Half-pitch and Multi-function Two Piece Connector
|
|
- Randolph Lyons
- 5 years ago
- Views:
Transcription
1 Half-pitch and Multi-function Two Piece Connector FX2 Series Sttacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various product line 2. Easy One-Touch Operation Stacking connection Vertical type DIP type MT type DIP type SMT type Cable connection The ribbon cable connection type allows easy one-touch operation with either single hand. Insersion and Extraction qpick internal locks with thumb and the index finger. DIP type SMT type Cable only DIP type Horizontal type SMT type Vertical type DIP type SMT type wwith unique and preferable click feeling, the cable and connector can be inserted or withdrawed. Cable only Cable connection (For insertion, the operation proceeds from procedure (2) to (1).) A142
2 3. Board to board type q Flux swell prevention The straight dip type takes the complete flux tight action from the board back side at solder dipping. The type is prepared, corresponding to whether or not cleaning is required. w Stack height 12mm~16mm The board stack height can be set to every 1 mm unit up to 12~16mm. e Mis-insertion preventive mechanism The mating area is designed in a mechanism so as to prevent mis-insertion, and complete countermeasures have been taken against wrenching. Applications Computers, peripheral equipments, various machines etc. Product Specifications Rating 4. Board to cable type q Complete lock with easy operation Employing the inner lock system, complete lock and eject actions can be performed with easy operation. w Applicable cable The applicable cable is the <UL2651>AWG#28 flat cable (7/0.127mm), and the jacket size is 0.9±0.1mm. 5. SMT type q Strength security with metaltab The right angle type is equipped with metaltab to secure soldering strength, and constructed so as to fix by screws. The straight type can choose whether or not metaltab are required. Rated Current 0.5A Operating Temperature Range -55ç~+85ç (Note 1) Storage Temperature Range -10ç~+60ç (Note 2) Rated Voltage 125A AC Operating Humidity Range 40~80% Storage Humidity Range 40 ~ 70% (Note 2) Item Specification Condition 1. Insulation Resistance 1000Mø min Measured at 250V DC 2. Withstand Voltage Neither short nor breakdown AC for 1 minute 3. Contact Resistance 45mø max. Measured at 100mA 4. Vibration Electrical discontinuity, 1µS max. 0~55Hz, single amplitude 0.75mm in 3 directions for 2 hours, respectively 5. Moisture Resistance Contact resistance: 55mø max. Insulation resistance: 100Mø min. Temperature 40±2ç, humidity 90~95%, duration 96 hours Contact resistance: 55mø max. (-55ç: 30 minutes 15~35ç: 2~3 minutes 6. Temperature Cycle Insulation resistance: 100Mø min. (-85ç: 30 minutes 15~35ç: 2~3 minutes) 5 cycles Crack, break, and loosen not found on the parts. 