DISCONTINUED VERSION Parts listed in this catalog may no longer be available.

Transcription

1 JDF-4 Prior to S/N DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217) / Bunn-O-Matic Corporation

2 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. ( BUNN ) warrants equipment manufactured by it as follows: 1) All equipment other than as specified below: 2 years parts and 1 year labor. 2) Electronic circuit and/or control boards: parts and labor for 3 years. 3) Compressors on refrigeration equipment: 5 years parts and 1 year labor. 4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) or by writing to Post Office Box 3227, Springfield, Illinois ; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages

3 TABLE OF CONTENTS Main Frame & Covers... 4 Upper Cabinet & Panels... 6 Water Tank Assy Water Valve Assy Refrigeration Components Fan Assy Compressor Assy (120V Models) Compressor Assy (230V Models) Dispense Platform Assy (Early Models) Dispense Platform Assy (Late Models) Dispense Valve Assy Plain Water Manifold Assy (Early Models) Plain Water Manifold Assy (Late Models) Pump Assy Rinse Water Manifold Assy (Early Models) Rinse Water Manifold Assy (Late Models) Bottle Adapter Assy Door Assy Electrical Components Refillable Container Assy Numerical Index

4 Refrigeration Compressor and Condensor Fan Motor only BUNN MAIN FRAME & COVERS JDF ! WARNING DO NOT OVERLOAD CIRCUIT. ALWAYS ELECTRICALLY GROUND THE CHASSIS OR ADAPTOR PLUG. DO NOT DEFORM PLUG OR CORD. FOLLOW NATIONAL AND LOCAL ELECTRICAL CODES. KEEP COMBUSTIBLES AWAY. FAILURE TO COMPLY RISKS EQUIPMENT DAMAGE, FIRE OR SHOCK HAZARD. READ THE ENTIRE OPERATING MANUAL BEFORE USING THIS PRODUCT E 5/98 '1994 Bunn-O-Matic Corporation SANITIZE P

5 ITEM PART NO. QTY. DESCRIPTION Base Assy MAIN FRAME & COVERS Leg Pad, Non-skid Order item Frame Assy, Refrigeration Screw, Locking #10-32 x.438" Frame Tray Bushing, Snap (8 less used on Late Models) Plug (8 less used on Late Models) Panel, Right w/decal (Includes item 22) Screw, BLK #10-32 x.38" Panel, Top w/decal (includes item 9) Screw, BLK #10-32 x.38" Decal, Refrigeration ON/OFF Panel, Left w/decals (Includes items 11,12,13,22 & 23) Screw, BLK #10-32 x.38" Schematic, Refrigeration (Early Models) Decal, Refrigerant Charge Decal, Refrigerant Dye (Early Models) Panel, Upper Rear Screw, BLK #10-32 x.38" Panel, Lower Rear (Early Models) Panel, Lower Rear (Late Models) Screw, BLK #10-32 x.38" Plug.812" Dia Decal, Sanitize Switch Bracket, Left Bracket, Right Screw #8-32 x.38" Drip Tray Assy (Includes item 24) Cover, Drip Tray Cup Guide Decal, Moving Parts Warning Decal, Warning - Electrical Strike Assy, Self Adhesive Catch, Magnetic Gasket, U-channel 4.60" (Order item 29) Gasket, U-channel 2.25" (Order item 29) Leg Kit (Includes 4 Legs and 4 Pads) Gasket, U-channel 18.0" (Use as required)

6 BUNN UPPER CABINET & PANELS JDF Early Models A B D NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. P

7 ITEM PART NO. QTY. DESCRIPTION UPPER CABINET & PANELS Cabinet Assy (Includes items 8 thru 12 & 30) Bracket Screw Cap (Early Models) Foam, Upper Cabinet Plate, Upper Cabinet Screw #8-32 x.38" Bracket, Upper Cabinet Screw # Screw, Locking #10-32 x.438" Wrap, Upper Cabinet Screw, Locking #10-32 x.438" Fan Assy Screw # Water Coil, Upper Cabinet Screw #6-32 x.38" Cover (Includes item 11) Screw # Gasket Bracket Panel, Front Dispense Screw #6-32 x.50" Decal, Dispense/Rinse Decal, Flow Adj Gasket, Drip Nozzle Assy (Includes items 18-20) O-ring Shield Also order item Mixer, Spiral Std Mixer, Spiral High Viscosity Product Shelf Splash Guard (Includes item 23) Screw #8-32 x.38" (Continued)

