HCG - HORN Catalog Guide
|
|
- Myrtle Morrison
- 5 years ago
- Views:
Transcription
1 Product line Bore Ø S274 S223 S224 S229/229 S312/ S (15.87 mm).709 ( 18 mm) (20-28 mm) (28-38 mm) > (38 mm) Operation Type HCG - HORN Catalog Guide INTERNAL GROOVING Grooving Threading Profiling Width of groove inch Width of groove mm Chapter A B C D E G H J K Depth of groove Product line up to S274 S223 S224 S229/229 S312/ S (4 mm).236 (6 mm).315 (8 mm).394 (10 mm).433 (11 mm).551 (14 mm).630 (16 mm).709 (18 mm).984 (25 mm) (25.4 mm) Operation Type EXTERNAL GROOVING Grooving Side Turning Parting Off Threading Profiling Axial Grooving Width of groove inch Width of groove mm Chapter A B C D E G H J K Special tools upon request
2 SUMMARY TOOLING SYSTEMS Grooving - external - Page 2-3 Grooving - internal - Page 4-5 ace Grooving Page 8-9 Page Indexable inserts Type Grooving Page 6-7 ace Grooving Page 12 metric trapezoidal thread Page 13 or Technical Information please see chapter Q 1
3 GROOVING (external) TOOLHOLDER Type 211 Clamping range up to.433 (11.0 mm).197 (5.0 mm) for use with Indexable insert Type R = right hand version shown L = left hand version Part number h b l 1 h 1 f 1 f l 2 t max Size Clamping range R/L R/L f 1 +w-a R/L R/L R/L f 1 +w-a R/L R/L R/L f 1 +w-a R/L State R or L version w, a 1 see indexable inserts Dimensions in mm urther sizes upon request Spare parts Toolholder Clamp Screw Wrench R/L SW3DIN911 R/L SW3DIN911 R/L SW3DIN911 2
4 GROOVING (external) TOOLHOLDER Type 211 Clamping range up to.433 (11.0 mm).394 (10.0 mm) for use with Indexable insert Type R = right hand version shown L = left hand version Part number h b l 1 h 1 f 1 f l 2 t max Size Clamping range R/L R/L f 1 +w-a R/L R/L R/L f 1 +w-a R/L R/L R/L f 1 +w-a R/L State R or L version w, a 1 see indexable inserts Dimensions in mm urther sizes upon request Spare parts Toolholder Clamp Screw Wrench R/L SW3DIN911 3
5 GROOVING (internal) CARTRIDGE Type 208 Bore Ø from Clamping range up to (75.0 mm).394 (10.0 mm) for use with Indexable insert Type R = right hand version shown L = left hand version Part number h 1 f h b l 1 e 1 l 2 c Size Clamping range R/L R/L R/L R/L State R or L version w see indexable inserts Dimensions in mm urther sizes upon request Spare parts Cartridge Clamp Screw Screw Axial Setscrew Radial Setscrew Wrench R/L K SW3DIN911 4
6 GROOVING (internal) SEATING DIMENSIONS CARTRIDGE Type 208 R = right hand version shown L = left hand version Cartridge G H K E B h 1 D min astening screw R/L M State R or L version Dimensions in mm 5
7 GROOVING (external) INDEXABLE INSERT Type with round chip breaker Width of groove for use with Toolholder Type 211 R = right hand version shown L = left hand version Part number w a 1 α γ λ Size K10 P20 TN32 T45 TC92 R/L / / R/L / on stock Δ 4 weeks P main recommendation M ο alternative recommendation K uncoated grades S coated grades N brazed/cermet H Dimensions in inch Carbide grades State R or L version Use right hand inserts in right hand toolholders and left hand inserts in left hand toolholders 6
8 GROOVING (external and internal) INDEXABLE INSERT Type with round chip breaker Width of groove for use with Toolholder Type Part number w a 1 α γ λ Toolholder Size K10 P20 TN32 T45 TC /11 20 /15 20 /15 211/ /11 20 /15 20 /15 211/ /11 20 /15 20 /15 211/ /11 20 /15 20 /15 211/ on stock Δ 4 weeks P main recommendation M ο ο alternative recommendation K uncoated grades S ο coated grades N brazed/cermet H Dimensions in inch Indexable inserts can be used in right and left hand toolholders. Carbide grades 7
