Introduction Fuseholders. Electroustic Ltd (0)

Transcription

1 Introduction Fuseholders Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA and IMQ, all types are manufactured from high grade lame retardant nylon and polyester materials. Designed primarily for and 6.3 x 32mm size fuses with protection against shock to categories PC1, PC2 and PC3. There s a choice of styles for in-line, PCB mounting and panel mounting (screw or snap it) with terminal options for solder, 2.8mm, 4.8mm or 6.3mm tabs or PC spills.dust and waterproof designs provide a front of panel seal to IP68 in both and 6.3 x 32mm size fuses. Fuse carrier styles include captive drawer, screw cap - with screw driver release, bayonet cap - with screw driver release and screw cap - with inger release. ing IP68 ing IP66 ing PC Mounting Base Mounting In-line Fuseholders 190

2 Protection Category Category PC1: No integral protection against electric shock. If required, Designers/ Manufacturers must provide additional protection against electric shock on equipment. Category PC2: With integral protection against electric shock. Fuseholders shall have live parts inaccessible to IEC Standard Test Finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn. Category PC3: With integral protection against electric shock. Fuseholders shall have live parts inaccessible to IEC mm dia. rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse, is being inserted or withdrawn. 191 Fuseholders

3 Panel/PC Mounting Captive Carriers Touchproof, PC3 Snap Fit to Panel Snap Fit to Panel FX0430/63 FX0430/PC Protection Category PC3 Panel Sizes 1.0, 1.5, 2.0 and 3.0mm Captive Drawer 10A, 250V (16A, 250V UL) 2.8, 4.8 or 6.3 tabs Protection Category PC3 Panel Sizes 1.0, 1.5, 2.0 and 3.0mm Captive Drawer 10A, 250V (16A, 250V UL) PC spills Protection Category PC3 Captive Fuse Carrier 10A, 250V (16A, 250V UL) FX0460 FX0430/Termination FX0430/PC FX0460 Captive Drawer Captive Drawer /28 (2.8mm solder), /48 (4.8mm tab), /63 (6.3mm tab) /PC (PC spills) 1.6W 23ºC) 500V d.c. 500V d.c. 500V d.c. >2kV >2kV >2kV Body/Drawer: Nut: Glass Filled Contact tags: Brass, Tin Plated Fuse Clips: Phospher Bronze, Nickel Plated Contact tags: Brass, Tin Plated Fuse Clips: Phospher Bronze, Nickel Plated Accessories: P.No (See page 205) Note: See page P201 (type FX0416) for PC version Fuseholders 192

4 ing and Snap Fit Touchproof, PC2 Bayonet Cap/Screwdriver 10A, 250V (16A, 250V UL) Snap Fit to Panel Panel Size: Body: Nut: Accessories: FX0357 FX0367 FX0357, FX0359 Bayonet cap/screwdriver release 50Hz Glass Filled P.No (See page 206) FX0359 FX0369 Panel Sizes 1.0 & 1.5 and 2.0 & 3.0mm Bayonet Cap/Screwdriver 10A, 250V (16A, 250V UL) FX0367/Panel, FX0369/Panel /1 ( mm panel, black sleeve) /2 ( mm panel, grey sleeve) Bayonet cap/screwdriver release 50Hz P.No (See page 205) 193 Fuseholders

5 ing and Snap Fit Touchproof, PC2 Keyway Panel Cutout (FX0454) D Panel Cutout (FX0455) 10A, 250V (16A, 250V UL) FX0454, FX0455 FX0454/S, FX0455/S High Proile Bezel Keyway Panel Cutout (FX0454/S) D Panel Cutout (FX0455/S) 10A, 250V (16A, 250V UL) Snap Fit to Panel Panel Sizes 1.0 & 1.5 and 2.0 & 3.0mm 10A, 250V (16A, 250V UL) FX0458 FX0454, FX0455 FX0454/S, FX0455/S FX0458 Panel Size: /1 ( mm panel, black sleeve) /2 ( mm panel, grey sleeve) 50Hz 50Hz 50Hz Body: Nut: Glass Filled Glass Filled Accessories: P.Nos , & (See page 206) P.Nos , & (See page 206) P.Nos (See page 205) Fuseholders 194

6 ing Touchproof, PC2 Fuse Sizes: 6.3 x 32mm (FX0415) 6.3 x 25mm (FX0416) Screw Cap/Hand 13A, 250V (16A, 250V UL) FX0415, FX0415/S, FX0416 FX0416/S Fuse Sizes: 6.3 x 32mm (FX0415/S) 6.3 x 25mm (FX0416/S) 13A, 250V (16A, 250V UL) FX0415, FX0416 FX x 32mm FX x 25mm Screw cap/hand release 4.8 series tabs 13A, 250V (16A, 250V UL) 4W (@ 23ºC) 500V d.c. 50Hz <5mΩ FX0415/S, FX0416/S FX0415/S x 32mm FX0416/S x 25mm Screw cap/hand release 4.8 series tabs 13A, 250V (16A, 250V UL) 4W (@ 23ºC) 500V d.c. 50Hz <5mΩ Body: Nut: Accessories: Glass Filled P.No (See page 205) Glass Filled P.No (See page 205) 195 Fuseholders