8 BUNN UPPER CABINET & PANELS (Continued) JDF Early Models A B D NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. P

9 UPPER CABINET & PANELS ITEM PART NO. QTY. DESCRIPTION Schematic, Electrical Hose.38" ID x.50" OD x 36.0" (Order item 36) (Early Models) Decal, Concentrate # Decal, Concentrate # Decal, Concentrate #3 Early Models Clamp " (Early Models) Nut, Swivel (Early Models) Fitting (Early Models) Plug.56" diam. (Early Models) Plug, BLK.50" diam. (Late Models) Temperature Sensor Knob Nozzle, Cold Water (Includes item 33) O-ring Plug Gasket, U-channel 2.25" (Order item 38) Hose.38" ID x.50" OD x 72.0" (Use as required) Hose.38" ID x.50" OD x 48.0" (Use as required) 37 M Grease, USDA H-1 (Use when assembling items 17,18 & 19) Gasket, U-channel 18.0" (Use as required)

10 BUNN WATER TANK ASSY JDF Early Models 90 psig max operating pressure Strainer Assembly # (Replacement Screen # ) BUNN FLOW E psig max operating pressure Strainer Assembly # (Replacement Screen # ) BUNN FLOW B G A 29 F M L C NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. 10 P

11 ITEM PART NO. QTY. DESCRIPTION Tank Assy Evaporator Coil Spacer WATER TANK ASSY Product Coil Assy (Includes 3 each of items 5 & 6) Spacer Tie, Cable SST 17.5" long Tie, Cable SST 28.0" long Tie, Nylon Lid, Front (Includes item 9) Screw #8-32 x.50" Insulation Lid, Rear (Includes item 11)(Early Models) Lid, Rear (Includes item 11)(Late Models) Screw #8-32 x.50" Insulation (Early Models) Insulation (Late Models) Caplug w/insulation Grommet (Early Models) Grommet (Late Models) Temperature Sensor Kit Grommet Level Probe Assy (Includes hardware indented below) Washer Lockwasher, Internal-tooth # Nut # Fitting, Elbow Clamp " Tube, Ice Bank Control Nut #8-32 Early Models Return Manifold Strainer Assy (Includes items 22,23 & 24) Cap, End Screen Housing, Strainer (Order item 21) Gasket (Continued)

12 BUNN 19 WATER TANK ASSY (Continued) JDF Early Models 90 psig max operating pressure Strainer Assembly # (Replacement Screen # ) BUNN FLOW E psig max operating pressure Strainer Assembly # (Replacement Screen # ) BUNN FLOW B G A 29 F M L C NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. 12 P

13 ITEM PART NO. QTY. DESCRIPTION Fitting, Barb Swivel Nut Tube, Silicone.38" ID x.595" OD x 2.625" (Order item 46) Clamp " Elbow Tube, Silicone.38" ID x.595" OD x 2.12" Clamp " Tube, Silicone.38" ID x.595" OD x 30.0" (Order item 46)(Early Models) Tube, Silicone.38" ID x.595" OD x 21.0" (Order item 46)(Late Models) Pump Assy 120V Pump Assy 230V Fitting Bushing Tee Tube, Silicone.38" ID x.595" OD x 1.6" (Order item 46) Fitting Deflector Fitting (Early Models) Elbow (Late Models) Elbow Gasket WATER TANK ASSY Bracket Screw, Locking #10-32 x.438" Early Models Tube, Silicone.38" ID x.595" OD x 6.0" (Order item 46)(Late Models) Tube, Silicone.38" ID x.595" OD x 120.0" (Use as required)

14 BUNN WATER VALVE ASSEMBLY JDF G H E C RINSE WATER CONNECTION 17 MAIN WATER Close main water valve before disconnecting the dispense platform. MAIN WATER CONNECTION WATER BATH P2474 NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