7. Operation Life Contact resistance: 55 mø max. 500 cycles 8. Resistance to soldering heat No resin area fusion to degrade performance SMT type Reflow: Recommended temperature profile DIP type Soldering iron temperature: 260ç for 10 seconds Note 1. Note 2. Note 3. Material Temperature rise included when energized. This storage indicates a long-term storage state for the unused product before the board mounted. The operating temperature range is applied to the non-energized state after the board mounted and the temporary storage state for transportation. The above standard represents this series. Individual formal agreement should be based on the "Specification". Parts Material Finish Remark Insulator Dip type Polyamid Black Socket PBT/Polyamid UL94V-0 SMT type PPS Light brown Contact Receptacle Phosphor bronze Socket Selective gold plating Header Phosphor bronze or brass Stacking Variation Header Dip type SMT type Receptacle FX2C-πP-1.27DSA(L) FX2CA-πP-1.27DSA(L) FX2CA1-πP-1.27DSA(L) FX2CA2-πP-1.27DSA(L) FX2-πP-1.27SV(L) FX2C-πS-1.27DSA(L) FX2CA-πS-1.27DSA(L) Dip type FX2C2-πS-1.27DSA(L) FX2CA2-πS-1.27DSA(L) Unit:mm SMT type FX2-πS-1.27SV(L) A143
3 Ordering Information Please determine the specific product. If needed, select and order the products from the product No. as listed on catalog page A151~A168. Board to Board Receptacle FX 2 CA 2 - π S DSA L q w e r t y u i o q Series Name :FX w Series No. : 2 e None : Right angle type C : Straight non-cleaning type CA : Straight cleaning type r Product height variation (DSA only) None : Standard product 2 : +2mm t Number of contacts: 20, 32, 40, 52, 60, 68, 80, 100, 120 y Connector type: S: Receptacle u Contact pitch: 1.27mm i Dip contact style DS : Right angle type DSA : Straight type o L: Board prefixed pin Board to Board Header FX 2 CA 1 - π P DSA L q w e r t y u i o q Series Name :FX w Series No. : 2 e None : Right angle type C : Straight non-cleaning type CA : Straight cleaning type r Product height variation (DSA only) None : Standard product 1 : +1mm 2 : +2mm Note 1. C and CA take complete countermeasures against flux. Note 2. Cleaning type: the liquid escape hole is added at dip cleaning. Note 3. No-cleaning type: no liquid escape hole is added at dip cleaning. t Number of contacts: 20, 32, 40, 52, 60, 68, 80, 100, 120 y Connector type: P: header u Contact pitch: 1.27mm i Dip contact style: DS : Right angle type DSA : Straight type o L: Board prefixed pin Board to Cable Socket FX 2 BA - π S A R q w e r t y u i q Series Name : FX w Series No. : 2 e B : Lock cable type BA : No lock cable type r Number of contacts: 20, 32, 40, 52, 60, 68, 80, 100 t S: Socket y A: Contact material: phosphor bronze u Contact pitch: 1.27mm i R: Insulation displacement A144
4 Board to Cable Header FX 2 BA - π P A DSA L q w e r t y u i o q Series Name : FX y None : Contact material: phosphor bronze w Series No. : 2 A : Contact material: brass e B : Lock straight no cleaning type : Lock right angle type u Contact pitch: 1.27mm i Dip Contact style: BA : Lock straight cleaning type DS : Right angle type r Number of contacts: 20, 32, 40, 52, 60, 68, 80, 100 t Connector type: P: header DSA : Straight type o L: Board prefixed pin Note 1. Cleaning type: The liquid escape hole is added at dip cleaning. Note 2. No cleaning type: No liquid escape hole is added at dip cleaning. Note 3. Straight 20 and 32 contact types use phosphor bronze for contact material. Straight SMT Type FX 2 - π P SV L q w e r t y u q Series Name :FX w Series No. : 2 e Number of contacts: 20, 32, 40, 52, 60, 68, 80, 100, 120 r Connector type: P: Header S: Receptacle t Contact pitch: 1.27mm y Contact style: SV: Straight SMT type u L: Board prefixed pin Header Right Angle SMT Type FX 2 A - π P SH q w e r t y u q Series Name :FX w Series No. : 2 e None : With boss A : Without boss r Number of contacts: 20, 40, 52, 60, 80 t Connector type: P: Header y Mounting area pitch: 0.635mm u Contact style SH: Right angle SMT type A145
5 BFX2 Functional Flow Chart FX2-πP-1.27DS (L) Right angle type Header Side Board to Board Cable Type Receptacle and Socket Side FX2-πS-1.27DS (L) Right angle type FX2(A)-πP-0.635SH Right angle type SMT type FX2C-πS-1.27DS (L) Straight type No cleaning type, flux tight FX2C-πP-1.27DSA (L) Straight type No cleaning type, flux tight FX2C-πS-1.27DS (L) Straight type Cleaning type, flux tight FX2CA-πP-1.27DSA (L) Straight type Cleaning type, flux tight FX2CA-πS-1.27DSV (L) Straight type SMT type FX2-πP-1.27DSA (L) Straight type SMT type FX2BA-πSA-1.27R No lock cable type A146
6 BFX2 Functional Flow Chart FX2B-πPA-1.27DS (L) Lock right angle type Header Side Board to Board Cable Type Receptacle and Socket Side FX2B-πPA-1.27DS(L) Lock right angle type No cleaning type, flux tight FX2BA-πSA-1.27R Lock cable type FX2B-πPA-1.27DS(L) Lock right angle type Cleaning type, flux tight A147
7 BDip Type Application Pattern Header FX2-πP-1.27DS(L) Stacking height Receptacle Header FX2CA-πS FX2CA2-πS FX2CA-πP FX2CA1-πP FX2CA2-πP Receptacle A FX2C(A) -πs 18.5 FX2C(A)2-πS 20.5 B Receptacle Receptacle FX2-πP-1.27DS(L) FX2-πS-1.27DS(L) Header A FX2C(A) -πp 18.5 FX2C(A)1-πP 19.5 FX2C(A)2-πP 20.5 B Header FX2-πP-1.27DS(L) FX2B(A)-πSA-1.27R FX2B(A)-πSA-1.27R FX2B(A)-πP(A)-1.27DSA(L) FX2B-πPA-1.27DS(L) A148
8 BSMT Type Application Pattern FX2-πP-1.27SV(L) FX2-πS-1.27SV(L) FX2-πS-1.27SV(L) FX2C(A)-πP-1.27DSA(L) FX2-πP-1.27SV(L) FX2-πS-1.27SV(L) FX2C(A)-πS-1.27-DSA(L) FX2C(A)1-πP-1.27DSA(L) FX2-πP-1.27SV(L) FX2-πS-1.27SV(L) FX2C(A)2-πS-1.27DSA(L) FX2C(A)2-πP-1.27DSA(L) FX2-πP-1.27SV(L) FX2-πS-1.27SV(L) FX2-πS-1.27DS(L) FX2-πP-1.27DS(L) A149
9 BSMT Type Application Pattern FX2(A)-πP-0.635SH FX2(A)-πP-0.635SH Receptacle A FX2C(A) FX2C(A) FX2C(A 2)-πS-1.27DSA(L) FX2-πS-1.27SV(L) FX2(A)-πP-0.635SH FX2(A)-πP-0.635SH FX2-πS-1.27DS(L) FX2BA-πSA-1.27R A150
10 Receptacle No Cleaning Type Straight Type Product No. FX2C-020S-1.27DSA FX2C-020S-1.27DSAL FX2C-032S-1.27DSA FX2C-032S-1.27DSAL FX2C-040S-1.27DSA FX2C-040S-1.27DSAL FX2C-052S-1.27DSA FX2C-052S-1.27DSAL FX2C-060S-1.27DSA FX2C-060S-1.27DSAL FX2C-068S-1.27DSA FX2C-068S-1.27DSAL FX2C-080S-1.27DSA FX2C-080S-1.27DSAL FX2C-100S-1.27DSA FX2C-100S-1.27DSAL FX2C-120S-1.27DSA FX2C-120S-1.27DSAL HRS No. CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Unit:mm Number of Contacts A B C D A151
11 Receptacle Cleaning Type Straight Type Product No. FX2CA-020S-1.27DSA FX2CA-020S-1.27DSAL FX2CA-032S-1.27DSA FX2CA-032S-1.27DSAL FX2CA-040S-1.27DSA FX2CA-040S-1.27DSAL FX2CA-052S-1.27DSA FX2CA-052S-1.27DSAL FX2CA-060S-1.27DSA FX2CA-060S-1.27DSAL FX2CA-068S-1.27DSA FX2CA-068S-1.27DSAL FX2CA-080S-1.27DSA FX2CA-080S-1.27DSAL FX2CA-100S-1.27DSA FX2CA-100S-1.27DSAL FX2CA-120S-1.27DSA FX2CA-120S-1.27DSAL HRS No. CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Unit:mm Number of Contacts A B C D A152
