0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors
|
|
- Byron Hubert Porter
- 5 years ago
- Views:
Transcription
1 .5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached to the actuator, so the actuator is supported along its entire length. Nov..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Highly reliable connection and robust structure Multi-polarized connectors, reinforced body structure and high FPC retention produced by the following features: Reliable connection created by its unique FPC/FFC positioning mechanism Prevents accidental disengagement with the design of its proprietary structure. Simplified operations The flip lock structure makes it easier to engage/disengage the actuator and reduces the required force needed to operate. A clear tactile click is delivered upon the successful completion of the mating process. (Fig.). Increased FPC/FFC retention force Vertical retention force for the FPC/FFC is.5 times stronger than our.5mm pitch connector the FH series. Horizontal retention force for the FPC/FFC is times stronger than our.5mm pitch connector the FH series *To realize the horizontal retention force values, the use of the FPC positioning tabs are required. FPC without the positioning tabs will comply with the specifications rated on the FH series. 4. Accepts standard.mm thick FPC/FFC It accepts.mm thick products that are easy to manufacture and have superb insertion performance. 5. Fully molded structure aids PCB layout The bottom of this connector is enclosed by a fully molded structure that protects the contacts and removes any restrictions from PCB patterning and design. 6. Supports automatic pick-n-place mounting Offered in tape and reel packaging that is compatible with automatic machine mounting. (,pcs/reel) 7. Halogen-free All materials and substances used to produce this product comply with Halogen-free standards.*defined according to IEC Br : 9ppm maximum, Cl : 9ppm maximum, Br+Cl :,5ppm maximum 8. Multiple packing options The standard packaging is,pcs/reel, but it is also offered in a 5pcs/reel. (The outer diameter of the reel will be Ømm in this case.) Fig. The FPC positioning mechanism and FPC tabs help to guide and hold the FPC prior to engaging the actuator Fig. Can also be used with straight sided, non-tabbed FPC/FFC Fig. 6.
2 FH8 Series.5mm and mm Pitch,.55mm Height FPC/FFC Connectors Product Specifications Ratings Rated Current.5A (Note ) Rated Voltage AC 5Vrms Operating Temperature Range -4 to +5ç (Note ) Operating Humidity Range Relative humidity 9% or less (no condensation shouldbe present) Storage Temperature Range - to +5ç (Note ) Storage Humidity Range Relative humidity 9% or less (no condensation should be present) Adaptive FPC/FFC contact specifications t=. ±.5 Gold plating Nov..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Item Specification Conditions. Insulation Resistance Minimum of 5Mø Measured with DC V. Withstanding Voltage No flashover or breakdown AC 5Vrms is applied for minute.. Contact Resistance Maximum of 5mø *including FPC/FFC conductor resistance Measured at ma (DC or,hz) 4. Durability 5. Vibration Resistance 6. Shock Resistance 7. Humidity Resistance of Steady State 8. Temperature Cycles 9. Solder Heat Resistance Materials / Finish Component Insulator Contact Metal fitting Contact Resistance : Maximum of 5mø No damaged, cracked or looseness of parts No electrical discontinuity of μs or greater Contact Resistance : Maximum of 5mø No damages, cracks and looseness of