Replacement Parts Manual
|
|
- Eileen McBride
- 6 years ago
- Views:
Transcription
1 Replacement Parts Manual with Illustrations FREEDOM 360 º Series Mix Transfer System Models RMT and RMT-S /00 H. C. Duke & Son, Inc. P/N June 2000 Printed in U.S.A.
2 Replacement Parts Manual Table of Contents You must have the serial number of the RMT when ordering parts parts may differ with a particular serial number of the same model. Parts are listed using terminology that best fits the function of the part. The illustrations in this section will help you to find the correct part number and description. The alphabetized parts list can be used as verification of part numbers used by serial number. All parts listed in the manual should be ordered through: H. C. Duke & Son, Inc th Avenue East Moline, Illinois Phone: (309) or (800) FAX: (309) QUALITY PARTS PROTECT YOUR EQUIPMENT ILLUSTRATIONS Figure 1 RMT Hose Assembly... 2 Figure 2 RMT System Assembly... 4 Figure 3 Pressure Switch Assembly... 6 Figure 4 Wiring Diagram RMT System... 8 Figure 5 Wiring Diagram RMT Motor... 9 OTHER Accessories Alphabetical Parts List Keep your freezer in excellent condition. Always contact H. C. Duke & Son, Inc. or International Dairy Queen for replacement parts and maintenance scheduling.
3 Figure 1 RMT Hose Assembly (sheet 1 of 2)
4 Figure 1 RMT Hose Assembly (sheet 2 of 2) Item Part No. Description Hose - Transfer Red (Red Line) Diaphragm - Rubber Housing - Assy. Diaphragm (Duke freezers) Housing - Assy. Diaphragm (Stoelting freezers) Clamp - Hose Ratchet 3/4 7/8 (Duke freezers) Clamp - Assy. 5/8 hose (Stoelting freezers) O-Ring Piston - Relief Valve (Duke Soft Serve) * Piston - Relief Valve (Duke Shake and Stoelting freezers) Spring - SS Relief Valve (Duke Soft Serve) * Spring - Pressure Relief, Blue (Duke Shake and Stoelting freezers) Port - Drain Relief Valve Clamp - Hose 1/2-inch Hose - Pressure Relief Clip - Hairpin O-Ring Hose - Assy. Mix Braided Tubing ID X.850 OD PVC Duckbill - Inlet RM MTS Inlet - Assy. Tee Tube - Air 18 Meter - Air (Order by Meter Number) Clamp - Hose Ratchet * Kit-Relief Spring Replacement Shake
5 Figure 2 RMT System Assembly (sheet 1 of 2) Note: Item 48 and 49 fuse holder and fuse may be mounted on the relay box (Item 38) on some models
6 Figure 2 RMT System Assembly (sheet 2 of 2) Item Part No. Description Cover - Assy. Motor 1A Screw-TRPM #10-24 x 3/8 SST Shoe - Roller Kit - Roller Knob - Hand Clamp - Shoe Swing Retainer - Air Line Nameplate - Switch ON/OFF 7A Shield - Switch Ring - Split Pin - Clevis Clamp - Hose 3/4 7/8 (Duke freezers) 10A Clamp - Assy. Soft Hose 5/8 (Stoelting freezers) Housing - Assy. Diaphragm (Duke freezers) 11A Housing - Assy. Diaphragm (Stoelting freezers) O-Ring Piston - Relief Valve (Duke soft serve) * Piston - Releif Valve (Duke shake and Stoelting soft serve) Clamp - Hose 1/2-inch Hose - Pressure Relief Port - Drain Relief Valve Spring - SS Relief Valve (Duke soft serve) 17A * Spring - Pressure Relief, Blue (Duke shake & Stoelting freezers) Clip - Hairpin O-Ring Hose - Assy. Mix Braided Diaphragm - Rubber 22 Meter - Air (Order by Meter Number) Tube - Air Ring - Assy. Lock Inlet - Assy. Tee Duckbill - Inlet RM MTS Tubing -.600ID x.850od PVC (specify feet) Clamp - Hose Support - Roller Bearing Hose - Transfer Red (Red Line) Cover - Assy. RMT O-Ring - Shoe O-Ring - Nonfood (Swing Clamp) Switch - Toggle SPST Strip - Terminal Item Part No. Description Bushing - Strain Relief Cord - w/plug 6 ft Relay - Flange Base 115V Kit - Gearmotor Replacement 39A Kit-Gasket & Seal Gearmotor Seal - Output Shaft Oil - Special Gear Lube Seal - Oil Gasket - Gearmo tor Shield - Drip Washer - Curved Spring Kit - RMT Cover Switch Base - Assy. Frame Lanyard - Wire Sleeve - Cable Stop 3/ Sensor - Resistance Knob - Cover RMT Fuseholder - Panel Fuse - Slo Blow 3A * Kit-Relief Spring Replacement Not Shown: Kit-RMT Gap Set Arm-Shoe Pivot Spacer-Swing Arm
7 Figure 3 Pressure Switch Assembly (sheet 1 of 2)
