0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors

Size: px
Start display at page:

Download "0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors"

Transcription

1 .4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization of personal mobile devices created a need for a low profile, high density interconnection system.in the same time, the demand for higher currents and higher reliability Flexible Printed Circuits has also increased. Hirose meets all these challenges with introduction of this connector. Features 4.mm FPC temporary retention.mm 4.mm. Low profile, small PCB mounting area, weight reduction Protruding only. mm above the board the connector occupies 5% less area than comparable type having contacts spaced on.5 mm centers. Creative design, coupled with high manufacturing capabilities resulted in extremely low weight of the connector.. Higher current carrying capacity Contact spacing of.4 mm allows production of wider and simpler pattern of conductive traces on FPC.. FPC temporary hold and verification of correct insertion The connector has built-in FPC hold protrusions allowing the tactile feel of the correct FPC insertion and holding it in position before closing of the actuator. 4. Uses standard. mm thick FPC 5. One-finger operation of the actuator Proven (in several other Hirose's connectors!) Flip-Lock rotating actuator assures reliable mechanical and electrical connection with FPC, confirming it with a definite tactile feel. 6. Board placement with automatic equipment Flat top surface and packaging on the tape-and reel allows the use of vacuum nozzles. Standard reel contains,5 connectors. 7. Environmental considerations The center cores of the embossed tape reels are made of Styrofoam. 8. Variety of contact positions Available with, 4, 5,54, 57 and 6 pos. Applications Mobile phones, PDA s, digital cameras, digital video cameras, LCD connections, plasma displays (PDP), camera modules and other compact devices requiring Flexible Printed Circuit connections using high reliability ultra-small profile connectors Wider FPC conductive traces.4mm FPC notch.7mm.4 mm pitch FPC. mm pitch FPC Metal fittings on each side do not protrude out allowing side-byside mounting of the connectors or closer component placement. Temporary hold-fpc fully inserted.mm.mm FPC temporary hold protrusion Metal fitting 67

2 Product Specifications Rating Rated current.4 A DC(Note ) Rated voltage 4 V AC Recommended FPC Thickness: =.±.mm tin-lead plated (Note ) Operating temperature range -55ç to +85ç (Note ) Operating humidity range Relative humidity 9% max. (No condensation) Storage temperature range -ç to +5ç (Note ) Storage humidity range Relative humidity 9% max. Item Specification Conditions. Insulation resistance. Withstanding voltage. Contact resistance 4. Durability (insertion/ withdrawal) 5. Vibration 6. Shock 7. Humidity (Steady state) 8. Temperature cycle 9. Resistance to soldering heat 5 M ø min. No flashover or insulation breakdown. m ø max. * Including FPC conductor resistance No electrical discontinuity of μs or more. No electrical discontinuity of μs. min. Insulation resistance: 5 M ø min. Insulation resistance: 5 M ø min. No deformation of components affecting performance. V DC V AC /one minute ma cycles Frequency: to 55 Hz, single amplitude of.75 mm, cycles in each of the directions. Acceleration of 98 m/s, 6ms duration, sine half-wave waveform, cycles / each of axis 96 hours at 4ç and humidity of 9% to 95%.RH Temperature: -55ç / +5ç to +5ç / +85ç / +5ç to +5ç Time: / to / / to (Minutes) 5 cycles Reflow: At the recommended temperature profile Manual soldering: 5ç±ç for 5 seconds Note : When passing the current through all of the contacts, use 7% of the current rating. Note : Includes temperature rise caused by current flow. Note : The term storage refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Materials Part Insulator Actuator Contacts Metal fittings Material Finish Remarks LCP LCP Phosphor bronze Phosphor bronze Color: Black Color: Brown Gold plated (Note ) Tin plated UL94V Ordering information FH7-54S -.4 SH (5) 4 5 Series name: FH7 No. of contacts Number of contacts:, 4, 5, 54, 57, 6 Contact pitch:.4 mm 4 5 Terminal type SH: SMT horizontal mounting type Plating code (5): Gold plated(4,5,6contacts)(rohs compliant) (5): Gold plated(,54,57contacts)(rohs compliant) 68

