Product range overview of Walter Thread System / Walter Capto TM
|
|
- Loraine Owens
- 5 years ago
- Views:
Transcription
1 A 276
2 Product range overview o Walter Thread System / Walter Capto TM Threading External machining Internal machining Walter NTS Walter Capto TM Walter NTS Walter Capto TM NTS SE NTS I h = Page A 280 = Page A 283 NTS SE NTS SI Normal position Walter Capto TM Page A 281 Normal position Walter Capto TM Page A 284 NTS OE NTS OI Inverted position Walter Capto TM Page A 282 Inverted position Walter Capto TM Page A 285 A 277
3 key or Walter Thread System Example or external machining NTS S E L Example or internal machining S 32 S NTS I R range position Version Version Shank Holder height h 1 [] NTS = Walter Thread System S O Standard position Overhead position E I External Internal R L Right-hand Let-hand h Shank design Boring bar diameter [] length [] A Solid steel design with internal coolant supply Shank diameter is shown in. Figures ater the decimal point are ignored. Single-digit integers are preceded by a 0. A 32 B 40 C 50 D 60 P 170 Q 180 R 200 S 250 S Solid steel design without internal coolant supply E 70 F 80 T 300 U 350 G 90 V 400 H 100 J 110 W 450 X Custom K 125 Y 500 L 140 M 150 N 160 A 278
4 Example o Walter Capto TM C4 NTS S E R Holder width b [] Cutting edge length l [] 1 dimension [] length [] d min dimension [] b d min 1 l l = 11 l = 16 l = Coupling size [] C = Walter Capto TM C3 = 32 C4 = 40 C5 = 50 C6 = 63 A 279
5 Walter NTS threading NTS-SE - external thread h=h 1 b Standard position NTS-SER/L ,2 22 h b NTS-SER/L NTS-SER/L ,6 30 NTS E NTS-SER/L ,6 30 NTS-SER/L ,6 34 NTS-SER/L ,7 36 NTS-SER/L ,7 36 NTS E NTS-SER/L ,7 36 h 1 Bodies and assembly parts are included in the scope o delivery. The toolholders listed are designed or an inclination angle o 1.5. For additional shims or gradient angle correction, see page A 324. NTSE NTSE Shim, let YE3 YE4 Clamping screw or threading insert or shim Torx key FS1050 (Torx 10) FS256 (Torx 20) A 67 A 280
6 Walter NTS Capto TM threading C - NTS-SE - external thread Walter Capto TM ISO Standard position C3-NTS-SER/L C C4-NTS-SER/L C C5-NTS-SER/L C NTS E -16 C6-NTS-SER/L C C4-NTS-SER/L C C5-NTS-SER/L C NTS E -22 C6-NTS-SER/L C Bodies and assembly parts are included in the scope o delivery. The toolholders listed are designed or an inclination angle o 1.5. For additional shims or gradient angle correction, see page A 324. NTS E -16 NTS E -22 Shim, let YE3 YE4 or shim Clamping screw or threading insert Torx key FS1050 (Torx 10) FS256 (Torx 20) Cooling lubricant nozzle C3 FS1230 Cooling lubricant nozzle C4 FS1018 FS1018 Cooling lubricant nozzle C5 FS1019 FS1019 Cooling lubricant nozzle C6 FS1019 FS1019 A 67 A 281
7 Walter NTS Capto TM threading C -NTS-OE - external thread Walter Capto TM ISO Overhead position C3-NTS-OER/L C C4-NTS-OER/L C C5-NTS-OER/L C C6-NTS-OER/L C C4-NTS-OER/L C C5-NTS-OER/L C C6-NTS-OER/L C NTS E -16 NTS E -22 Bodies and assembly parts are included in the scope o delivery. The toolholders listed are designed or an inclination angle o 1.5. For additional shims or gradient angle correction, see page A 324. NTS E -16 NTS E -22 Shim, let YE3 YE4 or shim Clamping screw or threading insert Torx key FS1050 (Torx 10) FS256 (Torx 20) Cooling lubricant nozzle C3 FS1230 Cooling lubricant nozzle C4 FS1230 FS1230 Cooling lubricant nozzle C5 FS1230 FS1230 Cooling lubricant nozzle C6 FS1230 FS1230 A 67 A 282