12 Receptacle No Cleaning Type Straight Type Product No. FX2C2-020S-1.27DSA FX2C2-020S-1.27DSAL FX2C2-032S-1.27DSA FX2C2-032S-1.27DSAL FX2C2-040S-1.27DSA FX2C2-040S-1.27DSAL FX2C2-052S-1.27DSA FX2C2-052S-1.27DSAL FX2C2-060S-1.27DSA FX2C2-060S-1.27DSAL FX2C2-068S-1.27DSA FX2C2-068S-1.27DSAL FX2C2-080S-1.27DSA FX2C2-080S-1.27DSAL FX2C2-100S-1.27DSA FX2C2-100S-1.27DSAL FX2C2-120S-1.27DSA FX2C2-120S-1.27DSAL HRS No. CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Unit:mm Number of Contacts A B C D A153
13 Receptacle Cleaning Type Straight Type Product No. FX2CA2-020S-1.27DSA FX2CA2-020S-1.27DSAL FX2CA2-032S-1.27DSA FX2CA2-032S-1.27DSAL FX2CA2-040S-1.27DSA FX2CA2-040S-1.27DSAL FX2CA2-052S-1.27DSA FX2CA2-052S-1.27DSAL FX2CA2-060S-1.27DSA FX2CA2-060S-1.27DSAL FX2CA2-068S-1.27DSA FX2CA2-068S-1.27DSAL FX2CA2-080S-1.27DSA FX2CA2-080S-1.27DSAL FX2CA2-100S-1.27DSA FX2CA2-100S-1.27DSAL FX2CA2-120S-1.27DSA FX2CA2-120S-1.27DSAL HRS No. CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Unit:mm Number of Contacts A B C D A154
14 Receptacle Right Angle Type Product No. FX2-020S-1.27DS FX2-020S-1.27DSL FX2-032S-1.27DS FX2-032S-1.27DSL FX2-040S-1.27DS FX2-040S-1.27DSL FX2-052S-1.27DS FX2-052S-1.27DSL FX2-060S-1.27DS FX2-060S-1.27DSL FX2-068S-1.27DS FX2-068S-1.27DSL FX2-080S-1.27DS FX2-080S-1.27DSL FX2-100S-1.27DS FX2-100S-1.27DSL FX2-120S-1.27DS FX2-120S-1.27DSL HRS No. CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Unit:mm Number of Contacts A B C D A155
15 Receptacle Cleaning Type Straight Type Product No. FX2-020P-1.27DS FX2-020P-1.27DSL FX2-032P-1.27DS FX2-032P-1.27DSL FX2-040P-1.27DS FX2-040P-1.27DSL FX2-052P-1.27DS FX2-052P-1.27DSL FX2-060P-1.27DS FX2-060P-1.27DSL FX2-068P-1.27DS FX2-068P-1.27DSL FX2-080P-1.27DS FX2-080P-1.27DSL FX2-100P-1.27DS FX2-100P-1.27DSL FX2-120P-1.27DS FX2-120P-1.27DSL HRS No. CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Unit:mm Number of Contacts A B C A156
16 Header No Cleaning Type Straight Type Product No. FX2C-020P-1.27DSA FX2C-020P-1.27DSAL FX2C-032P-1.27DSA FX2C-032P-1.27DSAL FX2C-040P-1.27DSA FX2C-040P-1.27DSAL FX2C-052P-1.27DSA FX2C-052P-1.27DSAL FX2C-060P-1.27DSA FX2C-060P-1.27DSAL FX2C-068P-1.27DSA FX2C-068P-1.27DSAL FX2C-080P-1.27DSA FX2C-080P-1.27DSAL FX2C-100P-1.27DSA FX2C-100P-1.27DSAL FX2C-120P-1.27DSA FX2C-120P-1.27DSAL HRS No. CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Unit:mm Number of Contacts A B C A157
17 Header Cleaning Type Straight Type Product No. FX2CA-020P-1.27DSA FX2CA-020P-1.27DSAL FX2CA-032P-1.27DSA FX2CA-032P-1.27DSAL FX2CA-040P-1.27DSA FX2CA-040P-1.27DSAL FX2CA-052P-1.27DSA FX2CA-052P-1.27DSAL FX2CA-060P-1.27DSA FX2CA-060P-1.27DSAL FX2CA-068P-1.27DSA FX2CA-068P-1.27DSAL FX2CA-080P-1.27DSA FX2CA-080P-1.27DSAL FX2CA-100P-1.27DSA FX2CA-100P-1.27DSAL FX2CA-120P-1.27DSA FX2CA-120P-1.27DSAL HRS No. CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Unit:mm Number of Contacts A B C A158
