BAR DISPENSERS (Bar Guns)

Size: px

Start display at page:

Download "BAR DISPENSERS (Bar Guns)"

Collin Henry
5 years ago
Views:

1 BAR DISPENSERS (Bar Guns) The Schroeder America Bar Gun dispenses Post-mix, Pre-mix and Juice products and comes in both flow control and mechanical models. Tailor your Bar Gun handle through color, plate configuration and customized button graphics. Model 950

2 FEATURES FEATURES ETL Sanitation Listed - Conforms to NSF 18 Fast flow rates. Flow Control models meet all Pepsi Cola industry standards for ratio, (brix,) control. No color or taste carry-over from nozzle. Nozzle removes easily with no tools for cleaning & sanitizing. Never becomes stuck to inner nozzle. Will dispense high yield concentrate syrups. Will dispense pungent syrups with no flavor migration to other flavors. 90º turn positive shut-offs on base units. Conventional fittings for 1/4 and 3/8 inlet tubing. Special off-set fittings not required. Every flow control module is 100% tested to and certified to meet Pepsi Cola industry standards for ratio control. Double o-rings help prevent leaks. Lower life cost. Easier, less expensive maintenance and service. Easy removal from bar with no tools. Holster unit removable with no tools for easy cleaning. Large drain tube from holster prevents backup. (1/2 ID) Holster is a major improvement over prior design. Helps prevent nozzle from contamination. 2

3 Dispenser Model UNDERSTANDING MODEL PART NUMBERS TO CUSTOMIZE YOUR POST-MIX BAR DISPENSER (BAR GUN) Total Number Buttons Non-Carbonated Flavors Buttons Carbonated Flavors Buttons Pre-Mix Buttons Pepsi Cola Flow Control or Mechanical Sheath Length Product Button Configuration XX X X X XX - XX - XXX No. Description 2 General Beverage 3 Pepsi Dispenser Model Total Number Buttons No. Description 01 All Flow Control 02 All Mechanical 03 Soda/Water:Flow Control All Carb Syrups: Flow Control All Non-Carb Syrups: Orifice Control 04 through 99 To Be Specified By SA Engineering Non-Carbonated Flavors Buttons Carbonated Flavors Buttons EXAMPLE: Pre-Mix Buttons Pepsi Cola Flow Control or Mechanical Sheath Length See Attached Pages or Website Product Button Configuration UNDERSTANDING PART NUMBERS SERIAL NUMBER EXAMPLE: Day Month Year Quantity PBD

4 UNDERSTANDING PART NUMBERS No. UNDERSTANDING MODEL PART NUMBERS TO CUSTOMIZE YOUR JUICE BAR DISPENSER (BAR GUN) Dispenser Model Total Number Buttons Pepsi Cola Flow Control or Mechanical Sheath Length Product Button Configuration JXX XX - XX - XXX Description 2 General Beverage 3 Pepsi Dispenser Model No. Description 01 All Flow Control 02 All Mechanical 03 Water:Flow Control All Syrups: Orifice Control 04 through 99 To Be Specified By SA Engineering Total Number Buttons EXAMPLE: Pepsi Cola Flow Control or Mechanical Sheath Length Product Button Configuration J See Attached Pages or Website SERIAL NUMBER EXAMPLE: Day Month Year Quantity PBD

5 LINE CONFIGURATION S1 Energy END OF HANDLE S1 S3 UP SODA / WATER S S2 SODA/WATER S3 INLET END S2 S P.N P.N Button S1 S5 S7 WATER P.N P.N Button UP SODA S1 S3 S4 S2 WATER END OF HANDLE SODA WATER INLET END S1 S3 SODA WATER S4 S2 S1 S3 SODA WATER S4 S2 S1 S2 P.N P.N P.N SODA S6 S3 S4 S2 END OF HANDLE S3 S5 UP SODA S4 S S8 P.N S1 S3 S2 S LINE CONFIGURATION WATER S7 S8 INLET END 12 Button 14 Button S7 UP SODA S1 S3 S4 S2 S1 S3 S4 S2 S9 S5 WATER S S7 S5 S1 S3 SODA WATER S4 S2 S6 S8 P.N S8 P.N P.N S9 S10 S11 END OF HANDLE END OF HANDLE S7 S5 UP SODA WATER S S10 S12 S S1 S2 SODA S3 S4 S5 S6 S7 S8 WATER S9 S10 INLET SIDE P.N P.N S1 S2 SODA S3 S4 S5 S6 S7 S8 S9 S10 WATER S11 S12 INLET SIDE S11 S9 S7 S5 S1 S3 SODA WATER S4 S2 S S8 S10 S12 S11 S9 S7 S5 S1 S3 SODA WATER S4 S2 S S8 S10 S12 P.N P.N