8 Walter NTS threading A -NTS-I / S -NTS-I - internal thread h Standard position A20Q-NTS-IR/L , Version A -NTS-I A20Q-NTS-IR/L , A20Q-NTS-IR/L , NTS I -11 h A20Q-NTS-IR/L , NTS I -16 S16M-NTS-IR/L ,3 15, S20Q-NTS-IR/L , S20Q-NTS-IR/L , S20Q-NTS-IR/L , S25R-NTS-IR/L ,1 22, S32S-NTS-IR/L , NTS I -16 Version S -NTS-I S32S-NTS-IR/L , S40T-NTS-IR/L , S20Q-NTS-IR/L , S25R-NTS-IR/L ,2 22, h S32S-NTS-IR/L , S32S-NTS-IR/L , S40T-NTS-IR/L , NTS I -22 Bodies and assembly parts are included in the scope o delivery. The toolholders listed are designed or an inclination angle o 1.5. For additional shims or gradient angle correction, see page A 324. NTS I -11 NTS I -16 NTS I -22 Shim, let YE3 YE4 Clamping screw or threading insert or shim FS2174 (Torx 8) 0,9 Nm Torx key FS257 (Torx 8) FS1050 (Torx 10) FS256 (Torx 20) A 68 A 283
9 Walter NTS Capto TM threading C -NTS-SI - internal thread Walter Capto TM ISO Standard position 6 d 2 Bodies and assembly parts are included in the scope o delivery. The toolholders listed are designed or an inclination angle o 1.5. For additional shims or gradient angle correction, see page A 324. C3-NTS-SIR/L C C4-NTS-SIR/L C C5-NTS-SIR/L C C6-NTS-SIR/L C C4-NTS-SIR/L ,5 C C5-NTS-SIR/L C C6-NTS-SIR/L C C4-NTS-SIR/L ,5 C C5-NTS-SIR/L ,5 C C6-NTS-SIR/L ,5 C C4-NTS-SIR/L ,5 C C5-NTS-SIR/L C C6-NTS-SIR/L C d 2 6 NTSI -16 NTSI -22 NTSI -16 NTSI -22 Shim, let YE3 YE4 Clamping screw or threading insert or shim Torx key FS1050 (Torx 10) FS256 (Torx 20) A 68 A 290
10 Walter NTS Capto TM threading C -NTS-OI - internal thread Walter Capto TM ISO Overhead position 6 d 2 Bodies and assembly parts are included in the scope o delivery. The toolholders listed are designed or an inclination angle o 1.5. For additional shims or gradient angle correction, see page A 324. C3-NTS-OIR/L C C4-NTS-OIR/L C C5-NTS-OIR/L C C6-NTS-OIR/L C C4-NTS-OIR/L ,5 C C5-NTS-OIR/L C C6-NTS-OIR/L C C4-NTS-OIR/L ,5 C C5-NTS-OIR/L ,5 C C6-NTS-OIR/L ,5 C C4-NTS-OIR/L ,5 C C5-NTS-OIR/L C C6-NTS-OIR/L C d 2 6 NTSI -16 NTSI -22 NTSI -16 NTSI -22 Shim, let YE3 YE4 Clamping screw or threading insert or shim Torx key FS1050 (Torx 10) FS256 (Torx 20) A 68 A 291
CMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationMULTI-TASK MACHINING. Tooling possibilities Products
Content Tooling possibilities Products Toolholder overview Coromant Capto multi-functional tools CoroPlex MT - milling and turning tool CoroPlex TT - turning tool CoroPlex SL mini-turret CoroTurn P - Coromant
More informationBU10P with through coolant supply
GROOVING and BORING TOOLOLER BU with through coolant supply epth of groove up to Width of groove up to.354.118.118 Material of shank: Carbide - Giving a good vibration resistance for use with Insert Part
More informationNew Mini Tools Inch 2016
TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationWhat is HSK-T? HSK T. Feature. Compatible with HSK-A. Increased cutting accuracy at turning process. Compatible
What is HSK-T? HSK-T interface was developed to maximize cutting ability of multi-tasking machines. HSK-T interface became ISO standard (ISO121 164-3:2008) in 2008. Feature Compatible with HSK-A HSK-T
More information-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
More informationCoromant U. Indexable insert drill DRILLING. A productivity tool for cost efficient hole production. Drill adaptor for silent drilling E 53
Coromant U Indexable insert drill General Turning A productivity tool for cost efficient hole production Designed with optimal flute area for max chip flow Chip evacuation optimized for high metal removal
More informationPRECI-FLEX. The Flexible Tool System
PRECI-FLEX The Flexible Tool System EXSYS Tool, Inc. T:800.397.9748 F:800.397.9739 P:352.588.4345 www.mazaktooling.com CONTACT INFORMATION TABLE OF CONTENTS Main Distribution for USA Mexico Canada Repair
More informationAccessories. Other Accessories
.01 Wrenches.03 Wrench Heads.04 Torque Wrenches.05 Features and Benefits of Counter Nut.05 CM/ER Counter Nut.06 Trays for Collet Sets.06 Trays for Sealing Disk Sets.07 Clamping Units PGU/PGC Other.09 WMB
