GT11 Series. Connectors for shielded cables. Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
|
|
|
- Ursula Anis Carter
- 5 years ago
- Views:
Transcription
1 GT 22 GT 25 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 PO5G GT 16 GT 10 GT 18W GT 9 GT 8 GT 15 GT 13 GT 5 GT11 Series Connectors for shielded cables Features A housing lance systems has been used to prevent binding between contacts. Lock-release latching system 84
2 For Double-Conductor shielded cable F Connectors Outer terminals HRS No. Applicable Cable Item Material GT11-2S-5.2C(70) to 5.2mm Outer terminal Brass GT11-2S-6.0C(70) to 6.2mm Insulator Note : The suitable terminals might differ depending on the internal structure of the cable. Inner Terminals HRS No. Conductor Size (AWG) Material Finish Packaging GT SCF(70) GT SCF(70) M Connectors Outer terminals Note : The suitable terminals might differ depending on the internal structure of the cable. Inner Terminals #18 to 22 #24 to 28 HRS No. Applicable Cable GT11-2P-5.2C(70) GT11-2P-6.0C(70) to 5.2mm 5.8 to 6.2mm Phosphor Bronze HRS No. Conductor Size (AWG) Material Finish Packaging GT PCF(70) GT PCF(70) #18 to 22 #24 to 28 Item Outer terminal Insulator Brass 8,000 pcs /reel 8,000 pcs/reel Material Brass Color/Finish Dark Gray *Sold by the reel. Color/Finish Dark Gray GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT 22 85
3 GT 5 GT 13 GT 16 For Double-Conductor shielded cable F Connectors BShown with inserted retainer (13.4) PO5G 30 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 HRS No. Material Color GT11-2S-HU Light Gray M Connectors CAV No BShown with inserted retainer 13.7 GT 10 GT11-2P-HU GT 18W GT 8 GT 25 GT 9 GT 15 HRS No. Material Color Light Gray BShown with inserted retainer BFully mated connector assemblies GT 22 GT11N-2PP-HU HRS No. Material Color Light Gray 86
4 M Connectors GT11-2P-DS(70) BRecommended Board Mounting Pattern HRS No. Material Finish Color (Gang Type) (Straight Type) Brass Phosphor bronze Light Gray Dark Gray HRS No. Material Finish Color GT11X-2/2P-DS(70) Brass Phosphor bronze Light Gray Dark Gray HRS No. Material Finish Color Brass GT11-2P-DSA(70) Phosphor bronze Phosphor bronze Light Gray BFully mated connector assemblies BRecommended Panel Cut-out BRecommended Board Mounting Pattern BRecommended Board Mounting Pattern BFully mated connector assemblies GT11-2S-HU GT11-2P-DSA(70) T=1.6 GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT 22 87
5 GT 5 GT 13 Waterproof type For Double-Conductor shielded cable F Connectors 45.4 PO5G GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 GT 10 GT 18W GT 8 GT 22 GT 15 GT HRS No. Material Color GT11W-2S-HU Light Gray M Connectors HRS No. Material Color GT11W-2P-HU Light Gray BFully mated connector assemblies GT 9 GT BFully mated connector assemblies GT11WM-2P-HU HRS No. Material Color --- Light Gray (It is planning) 88
6 Retainer (Used with GT11W-2S-HU and GT11W-2P-HU) GT11W-6.0R HRS No Material Silicon rubber compound Retainer (Used with GT11W-2S-HU and GT11W-2P-HU) Retainer Cover Note : Waterproofness will depend on the cable. Please contact a Hirose Electric sales representative for further information when using this product. (It is planning) GT11W-5.2R HRS No. - Material Silicon rubber compound Note : Waterproofness will depend on the cable. Please contact a Hirose Electric sales representative for further information when using this product. (It is planning) GT11WM-COVER(A),(B) Note : for GT11WM-5.2R HRS No. - Material Silicon rubber compound GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT 22 89
7 GT 5 BTermination sequence GT 13 Strip the cable. Insert the internal terminals into the Outer terminals. GT 16 Jacket Shield The joined side of the crimp portion faces upward (for both male and female). GT 9 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 GT 18W GT 10 PO5G Cut the shield and expose the wire. Cut back the shield above the jacket and wrap with conductive tape. conductive tape Strip the wire and form it. Wire Conductor Crimp the Outer terminal. The shield must be visible. Jig used: Outside tube caulking jig. (Refer to Page 103 for detail.) GT 15 GT 8 Crimp the wire to the internal terminal. GT 25 GT 22 less than 1mm Mount the retainer to complete the task. Jig used: Automatic crimping machine. (Refer to Page 103 for detail.) Refer to Page 96 for information about the retainer mounting method. 90
8 BRetainer Mounting Method a. Insert so that the terminal locking tab is inserted between the top surface of the terminal and the housing. b. Push in while changing the angle of the retainer until the front surface comes to a stop. c. Press the rear portion of the retainer and snap it into the locked position. d. If locking is not complete, press the rear portion of the retainer again while pulling it backward. * Check that all locations are locked. GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT 22 91