3 BOperation and Precautions Operation.FPC insertion procedure. Connector installed on the board. Lift up the actuator. Use thumb or index finger. Precautions Do not apply excessive force or use any type of tool to operate the actuator. Fully insert the FPC in the connector parallel to mounting surface, with the exposed conductive traces facing down. The connector will assure reliable performance when the actuator is open to maximum. Do not exceed this angle, as this may cause permanent damage to the connector. Over FPC conductor surface (Bottom side) Rotate down the actuator until firmly closed. It is critical that the inserted FPC is not moved and remains fully inserted. Exercise caution when applying upward force to the connected FPC..FPC removal Lift up the actuator. Carefully withdraw the FPC. 4 The connectors are straight within. mm max. Make sure that the PC board connector mounting area flatness can accept the connector terminals without causing any failure of the solder joints. F Connector PC board (.5) MAX 8 MAX (.5) F 8 69

4 Connector Dimension.4 A B.5 H (.5) H.5.5 (.9) A** Polarizing mark indicator Number of contacts indicator (C: FPC insertion slot dimension) D (.5) (.). K.5MAX (.7).5MAX Notes 4 Lead co-planarity including reinforced metal fittings shall be. MAX. The contact terminal lead position indicates the dimension from the K surface, the bottom surface of the insulator body. Packaging for this product is embossed carrier tape packaging. Refer to packaging specification. Note that preventive hole for sink mark could be added for improvement. The quality remains good, even with the dark spots, which could occasionally occur on molded plastic. Part Number FH7-S-.4SH(5) FH7-4S-.4SH(5) FH7-5S-.4SH(5) FH7-54S-.4SH(5) FH7-57S-.4SH(5) FH7-6S-.4SH(5) Note : Refer to "Ordering information". Note : Tape and reel packaging (,5 pieces/reel). Order by number of reels. Unit: mm CL No. Number of Contacts A B C D RoHS CL CL CL YES CL Note CL CL

5 BRecommended PCB mounting pattern and metal mask dimensions.4±.5.±.5.8±.5.55±.5 E R Number of contacts.±.(land).4 R.4.±.(Metal mask) Recommended metal mask thickness:.t=. Outline of the connector (.75) F±.5 (.) (.) (.) (.) (.) (.5) (.5).55±.5 BRecommended FPC Dimensions.8±.7 G±.5 E±..8±.7 -R..4±..7±..±..±.5.±.5.±. R.MAX -R.MAX R..9±...7MIN (Uncover area).min(stiffener) (.7) H±.5 G±.5 (.7) Covering film layer.5min (Overlap) Polyimide and thermally hardening adhesive is recommended as the materials for the stiffener. Overlap between covering film layer and stiffener is.5mm min. Unit: mm Part Number FH7-S-.4SH(5) FH7-4S-.4SH(5) FH7-5S-.4SH(5) FH7-54S-.4SH(5) FH7-57S-.4SH(5) FH7-6S-.4SH(5) CL No. Number of Contacts E F G H CL CL CL CL CL CL

6 BPackaging Specification Embossed Carrier Tape Dimensions () (.) ±.5 4±. ±. (P).75±. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Tape width up to 4mm. Tape width mm and over. Ø.5 +. N±. L±. () (.) 4±. ±.5 ±. Ø.5 +. (P).75±. N±. M±. L±. (4.) Unreeling direction (5.) Unreeling direction.5 +. (4.) (5.) Reel Dimensions (Ø) (Q:INSIDE) (Ø8) (Ø8) (R:OUTSIDE) End portion Mounting portion Lead portion (4mm min.) No connector inserted ( pockets min.) Embossed carrier tape No connector inserted ( pockets min.) Top cover tape Unit: mm Part Number CL No. Number of Contacts L M N P Q R FH7-S-.4SH(5) CL FH7-4S-.4SH(5) CL FH7-5S-.4SH(5) CL FH7-54S-.4SH(5) CL FH7-57S-.4SH(5) CL FH7-6S-.4SH(5) CL ,5 pieces per reel. 7

