Product Compliant to DIN41612/IEC603-2 Standard
|
|
|
- Abraham Gallagher
- 5 years ago
- Views:
Transcription
1 Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type (mounted on the board edge) PCN10EA-* *P-2.54DS PCN12EA-* *P-2.54DS PCN12EA-* *P-2.54DS Right angle through hole type (mounted on the board) PCN10AE-* *P-2.54DS PCN10EA-* *P-2.54DS PCN12AE-* *P-2.54DS PCN12EA-* *P-2.54DS Press fit type PCN11-* *P-2.54W* -2+PCN11-* *P-2.54H-2 Straight through hole Wrapping type Receptacle Side PCN10EA-* *S-2.54DSA PCN10CA-* *S-2.54DSA PCN10EA-* *S-2.54DSA PCN10DA-* *S-2.54DSA PCN12EA-* *S-2.54DSA PCN12EA-* *S-2.54DSA PCN13EA-* *S-2.54DSA PCN10EA-* *S-2.54W* Right angle through hole type (mounted on the board edge) PCN10BA-* *S-2.54DS Right angle through hole type (mounted on the board) PCN10AE-* *S-2.54DS PCN10CA-* *S-2.54DS PCN13EA-* *S-2.54DS Press fit short pin type PCN11-* *S-2.54PFB-2 Press fit long pin type PCN11-* *S-2.54WB-2 Cable type PCN10-* *S-2.54C+PCN10-* * * *SC* PCN10-* *S-2.54R A12
2 Coaxial Connector and High Current Contact Composite Type Pin Header Side Receptacle Side Right angle through hole type (mounted on the board edge) Straight through hole type PCN10F-* *P-2.54DS PCN10FA-* *S-2.54DSA Wrapping type Right angle through hole type (mounted on the board) PCN10FA-* *S-2.54W* PCN10FA-* *P-2.54DS Right angle through hole type (mounted on the board edge) PCN10FB-* *S-2.54DS Right angle through hole type (mounted on the board) PCN10FA-* *S-2.54DS Press fit short pin type PCN11F-* *S-2.54PFB-2 Press fit long pin type PCN11F-* *S-2.54WB-2 Circuit Protection Function Type Pin Header Side Receptacle Side Right angle through hole type PCN10MC*-* *P-2.54DS Straight through hole type PCN10MC*-* *S-2.54DSA Wrapping type PCN10MC*-* *S-2.54W* A13
3 PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type) Features 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard. PCN Series 2. Variation in number of contacts 10, 16, 20, 24, 28, 30, 32, 44, 48, 50, 64, 90, 96, 100, 128, and 144 contacts are available. 3. Two point contact construction PCN10 and 12 series are constructed with high reliable doublesided two point contacts. PCN13 series pursues after cost performance, and constructed with single sided two point contacts. 4. Broad applications DIN standard types of B, C, R, and Q are available. The flux tight product is available. The easy lock pin type to prefix the board is available. 5. Stacking height variation PCN10H series contains 25, 30, 35, 40 and 45mm stacking height. 6. Circuit protection function available PCN10MC series utilizes a sequence structure for circuit protection function. Double-sided two point Contact System Single-sided two point Contact System Stacking Connector 7. Cable connector ID connector for ribbon cable is available. The connector is prepared for crimping connection for AWC#26 to 30 cables. Application Control equipment, exchange, measuring instruments etc. A14
4 Product Specifications Material Contact Rating Item Specification Condition 1.Insulation Resistance 2.Withstanding Voltage 3.Contact Resistance 4.Vibration 5.Humidity(Steady state) 10 6 M ohms No flashover or insulation breakdown. 20m ohms max. No electrical discontinuity of 10μs or more Insulation resistance : 10 6 M ohms min. 100V DC 1000V AC (insulation displacement, crimping type: 650V AC) /1 minute. 0.1A Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% 6.Temperature Cycle 7.Durability (Mating/un-mating) Contact resistance : 20m ohms max. 500 cycles 8.Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Parts Material Finish Remarks Insulator Pin header Receptacle Current rating: 2A Voltage rating: 300V AC Ordering Information PCN 10 Series 1 2 No damage, cracks, or parts looseness. Series Name : PCN10 Blank A mold type (as listed below) } B C : Flux prevention type (DSA only) D : Rack installation type EA : With Board prefixed lock pin H : Stacking height 35mm type HA : Stacking height 30mm type HB : Stacking height 25mm type HC : Stacking height 45mm type HD : Stacking height 40mm type MC : Circuit Protection function type Operating Temperature Range: -55 to +85ç (Note 1) Operating Humidity Range: 85% max PBT Brass Copper alloy (-65ç : 30 minutes 15 to 35ç: 5 minutes max. 125ç : 30 minutes 15 to 35ç: 5 minutes max.) 5 cycles Gray Contact area: Gold plated Remainer: Tin plated PCN10 A * P 2.54 DS Storage Temperature Range: -10 to +60ç (Note 2) Storage Humidity Range: 40 to 70% (Note 2) UL94V Number of contacts: 2-row : 16, 20, 24, 32, 44, 50, 64, 90, row : 48, 96, row : 128 Connector type : P : Pin header : S : Receptacle Contact pitch : 2.54mm Contact type DS : Right angle through hole type DSA : Straight through hole type WA : Wrapping type (0.5tx0.7W) WB : Wrapping type (0.5tx0.5W) R : Insulation displacement type C : Crimping type * * A15
5 PCN 12 Series (Plug) q Series name w No symbol A E-EA PCN12 PCN 12E-*S-2.54 DSA(Socket) q Series name w No symbol E : PCN12 PCN12 : Standard type A - * P DS E - * S DSA : With board prefixed lock pin type e Number of contacts : 2-row: 10, 16, 20, 28, 32, 44, 50, 64, 90, row: 96 PCN 13E-*S-2.54 DSA (Socket) : PCN12 : DIN standard type C (96 Contacts) : Original type : With board prefixed lock pin type PCN13 *PCN13 series are only socket type. PCN10 and 12 series are mating connectors. e Number of contacts : 2-row: 10, 16, 20, 24, 28, 32, 44, 50, 64, 90, row: 96 r P : Plug t Contact pitch : 2.54mm y Contact type : DS: Right angle through hole type r S : Socket t Contact pitch y Contact type : 2.54mm E - * S DSA : DSA: Straight through hole type q Series name : PCN13 r S : Socket w No symbol : Standard type t Contact pitch : 2.54mm E : With board prefixed easy pin type y Contact style : DS: Right angle through hole type e Number of contacts : 2-row: 10, 16, 20, 30, 32, 44, 50, : DSA: Straight through hole type 64, 90, row: 48, 96 A16
6 BDIN Connector Mating Condition DIN connectors of Hirose should be used under conditions as illustrated below. A17
7 BContact numbers According to the inter-combination with DIN standard type C (type B) and type R (type Q), the contact numbers and row numbers represent contact No. (No.1 to 32) and row No. (a, b, c). DIN standard type C and type R represent the 3-row 96 contacts type, including 32 contacts in single-row. DIN standard type B and type Q represent the 2-row 64 contacts type, including 32 contacts in single-row. 1 Receptacle straight type 2 Pin header right angle type Type C (Type B) Type C (Type B) 3 Pin header straight type 4 Receptacle right angle type Type R (Type Q) Type R (Type Q) Note: The DIN connector is basically standardized in combination with straight and right angle types. As shown above in illustrationss; The contact numbers is matched in combination with (1)-(2) and (3)-(4), while the contact numbers are inverted in combination with (1)-(2) and (3)-(4). A18
8 PCN10 Series Pin Header: 2-row Right Angle Type (DIN standard type B) PCN10-*P-2.54DS(72) Pin Header: 2-row Right Angle Type Part Number CL No. Number of Contacts A B C D RoHS PCN10-16P-2.54DS(72) PCN10-20P-2.54DS(72) PCN10-32P-2.54DS(72) CL CL CL PCN10-44P-2.54DS(72) CL PCN10-50P-2.54DS(72) CL YES PCN10-64P-2.54DS(72) CL PCN10-90P-2.54DS(72) PCN10-100P-2.54DS(72) CL CL PCN10A-*P-2.54DS(72) Part Number CL No. Number of Contacts A B C D RoHS PCN10A-116P-2.54DS(72) CL PCN10A-120P-2.54DS(72) CL PCN10A-132P-2.54DS(72) CL PCN10A-144P-2.54DS(72) CL PCN10A-150P-2.54DS(72) CL YES PCN10A-164P-2.54DS(72) CL PCN10A-190P-2.54DS(72) CL PCN10A-100P-2.54DS(72) CL A19