8 Figure 3 Pressure Switch Assembly (sheet 2 of 2) Item Part No. Description Port - Drain Relief Valve Spring - SS Relief Valve (Duke Soft serve) (RMT only) 2A Spring - Pressure Relief, Blue (Duke shake and Stoelting freezers) O-Ring Piston - Relief Valve (Duke soft serve) Piston-Relief Valve (Duke shake and Stoelting freezers) Housing - Assy. Diaphragm (Duke freezers) 5A Housing - Assy. Diaphragm (Stoelting freezers) Diaphragm - Rubber Ring - Split #7 SST Pin - Clevis Plate - Spacer Bracket - Assy. Base Washer - Lock #10 ZN Nut - Hex #10-24 ZN Actuator - Switch Stop - Maximum Pressure Nut - Speed 5/16 SPR STL Button - Pressure Switch Spring - Compression SS (RMT only) 17A Spring - Compression Shake (RMT-S only) Washer - Flat #10 ZN Nut - EL Stop #10-24 ZN Stud - 2-7/16 x #10-24 THD SST (Long) Screw - SKHC - #6 32 x Washer - Flat #6 Brass Switch - Snap Button Insulator - Switch Screw - RDHM #8 32 x 3/8 ZN Nut - Speed #6-32 BKOX Bracket - Switch Washer - Ext. Tooth #6 ZN Washer - Flat #8 ZN Stud /32 x #10-24 THD SST Stop - Pivot Screw - TRPM #10 24 x 5/8 SST Washer - Int Tooth #10 SST O-Ring Clip - Hairpin Washer - 5/16 Flat ZN Washer - Flat #10 ZN Plate - Leak Sensor Screw - TRPM #10-24 x 3/8 SST Washer - 1/2 x.196 x 1/ Washer - Shoulder #10 Nylon Washer - Lock #8 ZN
9 Figure 4 Wiring Diagram RMT System
10 Figure 5 Wiring Diagram RMT Motor
11 Accessories Part No. Description Bottle - Wash 500 ML Brush - 7/16-inch diameter w/12-inch handle Brush - 9/16-inch diameter w/30-inch handle Brush - 5/8-inch diameter w/6 foot wire Brush - 1/4-inch diameter w/6 1/2-inch handle Brush - 1-inch diameter w/12-inch handle Brush - 3/4-inch diameter w/36 inch handle Gauge Assembly - CMT Pressure Gearmotor Replacement Kit RMT-S Spare Parts Kit (Duke shake freezer) RMT Spare Parts Kit (Duke soft serve freezer) RMT Spare Parts Kit (Stoelting freezers) Sanitizer - Stera Sheen (per case) A Sanitizer - Stera Sheen (per jar) Scale - Overrun Shelf RMT Kit Tee - Plastic Hose Connection Tubing ID x.975 OD (mix line - heavy duty) Tubing ID x.850 OD (mix line - standard)
12 Alphabetized Parts List IMPORTANT: All parts shown are for standard models designed for 115V/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER QTY (FROM TO) Actuator - Switch E961 - Base Assembly - Frame E961 - K Also need Plate-Spacer E961 - K Base - Assy. Frame K Bracket - Assy. Base E961 - Bracket - Switch Adjustment (NLA use ) E961 - Bracket - Switch (NLA use ) E961 - Bracket - Switch Bushing - Strain Relief E961 - Button - Pressure Switch E961 - Clamp - Assy. Soft Hose 5/ E961 - Clamp - Hose Ratchet 1/2-inch E961 - Clamp - Hose 3/4 7/ E961 - Clamp - Hose Ratchet 10/32-21/ E961 - Clamp - Shoe Swing E961 - Clip - Hairpin E961 - Cord - w/plug 6 ft E961 - Cover - Assy. Motor E961 - Cover - Assy. RMT E961 - Decal - Warning - Pressurized System E961 - Decal - Warning - Rotating Parts E961 - Diaphragm - Rubber E961 - Duckbill - Inlet RM MTS E961 - Fuseholder - Panel F * As Required **Specify Length in Feet NLA No Longer Available /00 11
13 Alphabetized Parts List IMPORTANT: All parts shown are for standard models designed for 115V/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER QTY (FROM TO) Fuse - Slo Blow 3.0 Amp F Gasket - Gearmotor E961 - Gearmotor - Kit Replacement E961 - Gearmotor - Assy. RMT Field 1 E961 - Gauge - Shaft Alignment RMT E961 - Washer - Curved Spring E961 - Sealant - Alum Silastic 3 oz tube E961 - Hose - Assy. Mix Braided E961 - Hose - Pressure Relief * E961 - Hose - Transfer Red (Red Line) E961 - Housing - Assy. Diaphragm E961 - Housing Assy - Diaphragm (Stoelting freezers) E961 - Inlet - Assy. Tee E961 - Insulator - Switch E961 - Kit - RMT Cover Switch E961 - Kit - RMT Spare Parts E961 - Kit - RMT-S Spare Parts E961 - Kit - Roller Complete E961 - Kit - Shelf RMT E961 - Knob - Cover RMT E961 - Knob - Hand E961 - Knob, Lanyard - Wire E961 - * As Required **Specify Length in Feet NLA No Longer Available /00
14 Alphabetized Parts List IMPORTANT: All parts shown are for standard models designed for 115V/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER QTY (FROM TO) Seal - Oil E961 - Seal - Output Shaft (Gearmotor) E961 - Screw - RDHM #8 32 x 3/8 ZN * E961 - Screw - SKHC - #6 32 x 1 BKOX * E961 - Screw - TRPM #10-24 x 3/8 SST (Motor Cover) * E961 - Sensor - Resistance E961 - Shield - Drip E961 - Shield - Switch E961 - Shoe - Roller E961 - Sleeve - Cable Stop (Retainer) E961 - Spring - Compression Soft Serve E961 - Spring - Compresson Shake E961 - Spring - SS Relief VLV (Duke soft serve) E961 - Spring - Pressure Relief VLV Blue (Duke shake and Stoelting freezers) E961 - Stop - Maximum Pressure E961 - Stop - Pivot E961 - Strip - Terminal E961 - Stud - #10-24 x 2-7/16 SST (Long) E961 - Support - Roller BRG E961 - Switch - Cover Kit * E961 - Switch - Snap Button E961 - Switch - Toggle SPST * E961 - Tube - Air E961 - Tubing ID X.850 OD PVC ** E961 - Tubing ID X.725 OD PVC ** E961 - * As Required **Specify Length in Feet NLA No Longer Available /00