7 BRecommended Temperature Profile Using Lead-free Solder Paste MAX ç ç HRS test condition Solder method :Reflow, IR/hot air Temperature(ç) 5 5ç ç (Nihon Den-netsu Co., Ltd. s Part Number: SENSBY NR-) Environment :Room air Solder composition :Paste, 96.5%Sn/.%Ag/.5%Cu (Senju Metal Industry, Co., Ltd. s Part Number: M75-CM5-4-.5) Test board :Glass epoxy 45mm mm.6mm thick Land dimensions:.mm.8mm 5 Metal mask :..8.mm thick ç (6sec.) 9 sec. to sec. (6 sec.) Start Preheating Soldering Time (Seconds) The temperature profiles shown are based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. Consult your solder paste and equipment manufacturer for specific recommendations. 7

8 BFPC Construction (Recommended Specifications). Using Single-sided FPC Top side Material Name Covering layer film Material Polyimide mil thick. Thickness (μm) Cover adhesive Surface treatment to 5 micron nickel underplated. micron gold palated Bottom side Copper foil Base adhesive Base film Reinforcement material adhesive Stiffener Cu oz Polyimide mil thick Thermosetting adhesive Polyimide mil thick 5 75 Total 9. Using Double-sided FPC Top side Material Name Covering layer film Material Polyimide mil thick Thickness (μm) Cover adhesive Surface treatment to 5 micron nickel underplated. micron gold palated Bottom side Through-hole copper Copper foil Base adhesive Base film Base adhesive Copper foil Cover adhesive Covering layer film Reinforcement material adhesive Stiffener Cu Cu /oz Polyimide mil thick Cu /oz Polyimide mil thick Thermosetting adhesive Polyimide mil thick Total 97 To prevent release of the lock due to FPC bending, use of the FPC with copper foil on bottom side is not recommended. 74

0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors

0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged

More information

0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors

0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors 0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features

More information

0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC

0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables

More information

0.3 mm Pitch, 1.0 mm Height FPC Connector

0.3 mm Pitch, 1.0 mm Height FPC Connector 0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector

More information

0.5mm and 1mm Pitch Connectors For FPC/FFC

0.5mm and 1mm Pitch Connectors For FPC/FFC 0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. Ease of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock)

More information

0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector

0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector 0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector FH63 Series Single action lock (Dimension diagram : 30pos.) 2.8mm 21.94mm Features 1. Automatic single

More information

0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors

0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors .5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached

More information

0.5mm and 1mm Pitch FPC/FFC Connectors

0.5mm and 1mm Pitch FPC/FFC Connectors 0.5mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear

More information

0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors

0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors 0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors FH19C Series/FH19SC Series FH19C FPC/FFC thickness: 0.2±0.0mm Actuator color: Brown Features 1. Low-profile 0.5mm pitch FPC/FFC Connectors Miniaturization

More information

0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions

0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions 0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The

More information

0.5mm and 1mm Pitch Connectors For FPC/FFC

0.5mm and 1mm Pitch Connectors For FPC/FFC ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

0.5 mm and 1 mm Pitch FPC/FFC Connectors

0.5 mm and 1 mm Pitch FPC/FFC Connectors 0.5 mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear

More information

0.6mm Pitch Stacking Height 3mm to 16mm Connectors

0.6mm Pitch Stacking Height 3mm to 16mm Connectors .6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking

More information

0.5 mm and 1 mm Pitch FPC/FFC Connectors

0.5 mm and 1 mm Pitch FPC/FFC Connectors 0.5 mm and mm Pitch FP/FF onnectors FH Series pr..0 opyright 0 HIROS LTRI O., LT. ll Rights Reserved. Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate

More information

0.6mm Pitch Stacking Height 3mm to 16mm Connectors

0.6mm Pitch Stacking Height 3mm to 16mm Connectors .6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking

More information

1mm Pitch Cable-to-Board Connectors supporting LVDS signal

1mm Pitch Cable-to-Board Connectors supporting LVDS signal NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:

More information

0.5mm and 1mm Pitch Connectors For FPC/FFC

0.5mm and 1mm Pitch Connectors For FPC/FFC rawing for the most current and accurate design information. 0.5mm and mm Pitch onnectors For FP/FF FH Series Flip-lock Features. ase of Use and Space Savings Only one finger or.9n (Newtons) of force is

More information

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz NEW Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156NB Series Overview Developed for inspection of high frequency circuits used in portable terminals.verification of the circuit performance is

More information

1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors

1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB

More information

0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors

0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors 0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors FH52 Series Secure actuator retention Metal fittings are designed to hold and stabilize the actuator Contacts are designed to hold and stabilize the actuator

More information

0.4 mm Contact Pitch, Board-to-FPC Connectors

0.4 mm Contact Pitch, Board-to-FPC Connectors 0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure Two-point contact system Features 1. Two stacking height options Two separate heights

More information

0.5mm Pitch SMT Board to Board Connector

0.5mm Pitch SMT Board to Board Connector All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

0.5mm Pitch SMT Board-to-Board Connector

0.5mm Pitch SMT Board-to-Board Connector 0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of

More information

1.25mm Pitch Super Low profile Crimping Connector

1.25mm Pitch Super Low profile Crimping Connector 1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height

More information

Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply

Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector

More information

DC to 6GHz Ultra-Small Coaxial Switch

DC to 6GHz Ultra-Small Coaxial Switch DC to 6Hz Ultra-Small Coaxial Switch MS-147 Series Outline The ultra-small MS-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (substrates)

More information

0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors 0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH34SRJ Series 3.8mm Depth Features 1. Low-profile With the

More information

Compact Flash Card Connectors

Compact Flash Card Connectors Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth

More information

I/O Card Interface Connectors

I/O Card Interface Connectors I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal

More information

Low Profile Swing-Lock Board to Wire Connector for Power

Low Profile Swing-Lock Board to Wire Connector for Power Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure

More information

CF Card Connectors. Complies with Compact Flash Association. MI20/21 Series. Features. Applications

CF Card Connectors. Complies with Compact Flash Association. MI20/21 Series. Features. Applications CF Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth for miniaturization

More information

Low Profile Swing-Lock Board to Wire Connector for Power

Low Profile Swing-Lock Board to Wire Connector for Power Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing

More information

Compact Flash Card Connectors

Compact Flash Card Connectors Compact Flash Card Connectors Complies with Compact Flash Association MI20/21 Series (a)space-saving design 7.0 51.75 Features 1. Compact design occupies minimum space Connectors are designed with small

More information

2.5mm Pitch Connector for Full Lock and Discrete Wire Connection

2.5mm Pitch Connector for Full Lock and Discrete Wire Connection 2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.

More information

2mm Pitch Miniature Connector for HDD

2mm Pitch Miniature Connector for HDD ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

2.54mm Pitch Card Edge Connector

2.54mm Pitch Card Edge Connector 2.54mm Pitch Card Edge Connector CR22 Series Product Standards Rating Current rating: 3A Voltage rating: 0VAC Operating Temperature Range: - to +85ç (Note 1) Operating Humidity Range: 40 to % Storage Temperature

More information

3.3 mm Contact Pitch, Connectors for Internal Power Supplies

3.3 mm Contact Pitch, Connectors for Internal Power Supplies . mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5

More information

2mm Double-Row Connector (Product Compliant to UL/CSA Standard)

2mm Double-Row Connector (Product Compliant to UL/CSA Standard) Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple

More information

2.5mm Pitch Connector for Full Lock and Discrete Wire Connection

2.5mm Pitch Connector for Full Lock and Discrete Wire Connection 2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE

More information

Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)

Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on

More information

0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors

0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors 0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors BM20 Series Receptacle Existing products BM20 2.3mm 2.98mm 10.4mm 10.48mm Existing products A 22.3% reduction in size! BM20

More information

0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors

0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors 0.4 mm Pitch, 0.6 and mm Height, Board-to-Board and Board-to-FPC Connectors BM20 Series BM20 2.3mm Existing products 2.98mm Receptacle A 22.3% reduction in size! 2.98 0.4 =About 3.0mm2 Header BM20 2.3