parts No electric discontinuity of μs or greater Contact Resistance : Maximum of 5mø No damaged, cracked or looseness of parts Contact Resistance : Maximum of 5mø Insulation Resistance : Minimum of 5Mø No damaged, cracked or looseness of parts Contact Resistance : Maximum of 5mø Insulation Resistance : Minimum of 5Mø No damaged, cracked or looseness of parts Should not have external deformity or loose parts mating cycles Frequency : to 55Hz Single amplitude of.75mm for cycles in axial directions Acceleration of 98m/s, 6ms duaration, sine half-wave waveform cycles in each of the axis 96 hours at temperature : 4ç and humidity : 9 to 95% Temperature : -4/+5 to +5/+5/+5 to +5ç Time : / to // to minutes 5 cycles Reflow : according to the Recommended Temperature Profile Hand solder: 5 ±5ç for 5 seconds Note : When energizing rated current to all contacts, use 7% of rated current. Note : Includes temperature rise caused by current flow. Note : The term "storage" here refers to products stored for a long period prior to board mounting and use. The operating temperature and humidity range covers the non-energized condition of connectors after board mounting and the temporary storage. Materials Color/Finish Remarks LCP Gray LCP Black UL94V- Phosphor bronze Brass Gold plating Pure tin plating Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. FH 8 D - 5 () S B -.5 SH (5) Series Name : FH Series No. : 8 None, D : Standard type E : Long reinforcing fitting type H : Space-saving type Standard type : The number of contacts Eccentric type : Number of contacts in.5mm housing Standard type : Blank Eccentric type : Actual number of pins Contact arrangement : Single (single row) Eccentric direction : Blank Standard type (without eccentricity) B Eccentric type (contacts on the opposite side of polarity mark) Contact Pitch :.5mm, mm Mounting direction, SH...SMT horizontal mounting type Specification : (5) Gold plating,, pcs/reel () Specification: Partial gold plating,, pcs/reel (7) Gold plating (for 4 contact only.),, pcs/reel (98) Gold plating, 5 pcs/reel
3 FH8 Series.5mm and mm Pitch,.55mm Height FPC/FFC Connectors Connector Dimensions [Standard type].5mm pitch product.5 (.) A (.9) Nov..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved..5MAX.MAX Notes Contact mark 4 5 Connector dimension table [Standard type] FH8-S-.5SH(**) FH8-5S-.5SH(**) FH8D-S-.5SH(**) FH8D-8S-.5SH(**) FH8D-S-.5SH(**) FH8-4S-.5SH(**) FH8-45S-.5SH(**) FH8D-5S-.5SH(**) FH8D-55S-.5SH(**) FH8-6S-.5SH(**) FH8D-64S-.5SH(**) FH8D-68S-.5SH(**) FH8D-74S-.5SH(**) B HRS No. No. of Contacts A B C D ** ** ** ** ** ** ** ** ** ** ** ** ** No. of contacts C (FPC/FFC insertion dimensions) D (5.4) (.) E MAX (.85) (.65) MAX The coplanarity of the metal fitting and contact is. MAX. The contact lead position shows the dimension from the E surface of the case bottom. This product is sold in embossed, tape and reel packaging. For details on this product please refer to the Packaging Specifications located on page 9. Recesses in part structure may be added to improve molding characteristics. Black marks may appear in the mold resin, but they will not negatively affect the performance of these connectors. The color of the plating may change after the reflow process, but it will not negatively affect the performance of these connectors Note : This product is sold in embossed, tape and reel packaging. This product is sold in full reel quantities of either, or 5 pcs/ reels. Please place orders by full reel quantities.
