... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS

Size: px

Start display at page:

Download "... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS"

Cori Dennis
5 years ago
Views:

1 ... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0

2 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe during the 980s, use a snap-on interface, a blend of size, reliability and performance, Though smaller and lighter than the SMB by approximately 30%, the MCX still preserves the SMB's inner contact and overlapping dielectric insulator dimensions so that it can provide consistent electronic performance from DC-6 GHz.. Miniature snap-on connectors which offer an excellent blend of size, weight, durability, and performance for applications such as GPS, wireless communication, base station,wlan, fixed communication systems, testing, and instrumentation applications. CONTENTS Description... Interface dimensions... Technical data... 3 Cable connectors... 4 PCB Connectors... 7 Assembly instruction... 8 Mounting Holes... 3

3 MCX SERIES PLUG JACK LETTER mm inch min. max. min. max A B 3.05 NOM..0 NOM. C E F G H J LETTER α β A B C F G H mm inch min. max. min. max NOM NOM Interface dimensions conformable to the standards: International: IEC Europe: CECC 90 Germany: DIN 473, VG 9550 IP rating (interface, mated) IP68

4 TECHNICAL DATA ELECTRICAL DATA Impedance Frequency range Voltage Rating V.S.W.R. Insulation resistance Contact resistance 50 Ohm DC 0-6 GHz 50 V peak Straight styles:.0 Right angle styles:.5 0,000 M Ω contact: 6 Ω ; Outer contact: 3 Ω MECHANICAL DATA Mating Connector Durability (matings) Slide-on, push-pull, threaded 500 mating MATERIAL DATA Male Contact Female contact Insulator Crimp Ferrule Brass Beryllium copper center and outer, gold plated Teflon Copper ENVIRONMENTAL Temperature Range Thermal shock High temperature test Corrosion Vibration -40 C to + 55 C MIL STD 0 - method 07 condition C MIL STD 0 - method 08A condition D MIL STD 0 - method 0 condition B MIL STD 0, method 04, condition D 3

CABLE CONNECTORS Straight cable plugs (male) RoHS 30-03-M04-00

075 DIA.] 7.00 [.76].30 [.09 DIA.] 3.0 [.6 DIA.

5 CABLE CONNECTORS Straight cable plugs (male) RoHS M04-00 LMR00/RG74/RG36 A0 Cable entry crimp 5.70 [.68].65 [.065 DIA.].70 [.06 DIA.] 0.00 [.394] 3.0 [.6 DIA.] 4.00 [.57 DIA.] M-00 RG78 A0 Cable entry crimp 4.0 [.559].05 [.04 DIA.].90 [.075 DIA.] 7.00 [.76].30 [.09 DIA.] 3.0 [.6 DIA.] M-004 Semi-rigid.086/RG405 A0 Cable entry soldered 3.0 [.50].0 [.087 DIA.] 3.40 [.34 DIA.] 4

CABLE CONNECTORS Right angle cable plugs (male) RoHS 30-3-M04-005 LMR00/RG74/RG36 8.90 [.

] 30-3-M-006 RG78 A03 Cable entry crimp 8.90 [.350] 9.00 [.354] 7.00 [.76].30 [.09 DIA.] 3.0 [.6 DIA.].05 [.

6 CABLE CONNECTORS Right angle cable plugs (male) RoHS 30-3-M LMR00/RG74/RG [.350] Cable entry crimp 0.50 [.43] 0.00 [.394] 3.0 [.6 DIA.] 4.00 [.57 DIA.] A03.65 [.065 DIA.].70 [.06 DIA.] 30-3-M-006 RG78 A03 Cable entry crimp 8.90 [.350] 9.00 [.354] 7.00 [.76].30 [.09 DIA.] 3.0 [.6 DIA.].05 [.04 DIA.].90 [.075 DIA.] 30-3-M RG40/Semi-rigid.4 A [.394] Cable entry crimp 8.00 [.35] 3.70 [.46 DIA.] 5.00 [.97 DIA.] 5