9 Pin Header: 2-row Right Angle Type With Board prefixed lock pin PCN10EA*P-2.54DS(72) The PCB mounting pattern is equivalent to PCN10A-*P-2.54DS. (Refer to page A19.) Pin Header: 2-row Straight Type Part Number CL No. Number of Contacts A B C D RoHS PCN10EA-116P-2.54DS(72) CL PCN10EA-120P-2.54DS(72) CL PCN10EA-132P-2.54DS(72) CL PCN10EA-144P-2.54DS(72) CL PCN10EA-150P-2.54DS(72) CL YES PCN10EA-164P-2.54DS(72) CL PCN10EA-190P-2.54DS(72) CL PCN10EA-100P-2.54DS(72) CL PCN10-*P-2.54DSA(72) *Type Q differs in the outer dimensions and PCB mounting pattern. Part Number PCN10-120P-2.54DSA(72) PCN10-132P-2.54DSA(72) PCN10-144P-2.54DSA(72) PCN10-150P-2.54DSA(72) PCN10-164P-2.54DSA(72) PCN10-190P-2.54DSA(72) PCN10-100P-2.54DSA(72) CL No. Number of Contacts A B C D RoHS CL CL CL CL CL CL CL YES A20
10 Receptacle: 2-row Right Angle Type *Type Q differs in the external size and PCB mounting pattern. PCN10C-*S-2.54DS(72) Part Number CL No. Number of Contacts A B C D RoHS PCN10C-120S-2.54DS(72) PCN10C-132S-2.54DS(72) PCN10C-144S-2.54DS(72) CL CL CL PCN10C-150S-2.54DS(72) CL PCN10C-160S-2.54DS(72) CL YES Note PCN10C-164S-2.54DS(72) CL PCN10C-190S-2.54DS(72) PCN10C-100S-2.54DS(72) CL CL Note: DIN standard type Q (Reverse type of type B) indicates PCN10B-64S-2.54DS(72). Receptacle: 2-row Straight Type (DIN standard type B) PCN10-*S-2.54DSA(72) Part Number CL No. Number of Contacts A B C D RoHS PCN10-32S-2.54DSA(72) CL PCN10-50S-2.54DSA(72) CL YES PCN10-64S-2.54DSA(72) CL A21
11 Receptacle: 2-row Wrapping Type (DIN standard type B) PCN10-*S-2.54 WA(72) WB(72) * Part Number CL No. PCN10-32S-2.54WA(72) CL PCN10-32S-2.54WB(72) CL PCN10-50S-2.54WA(72) CL PCN10-50S-2.54WB(72) CL PCN10-64S-2.54WA(72) CL PCN10-64S-2.54WB(72) CL Flux Prevention Type (DIN standard type B) Number of Contacts A B C D RoHS YES PCN10C-*S-2.54DSA(72) Part Number PCN10C-116S-2.54DSA(72) PCN10C-120S-2.54DSA(72) PCN10C-132S-2.54DSA(72) PCN10C-144S-2.54DSA(72) PCN10C-150S-2.54DSA(72) PCN10C-164S-2.54DSA(72) PCN10C-190S-2.54DSA(72) PCN10C-100S-2.54DSA(72) CL No. Number of Contacts A B C D RoHS CL CL CL CL CL CL CL CL YES A22
12 Board Prefixed Lock Pin Type (DIN standard type B) Flux prevention type PCN10EA*S-2.54DSA(72) The PCB mounting pattern is equivalent to PCN10-*P-2.54DSA and PCN10C-*P-2.54DSA. (Refer to catalog page A21 and A22.) Part Number PCN10EA-120S-2.54DSA(72) PCN10EA-132S-2.54DSA(72) PCN10EA-144S-2.54DSA(72) PCN10EA-150S-2.54DSA(72) PCN10EA-164S-2.54DSA(72) PCN10EA-190S-2.54DSA(72) PCN10EA-100S-2.54DSA(72) Receptacle: 2-row Straight Type (Rack installation type) CL No. Number of Contacts A B C D RoHS CL CL CL CL YES CL CL CL PCN10D*S-2.54DSA(72) Part Number CL No. Number of Contacts A B C D RoHS PCN10D-50S-2.54DSA(72) CL PCN10D-64S-2.54DSA(72) CL YES PCN10D-90S-2.54DSA(72) CL A23
13 Pin Header: 3-row Right Angle Type (DIN standard type C) PCN10-*P-2.54DS(72) Pin Header: 3-row Right Angle Type The 48 contact type contains guide key grooves at 8 points. Part Number CL No. Number of Contacts A B C D E RoHS PCN10-48P-2.54DS(72) CL PCN10-96P-2.54DS(72) CL YES PCN10A-*P-2.54DS(72) The 48 contact type contains guide key grooves at 8 points. Part Number CL No. Number of Contacts A B C D E RoHS PCN10A-48P-2.54DS(72) CL PCN10A-96P-2.54DS(72) CL YES A24
14 Pin Header: Right Angle Type PCN10-64ACP-2.54DS(72) CL Pin Header: Right Angle Type PCN10A-64ACP-2.54DS(72) CL A25
15 Pin Header: 3-row Straight Type (DIN standard type R) PCN10-96P-2.54DSA(72) CL Pin Header: 3-row Straight Type PCN10-48P-2.54DSA(72) CL A26
16 Receptacle: 3-row Right Angle Type PCN10A-96S-2.54DS(72) CL Receptacle: 3-row Right Angle Type(DIN standard type R) PCN10B-96S-2.54DS(72) CL A27
