Connections of the Various Units and Device Interiors. GT8 Series. High-Pressure Connectors <GT8, GT8A, GT8Z and GT8E>
|
|
|
- Alison Johnston
- 5 years ago
- Views:
Transcription
1 GT 16 GT 13 GT 5 PO5G GT 11 GT8 Series High-Pressure Connectors <GT8, GT8A, GT8Z and GT8E> GT 22 GT 25 GT 9 GT 8 GT 15 GT 18W GT 10 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 Features <GT8, GT8A, GT8Z> Crimp Terminals Use of an air-tight dimple construction at the contact portion serves to prevent oxidation of the contact portion. F Connector Housing Terminal number markings appear in a large size in consideration of insertion processing. Form designed to prevent erroneous insertion. M Connectors Designed with escape holes for washing liquid to escape so that secondary soiling may be prevented when the board has been washed. The surrounding wall of the terminal has been constructed higher than the terminal so as to prevent terminal bending. The others The F connector housing fits entirely inside of the M connector to prevent incomplete insertion and prevents twisting and other problems. The F connector is guarded so that there is no slanting nor contact movement, and the connector is resistant to vibration. The color of the F connector housing and the M connector have been changed to prevent incomplete insertion. M Connectors (SMT Product) Instead of using screws for board fastening, a lead reflow type of reinforced fitting is used that permits soldering at the time of reflow. Applications Internal connections of mobile units and industrial equipments. 200
2 F Connectors Terminals Part Number HRS No. Material Finish Packaging GT8-2428SCF(70) Phosphor bronze Tin plating 10,000 pcs/reel GT8-2022SCF Phosphor bronze Tin plating 10,000 pcs/reel GT8E-2022SCF Phosphor bronze Tin plating 10,000 pcs/reel GT8E-2428SCF Phosphor bronze Tin plating 10,000 pcs/reel Note : GT8-2428SC(70) loose terminals for hand tools are also available. There are 100 pieces per package. Housing (Without Flange) Part Number HRS No. Material Color Number of positions A dimension B dimension Packaging GT8Z-14DS-2C piece GT8Z-20DS-2C PBT Dark Gray piece GT8Z-24DS-2C piece Note : This product mates with GT8- or GT8A-*DP-2DSA(70) Lock A B A Applicable housing GT8-*DS-2C, GT8A-*DS-2C, GT8Z-*DS-2C GT8E-*S-2C, GT8E-*DS-2C, GT8E-*S-HU, GT8E-*DS-HU Part Number HRS No. Material Color Number of positions A dimension Specifications Packaging GT8-14DS-2C piece GT8-20DS-2C piece GT8-24DS-2C PBT Dark Gray piece GT8A-20DS-2C piece Without lock GT8A-24DS-2C piece Housing (With Flange) Lock Terminal No. GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT
3 GT 5 GT 13 GT8E Series F Connectors Single low Housing GT 3 GT 27 GT 26 GT 19 GT 8 GT 15 GT 18W GT 10 GT 7 GT 17 GT 11 PO5G GT 6W GT 16 Plug Applicable Applicable conductor AWG #20-22 GT8E-2022SCF GT8E *S-2C AWG #24-28 GT8B-2428SCF Part Number HRS No. Material Color Number of positions A dimension±0.15 Packaging GT8E-2S-2C piece PBT Black GT8E-8S-2C piece Note 1: Applicable terminal is GT8E-2022PCF. Note 2: Use this in combination with GT8EW-4P-R, GT8EW-4P/S-BR, GT8EW-4P/S-BHS. Note 3: Applicable housing is GT8E-W-4S-HU. GT 9 GT 25 GT 22 Single low Housing Plug Applicable Applicable conductor AWG #20-22 GT8E-2022SCF GT8E-8DS-2C AWG #24-28 GT8B-2428SCF Part Number HRS No. Material Color Number of positions Packaging GT8E-8DS-2C PBT Black 8 1piece Note 1: Applicable terminal is GT8E-2022SCF, GT8B-2428SCF(70). Note 2: Applicable housing is GT8E-*S-HU. 202
4 Housing (3 to 10 pos./single row) Plug Applicable Applicable conductor AWG #20-22 GT8E-2022SCF GT8E-*S-HU AWG #24-28 GT8B-2428SCF Part Number HRS No. Material Color Number of positions A dimension B dimension C dimension Packaging GT8E-3S-HU PBT Black piece GT8E-4S-HU PBT Black piece GT8E-5S-HU PBT Black piece GT8E-6S-HU PBT Black piece GT8E-7S-HU PBT Black piece GT8E-8S-HU PBT Black piece GT8E-10S-HU PBT Black piece Note 1: Applicable terminal is GT8E-2022SCF, GT8B-2428SCF. Note 2: This product mates with GT8E-*P-DS. Howsing (Double row) Plug Applicable Applicable conductor AWG #20-22 GT8E-2022SCF GT8E-*DS-HU AWG #24-28 GT8B-2428SCF Part Number HRS No. Material Color Number of positions A dimension B dimension Packaging GT8E-12DS-HU CL PBT Black piece GT8E-16DS-HU CL PBT Black piece GT8E-20DS-HU CL PBT Black piece GT8E-24DS-HU CL PBT Black piece Note 1: Applicable terminal is GT8E-2022SCF, GT8B-2428SCF. Note 2: This product mates with GT8E-*DP-DS GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT
5 GT 5 GT 13 M connector Board type(vertical Dip type) GT 22 GT 25 GT 17 GT 9 GT 27 GT 6W GT 3 GT 26 GT 8 GT 15 GT 18W GT 10 GT 7 GT 19 GT 11 PO5G GT 16 BRecommended Board Mounting Pattern Part Number HRS No. Number of positions A dimension B dimension C dimension D dimension E dimension Packaging GT8E-4P-DSA piece GT8E-7P-DSA piece
6 Board type(s.m.t. 8pos) BRecommended Board Mounting Pattern Board type(small-size S.M.T.) BRecommended Board Mounting Pattern Note 1: Applicable housing is GT8E-*S-HU. Material PBT(Housing) Brass(Contact) Brass(Metal fitting) Color/Finish Black Tin plated Tin plated Part Number HRS No. Material Color/Finish Packaging PPS(Housing) Black GT8E-8DP-2H(70) Brass(Contact) Tin plated 400pcs/reel Brass(Reinforced fitting) Tin plated Note 1: Applicable housing is GT8E-8DS-2C. Part Number HRS No. Number of positions A dimension B dimension C dimension D dimension E dimension F dimension Packaging GT8E-2P-2H(70) pcs/reel GT8E-3P-2H pcs/reel GT8E-4P-2H pcs/reel +- GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT
7 GT 5 Board type(small-size 8/2pos) GT 11 GT 17 GT 27 GT 3 GT 8 GT 15 GT 18W GT 10 GT 7 GT 6W GT 25 GT 22 GT 9 GT 26 GT 19 PO5G GT 16 GT 13 BRecommended Board Mounting Pattern Part Number HRS No. Material Finish Packaging PPS(Housing) Black GT8E-8/2P-2H(70) Brass(Contact) Tin plated 500pcs/reel Brass(Metal fitting) Tin plated Note 1: Applicable housing is GT8E-8S-2C. Board type(8/5pos) BRecommended Board Mounting Pattern Part Number HRS No. Material Finish Packaging PPS(Housing) Black GT8E-8/5P-2H Brass(Contact) Tin plated 500pcs/reel Brass(Metal fitting) Tin plated Note 1: Applicable housing is GT8E-5S-HU, GT8E-8S-2C. 206
8 Board type(single raw DIP type) Note1 : Applicable housing is GT8E-*S-HU Note2 : GT8E-2P-DS mates with GT8E-2S-2C. Boad type(double row DIP type) Material PBT(Housing) Brass(Contact) Brass(Metal fitting) BRecommended PCB Mounting Pattern Finish Black Tin plated Tin plated Note : Applicable housing is GT8E-*DS-HU Material PBT(Housing) Brass(Contact) Brass(Metal fitting) Part Number HRS No. Number of potions A dimension B dimensions C dimension D dimension E dimension F dimension Packaging GT8E-2P-DS ± ±0.5 2± ±0.5 2± ±0.5 1piece GT8E-3P-DS ± ±0.5 4± ±0.5 4± ±0.5 1piece GT8E-4P-DS ± ±0.5 6± ±0.5 6± ±0.5 1piece GT8E-5P-DS ± ±0.5 8± ±0.5 8± ±0.5 1piece GT8E-6P-DS ± ±0.5 10± ±0.5 10± ±0.5 1piece GT8E-7P-DS ± ±0.5 12± ±0.5 12± ±0.5 1piece GT8E-8P-DS ± ±0.5 14± ±0.5 14± ±0.5 1piece GT8E-10P-DS ± ±0.5 18± ±0.5 18± ±0.5 1piece BRecommended PCB Mounting Pattern Part Number HRS No. Number of potions A dimension B dimensions C dimension D dimension E dimension F dimension Packaging GT8E-12DP-DS ± ±0.3 14± ±0.2 14± ± piece GT8E-16DP-DS ± ±0.3 18± ±0.2 18± ± piece GT8E-20DP-DS ± ±0.3 22± ±0.2 22± ± piece GT8E-24DP-DS ± ±0.3 26± ±0.2 26± ± piece Finish Black Tin plated Tin plated GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT
9 GT 5 GT 13 GT 16 In-Line Type GT8E-*P-HU (23.2) GT8E-*S-HU GT 17 GT 19 GT 8 GT 15 GT 18W GT 10 GT 7 GT 26 GT 27 GT 3 GT 6W GT 11 PO5G A 21.8± ±0.15 2±0.15 B Part Number HRS No. Material Color Number of positions A dimension B dimension Packaging GT8E-3P-HU ± piece GT8E-4P-HU PBT BLACK ± piece GT8E-8P-HU ± piece Note1 : Applicable terminal is GT8E-2022PCF, GT8E-2428PCF Note2 : Mate with GT8E-*S-HU(8pos:GT8E-8S-2C) GT 9 GT 25 GT 22 Plug Applicable Applicable conductor GT8EW-4P-HU AWG #20-22 GT8E-2022PCF Part Number HRS No Number of positions Packaging GT8EW-4P-HU piece Note 1: Applicable terminal is GT8E-2022PCF. Note 2: Use this in combination with GT8EW-4P-R, GT8EW-4P/S-BR, GT8EW-4P/S-BHS. Note 3: Applicable housing is GT8E-W-4S-HU. 208
10 In-line socket (water proof) Plug Applicable Applicable conductor GT8EW-4S-HU AWG #20-22 GT8-2022SCF Part Number HRS No Number of positions Packaging GT8EW-4S-HU piece Note 1: Applicable terminal is GT8E-2022SCF. Note 2: Use this in combination with GT8EW-4P-R, GT8EW-4P/S-BR, GT8EW-4P/S-BHS. Note 3: Applicable housing is GT8E-W-4P-HU. Retainer (Only for GT8EW-4P-HU) Part Number HRS No Packaging GT8EW-4P-R piece Note : Use this in combination with GT8EW-4P-HU. Retainer (Only for GT8EW-4S-HU) Part Number HRS No Packaging GT8EW-4S-R piece Note : Use this in combination with GT8EW-4S-HU. GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT
11 GT 5 Retainer (Used with GT8EW-4P-HU, GT8EW-4S-HU) GT 11 GT 22 GT 17 GT 19 GT 8 GT 15 GT 18W GT 10 GT 7 GT 6W GT 9 GT 3 GT 27 GT 26 PO5G GT 16 GT 13 Part Number HRS No Packaging GT8EW-4P/S-BR piece GT 25 Note : Use this in combination with GT8EW-4P-HU, GT8EW-4S-HU. Bushing (Used with GT8EW-4P-HU, GT8EW-4S-HU) Part Number HRS No Packaging GT8EW-4P/S-BHS piece Note : Use this in combination with GT8EW-4P-HU, GT8EW-4S-HU. B In line waterproof connector use hand book 1Climp the terminal and insert it into the in-line plug/socket. And mount the retainer. 2Fit the parts to the in-line plug/socket in following order:bushing and Retainer. 210
12 B Termination Tools User's manuals are available. Please contact a Hirose Electric account representative. Automatic Crimping Machine Part number CM-105 Applicator Product Number AP105-GT8-2428S Hand Tool Product Number HT102/GT8E-2428S HT304/GT8E-2022S HRS No The photograph shows just one example. The product is subject to change. Specifications Item Specification Remarks Specification Stroke length 1.5ton 30mm Number of strokes 200 spm (50 Hz) 240 spm (60 Hz) Wight 75 kg Motor 0.2kw AC100V Crimping speed 2,000 to 4,000 pcs. per Hour * Crimp height setting tables are available for each cable type. Please contact your nearest Hirose Electric account representative. Different cables will requires different crimp height settings. GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT
GT11 Series. Connectors for shielded cables. Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT 22 GT 25 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 PO5G GT 16 GT 10 GT 18W GT 9 GT 8 GT 15 GT 13 GT 5 GT11 Series Connectors for shielded cables Features A housing lance systems has been used to
GT16 Series. Subminiature Connectors for coaxial cables
GT5 Sep.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT16 GT13 GT16 Series Subminiature Connectors for coaxial cables
GT32 Series Shielded connector for high speed transmission / USB3.0, HDMI For Network, High speed communication
Sep..208 Copyright 208 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. GT32 Series ---- Shielded connector for high speed transmission / USB3.0, HDMI.4 ---- Features Full shielded structure Suitable for
For Antenna. In-vehicle shielding connector with twin crimp technology. GT5 Series Connectors for coaxial cables ----
Patented GT In-vehicle shielding connector with twin crimp technology GT6 GT6 GT GT2 GT In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems, RACS antenna
2mm pitch, high reliability with lock, board to cable and cable to cable connector
NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
1.25mm Pitch Super Low profile Crimping Connector
1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height
0.5mm Pitch SMT Board to Board Connector
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
Product Compliant to DIN41612/IEC603-2 Standard
Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
0.5mm Pitch SMT Board-to-Board Connector
0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
STRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
Multi-Pole Rectangular Connectors Specifications Table
Multi-Pole Rectangular Connectors Specifications Table Multi-Pole Rectangular Connectors Specifications Table Number of Poles Rating Insulation Resistance Dielectric Strength Contact Resistance Insertion
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The
Low Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
High Current Connector
High Current Connector Series 1U Nov.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Features 1. Power contact supports up to 10 mps (210/1pin Derating curve, ambient temp 2 C) with
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
Half-pitch and Multi-function Two Piece Connector
Half-pitch and Multi-function Two Piece Connector FX2 Series Sttacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various
2.54mm Pitch Card Edge Connector