15 ITEM PART NO. QTY. DESCRIPTION WATER VALVE ASSEMBLY Bracket, Valve Mounting Screw #8-32 x.25" Decal, Rinse Water Connection Decal, Comply to Plumbing Decal, Main Water Connection Clip, Tube (One less used on Late Models) Clamp Screw #8-32 x.25" Bracket Screw #8-32 x.25" Valve, Solenoid 120V (Includes items 9-12) Valve, Solenoid 230V (Includes items 9-11) Screw #10-32 x.38" (Early Models) Screw #10-32 x.625" (Late Models) Spacer (Late Models) Lockwasher # Solenoid Valve Coil 120V Solenoid Valve Coil 230V Solenoid Valve Repair Kit (Includes Plunger, Spring and O-ring) Solenoid Valve Base Kit 120V (Includes O-ring) Core Assy Kit 230V Guide Kit Fitting Connector Gasket Elbow Clamp " Decal, Wrap Around - Rinse Line (Early Models) Hose.25" ID x.44" OD x 27.0" (Order item 44) Hose, Silicone.25" ID x.50" OD x 12.0" (Order item 45) Tee Hose.25" ID x.44" OD x 18.0" (Order item 44) Hose.38" ID x.595" OD x 21.0" (Order item 43) Decal, Wrap Around - Water Line (Early Models) Clamp " Fitting, Elbow.38" Barb (Continued)

16 BUNN WATER VALVE ASSEMBLY (Continued) JDF G H E C RINSE WATER CONNECTION 17 MAIN WATER Close main water valve before disconnecting the dispense platform. MAIN WATER CONNECTION WATER BATH P2474 NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

17 ITEM PART NO. QTY. DESCRIPTION Connector WATER VALVE ASSEMBLY Valve (Also order item 29) Decal, Main Water Valve Bushing Elbow Fitting.25" Barb Valve (Also order item 34) Decal, Water Bath Fill Valve Tee Connector Gasket Nipple.38" Barb Nut, Swivel Hose, Silicone.25" ID x.50" OD x 7.40" (Order item 45) Hose, Silicone.25" ID x.50" OD x 1.75" (Order item 45) Decal, Caution - Close Valve Hose.38" ID x.595" OD x 120.0" (Use as required) Hose.25" ID x.44" OD x 120.0" (Use as required) Hose, Silicone.25" ID x.50" OD x 12.0" (Use as required) Hose, Silicone.25" ID x.50" OD x 36.0" (Use as required) Hose, Silicone.25" ID x.50" OD x 120.0" (Use as required)

18 BUNN REFRIGERATION COMPONENTS JDF J K M L A K B 2 J 3 4 P2475 NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

19 ITEM PART NO. QTY. DESCRIPTION Air Filter REFRIGERATION COMPONENTS Condenser Screw #8-32 x.25" Shroud Screw #6 x.38" Fan Assy (See CONDENSER FAN ASSY) Screw #6 x.38" Fan Assy (See UPPER CABINET ASSY) Water Coil (See UPPER CABINET ASSY) Compressor Assy (See COMPRESSOR ASSY) Grommet Sleeve Order item Washer Nut Tube (Requires brazing to install) Tube (Requires brazing to install) Tube (Requires brazing to install) Accumulator (Requires brazing to install) Tube (Requires brazing to install) Tube Adapter (Requires brazing to install) Mounting Kit (Includes four each of items 8 & 9) 19 M Insulation, Tube.38" ID (Use as required) 20 M Insulation, Tube 1.625" ID (Use as required)

20 BUNN FAN ASSEMBLY JDF P

21 ITEM PART NO. QTY. DESCRIPTION FAN ASSEMBLY Fan Assy 120V (Includes items 1-5) Fan Assy 230V (Includes items 1-5) Screw, Crimptite #6 x.38" Mount Screw, Thread Forming #8-32 x.437" Motor Assy 120V Motor Assy 230V Blade, Fan Silencer Speed Nut