17 Receptacle: 3-row Straight Type(DIN standard type C) PCN10*S-2.54DSA(72) The 48 contact type contains guide key grooves at 8 points. Part Number CL No. Number of Contacts A B PCN10-48S-2.54DSA(72) CL PCN10-96S-2.54DSA(72) CL * PCN10-96S-2.54WA(72) CL PCN10-96S-2.54WB(72) CL C D RoHS YES A28
18 Receptacle: 3-row Straight Type(DIN standard type C) With Board prefixed lock pin PCN10EA*S-2.54DSA(72) Note: The PCB mounting pattern is equivalent to PCN10-*S-2.54DSA(72). (Refer to catalog page A21.) Receptacle: Straight Type PCN10-64ACS-2.54DSA(72) CL Part Number CL No. Number of Contacts A PCN10EA-48S-2.54DSA(72) CL Note PCN10EA-96S-2.54DSA(72) CL Note: Flux prevention type B C D RoHS YES A29
19 Pin Header: 3-row Right Angle Type With Board prefixed lock pin PCN10MA-144P-2.54DS(72) CL Receptacle: 3-row Straight Type Board prefixed lock pin attached PCN10MA-144S-2.54DSA(72) CL Sequential contacts are located at 27 points up to contact No.30~38 in both rows b and c. A30
20 Pin Header: 4-row Right Angle Type PCN10-128P-2.54DS(72) CL Pin Header: 4-row Right Angle Type PCN10A-128P-2.54DS(72) CL A31
21 Pin Header: 4-row Straight Type PCN10-128P-2.54DSA(72) CL Receptacle: 4-row Straight Type PCN10-128S-2.54DSA(72) * Part Number PCN10-128S-2.54DSA(72) PCN10-128S-2.54WA(72) PCN10-128S-2.54WB(72) CL No. Number of Contacts CL CL CL RoHS YES A32
22 Receptacle: 4-row Right Angle Type PCN10B-128S-2.54DS(72) CL A33
23 Polarizing Key Part Number CL No. Material RoHS PCN10-GK(A) PBT, black YES Note: Using the polarizing key prevents connector mis-insertion in the board. Insert the polarizing key in both connectors on the receptacle side and header side. Insert the polarizing key so as to hit the mold bottom. A34
24 Ribbon Cable Connector Compliant with DIN Standard Cable Insulation displacement Connector PCN10-64S-2.54R(52) CL Insulation displacement Tool Guide plate for insulation displacement + pressing block Hi-Flex connection press PCN10-GPB64 CL Part Number CL No. Height Width Depth Weight Hi-Flex connection press HHP mm 160mm 350mm 13kg A35
25 Crimping Connector Compliant with DIN Standard 3-row Type PCN10-96S-2.54C CL row Type Current rated Voltage rated ( ) ID type 1A 2A Crimping type AWG#26 2A AWG# V AC (Crimping type 200V AC) 1A PCN10-*S-2.54C Part Number CL No. Number of Contacts A B C D RoHS PCN10-20S-2.54C PCN10-64S-2.54C CL CL YES A36
26 Manual Crimping Tool Crimping Contact PCN SC (Full Gold plated) CL () PCN SC (Selective Gold plated) CL () Applicable Cable PCN SC: AWG#26 to #30 100pcs per bag PCN SC: AWG#22 to #26 100pcs per bag Automatic Crimping Tool Crimping tool PCN10-TA2630HC (PCN SC) CL PCN10-TA2226HC (PCN SC) CL Item Part Number CL No. Applicable Contact Crimping tool unit CM Applicator AP105-PCN S PCN SCF AP105-PCN S PCN SCF Contact Extraction Tool Part Number PCN10-PO CL No A37
27 Circuit Protection Function Type Pin Header: 3-row Right Angle Type PCN10MC-96P-2.54DS(72) CL Receptacle: 3-row Straight Type PCN10MC-96S-2.54DSA(72) CL A38
28 Receptacle: 3-row Wrapping Type PCN10MC-96S-2.54WB(72) CL Pin Header: 2-row Right Angle Type PCN10MC-*P-2.54DS(72) Part Number CL No. Number of Contacts A B C D RoHS PCN10MC-064P-2.54DS(72) CL PCN10MC-100P-2.54DS(72) CL YES A39
29 Receptacle: 2-row Straight Type PCN10MC-*S-2.54DSA(72) (64 contacts): The sequential contacts are located at 27 points of 1 to 4 and 26 to 32 in both rows a and b. (100 contacts): The sequential contacts are located at 22 points of 1 to 4 and 44 to 50 in both rows a and b. Part Number CL No. Number of Contacts A B C D RoHS PCN10MC-064S-2.54DSA(72) CL PCN10MC-100S-2.54DSA(72) CL YES A40
