Power Supply Connectors For Industrial Equipment

Size: px

Start display at page:

Download "Power Supply Connectors For Industrial Equipment"

Adelia Allison Lewis
6 years ago
Views:

ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.

Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Shape of opening prevents reverse insertion Features 1.

00V C max. and 10/contact (60/6contacts) of rating current. 2.

1 ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at or contact your Hirose sales representative. Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Shape of opening prevents reverse insertion Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (60/6contacts) of rating current. 2. Housing design prevents incorrect insertion Opening section is designed to prevent reverse insertion and mating direction is easily checked. dditionally, the opening section is keyed to prevent misalignment of plugs in parallel applications. 3. Reduced Size When compared to traditional products, Hirose s plug is smaller in size by 65% and the receptacle is smaller by 55%. Reliable contact structure Sealing section (3 contacts) Contact spring guard section retainer s this window is opened, contact section can easily be checked. Wall structure prevents retainer deformation pplicable Wire Size (WG No.) Since the retainer portion is lowered by onestep, the possibility of spring deformation is minimized even if the lock is released. 4. Reliable contact structure ➀Three point contact ➁Gold plated contacts (standard) with high-level environmental resistance ➂Contact spring guard structure ➃Structure prevents retainer deformation Label space 5. Easy Cable ssembly ➀Use of dedicated crimping tools will make harness work easier.one tool crimps both WG#16 and WG#18 wire. ➁Positive lock can be felt on contact insertion. ➂Release of contact lock can easily be performed with dedicated jig, which facilitates the wiring modification after assembly. void any short between adjacent contacts Two layer structure enables high-density mounting

2 F R S 7 1 F F 6 12 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at or contact your Hirose sales representative. Product Specifications Ratings Operating temperature range Voltage rating Current rating -55ç~+105ç 600V C 10 Description 1.Contact resistance 2.Insulation resistance 3.Withstanding voltage 4.Durability 5.Vibration 6.Shock 7.Temperature cycle 8.Humidity 9.Salt spray Specifications 10mø max. 1000Mø min. No flashover or insulation breakdown. ➀Contact resistance : 20mø max. ➁No damage, cracks or looseness of parts ➀No electrical discontinuity of 10µs or more. ➁Contact resistance : 20mø max. ➂No damage, cracks or looseness of parts ➀Contact resistance : 20mø max. ➁Insulation resistance : 1000Mø min. ➂No damage, cracks or looseness of parts ➀Contact resistance : 20mø max. ➁Insulation resistance : 1000Mø min. ➂No damage, cracks or looseness of parts ➀No corrosions Requirements 100m 500V DC 2200V C / 1 minute cycles Frequency:10 to 55Hz,single amplitude of 0.75mm, 2 hours,3axis cceleration: 490m/s 2 Duration: 11ms Test at sine half-wave, 3 axes, bi-directional three times, respectively. Temperature : -55/+5~+35/+85/+5~+35ç Time : -30/+10~+15/+30/+10~15Minutes 5 cycles 96 hours at 40±2ç and humidity of 90~95% 5% salt water for 48 hours Materials Parts Contacts Insulator Metal fixture Material Copper alloy PBT (UL94V-0) Copper alloy Finish Gold plating Tin reflow plating BComparison In Size With Conventional Equivalent Plug Receptacle Width Height Depth Width Height Depth PX For volume ratio, plug is downsized to : nearly 65%; and receptacle : nearly 55%. (mm) company-made PX50-F6S Plug width depth height Receptacle PX10 F6WP width height depth 2

3 ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at or contact your Hirose sales representative. Receptacles 6position/2row Type PX10-F6WP(50) BDimensions For Circuit Board Installation(For your reference) t=1.6~2.4 BPCB mounting pattern Where t=1.6 (Setting value depends on thickness of boards.) 3

4 ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at or contact your Hirose sales representative. 4Position/2 Row Type PX10-D4WP(50) PX10 D4WP Label space size terminal No terminal No.8 5 D 8 R D S 1 4 terminal No.1 terminal No BDimensions For Circuit Board Installation(For your reference) t=1.6~2.4 P=3.4 terminal No.6 terminal No.5 terminal No.2 terminal No.1 8-Ø1.4 R (through-hole) 10.2 terminal No.8 terminal No.7 terminal No.4 terminal No.3 P= π (6) (8) BPCB mounting pattern board end (through-hole) 22.8 connector position Where t=1.6 (Setting value depends on thickness of boards.) 4

5 ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at or contact your Hirose sales representative. Plug 6-Position Type PX50-F6S Position Type terminal No.2 terminal No.1 terminal No.3 terminal No.4 D (This picture shows the state of cable insertion.) PX D4S PX50-D4S Label space size

com, or contact your Hirose sales representative.

1 BInstallation status ➀ ➁ BInstallation method 6-Position

4WS-CV <Caution>The holder cover is not a rugged support

6 ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at or contact your Hirose sales representative. Simple-Type Plug Holder Cover For 6-Position Type PX-6WS-CV For 4-Position Type PX-4WS-CV PX- 4WS-CV 10.6 Label Space Size BInstallation status ➀ ➁ BInstallation method 6-Position Type ➂ ➃ 4-Position Type PX50-D4S (2-layerd) D D PX- 4WS-CV <Caution>The holder cover is not a rugged support fixture but only meant for alignment of the plugs. If external force is imposed by pulling of cables, etc. before mating, please bundle all cables together around the connector with union bands, etc. 6

7 ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at or contact your Hirose sales representative. Crimp contact pplicable wire size Packaging Quantity Reel PX50-SC ,000 16, 18 Bag PX50-SC Please order by integral multiple of the packing volume. Tools Type Description pplicable contacts Press unit CM utomatic PX50-SC-231 pplicator P105-PX Manual Hand tool ( ) HT104/PX PX50-SC-131 Contact extraction tool PX50-SC-TC PX50-SC- 31 For our manual crimping tools, we employ the rotate-replace procedure to use the crimper depending on wire size. pplicable WG size Rotate to set the crimper such that applicable WG size fits the crimping section. Note : Since manual crimping tool cannot provide fine adjustment of crimp height, please use the proper crimp height of auto crimper in crimping of the wires other than specified ones 7

hirose-connectors.com, or contact your Hirose sales representative.

<WRNING> When the crimp terminal drawing jig is inserted and pushed from the

be released. Then please extract the cable.

below. Be careful that any mistake will lead to the damage of terminal.

8 ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at or contact your Hirose sales representative. Crimp Terminal Drawing Jig PX-50-SC-TC PX50-SC-TC CL <WRNING> When the crimp terminal drawing jig is inserted and pushed from the fitting section of a connector as shown below, retainer lock of the terminal will be released. Then please extract the cable. If the retainer is too lowered after extracting terminal, put it in a former position and reinsert. Position and direction of the jig top to be inserted are as shown in the Figures below. Be careful that any mistake will lead to the damage of terminal. How To Extract Crimp Terminal ➀ ➁ ➂ ➃ Insert the jig top into the peak of convex section on terminal hole. 5-23,OSKI 5-CHOME,SHINGW-KU,TOKYO ,JPN PHONE: , FX: The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.

Power Supply Connectors For Industrial Equipment

Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (0/