4 FH8 Series.5mm and mm Pitch,.55mm Height FPC/FFC Connectors Connector Dimensions [Standard type] mm pitch product (.7) (.) A (.) (.9) Nov..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved..5MAX Notes.MAX 4 5 Contact mark Connector dimension table [Standard type] FH8D-()SB-SH(**) FH8D-(5)SB-SH(**) FH8-4()SB-SH(**) FH8D-5()SB-SH(**) FH8-6()SB-SH(**) FH8D-64()SB-SH(**) FH8D-68(4)SB-SH(**) B HRS No. No. of Contacts A B C D ** ** ** ** ** ** ** No. of contacts C (FPC/FFC insertion dimensions) D (5.4) (.) E MAX (.85) (.65) MAX The lead flatness of metal fitting and contact is. MAX. The contact lead position shows the dimension from the E surface of the case bottom. This product is sold in embossed, tape and reel packaging. For details on this product please refer to the Packaging Specifications located on page 9. Recesses in part structure may be added to improve molding characteristics Black marks may appear in the mold resin, but they will not negatively affect the performance of these connectors. The color of the plating may change after the reflow process, but it will not negatively affect the performance of these connectors Note : This product is sold in embossed, tape and reel packaging. This product is sold in full reel quantities of either, or 5 pcs/ reels. Please place orders by full reel quantities. 4
5 FH8 Series.5mm and mm Pitch,.55mm Height FPC/FFC Connectors Connector Dimensions [Space-saving type].5 (.) A (.9) Nov..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Notes MAX.5MAX 4 5 Contact mark B C (FPC/FFC insertion dimensions) D No. of contacts Connector dimension table [Space-saving type].55. (.85) (.5) (5) MAX (.) E.5MAX The lead flatness of metal fitting and contact is. MAX. The contact lead position shows the dimension from the E surface of the case bottom. This product is sold in embossed, tape and reel packaging. For details on this product please refer to the Packaging Specifications located on page 9. Recesses in part structure may be added to improve molding characteristics Black marks may appear in the mold resin, but they will not negatively affect the performance of these connectors. The color of the plating may change after the reflow process, but it will not negatively affect the performance of these connectors. HRS No. No. of Contacts A B C D FH8H-8S-.5SH(**) ** Note : This product is sold in embossed, tape and reel packaging. This product is sold in full reel quantities of either, or 5 pcs/ reels. Please place orders by full reel quantities. 5
6 FH8 Series.5mm and mm Pitch,.55mm Height FPC/FFC Connectors BRecommended PCB layout and metal mask dimensions for.5mm pitch products Recommended metal mask thickness: t=.5.±..9±. H±. J±..8±. 4.±. H±. J±. ±.5 (metal mask) Nov..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved..±..5±.5.±. (land).±. (metal mask) A±.5 Standard type (FH8, FH8D).5MIN R.MAX R.MAX R.MAX R..±. (land).5±.5.±. (land).±. (metal mask) A±.5 BRecommended FPC/FFC dimensions for.5mm pitch products Notes.5±.5.±..±.5.5±. A±.5 F±.7 G±. The stiffener needs to be a minimum of.88 (7.5 mil) thick. The W dimension needs to be a minimum of.5mm..4±. Space-saving type (FH8H).8±. C.5MAX.5±. BRecommended PCB layout, metal mask and FPC dimensions for.5mm pitch products FH8-S-.5SH(**) FH8-5S-.5SH(**) FH8D-S-.5SH(**) FH8D-8S-.5SH(**) FH8D-S-.5SH(**) FH8-4S-.5SH(**) FH8-45S-.5SH(**) FH8D-5S-.5SH(**) FH8D-55S-.5SH(**) FH8-6S-.5SH(**) FH8D-64S-.5SH(**) FH8D-68S-.5SH(**) FH8D-74S-.5SH(**) FH8H-8S-.5SH(**) HRS No. No. of Contacts F G H J ** ** ** ** ** ** ** ** ** ** ** ** ** ** W 4.5MIN
7 FH8 Series.5mm and mm Pitch,.55mm Height FPC/FFC Connectors BRecommended PCB layout and metal mask dimensions for mm pitch products Recommended metal mask thickness: t=.5.±. H±. J±..9±. Nov..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved..5MIN.±. ±.5.75±. R.MAX R.MAX R.MAX R. A±.5.5±.5.±..5±. A±.5 F±.7 G±..4±..8±. C.5MAX.5±. W.±. (land).±. (metal mask).±. BRecommended FPC/FFC dimensions for mm pitch products Note : The stiffener needs to be a minimum of.88 (7.5 mil) thick. Note : The W dimension needs to be a minimum of.5mm. 4.5MIN.±.5 BRecommended PCB layout, metal mask and FPC dimensions for mm pitch products FH8D-()SB-SH(**) FH8D-(5)SB-SH(**) FH8-4()SB-SH(**) FH8D-5()SB-SH(**) FH8-6()SB-SH(**) FH8D-64()SB-SH(**) FH8D-68(4)SB-SH(**) HRS No. No. of Contacts F G H J ** ** ** ** ** ** **