2.54mm Pitch Card Edge Connector CR22 Series Product Standards Rating Current rating: 3A Voltage rating: 0VAC Operating Temperature Range: - to +85ç (Note 1) Operating Humidity Range: 40 to % Storage Temperature
0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors
.5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached
1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB
0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
Water-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
Miniature Waterproof Plastic Connectors
NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter
0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
.4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type)
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type) Double-sided two point Contact System Features 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard.
1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
High Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
0.4 mm Contact Pitch, Board-to-FPC Connectors
0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure Two-point contact system Features 1. Two stacking height options Two separate heights
3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
CF Card Connectors. Complies with Compact Flash Association. MI20/21 Series. Features. Applications
CF Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth for miniaturization
2mm Pitch Miniature Connector for HDD
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
I/O Card Interface Connectors
I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal
Power Supply Connectors For Industrial Equipment
Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (0/
3.5mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard)
3.mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard) MDF6 Series Inner type positive lock Features 1. Miniature type with 3.mm pitch A miniature, space-saving
New Connectors For Low Profile Power Supply
NEW New Connectors For Low Profile Power Supply RP34L Series Receptacle installed height RP34L Existing RP34 (3-contact type) (2-contact type) Fig.-➀ Features 1. Low profile: These receptacles are designed
Sealed Sensor Connector (SSC) System
Introduction Product Features Robust housing, glass filled PBT for high temperature applications Terminal Position Assurance (TPA) to assure proper position of contact in housing Damage protected internal
0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
BH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
CF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
Picoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
UB CONNECTOR. 1Certified LR USB (Universal Serial Bus) Conforming Connector. Features. Specifications. Standards
USB (Universal Serial Bus) Conforming Connector Features Conforms to USB (Universal Serial Bus) standards This connector conforms to the USB standards, that stipulate the serial interface between PC's
Mini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector FH63 Series Single action lock (Dimension diagram : 30pos.) 2.8mm 21.94mm Features 1. Automatic single
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
High speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together
Power Supply Connectors For Industrial Equipment
ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz
NEW Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156NB Series Overview Developed for inspection of high frequency circuits used in portable terminals.verification of the circuit performance is
0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features
M40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
Wire to Board Connectors - SMT Type CONNECTOR - Side Entry Part No.: MS242610R~MS242614R Suitable Contact: 2426PS PS-2RF:C 2426PS-2RF:E Suitable
Pitch Wire to Board Connectors - SMT Type C/DC 100V 2 Insulation Resistance: 1000M min. CONNECTOR - Top Entry Part No.: MS24262~MS242616 RF: Suitable Contact: 2426PS-2 2426PS-2RF:C 2426PS-2RF:E Note: Letters
Compact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth
High Current, Plastic Power Supply Connectors
High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)
Automotive Connectors HIGH SPEED INNOVATION AUTOMOTIVE APPLICATIONS HIROSE ELECTRIC U.S.A. HIROSE ELECTRIC U.S.A.
