GrooVical Precise Grooving & Turning Applications METRIC. Innovative Grooving & Turning Solutions
|
|
- Lynn Wheeler
- 5 years ago
- Views:
Transcription
1 GrooVical Precise Grooving & Turning Applications METIC Innovative Grooving & Turning Solutions
2 GrooVical Precise Grooving & Turning Applications New ange of Indexable Grooving Inserts The Groovical family of products by Groovex offers improved solutions for internal and external grooving and turning applications. GVN26 and GV feature inserts with three cutting corners and a unique rigid clamping system for improved productivity. The new GVN style inserts offer new applications in the Groovical line, including Turning and Grooving chip former to form helical chips, new parting off tools, machining close to shoulders and LH toolholders. GVN26 = Groove Depths up to 5.5mm Ø26mm = Groove idths from mm w GV = Groove Depths up to 6.5mm Ø28.7mm Additional Corner Support = Groove idths from mm w 2
3 GrooVical Catalog Groovical Ordering Code System _ Page 3 INSETS Close to Shoulder Square Grooving & Turning Chip ormer Page 4 Close to Shoulder Square Grooving Page 5 Close to Shoulder ound Grooving Page 6 Close to Shoulder Parting Off _ Page 7 Square Grooving (GV) Page 8 ound Grooving (GV) _ Page 8 TOOLHOLDES Close to Shoulder External Toolholders Page 9 Close to Shoulder External Toolholders 90 Page 10 Close to Shoulder Internal Toolholders _ Page 11 External Toolholders (GV) _ Page 12 External Toolholders 90 (GV) _ Page 13 Internal Toolholders (GV) _ Page 13 GV Toolholder Limitations _ Page 14 TECHNICAL DATA ecommended Cutting Data _ Page 15 GrooVical Ordering Code System Groovical Inserts GVN T VTX 7 1- Insert Type GV - Groovical Neutral GVN - Groovical Close to Shoulder Groovical Toolholders GVN 1 E Circular Circumference 26-26mm mm H or LH - H L - LH N - H/LH Type of Application T - Turning & Grooving S - Square Grooving - ound Grooving P - Parting Off X - Special Profile Grooving idth 0.5 to 6.35mm 6 - Corner adius 0.0-1mm 7 - Carbide Grade VTX, VKX 1- Insert Type 2 - External / Internal 3 - H or LH 4 - Shank Size 5 - Insert Size 6 - or Insert idth: GV - Groovical Neutral GVN - Groovical Close to Shoulder E - External E90 - External 90 I - Internal - H L - LH 12, 16, 20, 25, 32, 40 mm mm mm
4 Close to Shoulder Square Grooving & Turning Chip ormer NE Ø26 Ø28.7 ight hand shown Insert Size Ordering Code Dimensions mm Grade Toolholder IC H/LH ±0.02 ±0.03 VKX VTX GVN26/LT GVN26/LT GVN26/LT GVN26/LT GVN/LT In stock Available upon request GVNE...-26, GVNE GVNE...--1, GVNE , GVNI...- Close to shoulder machining Turning and Grooving positive Chip ormer, preventing tangled chips around the workpiece Grooving up to 6.5mm depth 4
5 Close to Shoulder Square Grooving Ø26 Ø28.7 ight hand shown Insert Size Ordering Code Dimensions mm Grade Toolholder IC H/LH ±0.02 ±0.03 VKX VTX 26 In stock Available upon request GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN26/LS GVN/LS GVN/LS GVN/LS GVN/LS GVN/LS GVN/LS GVN/LS GVN/LS GVNE...-26, GVNE GVNE...--1, GVNE , GVNI...- GVNE...--2, GVNE , GVNI...- 5
6 Close to Shoulder ound Grooving Ø26 Ø28.7 ight hand shown Insert Size Ordering Code Dimensions mm Grade Toolholder IC H/LH ±0.02 ±0.03 VKX VTX 26 In stock Available upon request GVN26/L GVN26/L GVN26/ GVN26/ GVN26/ GVN26/ GVN26/ GVN26/ GVN/ GVN/ GVN/L GVN/L GVN/L GVNE...-26, GVNE GVNE...--1, GVNE , GVNI...- GVNE...--2, GVNE , GVNI...- 6
7 Close to Shoulder Parting Off Ø26 Ø28.7 ight hand shown α α Insert Size Ordering Code Dimensions mm Grade Toolholder IC H/LH ±0.02 ±0.03 αº VKX VTX 26 In stock Available upon request GVN26/LP GVN26/LP GVN26/LP GVN26/LP GVN26/LP GVN26/LP GVN/LP GVN/LP GVN/LP GVN/LP GVNE...-26, GVNE GVNE...--1, GVNE , GVNI...- 7
8 Square Grooving (GV) External Internal Ø28.7 ight hand shown Insert Size Ordering Code Dimensions mm Grade Toolholder IC H/LH ±0.02 ±0.03 VKX VTX In stock Available upon request GV/LS GV/LS GV/LS GV/LS GV S GV/LS GVE...--1, GVE , GVI...- GV/LS GVE...--2, GVE , GV/LS GV/LS GVI...-, GVNE...--2, GVNE , GVNI...- ound Grooving (GV) External Internal Ø28.7 ight hand shown Insert Size Ordering Code Dimensions mm Grade Toolholder IC H/LH ±0.02 ±0.03 VKX VTX In stock Available upon request GV/ GV/ GV/L GV/L GV/L GVE...--1, GVE , GVI...- GVE...--2, GVE , GVI...-, GVNE...--2, GVNE , GVNI...- 8
9 Close to Shoulder External Toolholders ight hand shown H1 H2 H 1 GVN26 * H1 H 2 H2 1 GVN * See page 14 for limitations. Spare Parts Insert Size Ordering Code Dimensions (mm) 26 H/LH H= H1 H2 1 2 Insert Screw Torx Key GVNE/ GVNE/ GVNE/ GVNE/ GVNE/ GVNE/ GVNE/ GVNE/ GVNE/ GVNE/ GVNE/ GVNE/ GVNE/ See insert 6.5 SGM5 0IP 9