8 FH8 Series.5mm and mm Pitch,.55mm Height FPC/FFC Connectors BFH8 Series FPC/FFC Material Configuration (Recommended Specifications). Single-Sided FPC FPC : Flexible Printed Circuit Layer Materials Thickness (μm) Cover lay film Polymide mil () Cover adhesive () Nov..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved.. Double-sided FPC Surface treatment Copper foil Base adhesive Base film Stiffener adhesive Reinforcing film Under nickel plating ~5μm+ gold plating.μm Cu oz Heat stiffener adhesive Polymide mil Heat stiffener adhesive Polymide 7mil Total FPC : Flexible Printed Circuit Layer Materials Thickness (μm) Cover lay film Polymide mil () Cover adhesive () Surface treatment Under nickel plating ~5μm+ gold plating.μm Through hole copper Cu 5 Copper foil Cu /oz 8 Base adhesive Heat stiffener adhesive 8 Base film Polymide mil Base adhesive Heat stiffener adhesive 8 Copper foil Cu /oz (8) Cover adhesive Heat stiffener adhesive Cover lay film Polymide mil Stiffener adhesive Heat stiffener adhesive 5 Reinforcing film Polymide 4mil * Remove the copper foil on the back of double-sided FPC to avoid Total 97 damage due to FPC bending.. FFC FFC : Flexible Flat Cable Annealed copper foil (Gold plated with under nickel plating) Adhesive Polyester Adhesive Reinforcing film Polyester type Polyester type Polyester type Total Layer Materials Thickness (μm) Polyester film Adhesive Polyester thermal plasticity Nominal thickness tolerance is approximately ±μm.. These specifications are an example of the material configuration of an FPC/FFC (t=. ±.5) used on the FH8 series.. Please contact the FPC/FFC manufacturer for the material configurations of their FPC/FFC. 8
9 FH8 Series.5mm and mm Pitch,.55mm Height FPC/FFC Connectors BPackaging Specifications [Common specifications for FH8 Series] Embossed Carrier Tape Dimensions (with a maximum tape width of 4mm) () (.) 4±. ±.5 ±. Ø.5 +. (Q) (N) M±. K±..75±. Nov..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Reel Dimensions (7.) (8.5) Standard type (FH8, FH8D) Embossed Carrier Tape Dimensions (with a minimum tape width of mm) () (.) 4±. Unreeling Direction ±.5 ±. (7.) (8.5) Ø.5 +. Standard type (FH8, FH8D).75±. (Q) (N) M±. () (.) 4±. Unreeling Direction ±.5 ±. (6.6) (8) Ø.5 +. (Ø) (S: Reel inner width) (Ø8) (Ø8) L±. K±. Space-saving type (FH8H).75±. (R) (Q) (N) M±. L±. K±. (T: Reel outer width) End section Loaded product section Leader section (minimum of 4 mm) Empty pockets (minimum of pockets) Embossed Carrier Tape containing product Empty pockets (minimum of pockets) Cover tape 9
10 FH8 Series.5mm and mm Pitch,.55mm Height FPC/FFC Connectors Nov..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. BPackaging specification dimensions [standard type] for.5mm pitch products FH8-S-.5SH(**) FH8-5S-.5SH(**) FH8D-S-.5SH(**) FH8D-8S-.5SH(**) FH8D-S-.5SH(**) FH8-4S-.5SH(**) FH8-45S-.5SH(**) FH8D-5S-.5SH(**) FH8D-55S-.5SH(**) FH8-6S-.5SH(**) FH8D-64S-.5SH(**) FH8D-68S-.5SH(**) FH8D-74S-.5SH(**) HRS No. No. of Contacts K L M N Q S ** ** ** ** ** ** ** ** ** ** ** ** ** BPackaging specification dimensions [Space-saving type] HRS No. No. of Contacts K L M N Q R S FH8H-8S-.5SH(**) ** BRecommended soldering profile T BPackaging specification dimensions [standard type] for mm pitch products FH8D-()SB-SH(**) FH8D-(5)SB-SH(**) FH8-4()SB-SH(**) FH8D-5()SB-SH(**) FH8-6()SB-SH(**) FH8D-64()SB-SH(**) FH8D-68(4)SB-SH(**) Temperature (ç) 5 5ç HRS No. No. of Contacts K L M N Q S ** ** ** ** ** ** ** ç 5 4 MAX ç ç T T 6.4 Applicable Conditions Reflow type : Far red/hot air reflow Reflow furnace atmosphere : Atmosphere Soldering : Cream type Sn/.Ag/.5Cu (M75-CM5--.5 made by Senju Metal Industry Co.) Testing PCB : Glass epoxy mm Land/metal mask dimensions Our recommendation conditions Start ç (6 sec.) (6 sec.) 9 to seconds Pre-heating time Time (sec) Soldering Time This solder profile is based on the conditions provided above. Please check the mounting conditions before use, conditions such as solder paste types, manufacturer, PCB size and any other soldering materials may alter the performance of such materials.