9 ACE GROOVING TOOLHOLDER Type U221 from outer groove Ø Clamping range up to for use with Indexable insert Type N R = right hand version shown L = left hand version Part number h h 1 l 1 b b 1 b 2 f t max a Size Clamping range R/LU R/LU R/LU R/LU R/LU R/LU R/LU R/LU State R or L version w see indexable inserts Dimensions in inch urther sizes upon request Spare parts Toolholder Clamp Screw Position Pin R/LU
10 ACE GROOVING TOOLHOLDER Type 221 from outer groove Ø Clamping range (40.0 mm).315 (8.0 mm) ( mm) for use with Indexable insert Type N R = right hand version shown L = left hand version Part number h h 1 l 1 b b 1 b 2 f t max a Size Clamping range R/L R/L R/L R/L R/L R/L R/L R/L State R or L version w see indexable inserts Dimensions in mm urther sizes upon request Spare parts Toolholder Clamp Screw Position Pin R/L
11 ACE GROOVING TOOLHOLDER Type U228 from outer groove Ø Clamping range up to for use with Cassette Type N L = left hand version shown R = right hand version Part number l 1 l 2 h h 1 b f t max a Size Clamping range R/LU R/LU R/LU R/LU R/LU R/LU R/LU R/LU State R or L version w see indexable inserts Dimensions in inch urther sizes upon request Spare parts Toolholder Clamp Screw Position Pin R/LU
12 ACE GROOVING TOOLHOLDER Type 228 from outer groove Ø Clamping range up to (40.0 mm).315 (8.0 mm).394 (10.0 mm) for use with Indexable insert Type N L = left hand version shown R = right hand version Part number l 1 l 2 h h 1 b f t max a Size Clamping range R/L R/L R/L R/L R/L R/L R/L R/L State R or L version w see indexable inserts Dimensions in mm urther sizes upon request Spare parts Toolholder Clamp Screw Position Pin R/L
13 ACE GROOVING INDEXABLE INSERT Type /N with chip former from outer groove Ø Width of groove for use with Toolholder Type U221 U228 Indexability length ±.001" Part number w s r t max D a min Size TN32 TN35 TA45 R/L / R/L / R/L / N N Δ N N N on stock Δ 4 weeks P main recommendation M ο alternative recommendation K uncoated grades S coated grades N brazed/cermet H Dimensions in inch State R, L or N version Outer-Ø of groove < 40 mm upon request. Carbide grades 12
14 THREADING (external) ull profile INDEXABLE INSERT Type Pitch mm for use with Toolholder Type U221 U228 Metric ISO trapezoidal thread DIN 103 Part number P b s h 3 / h 4 Size MG12 TN35 TI25 TA on stock Δ 4 weeks P main recommendation M ο alternative recommendation K uncoated grades S coated grades N brazed/cermet H Dimensions in mm No shims necessary. All HORN thread profiles are manufactured with full ground radial clearance. Carbide grades 13
HCG - HORN Catalog Guide
CG - ORN Catalog Guide INTERNAL GROOVING Product line ore Ø 217 S274 S223 S224 231 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation
More informationBU10P with through coolant supply
GROOVING and BORING TOOLOLER BU with through coolant supply epth of groove up to Width of groove up to.354.118.118 Material of shank: Carbide - Giving a good vibration resistance for use with Insert Part
More information-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2017-03 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. Our products are sold through distributors
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2017-08 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationNew Mini Tools Inch 2016
TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer
More informationQuadCut. External. For Thread Turning
QuadCut External For Thread Turning Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
More informationGrooVical Precise Grooving & Turning Applications METRIC. Innovative Grooving & Turning Solutions
GrooVical Precise Grooving & Turning Applications METIC Innovative Grooving & Turning Solutions GrooVical Precise Grooving & Turning Applications New ange of Indexable Grooving Inserts The Groovical family