15 Alphabetized Parts List IMPORTANT: All parts shown are for standard models designed for 115V/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER QTY (FROM TO) Washer - Curved Spring * E961 - Washer - Flat #10 ZN * E961 - Washer - Flat #6 - Brass * E961 - Washer - Flat #8 ZN * E961 - Washer - Lock #10 ZN * E961 - Washer - Lock #8 ZN * E961 - * As Required **Specify Length in Feet NLA No Longer Available /00 15
16 Alphabetized Parts List IMPORTANT: All parts shown are for standard models designed for 115V/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER QTY (FROM TO) Meter - Air Specify Size Nameplate - Switch ON/OFF E961 - Nut - EL Stop #10-24 ZN E961 - Nut - EL Stop #10-32 ZN E961 - Nut - Hex #10-24 ZN E961 - Nut - Hex #8-32 ZN E961 - Nut - Speed 5/16 SPR STL E961 - Oil - Special Gear Lube oz. E961 - O-Ring E961 - O-Ring E961 - O-Ring - Nonfood (Swing clamp) E961 - O-Ring - Shoe E961 - Pin - Clevis E961 - Piston - Relief Valve (Duke soft serve) E961 - Piston - Relief Valve (Duke shake & Stoelting freezers) E961 - Plate - Spacer E961 - K Plate - Spacer K Plate - Threaded E961 - Port - Drain Relief Valve E961 - Relay - Flange Base 115V E961 - Retainer - Air Line E961 - Ring - Assy. Lock E961 - Ring - Split #7 SST E961 - Roller - Kit - Complete E961 - * As Required **Specify Length in Feet NLA No Longer Available /00 13
REPLACEMENT PARTS MANUAL with Illustrations
H. C. Duke & Son, Inc. P/N 184930-01 January 2000 Printed in U.S.A. REPLACEMENT PARTS MANUAL with Illustrations MR. MISTY Model 185 184930-01 01/00 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
More informationrefrigeration SHAKE #15-77CMT ICE CREAM MACHINE ELECTRO FREEZE 21 SHAKE DISPENSE HEAD ASSEMBLY SHAKE BEATER SEAL ASSEMBLY 9
SHAKE DISPENSE HEAD refrigeration SHAKE #-CMT 0 SHAKE BEATER SEAL EF Head Dispense, Shake side EF Bushing, Beater Bearing EF O-Ring Head EF O-Ring Plunger, Lower, pkg of EF0 O-Ring Plunger, Upper, pkg
More informationKEY PART # DESCRIPTION KEY PART # DESCRIPTION
SINGLE HEAD BEATER SHAFT EF0 Head Dispense w/actuator EF Nozzle, Serrated EF Knob, Hand EF00 Handle Assembly Dispense w/knob EF Knob Ball, /"-, THD Black EF Pin Handle EF Plug for O-Ring, pkg of EF Plug,
More informationKEY PART # DESCRIPTION KEY PART # DESCRIPTION
SOFT SERVE #0T-CMT B A C D BEATER SHAFT ASSEMBLY HEAD ASSEMBLY F E I F G BEATER SHAFT ASSEMBLY OLD STYLE H 0 A EF0 Beater Shaft B EF0 Front Blade Scraper C EF Rear Blade Scraper D EF Shaft Seal Assembly
More informationrefrigeration SHAKE #78RMT ELECTRO FREEZE SHAKE MACHINE BEATER SHAFT ASSEMBLY HEAD ASSEMBLY KEY PART # DESCRIPTION KEY PART # DESCRIPTION
C ETER SHFT HED EF0 Scraper lade EF eater Shaft C EF eater Shaft Seal ssembly EF0 Head Only EF0 eater earing ushing EF0 Head O-Ring EF0 Lower Plunger O-Ring, pkg of EF00 Upper Plunger O-Ring, pkg of EF
More informationKEY PART # DESCRIPTION KEY PART # DESCRIPTION
Having your serial # ready before ordering ElectroFreeze parts, when calling our sales staff, will ensure speed & accuracy. 9 0 HEAD ASSEMBLY BEATER SHAFT ASSEMBLY EF Beater Shaft EF90 Cylinder Bushing
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationElectronic Service Manuals
Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions
More informationPacemaker 17/20 PARTS LIST Advance MODELS ,
Pacemaker 17/20 PARTS LIST Advance MODELS 56168100, 56168500 56168505 * This parts list is for machines built after June 1991. Reference note on inside of front cover. 10/96 revised 10/00 Form Number 56042320
More informationLIFEMIST NT WATER DISTILLER
LIFEMIST NT WATER DISTILLER REPLACEMENT PARTS MANUAL AND WIRING SCHEMATIC FOR MODEL: NT, LM-AED-1 & LM-APK-1 PART # 500033 500035 500034 SERIES 0014 0002 0001 02/08/11 PAGE 1 097079-S14A 02/08/11 PAGE
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationHigh-Speed Matador 17/20
High-Speed Matador 17/20 PARTS LIST Advance MODELS 56172395, 56172400, 56172410 56172425 This parts list is for machines after serial number 279789 All models covered in this manual are OBSOLETE 10/89
More informationMODELS CMA-180/180TALL Including 480V MACHINES PARTS MANUAL Rev 2.08A