18 Header No Cleaning Type Straight Type Unit: mm Product No. HRS No. Number of Contacts A B C FX2C1-020P-1.27DSA CL FX2C1-020P-1.27DSAL CL FX2C1-032P-1.27DSA CL FX2C1-0Z32P-1.27DSAL CL FX2C1-040P-1.27DSA CL FX2C1-040P-1.27DSAL CL FX2C1-052P-1.27DSA CL FX2C1-052P-1.27DSAL CL FX2C1-060P-1.27DSA CL FX2C1-060P-1.27DSAL CL FX2C1-068P-1.27DSA CL FX2C1-068P-1.27DSAL CL FX2C1-080P-1.27DSA CL FX2C1-080P-1.27DSAL CL FX2C1-100P-1.27DSA CL FX2C1-100P-1.27DSAL CL FX2C1-120P-1.27DSA CL FX2C1-120P-1.27DSAL CL A159
19 Header Cleaning Type Straight Type Unit: mm Product No. HRS No. Number of Contacts A B C FX2CA1-020P-1.27DSA CL FX2CA1-020P-1.27DSAL CL FX2CA1-032P-1.27DSA CL FX2CA1-032P-1.27DSAL CL FX2CA1-040P-1.27DSA CL FX2CA1-040P-1.27DSAL CL FX2CA1-052P-1.27DSA CL FX2CA1-052P-1.27DSAL CL FX2CA1-060P-1.27DSA CL FX2CA1-060P-1.27DSAL CL FX2CA1-068P-1.27DSA CL FX2CA1-068P-1.27DSAL CL FX2CA1-080P-1.27DSA CL FX2CA1-080P-1.27DSAL CL FX2CA1-100P-1.27DSA CL FX2CA1-100P-1.27DSAL CL FX2CA1-120P-1.27DSA CL FX2CA1-120P-1.27DSAL CL A160
20 Header No Cleaning Type Straight Type Unit: mm Product No. HRS No. Number of Contacts A B C FX2C2-020P-1.27DSA CL FX2C2-020P-1.27DSAL CL FX2C2-032P-1.27DSA CL FX2C2-032P-1.27DSAL CL FX2C2-040P-1.27DSA CL FX2C2-040P-1.27DSAL CL FX2C2-052P-1.27DSA CL FX2C2-052P-1.27DSAL CL FX2C2-060P-1.27DSA CL FX2C2-060P-1.27DSAL CL FX2C2-068P-1.27DSA CL FX2C2-068P-1.27DSAL CL FX2C2-080P-1.27DSA CL FX2C2-080P-1.27DSAL CL FX2C2-100P-1.27DSA CL FX2C2-100P-1.27DSAL CL FX2C2-120P-1.27DSA CL FX2C2-120P-1.27DSAL CL A161
21 Header Cleaning Type Straight Type Unit: mm Product No. HRS No. Number of Contacts A B C FX2CA2-020P-1.27DSA CL FX2CA2-020P-1.27DSAL CL FX2CA2-032P-1.27DSA CL FX2CA2-032P-1.27DSAL CL FX2CA2-040P-1.27DSA CL FX2CA2-040P-1.27DSAL CL FX2CA2-052P-1.27DSA CL FX2CA2-052P-1.27DSAL CL FX2CA2-060P-1.27DSA CL FX2CA2-060P-1.27DSAL CL FX2CA2-068P-1.27DSA CL FX2CA2-068P-1.27DSAL CL FX2CA2-080P-1.27DSA CL FX2CA2-080P-1.27DSAL CL FX2CA2-100P-1.27DSA CL FX2CA2-100P-1.27DSAL CL FX2CA2-120P-1.27DSA CL FX2CA2-120P-1.27DSAL CL A162
22 Receptacle SMT Type Straight Type Note: The 120 contacts type differs in the style. Unit: mm Product No. HRS No. Number of Contacts A B C D E F FX2-020S-1.27SV CL FX2-020S-1.27SVL CL FX2-032S-1.27SV CL FX2-032S-1.27SVL CL FX2-040S-1.27SV CL FX2-040S-1.27SVL CL FX2-052S-1.27SV CL FX2-052S-1.27SVL CL FX2-060S-1.27SV CL FX2-060S-1.27SVL CL FX2-068S-1.27SV CL FX2-068S-1.27SVL CL FX2-080S-1.27SV CL FX2-080S-1.27SVL CL FX2-100S-1.27SV CL FX2-100S-1.27SVL CL FX2-120S-1.27SV CL FX2-120S-1.27SVL CL A163
23 Header SMT Type Straight Type Unit: mm Product No. HRS No. Number of Contacts A B C D E FX2-020P-1.27SV CL FX2-020P-1.27SVL CL FX2-032P-1.27SV CL FX2-032P-1.27SVL CL FX2-040P-1.27SV CL FX2-040P-1.27SVL CL FX2-052P-1.27SV CL FX2-052P-1.27SVL CL FX2-060P-1.27SV CL FX2-060P-1.27SVL CL FX2-068P-1.27SV CL FX2-068P-1.27SVL CL FX2-080P-1.27SV CL FX2-080P-1.27SVL CL FX2-100P-1.27SV CL FX2-100P-1.27SVL CL FX2-120P-1.27SV CL FX2-120P-1.27SVL CL A164