11 FH8 Series.5mm and mm Pitch,.55mm Height FPC/FFC Connectors BOperation Methods of Connector and Precautions Operation Methods. FPC/FFC insertion method Rotate the actuator upward to unlock it The actuator can be easily operated with the use of a thumb nail or index finger. Precautions for use The actuator on the FH8 series connector is designed to open to a maximum of 6 degrees, trying to open it farther than that will lead to damage. 6 Nov..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Insert the FPC/FFC with the contact surface facing down. FH8 is a bottom contact type connector. Insert FPC/FFC from the diagonally left side of the connector. Insert the FPC/FFC at a diagonal angle and lay it into position. Insert it until the FPC/FFC is securely hooked on the positioning area. Check to see if it is retained by pulling lightly on it. For detail, refer to the next page. Rotate the actuator downward. 4 Insert the FPC/FFC into the insertion slot as show below. Improper insertion can lead to damage and ultimately malfunction. Positioning part Do not pull on the FPC/FFC in an upward direction, doing this can damage the connector as it is not equipped to handle a large amount of force in this direction. When dealing with a higher contact count (8 positions), be sure to use two fingers to close the actuator on both sides. Using one finger might not close it completely and leave an incomplete connection.. Removing the FPC/FFC Rotate the actuator upward, then angle the FPC/FFC upward after the actuator has been released and remove the FPC/FFC straight out. 5 When inserting FPC/FFC, do not rub it hard on the lower surface of the insertion slot of the connector. Otherwise, the contact hits hard on the FPC/FFC, and may cause the deformation of the contact or conductor separation etc. of the FPC/FFC. During the insertion of the FPC/FFC, make sure that
12 Powered by TCPDF ( FH8 Series.5mm and mm Pitch,.55mm Height FPC/FFC Connectors BCautions when mating FFFC/FPC with positioning tabs Nov..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Operation Methods. Position for insertion Insert the cable into the gap ( ) between the side walls ( ) on both sides of the cable insertion port' and the 'guide walls ( ) on both sides of the inner part of the connector' putting the tab of the cable on the gap.. Cautions during insertion/mating Do not insert the FPC/FFC at an skewed angle (as shown), this type of action may cause the corner of the cable to get hooked and deform its contacts. Skwed insertion Insert the cable straight into the connector opening and hook the cable tab onto the guide. Pull the cable towards yourself with a slight force after insertion, and close the actuator after confirming that the cable tab is completely secured. If it cannot be pulled to out, the cable can be determined to be inserted into the correct position. Recommended mating method Insert the cable straight from the diagonally left side. PC/FFC must not over lap Precautions for use Do not close the actuator until the FPC/FFC has been placed into its correct position. If it is sitting on the guides and the actuator closes onto it, it can cause damage and alter its performance. Incorrectly placed onto the left guide Incorrectly placed onto the right guide Normal insertion Do not close the actuator with the cable sitting on either guide. In case you accidentally close the lock with the cable sitting on the guides, do not move the cable around to make it seat. Open the actuator immediately and reposition the cable as explained in. Position for insertion noted above. Pull the cable lightly to yourself and check if the tab is secured. Close the actuator. Pulling direction The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of /6. Contents are subject to change without notice for the purpose of improvements.
