.. GT Housing GT6 *Used with separate retainer (P/S-R), which is sold separately min Mounting bracket attachment side or GT6 Note : Refer to pages 2 for panel Mounting In-line Bracket Housing Light Gray -2/PP-HU(0) Ground terminal Phosphor bronze Ground terminal GT2 GT Light Gray GT N-2/PP-HU GT2 Note : Assemble main parts with separated retainer. (-2/PP-R) GT8W GT0 Retainer (Used with N-2/PP-HU and -2/PP-HU). Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. BRecommended Mounting Bracket Dimensions Dark Gray -2/PP-R

. -4S-HU -006-0 Light Gray M Connectors GT6 Note : Assemble main parts with separated retainer

14 .9.6 F Connectors -4P/S-R GT S-HU Light Gray M Connectors GT6 Note : Assemble main parts with separated retainer -4P/S-R GT2 GT GT.8.9 N-4PP-HU -00- Light Gray Note : The product should be used with a low-force insertion/withdrawal M connector terminal. Note 2 : Assemble main parts with separated retainer -4P/S-R. Retainer (Only for -4S-HU and N-4PP-HU) 2.8 GT8W 2.6 GT P/S-R Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. BShown with inserted retainer. Pos. for coaxial cable 4 coaxials type GT6 GT Series Dark Gray

15 Series M Connectors GT Board Mounting type GT BRecommended Board Mounting Pattern PIN No For outer terminal 8-φ GT2 4. Panel. GT For inner terminal 4-φ φ Lot No φ GT GT BRecommended Panel Cut-out 4.2 R distance between PCB and panel opening R 4P ＳＲ Board 2-4S HU GT8W 2- GT0 BMated condition (mounted) T.6 Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Housing Light Gray Center terminal Brass Insulator Dark Gray Outer terminal Phosphor bronze GT2 or -4P-DS(0) M Screw Panel Board 2

GT Series Pos. for coaxial cable with Waterproof type F Connectors Housing 6.4 8.

GT0 GT8W W-P/S-R Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

16 GT Series Pos. for coaxial cable with Waterproof type F Connectors Housing GT2 W-S-HU Light Gray Retainer (Used with W-PP-HU, JW-PP-HU, W-S-HU and W-P-HU) GT2 GT GT6 Note : Use correct retainer..4.9 GT 8. GT0 GT8W W-P/S-R Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT or Retainer Dark Gray Rubber Silicon rubber Compound Light Blue Note : Outer diameter of the cable must be within Ø2.9 to Ø.4 mm. *Waterproofness will depend on the cable. Please contact a Hirose Electric sales representative for further infomation when using this product

Series M Connectors 4 GT GT6 8.4 Housing 8.2 Housing Light Gray -0026-0 Connector seal Silicon rubber Compound White Note : Use correct retainer. 8.4 GT6 20.

17 Series M Connectors 4 GT GT6 8.4 Housing 8.2 Housing Light Gray Connector seal Silicon rubber Compound White Note : Use correct retainer. 8.4 GT GT 4 GT2 GT BRecommended Bracket Dimensions Diagram (Used with W-PP-HU) BMated condition (mounted) GT8W.8 GT Please check elsewhere for information about the bracket for JW-PP-HU Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT2 or W-P-HU or Housing Light Gray Connector seal Silicon rubber Compound White W-PP-HU JW-PP-HU 8 Note : Use correct retainer. 2

G Terminals.9 Ø0..D-2V or equivalent 9. 2. 9 2.9 0.4. 0.6.2 GT2 2. 2 BBoard Termination Pattern 0.6.2 2.9 (2.6) 2.9 6.9. (.) R 6. 2. 6.4 4.6 0.8 6.4 Lands.6 φ. 2-002-2 0 Brass,00 pcs/reel GT6 GTA-.

18 G Terminals.9 Ø0..D-2V or equivalent GT BBoard Termination Pattern (2.6) (.) R Lands.6 φ Brass,00 pcs/reel GT6 GTA-.6CF(0).9 BCompleted Termination cross section GT GT2..D-2Ｖor equivalent Heat-shrink tubing.. BBoard Termination Pattern. 6 GT Ø. La.2 nd Ø.2 Lands Ø0.6 Brass,00 pcs/reel BCompleted Termination cross section.9 R 2 (2.6) D-2V or equivalent GT8W Ø0. 2. BBoard Termination Pattern GT s GTB-.6CF(0) φ0 Ø2 Lands 6.4 Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. BRecommended Completed Termination cross section For Direct Coaxial Shielded Cable Termination GT6 GT Series Ø0.6.2 Ø GTC-.6CF Brass,00 pcs/reel.9

Series.9 BCompleted Termination cross section φ0. 6. R 2. Heat-shrink tubing -0029-8 0 Brass,00 pcs/reel 6.4 φ.2.9 BCompleted Termination cross section 9 0. 2 4.. 0.6.2 2.9 2. 0.. 2. 0.8 BRecommended Board Termination Pattern Brass,00 pcs/reel 6.