MODELS CMA-180/180TALL Including 480V MACHINES PARTS MANUAL Rev 2.08A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
More informationControl Panel Assembly Model : " Marathon 2000 (20 Gallon) - Series H
Control Panel Assembly Model :990 " Marathon 000 (0 Gallon) - Series H Page- 7 9 0 7 9 0 Number Description Qty Req. 077 NUT-FINISHED HEX #0- (ZP) 070 SWITCH ROCKER (9-) PLUG-HOLE (ZINC) / DIA 0 NUT-HEX.LOCK(KEPS)
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB WITH SIDEKICK CHEMICAL DISPENSOR WITHOUT SIDEKICK CHEMICAL DISPENSOR 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221
More informationTech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL C ELECTRIC HYDRAULIC PUMP
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
More informationMAIN FRAME 84-G PART # DESCRIPTION QTY /4-20 X 1 SHCS /4-20 X 1 1/4 SHCS /16-18 X 3/4
MAIN FRAME 84-G30-3699-02 PART # DESCRIPTION QTY 99-280-7006-05 1/4-20 X 1 SHCS 2 99-280-7006-06 1/4-20 X 1 1/4 SHCS 2 99-280-7007-04 5/16-18 X 3/4 FHS. 1 99-280-7012-01 NUT, NYLOC 10-24, CAD PLATE 1 99-280-7015-01
More informationMatador 17/20. revised 2/01 Form Number
Matador 17/20 PARTS LIST Advance MODELS 56172200, 56172205, 56172220 56172225, 56172208 This parts list is for machines after serial number 291095 All models covered in this manual are OBSOLETE revised
More informationReplacement Part Diagrams SG12 Series Surface Grinder
Replacement Part Diagrams SG Series Surface Grinder SG GrinderS FOrM GOMxxxxxxxx, VerSiOn.0, AUTHOriZATiOn: xxx, PAGe: Frame Assembly SG/E Surface Grinder SG GrinderS FOrM GOMxxxxxxxx, VerSiOn.0, AUTHOriZATiOn:
More informationDRAWING NUMBER: GK-191-P-200-2C
PARTS BREAK DOWN FOR A RIGID KAT LOWER HOUSING ASSEMBLY DRAWING NUMBER: GK-9-P-200-2C GK-7-005 KAT LOWER HOUSING 2 GK-7-02 WHEEL ADJUSTMENT SCREW 3 GK-0-062 3/4-6UNC HEX HEAD JAM NUT 4 GK-7-02 WHEEL ADJUSTMENT
More informationF479 HVE V PARTS LIST
F479 HVE 3000 115V PARTS LIST PARTS LIST 03-00105 18 SCREW 1/4 20 X.375 HWH NYLOC ZP 03-00179 1 GROMMET -.75 ID X 1.375 OD RUBBER 03-00208 4 RIVET 1/4 X 1/4 STL/STL ZP 8-4 03-00209 11 SCREW 1/4 20 X.50
More informationEUROPEAN REAR ENGINE RIDER SERIES 20
Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,
More informationRC-100. Parts Identification
RC-100 Rim Clamp Tire Changer For servicing motorcycle and ATV tire/wheel assemblies, also single piece automotive and most light truck tire/wheel assemblies s Identification READ these instructions before
More informationElectronic Service Manuals
Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions
More information136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck
136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck 136R616G190 Lawn Tractor FST-16 (1996) Page 2 of 27 42" Mowing Deck 3 97600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously
More informationAll-Purpose Matador 17/20
All-Purpose Matador 17/20 PARTS LIST Advance MODELS 56172500(17/115V) 56172510(17/100V), 56172600(20/115V) 56172505(17/230V/OBS) 56172605(20/230V/OBS) revised 5/01 00-2 TABLE OF CONTENTS 1 DESCRIPTION
More informationH.I.T Truck Tire Changer. Parts Identification
H.I.T. 6000 Truck Tire Changer READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference by supervisors
More informationAdvolution 2710 PARTS LIST MODELS , , /06 revised 5/09 FORM NO
PARTS LIST MODELS 56422000, 56422002, 56422184 3/06 revised 5/09 06-3 09-5 TABLE OF CONTENTS 1 DESCRIPTION PAGE Body System... 2-3 Chassis System... 4-5 Decal System... 6-7 Electrical System... 8-9 Pad
More informationVision 17B/BT. Section II Parts and Service Manual (78454B) CLARKE TECHNOLOGY Operator's Manual - Vision 17B/BT Page -23-
Vision 17B/BT Section II Parts and Service Manual (78454B) Operator's Manual - Vision 17B/BT Page -23- HOW TOO CORRECT PROBLEMS IN THE MACHINE PROBLEM CAUSE ACTION There isn't any solution flow. The solution
More informationREAR ENGINE RIDER 42 MOWER SERIES 22
Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9
More informationCATALOG OF REPLACEMENT PARTS W32/W32C/625A WRAP STATION ML-44103, ML ML-44105, ML ML-26243
CATALOG OF REPLACEMENT PARTS W32/W32C/625A WRAP STATION W32 W32C 625A HP ML-44103, ML-26320 ML-44105, ML-26331 ML-44069 ML-26243 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001
More informationREPLACEMENT PARTS MANUAL