More informationQuadThread. Internal. For Thread Turning
QuadThread Internal For Thread Turning Scandinavian Tool Systems Scandinavian Tools System AB Our business idea is to offer the best rigid threading system to our customer and be in the front line of cutting
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationBoston Gear LOR Series
Boston Gear LOR Series Trig-O-Matic Lite Overload Release Clutch Installation and Maintenance Instructions Doc. No. LOR Series Trig-O-Matic Lite www.bostongear.com LOR SERIES TRIG-O-MATIC LITE OVERLOAD
More informationGrooving, Cut-Off, and Turning
Grooving, Cut-Off, and Turning Grooving Application Guide..........................................................................D2 D3 WMT Grooving, Cut-Off, and Turning................................................................D4
More informationReduced Chip Biting Issues when Grooving Small Parts
Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More information1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel SPIROLEX 10 / 3G NIHS For brass, traversing holes, with 2 helicoidal grooves. Helix at left, perfectly countersinking
More informationT-Max Q-Cut. System with 1 cutting edge PARTING AND GROOVING. For deep parting, internal grooving and small diameter face grooving
System with 1 cutting edge For deep parting, internal grooving and small diameter face grooving Toolholder assortment There are a wide range of different toolholders for inserts options - 151.2 for deep
More informationTOOLING FOR SWISS-TYPE CNC MACHINES. Ver
TOOLING FOR SWISS-TYPE CNC MACHINES www.genswiss.com Ver. 12.11 Introduction... Genevieve Swiss Industries provides tools & accessories unique to Swiss-Type Machining and Small Parts Manufacturing. Our
More information4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationMULTI-TASK MACHINING. Tooling possibilities Products
Content Tooling possibilities Products Toolholder overview Coromant Capto multi-functional tools CoroPlex MT - milling and turning tool CoroPlex TT - turning tool CoroPlex SL mini-turret CoroTurn P - Coromant
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationSTANDARD PROGRAMME Hydraulic Chucks
20 STANDARD PRORAMME STANDARD PRORAMME 23 Hydraulic Chuck ISO 7388-1, Form AD (prev. DIN 69871-AD), extra short design d 1 d 2 d 3 l3 ISO 7388-1 Form AD 3 µm h6 2.5 25000 min Nominal size SK/ISO Dimensions
More informationIndex SENSITIV T-TA SENSITIV T-TA. GENERAL FEATURES p COMPONENTS AND ASSEMBLY p SUPPLY p ARBORS p ACCESSORIES p.
Index SENSITIV T-T Boring and facing heads with manual and automatic feed SENSITIV T-T Boring and facing heads with manual and automatic feed GENERL ETURES p. 120 COMPONENTS N SSEMBLY p. 121 SUPPLY p.
More informationTWIN-SAF SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING TN-P00 GROOVING TN-P00 TURNING TN-P00 PROFILING TN-F00 TN-F90 FACE GROOVING
/ PARTING & GROOVING / PROGRAM OVERVIE TIN-SAF SYSTEM PARTING TN-P00 TN-B02 48 380 Shank... p 172 Blade... p 176 Blade holde. p 177 p 169 p 171 GROOVING TN-P00 28 38 48 88 380 Shank... p 172 p 168 p 168
More informationEdge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation
Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11
More informationProduct Catalogue 835. Smart Solutions on the Cutting Edge
Product Catalogue 835 Smart Solutions on the Cutting Edge 1 2 The World of WhizCut Smart Solutions on the Cutting Edge Demand on production for small parts around the world is continuously increasing.
More informationMilling. Widia s New M1200 Face Mill Program. Introducing... NEW!