7 ing and Snap Fit Touchproof, PC2 Fuse Size 6.3 x 32mm 16A, 250V (20A, 250V UL) FX0417 Snap Fit to Panel FX0418 Fuse Size 6.3 x 32mm Panel Sizes 1.0 & 1.5 and 2.0 & 3.0mm 16A, 250V (20A, 250V UL) Panel Size: Body: Sleeve: FX x 32mm 6.3 series tabs 16A, 250V 20A, 250V a.c. UL 4W (@ 23ºC) >10⁶ 500V d.c. >2kV Glass Filled Brass, Silver Plate FX0418/Panel 6.3 x 32mm /1 ( mm panel, black sleeve) /2 ( mm panel, grey sleeve) 6.3 series tabs 16A, 250V 20A, 250V a.c. UL 4W (@ 23ºC) >10⁶ 500V d.c. >2kV Glass Filled Brass, Silver Plate Fuseholders 196

8 ing, PC2 FX0354 FX0354/S Low Proile Bezel Keyway Panel Cutout High Proile Bezel Keyway Panel Cutout FX0354 FX0354/S Body: Nut: Accessories: 50Hz Glass Filled P.No and (See page 205) 50Hz Glass Filled P.No and (See page 205) 197 Fuseholders

9 ing, PC1 Screw Cap/Hand FX0296/S FX0296 Screw Cap/Hand FX0296/1 FX0296, FX0296/S FX0296/1 FX0296 Screw cap/hand release FX0296/S Screw cap/hand release Body: Nut: Accessories 500V d.c. 50Hz <5mΩ Glass Filled Nylon UL94V-0 rated Glass Filled Brass, Silver or Tin Plated P.No (See page 205) 500V d.c. 50Hz <5mΩ Glass Filled Nylon UL94V-0 rated Glass Filled Brass, Silver or Tin Plated P.No (See page 205) Fuseholders 198

10 ing Touchproof, Sealed to IP68, PC2 Panel sealed to IP68 Touchproof Category PC2 Fuse Size 6.3 x 32mm Screw cap/screwdriver/hand 16A. 250V ac FX0419 FX0462 Panel sealed to IP68 Touchproof Category PC2 Screw cap/screwdriver/hand 10A. 250V ac FX0463 Panel sealed to IP68 Touchproof Category PC2 High Proile Bezel Screw cap/screwdriver/hand 10A. 250V ac FX0419 FX0462 FX x 32mm 5.0 x 20mm 5.0 x 20mm Screw cap/screwdriver/hand release Screw cap/screwdriver/hand release Screw cap/screwdriver/hand release 6.3 series tabs 16A, 250V ac 10A, 250V ac 10A, 250V ac 500V d.c. 50Hz 50Hz 50Hz Body: Nut: Glass Filled Glass Filled Glass Filled Tightening Torque: Panel Nut: Nm ( lbf.in.) 0.5Nm (4.4lbf.in.) Nm ( lbf.in.) 0.5Nm (4.4lbf.in.) Nm ( lbf.in.) 0.5Nm (4.4lbf.in.) Sealing: IP68 to EN60529:1992+A2:2013 (10m for 2weeks) IP68 to EN60529:1992+A2:2013 (10m for 2weeks) IP68 to EN60529:1992+A2:2013 (10m for 2weeks) Accessories: P.nos (see page 205) P.nos (see page 205) 199 Fuseholders

11 ing Touchproof, Sealed to IP66, PC1 High Proile Sealed to IP66 High Proile FX0345 FX0365 Sealed to IP66 Screw Cap/Hand Large Cap for Easy Grip FX0345, FX0345/A FX0365, FX0365/A Body & Spacer: Insulating Sleeve: 4W 23ºC) 500V d.c. 50Hz (ambient air temp + fuse temp rise) Glass Filled Glass Filled Nylon UL94HB rated 4W (@ 23ºC) 500V d.c. 50Hz (ambient air temp + fuse temp rise) Glass Filled Glass Filled Nylon UL94HB rated Sealing: Protection Classiication IP66 to EN60529:1992+A2:2013 Retains sealing integrity with cap removed since they are both panel and barrier sealed Variants: /A Silicone O ring, Op. Temp. 55 C to +85 C /A Silicone O ring, Op. Temp. 55 C to +85 C Fuseholders 200

12 PC Mounting PC1, PC2 and PC3 PC Horizontal Mount PC Horizontal and Vertical Mount FX0461 Protection Category PC3 Captive Fuse Carrier PC Spills 10A, 250V (16A, 250V UL) Fuse Sizes Bayonet Cap/Screwdriver 10A, 250V PC Horizontal Mount FX0456 FX0457 Two or Three PC Spills Screw Cap/Hand FX0330 FX0342 FX0461 FX0456 FX0457 FX0330 FX0342 Bayonet cap/screwdriver release Screw cap/hand release PC Spills PC Spills 10A, 250V FX PC Spills FX PC Spills 1.6W 23ºC) 500V d.c. 500V d.c. >2kV 50Hz 50Hz <5mΩ Body: End Bung: Glass Filled Brass, Tin Plated 201 Fuseholders