30 Stacking Connector Stacking Plug BApplication Pattern Part Number CL No. Number of Contacts A B C D E F G PCN10H- 16P-2.54DSA(72) PCN10H- 20P-2.54DSA(72) CL CL PCN10H- 24P-2.54DSA(72) CL PCN10H- 32P-2.54DSA(72) CL PCN10H- 44P-2.54DSA(72) PCN10H- 50P-2.54DSA(72) PCN10HA-16P-2.54DSA(72) PCN10HA-20P-2.54DSA(72) CL CL CL CL PCN10HA-24P-2.54DSA(72) CL PCN10HA-32P-2.54DSA(72) CL PCN10HA-44P-2.54DSA(72) PCN10HA-50P-2.54DSA(72) PCN10HB-16P-2.54DSA(72) PCN10HB-20P-2.54DSA(72) CL CL CL CL PCN10HB-24P-2.54DSA(72) CL PCN10HB-32P-2.54DSA(72) CL PCN10HB-44P-2.54DSA(72) PCN10HB-50P-2.54DSA(72) PCN10HC-16P-2.54DSA(72) PCN10HC-44P-2.54DSA(72) PCN10HC-50P-2.54DSA(72) PCN10HD-16P-2.54DSA(72) CL CL CL CL CL CL PCN10HD-24P-2.54DSA(72) CL PCN10HD-44P-2.54DSA(72) CL PCN10HD-50P-2.54DSA(72) CL Note: Please note that the above series can not mate with PCN10EA series. Unit: mm RoHS YES A41
31 PCN12 Series Plug: 2-row Right Angle Type Lot No. Merking PCN10-*P-2.54DS(71) Part Number CL No. Number of Contacts B PCB mounting pattern Plug: 2-row Right Angle Type With board prefixed lock pin attached PCN12A-110P-2.54DS(71) CL PCN12A-120P-2.54DS(71) CL PCN12A-128P-2.54DS(71) CL PCN12A-132P-2.54DS(71) CL PCN12A-144P-2.54DS(71) CL PCN12A-150P-2.54DS(71) CL PCN12A-164P-2.54DS(71) CL A B C D RoHS YES PCN12EA-*P-2.54DS(71) B PCB mounting pattern Part Number PCN12EA-110P-2.54DS(71) PCN12EA-116P-2.54DS(71) PCN12EA-120P-2.54DS(71) PCN12EA-132P-2.54DS(71) PCN12EA-144P-2.54DS(71) PCN12EA-150P-2.54DS(71) PCN12EA-164P-2.54DS(71) PCN12EA-190P-2.54DS(71) Lot No. Merking CL No. Number of Contacts A B C D RoHS CL CL CL CL CL YES CL CL CL A42
32 Socket: Straight Type PCN12-*S-2.54DSA(71) B PCB mounting pattern Socket: Straight Type With Board prefixed lock pin attached Part Number CL No. Number of Contacts A B C D RoHS PCN12-110S-2.54DSA(71) CL PCN12-116S-2.54DSA(71) CL PCN12-120S-2.54DSA(71) CL PCN12-124S-2.54DSA(71) CL PCN12-128S-2.54DSA(71) CL PCN12-132S-2.54DSA(71) CL PCN12-144S-2.54DSA(71) CL PCN12-150S-2.54DSA(71) CL PCN12-164S-2.54DSA(71) CL PCN12-190S-2.54DSA(71) CL PCN12-100S-2.54DSA(71) CL YES PCN12E-*S-2.54DSA(71) B PCB mounting pattern Part Number PCN12E-110S-2.54DSA(71) PCN12E-120S-2.54DSA(71) PCN12E-132S-2.54DSA(71) PCN12E-144S-2.54DSA(71) PCN12E-150S-2.54DSA(71) PCN12E-164S-2.54DSA(71) PCN12E-190S-2.54DSA(71) PCN12E-100S-2.54DSA(71) CL No. Number of Contacts A B C D RoHS CL CL CL CL CL CL CL CL YES A43
33 Plug: 3-row Right Angle Type (DIN standard type C) PCN12-96P-2.54DS(71) CL Plug: 3-row Right Angle Type PCN12A-96P-2.54DS(71) CL PCN10C-πS-2.54DS B PCB mounting pattern PCN10-πS-2.54DSA B PCB mounting pattern A44
34 Plug: 3-row Right Angle Type (Type C) With Board prefixed lock pin PCN12E-96P-2.54DS(71) CL B PCB mounting pattern Plug: 3-row Right Angle Type With Board prefixed lock pin PCN12EA-96P-2.54DS(71) CL B PCB mounting pattern A45
35 Socket: 3-row Straight Type PCN12-96S-2.54DSA(71) CL B PCB mounting pattern Socket: 3-row Straight Type PCN12E-96S-2.54DSA(71) CL B PCB mounting pattern A46
36 PCN13 Series Socket: 2-row Straight Type PCN13-*S-2.54DSA(71) B PCB mounting pattern Socket: 2-row Right Angle Type Part Number CL No. Number of Contacts A B C D RoHS PCN13-116S-2.54DSA(71) CL PCN13-120S-2.54DSA(71) CL PCN13-132S-2.54DSA(71) CL PCN13-144S-2.54DSA(71) CL PCN13-150S-2.54DSA(71) CL YES PCN13-164S-2.54DSA(71) CL PCN13-190S-2.54DSA(71) CL PCN13-100S-2.54DSA(71) CL PCN13-*S-2.54DS(71) B PCB mounting pattern Part Number CL No. Number of Contacts A B C D RoHS PCN13-116S-2.54DS(71) CL PCN13-120S-2.54DS(71) CL PCN13-130S-2.54DS(71) CL PCN13-132S-2.54DS(71) CL PCN13-144S-2.54DS(71) CL YES PCN13-150S-2.54DS(71) CL PCN13-164S-2.54DS(71) CL PCN13-100S-2.54DS(71) CL A47
37 Socket: 3-row Straight Type PCN13-48S -2.54DSA(71) 96S B PCB mounting pattern Socket: 3-row Right Angle Type Part Number CL No. Number of Contacts PCN13-48S-2.54DSA(71) CL PCN13-96S-2.54DSA(71) CL A B C D RoHS YES PCN13-48S -2.54DS(71) 96S B PCB mounting pattern Part Number CL No. Number of Contacts A B C D RoHS PCN13-48S-2.54DS(71) CL PCN13-96S-2.54DS(71) CL YES A48