9 PO5G GT 16 GT 13 GT 5 BTermination Tools User's manuals are available. Please ask your Hirose Electric account representative. Automatic Crimping Machine (for 2-conductor and 8-conductor cable) The photograph shows just one example. The product is subject to change. Specifications GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 CM-105 Note: See the table below for the applicator product number. Product No. GT SCF(70) GT PCF(70) GT SCF(70) GT PCF(70) Outer Terminal Crimping tool Applicator Product No. (2 conductor) Applicator Product No. (8 conductor) Applicator 105-GT S-2 Applicator 105-GT P-2 Applicator 105-GT S-2 Applicator 105-GT P-2 Applicator 105-GT S Applicator 105-GT P Applicator 105-GT S Applicator 105-GT P Please contact a sales representative for information about the outer terminal crimping tool. Item GT 22 GT 25 GT 9 GT 8 GT 15 GT 18W GT 10 Capacity Stroke Number of strokes Weight Motor Crimping speed Specification 1.5tons 30mm 200spm (50Hz) 75kg 0.2kW 2000 to 4000 pcs/hour Remarks 200spm (60Hz) AC100V 92
10 For 8-Conductor shielded cable F Connectors Inner Terminal HRS No. Conductor Size (AWG) Material Finish GT SCF(70) #18 to 22 Phosphor bronze GT SCF(70) #24 to 28 Phosphor bronze Insulator HRS No. Material GT11-8DS-2.8C Outer terminals HRS No. Material Finish GT11-8DS-5C(70) Brass GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT 22 93
11 GT 5 Shield Plate GT 9 GT 15 GT 10 PO5G GT 16 GT GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 HRS No. Material Finish GT11-8DS-SB(70) Brass HRS No. Material GT11-8DS-HU GT 18W Retainer (used with GT11-8DS-HU) GT 8 GT GT 22 HRS No. Material GT11-8DS-6R
12 M Connectors Inner Terminals HRS No. Conductor Size (AWG) Material Finish GT PCF(70) #18 to 22 Brass GT PCF(70) #24 to 28 Brass Insulator HRS No. Material GT11-8DP-2.8C Outer terminal HRS No. Material Finish GT11-8DP-5C(70) Brass * Sold by the reel (8,000 pcs/reel) GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT 22 95
13 GT 5 Shield Plate GT 13 GT GT 25 GT 10 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 GT 18W GT 9 PO5G HRS No. Material Finish GT11-8DP-SB(70) Brass HRS No. Material GT11-8DP-HU Retainer (Only for GT11-8DS-HU) GT GT GT 22 HRS No. Material GT11-8DP-6R --- (It is planning) 6 96
14 Board Type HRS No. Item Material Finish GT11-8DP-2.8DS(70) Outer Terminal Phosphor bronze Insulator Terminal Brass GT11-8DP-2.8DS(70) Board BRecommended Board Mounting Pattern BFully mated connector assemblies 44 GT11-8DS-2.8C GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT 22 97
15 GT 5 GT 13 BTermination sequence Strip the Jacket. Insert the inner terminals into the insulated case. GT 16 Jacket Shield Inshulated case GT 22 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 GT 18W GT 15 GT 8 GT 25 GT 9 GT 10 PO5G Cut the shield and expose the wire. Cut back the shield above the jacket and wrap with conductive tape. Strip the wire. Wire Conductive tape Insert what was made in Step into the Outer terminal. Insert the caulking shield cover onto the Outer terminal. Outer terminal Shield cover Insert what was made in Step into the housing. Crimp the internal terminals. Insert the retainer. Internal terminal Retainer Completion 98
16 BTermination Tools User's manuals are available. Please ask your Hirose Electric account representative. Automatic Crimping Machine (for 2-conductor and 8-conductor cable) Specifications The photograph shows just one example. The product is Item Specification Remarks subject to change. Capacity 1.5Ton Stroke 30mm Number of strokes 200spm (50Hz) 240spm (60Hz) Weight 75kg Motor 0.2kW AC100V Crimping speed 2000 to 4000 pcs. per hour Product Number Applicator Product Number (2-conductor type) Applicator Product Number (8-conductor type) CM-105 GT SCF(70) Applicator 105-GT S-2 Applicator 105-GT S GT PCF(70) Applicator 105-GT P-2 Applicator 105-GT P GT SCF(70) Applicator 105-GT S-2 Applicator 105-GT S GT PCF(70) Applicator 105-GT P-2 Applicator 105-GT P Outer terminal Caulking Jig (for 8-conductor cable) Hand Press GT11-8S/P-HP GT 5 GT 13 GT 16 PO5G GT 11 GT 17 GT 19 GT 26 GT 27 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 GT 22 99
Connections of the Various Units and Device Interiors. GT8 Series. High-Pressure Connectors <GT8, GT8A, GT8Z and GT8E>
GT 16 GT 13 GT 5 PO5G GT 11 GT8 Series High-Pressure Connectors GT 22 GT 25 GT 9 GT 8 GT 15 GT 18W GT 10 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 Features Crimp
For Antenna. In-vehicle shielding connector with twin crimp technology. GT5 Series Connectors for coaxial cables ----