13 PC and Base Mounting, PC1 PC Mount PC Spills Base Mount FX0321 Solder Tags FX0267 Base Mount Solder Tags FX0360 FX0321 FX0267 FX0360 PC Spills 500V d.c. >10⁵ 500V d.c. >10⁴ 500V d.c. 50Hz (Clip to clip) 50Hz 50Hz (ambient air temp + fuse temp rise) Base Material: Glass Filled Glass Filled Glass Filled Nylon UL94HB rated Phospher Bronze, Tin Plated Phospher Bronze, Tin Plated Phospher Bronze, Tin Plated Accessories: P.No (See page 205) P.No (See page 205) Fuseholders 202

14 Base Mounting, PC1 Base Mount Fuse Sizes: 6.3 x 32mm (FX0326) 6.3 x 25mm (FX0331) Solder Tags 13A, 250V FX0326 FX0331 Base Mount Fuse Size 6.3 x 32mm Solder Tags 5A, 250V FX0327 (ambient air temp + fuse temp rise) Base Material: FX0326, FX0331 FX x 32mm FX x 25mm 6.3 series tabs 13A, 250V >10⁴ 500V d.c. 50Hz <5mΩ Glass Filled Clips: Phospher Bronze, Tin Plated Tabs: Brass, Tin Plated FX x 32mm 5A, 250V >10⁵ 500V d.c. 50Hz Glass Filled Phospher Bronze, Tin Plated 203 Fuseholders

15 In-Line PC1 and In-Line Sealed to IP66, PC1 In-line In-line FX0180, FX0280, FX0380 FX0185, FX0285, FX0385 Fuse Sizes, 6.3 x 25mm and 6.3 x 32mm Screw Terminal (Solder to order) 10A, 50V (250V Inaccessible) UL Approved (Black Only) Clear or black Sealed to IP66 Fuse Sizes, 6.3 x 25mm and 6.3 x 32mm Screw Terminal (Solder to order) 10A, 50V (250V Inaccessible) UL Approved (Black Only) Clear or black Cable Acceptance: High Voltage Proof Test: (ambient air temp + fuse temp rise) Sealing: Screw Tightening Torque Body - Clear: Body - Black: Grommet: O Ring: Terminals: Grub Screw: Colour: FX0180/colour, FX0280.colour, FX0380/Colour FX x 25mm FX x 32mm FX0180 1mm² conductor (max.) Screw terminal (solder to order) 10A, 50V (250V where inaccessible inside equipment) >10⁵ 500V d.c. 2kV (50Hz for 1 minute) 20ºC to +90ºC 0.226Nm (2lb/in) Polybutene UL94HB rated Nylon 6 UL94V-0 rated Brass, Nickel Plated Stainless Steel (Black version only) Clear - no suix, /BK - Black FX0185/Colour, FX0285/colour, FX0385/Colour FX x 25mm FX x 32mm FX0185 1mm2 conductor (max.) 1mm to 2.64mm overall diameter Stepped grommet: Stage 1: 1.00mm to 1.40mm Stage 2: 1.50mm to 1.90mm Stage 3: 2.0mm to 2.64mm Screw Terminal (solder to order) 10A, 50V (250V where inaccessible inside equipment) >10⁵ 500V d.c. 2kV (50Hz for 1 minute) 20ºC to +70ºC Protection Classiication IP66 EN60529: 1992+A2: Nm (2lb/in) Polybutene UL94HB rated Nylon 6 UL94V-0 rated PVC Nitrile Brass, Nickel Plated Stainless Steel (Black version only) Clear - no suix, /BK - Black Fuseholders 204

16 Accessories Insualtion Boots Provide Insulation against Shock on Rear of Fuseholder PVC UL94V-0 rated lame retardant material PNo PNo PNo Insualtion Cover Provide Insulation from Live Parts on Fuseholder Clear Polycarbonate PNo Adaptor Adaptor to Convert Fixing Holes Maintains Anti-Rotation Glass Filled Nylon PNo Accessories P.No (Boot) P.No (Boot) P.No (Boot) P.No (Cover) Max. Working Voltage: Flash Tested to: Material: P.No (Adaptor Washer) Material: For Use With: FX0296, FX0296/1, FX0296/S FX0354, FX0354/S, FX0357, FX0359, FX0454, FX0454/S, FX0455, FX0455/S, FX0460, FX0458, FX0367, FX0369, FX0462, FX0463 FX0415, FX0415/S, FX0416, FX0416/S FX0267, FX V a.c. 2kV a.c. P.Nos. 9820, 11327, 12932: PVC - UL94V-0 P.No : Polycarbonate Adapts D ixing to anti-rotation Key Fixing FX0455, FX0455/S Glass Filled Nylon 205 Fuseholders