More informationSpindle & Taper Care Products
Spindle & Taper Care Products Swiss Precision Tools UltraSonic Cleaner Ultrasonic Cleaner Ultrasonic Cleaning Solution US-40SE US-815CLEAN Heavy duty stainless steel double-wall design provides highly
More informationMULTI-TASK MACHINING. Tooling possibilities Products
Content MULT-TASK MACNNG MULT-TASK MACNNG Tooling possibilities Products Tool holder overview Coromant Capto multifunctional tools CoroPlex MT - milling and turning tool CoroPlex TT - turning tool CoroPlex
More informationBMT 65 TOOLING BENZTOOLING.COM
BMT 65 TOOLING BENZTOOLING.COM Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s
More informationSTEADYLINE FOR TURNING & MILLING REDUCE VIBRATIONS & INCREASE PRODUCTIVITY
STEADYLINE FOR TURNING & MILLING REDUCE VIBRATIONS & INCREASE PRODUCTIVITY OVERCOME TOOL OVERHANG CHALLENGES When using long overhang tools to machine difficult-to-access areas, such as deep cavities or
More informationTechleader Clearance Items Qty. Order No. Description Price
Techleader Clearance Items Qty. Order No. Description Price Collets 16C 4 160-056-SE 16C 7/8" Round Serrated Collet $40.95ea 2 160-004 16C 1/16" Round Smooth Collet $34.50ea KATO TC TAP COLLETS 1 810-101
More informationPENCIL DESIGN. Hydraulic high precision toolholder Pencil version. Benefits and features
PENCIL DESIGN Benefits and features For drilling to finishing Pencil design enabling machining in deep cavities and complex components Special designs possibility High clamping force 6 Nm is with its extreme
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
More informationFor Extra Large Pitches METRIC
or Extra arge Pitches METRIC or Extra arge Pitches Up to 25mm or 1 tpi Unique Design for Heavy Duty Applications VKX Vargus Tough Submicron Grade Inserts Anti-Rotation Stopper Toolholder Support Suited
More informationStub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationQuick change for vertical lathes
Quick change for vertical lathes VTL brochure_a4_v4.indd 1 Machine utilization Metal cutting efficiency Vertical turning lathes, or VTLs, are one of the most traditional machine types, table diameters
More informationHSK TOOLING N1 - N16 N2 - N10 HSK TOOLING N11 - N12 QUICK CHANGE SYSTEM N13 - N16 CARTRIDGE R38 LEVER LOCK PARTS COMPATIBILITY
HSK OOLIG 1-16 HSK OOLIG 2-10 HSK- OOLIG (ICM Standard) 2 QUICK CHGE SYSEM 11-12 KQC Flower Petal dapter 11 CRRIDGE 13-16 LEVER LOCK PS / P 14 OP CLMP C 15 SCREW CLMP S 16 LEVER LOCK PRS COMPIILIY R38
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationA global range. Extra hard for extra performance: the extra hard Bosch bits. Equipped for any application
Screwdriving 146 Screwdriving Overview Bosch Accessories 11/12 A global range Bosch shows how it s done. With a universal and comprehensive screwdriver bit range which has a bit to suit every application
More informationThreadMill. For Thread Milling
ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
More informationHCG - HORN Catalog Guide
CG - ORN Catalog Guide INTERNAL GROOVING Product line ore Ø 217 S274 S223 S224 231 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation
More informationpowrgrip for mold & die Trustworthy toolholding solutions
powrgrip for mold & die Trustworthy toolholding solutions REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Medical/Dental Introduction 01 Features and
More informationLST SERIES PART POSITIONER
ISO 9001 REGISTERED LST SERIES PART POSITIONER ONE ACTUATOR TO ETEND AND TIP TOOLING AWAY REPEATABLE RETRACTED POSITION CHOICE OF TIP ANGLES* 11, 22, 31, 39, 45 TREATED STEEL TIP PLATE WITH TAPPED HOLES/DOWELS