10 Close to Shoulder External Toolholders 90 ight hand shown H1 H GVN26 * H * 2 2 H2 H2 H GVN * See page 14 for limitations. Spare Parts Insert Size Ordering Code Dimensions (mm) 26 H/LH H= H1 2 H2 Insert Screw Torx Key GVNE90/ See insert GVNE90/ GVNE90/ SGM5 0IP GVNE90/ GVNE90/ GVNE90/ or LH90 work applications use LH toolholder with H insert and vice versa. H Insert E90 - LH H Insert E90 - LH E - H E - H GVN26 GV / GVN 10
11 Close to Shoulder Internal Toolholders ight hand shown D * A H1 * See page 14 for limitations. Spare Parts Insert Size Ordering Code Dimensions (mm) H/LH D A H1 Insert Screw Torx Key GVNI/ SGM5 0IP GVNI/L or LH Internal work applications use LH toolholder with H insert and vice versa. H Insert I - LH E - H GV / GVN 11
12 External Toolholders (GV) * H1 H2 H ight hand shown 2 1 * See page 14 for limitations. Spare Parts Insert Size Ordering Code Dimensions (mm) H/LH H= H1 H2 1 2 Insert Screw Torx Key GVE/ GVE/ GVE/ GVE/ GVE/ SGM5 0IP GVE/ GVE/ GVE/
13 External Toolholders 90 (GV) * L3 H1 H ight hand shown 2 H2 H2 * See page 14 for limitations. Spare Parts Insert Size Ordering Code Dimensions (mm) H/LH H= H1 H2 L3 2 Insert Screw Torx Key GVE90/ GVE90/ GVE90/ SGM5 0IP GVE90/ Internal Toolholders (GV) D D * * H1 H1 A A ight hand shown L3 L3 * See page 14 for limitations. Spare Parts Insert Size Ordering Code Dimensions (mm) H/LH D L3 A H1 Insert Screw Torx Key GVI SGM5 0IP GVI
14 GV Toolholder Limitations GV / GVN External - Depth of Groove in elation to orkpiece Dia. Dimensions (mm) D max D max GV / GVN Internal - Depth of Groove in elation to ore Dia. Dimensions (mm) D min D D min 14
15 Groovical Technical Data ecommended Grades and Cutting Data Material Group PSteel M Stainless Steel K Cast Iron N (K) Non-errous Metals S (M) Heat esistant Material H (K) Hardened Material Vargus No. 1 Material Hardness rinell H Vc [m/min] Coated 2 Unalloyed Steel Medium Carbon (C= %) VKX Low Carbon (C= %) High Carbon (C= %) Non Hardened Low Alloy Steel (alloying elements 5%) Hardened Hardened High Alloy Steel Annealed (alloying elements>5%) Hardened Low Alloy (alloying elements <5%) Cast Steel 10 High Alloy (alloying elements >5%) Stainless Steel Non Hardened erritic Hardened Stainless Steel Austenitic Austenitic Super Austenitic Stainless Steel Non Hardened Cast erritic Hardened Stainless Steel Austenitic Cast Austenitic Hardened Malleable erritic (short chips) Cast Iron Pearlitic (long chips) Grey Cast Iron Low Tensile Strength High Tensile Strength Nodular Sg Iron erritic Pearlitic Aluminium Alloys Non Aging rought Aged Aluminium Alloys Cast Cast & Aged Aluminium Alloys Cast Si 13-22% Copper and rass Copper Alloys ronze And Non Leaded Copper Annealed (iron based) High Temperature Aged (iron based) Alloys Annealed (nickel or cobalt based) Aged (nickel or cobalt based) Titanium Alloys Pure 99.5 Ti 400m α+β Alloys 1050m Hc Extra Hard Steel Hardened & Tempered Hc or VTX Grade, increase speed by 20%. The maximum recommended feed rate is one-tenth of the insert width (). The minimum recommended depth of cut is twice the corner radius (r). 15
16 GrooVical Precise Grooving & Turning Applications Innovative Grooving & Turning Solutions VAGUS Ltd METIC EE 09/2016 EDITION 06
For Extra Large Pitches METRIC
or Extra arge Pitches METRIC or Extra arge Pitches Up to 25mm or 1 tpi Unique Design for Heavy Duty Applications VKX Vargus Tough Submicron Grade Inserts Anti-Rotation Stopper Toolholder Support Suited
More informationVG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete Range of Turning Solutions INC METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving VARGUS
More information-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
More informationThreading Inserts Identification System
THEADING Turning Tools Threading Inserts Identification ystem 16 E 1.50 IO - TC 1 2 3 4 5 6 1 Insert ize 2 Thread tyle 3 Hand of Insert L (mm) E=External =ight 11 6.35 I=Internal L=Left 16 9.525 22 12.7
More informationGROOVING INSERTS. Thread Turning Index. Back to Main Index
Grooving > Insers GOOVING INSETS Thread Turning Index Back o Main Index VADEX Ordering Code Sysem...Page 149 Exernal - DIN 471 eaining ing Grooves for Shafs...Page 150 Inernal - DIN 472 eaining ing Grooves
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationNHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
More informationKGD for Automatic Lathe
Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationReduced Chip Biting Issues when Grooving Small Parts
Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application
More informationDrills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
More informationSA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More informationNew Mini Tools Inch 2016
TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationGU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
More informationSeries Features: Diameters:.312,.375,.500,.625,.750, 1.000, 1.250, 1.500
New design indexable threadmilling inserts and tool holders allow for a profitable and effective way to produce external and internal applications quickly while generating superior surface finish. Diameters:.312,.375,.500,.625,.750,
More informationNEW. ARNO Mini-System. AMS the new modular and extremely flexible. Minimum bore diameter from 2,5 mm and bore depth up to 30 mm.
NEW Introducing AMS ANO - Mini - System www.arno.de AMS ANO -Mini-System! High productivity for machining small diameter applications. Maximum reliability, high precision and guaranteed repeatability due
More informationSECO 335 SERIES DISC MILLING RANGE ADDITIONS INNOVATION & PERFORMANCE IN NEW CUTTING WIDTHS
SECO 335 SERIES DISC MILLING RANGE ADDITIONS INNOVATION & PERFORMANCE IN NEW CUTTING WIDTHS 335.25 DISC MILLING CUTTER Seco continues to meet and exceed customer demand with the addition of two new insert
More information4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
More informationDrills Jobber, DXJ D D D D
Drills Jobber, DXJ 0840 8.4 117 75 0840 0840 0850 8.5 117 75 0850 0850 0860 8.6 81 0860 0860 00 8.7 81 00 00 03 8.73 11/32 81 03 03 0880 8.8 81 81 0880 0880 0890 8.9 8.9 81 81 0890 0890 9.0 9.0 81 81 0910
More informationGroove Milling Inserts. Grooving Inserts
Groove Milling Inserts Grooving Inserts GROOVE MILLING INSERTS VARDEX Circlip Non Stndrd Circlip DIN 471/472 O Ring DIN 3770 O Ring BS 1806, DIN 3601, DIN 3771 O Ring BS 4518 Contents Pge 250 Pge 251 Pge
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More informationMini-V Precise Turning, Grooving, Threading & Face Grooving
INERNAL MACHINING Mini-V Pecise uning, Gooving, heaing & ace Gooving MERIC Innovative Gooving & uning Solutions Mini-V Mini ools fo Small & Meium Boes he Mini-V line by Goovex offes impove solutions fo
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More informationKGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off
Grooving / Cut-Off KGD/KGDF Grooving / Cut-Off KGD/KGDF Improved Grooving Performance with Expansive ineup of Chipbreakers and s Good chip control EGACOAT coating technology for long tool life and high
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationCarbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter
for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened
More informationBridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
More informationTHREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
More informationM.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
More informationHCG - HORN Catalog Guide
CG - ORN Catalog Guide INTERNAL GROOVING Product line ore Ø 217 S274 S223 S224 231 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation
More informationImproved Grooving Performance with Expansive Tooling System Lineup
KGD/KGDF Grooving / Cut-Off Improved Grooving Performance with Expansive ooling System ineup Good Chip Control EGACOA Coating echnology for ong ool ife and igh Efficiency achining Comprehensive ineup KGD
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationHigh Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
More informationGBA. Grooving with 3 Cutting Edges. Smooth Chip Evacuation with Molded Chipbreaker
G Grooving with 3 Cutting Edges Smooth Chip Evacuation with Molded Chipbreaker Large Lineup of Chipbreakers and Grades Smooth Chip Control with GM Chipbreaker NEW ybrid N620 G Grooving with 3 Cutting Edges
More informationKOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools
KOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools Turning, Facing & Grooving System KOOL Cut Modular Turning, Facing & Grooving System-Technology KOOL Cut Graphic Index ---------------------------------------------------------------------------------------------------------------------------------
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationDrills Manufactured to National Aerospace Standards (NAS)
Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life
More informationHCG - HORN Catalog Guide
Product line Bore Ø 217 264 S274 S223 S224 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation Type HCG - HORN Catalog Guide INTERNAL
More informationEndmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
More informationDrilling Depth ( L / D) Content
Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole
More informationALU-XP E T. The Alu-XP range: Exceptional performance and reliability.