38 B Application Pattern Vertical Connection 2-row type ' : Mounting hole center C.L. : Center line A49
39 3-row type 48 contacts: contacts: ' : Mounting hole center C.L. : Center line 48 contacts: A50
40 4-row type 48 contacts: ' : Mounting hole center C.L. : Center line 3-row 144 Contact type A51
41 B Application Pattern Horizontal Connection 2-row type ' : Mounting hole center C.L. : Center line 4-row type A52
42 3-row type 48 contacts: ' : Mounting hole center C.L. : Center line A53
43 B Application Pattern Horizontal Connection 2-row type 3-row type 4-row type 48 contacts: 17.9 ' : Mounting hole center C.L. : Center line 48 contacts: 17.9 A54
44 B Application Pattern Circuit Protection Function Type 2-row type 64 contacts : The sequential contacts are indicated at 22 points to contact No.1 to 4 and 26 to 32 in both rows a and b. 100 contacts : The sequential contact is indicated at 22 points to contact No.1 to 4 and 44 to 50 in both rows a and b. Stacking Connector ' : Mounting hole center C.L. : Center line 3-row type The sequential contacts are located at 22 points to a1 and a32. ' : Mounting hole center C.L. : Center line *G : 35, 30, 25, 45, 40 A55
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type)
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type) Double-sided two point Contact System Features 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard.
2.54mm Pitch Card Edge Connector
2.54mm Pitch Card Edge Connector CR22 Series Product Standards Rating Current rating: 3A Voltage rating: 0VAC Operating Temperature Range: - to +85ç (Note 1) Operating Humidity Range: 40 to % Storage Temperature
2mm Pitch Miniature Connector for HDD
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
0.5mm Pitch SMT Board to Board Connector
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
1.25mm Pitch Super Low profile Crimping Connector
1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
0.5mm Pitch SMT Board-to-Board Connector
0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
Power Supply Connectors For Industrial Equipment
Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (0/
Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB
I/O Card Interface Connectors
I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal
Half-pitch and Multi-function Two Piece Connector
Half-pitch and Multi-function Two Piece Connector FX2 Series Sttacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various
Low Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
Power Supply Connectors For Industrial Equipment
ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
0.4 mm Contact Pitch, Board-to-FPC Connectors
0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure Two-point contact system Features 1. Two stacking height options Two separate heights
High Current, Plastic Power Supply Connectors
High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)
7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
Miniature Waterproof Plastic Connectors
NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter
0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
Compact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI20/21 Series (a)space-saving design 7.0 51.75 Features 1. Compact design occupies minimum space Connectors are designed with small
High Current, High Density, Power Connectors
High Current, High Density, Power Connectors MCN1 Series Features 1. High Current Applications Board-to-board connectors are UL certified for 27 A per contact. 2. Hirose's Unique Compliant Press-fit connection
125A High-Current Waterproof Connectors
125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure
Compact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth
Connections of the Various Units and Device Interiors. GT8 Series. High-Pressure Connectors <GT8, GT8A, GT8Z and GT8E>