6 DETERMINING SHEATH LENGTH DETERMINING SHEATH LENGTH Sheath length is measured from the heal of the manifold to the heal of the handle. Lengths are available in 30, 48, 56, 72, and 84 with 30 as the standard. Custom lengths are also available. JUICE AND ENERGY BUTTON PLATE CONFIGURATION 1HL 950-J06-6 Button 1HL 950-J08-8 Button #H Butterfly Plate Assy Part Number 1HL HR HL HR H# H# Sheath Length 950-J10-10 Button Button No. Sheath Length 30 Standard J12-12 Button Button 1HR 1HL 1HR 1HL = Carbonated Positions = Non-Carbonated Positions #H = See Chart on Page 6 for Part Number = Secondary Water Metering Screw Affects These Positions = Requires Soda/Water Button Foot (P.N / ) Extensions Into Bottom Of Button Where Symbol Appears. 6

7 8 AND 10 BUTTON PLATE CONFIGURATIONS Button Carbonated 0 Button Non-Carbonated 4HL & Button Carbonated 3 Button Non-Carbonated 1HL 4HR Button Carbonated 6 Button Non-Carbonated 1HR 1HL Button Carbonated 1 Button Non-Carbonated 4HL Button Carbonated 4 Button Non-Carbonated Button Carbonated 7 Button Non-Carbonated 1HR 1HR & Button Carbonated 2 Button Non-Carbonated 1HL Button Carbonated 5 Button Non-Carbonated 1HL Button Carbonated 8 Button Non-Carbonated 1HR BUTTERFLY PLATE CONFIGURATIONS 4HL 4HR 4HL = Carbonated Positions = Non-Carbonated Positions #H = See Chart on Page 6 for Part Number = Secondary Water Metering Screw Affects These Positions = Requires Soda/Water Button Foot (P.N / ) Extensions Into Bottom Of Button Where Symbol Appears. 7

8 12 AND 14 BUTTON PLATE CONFIGURATIONS BUTTERFLY PLATE CONFIGURATIONS Button Carbonated 2 Button Non-Carbonated 4H#3 1HL Button Carbonated 5 Button Non-Carbonated 4H#4 1HR Button Carbonated 3 Button Non-Carbonated Button Carbonated 6 Button Non-Carbonated 4H#3 1HL Button Carbonated 4 Button Non-Carbonated Button Carbonated 7 Button Non-Carbonated 1HR 4H#4 = Carbonated Positions = Non-Carbonated Positions #H = See Chart on Page 6 for Part Number = Secondary Water Metering Screw Affects These Positions = Requires Soda/Water Button Foot (P.N / ) Extensions Into Bottom Of Button Where Symbol Appears. 8

9 12 AND 14 BUTTON PLATE CONFIGURATIONS Button Carbonated 8 Button Non-Carbonated 1HR 4H# Button Carbonated 6 Button Non-Carbonated 1HL 4H# Button Carbonated 4 Button Non-Carbonated 4H#3 4H# Button Carbonated 7 Button Non-Carbonated 4H# Button Carbonated 5 Button Non-Carbonated 4H# Button Carbonated 8 Button Non-Carbonated 4H#4 4H#3 BUTTERFLY PLATE CONFIGURATIONS = Carbonated Positions = Non-Carbonated Positions #H = See Chart on Page 6 for Part Number = Secondary Water Metering Screw Affects These Positions = Requires Soda/Water Button Foot (P.N / ) Extensions Into Bottom Of Button Where Symbol Appears. 9

10 BUTTONS BUTTONS CUSTOM BUTTONS CAN BE CREATED FOR AN ADDITIONAL COST 10

11 BUTTONS BUTTONS CUSTOM BUTTONS CAN BE CREATED FOR AN ADDITIONAL COST 11

12 PRODUCT LABELS FOR FLOW CONTROL MODULES PRODUCT LABELS FOR FLOW CONTROL 12

13 BUTTON PLATE CONFIGURATIONS BUTTON PLATE CONFIGURATIONS PLEASE SEE WEBSITE FOR UP TO DATE PLATE CONFIGURATIONS 13

14 ACCESSORIES ACCESSORIES DRAIN TUBING P.N SANITARY HOLSTER & DRAIN P.N Black Holster Kit, With Mounting Screws SHUT OFF TOOL P.N FLOW CONTROL TOOL P.N O-RING TOOL P.N SEPARATOR P.N EXTENSION, ACTUATOR P.N ACTUATOR, SINGLE. PREMIX P.N