The Alu-XP range: Exceptional performance and reliability. At Europa Tool we recognise that manufacturing components consistently and cost effectively is essential. To this aim, we have produced all data
More informationinsert height A.250 B.337 chipbreaker corner radius Inch Metric.008 0, , , ,8 w Description EDP Code Inch Metric R L H A
Deep Grooving Insert Nomenclature hart VDG 125 008 vee-bottom deep grooving insert height.250.337 chipbreaker GOOVING groove idth Inch Metric.125 3,18.156 3,96.188 4,78.218 5,54.250 6,35.312 7,92.375 9,53
More informationCoated. Carbide APMX LF. Dimensions (mm) Stock Cutting diameter
AURORA ASM 000DL Type ing Corner Groove Milling Groove Finishing Face Milling Spot Facing Helical Milling Ramping Tempered Die Hardened Ti Heat Resistant Cast ron Grhite 30 0.040 0.060 Groove Milling (
More informationCERATIZIT designation system
C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,
More informationB250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER
VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change
More informationTOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationD24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30
3 Code System 02 Holder Code System Thread Inserts 24 American ACME 02 Insert Code System 25 Stub ACME 03 Technical Information for 26 28 28 UNJ (Unified Constant Thread) American Buttress (ABUT) British
More informationRotary burrs 238 PRECISION TOOLS
ROTARY BURRS 09 Rotary burrs The high-performance tungsten carbide rotary burrs provide maximum cutting edge stability with a simultaneous high tenacity of the cutting edge. Alu high-performance tungsten
More information"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool
1 HSS drilling Drilling 2 Solid carbide drilling 3 Indexable insert drilling 4 Reaming and Countersinking 5 HSS taps and dies Threading 6 Circular and Thread Milling 8 Turning Tools Turning 9 EcoCut 10
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More informationPCD & CBN TANGENTIAL MILLING
& TANGENTIAL MILLING CONTENTS Highlights 4 Codifiy 6 Shell Type 7 Cylindrical Type 8 Monoblock Type 9 Inserts 12 Adaptors 18 Setting Procedures 24 Spare Parts 26 Cutting Parameters 31 HIGHLIGHTS HIGHLIGHTS
More informationDrilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
More informationDEEP GROOVING. insert height A 6.35 B 8.43 chipbreaker. corner radius Metric Description EDP Code W R L H A
Deep Grooving Insert Nomenclature hart VDG 318 M 20 vee-bottom deep grooving insert height 6.35 8.43 chipbreaker groove width Metric 3,18 3,96 4,78 5,54 6,35 7,92 9,53 metric corner radius Metric 0.20
More informationAQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More informationGrooving Tool Holders GND Type
TOOLING NEWS E-112 P M K N S H Tool Holders Expansion 6 s of Chipbreakers Characteristics Wide range of application processes Applicable for grooving, turning, copying, facing, boring and cut-off. Achieving
More informationM.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
More informationUniversal milling tools Favora. passion for precision
Universal milling tools Favora passion for precision ToolService in Willich, Germany FRAISA thanks to tool reconditioning and material recycling www.bluecompetence.net End milling tools for
More informationHigh-performance milling cutter NVDS For up to 15 times faster penetration
passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
More informationExtremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
More informationSolid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified
Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling
More informationCutting-Off and Grooving Tools. Basic Tool holders for Recessing Blades. Cut-Off and Deep Recessing Blades
Cutting-O and Grooving Tools 1867 Recessing blade not included. For clockwise and counterclockwise operation. Basic Tool holders or Recessing Blades 1867 Size B is equal to construction height o the grooving
More informationS-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
More informationDrilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
More informationFC SERIES CUT OFF. Neutral. Competitor Description EDP Code Nomenclature Insert Width A Hand
SEIES INSET SEIES UT O eft Hand ead ngle Toolholders listed below ompetitor Description EDP ode Nomenclature Insert idth Hand 36 GP26 GP530 26 3 530-094-N 094N 507-140 3/32 (.094) 0 N -094--4 0944 507-144
More informationBurrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
More informationTOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G
TOOLS NEWS 216.1 Update B25G Carbide end mills MS plus Series Series Expansion Tough applications require ''Plus'' performance Carbide end mills MS plus General purpose end mill optimized ''plus'' performance.