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The
More information0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
More information0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features
More information0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged
More information0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
More information0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector FH63 Series Single action lock (Dimension diagram : 30pos.) 2.8mm 21.94mm Features 1. Automatic single
More information0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
.4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization
More information0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
More information0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
More information0.5mm and 1mm Pitch FPC/FFC Connectors
0.5mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear
More informationSmall-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
More information0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors
0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors FH52 Series Secure actuator retention Metal fittings are designed to hold and stabilize the actuator Contacts are designed to hold and stabilize the actuator
More information0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors
0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors FH19C Series/FH19SC Series FH19C FPC/FFC thickness: 0.2±0.0mm Actuator color: Brown Features 1. Low-profile 0.5mm pitch FPC/FFC Connectors Miniaturization
More information0.4 mm Contact Pitch, Board-to-FPC Connectors
0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure Two-point contact system Features 1. Two stacking height options Two separate heights
More information0.5 mm and 1 mm Pitch FPC/FFC Connectors
0.5 mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. Ease of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock)
More information1.25mm Pitch Super Low profile Crimping Connector
1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height
More information1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
More information0.5 mm and 1 mm Pitch FPC/FFC Connectors
0.5 mm and mm Pitch FP/FF onnectors FH Series pr..0 opyright 0 HIROS LTRI O., LT. ll Rights Reserved. Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate
More information1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
rawing for the most current and accurate design information. 0.5mm and mm Pitch onnectors For FP/FF FH Series Flip-lock Features. ase of Use and Space Savings Only one finger or.9n (Newtons) of force is
More information0.5mm Pitch SMT Board-to-Board Connector
0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information0.5mm Pitch SMT Board to Board Connector
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationSubminiature Coaxial Switch 1.6 mm High, DC to 6 GHz
NEW Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156NB Series Overview Developed for inspection of high frequency circuits used in portable terminals.verification of the circuit performance is
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
More information0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH34SRJ Series 3.8mm Depth Features 1. Low-profile With the
More informationHigh Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
More information2.54mm Pitch Card Edge Connector
2.54mm Pitch Card Edge Connector CR22 Series Product Standards Rating Current rating: 3A Voltage rating: 0VAC Operating Temperature Range: - to +85ç (Note 1) Operating Humidity Range: 40 to % Storage Temperature
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More information2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
More informationUltra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
More informationI/O Card Interface Connectors
I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More informationDC to 6GHz Ultra-Small Coaxial Switch
DC to 6Hz Ultra-Small Coaxial Switch MS-147 Series Outline The ultra-small MS-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (substrates)
More informationCompact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth
More informationCF Card Connectors. Complies with Compact Flash Association. MI20/21 Series. Features. Applications
CF Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth for miniaturization
More information3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
More information0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors
0.4 mm Pitch, 0.6 and mm Height, Board-to-Board and Board-to-FPC Connectors BM20 Series BM20 2.3mm Existing products 2.98mm Receptacle A 22.3% reduction in size! 2.98 0.4 =About 3.0mm2 Header BM20 2.3
More information3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
More informationCompact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI20/21 Series (a)space-saving design 7.0 51.75 Features 1. Compact design occupies minimum space Connectors are designed with small
More information0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors
0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors BM20 Series Receptacle Existing products BM20 2.3mm 2.98mm 10.4mm 10.48mm Existing products A 22.3% reduction in size! BM20
More information-Original Multi-purpose High-pin-count Miniature Waterproof Connectors
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors RM-W Series ssembly type (straight plug/rm5w) 5 Ø.5 Ø.5 Mar..0 Copyright 0 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø Overview
More information125A High-Current Waterproof Connectors
125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure
More informationHigh speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together
More information0.4/0.5mm Pitch 1.5mm Height High Speed Transmission (5 + Gbps) FPC Connectors
0.4/0.5mm Pitch 1.5mm Height High Speed Transmission (5 + Gbps) FPC Connectors FH55/FH55M Series Dimensions : 40 pos 4mm (depth) 23.4mm(FH55)/19.3mm(FH55M) Features 1. High-Speed Transmission(5 + Gbps)
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More information2mm Pitch Miniature Connector for HDD
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationPower Supply Connectors For Industrial Equipment
Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (0/
More information0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors
0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors DF36 Series High contact reliability Effective mating length of 0.4 mm 1.5±0. (Mated height) (0.4) (Effective mating length) Enhanced
More informationHalf-pitch and Multi-function Two Piece Connector
Half-pitch and Multi-function Two Piece Connector FX2 Series Sttacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various
More informationPRODUCT SPECIFICATION
1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE
More informationHigh speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together
More informationHigh Current, Plastic Power Supply Connectors
High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationHigh Current Connector
High Current Connector Series 1U Nov.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Features 1. Power contact supports up to 10 mps (210/1pin Derating curve, ambient temp 2 C) with
More information2mm pitch, high reliability with lock, board to cable and cable to cable connector
NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet
More informationMiniature Waterproof Plastic Connectors
NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter
More informationProduct Specification Rev A
Product Specification 108-6116 1. Scope :.5 Signal DBL Lock Connector 18P 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
More informationCircular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
More informationCOMPACT FLAT SIZE FOR AUTOMOTIVE
PACT FLAT SIZE FOR AUTOMOTIVE RELAYS RoHS compliant FEATURES Compact flat type Flat size enables it to be built-in switch units. PC board terminal type: 9.5 mm.374 inch Surface-mount terminal
More informationBH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
More information0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
.4mm Pitch, 1.5 to 4.mm Height, Board-to-Board and Board-to-FPC Connectors DF4 Series Space saving Space saving Jun.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. High density
More informationCOMPACT FLAT SIZE FOR AUTOMOTIVE
PACT FLAT SIZE FOR AUTOMOTIVE RELAYS RoHS compliant FEATURES Compact flat type Flat size enables it to be built-in switch units. PC board terminal type: 9.5 mm.374 inch Surface-mount terminal
More informationWK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change
More informationENTERY INDUSTRIAL CO., LTD. E&T ELECTRONICS (DONG GUAN) CO., LTD. E&T ELECTRONICS (SU ZHOU) CO., LTD.
TO SPECIFICATION FOR APPROVAL DESCRIPTION: Pitch 1.00mm Non-ZIF FPC Connector, R/A, SMT Type Dual CUSTOMER PROD.NO/DWG.NO: E&T PROD.NO: 7182K-XXXN-00X APPROVAL SHEET NO: E&T DWG. NO./DOCUMENT: 7182K-XXXN-00X
More informationSPECIFICATION FOR APPROVAL
TO SPECIFICATION FOR APPROVAL DESCRIPTION: Pitch 0.50mm ZIF FPC Connector, R/A, SMT Type Bottom Contact CUSTOMER PROD.NO/DWG.NO: E&T PROD.NO: 6702K-XXXX-00,20,26X APPROVAL SHEET NO: E&T DWG. NO./DOCUMENT:
More informationFLAT/VERTICAL TYPE HIGH POWER BIFURCATED CONTACT
FLAT/VERTICAL TYPE HIGH POWER BIFURCATED CONTACT NC NC RELAYS Flat type Flat type (PC board) (PC board) FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic design achieves 10.9
More informationLow Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board mounting
More informationUltra Low-profile Interface Connectors with 2.0 mm Mounting Height
Ultra Low-profile Interface Connectors with.0 mm Mounting Height LX Series Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Low profile on the PCB When mounted on the
More informationProduct Compliant to DIN41612/IEC603-2 Standard
Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type
More informationWK25S WK20S WK10S WK12S WK08S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805
WK25S WK20S WK10S WK12S WK08S ±5%, ±10%, ±20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WKxxS_V02
More informationWK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice.