15 ACCESSORIES 1/4 BARB, STAINLESS STEEL FITTING P.N /8 BARB, STAINLESS STEEL FITTING P.N ACCESSORIES 3/8 90 DEG BARB, STAINLESS STEEL FITTING P.N /8 45 DEG BARB, STAINLESS STEEL FITTING P.N /4 90 DEG BARB, STAINLESS STEEL FITTING P.N /4 45 DEG BARB, STAINLESS STEEL FITTING P.N KIT, MECHANICAL CONTROL P.N SPLITTER ASSEMBLY, WATER P.N

16 ACCESSORIES EXPLODED VIEWS 16

17 ACCESSORIES ACCESSORIES PARTS LIST ITEM SCHROEDER PN DESCRIPTION BRACKET, MOUNTING, BARGUN, BLACK HOLSTER, BARGUN, BLACK DRIP TRAY, BARGUN, BLACK O-RING, SCREW, 8-32 X..750, PH, FHD, SS GROMMET, PISTON, WASHER, NYLON INSERT, ULTR IV HANDLE, TOOL GROMMET, SLEEVE, SCREW, 8-32 X 1.000, SL, TH, SS RETAINER, CLIP, FITTING SPLITTER SUB-ASSY, WATER, BARGUN O-RING, PLUG, ADJUST, MC, GREEN O-RING, O-RING, CONTROL, ORIFICE O-RING, FITTING,.375 O-RING X.250 BARB FITTING,.375 O-RING X.375 BARB FITTING, 90 DEG,.375 O-RING X.375 BARB FITTING, 90 DEG,.375 O-RING X.250 BARB FITTING, 45 DEG,.375 O-RING X.375 BARB FITTING, 45 DEG,.375 O-RING X.250 BARB 26 NOT USED INSERT, HOLSTER, SHORT EXPLODED VIEWS ACCESSORIES ASSEMBLED PARTS LIST DRAIN TUBE 1/2 ID X 3/4 OD KIT, HOLSTER ASSY, W/SCREWS/BG, BLK SHUT-OFF TOOL FLOW CONTROL TOOL O-RING TOOL SEPARATOR, BARGUN EXTENSION, ACTUATOR, WATER/SODA ACTUATOR, SINGLE, PREMIX FITTING ASSY,.375 O-RING X.250 BARB W/O-RINGS FITTING ASSY,.375 O-RING X.375 BARB W/O-RINGS FTG ASSY, 90 DEG,.375 O-RING X.375 BARB W/O-RINGS FTG ASSY, 45 DEG,.375 O-RING X.375 BARB W/O-RINGS FTG ASSY, 90 DEG,.375 O-RING X.250 BARB W/O-RINGS FTG ASSY, 45 DEG,.375 O-RING X.250 BARB W/O-RINGS KIT, MECHANICAL ORIFICE CONTROL SPLITTER ASSY, WATER, BARGUN W/O-RINGS 17