More informationRemoving and Installing Injection Nozzle
07.1-6810 Removing and Installing Injection Nozzle Operation no. of operation texts and work units or standard texts and flat rates: 07-6810 Hose clip (F only) (51) Leak oil hose (50), plug (52) Injection
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationToolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available
Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationTM T.O. 38G
T.O. 38G1-48-12-2-1 TECHNICAL MANUAL VOLUME 2 OF 2 PART 1 OF 2 MAINTENANCE DIRECT SUPPORT AND GENERAL SUPPORT LEVEL ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED,
More informationDRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
More informationPARTS MANUAL SUPPORTED BY HUSTLER TURF EQUIPMENT AND EXCEL INDUSTRIES, INC.
SHIBAURA DIESEL ENGINE MODEL: N843 and N843L PARTS MANUAL SUPPORTED BY HUSTLER TURF EQUIPMENT AND EXCEL INDUSTRIES, INC. Table of Contents Chapter 1 General Information....................................
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS 1. DESCRIPTION: Trailer Tow mirror kit (with power and heated) Trailer Tow mirror kit (with power, heated, and memory) 2. APPLICATION: 04 Titan, Armada, QX56 LE,
More informationShrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
More informationApril 2017 TOOLING FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory of lathe
More informationU-CENTER. NC heads for facing, boring, threading and radiusing for machining centres
U-CENTER NC heads for facing, boring, threading and radiusing for machining centres 8 U-CENTER General features o + 4 1 A U-CENTER U-CENTER boring and facing heads are designed for use on machines with
More informationNAKAMURA TOME LIVE TOOLING
NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000
More informationHSK-T TOOLING SYSTEMS for TURNING MILL. World standard ISO. for Turning Mill SET SCREW HOLDERS FOR ROUND SHANK INSERT HOLDERS FOR SQUARE-SHANK
HSK-T TOOING SYSTES for TURNING I SET SCREW HODERS FOR ROUND SHANK For through-spindle coolant CC type For nozzle-coolant CN type P. 71 World standard ISO for Turning ill INSERT HODERS FOR SUARE-SHANK
More informationBimetal Thermowells Threaded
Bimetal Threaded Stepped Shank P P EXTERNAL THREAD [7] 2 1 / 2 only.75.75 [19] Lagging fl.50 Ø.50 [13] 1/2 P EXTERNAL THREAD P EXTERNAL THREAD [7] P P EXTERNAL THREAD THREAD.260 Ø.260 [7] [7].40.40 [10]
More informationJuly 2018 ONLY FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
More informationRefinishing precombustion chamber sealing surface
01-410 Refinishing precombustion chamber sealing surface Preceding work: Nozzle holder removed (01-417). Precombustion chamber removed (01-417). Operation no. of the operation texts and work units or standard
More informationWe do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads»
» Cutting Tools» Angle Heads» We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Table of Contents Cutting
More informationBERCO S.p.A. Via 1 Maggio, Copparo (FE) Italy Tel Fax
ISO 9001 Cert. n. 0029/4 ISO 14001 Cert. n. 0009A/0 All manufacturers s names, numbers, symbols and descriptions are used for reference purposes only. All parts listed are of Berco original production.the
More informationCAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG
powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders
More informationAugust 2018 ONLY FOR MULTUS U3000/U4000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA August 2018 MULTUS U3000/U4000/U5000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the
More informationCALL US WITH YOUR MACHINE MAKE & MODEL. WHETHER YOU NEED COOLANT THRU OR SOLID, WE WILL FIND THE RETENTION KNOB FOR YOU!