More informationG6K. Surface Mounting Relay with the World s Smallest Mounting Area. Application Examples. Model Number Legend. Ordering Information
with the World s Smallest Mounting Area Subminiature model as small as.2 (H). (W) (L) mm is ideal for high-density mounting ((U)-2F(-Y)). Low profile of.2 mm improves mounting efficiency ((U)-2F(-Y)).
More informationGT11 Series. Connectors for shielded cables. Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT 22 GT 25 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 PO5G GT 16 GT 10 GT 18W GT 9 GT 8 GT 15 GT 13 GT 5 GT11 Series Connectors for shielded cables Features A housing lance systems has been used to
More informationPower Supply Connectors For Industrial Equipment
ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationS J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
More informationSA Series Breaker (Surface Mount Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer
More informationTL RELAYS. TYPICAL APPLICATIONS Head lamp, Fog lamp, Fan motor, etc. ORDERING INFORMATION TYPES. High Load Relay for Smart Junction Box ACTL.
High Load Relay for Smart Junction Box TL RELAYS High heat-resistant type: Sealed Pin in Paste compliant type: Flux tight New 14.4.7 11.433 1.3 FEATURES Large capacity switching
More informationWaterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16
More informationReference Only. Spec.No. JENF243H-0008M-01 P 1/ 14. Rated Current. Withstanding Voltage 20A 125V (DC) (DC) 250V (DC) 20A (DC) 20A 40V (DC) (DC) (DC)
Spec.No. JENF243H-0008M-01 P 1/ 14 SMD Block Type EMIFIL BNX02-01 Reference Specification 1.Scope This reference specification applies to SMD Block Type EMIFIL. 2.Part Numbering BN X 022-01 L Product ID
More informationPCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type)
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type) Double-sided two point Contact System Features 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard.
More informationKSC Series Sealed Tact Switch for SMT
KSC Series Features/Benefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
More informationCF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
More informationR Z18 Series : SMB CARLOCK
.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY
More informationSA Series Breaker (Surface Mount Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer
More information0.5 mm Pitch, Board to Board Connector with Floating Structure
0.5 mm Pitch, Board to Board Connector with Floating Structure FX20 Series X direction Floating range :0.6 0.8mm Y direction Floating range :0.6mm Features 1. 0.5 mm pitch 2. Connection type: Right angle
More informationProduct Specification AMP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version
Product Specification 108-60026 MP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version 1. 1.1 Scope: Contents: This specification covers the requirements for product performance, test methods and
More informationSubminiature Coaxial Switch 1.6 mm High, DC to 6 GHz
Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156HF Series Halogen Free Features 1. Low insertion loss 0.1 db typical at 6 Hz (not mated with the plug). 2. Space-saving design 2.7 mm x 2.7 mm
More informationUltra-small, power/signal contact design for Board-to-Board/FPC-to-Board providing 3A max current
NEW Ultra-small, power/signal contact design for Board-to-Board/FPC-to-Board providing 3A max current BM29 Series 20% reduction in size compared with alternate Hirose s products 3.16mm BM29 6 contacts
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More informationPressure sensor with built-in amplification and temperature compensation circuit
sensor with built-in amplification and temperature compensation circuit PS-A PRESSURE SENSOR (built-in amplification and temperature compensating circuit) NEW FEATURES 1. Contains built-in amplification
More informationSFI Electronics Technology
1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V
More information