18 HANDLE ASSEMBLY EXPLODED VIEWS 18

19 HANDLE ASSEMBLY BARGUN HANDLE PARTS LIST ITEM SCHROEDER PN DESCRIPTION SUB-ASSY, BARGUN HANDLE,3/5B, BLUE SUB-ASSY, BARGUN HANDLE,10B, BLUE SUB-ASSY, BARGUN HANDLE,12B, BLUE SUB-ASSY, BARGUN HANDLE,14B, BLUE SEAL, HANDLE BODY, NOZZLE, BLUE RETAINER, BUTTERFLY SCREW, 6-32X.375,100 DEG FHP SCREW, 6-32X.500, SL, FHD, SS PLATE, BUTTON, 3B, BLUE PLATE, BUTTON, 5B, BLUE PLATE, BUTTON, 6B JUICE, BLUE PLATE, BUTTON, 8B, BLUE PLATE, BUTTON, 8B JUICE, BLUE PLATE, BUTTON, 10B, BLUE PLATE, BUTTON, 12B, BLUE PLATE, BUTTON, 14B, BLUE ACTUATOR, WATER/SODA EXTENSION, ACTUATOR, WATER/SODA ACTUATOR, SINGLE ACTUATOR, SINGLE, PREMIX BUTTON, WATER BUTTON, SODA PLATE SUBASSY, PLUNGER, RETAINER, 6B, BLUE PLATE SUBASSY, PLUNGER, RETAINER, 10B, BLUE PLATE SUBASSY, PLUNGER, RETAINER, 12B, BLUE PLATE SUBASSY, PLUNGER, RETAINER, 14B, BLUE PLATE ASSY, PLUNGER, RETAINER, 6B, BLUE (W/ O-RINGS) PLATE ASSY, PLUNGER, RETAINER, 10B, BLUE (W/ O-RINGS) PLATE ASSY, PLUNGER, RETAINER, 12B, BLUE (W/ O-RINGS) PLATE ASSY, PLUNGER, RETAINER, 14B, BLUE (W/ O-RINGS) O-RING, SPRING, STEM STEM/PLUNGER ASSY, 1 PC O-RING, SCREW, WATER, BRIX SCREW ASSY, WATER BRIX O-RING, SHEATH, 3/5/6, SHEATH, 3/5/6, SHEATH, 8/10, SHEATH, 8/10, SHEATH, 8/10, SHEATH, 8/10, SHEATH, 12/14, SHEATH, 12/14, SHEATH, 12/14, SHEATH, 12/14, HEEL ASSY, HANDLE,6B, BLUE HEEL ASSY, HANDLE,10B, BLUE HEEL ASSY, HANDLE,12/14B, BLUE SCREW, 6-32X1.125, SL, FHD, SS (3/5/10B) SCREW, 6-32X1.562, SL, FHD, SS (12/14B) POST, RETAINER PLATE, 3/5/6/10B PLATE, 12/14B FERRULE, TUBE FITTING, INLET, HANDLE O-RING, FITTING ASSY, INLET, HANDLE (W/ O-RINGS) LABEL, PLATE, BOTTOM LABEL,DOMED,BARGUN,PEPSI SCREW,6-32X.500,PH,PHD,SS LABEL, TWIST-ON/OFF, BARGUN EXPLODED VIEWS 19

20 MANIFOLD ASSEMBLY EXPLODED VIEWS SEE CATALOG PAGE 6 20

21 MANIFOLD ASSEMBLY BARGUN MANIFOLD PARTS LIST ITEM SCHROEDER PN DESCRIPTION BASE, MOUNTING, 6B, BLACK BASE, MOUNTING, 10B, BLACK BASE, MOUNTING, 12/14B, BLACK HOUSING, TUBING, 6B, BLACK HOUSING, TUBING, 10B, BLACK HOUSING, TUBING, 12/14B, BLACK COVER, HOUSING, TUBING,6B, BLACK COVER, HOUSING, TUBING,10B, BLACK COVER, HOUSING, TUBING,12/14B, BLACK SCREW, SEPARATOR LABEL, SERIAL NUMBER, BARGUN FERRULE, FITTING, MANIFOLD FITTING, INLET, GUN O-RING, FITTING ASSY, INLET, GUN (W/ O-RINGS) SPRING, PIN, LATCH E-RING, SCREW, 8-16x.875, PLASTITE, PHSL, PHD SCREW, 8-16x.375, PLASTITE, PHSL, PHD PIN, LATCH LABEL, BUTTON LAYOUT,5B LABEL, BUTTON LAYOUT,6B LABEL, BUTTON LAYOUT,10B LABEL, BUTTON LAYOUT,12B LABEL, BUTTON LAYOUT,14B LABEL, HOUSING LAYOUT, 5/6B LABEL, HOUSING LAYOUT, 10B LABEL, HOUSING LAYOUT, 12B LABEL, HOUSING LAYOUT, 14B LABEL, HANDLE LAYOUT, 5B LABEL, HANDLE LAYOUT, 6B LABEL, HANDLE LAYOUT, 10B LABEL, HANDLE LAYOUT, 12B LABEL, HANDLE LAYOUT, 14B TUBE,.165X.023 WALL, SODA - SPECIFY LENGTH TUBE,.165X.023 WALL, WATER - SPECIFY LENGTH TUBE,.165X.023 WALL, S1 - SPECIFY LENGTH TUBE,.165X.023 WALL, S2 - SPECIFY LENGTH TUBE,.165X.023 WALL, S3 - SPECIFY LENGTH TUBE,.165X.023 WALL, S4 - SPECIFY LENGTH TUBE,.165X.023 WALL, S5 - SPECIFY LENGTH TUBE,.165X.023 WALL, S6 - SPECIFY LENGTH TUBE,.165X.023 WALL, S7 - SPECIFY LENGTH TUBE,.165X.023 WALL, S8 - SPECIFY LENGTH TUBE,.165X.023 WALL, S9 - SPECIFY LENGTH TUBE,.165X.023 WALL, S10 - SPECIFY LENGTH TUBE,.165X.023 WALL, S11 - SPECIFY LENGTH TUBE,.165X.023 WALL, S12 - SPECIFY LENGTH SCREW, 1/4-20, RETAINER, BARGUN EXPLODED VIEWS 21