PREC SION Water Systems REPLACEMENT PARTS MANUAL FOR MODEL: PWS 8-5(120VAC), PWS 8-5(240VAC),AED-1(120VAC),AED-1(240VAC),APK-2(120VAC) & APK-2(240VAC) PART # 500002 500013 500006 500015 500008 500017 SERIES
More informationLiftgate Terminology
SL-20 Series SL-20 Series Click the appropriate link below for the major component of the liftgate for which you are trying to find the correct part. If you are unsure of the name of the part in Waltco
More informationSECTION 6 PARTS LIST
SECTION FIGURE NO. DESCRIPTION PAGE NO. -1 - - -4-5 - - -8-9 Oven Panels, Window and Legs Exploded Drawing Air Finger Exploded Drawing Control Panel Exploded Drawing Blower and Shroud Exploded Drawing
More informationParts Catalog SLICING MACHINES
Parts Catalog Model 4600P SLICING MACHINES MODELS: 4600P, 4975P & 493 05-0-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF SLICER. GLOBE FOOD EQUIPMENT
More informationPARTS LIST ELECTRIC CHARGER 2500
PARTS LIST ELECTRIC CHARGER 2500 MOTOR ASSEMBLY ITEM PART NO. DESCRIPTION QTY 5298351 MOTOR 115 VOLT 2500 1 101 5991731 COMMUTATOR BRACKET COVER 1 102 5298441 COMMUTATOR BRACKET ASSEMBLY WITH BRUSH, BOARD,
More informationILLUSTRATED PARTS LIST
IPL MODEL STHM 71 72 1 7 7 ILLUSTRATED PARTS LIST 70 2 7 THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: STHM - 2CV with a serial number of 00001-0 SM-1A with a serial number of 001- SM-72A
More informationKlenzor 16 Klenzor 18 MPH
Klenzor 16 Klenzor 18 MPH PARTS LIST Kent MODELS 56265004(16), 56265005(18) Simple. Clean. 12/04 revised 7/09 04-12 07-4 TABLE OF CONTENTS Klenzor 16, 18 MPH 1 DESCRIPTION PAGE Base System... 2-3 Brush
More informationFor cleaning machines, parts & supplies click/visit This parts list is for machines after seiral number
PARTS LIST Advance MODELS 56264058, 56264001, 56264059, 56264060, 56264061, 56264062 This parts list is for machines after seiral number 1006184 5/94 revised 3/04 94-5 TABLE OF CONTENTS 1 DESCRIPTION
More informationPolar Trac Cab Groundsmaster 7200 Series Mower
Form No. 3408-250 Rev A Polar Trac Cab Groundsmaster 7200 Series Mower Model No. 30474 Serial No. 400000000 and Up Register at www.toro.com. Original Instructions (EN) *3408-250* A Ordering Replacement
More information365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
More informationG190 LT-145 (1992) Page 1 of 27 42" Mower Deck
132-736G190 LT-145 (1992) Page 1 of 27 42" Mower Deck 132-736G190 LT-145 (1992) Page 2 of 27 42" Mower Deck 3 17600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously existing). 813-06119
More informationBISTRO 2 Hot Chocolate Dispenser SPARE PARTS CATALOG
Hot Chocolate Dispenser SPARE PARTS CATALOG TABLE OF CONTENTS WHIPPER ASSEMBLY Pages 3-4 HOPPER ASSEMBLY Pages 4-5 TANK ASSEMBLY Pages 6-9 SWITCHES Page 9 DOOR ASSEMBLY Pages 10-11 MISCELLANEOUS COMPONENTS
More informationTubing Cutters No. 101 Tubing Cutter Spare Cutter Wheel NOTE: Order parts by Catalog Number only. DO NOT order by Reference Number. Ref.
No. 0 Tubing Cutter Wheel Housing 0 Cutter Wheel Pin and Clip (Incl. Ref. No. ) E Cutter Wheel Stop Pin 0 Roll () Roller Pin () 0 Screw w/washer Knob Retaining Ring 0 Feed Screw Thrust Washer Roll Housing
More informationTornado [Nov. 20, 2012]/Year 2000-Current: Schematics, Accessories, Brochures, Replacement & Optional Items/Carpet Care/Marathon 800, 1200 & 2000
Tornado [Nov. 20, 2012]/Year 2000-Current: Schematics, Accessories, Brochures, Replacement & Optional Items/Carpet Care/Marathon 800, 1200 & 2000 Carpet Extractors/98190 22" Marathon 2000 (20 Gallon) -
More informationAdvolution 2710 UHR
Advolution 2710 UHR 70-1700 PARTS LIST Advance MODELS 56422000, 56422002, 56422184 Nilfisk MODEL 56422001 3/06 revised 8/08 SECTION 5.9.1 06-3 TABLE OF CONTENTS Advolution 2710 / UHR 70-1700 D 5.9.1 1
More informationParts Manual MZ5225 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ5225 / 966690502 Please
More informationRC-200EX / RC-150EX Rim Clamp Tire Changer
RC-200EX / RC-150EX Rim Clamp Tire Changer For servicing motorcycle and ATV tire/wheel assemblies as well as automotive and most light truck tire/wheel assemblies (holds 6 to 8-inch wheels for manual tire
More informationParts Manual MZ52 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ52 / 962401 Please
More informationMain Components. Drain Cleaning Machine K Printed in U.S.A. Ridge Tool Company Elyria, Ohio, U.S.A.