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More informationHigh Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.7 Update B233B Solid Carbide Flat Bottom Drills Series Series Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
More informationKGT Series. KORLOY Grooving Tool. Multi-functional Machining with. Strong Clamping. High Productivity. Strong Clamping System
KORLOY Grooving Tool KGT Series Multi-functional Machining with Strong Clamping System Strong Clamping System Strong clamping system ensures stable and accurate machining ide Selection of Chip Breakers
More informationHigh-performance milling cutter NVDS For up to 15 times faster penetration
passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range
More informationKGT Series. KORLOY Grooving Tool. Multi-functional Machining with. Strong Clamping. High Productivity. Strong Clamping System
KORLOY Grooving Tool KGT Series Multi-functional Machining with Strong Clamping System Strong Clamping System Strong clamping system ensures stable and accurate machining ide Selection of Chip Breakers
More informationB368E MS DRILL SERIES DRILLS FOR UNIVERSAL MACHINING
MS DRILL SERIES DRILLS FOR UNIVERSAL MACHINING 2017.11 B368E MS DRILL SOLID CARBIDE DRILL SERIES A new choice of quality tooling for a superior cost peformance ratio. A versatile combination of reliable
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationJanuary /9. New Cutter with Strong Insert
1/9 New Cutter with Strong Insert 2/9 New cutter with strong insert FEATURES Higher insert thickness, stronger screw systems for heavy or demanding applications Exceptional performance at very high feed
More informationGrooving and Cut-Off.
Grooving Application Guide...........................................................D2 D3 Grades and Grade Descriptions.......................................................D4 D7 A2 Cut-Off................................................................D8
More informationALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL
90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low
More informationSR-SAF Ball nose roughing endmill
/ BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.
More informationCoatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
More informationCarbide Cutting Tool Specials
Valid until 19/12/2011 All prices are exclusive of VAT. Carriage may be extra Carbide Cutting Tool Specials 2011 Part off Blocks, Blades & Inserts interchangeable with GTN LGIH-Line LGIH 26-3S Blades new
More informationPROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
More informationYE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE
YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationand 2013 Beyond Inserts
INNOVATIONS Innovations MASTER Master Catalogue CATALOGUE A4 CUTTING Tooling TOOLS and 2013 Beyond Inserts 2013 A4 Tooling and Beyond Inserts for All Your O.D. and I.D. Applications Primary Application
More informationAquaREVO DRILLS NEW HIGHLY EFFICIENT AND MULTI-PURPOSE. Doubled tool life due to improved substrate, coating and cutting geometry
AquaREVO DRILLS HIGHLY EFFICIENT AND MULTI-PURPOSE CELEBRATE THE POLE POSITION NEW Doubled tool life due to improved substrate, coating and cutting geometry AquaREVO DRILLS STUB (3D) / REGULAR (5D) REVOlutionize
More information5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
More informationSpecial drills 88 PRECISION TOOLS
SPEIAL DRILLS 02 Special drills Spot weld miller For removing spot welds from sheet metal. Exchangeable and doubleheaded milling crown. Adjustable milling depth with setting screw. No tearing of the sheet
More informationThreadMill. For Thread Milling
ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
More informationMFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
More informationAluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
More informationAccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173
T- & GEN2 T- Durable and precise, holders provide a strong and rigid platform for the drilling of hydraulic ports. The holders precision ground insert location surfaces ensure total repeatability and simple,
More information