Patented GT In-vehicle shielding connector with twin crimp technology GT6 GT6 GT GT2 GT In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems, RACS antenna
GT16 Series. Subminiature Connectors for coaxial cables
GT5 Sep.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT16 GT13 GT16 Series Subminiature Connectors for coaxial cables
GT32 Series Shielded connector for high speed transmission / USB3.0, HDMI For Network, High speed communication
Sep..208 Copyright 208 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. GT32 Series ---- Shielded connector for high speed transmission / USB3.0, HDMI.4 ---- Features Full shielded structure Suitable for
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
Miniature Waterproof Plastic Connectors
NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter
Low Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
I/O Card Interface Connectors
I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
2mm pitch, high reliability with lock, board to cable and cable to cable connector
NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The
3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
Assembly Instruction. EL OCHITO BLUE CONTACTS SuperSpeed USB TYPE I: PIN /SKT CABLE:
AI85114-02 Assembly Instruction EL OCHITO BLUE CONTACTS SuperSpeed USB TYPE I: PIN 858-028-01/SKT 858-029-01 CABLE: 963-118 Revision History Rev Date Initiated By Approved 1 07/16/18 WLL GH 1.0 Tools Tools
New Connectors For Low Profile Power Supply
NEW New Connectors For Low Profile Power Supply RP34L Series Receptacle installed height RP34L Existing RP34 (3-contact type) (2-contact type) Fig.-➀ Features 1. Low profile: These receptacles are designed
3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
Assembly Instruction EL OCHITO WHITE CONTACTS 1000BASE-T/10GBASE-T TYPE I: PIN /SKT CABLE: S/FTP
AI85112-02 Assembly Instruction EL OCHITO WHITE CONTACTS 1000BASE-T/10GBASE-T TYPE I: PIN 858-003-02/SKT 858-032-02 CABLE: 963-033-26 S/FTP Revision History Rev Date Initiated By Approved 1 07/05/18 WLL
High Current Connector
High Current Connector Series 1U Nov.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Features 1. Power contact supports up to 10 mps (210/1pin Derating curve, ambient temp 2 C) with
High Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
1.25mm Pitch Super Low profile Crimping Connector
1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height
Water-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
0.5mm Pitch SMT Board to Board Connector
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB
0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors
.5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached
7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
STRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
0.5mm Pitch SMT Board-to-Board Connector
0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
Coaxial Snap-Lock Connectors
Coaxial Snap-Lock Connectors Application Specification 114-13010 11 APR 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
BH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
Sealed Sensor Connector (SSC) System
Introduction Product Features Robust housing, glass filled PBT for high temperature applications Terminal Position Assurance (TPA) to assure proper position of contact in housing Damage protected internal
Product Compliant to DIN41612/IEC603-2 Standard
Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
High Current, Plastic Power Supply Connectors
High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)
Waterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Features 1. Waterproof The JR-W series is a rugged, waterproof connector series that is IP67 and IP68 rated in the mated condition. IP67: Left in water at a depth
Waterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16
ELB ELB
ELB-35-600 ELB-35-610 600A T-Body Elbow Connectors for Copper Tape (CT), Jacketed Concentric Neutral (JCN), and Concentric Neutral (CN) cables up to 35kV class Safety Instructions When installing electrical
FAKRA Automated In-Line Connector System
FAKRA Automated In-Line Connector System Application Specification 114-32145 05 JAN 2017 Rev H All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
.4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization
SMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors RM-W Series ssembly type (straight plug/rm5w) 5 Ø.5 Ø.5 Mar..0 Copyright 0 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø Overview
Connecting to DC Power
APPENDIXC This appendix describes how to make DC power connections to the Catalyst 3750G-12S-SD switch. See the Installing the Switch section on page 2-11 for instructions on installing the switch. To
* E8MS-N1 is only 1-channel pressure sensor controller. E80-C2 can be used. For more details, please refer to E80 catalogue.