22 BUNN COMPRESSOR ASSEMBLY (120V Models) JDF P

23 COMPRESSOR ASSEMBLY (120V Models) ITEM PART NO. QTY. DESCRIPTION Compressor Assy (Includes items 1-8) Compressor Housing (Not serviced) Relay Overload Protector Retainer Terminal Block Cover Cover Clip Screw, Pan Head, Ground M3.5 x 6mm

24 BUNN COMPRESSOR ASSEMBLY (230V Models) JDF P

25 COMPRESSOR ASSEMBLY (230V Models) ITEM PART NO. QTY. DESCRIPTION Compressor Assy (Includes items 1-10) Compressor Housing (Not serviced) Relay Overload Protector Retainer Terminal Block Cover Cover Clip Screw, Pan Head, Ground M3.5 x 6mm Capacitor, Start Cap, Start Capacitor Not Illustrated

26 BUNN DISPENSE PLATFORM ASSEMBLY (Early Models) JDF-4 H F D EARLY MODELS NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. 26 P

27 DISPENSE PLATFORM ASSEMBLY (Early Models) ITEM PART NO. QTY. DESCRIPTION Platform (Not serviced) Dispense Valve (See DISPENSE VALVE ASSY) Screw #8-18 x.312" Bracket Screw, Locking #8-32 x.25" Valve Assy, Water (Includes items 5-8) Screw, Locking #10-32 x.312" Solenoid Valve Coil Solenoid Valve Repair Kit (Includes Plunger, Spring and O-ring) Solenoid Valve Base Kit (Not serviced, order item 4) Guide Kit Fitting (Early Models) Nut, Compression (Early Models) Socket, Cold Water 4.5" Tube (Early Models) Socket, Cold Water 1.5" Tube (Late Models) Nozzle, Cold Water (See UPPER CABINET & PANELS) Bracket Screw, Locking #6-32 x.25" Clip Valve, Needle Elbow Gasket Manifold, Plain Water (See PLAIN WATER MANIFOLD ASSY) Fitting Hose, Silicone.25" ID x.50" OD x 7.0" (Order item 37) Rail Screw, Locking #8-32 x.25" Elbow Clamp " Hose.38" ID x.595" OD x 21.0" (Order item 38) Bushing, Rubber (Continued)

28 BUNN DISPENSE PLATFORM ASSEMBLY (Early Models) JDF-4 (Continued) H F D EARLY MODELS NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. 28 P

29 ITEM PART NO. QTY. DESCRIPTION Pump Assy (See PUMP ASSEMBLY) Screw x.625" Washer Nut, Elastic Lock # Manifold, Rinse Water (See RINSE WATER MANIFOLD ASSY) Elbow.25" Barb Clip, Retainer Plate Screw #8-18 x.312" Bottle Adapter (See BOTTLE ADAPTER ASSY) Screw #8-18 x.312" Gasket Connector Fitting DISPENSE PLATFORM ASSEMBLY (Early Models) Hose, Silicone.313" O.D. x 4.0" (Order item 36) Hose, Silicone.313" O.D. x 12.0" (Use as required) Hose, Silicone.25" ID x.50" OD x 12.0" (Use as required) Hose.38" ID x.595" OD x 120.0" (Use as required) Not Illustrated Wiring Harness, Platform Rear Wiring Harness, Dispense Valve

30 BUNN DISPENSE PLATFORM ASSEMBLY (Late Models) JDF-4 H F D NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. 30 P

31 DISPENSE PLATFORM ASSEMBLY (Late Models) ITEM PART NO. QTY. DESCRIPTION Platform Assy (Includes items 1-16, 18-21, 23, 25-30, 32, 35 & 36) Dispense Valve (See DISPENSE VALVE ASSY) Screw #8-18 x.312" Bracket Screw, Locking #8-32 x.25" Valve Assy, Water (Includes items 5-8) Screw, Locking #10-32 x.312" Solenoid Valve Coil Solenoid Valve Repair Kit (Includes Plunger, Spring and O-ring) Solenoid Valve Base Kit (Not serviced, order item 4) Guide Kit Valve, Needle Elbow Manifold, Plain Water (See PLAIN WATER MANIFOLD ASSY) Gasket Elbow Fitting Compression Nut & Sleeve Hose, Silicone.313" O.D. x 8.0" (Order item 32) Fitting, Cold Water Socket Screw #6-32 x 38" Nozzle, Cold Water (See UPPER CABINET & PANELS) Clip Fitting Hose, Silicone.25" ID x.50" OD x 7.0" (Order item 33) Rail Screw, Locking #8-32 x.25" Fitting, Quick Disconnect, Male Clamp " Hose.38" ID x.595" OD x 21.0" (Order item 34) Bushing, Rubber (Continued)