Milling Introducing... Widia s New M1200 Face Mill Program NEW! specifically engineered to deliver consistent performance in demanding face-milling applications! Use less horsepower and gain up to 30%
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More informationTHREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
More informationMINI CATALOGUE inserts tool holders spares
MINI CATALOGUE inserts tool holders spares T O O L I N G F O R O I L & G A S A U T O M O T I V E A E R O S PA C E G E N E R A L E N G I N E E R I N G Established in Washington on the North East coast of
More informationUSE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
More informationMönninghoff electromagnetic tooth clutches
Mönninghoff electromagnetic tooth clutches High torque without slip in compact size Angular synchronisation of input to output possible Torque limiting and other special tooth options readily available
More informationSEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance
Product News No.492 Grooving / Cut-off Tools EC-Grooving Tool s 12-017 (GND型) -7$ (&2 352'8&7 ష෭ Ӥ أܞ ܞ Ӕ -7$ գ ଳཋ ട (GNDI型) table Machining through Outstanding Chip Control and Chattering Resistance Performance
More informationDümmel. BROACHING Minimill. premium carbide cutting tools. KEYWAYS IN THE RANGE OF 2-20 mm AND HEXAGON. Express Delivery Only Item. Ultramini.
E Ultramini Minicut System DED / System ZTP Tool Holders Rotaline Mikromill BROACHING Minimill KEYWAYS IN THE RANGE OF 2-20 mm AND HEXAGON System 0 Swissline premium carbide cutting tools Express Delivery
More informationFor Extra Large Pitches METRIC
or Extra arge Pitches METRIC or Extra arge Pitches Up to 25mm or 1 tpi Unique Design for Heavy Duty Applications VKX Vargus Tough Submicron Grade Inserts Anti-Rotation Stopper Toolholder Support Suited
More informationSteel / Cast iron body Independent chucks
Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design
More informationHead BKA1923F BKA2528F BKA3236 BKA4045 BKA1923F BKA2528F BT40-MD32F-100 BKA3236 BT40-MD40F-115 BKA4045 BT40-MD50F-105 BKA5056 BKA6372 BT40-MD63F-110
FZ Micro Boring Bar BT - BKA MAS3-BT 1DIV. =ø0.02mm BT30 - BKA - 1 BKA - 1 1 BKA - 1 1 BKA - 1 1 BT - BKA - 1 L 1 1 BKA - 1 1 BKA - 160 160 BKA - 15 15 BKA56-175 175 BKA - 1 1 BKA - 0 0 Max.Boring Depth
More informationLOR Series Trig-O-Matic Lite Overload Release Clutch
LOR Series Trig-O-Matic Lite Overload Release Clutch P-3029-BG LOR Series Installation and Operation An Altra Industrial Motion Company Contents I. Introduction A. Operating Principle... 3 B. Torque Adjustment...
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationChuck size
URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck
More informationVG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete Range of Turning Solutions INC METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving VARGUS
More informationContents. Welcome to the GenSwiss e-catalog This Digital Document is entirely navigable by clicking the table of contents to the right
Welcome to the GenSwiss e-catalog This Digital Document is entirely navigable by clicking the table of contents to the right Click To Jump to Pages Each link will bring you to the first page of each product
More informationQUICK-ACTING JAW CHANGE SYSTEM
QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationSENSITIV T-TA. Boring and facing heads with manual and automatic feed
SENSITIV T-T Boring and facing heads with manual and automatic feed 8 SENSITIV T-T General features The line of T-T boring and facing heads is provided with radial feed movement of the radial slide while
More informationGBA. Grooving with 3 Cutting Edges. Smooth Chip Evacuation with Molded Chipbreaker
G Grooving with 3 Cutting Edges Smooth Chip Evacuation with Molded Chipbreaker Large Lineup of Chipbreakers and Grades Smooth Chip Control with GM Chipbreaker NEW ybrid N620 G Grooving with 3 Cutting Edges
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More information2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)
ENGINE, GENERAL 11 00 ENGINE IN GENERAL 2002-08 ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) ENGINE IN GENERAL Cylinder 4 Bore mm 77 (3.03) Stroke mm 85.8 (3.377) Effective displacement
More informationKENNAMETAL HERTEL FIX-PERFECT
KENNAMETAL HERTEL Contents Inserts Key to identification numers E 2 Summary of inserts E 3 Summary of chipreakers E 4 Summary of cutting grades E 6 Appication notes E 7 Inserts E 10 Bade toos Key to identification