GT 16 GT 13 GT 5 PO5G GT 11 GT8 Series High-Pressure Connectors GT 22 GT 25 GT 9 GT 8 GT 15 GT 18W GT 10 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 Features Crimp
3.5mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard)
3.mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard) MDF6 Series Inner type positive lock Features 1. Miniature type with 3.mm pitch A miniature, space-saving
0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
.4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization
Picoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
High Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
High speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together
CF Card Connectors. Complies with Compact Flash Association. MI20/21 Series. Features. Applications
CF Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth for miniaturization
High speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together
2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
GT16 Series. Subminiature Connectors for coaxial cables
GT5 Sep.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT16 GT13 GT16 Series Subminiature Connectors for coaxial cables
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz
NEW Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156NB Series Overview Developed for inspection of high frequency circuits used in portable terminals.verification of the circuit performance is
2mm pitch, high reliability with lock, board to cable and cable to cable connector
NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet
DC to 6GHz Ultra-Small Coaxial Switch
DC to 6Hz Ultra-Small Coaxial Switch MS-147 Series Outline The ultra-small MS-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (substrates)
0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged
GT32 Series Shielded connector for high speed transmission / USB3.0, HDMI For Network, High speed communication
Sep..208 Copyright 208 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. GT32 Series ---- Shielded connector for high speed transmission / USB3.0, HDMI.4 ---- Features Full shielded structure Suitable for
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors RM-W Series ssembly type (straight plug/rm5w) 5 Ø.5 Ø.5 Mar..0 Copyright 0 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø Overview
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector FH63 Series Single action lock (Dimension diagram : 30pos.) 2.8mm 21.94mm Features 1. Automatic single
0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features
0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors
.5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached
0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
Circular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
New Connectors For Low Profile Power Supply
NEW New Connectors For Low Profile Power Supply RP34L Series Receptacle installed height RP34L Existing RP34 (3-contact type) (2-contact type) Fig.-➀ Features 1. Low profile: These receptacles are designed
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The
For Antenna. In-vehicle shielding connector with twin crimp technology. GT5 Series Connectors for coaxial cables ----
Patented GT In-vehicle shielding connector with twin crimp technology GT6 GT6 GT GT2 GT In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems, RACS antenna
4000 Series Buccaneer
Sealed to IP66 IP6 and IP69K when mated IP6 rating tested at 1.054kg/sq cm (15lb/sq in) m depth for 2 weeks, & pole configuration Power ratings up to 1A, 600V Cable range from to 7mm Diameter over coupling
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
RA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