More information

3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)

3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) .9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector

More information

High Performance, Microminiature Circular Connectors

High Performance, Microminiature Circular Connectors High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type

More information

Low Profile Connectors for AC power supply

Low Profile Connectors for AC power supply Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation

More information

High Performance, Microminiature Circular Connectors

High Performance, Microminiature Circular Connectors High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,

More information

High speed transmission, 1mm pitch Small Interface Connector

High speed transmission, 1mm pitch Small Interface Connector NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together

More information

SPECIFICATION FOR APPROVAL

SPECIFICATION FOR APPROVAL TO SPECIFICATION FOR APPROVAL DESCRIPTION: Pitch 0.50mm ZIF FPC Connector, R/A, SMT Type Bottom Contact CUSTOMER PROD.NO/DWG.NO: E&T PROD.NO: 6702K-XXXX-00,20,26X APPROVAL SHEET NO: E&T DWG. NO./DOCUMENT:

More information

Half-pitch and Multi-function Two Piece Connector

Half-pitch and Multi-function Two Piece Connector Half-pitch and Multi-function Two Piece Connector FX2 Series Sttacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various

More information

S J

S J 1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V

More information

Power Supply Connectors For Industrial Equipment

Power Supply Connectors For Industrial Equipment Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (0/

More information

0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors

0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors 0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors DF36 Series High contact reliability Effective mating length of 0.4 mm 1.5±0. (Mated height) (0.4) (Effective mating length) Enhanced

More information

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) 7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent

More information

ENTERY INDUSTRIAL CO., LTD. E&T ELECTRONICS (DONG GUAN) CO., LTD. E&T ELECTRONICS (SU ZHOU) CO., LTD.

ENTERY INDUSTRIAL CO., LTD. E&T ELECTRONICS (DONG GUAN) CO., LTD. E&T ELECTRONICS (SU ZHOU) CO., LTD. TO SPECIFICATION FOR APPROVAL DESCRIPTION: Pitch 1.00mm Non-ZIF FPC Connector, R/A, SMT Type Dual CUSTOMER PROD.NO/DWG.NO: E&T PROD.NO: 7182K-XXXN-00X APPROVAL SHEET NO: E&T DWG. NO./DOCUMENT: 7182K-XXXN-00X

More information

High Performance Miniature Circular Connectors

High Performance Miniature Circular Connectors High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..

More information

SFI Electronics Technology

SFI Electronics Technology 1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V

More information

High speed transmission, 1mm pitch Small Interface Connector

High speed transmission, 1mm pitch Small Interface Connector NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together

More information

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) 7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent

More information

2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)

2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed) 2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive

More information

2mm pitch, high reliability with lock, board to cable and cable to cable connector

2mm pitch, high reliability with lock, board to cable and cable to cable connector NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet

More information

TL RELAYS. TYPICAL APPLICATIONS Head lamp, Fog lamp, Fan motor, etc. ORDERING INFORMATION TYPES. High Load Relay for Smart Junction Box ACTL.

TL RELAYS. TYPICAL APPLICATIONS Head lamp, Fog lamp, Fan motor, etc. ORDERING INFORMATION TYPES. High Load Relay for Smart Junction Box ACTL. High Load Relay for Smart Junction Box TL RELAYS High heat-resistant type: Sealed Pin in Paste compliant type: Flux tight New 14.4.7 11.433 1.3 FEATURES Large capacity switching

More information

COMPACT FLAT SIZE FOR AUTOMOTIVE

COMPACT FLAT SIZE FOR AUTOMOTIVE PACT FLAT SIZE FOR AUTOMOTIVE RELAYS RoHS compliant FEATURES Compact flat type Flat size enables it to be built-in switch units. PC board terminal type: 9.5 mm.374 inch Surface-mount terminal

More information

-Original Multi-purpose High-pin-count Miniature Waterproof Connectors

-Original Multi-purpose High-pin-count Miniature Waterproof Connectors -Original Multi-purpose High-pin-count Miniature Waterproof Connectors RM-W Series ssembly type (straight plug/rm5w) 5 Ø.5 Ø.5 Mar..0 Copyright 0 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø Overview