32 BUNN DISPENSE PLATFORM ASSEMBLY (Late Models) (Continued) JDF-4 H F D P

33 DISPENSE PLATFORM ASSEMBLY (Late Models) ITEM PART NO. QTY. DESCRIPTION Pump Assy (See PUMP ASSEMBLY) Screw x.625" Washer Nut, Elastic Lock # Manifold, Rinse Water (See RINSE WATER MANIFOLD ASSY) Fitting, Quick Disconnect, Female Clip, Retainer Bottle Adapter (See BOTTLE ADAPTER ASSY) Screw #8-18 x.312" Thumbscrew Hose, Silicone.313" O.D. x 12.0" (Use as required) Hose, Silicone.25" ID x.50" OD x 12.0" (Use as required) Hose.38" ID x.595" OD x 120.0" (Use as required) Not Illustrated Wiring Harness, Platform Rear Wiring Harness, Dispense Valve

34 BUNN DISPENSE VALVE ASSEMBLY JDF P

35 ITEM PART NO. QTY. DESCRIPTION DISPENSE VALVE ASSEMBLY Dispense Valve Assy (Includes items 1-23) Valve, Solenoid (Includes items 2-7) Solenoid Valve Coil Guide Kit (Includes Guide, Washer and O-ring) Solenoid Valve Base Kit (Includes O-ring and items 6 & 7) Solenoid Valve Repair Kit (Includes Plunger, Spring and O-ring) O-ring O-ring Bracket Screw #8-18 x.312" Body O-ring (Also use item 25) Sleeve Piston O-ring (Also use item 25) Bonnet, Adjuster Spring, Flow Control O-ring (Also use item 25) Adjuster, Position Bracket Screw #8-18 x.312" Bracket, Fitting Screw #6-32 x.25" O-ring (Also use item 25) Fitting, Elbow Clamp " (Early Models) Hose.38" ID x.595" OD x 10.25" (Order item 24)(Early Models) Hose.38" ID x.595" OD x 120.0" (Use as required) 25 M Grease, USDA H-1 (Use when assembling items 10,13,16 & 20)

36 BUNN PLAIN WATER MANIFOLD (EARLY MODELS) JDF EARLY MODELS P LATE MODELS P

37 PLAIN WATER MANIFOLD (EARLY MODELS) ITEM PART NO. QTY. DESCRIPTION Elbow (Early Models) Clamp " Hose.38" ID x.595" OD x 1.65" (Order item 19)(Early Models) Tee (One less used on Early Models) Hose.38" ID x.595" OD x 1.5" (Order item 19)(Early Models) Hose.38" ID x.595" OD x 2.50" (Order item 19)(Early Models) Hose.25" ID x.44" OD x 1.75" (Order item 20) Clamp " (Two less used on Late Models) Fitting O-ring Fitting Tee (One less used on Late Models) Hose.25" ID x.44" OD x 3.25" (Order item 20)(Early Models) Fitting (Early Models) Hose.25" ID x.44" OD x 3.50" (Order item 20)(Early Models) Hose.38" ID x.595" OD x 2.25" (Order item 19)(Late Models) Hose.38" ID x.595" OD x 9.25" (Order item 19)(Late Models) Fitting (Late Models) Hose.38" ID x.595" OD x 120.0" (Use as required) Hose.25" ID x.44" OD x 120.0" (Use as required)

38 BUNN PLAIN WATER MANIFOLD (LATE MODELS) JDF P

39 PLAIN WATER MANIFOLD (LATE MODELS) ITEM PART NO. QTY. DESCRIPTION Manifold, SST Clamp " Hose.25" ID x.44" OD x 1.25" (Order item 13) Fitting O-ring Hose.25" ID x.44" OD x 2.50" (Order item 13) Fitting Hose.38" ID x.595" OD x 3.50" (Order item 12) Clamp " Fitting, Quick Disconnect, Female Dispense Valve (See DISPENSE VALVE) Hose.38" ID x.595" OD x 120.0" (Use as required) Hose.25" ID x.44" OD x 120.0" (Use as required)