More informationRotary inlets for pressurised oil, compressed air
Rotary inlets for pressurised oil, compressed air Product data sheets Rotary inlets for pressure oil, single channel 0086-010-size-160 9.03.00 Rotary inlets for pressure oil, two- channel 0088-226/326-size-010040
More informationKTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
More informationU-CENTER. NC heads for facing, boring, threading and radiusing for machining centres
U-CENTER NC heads for facing, boring, threading and radiusing for machining centres 8 U-CENTER General features o + 4 1 A U-CENTER U-CENTER boring and facing heads are designed for use on machines with
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationigubal Pivoting Bearings igubal Pivoting Bearings Phone Fax Easy to fit Extremely cost-effective
igubal igubal Easy to fit Extremely cost-effective Resistant to chemicals Light weight High strength 55.1 igubal Technical data igubal igus GmbH 51147 Cologne Internet www.igus.de E-mail info@igus.de The
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationNeedle Roller Bearings
Needle Roller Bearings INTERPRECISE Donath GmbH Ostring 2 90587 Obermichelbach Germany Phone +49-911-76630-0 Fax +49-911-76630-30 info@interprecise.de www.idc-bearings.com Needle roller bearings with flanges
More informationSeries 45 anti-rotation guide units
> Series 45 guide units CATALOGUE > Release 8.7 Series 45 anti-rotation guide units For cylinders DIN/ISO 6432 - ø2, 6, 20, 25mm For cylinders DIN/ISO 643 - ø32, 40, 50, 63, 80, 00mm» To be used with VDMA/
More informationNTN-SNR HYDRAULIC NUT HMV..EBF OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS Copyright NTN-SNR HMV_TS 1964gb1.04 TABLE OF CONTENTS 1. Safety Instructions... 2 2. Product Description... 3 2.1. Structure and equipment... 3 2.2. Connections / Bores... 4 2.3.
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool
1 HSS drilling Drilling 2 Solid carbide drilling 3 Indexable insert drilling 4 Reaming and Countersinking 5 HSS taps and dies Threading 6 Circular and Thread Milling 8 Turning Tools Turning 9 EcoCut 10
More informationADAPTER GEAR ASSEMBLIES PARTS LIST AND SERVICE MANUAL
ADAPTER GEAR ASSEMBLIES PARTS LIST AND SERVICE MANUAL Adapter Gear Assemblies are normally used to reverse rotation of the PTO output shaft and to clear mounting obstructions. Standard adapters will move
More informationCLASSICA Imperial pitch - CD MXL - XL - L - H - XH SYNCHRONOUS BELT - - CHD CD APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
CLASSICA Imperial pitch - CD Performance index The CLASSICA synchronous belt, being designed with imperial pitch, is a valid and economical alternative solution in low/medium torque transmission systems.
More informationGrooving & Threading. Featuring the. Kit Sale. SIGE Internal Grooving System. KTGF External Grooving System for Swiss Machines. KTNR Threading System
Grooving & hreading Kit Sale eaturing the SIGE Internal Grooving System KG External Grooving System for Swiss Machines KNR hreading System Bonus Offer! Buy 10 Cera-Notch Grooving Inserts in New MEGCO Grade
More informationStandard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
More informationHOLLFELDER CUTTING TOOLS. Special tooling for customer applications
HOLLFELDER CUTTING TOOLS Special tooling for customer applications HOLLFELDER-GÜHRING CUTTING TOOLS Your competent partner in the area of metal chip removal. At our two company locations in Nuremberg und
More informationTRI TOOL INC. TECHNICAL SPECIFICATION MODEL 636SB LOW PROFILE CLAMSHELL MARCH,1997
TRI TOOL INC. TECHNICAL SPECIFICATION MODEL 636SB LOW PROFILE CLAMSHELL MARCH,1997 MODEL 636SB Low Profile Clamshell Description: The 636SB Low Profile Clamshell is a split-frame pipe lathe for severing
More informationKOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools
KOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools Turning, Facing & Grooving System KOOL Cut Modular Turning, Facing & Grooving System-Technology KOOL Cut Graphic Index ---------------------------------------------------------------------------------------------------------------------------------
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationIndex U-CENTER U-CENTER. GENERAL FEATURES p U-DRIVE p ASSEMBLY p SIZES p CHIP REMOVAL CAPACITY p SUPPLY p.