9 φ0 Lands BRecommended Completed Termination cross section 2. 4.8 BRecommended Board Termination Pattern 2.9 2. 6 0. 6. 0... 2 0.. 9.9 2. 8. 2 ands RG-/UM or equivalent. φ0. 2.9 2. 2.9 GT8W GTB-0.

19 Series.9 BCompleted Termination cross section φ0. 6. R 2. Heat-shrink tubing Brass,00 pcs/reel 6.4 φ.2.9 BCompleted Termination cross section BRecommended Board Termination Pattern Brass,00 pcs/reel 6.4 BRecommended Completed Termination cross section φ Pre-solder 8. R BRecommended Board Termination Pattern Brass,00 pcs/reel.9 φ0 Lands BRecommended Completed Termination cross section BRecommended Board Termination Pattern ands RG-/UM or equivalent. φ GT8W GTB-0.CF GT φ 0. 0.Ｄor equivalent GT GT GT Lands φ0..2 φ Ｄor equivalent. GT6 GTA-0.CF R 2. Pre-solder φ0. GT2 GTE-.CF Brass,00 pcs/reel. φ0 φ Lands φ. Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved..6 φ0 Lands 0.4 G-.6PCF(0) BRecommended Board Termination Pattern GT GT.D-2Ｖ or equivalent 6.9

20 Bottom Shield cover.4 GT Series 2.6. Assembled -P/S-CSB(0) Brass GT2 6.4 GT R. 6 GT6 GT2.6 GT.6 Assembled GT8W GT0 C-P-CSB(0) Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT6 26 Brass T=0.

Series 4. 9.8 Panel Mounting In-line Bracket GT6. 24.

-2PP-HU(0), -2PP-HU(C)(0) GT-BK(0) GT2 B Crimping tools GT User's manuals are available. Please ask your Hirose Electric account representative.

21 Series Panel Mounting In-line Bracket GT GT SPCC Used with connectors -PP-HU(0) -PP-HU(D)(0) -PP-HU(F)(0) -PP-HU(H)(0) -2PP-HU(0) -2PP-HU(0) GT6 -PP-HU(0), -PP-HU(0), -PP-HU(C)(0), -PP-HU(E)(0), -PP-HU(G)(0), -2/PP-HU(0), -2PP-HU(0), -2PP-HU(C)(0) GT-BK(0) GT2 B Crimping tools GT User's manuals are available. Please ask your Hirose Electric account representative. Automatic crimping machine Picture reference only GT2 Specifications Item Specification Press capacity.tons Stroke length 0mm Number of strokes 200spm(0Hz) kg Motor 0.2kW Crimping speed GT8W * Crimp height setting tables are available for each cable type. Please contact your nearest Hirose Electric account representative. Different cables will require different crimp height settings. AC00V 2000 to 4000pcs/hour GT0 CM-0C 200spm(60Hz) Weight Remarks GT Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved T=

22 Terminal /.6-2.9PCF(0) /.6-2.9SCF(0) /.6-2.9PCF(0) /.6-2.9SCF(0) GT2-2022/.6-2.9SCF(0) -2022/F2.-.PCF(0) -2022/F2.-.SCF(0) -2022/F.-.8PCF(0) -2022/F.-.8SCF(0) /F.-PCF(0) /F.-SCF(0) GT6-0/F4-PCF(0) -0/F4-SCF(0) /F4-PCF(0) GT -2428/F4-SCF(0) /F4-PCF(0) /F4-SCF(0) G-.6PCF(0) GTA-0.CF GTB-0.CF GTA-.6CF(0) GTB-.6CF(0) GTC-.6CF GTE-.CF GT8W GT0 GT GT2 GT6 Terminal Product No. -0/0.-.PCF(0) -0/0.-.SCF(0) L-2428/.6-2.PCF(0) -2428/.6-2.SCF(0) Oct..208 Copyright 208 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Powered by TCPDF ( Harness tools GT Series 28 Tool No. AP0--0/0.-.P AP0--0/0.-.S AP /.6-2.P AP /.6-2.S AP0--0/.6-2.9P-ID AP0--0/.6-2.9P AP0--0/.6-2.9S-ID AP0--0/.6-2.9S AP /.6-2.9P AP /.6-2.9PWS AP /.6-2.9P-B AP /.6-2.9S AP /.6-2.9SWS AP /.6-2.9S-B AP /.6-2.9S AP /F2.-.P AP /F2.-.S AP /F.-.8P AP /F.-.8S AP /F.-P-ID AP /F.-P AP /F.-S-ID AP /F.-S AP0--0/F4-P-ID AP0--0/F4-S-ID AP /F4-P-ID AP /F4-P-C2V AP /F4-S-ID AP /F4-S-C2V AP /F4-P AP /F4-P-8ID AP /F4-S AP /F4-S-8ID AP0-G-.6P AP0-GTA.B-0.P AP0-GTA.B-0.P AP0-GTA.B-.6P AP0-GTA.B-.6P AP0-GTA.B-.6P AP0-GTE-. Tool

GT16 Series. Subminiature Connectors for coaxial cables

GT16 Series. Subminiature Connectors for coaxial cables GT5 Sep.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT16 GT13 GT16 Series Subminiature Connectors for coaxial cables