Authorised Distributors:- ASH & ALAIN INDIA PVT LTD S-, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-(India) Tel : -7977 Fax : -7977 E-mail : sales@ashalain.com Sensor Four-Input-Channel Sensor
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
Half-pitch and Multi-function Two Piece Connector
Half-pitch and Multi-function Two Piece Connector FX2 Series Sttacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged
circuit protection & wiring accessories
circuit protection & wiring accessories J J1 circuit breakers Circuit breakers and fuses are a cost-effective solution to protecting wiring, equipment and subsystems. While fuses are a one-time, disposable
Series 110 MK III, Series 187 MK II and MK III, Series 250 MK II, MK III, and RAST 5 & 7
Series 110 MK III, Series 187 MK II and MK III, Series 250 MK II, MK III, and RAST 5 & 7 Application Specification 114-2074 13 JAN 17 Rev L All numerical values are in metric units [with U.S. customary
Connector Systems Inc. SS-20 MACHINE MANUAL
Connector Systems Inc. SS-20 MACHINE MANUAL INTRODUCTION Your SS-20 machine comes to you fully equipped and set up to terminate the style of plug you have requested. Our SS-20N will accommodate those
0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features
2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
CONTENTS. This Product is Certified by CANADIAN STANDARDS ASSOCIATION and Bears the Mark:
This Product is Listed by UNDERWRITERS LABORATORIES INC. and Bears the Mark: This Product is Certified by CANADIAN STANDARDS ASSOCIATION and Bears the Mark: SLATER SCD Installation Instructions For Self-Contained
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
Standard Timer Connectors
Standard Timer Connectors Application Specification 114-49003 22 FEB 12 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
E E VDC COOLEDGE TILE INTERIOR INSTALLATION INSTRUCTIONS. Caution: Observe precautions for handling electrostatic sensitive devices.
5 YEAR WARRANTY 5 YEAR WARRANTY COOLEDGE TILE INTERIOR INSTALLATION INSTRUCTIONS E354088 LISTED AC E354088 58VDC E354088 E354088 5 5 YEAR WARRANTY 5 YEAR WARRANTY E354088 Caution: Observe precautions for
EPIC. Connector Accessories CONNECTOR ACCESSORIES. Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands
CONNECTOR ACCESSORIES Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands D Series Pressure Screws 413 U Series Washers 413 Sealing Rings 413 Neoprene & Viton Concentric Sealing
AMPLIMITE* HDP- 20 and Economy
AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
Rejuvenation Instructions
Rejuvenation Instructions #541 200A Live-Front Terminations UPR This NRI covers the following: How to prepare 200amp live-front terminations for injection. How to install the two approved live-front termination
Circular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
M40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
Cold Shrink QS T Trifurcating Transition Splice Kit
Cold Shrink QS2012-13-3T Trifurcating Transition Splice Kit Instructions IEEE Std. 404-1993 15 kv Class 110 kv BIL Completed Splice Cable Size Range Requirements PILC 500 kcmil Conductor Size (240 mm 2
Table of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
Installation Instructions K656CY, K656CH and K656I Deadbreak Receptacles
Installation Instructions K656CY, K656CH and K656I Deadbreak Receptacles IS---K656CY,CH,I Page 1 of 6 CONTENTS: Receptacle housings, Cable adapters, I, Wye or H Center sections, Aluminum holding collars,
Loadbreak Elbows. 3 Loadbreak Elbows. 200 Amp 5-15 kv Industrial pg Loadbreak Elbows. 200 Amp 25 kv Industrial pg. 254.