CABLE CONNECTORS Straight cable jacks(female) RoHS 30-0-M04-00

065 DIA.].70 [.06 DIA.] 0.00 [.394] 3.0 [.6 DIA.] 4.00 [.57 DIA.

04 DIA.].90 [.075 DIA.] 7.00 [.76].30 [.09 DIA.] 3.0 [.6 DIA.

7 CABLE CONNECTORS Straight cable jacks(female) RoHS 30-0-M04-00 LMR00/RG74/RG36 A0 Cable entry crimp 4.50 [.77 DIA.] 5.50 [.60].65 [.065 DIA.].70 [.06 DIA.] 0.00 [.394] 3.0 [.6 DIA.] 4.00 [.57 DIA.] 30-0-M-0 RG78 A0 Cable entry crimp 4.50 [.77 DIA.] 4.00 [.55].05 [.04 DIA.].90 [.075 DIA.] 7.00 [.76].30 [.09 DIA.] 3.0 [.6 DIA.] 30-0-M3-0.3mm/.3mm/.37mm Cable A05 Cable entry solder 4.50 [.77 DIA.] 5.00 [.59] 3.0 [.6 DIA.] 6

PCB CONNECTORS PCB jacks(female) RoHS Mount Hole 30-0-5L-03 M0 With stand-off 9.50 [.

80 [.03 SQ.] 6.00 [.36 SQ.] Soldering Pads 30--5L-04 M0 With stand-off 9.00 [.354] 0.

] 3.00 [.8] 6.00 [.36 SQ.] Mount Hole 30--6L-05 M0 SMT mounted 9.00 [.354] 6.00 [.36] 6.

8 PCB CONNECTORS PCB jacks(female) RoHS Mount Hole L-03 M0 With stand-off 9.50 [.374] 4.50 [.77] 4.50 [.77 DIA.] 0.5 [.00] 0.95 [.037 DIA.] 3.00 [.8] 4.00 [.57] 3.00 [.8] [.03 SQ.] 6.00 [.36 SQ.] Soldering Pads 30--5L-04 M0 With stand-off 9.00 [.354] 0.00 [.394] 4.00 [.57] 0.5 [.00] 4.50 [.77 DIA.] 0.95 [.037 DIA.] 3.00 [.8] [.03 SQ.] 3.00 [.8] 6.00 [.36 SQ.] Mount Hole 30--6L-05 M0 SMT mounted 9.00 [.354] 6.00 [.36] 6.00 [.36] 0.35 [.04] 0.95 [.037 DIA.] 3.00 [.8] 3.00 [.8] 6.00 [.36 SQ.] 4.50 [.77 DIA.] 7

ASSEMBLY INSTRUCTIONS A0 Ferrule Contact Stripping Dimensions c b a Heatshrink sleeve (option) 30-03-M-00 30-0-M-0 30-03-M04-00 30-0-M04-00 HEX. Crimp Tool (mm [in]) RG78.54 [.00].5 [.

Strip the cable as Striping Dimensions. 4. Slide the cable into the body until stops. 3. Slide the center contact on until it bottom against the cable dielectric.

9 ASSEMBLY INSTRUCTIONS A0 Ferrule Contact Stripping Dimensions c b a Heatshrink sleeve (option) M M M M04-00 HEX. Crimp Tool (mm [in]) RG78.54 [.00].5 [.098] LMR00/RG74/RG [.8].5 [.098] a Stripping Length (mm [in]) b [.079] [.079] c 8.5 [.335] 0 [.394]. Slide the heatshrink sleeve onto the cable (option). Slide the ferrule onto the cable. Strip the cable as Striping Dimensions. 4. Slide the cable into the body until stops. 3. Slide the center contact on until it bottom against the cable dielectric. Solder the center contact onto the cable. 5. Slide the ferrule over the braid. Crimp the ferrule with crimping tool (see table). 3. Fan the braid. 6. Cut the excess of braid if necessary. Slide the sleeve over the ferrule and heatshrink it in place (option). 8

ASSEMBLY INSTRUCTIONS A0 Contact Stripping Dimensions a Heatshrink sleeve (option)

Slide the heatshrink sleeve onto the cable (option).

. Slide the center contact on until it bottom against the cable dielectric.