K-00 Main Components 0 00 Standard Drum Assembly 00 Sink Drum Assembly 00 Powerfeed Assembly 0 Retaining Knob () Roll Pin / - / 0 Plunger Pin 0 Wear Plug Yoke Bearing Clamp 0 Screw / - 0 x / () Pivot Pin
More informationPARTS LIST CHAMP 2929
PARTS LIST CHAMP 2929 1 ITEM PART NO. DESCRIPTION QTY. 101 9122343 3/8-16 X 2 HEX HEAD FULL THREADED BOLT 3 102 9122100 3/8 SPLIT LOCK WASHER 3 103 9121400 3/8 I.D. X 7/8 O.D. X.064/.104 THICK WROUGHT
More informationRev.2.05 www.cmadishmachines.com Table of Contents EST-44 1. PARTS MANUAL... 3 1.1. Initial Parts Kit... 3 1.2. Exploded View Drawings... 4 1.2.1. Cabinet Assembly... 4 1.2.2. Control Box Assembly... 5
More informationPARTS 1 ST. Advance. Nilfisk. Advance. Matador TM 17,20 Models ,172205,172220,172225,172208
PARTS ST Advance Matador TM 7,0 Models 700,70,70,7,708 This parts list is for machines after serial number 909 G Nilfisk Advance setting standards revised 9/99 Form Number 0 OPTIONAL BRUSHES AND ACCESSORIES,
More informationMete-R-Matic F18 Top Dresser Starting Serial Number (U.S.A. Patent No. 5,307,952)
Last Version of the F - Has Different Pan Under Belt, Different Brush Shaft, Different Drive Roller and Shaft and has a Bolt On Side Guard. Note serial no range - manual before this starts at OPERATOR'S
More information5035 A/E. Rim Clamp Tire Changer. Parts Identification
5035 A/E Rim Clamp Tire Changer Parts Identification READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease
More informationRev.2.06A www.cmadishmachines.com Table of Contents EST-44 1. PARTS MANUAL... 3 1.1. Initial Parts Kit... 3 1.2. Exploded View Drawings... 4 1.2.1. Cabinet Assembly... 4 1.2.2. Control Box Assembly (3
More informationPart s Catalog. LX500 Lawn Tractor. Model No. 13AP60RP744. Original Instructions (EN) (01/31/06)
Part s Catalog For Parts Call 0-- or 0-- LX00 Lawn Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) For Parts Call 0-- or 0-- Model P0RP NUMBER --00 Turf Tire, 0 x 0.0 x -000-00 Rim,.0 x.0-0-0
More informationS200-P Passport Series Fire Pump Service Parts List
Document Number Issue Date 04/08/13 Rev. Date 9/24/18 S200-P Passport Series Fire Pump Service Parts List Index: Component See Pages Body and Impeller 2, 3 Pedestal and Primers 4, 5 Cross Section Views
More informationMODELS: (4800), (4300) (4300 AXP), (4800 AXP)
PARTS LIST Advance MODELS: 56303000 (4800), 56303001 (4300) 56303591 (4300 AXP), 56303592 (4800 AXP) 3/04 revised 3/11 04-3 08-11 TABLE OF CONTENTS DESCRIPTION PAGE Chassis System... 2-3 Chassis System
More informationPARTS LIST CHAMP 2929 WITHOUT SIDEKICK CHEMICAL DISPENSOR WITH SIDEKICK CHEMICAL DISPENSOR
PARTS LIST CHAMP 2929 WITHOUT SIDEKICK CHEMICAL DISPENSOR WITH SIDEKICK CHEMICAL DISPENSOR 1 ITEM PART NO. DESCRIPTION QTY. 101 9122343 3/8-16 X 2 HEX HEAD FULL THREADED BOLT - PACK OF 1 3 102 9122100
More informationPARTS LIST PONY 20 SCA
PARTS LIST PONY 20 SCA WIRING DIAGRAM PART NO. PART DESCRIPTION 4990601 GEARMOTOR - 120 VOLT 4990581 GEARMOTOR - 240 VOLT 4890391 VAC MOTOR - 115 VOLT 4891251 VAC MOTOR - 240 VOLT 4991321 BRUSH MOTOR -
More informationCALIFORNIA Proposition 65 Warning:
PARTS MANUAL P1064 For Models: L1064D, L1064A, M1064D, M1064T1, M1064T2, M1064A, M1064H, NL1064D, NL1064T1, NL1064T2, NL1064H1, NL1064H2, M40C2, M55C2, & M65C2 CALIFORNIA Proposition 65 Warning: Diesel
More informationPIÈCES DÉTACHÉES ELT125D33 1KV. Tondeuse autoportée
PIÈCES DÉTACHÉES Tondeuse autoportée ELT15D33 1KV Yvan Béal - 1, av. de l Agriculture - B.P. 16 Z.I. du Brézet - 63014 Clermont-Ferrand Cedex Tél : 04 73 91 93 51 - Télécopie : 04 73 90 3 11 www.yvanbeal.fr
More informationConvertamatic 265LX Hydro-Retriever 265HD
Convertamatic 265LX Hydro-Retriever 265HD PARTS LIST Advance MODELS 56393670, 56393675 This parts list is for machines after serial number 1002647 revised 8/00 Form Number 56042286 revised 5/00 FORM NO.