Index NC heads for facing, boring, threading and radiusing for machining centres NC heads for facing, boring, threading and radiusing for machining centres GENERL FETURES p. - U-RIVE p. SSEMBLY p. SIZES
More informationTRI TOOL INC. TECHNICAL SPECIFICATION MODEL 610SB LOW PROFILE CLAMSHELL FEBRUARY, 1997
TRI TOOL INC. TECHNICAL SPECIFICATION MODEL 610SB LOW PROFILE CLAMSHELL FEBRUARY, 1997 MODEL 610SB Low Profile Clamshell Description: The 610SB Low Profile Clamshell is a split-frame pipe lathe for severing
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationTooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
More informationRoller chain idler sprocket units Idler pulley units
Roller chain idler sprocket units Idler pulley units Roller chain idler sprocket units, idler pulley units Page Product overview Roller chain idler sprocket units, idler pulley units... 334 Design and
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationCoromant U. Indexable insert drill DRILLING. A productivity tool for cost efficient hole production. Drill adaptor for silent drilling E 53
Coromant U Indexable insert drill General Turning A productivity tool for cost efficient hole production Designed with optimal flute area for max chip flow Chip evacuation optimized for high metal removal
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationGrooving Tool Holders GND Type
TOOLING NEWS E-112 P M K N S H Tool Holders Expansion 6 s of Chipbreakers Characteristics Wide range of application processes Applicable for grooving, turning, copying, facing, boring and cut-off. Achieving
More informationI.T ODT-N * series 50 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 1809 COUPLING TECHNICAL INFORMATION ISSUED
series 50 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 1809 COUPLING TECHNICAL INFORMATION I.T. 6482 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED 06-09
More informationExtremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationdrylin shafts drylin Shafts
Shafts 7 shaft materials to choose All also in supported versions Aluminium for low weight Stainless steel for high corrosion resistance Special machining Available from stock Diameters 6 50 mm 845 Shafts
More informationCOMPAC Dial Test Indicators
DIN 2270 and factory standard Rotating dial COMPAC Dial Test Indicators Essential for the workshop, but also in the inspection room or measuring laboratory Ideal for comparative measurement on a surface
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationIntroduction. Deep Groove Ball Bearings. Angular Contact Ball Bearings. 1
Introduction Deep Groove Ball Bearings At Axis, we build exceptionally close tolerances into our bearings. Instead of the usual ABEC 1, we manufacture every Axis bearing to meet or exceed ABEC 3 tolerances.
More informationHole Finishing.
Tool Selection Guide.................................................................K4 K5 Application Examples...............................................................K6 K92 Reaming Tools...................................................................K94
More informationSeries ZX. Cylinders > rodless cylinders > Technical details. Versions. Order code ZX- ** - ** - **** - **
Cylinders > rodless cylinders > Technical details Operating pressure Temperature range Medium 1... 8 bar -10 C... +70 C Filtered, oil-free and dried compressed air according to ISO 8573-1:2010, Class 7:2:4,
More informationDV Shank Tools DV40...F2 F37 DV50...F38 F71
DV Shank Tools DV40..................................................................................F2 F37 DV50.................................................................................F38 F71
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationSpare parts list. Hydraulic breakers RX Valid from serial number
Hydraulic breakers Valid from serial number 50 www.cp.com Contents Contents General information............................................................... 5....................................................................
More informationFor advanced drive technology CLAMPEX. Shaft-hub-connection. KTR Precision joints CLAMPEX
technology CLAMPEX Shaft-hub-connection CLAMPEX KTR Precision joints 227 technology Table of contents Page Brief information 228 Selection and calculation 25-255 CLAMPEX -Selection Shaft diameter = d 0
More informationHYDRAULIC NUT HMV..EBF
HYDRAULIC NUT HMV..EBF INSTRUCTIONS FOR USE www.ntn-snr.com With You Warning PRESSURE MAX HMV EBF 10-25 700 bar HMV EBF 26-40 550 bar HMV EBF 41-60 450 bar HMV EBF 62-100 400 bar HMV EBF 102-120 350 bar
More information