22 FLOW CONTROL MODULE ASSEMBLY EXPLODED VIEWS SEE CATALOG PAGE 12 22

23 FLOW CONTROL MODULE ASSEMBLY BARGUN FLOW CONTROL MODULE PARTS LIST ITEM SCHROEDER PN DESCRIPTION HOUSING, VALVES, 6B, BLACK HOUSING, VALVES, 10B, BLACK HOUSING, VALVES, 12/14B, BLACK SCREW, 8-16x.375, PLASTITE, PHSL, PHD LABEL, SERIAL NUMBER, BARGUN ASSY, VALVE, BACKBLOCK, BLACK BODY, BACKBLOCK, BLACK O-RING, STEM, BODY STEM ASSY, SHUTOFF (W/O-RING) RETAINER, STEM WASHER, STEM O-RING, FITTING,.375 O-RING X.250 BARB FITTING,.375 O-RING X.375 BARB FITTING ASSY,.375 O-RING X.250 BARB (W/O-RING) FITTING ASSY,.375 O-RING X.375 BARB (W/O-RING) BODY, FLOW CONTROL, 1, NATURAL BODY, FLOW CONTROL, 1, BLACK ASSY, VALVE, FLOW CTRL, SODA 1, BLK BONNET SUB-ASSY,FLOW CONTROL,SYRUP 1, BLACK BODY, FLOW CONTROL, 2, NATURAL BODY, FLOW CONTROL, 2, BLACK ASSY, VALVE, FLOW CTRL, SODA 2, BLK BONNET SUB-ASSY,FLOW CONTROL,SYRUP 2, BLACK O-RING, SLEEVE, WATER/SYRUP PISTON, SYRUP PISTON, WATER SPRING, SYRUP SPRING, SODA O-RING, PLUG, ADJUST,FC, RED PLUG ADJUSTER SUB-ASSY, RED (W/ O-RING) BONNET, BLACK BONNET SUBASSY, BLACK (W/ O-RING) RETAINER, BONNET SCREW, 8-16x.500, PLASTITE, SL, HHD CAP, BONNET RETAINER, CLIP, FITTING PLUG ADJUST,MC, GREEN PLUG ADJUSTER SUB-ASSY, GREEN (W/ O-RING) O-RING, CONTROL, ORIFICE CONTROL ORIFICE SUBASSY (W/O-RING) EXPLODED VIEWS 23

24 MECHANICAL MODULE ASSEMBLY EXPLODED VIEWS 24

25 MECHANICAL MODULE ASSEMBLY BARGUN MECHANICAL CONTROLS MODULE PARTS LIST ITEM SCHROEDER PN DESCRIPTION HOUSING,MOUNTING,VALVE,BOTTLER,6B, BLACK HOUSING,MOUNTING,VALVE,BOTTLER,10B, BLACK HOUSING,MOUNTING,VALVE,BOTTLER,12/14B, BLACK SCREW, 8-16x.375, PLASTITE, PHSL, PHD BODY,VALVE,BOTTLER, BLACK RETAINER, CLIP, FITTING O-RING, STEM, BODY STEM ASSY, SHUT OFF (W/ O-RING) RETAINER, STEM WASHER, STEM O-RING, STEM,BODY,VALVE,METER STEM ASSY, METER (W/ O-RING) LABEL, SERIAL NUMBER, BARGUN FITTING,.375 O-RING X.250 BARB FITTING,.375 O-RING X.375 BARB O-RING, FITTING ASSY,.375 O-RING X.250 BARB (W/ O-RINGS) FITTING ASSY,.375 O-RING X.375 BARB (W/ O-RINGS) SCREW, 6-19x.375, PLASTITE, PH, PHD ASSY, VALVE, BOTTLER, BARGUN, BLACK EXPLODED VIEWS 25

26 CORPORATE OFFICE 5620 Business Park San Antonio, Texas T F TF Schroeder America is a trademark of Schroeder Industries, Inc. Pepsi is a registered trademark of The Pepsi Company. Patents Pending, US & Foreign. Schroeder America is responsible for al technical claims made in this document. PN: Rev. 1/17

BAR DISPENSERS (Bar Guns) Postmix, Premix, and Juice Products Flow Control and Mechanical Models. Model 950

BAR DISPENSERS (Bar Guns) Postmix, Premix, and Juice Products Flow Control and Mechanical Models. Model 950 FEATURES FEATURES ETL Sanitation Listed - Conforms to NSF 18 Fast flow rates. Flow Control models