24 Header SMT Type Right Angle Type BMounting Example (Reference) Since bosses are located symmetrically on the right and left sides, connectors can be mounted on both sides of board as shown above. BRecommended Land Pattern (Connector Mounting Surface Side) Note: The FX2A type does not have bosses as shown in the illustration. BRecommended Screw Clamp Use M2 screw for fixture. Recommended torque is 0.15(N m). Unit: mm Product No. HRS No. Number of Contacts A B C D E F G FX2-20P-0.635SH CL FX2A-20P-0.635SH CL FX2-40P-0.635SH CL FX2A-40P-0.635SH CL FX2-52P-0.635SH CL FX2A-52P-0.635SH CL FX2-60P-0.635SH CL FX2A-60P-0.635SH CL FX2-80P-0.635SH CL FX2A-80P-0.635SH CL A165
25 Socket Type Lock Cable Type Combination View Unit: mm Product No. HRS No. Number of Contacts A FX2B-020SA-1.27R CL FX2B-032SA-1.27R CL FX2B-040SA-1.27R CL FX2B-052SA-1.27R CL FX2B-060SA-1.27R CL FX2B-068SA-1.27R CL FX2B-080SA-1.27R CL FX2B-100SA-1.27R CL Unlock Cable Type BConnection Tool Combination View Unit: mm Product No. HRS No. Number of Contacts A FX2BA-020SA-1.27R CL FX2BA-032SA-1.27R CL FX2BA-040SA-1.27R CL FX2BA-052SA-1.27R CL FX2BA-060SA-1.27R CL FX2BA-068SA-1.27R CL FX2BA-080SA-1.27R CL FX2BA-100SA-1.27R CL Type Product No. HRS No. Guide plate FX2B(A)-GPA CL Connection press Hi-Flex connection press CL Note:HRS6 cable cutter FC601 isn't required for FX2B(A) connection. (Connected without convex-concave cutting.) A166
26 Header Right Angle Type for Lock Unit: mm Product No. HRS No. Number of Contacts A B C FX2B-020PA-1.27DS CL FX2B-020PA-1.27DSL CL FX2B-032PA-1.27DS CL FX2B-032PA-1.27DSL CL FX2B-040PA-1.27DS CL FX2B-040PA-1.27DSL CL FX2B-052PA-1.27DS CL FX2B-052PA-1.27DSL CL FX2B-060PA-1.27DS CL FX2B-060PA-1.27DSL CL FX2B-068PA-1.27DS CL FX2B-068PA-1.27DSL CL FX2B-080PA-1.27DS CL FX2B-080PA-1.27DSL CL FX2B-100PA-1.27DS CL FX2B-100PA-1.27DSL CL A167
27 Header Non-cleaning Type Straight Type for Lock Unit: mm Product No. HRS No. Number of Contacts A B C FX2B-020PA-1.27DSA CL FX2B-020PA-1.27DSAL CL FX2B-032PA-1.27DSA CL FX2B-032PA-1.27DSAL CL FX2B-040PA-1.27DSA CL FX2B-040PA-1.27DSAL CL FX2B-052PA-1.27DSA CL FX2B-052PA-1.27DSAL CL FX2B-060PA-1.27DSA CL FX2B-060PA-1.27DSAL CL FX2B-068PA-1.27DSA CL FX2B-068PA-1.27DSAL CL FX2B-080PA-1.27DSA CL FX2B-080PA-1.27DSAL CL FX2B-100PA-1.27DSA CL FX2B-100PA-1.27DSAL CL A168
28 Header Non-cleaning Type Straight Type for Lock Unit: mm Product No. HRS No. Number of Contacts A B C FX2BA-020PA-1.27DSA CL FX2BA-020PA-1.27DSAL CL FX2BA-032PA-1.27DSA CL FX2BA-032PA-1.27DSAL CL FX2BA-040PA-1.27DSA CL FX2BA-040PA-1.27DSAL CL FX2BA-052PA-1.27DSA CL FX2BA-052PA-1.27DSAL CL FX2BA-060PA-1.27DSA CL FX2BA-060PA-1.27DSAL CL FX2BA-068PA-1.27DSA CL FX2BA-068PA-1.27DSAL CL FX2BA-080PA-1.27DSA CL FX2BA-080PA-1.27DSAL CL FX2BA-100PA-1.27DSA CL FX2BA-100PA-1.27DSAL CL A169
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
More information0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
More information0.5mm Pitch SMT Board-to-Board Connector
0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of
More information0.5mm Pitch SMT Board to Board Connector
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationPCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type)
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type) Double-sided two point Contact System Features 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard.