40 BUNN PUMP ASSEMBLY JDF Early Models Early Models P

41 ITEM PART NO. QTY. DESCRIPTION PUMP ASSEMBLY Pump Assy (Includes items 1-29) Motor Assy (Refer to item 34) Magnet Hub Lockwasher, Internal-tooth # Screw, Locking #10-32 x.50" Sensor, RPM Screw #4-40 x.38" Gasket Bushing Nut, Elastic Lock # Mount Assy, Pump (Includes items 8,9 & 10) Insert, Well Nut # Insert, Threaded # Bearing & Spacer (Early Models) Bearing, Sleeve (Late Models) Rotor Retaining Ring Screw, Socket Head #10-32 x 1.75" Spring Washer Nut, Elastic Lock # Tube, Neoprene.25" ID x.45" OD x 9.00" (Order item 32 & 33)(Early Models) Tube, Neoprene.25" ID x.45" OD x 21.00" (Order item 32 & 33)(Late Models) Bolt, Shoulder # Retainer Screw #10-32 x.50" Standoff, Pump Band Compression Band Screw, Locking #8-32 x.25" Clamp (One less used on Late Models) Fitting, Elbow (One less used on Late Models) Clamp " (Early Models) (Continued)

42 BUNN PUMP ASSEMBLY (Continued) JDF Early Models Early Models P

43 ITEM PART NO. QTY. DESCRIPTION PUMP ASSEMBLY Hose.38" ID x.595" OD x 7.25" (Order item 31)(Early Models) Hose.38" ID x.595" OD x 7.25" (Order item 31)(Late Models) Fitting, Bottle Adapter O-ring (Also use item 30) 30 M Lubricant (Use when installing item 29) Hose.38" ID x.595" OD x 120.0" (Use as required) Tube, Neoprene.25" ID x.45" OD x 12.0" (Use as required) Tube, Neoprene.25" ID x.45" OD x 36.0" (Use as required) Tube, Neoprene.25" ID x.45" OD x 60.0" (Use as required) 33 M Grease, Krytox.50 oz. (Apply to outside of tube only. Use as required) Motor Replacement Kit (Includes items 1,2,3 and mounting hardware)

44 BUNN RINSE WATER MANIFOLD (EARLY MODELS) JDF P

45 ITEM PART NO. QTY. DESCRIPTION Fitting, Elbow Clamp " RINSE WATER MANIFOLD (EARLY MODELS) Hose.25" ID x.44" OD x 1.50" (Order item 11)(Early Models) Hose.25" ID x.44" OD x 4.00" (Order item 11)(Late Models) Tee Hose.25" ID x.44" OD x 2.50" (Order item 11) Fitting, Elbow (See BOTTLE ADAPTER) O-ring (See BOTTLE ADAPTER) Hose.25" ID x.44" OD x 3.0" (Order item 11) Elbow Hose.25" ID x.44" OD x 2.75" (Order item 11)(Early Models) Hose.25" ID x.44" OD x 3.00" (Order item 11)(Late Models) Hose.25" ID x.44" OD x 120.0" (Use as required)

46 BUNN RINSE WATER MANIFOLD (LATE MODELS) JDF P

47 RINSE WATER MANIFOLD (LATE MODELS) ITEM PART NO. QTY. DESCRIPTION Manifold, SST Clamp " Hose.25" ID x.44" OD x 1.25" (Order item 13) Bottle Adapter (See BOTTLE ADAPTER) Hose.25" ID x.44" OD x 3.50" (Order item 13) Fitting, Quick Disconnect, Male Hose.25" ID x.44" OD x 120.0" (Use as required)