RETENTION KNOBS For CAT40, CAT50, BT0, BT40 & BT50 CAT40 Retention Knobs 5/8 Description DWG. T A L HOLE? Socket X70A 40EA / A45.440(C.8) A A.65 45.5 Y RKW40 X70A 40EA / A45.440 A A.65 45.5 N RKW40 X704A
More informationUPE/SPE SERIES PART EJECTOR ONE ACTUATOR TO LIFT AND TIP TO EJECT
ISO 9001 REGISTERED UPE/SPE SERIES PART EJECTOR ONE ACTUATOR TO LIFT AND TIP TO EJECT OPTIONAL TIP ANGLES 11, 22, 31, 39, 45 TREATED STEEL TIP PLATE WITH TAPPED HOLES/DOWELS & KEY FOR TOOLING WORLD SWITCH
More informationApril 2017 TOOLING FOR MULTUS U3000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 MULTUS U3000/U4000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
More informationFeed separators HPVS
Key features and peripherals overview At a glance 1 Corrosion-resistant thanks to stainless steel plunger 2 Optimum and precise adaption options using centring sleeves 3 Supply ports optionally on top
More informationHeimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12
1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested
More informationArbours for PSC Polygon Shank Tooling
Arbours for Polygon Tooling CAT V-FLANGE to Taper CV 40 Designation L L1 kg SPECIAL CV40ADB--1.57 1.57.827.95 CV40ADB-50-1.97 50 1.97 1.22 1.00-69871 -AD Taper to Designation L L1 kg SPECIAL 40 69871-A40-50-1.18
More informationNAME OF TRADE :- WELDER MAKE/ MODEL SPECIFICATION. 400A capacity with air cooled. 25 mm No. 15 KVA No
SI NO NAME OF TRADE :- WELDER WITH 1 D.C Arc welding rectifiers set with all accessories (400 A. OCV 60 100 V, 60% duty cycle ) 2 GMAW welding machine 400A capacity with air cooled torch, Regulator, Gas
More informationREMOVING CYLINDER HEAD COVER (VALVE COVER) - AS OF MY 2004 (CAYENNE TIP, CAYENNE MAN) > PRELIMINARY WORK > PRELIMINARY WORK
Page 1 of 9 CYLINDER HEAD, VALVE DRIVE 15 82 21 REMOVING CYLINDER HEAD COVER (VALVE COVER) - AS OF MY 2004 (CAYENNE TIP, CAYENNE MAN) > PRELIMINARY WORK > PRELIMINARY WORK 1. Remove engine compartment
More informationRadial Drilling And Milling Heads TYPE HAAS
Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106
More informationJuly 2018 ONLY FOR LU3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LU3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest
More information1. (a) B2 for (B1 for 5.29 seen) (b) (i) 2 ( ) = B1 for ( )
1. (a) 4.232 2 B2 for 4.232 (B1 for 5.29 seen) (b) (i) 2 (14.5 2.6) 4.5 3.6 = 49.95 B1 for (14.5 2.6) 4.5 3.6 (ii) (14.5 2.6) (4.5 3.6) = 10.71 B1 for (14.5 2.6) (4.5 3.6) 2. 7.75 10 5 2 B2 for 7.75 10
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationContents. Milling. Solid end mills
UPDATE 2016-2 SOLUTIONS & SUPPORT By choosing Seco, you get more than just a comprehensive portfolio of advanced metal-cutting solutions and expert services. You get a partnership based on trust, respect
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationCPN2.4 SENSOR REPLACEMENT PROCEDURES FOR CRS FOR MITSUBISHI FUSO 6M70
PUMP MITSUBISHI S.I. 497 1 / 5 CPN2.4 SENSOR REPLACEMENT PROCEDURES FOR CRS FOR MITSUBISHI FUSO 6M70 This service information bulletin describes the replacement procedures for the fuel temperature sensor,
More informationMODEL SUPER P Parts List
MODEL Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 05/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway
More informationJuly 2018 ONLY FOR LT2000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT2000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
More informationUPE/SPE SERIES PART EJECTOR ONE ACTUATOR TO LIFT AND TIP TO EJECT
ISO 9001 REGISTERED UPE/SPE SERIES PART EJECTOR ONE ACTUATOR TO LIFT AND TIP TO EJECT OPTIONAL TIP ANGLES 11, 22, 31, 39, 45 TREATED STEEL TIP PLATE WITH TAPPED HOLES/DOWELS & KEY FOR TOOLING WORLD SWITCH
More informationLathe Tool Holders. Catalog Number Gage Insert H B H1 L F L1 Shim Options Right Hand Left Hand Shank. Shank Width ±.15. Height ±.10. Shank Width ±.