3 Loadbreak Elbows 200 Amp 5-15 kv Industrial pg. 252 Loadbreak Elbows 200 Amp 25 kv Industrial pg. 254 Loadbreak Elbows 200 Amp Industrial pg. 255 Loadbreak Elbows Accessories 3 Loadbreak Elbows 3M 200
Application Specification Pin&3Pin Miniature waterproof connector 28July2016 REV: C
Application Specification 114-137093 2Pin&3Pin Miniature waterproof connector 28July2016 REV: C 1. INTRODUCTION This specification covers the requirements for application of 2Pin&3Pin Miniature waterproof
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
American Standard ProAx Triaxial Camera Connectors Installation Instructions
American Standard ProAx Triaxial Camera Connectors Installation Instructions Content Page INTRODUCTION............................................................................. 1 Revision History........................................................................
Classic Update Series L FRONT LIGHT KIT OPTIONAL Add-On Equipment: Look! Mopar B-body Weatherproof Universal Relay Kit
engine harness connector assembly ready to bolt onto firewall bulkhead apply silicone sealant to back side of connector after installing terminals Page 1 ook! front light connector American Autowire also
FAKRA-Compliant SMB Gen-4 Connector System
FAKRA-Compliant SMB Gen-4 Connector System Application Specification 114-13157 25 MAR 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in
Amphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
1 GENERAL INFORMATION
Broadcast and Entertainment Products ProAx Triaxial Camera Connectors Installation Instructions Content Page 1 GENERAL INFORMATION... 2 1.1 Standard Tools... 3 1.2 ADC ProAx Triaxial Cable Strip Gauge...
MMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
Installation Instructions
517 Lyons Ave, Irvington, NJ 07111 Phone: 973-371-1771 Fax: 973-371-4304 Installation Instructions Deadbreak Elbow Applicable Current Ratings 600A (Aluminum) 900A (Copper) Applicable Catalog Prefix 35kV
3 Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8 Series
3 Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8 Series Data Sheet 1. Product Description 3M Cold Shrink Termination Kit QT-III 7672-S-8 Series contains one silicone rubber termination
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board mounting
Ethernet Buccaneer BUCCANEER DATA. bulgin
BUCCANEER FOR DATA bulgin Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of Panel maintains
Application Specification
FAKRA-Compliant SMB Gen-4 Connector System Application Specification 114-13157 26 JAN 18 Rev V NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
Instructions for installing Extendable Replacement Mirrors for Ford HD vehicle.
Instructions for installing Extendable Replacement Mirrors for Ford HD vehicle. Manual CIPA # 82100 Right Hand #82110 Left Hand #82111 Electric CIPA # 72100 #72110 #72111 Heated / Electric CIPA # 72500
125A High-Current Waterproof Connectors
125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure
MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
0.4 mm Contact Pitch, Board-to-FPC Connectors
0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure Two-point contact system Features 1. Two stacking height options Two separate heights
REARSENTRY TM BASE KIT ROSTRA OBSTACLE SENSING SYSTEM CONTENTS
REARSENTRY TM ROSTRA OBSTACLE SENSING SYSTEM BASE KIT 250-1728 CONTENTS Parts List... 2 Parts Diagrams... 2 Before You Start... 5 Installation... 7 Troubleshooting Guide...11 Form #4713, Rev. B, 01-07-04
3.5mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard)
3.mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard) MDF6 Series Inner type positive lock Features 1. Miniature type with 3.mm pitch A miniature, space-saving
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type)
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type) Double-sided two point Contact System Features 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard.
MX Cable Connector Kit Manual Manual for Trimming the Cable and Connecting the Connector to an MX8031 Extension Cable
MX8020-001 Cable Connector Kit Manual Manual for Trimming the Cable and Connecting the Connector to an MX8031 Extension Cable The Metrix MX8020-001 Cable Trimming and Connector Kit provides an easy way