48 BUNN BOTTLE ADAPTER ASSEMBLY JDF P

49 ITEM PART NO. QTY. DESCRIPTION BOTTLE ADAPTER ASSEMBLY Adapter Assy, Bottle (Includes items 1-16) Spool O-ring Seal, Rotary Boot, Teflon (Also order item 17) Opener (Order item 6) Body Assy. (Includes items 5 & 7) Probe (Order item 6) Switch, Membrane Detent, Membrane Switch Spring Plate, Detent Nut, Brass w/tin Plate.50-20" Clip, Retainer Fitting, Elbow O-ring (Also order item 17) Plate Screw 17 M Grease, USDA H-1 (Use when installing items 4 & 15)

50 BUNN DOOR ASSEMBLY JDF Dispensers W/O Lighted Door P

51 ITEM PART NO. QTY. DESCRIPTION DOOR ASSEMBLY Door Assy. 120V, Lited, Pushbutton (Incl. items 1-29 & Membrane Switch) Door Assy. 120V, Lited, Portion Control (Incl. items 1-29 & Membrane Switch) Door Assy. 120V, Unlited, Pushbutton (Incl. items 1-29 & Membrane Switch) Door Assy. 120V, Unlited, Portion Control (Incl. items 1-29 & Membrane Switch) Door Assy. 120V, Lited, Pushbutton (Incl. items 1-17,20-29 & Membrane Switch) Door Assy. 120V, Lited, Portion Control (Incl. items 1-17,20-29 & Membr. Switch) Door Assy. 230V, Lited, Pushbutton (Incl. items 1-29 & Membrane Switch) Door Assy. 230V, Lited, Portion Control (Incl. items 1-29 & Membrane Switch) Door Assy. 230V, Unlited, Pushbutton (Incl. items 1-29 & Membrane Switch) Door Assy. 230V, Unlited, Portion Control (Incl. items 1-29 & Membrane Switch) Gasket Gasket Panel, Inside Screw # Decal, Brixing & Cleaning Gas Spring Stud, Ball Washer Nut, Elastic Lock.312" Angle, Hinge Screw # Bushing, Strain Relief Hinge Screw, BLK.25"-20 x.75" Insulation, Top (Early Models) Insulation Cover, Front Keylock w/keys Collar, Lock Pad, Adhesive, Left & Right Cover Decal "BUNN" Strip, Adhesive Flavor Strips (Continued)

52 BUNN DOOR ASSEMBLY (Continued) JDF Dispensers W/O Lighted Door P

53 ITEM PART NO. QTY. DESCRIPTION DOOR ASSEMBLY Panel, Reflector Screw # Lamp Holder, Lamp Dispensers with lighted door only Wiring Harness 120V Wiring Harness 230V Lens, Fixed Graphics, Merchandiser (Not serviced) Lens, Removable Foam, Insulation (Dispensers w/non Lighted Door) Wiring Harness, Door Light 120V Wiring Harness, Door Light 230V Wiring Harness, Touch Pad Not Illustrated Decal, Flavors (Grapefruit Juice, Apple Juice, Orange Passion Fruit Guava Cocktail, Prune Juice, Orange Juice, Grape Juice, Raspberry Lemonade, Orange Juice Plus Calcium & Vitamin C, Lemonade, Cranberry Juice Cocktail, Fruit Punch, Strawberry Kiwi, Raspberry Flavored Blend, Peach Flavored Blend, Pineapple Juice & Iced Tea)

54 C A C J5 BUNN ELECTRICAL COMPONENTS JDF Early Models LINE J2 J1 J7 J3 J6 J4 J8 J9 1 RINSE WATER CONNECTION 3 2 MAIN WATER CONNECTION MAIN WATER CONNECTION RINSE WATER CONNECTION A SANITIZE MAXIMUM RINSE WATER TEMPERATURE: 170 F (76.6 C) Use Bunn-O-Matic tubing, part number XX (See Illustrated Parts Catalog for complete part number) for hot water connection. Hot Water Rinse Connection Alternate Connection (When Hot Water source is not available) Hot Water connection (See Caution) 3/8" x 3/8" x 3/8" Barb Tee B.O.M. PN (may be installed internal or external to the dispenser) NOTES: Use Bunn-O-Matic tubing, part number XX for all connections. (See Illustrated Parts Catalog for complete part number) Clamp all hose connections with Bunn-O-Matic part number (hose clamp) B 11/ BUNN-O-MATIC CORPORATION Cold Water Connection HAZARDOUS VOLTAGE DISCONNECT FROM POWER SOURCE BEFORE REMOVING! WARNING Cold Water Connection EARLY MODELS P