C O N N E C T I N G T HE F U T UR E HIGH SPEED INNOVATION AUTOMOTIVE APPLICATIONS Instrument Cluster Infotainment Antenna Battery/Inverter ADAS LiDAR Lighting Infotainment & Cluster Product B r o c hur
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
Compact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI20/21 Series (a)space-saving design 7.0 51.75 Features 1. Compact design occupies minimum space Connectors are designed with small
MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors
0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors DF36 Series High contact reliability Effective mating length of 0.4 mm 1.5±0. (Mated height) (0.4) (Effective mating length) Enhanced
High Voltage Wire-to-Board Connectors
High Voltage Wire-to-Board Connectors MDF51 Series Simple and secure mating with one push Socket Header Lock Fig.1 Features Secure hold during the soldering operation 1. Simple, one step mating Built-in
0.8mm Pitch, Compact and Robust Wire-to-Board Connectors
0.8mm Pitch, Compact and Robust Wire-to-Board Connectors DF52 Series Small and robust structure Board side Cable side Thick wall parts Thick wall parts Features 1. Small-sized connector 0.8mm Pitch, 1.75mm
HPH PCB/MALE CABLE HPH SERIES PERFORMANCE/SPECIFICATION
PCB/ CABLE Straight TBS, R/A TBS, male crimp, Flex SMT, solder bucket, stacking, pin carrier Pin size/current: 0.6mm/4 amp Pitch: 1.905mm/0.075" on a staggered pitch of 0.953mm/0.0375 No. of contacts:
0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors
0.4 mm Pitch, 0.6 and mm Height, Board-to-Board and Board-to-FPC Connectors BM20 Series BM20 2.3mm Existing products 2.98mm Receptacle A 22.3% reduction in size! 2.98 0.4 =About 3.0mm2 Header BM20 2.3
M8 Series. Key features: BUCCANEER
Bulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory automation
0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors
0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors BM20 Series Receptacle Existing products BM20 2.3mm 2.98mm 10.4mm 10.48mm Existing products A 22.3% reduction in size! BM20
Connector for Internal Serial Transmission. FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-2 October 2008 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
0.5mm and 1mm Pitch Connectors For FPC/FFC
0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. Ease of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock)
High speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together
125A High-Current Waterproof Connectors
125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure
Z b. General Purpose Relays PCB Relays SCHRACK. Power PCB Relay RT1
Power PCB Relay RT1 n 1 pole 12A/16A, 1 form C (CO) or n DC or AC coil n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85 C (DC coil) n WG version: product in accordance to IEC 60335-1
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
.4mm Pitch, 1.5 to 4.mm Height, Board-to-Board and Board-to-FPC Connectors DF4 Series Space saving Space saving Jun.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. High density
Ethernet Buccaneer BUCCANEER DATA. bulgin
BUCCANEER FOR DATA bulgin Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of Panel maintains
Circular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
Pressure sensor with built-in amplification and temperature compensation circuit
sensor with built-in amplification and temperature compensation circuit PS-A PRESSURE SENSOR (built-in amplification and temperature compensating circuit) NEW FEATURES 1. Contains built-in amplification
HCMCONNECTOR HCM. Board-to-wire/Wire-to-wire. Features. Specifications
Board-to-wire/Wire-to-wire HCM.64 non-waterproof low profile type connector for automobile corresponding to the miniaturization of the automotive electrical equipment. Comply with the performance specification
Adam Technologies, Inc.
INTRODUCTION: Adam Tech SMT PLCC Series Sockets are low profile, thin wall sockets designed to convert plastic leaded chips to a thru-hole PCB format on a " centerline grid. They conform to JDC MS 016
Peel-off & Pull-out forces for WECO SMD-connectors State:
Peel-off & Pull-out forces for WECO SMD-connectors State: 02.2015 General note: The pull-out or peel-off forces of the solder joint are depending also on the quality of the solder joint and the PCB as
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
0.3mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors
0.3mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors DF56 Series High contact reliability Features 1.Small mated height and board occupied space Small pitch (0.3mm) and mated height (1.25mm)
AMP STACK III Modular connection system
III Modular connection system The AMP STACK MARK III 25 pair are designed to mass terminate communication cables of solid copper or aluminum conductor wires ranging from 0.32 to 0.8 mm of diameter, (28
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors RM-W Series ssembly type (straight plug/rm5w) 5 Ø.5 Ø.5 Mar..0 Copyright 0 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø Overview
Data sheet E-DAT Industry patch cord V6 IP67 - RJ m
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification fully shielded Cat.6 patch cable AWG 26/7 S/FTP with PUR cable sheath 1 x RJ45 and 1 x RJ45-IP67-V6
Ethernet Buccaneer IP68 BUCCANEER FOR DATA BUCCANEER DATA
IP68 Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of Panel maintains IP68 seal to panel