10 ASSEMBLY INSTRUCTIONS A0 Contact Stripping Dimensions a Heatshrink sleeve (option) Stripping Length (mm [in]) M [.8] RG405/Semi-rigid.086. Slide the heatshrink sleeve onto the cable (option). Strip the cable as Striping Dimensions. 4. Solder the body onto the cable.. Slide the center contact on until it bottom against the cable dielectric. Solder the center contact onto the cable. 5. Slide the heatshrink sleeve over the body and heatshrink it in place (option). 3. Slide the cable into the body until it stops. 9

ASSEMBLY INSTRUCTIONS A03 Ferrule Cap Stripping Dimensions c b a Heatshrink sleeve (option) 30-3-M-006 30-3-M04-005

5 [.8]. [.047].3 [.09] 9 [.354]. Slide the heatshrink sleeve onto the cable (option).

Crimp the ferrule with crimping tool (see table). Solder the inner conductor. 3. Fan the braid. 5.

11 ASSEMBLY INSTRUCTIONS A03 Ferrule Cap Stripping Dimensions c b a Heatshrink sleeve (option) 30-3-M M HEX. Crimp Tool Stripping Length (mm [in]) (mm [in]) a b c RG78.54 [.00]. [.047].3 [.09] 7.5 [.95] LMR00/RG74/RG [.8]. [.047].3 [.09] 9 [.354]. Slide the heatshrink sleeve onto the cable (option). Slide the ferrule onto the cable. Strip the cable as Striping Dimensions. 4. Crimp the ferrule with crimping tool (see table). Solder the inner conductor. 3. Fan the braid. 5. Place the cap into the body. 3. Push the body under the braid. Slide the ferrule over the braid. 6. Press on the cap until stops. Slide the sleeve over the ferrule and heatshrink it in place (option). 0

ASSEMBLY INSTRUCTIONS A04 Heatshrink sleeve (option) Back

Strip the cable as Striping Dimensions. 3.

12 ASSEMBLY INSTRUCTIONS A04 Heatshrink sleeve (option) Back Nut Stripping Dimensions a Stripping Length (mm [in]) 30-3-M RG40/Semi-rigid.4 3 [.8]. Slide the heatshrink sleeve onto the cable (option). Strip the cable as Striping Dimensions. 3. Solder the cable onto the body. Screw the back nut onto the body.. Slide the cable into the body until it stops. Solder the inner conductor. 4. Slide the sleeve over the body and heatshrink it in place (option).

ASSEMBLY INSTRUCTIONS A05 Solder Sleeve Insulator Contact Stripping Dimensions c b a HEX. Crimp Tool (mm [in]) 30-03-M-00.3mm/.3mm/.37mm Cable.54 [.00].5 [.098] [.039] [.

. Slide the Solder Sleeve onto the outerductor. Solder the Solder Sleeve onto the cable (ensure the position of the Solder Sleeve). Flush 5. Crimp the with crimping tool (see table).

13 ASSEMBLY INSTRUCTIONS A05 Solder Sleeve Insulator Contact Stripping Dimensions c b a HEX. Crimp Tool (mm [in]) M-00.3mm/.3mm/.37mm Cable.54 [.00].5 [.098] [.039] [.433] a Stripping Length (mm [in]) b c. Strip the cable as Striping Dimensions. Soaking the inner and outer conductor with tin. 4. Slide the cable into body until it stops.. Slide the Solder Sleeve onto the outerductor. Solder the Solder Sleeve onto the cable (ensure the position of the Solder Sleeve). Flush 5. Crimp the with crimping tool (see table). Slide a Heatshrink Sleeve over the and heatshrink it in place (option). 3. Slide the Insulator onto the dielectric until it stops. Slide the Contact onto the cable until it stops. Solder the Contact onto the cable. 3

14 MOUNTING HOLES [055 DIA].0 [.047] 5.0 [.05] 5.0 [.05].0 [.043 DIA] 3.50 [.38 DIA.].0 [.043 DIA.].05 [.08] 6.50 [.56] 3.5 [.8] 6.50 [.56].40 [.094] M0 M0 3

15 Cmpter Electronics, Ltd. Office Adress: #7-5, East Business Area, DanTu District, ZhenJiang City, 08, JS, China Tel: Fax: sales@cmpter.com Website:

MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22

MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22 Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...