55 ITEM PART NO. QTY. DESCRIPTION ELECTRICAL COMPONENTS Bracket Screw #8-32 x.38" Switch, Refrigeration ON/OFF Transformer 120V Transformer 230V Screw #8-32 x.38" Rectifier Screw #8-32 x.75" Ballast 120V (Dispensers with lighted door only) Ballast 230V (Dispensers with lighted door only) Screw #8-32 x.38" Bushing, Strain Relief Switch, Sanitize Screw, Grounding Bracket (Early Models. Order Late Model Bracket) Bracket (Late Models) Screw #8-32 x.25" Bushing (Early Models) Gasket, U-channel 4.60" (Late Models)(Order item 29) Indicator, Audio Screw #6-32 x.38" PC Board Nut, Keps # Spacer Cover Assy (Includes items 15, 16 & 22) Screw #8-32 x.25" Decal, Dip Switch Decal, Plumbing Switch, Membrane (Push Button models) Switch, Membrane (Portion Control models) Bracket Screw #10-32 x.38" Ice Bank Control Screw, Locking #6-32 x.25" Early Models Switch, Door Open Nut, Grounding (Continued)

56 C A C J5 BUNN ELECTRICAL COMPONENTS (Continued) JDF Early Models LINE J2 J1 J7 J3 J6 J4 J8 J9 1 RINSE WATER CONNECTION 3 2 MAIN WATER CONNECTION MAIN WATER CONNECTION RINSE WATER CONNECTION A SANITIZE MAXIMUM RINSE WATER TEMPERATURE: 170 F (76.6 C) Use Bunn-O-Matic tubing, part number XX (See Illustrated Parts Catalog for complete part number) for hot water connection. Hot Water Rinse Connection Alternate Connection (When Hot Water source is not available) Hot Water connection (See Caution) 3/8" x 3/8" x 3/8" Barb Tee B.O.M. PN (may be installed internal or external to the dispenser) NOTES: Use Bunn-O-Matic tubing, part number XX for all connections. (See Illustrated Parts Catalog for complete part number) Clamp all hose connections with Bunn-O-Matic part number (hose clamp) B 11/ BUNN-O-MATIC CORPORATION Cold Water Connection HAZARDOUS VOLTAGE DISCONNECT FROM POWER SOURCE BEFORE REMOVING! WARNING Cold Water Connection EARLY MODELS P

57 ITEM PART NO. QTY. DESCRIPTION ELECTRICAL COMPONENTS Decal, Warning - Hazardous Voltage Relay 120V Relay 230V Screw, Truss Head #8-32 x.38" Late Models EMI Filter (230V Models only) Screw, Truss Head #8-32 x 38" The following items are not illustrated: Power Cord 120V ` Power Cord 230V Wiring Harness, Main 120V Wiring Harness, Main 230V Wiring Harness, Compressor Wiring Harness, Water Bath Wiring Harness, Cabinet Fan Wire Tie (Use as required) Gasket, 18.0" U-channel (Late Models)(Use as required)

58 BUNN REFILLABLE CONTAINER ASSEMBLY JDF P

59 REFILLABLE CONTAINER ASSEMBLY ITEM PART NO. QTY. DESCRIPTION Container Assy (Includes items 1-9) Container w/lid (Includes item 2) Lid (Order item 1) Fitting Assy (Includes items 4-9) Gasket Retaining Clip Spring Ball Fitting O-ring

60 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , , ,27,31, , ,19, ,31, ,7,55, , ,7,13, , , ,33, , ,9, ,29, , ,13,27, ,39, ,15, ,45, , , ,51, , ,27,31, , , , , , ,37,39,45, , ,17,29, ,37,39, , ,35,37,39, , ,29,31,33,

61 , , ,17, ,15,27, ,13, , ,37,39, , , , ,13, , , , , , ,31 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO M M M M ,35,43,