Lathe Tool Holders DCLNR/L - CNMG, 80 Diamond This tool is designed for turning and facing applications where cutting loads are heavy. The DWLNR/L or GWLNR/L is more economical (6 tips per insert) if insert
More informationBENZ Shaped Profile Tooling on a Haas DS30 SSY Turret.
BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret www.benztooling.com March 2015 Table of Contents Live Tools ST 10 (Y) ST 20 (Y) ST25 (Y) ST 30 (Y) ST 35 (Y) DS 30 (Y) ST 20 SS (Y) ST 30 SS (Y) DS
More informationFMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
More informationSR-SAF Ball nose roughing endmill
/ BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.
More informationSTANDARD FASTENER TOOLS
STANDARD FASTENER TOOS STANDARD FASTENER TOOS Connect your tool to the application with Bits, Sockets and Nutsetters from AIMCO. AIMCO has assembled the most complete package of commonly used screwdriver
More informationR D. Brackets Type Material Shaft D E F K R S T U X set mm mm mm mm mm mm mm mm mm mm Article N
Mounting Brackets for Interroll rum Motors 80s 113s rum Motor Bracket: ROHS chrome passivated mild steel or stainless steel R E K X T S rum Motor Brackets Brackets Type Material Shaft E K R S T X set mm
More informationCnC woodworking Collets
CnC woodworking Collets SE00- SE0- SE0 Nut SyoZ 0 FoR woodworking MAChIneS (RDo0) This collet used on.hp and HP dual end Perske motors Description Length Inside SE00-0mm SYOZ 0 mm Collet 0 mm SE00- SYOZ
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationExtremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
More informationDriven Toolholders for HAAS Machines
riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE Tale of Contents Type Page riven Toolholders SL 20 / SL 30 8-11 Modular Tool
More informationThe EPA07 Series 60 Workshop Manual has been revised. Listed in Table 1 are the revisions.