More informationMUSTANG 1500 BURNISHER
PARTS LIST MUSTANG 1500 BURNISHER NON-VAC-TRAC VAC-TRAC HANDLE ASSEMBLY ITEM PART NO. PART DESCRIPTION QTY. 5990189 COMPLETE HANDLE ASSEMBLY - 120 VOLT 1 5990199 COMPLETE HANDLE ASSEMBLY - 240 VOLT 1 101
More informationSpare Parts List ( ) Clipper V
Spare Parts List (1.008-026.0) Clipper 12-230V From Serial Number (Ref No1*) *See Serial Number Page or call manufacturer 86403900-C 02/23/ How to Use this Spare Parts List The PARTS LIST section contains
More information14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor
14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 2 of 28 Carburetor TC-640221 1 /P Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640216 1 Throttle Shaft & Lever Assembly
More information215E. Operator and Parts Manual MM158
5E Operator and Parts Manual MM58 This manual is furnished with each new TENNANT Model 5E This manual consists of Specifications; Operation; Maintenance; Appendix; the How To Use This Manual; Low Dump
More informationClean Track S16, L18. Parts List Models: (S16), (L18) Form No /11
Clean Track S6, L8 Parts List Models: 56382723 (S6), 56382724 (L8) Form No. 56042595 / TABLE OF CONTENTS DESCRIPTION PAGE Base System... 2-3 Brush System... 4-5 Decal System... 6-7 Handle System 6...
More informationSelectScrub 27. PARTS LIST Kent MODEL This model is obsolete. 4/99 revised 2/05 FORM NO (083399P-1)
PARTS LIST Kent MODEL 56636998 This model is obsolete. 4/99 revised 2/05 (083399P-1) 22 RECOMMENDED SPARE PARTS 99-4 04-6 Ref. No. Qty Description 56035302 1 Hose, Squeegee Blk 56035129 1 Hose, Tank Blk
More informationMZ 52LE. Parts Manual. Zero Turn Mower /
Parts Manual MZ 52LE Zero Turn Mower / 9677406-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
More informationHR24TS Rotary Rake. Serial Numbers and higher. Illustrated Parts Breakdown. Guards and Guard Arm, Front Hay Curtain Mount.
HRTS Rotary Rake Serial Numbers 00 and higher Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Page 0 Tongue Front Frame Guards
More informationParts Catalog. S-Series Slicer Automatic. Model:
, 07 99509 ECN 077 Parts Catalog S-Series Slicer Automatic Model: SGA SGA 05/08/07 Rev. J IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationPARTS LIST ELECTRIC CHARGER 2500
PARTS LIST ELECTRIC CHARGER 2500 120 VOLT WIRE DIAGRAM SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS 240 VOLT SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS MOTOR ASSEMBLY ITEM PART NO. PART DESCRIPTION QTY. 5298001
More informationMODEL CMA-44 PARTS MANUAL Rev 2.13
MODEL CMA-44 PARTS MANUAL Rev 2.13 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com Table of Contents CMA-44 1. PARTS MANUAL... 4
More informationSC D, 20R Advance
Model: SC1500 20D - Advance SC1500 20R Part List US-English Table of Contents GENERAL VIEW 3 CHASSIS SYSTEM 5 DRIVE WHEEL ASSEMBLY 8 PLATFORM ASSEMBLY 10 CONTROL SYSTEM 12 DECAL SYSTEM 14 ELECTRICAL SYSTEM
More informationSelectScrub 17. PARTS LIST Kent MODEL This parts list is for machines after serial number /99 revised 8/02 FORM NO.
SelectScrub PARTS LIST Kent MODEL 530300 This parts list is for machines after serial number 959 3/99 revised /0 99-3 TABLE OF CONTENTS SelectScrub DESCRIPTION PAGE Chassis System... -3 Handle System...
More informationWRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS
WRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS BRUSH LIFT 101 9121960 3/8 EXTERNAL STAR LOCK WASHER 1 102 9122030 3/8-16 X 3/4 BUTTON HEAD SOCKET SCREW 1 103 2694261 CABLE 1 104 2391771 90 HOSE
More informationK&T Saw Shop or
12-400030-11 MAC 100A 11/86 to 03/89 IPL 219598-01 Page 1 of 12 Accessories & Replacement Parts www.ktoutdoor.com 12-400030-11 MAC 100A 11/86 to 03/89 IPL 219598-01 Page 2 of 12 Accessories & Replacement
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS OV300E MINI RACK OVEN ML-132155 OV300E A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43051 Rev. C (July 2017) F-43051 Rev. C (July 2017)
More informationNilfisk-ALTO SO4500. Model: Nilfisk-Alto SO4500. Part List US-English
Model: Nilfisk-Alto SO4500 Part List US-English Table of Contents SO4500 (1) 3 SO4500 (2) 5 Accessories 7 Single parts (1) 9 Single parts (2) 11 Single parts (3) 13 SO4500 (1) STEAMERUK26 3 SO4500 (1)
More informationASTRO ATS-12 TABBER PARTS MANUAL
ASTRO ATS-12 TABBER PARTS MANUAL This manual is intended solely for the use and information of Astro Machine Corp., its designated agents, customers, and their employees. The information in this guide
More informationMain Components Early Style
Main Components Early Style * * 0 0 0 0 0 Service Notes: Ref. No.. Do not substitute bolt longer than / inches. Severe damage to Rear Bearing will result. Ref. No.. To assure proper oil flow, position
More informationILLUSTRATED PARTS LIST
Anoka, MN. 0- Telephone -00--00 Facsimile -00--0 FCB POST-MIX DISPENSER WITH HOT-GAS DEFROST AND V ELECTRONICS (DEFROST/ERROR INDICATOR LIGHTS) UNIT PART NO. 0000 000 THIS DOCUMENT CONTAINS IMPORTANT INFORMATION
More informationParts Catalog SLICING MACHINES
Parts Catalog 00N Slicer SLICING MACHINES MODELS: 00N, 0N & 9N -- IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF SLICER. GLOBE FOOD EQUIPMENT COMPANY
More informationIMAGE 16, IMAGE V
Model: IMAGE 16 IMAGE 20 Part List US-English Table of Contents Accessories 3 Final assembly IMAGE 16 5 Final assembly IMAGE 20 8 Recovery tank IMAGE 16 11 Recovery tank IMAGE 20 13 Brush housing IMAGE
More informationRepair Parts List WASHER MODEL NUMBER MAF25MC4VW. When requesting service or ordering parts, always provide the following information:
Repair Parts List WASHER MODEL NUMBER MAF25MC4VW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005
More informationClassic12 Belt Sander
Classic12 Belt Sander Section II Parts and Service Manual AMERICAN SANDERS TECHNOLOGY Classic 12 Belt Sander Operator's Manual Page 21 Assembly Drawing #1 11/00 7 8 9 12 13 11 1 10 85 14 6 81 80 79 76
More informationMUSTANG 1500 BURNISHER
PARTS LIST MUSTANG 1500 BURNISHER NON-VAC-TRAC VAC-TRAC HANDLE ASSEMBLY ITEM PART NO. PART DESCRIPTION QTY. 5990189 COMPLETE HANDLE ASSEMBLY - 120 VOLT 1 5990199 COMPLETE HANDLE ASSEMBLY - 240 VOLT 1 101
More informationAir Intake Group
http://www.kohlerplus.com/print_assembly.asp?assemblyid=2988&modelid=702&... Page sur 2 Air Intake Group 0-24-8 Page 2 sur 2 Air Intake Group 0-24-8 Ref # Part Description Qty 2474306-S KIT, AIR CLEANER
More informationSPARE PARTS LIST EARLY ENTRY SAWS SOFF CUT 4200,
SPARE PARTS LIST EARLY ENTRY SAWS SOFF CUT 4200, 2016-12 BLADE BLOCK SOFF CUT 4200, 2016-12 BLADE BLOCK SOFF CUT 4200, 2016-12 Ref Part No Description Remark QTY KIT 1 505 78 82-01 BLADE 1 67 2 505 78
More informationS/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly
1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/
More informationPARTS LIST WRANGLER 26-VS
PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY
More informationEnglish. Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual MZ5225 / 99991 MZ125 / 99991 MZ22 / 999919 MZ5225BF / 999920 MZ125BF / 999921 MZ5225C / 99994 MZ125C / 999949 MZ25 / 99990 Please read the operator s manual carefully and make sure you understand
More information4 - Husqvarna CHASSIS / FRAME
- Husqvarna CHASSIS / FRAME 0 0 CHASSIS / FRAME ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION..... GUARD, REAR..... SUPPORT, TOP..... RHSSNB ¼- x ½.. 0... RIVET, / STAVEX.. 0... NUT ¼-
More informationWhirlamatic UHS20. revised 2/01 FORM NO
Whirlamatic UHS20 PARTS LIST Advance MODELS 56183700(115V) 56183701(100V/OBSOLETE), 56183705(230V) This parts list is for machines after serial number 286668 revised 2/01 00-3 TABLE OF CONTENTS Whirlamatic
More informationNOTE: Order parts by Catalog Number Only. DO NOT order by Reference Number.
K-C/K-R Cage Machine Transportation Cart Assembly 0 NOTE: Order parts by Catalog Number Only. Ref. No. 0 Catalog No. 00 000 0 0 0 0 0 00 0 0 0 0 0 Description Cart Assembly Hex Nut /" () Lock Washer /"
More informationELITE SERIES SURGICAL TABLES
Page 39 Item Part No. Description Qty. ELITE SERIES SURGICAL TABLES PARTS CATALOG MODEL ELITE 3500 Page 1 Item Part No. Description Qty. INTRODUCTION This manual contains the exploded views and replacement
More informationYARD CRUISER HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4
Parts Manual for HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4 MODEL HZS15423KVE HZS18483BVE YZ16424BVE YZ20484BVE McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision
More informationPITNEY BOWES SPEED SORT CONVEYOR SSCON9-DRY CONTACT. Parts Manual PARTS-SSCON9-DRYCONTACT 1
SPEED SORT CONVEYOR SSCON9-DRY CONTACT Parts Manual PARTS-SSCON9-DRYCONTACT 1 VERSION HISTORY The table below summarizes the history of this document as it is published onto the company website(s). It
More information