More information

COMPACT FLAT SIZE FOR AUTOMOTIVE

COMPACT FLAT SIZE FOR AUTOMOTIVE PACT FLAT SIZE FOR AUTOMOTIVE RELAYS RoHS compliant FEATURES Compact flat type Flat size enables it to be built-in switch units. PC board terminal type: 9.5 mm.374 inch Surface-mount terminal

More information

Multi-Layer Power Inductors (IP_L Series)

Multi-Layer Power Inductors (IP_L Series) Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x

More information

No. P-KAB-001 DATE PRODUCTS DATA SHEET MICRO FUSE. Type KAB. UL/cUL approved File No.E17021 RoHS COMPLIANT LEAD FREE

No. P-KAB-001 DATE PRODUCTS DATA SHEET MICRO FUSE. Type KAB. UL/cUL approved File No.E17021 RoHS COMPLIANT LEAD FREE No. P-KAB-00 DATE 007-0 PRODUCTS DATA SHEET UL/cUL approved File No.E70 RoHS COMPLIANT MICRO FUSE Type KAB LEAD FREE Size 608/0 Type KAB micro fuse is designed for circuit protection against excessive

More information

Current Sensing Resistor Metal Foil Type >SMF Series

Current Sensing Resistor Metal Foil Type >SMF Series Page: 1 of 6 General Chip size from 0603 to Resistance value from 3mΩ to 200mΩ Low thermal EMF. Low TCR. Lead free, RoHS compliant for global applications and halogen free Application Switching model power

More information

Molded Chip Wirewound Inductors

Molded Chip Wirewound Inductors FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC

More information

FAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm

FAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm mm pitch FZ ONNETOR onnectors for FF Emboss Tape Features Zero insertion force mechanism (ZIF) ZIF mechanism improves wear resistance and extends the mating life of the connector. y moving the slider into

More information

Refer to CATALOG NUMBERS AND RATING. Fusing within 1 min if the current is 200% of rated current. K A B N A

Refer to CATALOG NUMBERS AND RATING. Fusing within 1 min if the current is 200% of rated current. K A B N A TYPE KAB (P-KAB-E004) Type KAB micro fuse is designed for circuit protection against excessive current in portable electronic equipment, electronic circuit around battery, etc. because the demand for high

More information

Anti-Surge Thick Film Chip Resistors

Anti-Surge Thick Film Chip Resistors FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±

More information

Power Supply Connectors For Industrial Equipment

Power Supply Connectors For Industrial Equipment ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

Product Compliant to DIN41612/IEC603-2 Standard

Product Compliant to DIN41612/IEC603-2 Standard Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type

More information

Product Specification

Product Specification Product Name : AEM Part Number : ES0402V014CT Customer : Customer Revision: 2 Date: 2011-09-08 AEM Components (Suzhou) Co., Ltd 458 Shenhu Road, Suzhou Industrial Park Jiangsu, P.R China, 215122 TEL: 86-512-6258-0028

More information

Anti-Surge Thick Film Chip Resistors

Anti-Surge Thick Film Chip Resistors FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE

More information

Refer to CATALOG NUMBERS AND RATING. Fusing within 1 min if the current is 200% of rated current. K A B N A

Refer to CATALOG NUMBERS AND RATING. Fusing within 1 min if the current is 200% of rated current. K A B N A TYPE KAB Type KAB micro fuse is designed for circuit protection against excessive current in portable electronic equipment, electronic circuit around battery, etc. because the demand for high capacity

More information

Miniature Waterproof Plastic Connectors

Miniature Waterproof Plastic Connectors NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter

More information

0.4/0.5mm Pitch 1.5mm Height High Speed Transmission (5 + Gbps) FPC Connectors

0.4/0.5mm Pitch 1.5mm Height High Speed Transmission (5 + Gbps) FPC Connectors 0.4/0.5mm Pitch 1.5mm Height High Speed Transmission (5 + Gbps) FPC Connectors FH55/FH55M Series Dimensions : 40 pos 4mm (depth) 23.4mm(FH55)/19.3mm(FH55M) Features 1. High-Speed Transmission(5 + Gbps)

More information

Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height

Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height Ultra Low-profile Interface Connectors with.0 mm Mounting Height LX Series Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Low profile on the PCB When mounted on the

More information

Adam Technologies, Inc.