NUMBER: 08 60-6 S.M. REF.: 2.3.1 and 2.3.2 ENGINE: EPA07 Series 60 DATE: September 2008 SUBJECT: E3 INJECTOR TUBE PUBLICATION: DDC-SVC-MAN-0005 The EPA07 Series 60 Workshop Manual has been revised. Listed
More informationJuly 2017 TOOLING FOR GENOS L300/L3000 BMT. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR July 2017 GENOS L300/L3000 BMT www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest
More informationMM: Bild angeben Content 690 V AC for baseplate, busbar and supporting rail mounting 60 Accessories 62 Technical Data see page 65 NU System The EFEN s
Basic Efficiency up to 1500 V 1-pole 3-pole SILAS MM: Bild angeben Content 690 V AC for baseplate, busbar and supporting rail mounting 60 Accessories 62 Technical Data see page 65 NU System The EFEN successfully
More informationCHASERS. number of teeth For holders see pg. 64 No. of EDP Code TPI TPF L A T Teeth
haser Insert omenclature hart SERS R 5 75 3 E #1 G3 SERS chaser pitch (I) 5 8 10 thread type R taper 75 3/4 1 1 Round ational ipe hd cutting type I E number of teeth 3 4 5 7 set number grade edge prep
More informationgas passes through baffle plates in cylinder oil separator inlet port. Separated oil returns The first separation will happen when blowby
2 05 LAYOUT AND OVERVIEW Lubrication System PCV Oil Separator Cylinder head cover (oil + gas) Blow-by gas (air duct hose) Inlet port Oil (oil gauge pipe) The first separation will happen when blowby gas
More informationGSW-V. Application example. Special Gripper Vacuum Gripper. Weight 0.12 kg 0.39 kg. Clamping diameter 20 mm 32 mm
GSW-V Suction pad diameter 30 mm 125 mm Clamping diameter 20 mm 32 mm Weight 0.12 kg 0.39 kg Gripping force 55 N 980 N Workpiece weight 0.28 kg 4.9 kg Application example Handling of gears in a milling
More informationBMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
More informationNUMBER: S.M. REF.: Listed in Table ENGINE: EPA07 Series 60 DATE: June 2012 SUBJECT: E3 FUEL INJECTOR TUBE ADDITIONS, REVISIONS, OR UPDATES
NUMBER: 6 25 12 S.M. REF.: Listed in Table ENGINE: EPA07 Series 60 DATE: June 2012 SUBJECT: E3 FUEL INJECTOR TUBE ADDITIONS, REVISIONS, OR UPDATES Publication Number Platform Section Title Change E3 Fuel
More informationSHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
More informationCost effective. Productive. Compliant. GSW-M Magnetic Gripper
Cost effective. Productive. Compliant. Magnetic Gripper Vacuum gripper for spindle interfaces is ideal for handling flat components. Field of Application Unit for automatic loading and unloading of machining
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationThreading. Stellram offers high performance grades suitable for all machining applications, in a wide range of materials, for maximum productivity.
Threading Stellram s comprehensive threading program is available in a wide range of thread forms. artial and full pro le inserts are offered for thread turning. Stellram offers high performance grades
More informationHD Hinge Casting HARDWARE: CONTENTS:
Page 1/9 Part #11546.51 CONTENTS: HD Hinge Casting Spacer Plates (2 PCS) HD Hinge Casting HARDWARE: Hex Bolt X 4 Washer X 4 TOOLS REQUIRED: Socket Wrench 10 extension 13mm socket 3/4 deep socket T-20,
More information-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
More informationOctober 2017 TOOLING FOR LB2000/LB3000 M/MY/MYW. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR October 2017 LB2000/LB3000 M/MY/MYW www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
More informationHCG - HORN Catalog Guide
Product line Bore Ø 217 264 S274 S223 S224 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation Type HCG - HORN Catalog Guide INTERNAL
More informationTSI Date Group No. Supp. Page
Volvo Trucks North America, Inc. Greensboro, NC USA Timing Gear Cover TSI Date Group No. Supp. Page 11.2001 215 006 1(7) Timing Gear Cover D12C Fig. 1: VOLVO D12C Engine W2003244 This information covers
More informationA new dimension in forklift truck performance. Forklift Truck Series. Diesel & Gasoline tons
A new dimension in forklift truck performance Diesel & Gasoline Forklift Truck Series 3.5-5.0 tons Creating a new dimension in forklift truck performance with a full complement of standard features The
More informationEngine, disassembling and
Page 1 of 38 13-1 Engine, disassembling and assembling Lock carrier, moving into service position Special tools and equipment 3369 support tool 1 - Bolts 2 - Bolts 3 - Bolts 4 - Bolts 5 - Bore 45 Nm (33
More informationASM. Asynchronous Spindle. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom
NE ASM Asynchronous Spindle Motors SEM Limited Faraday Way Orpington, Kent BR 3QT United Kingdom Tel: +44 ()1689 8847 Fax: +44 ()1689 884884 Email: sales@sem.co.uk Web: www.sem.co.uk Version 2.1 June 211
More information