More information2mm Pitch Miniature Connector for HDD
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2.54mm Pitch Card Edge Connector
2.54mm Pitch Card Edge Connector CR22 Series Product Standards Rating Current rating: 3A Voltage rating: 0VAC Operating Temperature Range: - to +85ç (Note 1) Operating Humidity Range: 40 to % Storage Temperature
More informationCF Card Connectors. Complies with Compact Flash Association. MI20/21 Series. Features. Applications
CF Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth for miniaturization
More informationProduct Compliant to DIN41612/IEC603-2 Standard
Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
More information0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
More information1.25mm Pitch Super Low profile Crimping Connector
1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
More information0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
More informationSmall-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
More information0.4 mm Contact Pitch, Board-to-FPC Connectors
0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure Two-point contact system Features 1. Two stacking height options Two separate heights
More informationCompact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth
More informationCompact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI20/21 Series (a)space-saving design 7.0 51.75 Features 1. Compact design occupies minimum space Connectors are designed with small
More informationI/O Card Interface Connectors
I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal
More information1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
More information0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
More information0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
.4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More informationHigh speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together
More information3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
More informationMiniature Waterproof Plastic Connectors
NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. Ease of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock)
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
More information2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
More information1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB
More informationNew Connectors For Low Profile Power Supply
NEW New Connectors For Low Profile Power Supply RP34L Series Receptacle installed height RP34L Existing RP34 (3-contact type) (2-contact type) Fig.-➀ Features 1. Low profile: These receptacles are designed
More information0.5mm and 1mm Pitch FPC/FFC Connectors
0.5mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear
More informationPower Supply Connectors For Industrial Equipment
ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationHigh speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together
More information0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors
.5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached
More information0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged
More informationPower Supply Connectors For Industrial Equipment
Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (0/
More information0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features
More information3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
More information2mm pitch, high reliability with lock, board to cable and cable to cable connector
NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet
More information0.5 mm and 1 mm Pitch FPC/FFC Connectors
0.5 mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear
More informationSubminiature Coaxial Switch 1.6 mm High, DC to 6 GHz
NEW Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156NB Series Overview Developed for inspection of high frequency circuits used in portable terminals.verification of the circuit performance is
More informationUltra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More information-Original Multi-purpose High-pin-count Miniature Waterproof Connectors
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors RM-W Series ssembly type (straight plug/rm5w) 5 Ø.5 Ø.5 Mar..0 Copyright 0 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø Overview
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
rawing for the most current and accurate design information. 0.5mm and mm Pitch onnectors For FP/FF FH Series Flip-lock Features. ase of Use and Space Savings Only one finger or.9n (Newtons) of force is
More informationLow Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
More information0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector FH63 Series Single action lock (Dimension diagram : 30pos.) 2.8mm 21.94mm Features 1. Automatic single
More information0.5 mm and 1 mm Pitch FPC/FFC Connectors
0.5 mm and mm Pitch FP/FF onnectors FH Series pr..0 opyright 0 HIROS LTRI O., LT. ll Rights Reserved. Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate
More informationCircular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
More information0.5 mm Pitch, Board to Board Connector with Floating Structure
0.5 mm Pitch, Board to Board Connector with Floating Structure FX20 Series X direction Floating range :0.6 0.8mm Y direction Floating range :0.6mm Features 1. 0.5 mm pitch 2. Connection type: Right angle
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationDC to 6GHz Ultra-Small Coaxial Switch
DC to 6Hz Ultra-Small Coaxial Switch MS-147 Series Outline The ultra-small MS-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (substrates)
More informationConnections of the Various Units and Device Interiors. GT8 Series. High-Pressure Connectors <GT8, GT8A, GT8Z and GT8E>
GT 16 GT 13 GT 5 PO5G GT 11 GT8 Series High-Pressure Connectors GT 22 GT 25 GT 9 GT 8 GT 15 GT 18W GT 10 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 Features Crimp
More informationHigh Current, Plastic Power Supply Connectors
High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)
More information0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors
0.4 mm Pitch, 0.6 and mm Height, Board-to-Board and Board-to-FPC Connectors BM20 Series BM20 2.3mm Existing products 2.98mm Receptacle A 22.3% reduction in size! 2.98 0.4 =About 3.0mm2 Header BM20 2.3
More informationPRODUCT SPECIFICATION
1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE
More informationWaterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16
More informationCF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
More informationWaterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Features 1. Waterproof The JR-W series is a rugged, waterproof connector series that is IP67 and IP68 rated in the mated condition. IP67: Left in water at a depth
More information0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors
0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors BM20 Series Receptacle Existing products BM20 2.3mm 2.98mm 10.4mm 10.48mm Existing products A 22.3% reduction in size! BM20
More informationMulti-Pole Rectangular Connectors Specifications Table
Multi-Pole Rectangular Connectors Specifications Table Multi-Pole Rectangular Connectors Specifications Table Number of Poles Rating Insulation Resistance Dielectric Strength Contact Resistance Insertion
More informationSFI Electronics Technology
1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V
More informationS J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
More information0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors
0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors DF36 Series High contact reliability Effective mating length of 0.4 mm 1.5±0. (Mated height) (0.4) (Effective mating length) Enhanced
More informationPRODUCT SPECIFICATION
1. SCOPE This specification covers the T-FLASH MEMORYCARD SOCKET series. 2. PRODUCT NAME AND PART NUMBER Product Name Part Number Assembly 49225-811 Embossed Package 49225-811 3. RATINGS Item Standard
More informationHigh Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board mounting
More informationHigh Current, High Density, Power Connectors
High Current, High Density, Power Connectors MCN1 Series Features 1. High Current Applications Board-to-board connectors are UL certified for 27 A per contact. 2. Hirose's Unique Compliant Press-fit connection
More information125A High-Current Waterproof Connectors
125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure
More informationSMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
More informationSMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
More informationPRODUCT SPECIFICATION
MICRO-FIT BMI FLOATING CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) connector system terminated with 20 to 30 AWG wire using crimp technology
More informationM40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
More informationSPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.)
SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS - 87151-XXX9 REVISION: D PRODUCT NAME:
More informationGT11 Series. Connectors for shielded cables. Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT 22 GT 25 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 PO5G GT 16 GT 10 GT 18W GT 9 GT 8 GT 15 GT 13 GT 5 GT11 Series Connectors for shielded cables Features A housing lance systems has been used to
More informationPicoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More informationBH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
More informationM8 Series. Key features: BUCCANEER
Bulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory automation
More informationContent (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
More information3.5mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard)
3.mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard) MDF6 Series Inner type positive lock Features 1. Miniature type with 3.mm pitch A miniature, space-saving
More informationPRODUCT SPECIFICATION
PROUCT SPECIFICATION TABLE OF CONTENTS 1.0 SCOPE 2.0 PROUCT ESCRIPTION 3.0 APPLICABLE OCUMENTS AN SPECIFICATIONS 4.0 RATINGS 5.0 PERFORMANCE 5.1 ELECTRICAL PERFORMANCE 5.2 MECHANICAL PERFORMANCE 5.3 ENVIRONMENTAL
More informationProduct Specification AMP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version
Product Specification 108-60026 MP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version 1. 1.1 Scope: Contents: This specification covers the requirements for product performance, test methods and
More informationFAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm
mm pitch FZ ONNETOR onnectors for FF Emboss Tape Features Zero insertion force mechanism (ZIF) ZIF mechanism improves wear resistance and extends the mating life of the connector. y moving the slider into
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
More informationSPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-22505105 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 7/6/07**
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-13501505 RoHS ISSUED CHECKED CHECKED CHECKED APPROVED 12/14/09 kn 10/25/12 DS 11/15/12
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-10000064 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 1/31/11 DS
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF RoHS ISSUED CHECKED CHECKED CHECKED APPROVED.
Page 1 of 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF-22500024 RoHS 12/7/09 Added Attenuation and graph 9/1/17 Added Recommended Solder Pattern ISSUED CHECKED CHECKED
More informationUltra Low-profile Interface Connectors with 2.0 mm Mounting Height
Ultra Low-profile Interface Connectors with.0 mm Mounting Height LX Series Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Low profile on the PCB When mounted on the
More informationUltra-small, power/signal contact design for Board-to-Board/FPC-to-Board providing 3A max current
NEW Ultra-small, power/signal contact design for Board-to-Board/FPC-to-Board providing 3A max current BM29 Series 20% reduction in size compared with alternate Hirose s products 3.16mm BM29 6 contacts
More informationPressure sensor with built-in amplification and temperature compensation circuit
sensor with built-in amplification and temperature compensation circuit PS-A PRESSURE SENSOR (built-in amplification and temperature compensating circuit) NEW FEATURES 1. Contains built-in amplification
More information0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors
0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors FH19C Series/FH19SC Series FH19C FPC/FFC thickness: 0.2±0.0mm Actuator color: Brown Features 1. Low-profile 0.5mm pitch FPC/FFC Connectors Miniaturization
More informationPRODUCT SPECIFICATION
MultiCat TM In-line Power Connector System WIRE-TO-WIRE AND WIRE-TO-BOARD MALE CRIMP CONTACT (201845-00X0) FEMALE CRIMP CONTACT (201846-00X0) PLUG HOUSING (201840-00XX) RECEPTACLE HOUSING (201841-00XX)
More information