Adam Technologies, Inc. INTRODUCTION: Adam Tech SMT PLCC Series Sockets are low profile, thin wall sockets designed to convert plastic leaded chips to a thru-hole PCB format on a " centerline grid. They conform to JDC MS 016

More information

INTRO FFC - Flat Flexible Cables Nicomatic s Flat Flexible Cable consists of tin plated copper conductors laminated between polyester films with a the

INTRO FFC - Flat Flexible Cables Nicomatic s Flat Flexible Cable consists of tin plated copper conductors laminated between polyester films with a the FLAT FLEXIBLE CABLES STANDARD PRODUCTS Nicomatic FFC cables are used in board to board interconnections and can be solderded or used with ZIF/LIF FFC VALUE ADDED OPTIONS Laser & die cutting, bends creasing,

More information

Surface Mount Fuses 1206 Size >Fast Acting>S1206-FA-8A~15A. General

Surface Mount Fuses 1206 Size >Fast Acting>S1206-FA-8A~15A. General Page: 1/ 6 General Fastacting 3.10mm 1.55mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -55 ~125 operating temperature Excellent environmental integrity RoHS

More information

Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch

Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height

More information

Power Inductors (IP Series)

Power Inductors (IP Series) Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &

More information

CF CARD CONNECTOR MA Type

CF CARD CONNECTOR MA Type Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type

More information

Product Specification AMP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version

Product Specification AMP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version Product Specification 108-60026 MP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version 1. 1.1 Scope: Contents: This specification covers the requirements for product performance, test methods and

More information

Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF

Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel

More information

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156HF Series Halogen Free Features 1. Low insertion loss 0.1 db typical at 6 Hz (not mated with the plug). 2. Space-saving design 2.7 mm x 2.7 mm

More information

High Current, Plastic Power Supply Connectors

High Current, Plastic Power Supply Connectors High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)

More information

125A High-Current Waterproof Connectors

125A High-Current Waterproof Connectors 125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure

More information

High Current, High Density, Power Connectors

High Current, High Density, Power Connectors High Current, High Density, Power Connectors MCN1 Series Features 1. High Current Applications Board-to-board connectors are UL certified for 27 A per contact. 2. Hirose's Unique Compliant Press-fit connection

More information

Pressure sensor with built-in amplification and temperature compensation circuit

Pressure sensor with built-in amplification and temperature compensation circuit sensor with built-in amplification and temperature compensation circuit PS-A PRESSURE SENSOR (built-in amplification and temperature compensating circuit) NEW FEATURES 1. Contains built-in amplification

More information

Platinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751

Platinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751 Data Sheet 906125 Page 1/5 Platinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751 Design type PCS/PCF For temperatures from -50 to +150 C (-70 to +250 C) In accordance with DIN

More information

0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors

0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors .4mm Pitch, 1.5 to 4.mm Height, Board-to-Board and Board-to-FPC Connectors DF4 Series Space saving Space saving Jun.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. High density

More information

Mini50 Unsealed Connector System 2.00mm Pitch

Mini50 Unsealed Connector System 2.00mm Pitch USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle

More information

SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.)

SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS - 87151-XXX9 REVISION: D PRODUCT NAME:

More information

Content (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18

Content (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18 Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition

More information

RI-80 SMDH Series Housed Dry Reed Switch

RI-80 SMDH Series Housed Dry Reed Switch formerly RI-80 SMDH Series Housed Dry Reed Switch RI-80 SMDH Series Ultra-micro dry-reed switch hermetically sealed in a gas-filled glass envelope. Single-pole, single-throw (SPST) type, having normally

More information

SA Series Breaker (Surface Mount Thermal Cutoff Device)

SA Series Breaker (Surface Mount Thermal Cutoff Device) *RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer

More information