CF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
ARinc 600 Series. Rack & Panel Rectangular Connector. Brief introduction. Specification. 1. Material and surface treatment. 3. Electric properties
ARinc 600 Series Rack & Panel Rectangular Connector Brief introduction Good performance of environment resistance 216 kinds of anti-misoperation styles High density up to 800 signal contacts Low insertion
AUG 16 Rev C2
Product Specification 23 AUG 16 Rev C2 025 Series Connector 1Row 1. SCOPE 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
BH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors
0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors DF36 Series High contact reliability Effective mating length of 0.4 mm 1.5±0. (Mated height) (0.4) (Effective mating length) Enhanced
Connector for Internal Serial Transmission. FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-2 October 2008 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
Product Specification Rev A
Product Specification 108-6116 1. Scope :.5 Signal DBL Lock Connector 18P 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
Waterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Features 1. Waterproof The JR-W series is a rugged, waterproof connector series that is IP67 and IP68 rated in the mated condition. IP67: Left in water at a depth
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
GT11 Series. Connectors for shielded cables. Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT 22 GT 25 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 PO5G GT 16 GT 10 GT 18W GT 9 GT 8 GT 15 GT 13 GT 5 GT11 Series Connectors for shielded cables Features A housing lance systems has been used to
HPH PCB/MALE CABLE HPH SERIES PERFORMANCE/SPECIFICATION
PCB/ CABLE Straight TBS, R/A TBS, male crimp, Flex SMT, solder bucket, stacking, pin carrier Pin size/current: 0.6mm/4 amp Pitch: 1.905mm/0.075" on a staggered pitch of 0.953mm/0.0375 No. of contacts:
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board mounting
0.5mm and 1mm Pitch Connectors For FPC/FFC
0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. Ease of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock)
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
SMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Waterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
SMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
Product Specification AMP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version
Product Specification 108-60026 MP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version 1. 1.1 Scope: Contents: This specification covers the requirements for product performance, test methods and
Castellated/Hex Nut. Insert Retaining Ring. Contact Insert
Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Contact Insert Sealing Cap Clip Gland Cage Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding
3M CP2 Press-Fit Headers and Sockets, 2 mm
1 of 7 3M CP2 Press-Fit Headers and Sockets, 2 mm A-Style CP2 Connectors CP2-SA110-G1-KR Right Angle Socket Connectors mated to CP2-HA110-GA1-KR Header Connectors 78-5102-0083-1 Revised Date: February
Connector for Internal Serial Transmission FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-4 June 2013 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
STRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
about us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.
table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
*HDMI-STYLE WEATHERTIGHT CONNECTORS *HDMI-STYLE WEATHERTIGHT CONNECTORS NPB C714
601 E WILDWOOD VILLA PARK, IL 60181 P: 630.834.7504 F: 630.834.8540 WWW.CONXALL.COM FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when panel connector is rear mounted and mated to the cable)